5" Vertical Camera Mount for SionyxGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct the view of your camera. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation.Extra SecurityNo visible bolts on the camera mounting plate provide extra security and improved aesthetics.Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Specifications: Height: 5" Type: Vertical Mount Box Dimensions: 7"H x 10"W x 10"L WT: 2.25 lbs UPC: 850047035189

Read more less

Starlink Maritime Top Plate for Seaview M1 Style Modular Mounts - BlackSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "Swiss Cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.Features:  Water-tight gasket in the center of the plate to pass the Starlink cable Predrilled and all hardware needed to mount the Starlink is included *Not light bar compatible Quick Guide (pdf)

Read more less

Starlink High Performance 10" Pedestal Mount with ADASTLKA Starlink Top PlateSeaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV. Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.Features: Powder-coated aluminum pedestal mount. The top of the pedestal has a modular top that can fit the Starlink wedge base. *The ADASTLKA top plate cannot support a light bar Specifications: Construction: Aluminum Height: 10" Type: Aft Leaning Mount Box Dimensions: 3"H x 14"W x 14"L WT: 10.75 lbs

Read more less

6.38" Vertical Searchlight & Thermal Camera Mount with 8" Round Base PlateGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your camera's view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation. Extra SecurityNo visible bolts on the camera mounting plate provide extra security and improved aesthetics. Small Base FootprintThis mount is the perfect solution for installations where space is limited. Specifications: Type: Vertical Mount Height: 6.38" Box Dimensions: 7"H x 10"W x 10"L WT: 5.2 lbs UPC: 839662004800 Quick Guide (pdf)

Read more less

Black Modular Plate for FLIR M300 Series Thermal Cameras for Mounts Ending in M1 or M2Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics. Quick Guide (pdf)

Read more less

Starlink Maritime Top Plate for Seaview M1 & M2 Style Modular MountsSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.Features: Starlink Wedge Base hole pattern pre-dimpled in this modular top plate Water-tight gasket in the center of the plate to pass the Starlink cable The 1” thick starboard plate can accommodate a Seaview light bar Quick Guide (pdf)

Read more less

Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top PlateSeaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV. Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.Features: Powder-coated aluminum pedestal mount. The top of the pedestal has a modular top that can fit the Starlink wedge base. *The ADASTLKA top plate cannot support a light bar Specifications: Construction: Aluminum Height: 5" Type: Aft Leaning Mount Box Dimensions: 3"H x 14"W x 14"L WT: 9.55 lbs Quick Guide (pdf)

Read more less

Starlink Modular Top Plate with Starlink Stainless Steel 1"-14 Threaded Adapter & Stainless Steel BaseStarlink quick-release top plate for Seaview "M1" and "M2" style mounts.Features: 316L stainless steel Starlink adapter with a 1"-14 threaded fixed base on ¼” aluminum plate The top of the adapter is machined to fit the Starlink antenna post The adapter with the fixed base and modular plate is 4 1/4” tall The ¼” aluminum plate is powder-coated white and can accommodate a Seaview light bar Specifications: Construction: Stainless Steel Box Dimensions: 3"H x 13"W x 13"L WT: 4.1 lbs UPC: 850047035004 Quick Guide (pdf)

Read more less

Starlink Adapter Plate for 24" KVH Domes with Starlink Stainless Steel 1"-14 Threaded Adapter & Stainless Steel Fixed BaseFeatures: 316L stainless steel Starlink adapter with a 1"-14 threaded fixed base on ¼” aluminum plate The ¼” aluminum plate is powder-coated white and fits inside an empty KVH 24” dome Specifications: Construction: Stainless Steel Box Dimensions: 5"H x 20"W x 20"L WT: 7.8 lbs UPC: 850047035011 Quick Guide (pdf)

Read more less

Modular Plate to Fit Searchlights & Thermal Cameras on Seaview Mounts Ending in M1 or M2The Seaview ADABLANK is a universal modular top plate for mounting a searchlight or thermal camera for Seaview Modular Mounts ending in M1 or M2.King StarboardTop Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean-looking installation. Specifications: Type: Adapters Box Dimensions: 3"H x 14"W x 14"L WT: 3.45 lbs UPC: 015568068645 Quick Guide (pdf)

Read more less

5.25" AFT Leaning Mount for Searchlights & Thermal Cameras with 7" x 7" Base PlateSeaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″.Cable ManagementA hollow oval mast section provides plenty of room for cable management.Space-Saving DesignThe small 7"x 7" base footprint makes this a great solution to an installation where space is an issue.  Specifications: Type: Aft Leaning Mount Height: 5.25" Box Dimensions: 9"H x 9"W x 13"L WT: 5.3 lbs UPC: 839662009348

