APT-F-LB-01 PowerTower® Center Mounted Light Bar for Forward Leaning Radar MountsCentral light bar for all forward learning PowerTowers®Compatible with:Scanstrut forward leaning PowerTower® radar mountsFeatures: All mounting holes are predrilled for easy retrofit installation, attach using mounting bolts, no extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - 316 Stainless Steel Height - 25.4" (404mm) Mount Position - Center In the Box: Light bar Instruction manual *Sold as an Individual Specifications: Construction: Aluminum Type: Light/GPS Brackets Height: 25.4 Box Dimensions: 5"H x 10"W x 25"L WT: 3 lbs UPC: 5060114797628 Quick Guide (pdf)

Read more less

APT-150-01 - Aluminum PowerTower® Radar Mount - 6" Aft LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.There is a PowerTower® to fit pretty much every modern radar.Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual  Specifications: Type: Aft Leaning Mount Construction: Aluminum Height: 5.91 Box Dimensions: 7"H x 13"W x 13"L WT: 6 lbs UPC: 5060114795402 Quick Guide (pdf)Brochure (pdf)

Read more less

APT-150-01 - Aluminum PowerTower® Radar Mount - 6" Aft Leaning - BlackThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.There is a PowerTower® to fit pretty much every modern radar.Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual  Specifications: Construction: Aluminum Type: Aft Leaning Mount Height: 5.91 Box Dimensions: 5"H x 16"W x 21"L WT: 3.4 lbs UPC: 5060114797680 Quick Guide (pdf)

Read more less

Performance Gen 3 Starlink Antenna Mount with 8 Degree Wedge Base - WhiteThe Seaview SRM300WB8 surface mount for the Starlink Performance Gen 3 Antenna has been specifically designed for the harsh marine environment. If it's good for the marine environment, then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-sides, UTVs, trucks, etc.).The SRM300WB8 kit includes a Starlink Performance Gen 3 adapter plate (ADASPG3AP) and an 8° wedge base (SVSLWB). The wedge base has pre-drilled mounting holes for easy hardware fastening and is drilled and tapped for the included CG30PW cable seal, ensuring a watertight and secure installation without the need to cut Starlink connectors.The aluminum wedge base has a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance.

Read more less

Starlink Mini Quick Release Base Mount Only for Multiple Location UseBase mount only for use with APXMINIQR for multiple mounting location applications.

Read more less

Starlink Mini Quick Release Base Mount for Single Location UseExperience seamless installation and removal with our Starlink Mini Quick-Release Removable Base Kit. Simply pull the black knob to effortlessly mount or detach your Starlink Mini—no tools necessary. Built tough with anodized 6061 aluminum and stainless steel hardware, this kit is designed to endure high winds, vibrations, and harsh conditions. The secure bracket attaches directly to your Starlink Mini antenna for a stable, reliable hold that's far superior to the Starlink kickstand.Featuring an integrated rubber bushing in the removable base, it effectively minimizes rattling caused by vibrations, ensuring quiet and consistent performance. The kit comes complete with a sturdy Mini mount bracket that locks securely into the Starlink Mini antenna base.Versatile mounting options make it ideal for any setup: bolt it directly to flat surfaces or clamp it onto tubing using the included hose clamps and protective sleeves. Upgrade your Starlink setup today for ultimate convenience and durability.

