APT-F-LB-01 PowerTower® Center Mounted Light Bar for Forward Leaning Radar MountsCentral light bar for all forward learning PowerTowers®Compatible with:Scanstrut forward leaning PowerTower® radar mountsFeatures: All mounting holes are predrilled for easy retrofit installation, attach using mounting bolts, no extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - 316 Stainless Steel Height - 25.4" (404mm) Mount Position - Center In the Box: Light bar Instruction manual *Sold as an Individual Specifications: Construction: Aluminum Type: Light/GPS Brackets Height: 25.4 Box Dimensions: 5"H x 10"W x 25"L WT: 3 lbs UPC: 5060114797628 Quick Guide (pdf)

Read more less

APT-150-01 - Aluminum PowerTower® Radar Mount - 6" Aft LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.There is a PowerTower® to fit pretty much every modern radar.Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual  Specifications: Type: Aft Leaning Mount Construction: Aluminum Height: 5.91 Box Dimensions: 7"H x 13"W x 13"L WT: 6 lbs UPC: 5060114795402 Quick Guide (pdf)Brochure (pdf)

Read more less

APT-150-01 - Aluminum PowerTower® Radar Mount - 6" Aft Leaning - BlackThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.There is a PowerTower® to fit pretty much every modern radar.Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual  Specifications: Construction: Aluminum Type: Aft Leaning Mount Height: 5.91 Box Dimensions: 5"H x 16"W x 21"L WT: 3.4 lbs UPC: 5060114797680 Quick Guide (pdf)

Read more less

StarPod 3 System for Starlink Gen3 Standard Dish *Starlink Dish Not IncludedStarPod Systems are designed to provide a strong, sturdy, and attractive mounting solution for Starlink on board large boats with a hardtop, radar arch, or other flat mounting surface. The waterproof housing incorporates a 10-degree polyethylene wedge that is CNC routed to fit the internal swivel tube and allows the dish to be rotated to optimize the view of Starlink satellites if necessary. The angle also facilitates rainwater runoff that can degrade a signal if water accumulates on a flat-mounted Starlink dish. The StarTower base is solidly built with 8 mm thick aluminum and powder coated with a high gloss white finish. The bottom base of the StarTower measures 7″ square.What are the benefits of mounting a Starlink dish in a StarPod?StarPod protects Starlink and completely encloses the Starlink antenna in a very sturdy and attractive waterproof housing. Our testing has proven that there is no degradation of the signal while inside the thermoformed acrylic-capped ABS housing.Mounting a Starlink dish inside a StarPod provides additional protection from water intrusion, just as all NavPods have done for other Marine Electronics for over 25 years.How do I mount a Starlink dish inside a StarPod?The kickstand base that comes with a Starlink Gen3 Standard dish is not utilized when mounting inside a StarPod; only the dish itself is used. The initial Starlink setup process should be completed before mounting the dish inside a StarPod (refer to your Starlink setup/installation guide for this process). Once the initial Starlink setup process is complete, the dish can be mounted inside the StarPod housing (using the instructions and hardware included with the StarPod).Features: Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening, and the more uniform the pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. StarPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The gasket will continue to do its job. Nickel Chrome-Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for matching to the NavPod wrench for better holding ability when tightening. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style! Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods, including the StarPod. Specifications: Starlink Gen3 Standard dish; 23.04 x 15.07″ dish size Starlink Dish Not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Seaview Stainless Steel Guard for 12-20" Radar DomesProtect your radome from damage and reduce wear and tear on the sails with Seaview Mast Mount Guards. Manufactured from marine grade 316 stainless steel and finished with a high polish. No extra fastenings required, mounted using the radome bolts. Fits easily between the mast mount and radar antenna. Compatible Units: Furuno - 15" - 18" Radomes, DRS42 (1st Watch) Garmin - GMR18(HD), GMR18x(HD) Radomes  JRC - JUE 250, JUE 33 (14")  Koden - 18" (MDC 900 Series) Radomes  Lorenz - 12" - 24" Radomes  Lowrance - 3G, 4G Radomes  Raymarine - 18" Radomes, 33STV, 37STV, 45STV  Seiwa/Tech Marine - 12" - 24" Radomes  Simrad - 3G, 4G, HALO20  Sitex - 18" (T760/T921) Radomes Thrane & Thrane - FB150, FB250, Fleet33, Fleet33+  Specifications: Type: Radar Guards Box Dimensions: 4"H x 22"W x 22"L WT: 6.6 lbs UPC: 839662005753 Quick Guide (pdf)