Read more less

5.5" Thermal Camera Mount Aft Leaning for M100 & M200 SeriesGet the most out of your FLIR M100 and M200 Series Thermal Camera with Seaview's Aft-Leaning Camera Mount. Measuring 5.5" tall, the Seaview Aft-Leaning Camera Mount provides flexibility in any installation, especially when saving space is a top priority. Features: 5.5" Tall, Aft-Leaning Mount compatible with FLIR M100 and M200 Series Thermal Cameras Elevates electronics for optimum performance and allows for flexibility in installation Hollow, oval heavy-duty mast section supports mounted electronics and allows for convenient cable/wiring management Pre-drilled, 7" x 7" base footprint allows for a simple and easy installation Compatible Units: FLIR M132 FLIR M232 Specifications: Orientation: Aft-leaning Material: Marine-grade aluminum Finish: Powder coated white Specifications: Type: Aft Leaning Mount Height: 5.5" Box Dimensions: 6"H x 9"W x 10"L WT: 2.5 lbs UPC: 015568084768

Read more less

LTB-90 Light Bar Clamp f/LTB-R, LTB-S LTB-S24 & LTB-13 Light bars, allows for quick fold over of Light BarThe LTB90 from Seaview is an add-on component that aids in a quick, tool-free fold over for a Seaview light bar. Great for trailering, dry-stack storage, and winter wrapping your vessel. This kit will only work with Seaview top plates ADAR1, ADAS1 & ADAS2 when spreaders are NOT usedCompatible with: LTBR LTBS LTBS24 LTB13 LTBRSS Specifications: Type: Light/GPS Brackets Box Dimensions: 4"H x 5"W x 5"L WT: 0.35 lbs UPC: 727908835120

Read more less

RW4-5 Degree Wedge Mount for Simrad TX06S & TX10SImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Simple & Easy InstallationPre-drilled to fit your specific radar, allowing for quick and easy hassle free installation.DurableMade from marine grade polymer King Starboard. Specifications: Construction: Polymer Type: Wedges Box Dimensions: 2"H x 13"W x 13"L WT: 2.3 lbs UPC: 839662002097 Quick Guide (pdf)

Read more less

1-1/4" Light Bar for Closed Domes Requires LTB Top - BlackSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts. These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters and etc. What's also unique with Seaview light bars is that they can fold over 90° to allow for extra height clearance.Many StylesThere are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights. Extra Height ClearanceOn select Seaview light bar models some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction. Only LTB-R, LTB-S and LTB-S24 can fold over. Easy InstallationSecured with a stainless steel clamp, simply use the supplied four bolts. This does not apply to the LTB-SF, LTB-OA and LTB-OA-6 light bars. Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 12"W x 31"L WT: 2.4 lbs UPC: 727908835397 Quick Guide (pdf)

Read more less

Mast Bracket with Flybridge Adapter Kit18" Radar Mast Platform with Flybridge Adapter Kit. Sailboat and Trawler Radar Mast Platforms.Features: Anodized Marine Grade Aluminum and Powder Coated Brilliant White Heavy duty swiveling feet fit most mast and poles adding more strength and durability to platforms Models available for all brands of radomes Specifications: Construction: Aluminum Type: Mast Mount Box Dimensions: 6"H x 12"W x 20"L WT: 7.9 lbs UPC: 727908835625

Read more less

16.75" Dual Mount Pre-Drilled for Most Closed Dome Radars Top for FLIR Searchlight Satellite DomesInstall your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management. Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.Eliminate Interference  A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation. UniversalThe lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount. Modular Top PlateThe top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. Specifications: Type: Dual Mount Height: 16.75" Box Dimensions: 14"H x 18"W x 36"L WT: 26 lbs UPC: 727908835137 Quick Guide (pdf)

Read more less

2" Diameter Compact Light Bar f/Thermal Cameras, Spotlights & Nav Light To Clear Closed Dome Radars *Must Pick an LTB TOPA compact 2” diameter light bar designed to fit Seaview modular mounts that will elevate most searchlights, thermal cameras with the universal plate, and a nav light above closed dome radars. This will clear 18-24" diameter closed dome radars with the exception of Raymarine RD424. Works with Mounts ending in M1 or M2.* Will work for all FLIR models, WITH THE EXCEPTION OF THE FLIR M300C, M332, M364, M364C** Will clear 18"-24" closed dome radars, WITH THE EXCEPTION OF THE RAYMARINE RD424 Specifications: Type: Light/GPS Brackets Box Dimensions: 12"H x 12"W x 37"L WT: 10.45 lbs UPC: 727908835748 Quick Guide (pdf)