Read more less

Starlink Mini Roof MountThe Seaview APXMRM Starlink Mini Roof Mount is the ultimate surface mount solution designed primarily for rugged vehicles, including jeeps, UTVs, trucks, and more, while also suiting a range of outdoor applications like marine vessels, RVs, and overland vehicles. Ensures optimal performance for the Starlink Mini Antenna, even in extreme conditions.Ultra-Compact Mounting FootprintOne of the smallest in its class — preserves valuable deck/space real estate where most competing mounts demand far more room.Features: Heavy-Duty Construction for Rugged Durability - Crafted from marine-grade aluminum or steel, specifically designed for the marine environment, the APXMRM features a 3-part polyurethane primer and powder coat to ensure the best possible finish and exceptional corrosion resistance. This robust construction securely holds the Starlink antenna, making it ideal for the toughest terrains and climates. Enhanced Stability with Versatile Mounting Options - Equipped with quick-release knobs or security bolts, the APXMRM ensures the Starlink Mini Antenna stays firmly in place, offering flexibility for both temporary and permanent installations on moving vehicles. Its low-profile design, standing only 2" tall, maintains an aerodynamic shape. Customizable Fit for Added Protection - The mount allows the antenna to be adjusted vertically, accommodating an optional protective panel as needed, enhancing safety and adaptability across various setups. Built for Extreme Conditions - Designed with durability and safety in mind, the APXMRM includes Seaview's CG20PB small round cable seal for a waterproof cable entry, safeguarding your setup in harsh environments. Choose the APXMRM for a heavy-duty, reliable, and customizable mount that ensures your Starlink Mini Antenna performs flawlessly in any rugged condition.

Read more less

Aluminum 8° Wedge Base for Starlink Flat High-Performance Antenna - WhiteThe Seaview Aluminium 8° Wedge Base for the Starlink Flat High-Performance antenna has been specifically designed for the marine environment (chem-treated with a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). *This wedge base is a direct replacement for the gray wedge base that comes with the Starlink antenna.Features: Designed to fit the Starlink Flat High-Performance Antenna. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the cable seal that is already provided with the Starlink antenna.  No need to cut the Starlink connectors for installation. Pre-drilled with the Seaview modular top hole pattern for the option to fit on top of any Seaview modular mount. Specifications: Construction: Aluminum Type: Wedges Box Dimensions: 7"H x 15"W x 20"L WT: 4.05 lbs UPC: 850047035516

Read more less

Removable Base Kit for APXMDM Surface Mount for Starlink MiniThe optional removable base kit (APXMDMRB) can be used to easily remove the Starlink Mini antenna when needed. These are black anodized 3/8" thick aluminum strips. The removable base kit simply mounts to your desired mounting surface and is pre-drilled and tapped so that the surface mount APXMDM can mount directly on top. The removable base kit is a great option if you plan to use the Starlink Mini in more than one location.Choose the Seaview APEX APXMDM and APXMDMRB for a durable, reliable, and easy-to-remove mount that ensures your Starlink Mini Antenna performs flawlessly in any condition.

Read more less

18" Radar Mast PlatformSeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.Incredible StrengthThe solid under body construction not only greatly improves strength but also hides radar cables. On certain models.AccessoriesPre-drilled under body allows for flood lights or horns to be mounted on certain models.Compatible Manufacturers: B&G Garmin Humminbird Lowrance Raymarine SImrad Specifications: Type: Mast Mount Box Dimensions: 7"H x 13"W x 20"L WT: 8.25 lbs UPC: 839662006606 Quick Guide (pdf)

Read more less

7" x 7" Hinged Adapter*For 7"x7" base plate.*Fits 5" - 24" tall radar mounts. The Seaview Hinge adapter is the ideal solution for someone who needs extra height clearance when storing their boat. This allows the user to have their Seaview mount hinge backwards. Available for Seaview mounts with a base dimension of 7"x7", 8"x8" and 10-"x10".The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.No Tools NeededWith our captive knobs you do not need tools, and these will stay with the hinge when it's open or closed.Gain Height ClearanceSimple and easy solution to lower the height of your radar mount. The hinge adapter can hinge back 180°. Allowing you the most clearance possible. Specifications: Type: Misc Box Dimensions: 4"H x 11"W x 12"L WT: 5.3 lbs UPC: 839662002707 Quick Guide (pdf)

Read more less

Starlink Performance Gen 3 Adapter Plate for Use with Seaview or Starlink Angled Wedge Base - WhiteThe Seaview ADASPG3AP adapter plate has been specifically designed to securely mount the Starlink Performance Gen 3 Antenna to the angled wedge base originally used for the Starlink Performance Gen 2 (formerly the Flat High Performance antenna).*Note this is the adapter plate only, the angled wedge base and Starlink antenna are not included.*This adapter plate has pre-drilled mounting holes and threaded inserts to easily adapt the new Starlink Performance Gen 3 to Starlink's grey angled wedge base or Seaview's angled wedge base (SVSLWB & SVSLWBBLK).