Read more less

APT-250-02 - Aluminum PowerTower® Radar Mount - 10" Aft LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.There is a PowerTower® to fit pretty much every modern radar.Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D/DRSD4D-NXT, DRS4W, NavNet (18" and 24") radars Humminbird - AS 21 RD4KW radar Intellian - i1 radars Interphase - Mini RE-1, RE-8 radars JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000, JMA 2343 / 5104 (Radome: NKE-2042) radars Koden - 2kW 12" radar KVH - TracVision M1 and TV1 radars Lowrance - 3G/4G, LRA-1800, RB714A, DX42, LRA-2400 HD radars Majestic - SATMAR32 radar Navman - 8000 Series (8084 and 8120) 18" radars Nobletec - 2kW - 20" radars Northstar - M Series 18" and 24"  8000i radars Raymarine - 33STV radars Seiwa - SWR-1, 8, 9 radars Simrad - 3G/4G, GB40, NX40/45, NSE8/12, RB712A, DX42S, DX64S radars Sitex - MDS-1, 8, 12, NKE-1066 radars Techmarine - T-72.01, 72.02, 72.04 Radars Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium A range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 9.84" (250mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual Specifications: Construction: Aluminum Height: 9.84 Type: Aft Leaning Mount Box Dimensions: 8"H x 9"W x 15"L WT: 5 lbs UPC: 5060114797734 Quick Guide (pdf)

Read more less

5" Vertical Modular Mount w/8" Round Base Plate - Top Plate RequiredThis Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. Specifications: Type: Vertical Mount Height: 5" Box Dimensions: 7"H x 9"W x 10"L WT: 5.2 lbs UPC: 839662009089 Quick Guide (pdf)

Read more less

5.5" Thermal Camera Mount Aft Leaning for M100 & M200 SeriesGet the most out of your FLIR M100 and M200 Series Thermal Camera with Seaview's Aft-Leaning Camera Mount. Measuring 5.5" tall, the Seaview Aft-Leaning Camera Mount provides flexibility in any installation, especially when saving space is a top priority. Features: 5.5" Tall, Aft-Leaning Mount compatible with FLIR M100 and M200 Series Thermal Cameras Elevates electronics for optimum performance and allows for flexibility in installation Hollow, oval heavy-duty mast section supports mounted electronics and allows for convenient cable/wiring management Pre-drilled, 7" x 7" base footprint allows for a simple and easy installation Compatible Units: FLIR M132 FLIR M232 Specifications: Orientation: Aft-leaning Material: Marine-grade aluminum Finish: Powder coated white Specifications: Type: Aft Leaning Mount Height: 5.5" Box Dimensions: 6"H x 9"W x 10"L WT: 2.5 lbs UPC: 015568084768

Read more less

5.25" AFT Leaning Mount for Searchlights & Thermal Cameras with 7" x 7" Base PlateSeaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″.Cable ManagementA hollow oval mast section provides plenty of room for cable management.Space-Saving DesignThe small 7"x 7" base footprint makes this a great solution to an installation where space is an issue.  Specifications: Type: Aft Leaning Mount Height: 5.25" Box Dimensions: 9"H x 9"W x 13"L WT: 5.3 lbs UPC: 839662009348

Read more less

Light Bar Top - WhiteWhite universal box top for all-round, masthead, and stern (lights not included).

Read more less

2 Degree Wedge for Power MountThe most common planing attitude requires 3° - 4° of adjustment. If you are unsure which to choose then we recommend the 4° wedge. We do however offer 2° & 6° wedges if you feel a little more a little less is better for your application.Features: Pre-drilled mounting holes allow for quick and easy installation Made from marine-grade polymer Specifications: Type: Wedges Box Dimensions: 2"H x 9"W x 10"L WT: 0.7 lbs UPC: 839662003377 Quick Guide (pdf)

Read more less

Starlink Performance Gen 3 Adapter Plate for Use with Seaview or Starlink Angled Wedge Base - WhiteThe Seaview ADASPG3AP adapter plate has been specifically designed to securely mount the Starlink Performance Gen 3 Antenna to the angled wedge base originally used for the Starlink Performance Gen 2 (formerly the Flat High Performance antenna).*Note this is the adapter plate only, the angled wedge base and Starlink antenna are not included.*This adapter plate has pre-drilled mounting holes and threaded inserts to easily adapt the new Starlink Performance Gen 3 to Starlink's grey angled wedge base or Seaview's angled wedge base (SVSLWB & SVSLWBBLK).