Read more less

5" Modular Mount Aft Raked 7x7 Base Top Plate Required - BlackThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost effective choice. A Seaview Modular Top Plate is required and sold separately!Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately. Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Specifications: Type: Aft Leaning Mount Height: 5" Box Dimensions: 7"H x 11"W x 12"L WT: 5.4 lbs UPC: 727908835410 Quick Guide (pdf)

Read more less

PM5FM38 Thermal Camera Mount for FLIR M300 Series Vertical 8"Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.63" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation. Extra Security No visible bolts on the camera mounting plate provides extra security and improved aesthetics. Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Specifications: Type: Vertical Mount Height: 8" Box Dimensions: 7"H x 13"W x 13"L WT: 5.5 lbs UPC: 727908835519 Quick Guide (pdf)

Read more less

Modular Plate for Most Closed Domes & Open Arrays - BlackSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics. Unique DesignNo longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.Note: This only applies to the ADA-R1, ADA-S1 & ADA-S2 Top PlatesKing StarboardThe ADA-R2, ADA-S3, ADA-S4 & ADA-F1 Top Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation. Specifications: Type: Adapters Box Dimensions: 3"H x 14"W x 14"L WT: 4.8 lbs UPC: 727908835441 Quick Guide (pdf)

Read more less

ADAF3 Modular Top Plate for FLIR M300 Series Thermal Cameras f/Mounts Ending in M1 or M2Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics. Unique DesignNo longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.Note: This only applies to the ADA-R1, ADA-S1 & ADA-S2 Top PlatesKing StarboardThe ADA-R2, ADA-S3, ADA-S4 & ADA-F1 Top Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation. Specifications: Type: Adapters Box Dimensions: 3"H x 14"W x 14"L WT: 3.4 lbs UPC: 727908835496 Quick Guide (pdf)

Read more less

1-1/4" Light Bar 13" for FLIR & Searchlights Fold Over - 90° - Must Pick a LTB TopSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance Many StylesThere are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.Easy InstallationSecured with a stainless steel clamp, simply use the supplied four bolts.  Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 15"W x 15"L WT: 3.2 lbs UPC: 727908835113 Quick Guide (pdf)

Read more less

Direct Mount 4° Wedge f/Simrad HALO™ Open Array RadarImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more! Simple and Easy InstallationPre-drilled to fit your specific radar, allowing for quick and easy hassle free installation. DurableMade from marine grade polymer Specifications: Type: Wedges Box Dimensions: 2"H x 11"W x 11"L WT: 2.3 lbs UPC: 015568089794 Quick Guide (pdf)

Read more less

Adapter Plate for Simrad HALO™ Open Array Radar Use for Modular Mounts - ADA-R1 RequiredThe Seaview Top Plates are made from a pre-drilled plate that has been incased in a UV resistant ABS plastic. Drill templates come with all Seaview Top Plates. Simply drill the holes that are marked to your specific Simrad electronic. This makes for a very clean installation with no unecessary holes. Specifications: Construction: Aluminum Type: Adapters Box Dimensions: 3"H x 13"W x 13"L WT: 4.4 lbs UPC: 015568089787 Quick Guide (pdf)

Read more less

Seaview Stainless Steel Guard for 12-20" Radar DomesProtect your radome from damage and reduce wear and tear on the sails with Seaview Mast Mount Guards. Manufactured from marine grade 316 stainless steel and finished with a high polish. No extra fastenings required, mounted using the radome bolts. Fits easily between the mast mount and radar antenna. Compatible Units: Furuno - 15" - 18" Radomes, DRS42 (1st Watch) Garmin - GMR18(HD), GMR18x(HD) Radomes  JRC - JUE 250, JUE 33 (14")  Koden - 18" (MDC 900 Series) Radomes  Lorenz - 12" - 24" Radomes  Lowrance - 3G, 4G Radomes  Raymarine - 18" Radomes, 33STV, 37STV, 45STV  Seiwa/Tech Marine - 12" - 24" Radomes  Simrad - 3G, 4G, HALO20  Sitex - 18" (T760/T921) Radomes Thrane & Thrane - FB150, FB250, Fleet33, Fleet33+  Specifications: Type: Radar Guards Box Dimensions: 4"H x 22"W x 22"L WT: 6.6 lbs UPC: 839662005753 Quick Guide (pdf)