Read more less

APEX Surface Mount for Starlink Mini - WhiteThe Seaview APEX APXMDM is the perfect direct surface mount kit designed specifically for the Starlink Mini Antenna, engineered to withstand the harshest marine environments. While it's tailored for marine use, its robust design makes it ideal for a variety of outdoor applications, including RVs, overland vehicles, vans, jeeps, UTVs, trucks, and more. The mount's design includes a slight angle to the Starlink antenna, promoting moisture runoff and ensuring optimal performance.The APXMDM features end caps made from machined marine-grade high-density polyethylene, renowned for its exceptional finish and corrosion resistance. These end caps are securely attached to black hard-anodized aluminum strips, providing the strength needed to firmly mount the Starlink Mini antenna on any flat surface, whether stationary or in motion.Enhanced Support for Mobile ApplicationsWhile the Starlink Mini Antenna comes with a pressure-fit kickstand suitable for flat, non-mobile surfaces, it requires additional support when mounted on a vehicle or other fast-moving vessel. The Seaview APXMDM mount offers a reliable and easily assembled solution, ensuring your antenna stays securely in place.Complete with Waterproof Cable SealIncluded with the APXMDM is Seaview's CG2090W horizontal cable seal, providing a waterproof entry point for your cables, essential for maintaining the integrity of your setup in any environment.Optional Removable Base KitFor added convenience, you can opt for the optional removable base kit (APXMDMRB) to easily remove the Starlink Mini antenna when needed.Choose the Seaview APEX APXMDM for a durable, reliable, and easy-to-install mount that ensures your Starlink Mini Antenna performs flawlessly in any condition.

Read more less

Gen 3 Standard Starlink Antenna Mount with 8 Degree Wedge Base - WhiteThe Seaview SRM200WB8 Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) that has been specifically designed for the harsh marine environment. If its good for the marine environment then its ideal for any other outdoor application (RVs, overland vehicle, vans, jeeps, side by side, UTV, trucks, etc.). The base aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.The Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, for marine or vehicle mounting, it necessitates additional support. Opting for the Seaview SRM200WB8 mount is a superior choice, offering a reliable and adaptable mounting solution. Wedge Base Features: Designed to fit the Starlink Flat High-Performance Antenna and Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna.  Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base. No need to cut the Starlink connectors for installation. Available in white or black

Read more less

CAM-PT-150-02 Aluminum PowerTower® for Cameras - 6"The ingenious Camera Power Mount solves the problem of finding a level mounting surface to install cameras onto your powerboat, commercial vessel, RIB or sailboat wheelhouse.Compatible with: FLIR - M100 / M200, M132, M232 cameras IRIS s118, s290, s295, s390, s395, s418 cameras Features: Designed to fit the most up to date cameras Pre-drilled mounting holes allow the camera to fasten straight to the PowerTower® No need to cut the cameras connectors off for installation  Constructed from Marine grade Aluminium Technical Specifications: Material - Aluminium Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual Specifications: Construction: Powder Coated Aluminum Type: Aft Leaning Mount Height: 6 Box Dimensions: 8"H x 8"W x 8"L WT: 5 lbs UPC: 5060114796171 Quick Guide (pdf)