Read more less

Direct Mount Adapter Plate for Simrad HALO™ Open Array RadarSeaview's Simrad HALO™ adapter plate is a great solution when replacing an existing Simrad Broadband 3G™, Broadband 4G™, Raymarine or Garmin closed dome radar. Mounting holes pick up existing radar brands mentioned above and the Simrad HALO™ open array. Specifications: Type: Adapters Box Dimensions: 3"H x 13"W x 13"L WT: 3.8 lbs UPC: 015568089770 Quick Guide (pdf)

Read more less

12" Aft Leaning Camera MountGet the most out of your camera by using a Seaview Camera Mount. This Camera Mount is 12.5" tall and is aft leaning. The four pre-drilled 7″ × 7″ base plate makes it very simple and easy to install.Cable ManagementA hollow oval mast section provides plenty of room for cable management.Space Saving DesignThe small 7"x 7" base foot print makes this a great solution to an installation where space is an issue.Fits: Raymarine - T200,T300,T400 Flir - MD324, MD625, M625S, M625CS, M612L, M617CS, M618CS Comnav - Explorer V2, V3 Specifications: Type: Aft Leaning Mount Height: 12" Box Dimensions: 13"H x 13"W x 17"L WT: 6.4 lbs UPC: 839662009331

Read more less

4° Wedge for 10x10 BaseThis Seaview Base Wedge angles your radar down 4 degrees allowing your radar to be level when the boats bow is up. Will fit all Seaview mounts with a 10″×10″ base plate.Features: Pre-drilled mounting holes allow for quick and easy installation Made from marine-grade polymer Specifications: Type: Wedges Box Dimensions: 3"H x 13"W x 13"L WT: 2.8 lbs UPC: 839662002622 Quick Guide (pdf)

Read more less

Top Plate for FLIR M100 & M200This Seaview top plate is for FLIR M100 or M200 thermal cameras. This one piece design gives the top plate a nice clean look, and is made from King Starboard. Specifications: Type: Adapters Box Dimensions: 5"H x 13"W x 17"L WT: 3 lbs UPC: 015568089831 Quick Guide (pdf)

Read more less

LTB Top Standard 1"-14 Thread for GPS or Wind TransducerAdapter to mount a GPS unit or wind transducer. Uses standard 1"-14 threads. Specifications: Type: Light/GPS Brackets Box Dimensions: 5"H x 5"W x 5"L WT: 0.3 lbs UPC: 839662009522 Quick Guide (pdf)

Read more less

Modular Plate for Intellian/KVH/Glomex/Thrane & Thrane/Raymarine/Sea-King/Sea-Tel/VDOSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.Unique DesignNo longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics. Specifications: Construction: Aluminum Type: Adapters Box Dimensions: 4"H x 15"W x 15"L WT: 5 lbs UPC: 839662009133 Quick Guide (pdf)

Read more less

4 Degree Wedge for Open Array RadarsImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more!Simple and Easy InstallationPre-drilled to fit your specific radar, allowing for quick and easy hassle free installation. DurableMade from marine grade polymerCompatible Manufacturers:Raymarine Specifications: Type: Wedges Box Dimensions: 2"H x 13"W x 14"L WT: 2 lbs UPC: 839662002080 Quick Guide (pdf)

Read more less

Low Profile Satdome Adapter for KVH, Raymarine, and IntellianSeaview Low Profile Adapters are ideal for installations where space is limited due to their small mounting bases. All models feature a center channel that you can run all your satdome cables through. This allows for a nice clean installation. Specifications: Type: Adapters Box Dimensions: 4"H x 15"W x 16"L WT: 5.3 lbs UPC: 839662005081 Quick Guide (pdf)

Read more less

Modular Top Plate for Flir M or Ray T Series Thermal CamerasSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.King StarboardMade of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation.  Specifications: Type: Adapters Box Dimensions: 1"H x 11"W x 16"L WT: 3.5 lbs UPC: 839662009171 Quick Guide (pdf)

Read more less

5" Modular Mount Vertical 8" Round Base Plate - Top Plate RequiredThis Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. Specifications: Type: Vertical Mount Height: 8" Box Dimensions: 7"H x 9"W x 10"L WT: 5.2 lbs UPC: 839662009089 Quick Guide (pdf)

Read more less

Low Profile Adapter for Intellian, KVH, Raymarine and Sea-TelSeaview Low Profile Adapters are ideal for installations where space is limited due to their small mounting bases. All models feature a center channel that you can run all your satdome cables through. This allows for a nice clean installation.*Reinforced with an anodized aluminum insert. This provides superior strength and durability.  Specifications: Type: Adapters Box Dimensions: 4"H x 16"W x 16"L WT: 4.5 lbs UPC: 839662005876 Quick Guide (pdf)