Read more less

28" Pre-Drilled Dual Mount for Open Array Radars Up to 4.5' - Black - Top Plate RequiredInstall your sat dome, camera, or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. The oval hollow mast section allows for easy cable management.Compact DesignSpecifically designed to not take up a large number of space results in the perfect solution where space saving is a must.  Eliminate InterferenceA Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for a cleaner installation.UniversalThe lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or an open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.  Modular Top PlateThe top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. *Top Plate Sold Seperately Specifications: Height: 28" Type: Dual Mount Box Dimensions: 13"H x 14"W x 54"L WT: 32.3 lbs UPC: 727908835700 Quick Guide (pdf)

Read more less

Open Array Plate 1 for all Open Array RadarsThe Modular Dual PowerTower has been designed to allow your open array, radar, Satcom and camera to be mounted together in one single space-saving modular installation.Open Array plate 1 (For all Open Array Radar models) Specifications: Type: Adapters Construction: Powder Coated Aluminum Box Dimensions: 3"H x 11"W x 12"L WT: 3.8 lbs UPC: 5060114796362

Read more less

Attwood LED 12V Combination Anchor/Streaming LightEdson offers the 67510 Attwood LED Anchor/Steaming Light (72" Wire Length) that is specifically designed for Edson's Vision Series Light Arms. With 3NM of 360° visibility while drawing a fraction of the power of traditional incandescent lights, Attwood's 3NM LED Masthead/Anchor light is one of the first of its kind. Constructed of corrosion resistant composites with stainless steel accents, this product was designed for the harsh coastal marine environment. For use on boats up to 65.6 ft. (20 meters)The 67510 Attwood LED Anchor/Steaming Light requires an Edson Light Arm that is secured to a Vision Series Base Mount with a Light Arm Receiver and Radar Mounting Plate. Order Edson's Light Arm, Light Arm Receiver,  Base Mount and Mounting Plate separately. Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 3"W x 4"L WT: 0.4 lbs UPC: 796744675108

Read more less

Light Bar Top - WhiteWhite universal box top for all-round, masthead, and stern (lights not included).

Read more less

Gen 3 Standard Starlink Antenna Mount Top Plate - Fits Mounts Ending in M1 & M2The Seaview modular top plate ADAG3 for the Gen 3 Standard Starlink Antenna (and sometimes the Gen 4/Standard) is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a waterproof grommet in the center for cable routing.The Gen 3 Standard Starlink Antenna (sometimes Gen 4/Standard) now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview ADAG3 modular top plate is a superior choice, offering a very secure and easily assembled mounting solution.

Read more less

2 Degree Wedge for Power MountThe most common planing attitude requires 3° - 4° of adjustment. If you are unsure which to choose then we recommend the 4° wedge. We do however offer 2° & 6° wedges if you feel a little more a little less is better for your application.Features: Pre-drilled mounting holes allow for quick and easy installation Made from marine-grade polymer Specifications: Type: Wedges Box Dimensions: 2"H x 9"W x 10"L WT: 0.7 lbs UPC: 839662003377 Quick Guide (pdf)

Read more less

Self Levelling Radar Mount - MastCompatible Units: Garmin GMR18/GMR18HD/GMR24HD Raymarine RD218/RD424 Lowrance 3G Broadband Simrad 3G Broadband Simrad DX45/DX60 The Self-Levelling Mast Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture.Using our own fine-tuned hydraulic damping system, the radar mount reacts to major changes in the heel angle of the boat whilst eliminating all small oscillations.Features: Hydraulic damping to eliminate minor oscillations Sealed system - entirely maintenance-free Passive system - no power required Reduced weight aloft - complete system weighs only 3.4 kg Easy upgrade from fixed mast mount - same mounting footprint as SC20 & M92722 Attached to the mast by four swivel feet - matches the profile of any mast 12 point fixing - highest quality Monel rivets Compact mount - radar extends only minimum distance from front of mast Materials: Finest quality machined and anodised aluminium mast adapter Marine grade 316 stainless steel cradle and base plate Kit Includes: 1 x Levelling mount 1 x Mast Adapter 1 x Complete fastening pack Specifications: Construction: Stainless Steel Type: Self Leveling Box Dimensions: 6"H x 16"W x 16"L WT: 10 lbs UPC: 5060114791152

Read more less

Mast MountsCompatible Units: Raymarine: 2kW Radome Fantom 24 GMR24HD / 24xHD Still the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation.Features Easy and quick to install with all fastenings supplied Attached to mast by four swivel feet matching the profile of any mast 12 point fixing using highest quality Monel rivets for a secure installation Nylon washers for all fastenings to protect paint finish Waterproof cable grommet included to seal cable entry into mast Materials Marine grade 6082 aluminium Polyester powder coated for a durable and gloss white finish Kit includes 1 x Mast Mount 4 x Swivel mounting feet 1 x Complete fastening pack Specifications: Construction: Powder Coated Aluminum Type: Mast Mount Box Dimensions: 5"H x 12"W x 21"L WT: 4.85 lbs UPC: 5060114790063 Quick Guide (pdf)

Read more less

16" Modular Mount AFT Raked 7" x 7" Base Plate - Top Plate RequiredThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost effective choice. Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Specifications: Type: Aft Leaning Mount Height: 16" Box Dimensions: 12"H x 12"W x 20"L WT: 7.9 lbs UPC: 839662008983 Quick Guide (pdf)

Read more less

Starlink High Performance 16" Pedestal Mount with ADASTLKA Starlink Top PlateSeaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV. Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high performance terminal.Features: Powder-coated aluminum pedestal mount. The top of the pedestal has a modular top that can fit the Starlink wedge base. *The ADASTLKA top plate cannot support a light bar Specifications: Construction: Aluminum Height: 16" Type: Aft Leaning Mount Box Dimensions: 3"H x 14"W x 14"L WT: 11.45 lbs

Read more less

5" Thermal Camera Mount f/FLIR M100 & M200 - 8" Round BaseGet the most out of your FLIR M100 or M200 camera with the Seaview PM5-FMH-8 camera mount. This mount will raise your camera 5.5" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.Extra SecurityNo visible bolts on the camera mounting plate provides extra security and improved aesthetics.Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Specifications: Type: Vertical Mount Height: 5" Box Dimensions: 7"H x 10"W x 10"L WT: 3.9 lbs UPC: 015568089824 Quick Guide (pdf)

Read more less

Mast Mounts For 18" Garmin, KVH M3 & Raymarine 37STVCompatible Units: Garmin GMR18/GMR18HD/18Xhd/18HD+/Fantom18/GMR40 B&G / Lowrance /Simrad DX45/3G/4G / HALO20 / HALO20+ Intellian i3 KVH TracVision M2/M3 Raymarine 37STV /Quantum / Quantum 2 Sea Tel Coastal 14 Still the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation.Features Easy and quick to install with all fastenings supplied Attached to mast by four swivel feet matching the profile of any mast 12 point fixing using highest quality Monel rivets for a secure installation Nylon washers for all fastenings to protect paint finish Waterproof cable grommet included to seal cable entry into mast Materials Marine grade 6082 aluminum Polyester powder coated for a durable and gloss white finish Kit includes 1 x Mast Mount 4 x Swivel mounting feet 1 x Complete fastening pack Specifications: Construction: Powder Coated Aluminum Type: Mast Mount Box Dimensions: 5"H x 12"W x 20"L WT: 5.25 lbs UPC: 5060114790902 Quick Guide (pdf)

Read more less

12" AFT Leaning Mount for Searchlights & Thermal Cameras with 7" x 7" Base PlateSeaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″.Cable ManagementA hollow oval mast section provides plenty of room for cable management.Space-Saving DesignThe small 7"x 7" base footprint makes this a great solution to an installation where space is an issue.  Specifications: Type: Aft Leaning Mount Height: 12" Box Dimensions: 11"H x 11"W x 20"L WT: 6.9 lbs UPC: 839662009355

Read more less

Starlink Performance Gen 3 Modular Top Plate for Mounts Ending in M1 & M2 - BlackThe Seaview modular top plate ADASPG3 for the Starlink Performance Gen3 Antenna is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2 and is light bar compatible. The optional light bar for this would be the LTBR and sold separately.The plate is machined from marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a grommet in the center for water-resistant cable routing.