Read more less

1-1/4" Light Bar for Open Array RadarSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance.Easy InstallationSecured with a stainless steel clamp, simply use the supplied four bolts.   Specifications: Type: Light/GPS Brackets Box Dimensions: 6"H x 11"W x 42"L WT: 5.05 lbs UPC: 839662009195 Quick Guide (pdf)

Read more less

PM5-FMT-8Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.Extra SecurityNo visible bolts on the camera mounting plate provides extra security and improved aesthetics.Small Base FotprintThis mount is the perfect solution for installations where space is limited. Specifications: Type: Vertical Mount Height: 5" Box Dimensions: 7"H x 10"W x 10"L WT: 4.4 lbs UPC: 839662009300 Quick Guide (pdf)

Read more less

4-Degree Wedge for Most Closed Dome Radars - 18"-24" - WhiteImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more!Features: Simple and Easy Installation Pre-drilled to fit your specific radar, allowing for quick and easy hassle-free installation.  Durable Made from marine-grade polymer Compatible Manufacturers: B & G Garmin Humminbird Koden Lowrance Raymarine Simrad Specifications: Type: Wedges Box Dimensions: 2"H x 13"W x 14"L WT: 4.45 lbs UPC: 839662002066 Quick Guide (pdf)

Read more less

12" Modular Mount AFT Raked 10" x 10" Base Plate for Large Sat Domes - 18" Top Plate RequiredThis Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. Specifications: Type: Aft Leaning Mount Height: 12" Box Dimensions: 13"H x 13"W x 17"L WT: 11.5 lbs UPC: 839662008976 Quick Guide (pdf)

Read more less

4 Degree Wedge for Open Array RadarsImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more!Simple and Easy InstallationPre-drilled to fit your specific radar, allowing for quick and easy hassle free installation. DurableMade from marine grade polymerCompatible Manufacturers: Furuno Garmin Koden Simrad Sitex Specifications: Type: Wedges Box Dimensions: 2"H x 13"W x 14"L WT: 2 lbs UPC: 839662002073 Quick Guide (pdf)

Read more less

10" Modular Mount FWD Raked 7" x 7" Base Plate - Top Plate RequiredThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost effective choice. Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Specifications: Type: Forward Leaning Mount Height: 10" Box Dimensions: 12"H x 13"W x 13"L WT: 7.2 lbs UPC: 839662008945 Quick Guide (pdf)

Read more less

22.5" Dual Mount for Up To 4.5' Open Array Radar - Top for Sat Domes - Top Plate Required Install your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management.Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.Eliminate InterferenceA Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation.UniversalThe lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.Modular Top PlateThe top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. *Top Plate Sold Separately* Specifications: Type: Dual Mount Height: 22.5" Box Dimensions: 20"H x 24"W x 51"L WT: 43.2 lbs UPC: 839662009041 Quick Guide (pdf)

Read more less

1-1/4" Light Bar for Closed Dome Radar - Requires LTB TopSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance. Many StylesThere are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.Extra Height ClearanceOn select Seaview light bar models some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction.Easy InstallationSecured with a stainless steel clamp, simply use the supplied four bolts   Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 13"W x 31"L WT: 3.5 lbs UPC: 839662009188 Quick Guide (pdf)

Read more less

10" Modular Mount AFT Raked 7" x 7" Base Plate - Top Plate RequiredThis Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost effective choice. Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Specifications: Type: Aft Leaning Mount Height: 10" Box Dimensions: 12"H x 12"W x 13"L WT: 7.2 lbs UPC: 839662008969 Quick Guide (pdf)

Read more less

Modular Dual MountThe 28" tall Seaview Dual Mount is pre-drilled for up to 4.5' Open Array Radar. The top is for Satellite domes. This Dual Mount is for Open Array Radars & Satdomes or Cameras. The oval hollow mast section allows for easy cable management. The small 10" x 10" foot print design is a great solution for limited space. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as spreaders, lightbars and floodlights.Please note that a Top Plate is required (sold separately) Specifications: Type: Dual Mount Box Dimensions: 20"H x 24"W x 43"L WT: 33.15 lbs UPC: 839662009058 Quick Guide (pdf)

Read more less

LTB Top Universal for Mounting Your Light/GPSThe LTB-U1A is a Universal Light Bar Top for mounting your own light and or GPS. Specifications: Type: Light/GPS Brackets Box Dimensions: 5"H x 8"W x 8"L WT: 1 lbs UPC: 839662009539 Quick Guide (pdf)

Read more less