Read more less

Mast Mount for FLIR M300 Series Fits Mast with 2-5/8" or LargerAchieve an unobstructed view for your FLIR or Raymarine thermal camera by mounting it on your mast. Made from marine grade aluminum. We now Chem-Film (same process used by Boeing) each high grade aluminum part prior to our standard 3 part epoxy prime and powder coat to ensure the best possible finish and corrosion resistance.Heavy DutySix rivets per foot are used to hold the heavy duty mounting feet to the mast. Solid under-body construction not only greatly improves strength but also hides cables. Specifications: Type: Mast Mount Box Dimensions: 6"H x 12"W x 20"L WT: 7.95 lbs UPC: 727908835540 Quick Guide (pdf)

Read more less

18" Modular Mount Vertical 8" Round Base Plate - Top Plate RequiredThis Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. Specifications: Type: Vertical Mount Height: 18" Box Dimensions: 13"H x 13"W x 20"L WT: 8.6 lbs UPC: 839662009102 Quick Guide (pdf)

Read more less

Camera PowerTower - White - 6"Maximize your camera's performance with our expertly designed camera PowerTower.Perfect for installing on the cabin roof, flybridge, or radar arch of your powerboat. Designed to mount Sionyx Nightwave, FLIR, Raymarine, VEI & NVTI cameras.Get ready to set your sights on new horizons with the CAM-PT-150-01. Designed specifically for the FLIR, Raymarine, VEI & NVTI cameras. The CAM-PT-150-01 ensures ease of installation, allowing the camera to fasten straight to the Camera PowerTower. Experience long-lasting high performance due to the clever design that eliminates the need for marine sealant. By adhering to the Scanstrut 4-step marine paint system, your PowerTower will stay looking smart, no matter what the sea throws at it!Features: Compact mounting profile to ensure a neat installation Pre-drilled mounting holes allow the camera to fasten straight to the Camera PowerTower Marine sealant is not required Paint finishes comply with our unique 4-step marine paint system Designed specifically for FLIR, Raymarine, VEI & NVTI cameras Specifications: Material: Aluminum Height: 150mm (5.9") Color: White Mounting Gasket Included: Yes Design: Aft (25-degree rake) Specifications: Construction: Aluminum Box Dimensions: 5"H x 7"W x 7"L WT: 1.6 lbs UPC: 5060114799301

Read more less

Camera PowerTower - Black - 6"Maximize your camera's performance with our expertly designed camera PowerTower.Perfect for installing on the cabin roof, flybridge, or radar arch of your powerboat. Designed to mount Sionyx Nightwave, FLIR, Raymarine, VEI & NVTI cameras. Get ready to set your sights on new horizons with the CAM-PT-150-01. Designed specifically for the FLIR, Raymarine, VEI & NVTI cameras. The CAM-PT-150-01 ensures ease of installation, allowing the camera to fasten straight to the Camera PowerTower. Experience long-lasting high performance due to the clever design that eliminates the need for marine sealant. By adhering to the Scanstrut 4-step marine paint system, your PowerTower will stay looking smart, no matter what the sea throws at it!Features: Compact mounting profile to ensure a neat installation Pre-drilled mounting holes allow the camera to fasten straight to the Camera PowerTower Marine sealant is not required Paint finishes comply with our unique 4-step marine paint system Designed specifically for FLIR, Raymarine, VEI & NVTI cameras Specifications: Material: Aluminum Height: 150mm (5.9") Color: White Mounting Gasket Included: Yes Design: Aft (25-degree rake) Specifications: Construction: Aluminum Box Dimensions: 5"H x 8"W x 11"L WT: 1.8 lbs UPC: 5060114799455

Read more less

Starlink Performance Gen 3 Modular Top Plate for Mounts Ending in M1 & M2 - WhiteThe Seaview modular top plate ADASPG3 for the Starlink Performance Gen3 Antenna is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2 and is light bar compatible. The optional light bar for this would be the LTBR and sold separately.The plate is machined from marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a grommet in the center for water-resistant cable routing.

Read more less

Starlink Wedge Base & C5 Certified Lighting Kit - WhiteThis Seaview wedge base kit caters to installations with restricted space, where additional height isn't required, yet an LED navigation light remains essential.This kit comes with all the Seaview parts necessary to install the Starlink Flat High-Performance antenna on the 8° wedge base, along with the 3NM C5 certified LED combination mast head all-round light. The LED light is IP67 watertight with 7' of wire (12v) and USCG-approved for boats up to 20 meters (65.6') in length.The aluminum light bar and 8° wedge base for the Starlink Flat High-Performance antenna have been specifically designed for the marine environment (3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).Wedge Base Features: Designed to fit the Starlink Flat High-Performance Antenna and Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna.  Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base. No need to cut the Starlink connectors for installation Included Items: ADAR1DMLTB - Top Plate SVSLWB - Wedge Base LTBR - Light Bar LTBLED12C5 - Navigation Light

Read more less

Removable Base for Pedestal Mounts with 7x7 Base Plate - WhiteThese innovative mounts save time, money, and headaches for many different types of boat owners. Designed with a self-draining waterproof base, these removable bases make removing/servicing/securing/installing high-value marine electronics easier than ever. Four captive knobs for easy and quick release without fear of losing a knob.Note: The black knobs are captive so they will not fall off.

Read more less

Mast Mount for Starlink MiniThis SM18SLM Seaview Mast Mount for the Starlink Mini antenna has been specifically designed for the marine environment (chem-treated with a 3 part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). Ultra heavy-duty mounting feet and rivets are used to secure the Mast Mount to the mast. Fits a mast or tube diameter greater than or equal to 2 5/8 in. (66.68mm) The solid under body construction not only greatly improves strength but also hides cables. Pre-drilled underbody allows for flood lights or horns to be mounted if desired.

Read more less

Compact Light Bar for Thermal Cameras, Low-Light Cameras, & Search Lights (To Clear Closed Dome Radars) - No LightSeaview light bars are made from aluminum and powder-coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars are also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many (LTBR, LTBS, LTB12, LTBS24) can fold over 90° to allow for extra height clearance. *The LTBSF4 and LTBSF5 will clear most 18-24" closed dome radars using the ADAR1 top plate. If using Raymarine RD424 or Garmin Fantom 24, top plate ADAR1DMLTB must be used.

Read more less

Mast Mount for Starlink Standard Gen 3 AntennaThis Seaview Mast Mount for the Starlink Standard Gen3 antenna has been specifically designed for the marine environment (chem-treated with a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). Ultra heavy-duty mounting feet and rivets are used to secure the Mast Mount to the mast. Fits a mast or tube diameter greater than or equal to 3.63" (92mm). The solid under-body construction not only greatly improves strength but also hides cables. Pre-drilled underbody allows for flood lights or horns to be mounted if desired.

Read more less

Starlink Mini Antenna Mount Top Plate - Fits Mounts Ending in M1 & M2The Seaview modular top plate ADAMINI for the MINI Starlink Antenna is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a waterproof grommet in the center for cable routing.The MINI Starlink Antenna now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview ADAMINI modular top plate is a superior choice, offering a very secure and easily assembled mounting solution.

Read more less

Triple Mount Adapter with C5 Certified LED Light 12" Post and Threaded 1"-14 Thread Bases for GPS UnitsLight bar top with an LED light on a 12" post and 2 threaded 1-14 bases for GPS units. Specifications: Height: 12" Type: Light/GPS Brackets Box Dimensions: 5"H x 13"W x 13"L WT: 4.6 lbs UPC: 850047035998

Read more less

Removable Base Kit for APXG3DMV2 Surface Mount for Starlink Standard Gen 3 AntennaThe optional removable base kit (APXG3DMRBV2) can be used to easily remove the Starlink Standard Gen3 antenna when needed. These are black anodized 3/8" thick aluminum strips. The removable base kit simply mounts to your desired mounting surface and is pre-drilled and tapped so that the surface mount APXG3DMV2 (white) or APXG3DMV2BLK (black) can mount directly on top. The removable base kit is a great option if you plan to use the Starlink Standard Gen3 in more than one location.Choose the Seaview APEX APXG3DMV2 and APXG3DMRBV2 for a durable, reliable, and easy-to-remove mount that ensures your Starlink Standard Gen3 Antenna performs flawlessly in any condition. Specifications: Construction: Aluminum Type: Mounting Brackets Box Dimensions: 5"H x 5"W x 20"L WT: 2.7 lbs UPC: 850047035929

Read more less

5" Vertical Camera Mount for Sionyx - BlackGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct the view of your camera. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation.Extra SecurityNo visible bolts on the camera mounting plate provide extra security and improved aesthetics.Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Specifications: Height: 5" Type: Vertical Mount Box Dimensions: 7"H x 10"W x 10"L WT: 3.45 lbs UPC: 850047035394

Read more less

5.5" Thermal Camera Mount for FLIR M300 Series CamerasSeaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″.Cable Management A hollow oval mast section provides plenty of room for cable management.Space Saving DesignThe small 7"x 7" base footprint makes this a great solution to an installation where space is an issue. Specifications: Height: 5.5" Type: Aft Leaning Mount Box Dimensions: 7"H x 12"W x 12"L WT: 7.5 lbs UPC: 727908835526 Quick Guide (pdf)

Read more less

Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top Plate - BlackSeaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV. Pair your Seaview pedestal mount with the Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.Features: Powder-coated aluminum pedestal mount. The top of the pedestal has a modular top that can fit the Starlink wedge base. *The ADASTLKA top plate cannot support a light bar Specifications: Construction: Aluminum Height: 5" Type: Aft Leaning Mount Box Dimensions: 3"H x 14"W x 14"L WT: 8.9 lbs Quick Guide (pdf)

Read more less

Aluminum 8° Wedge Base for Starlink Flat High-Performance Antenna - BlackThe Seaview Aluminium 8° Wedge Base for the Starlink Flat High-Performance antenna has been specifically designed for the marine environment (chem-treated with a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). *This wedge base is a direct replacement for the gray wedge base that comes with the Starlink antenna.Features: Designed to fit the Starlink Flat High-Performance Antenna. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the cable seal that is already provided with the Starlink antenna.  No need to cut the Starlink connectors for installation. Pre-drilled with the Seaview modular top hole pattern for the option to fit on top of any Seaview modular mount. Specifications: Construction: Aluminum Type: Wedges Box Dimensions: 7"H x 15"W x 21"L WT: 4.15 lbs UPC: 850047035523

Read more less

4-Degree Wedge for Most Closed Dome Radars - 18"-24" - BlackImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more!Features: Simple and Easy Installation Pre-drilled to fit your specific radar, allowing for quick and easy hassle-free installation.  Durable Made from marine-grade polymer Compatible Manufacturers: B & G Garmin Humminbird Koden Lowrance Raymarine Simrad

Read more less

Starlink Maritime Top Plate for Seaview M1 Style Modular MountsSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.Features:  Water-tight gasket in the center of the plate to pass the Starlink cable Predrilled and all hardware needed to mount the Starlink is included *Not light bar compatible Quick Guide (pdf)

Read more less