Read more less

APEX Surface Mount for Starlink Standard Gen 3 Antenna - BlackThe Seaview APEX APXG3DMV2 is a direct surface mount kit tailored for the Starlink Standard Gen 3 Antenna, specifically engineered for the demanding marine environment. Its suitability for marine conditions makes it perfect for any other outdoor use, such as on RVs, overland vehicles, vans, jeeps, UTVs, trucks, and more. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The two end caps are crafted from machined marine-grade high-density polyethylene, offering an exceptional finish and corrosion resistance. These end caps are secured to black hard-anodized aluminum strips, providing superior strength to firmly hold the Gen 3 antenna on any flat surface.The Starlink Standard Gen 3 antenna now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview APXG3DMV2 mount is a superior choice, offering a reliable and easily assembled mounting solution.The APXG3DMV2 also includes one of Seaview's CG2090W horizontal cable seals for waterproof cable entry. This seal can be placed either beneath the antenna or externally, depending on your needs. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 4"W x 26"L WT: 4.2 lbs UPC: 850047035981

Read more less

16.75" Dual Mount Pre-Drilled for Most Closed Dome Radars Top for FLIR Searchlight Satellite DomesInstall your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management. Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.Eliminate Interference  A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation. UniversalThe lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount. Modular Top PlateThe top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. Specifications: Type: Dual Mount Height: 16.75" Box Dimensions: 14"H x 18"W x 36"L WT: 26 lbs UPC: 727908835137 Quick Guide (pdf)

Read more less

4-Degree Wedge for Most Closed Dome Radars - 18"-24" - BlackImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more!Features: Simple and Easy Installation Pre-drilled to fit your specific radar, allowing for quick and easy hassle-free installation.  Durable Made from marine-grade polymer Compatible Manufacturers: B & G Garmin Humminbird Koden Lowrance Raymarine Simrad

Read more less

Universal Box Top for All-Around, Masthead and Stern LightsThis Light Bar Top is a universal box top for all-round, masthead & stern lights. Please note that lights are not included. Specifications: Type: Light/GPS Brackets Box Dimensions: 5"H x 8"W x 8"L WT: 1.2 lbs UPC: 839662009256 Quick Guide (pdf)

Read more less

PM5FM38 Thermal Camera Mount for FLIR M300 Series Vertical 8"Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.63" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation. Extra Security No visible bolts on the camera mounting plate provides extra security and improved aesthetics. Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Specifications: Type: Vertical Mount Height: 8" Box Dimensions: 7"H x 13"W x 13"L WT: 5.5 lbs UPC: 727908835519 Quick Guide (pdf)

Read more less

Top Plate for FLIR M100 & M200This Seaview top plate is for FLIR M100 or M200 thermal cameras. This one piece design gives the top plate a nice clean look, and is made from King Starboard. Specifications: Type: Adapters Box Dimensions: 5"H x 13"W x 17"L WT: 3 lbs UPC: 015568089831 Quick Guide (pdf)

Read more less

4 Degree Wedge for Power MountThe most common planing attitude requires 3° - 4° of adjustment. If you are unsure which to choose then we recommend the 4° wedge. We do however offer 2° & 6° wedges if you feel a little more a little less is better for your application.Features: Pre-drilled mounting holes allow for quick and easy installation Made from marine-grade polymer Specifications: Type: Wedges Box Dimensions: 2"H x 9"W x 10"L WT: 0.8 lbs UPC: 839662008907 Quick Guide (pdf)

Read more less

Triple Mount Adapter with C5 Certified LED Light 12" Post and Threaded 1"-14 Thread Bases for GPS UnitsLight bar top with an LED light on a 12" post and 2 threaded 1-14 bases for GPS units. Specifications: Height: 12" Type: Light/GPS Brackets Box Dimensions: 5"H x 13"W x 13"L WT: 4.6 lbs UPC: 850047035998

Read more less

18" Modular Mount Vertical 8" Round Base Plate - Top Plate RequiredThis Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.Modular Top PlateA Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.Modular DesignThe modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. Specifications: Type: Vertical Mount Height: 18" Box Dimensions: 13"H x 13"W x 20"L WT: 8.6 lbs UPC: 839662009102 Quick Guide (pdf)

Read more less

Starlink Performance Gen 3 Modular Top Plate for Mounts Ending in M1 & M2 - WhiteThe Seaview modular top plate ADASPG3 for the Starlink Performance Gen3 Antenna is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2 and is light bar compatible. The optional light bar for this would be the LTBR and sold separately.The plate is machined from marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a grommet in the center for water-resistant cable routing.

Read more less

APEX Surface Mount for Starlink Mini - BlackThe Seaview APEX APXMDM is the perfect direct surface mount kit designed specifically for the Starlink Mini Antenna, engineered to withstand the harshest marine environments. While it's tailored for marine use, its robust design makes it ideal for a variety of outdoor applications, including RVs, overland vehicles, vans, jeeps, UTVs, trucks, and more. The mount's design includes a slight angle to the Starlink antenna, promoting moisture runoff and ensuring optimal performance.The APXMDM features end caps made from machined marine-grade high-density polyethylene, renowned for its exceptional finish and corrosion resistance. These end caps are securely attached to black hard-anodized aluminum strips, providing the strength needed to firmly mount the Starlink Mini antenna on any flat surface, whether stationary or in motion.Enhanced Support for Mobile ApplicationsWhile the Starlink Mini Antenna comes with a pressure-fit kickstand suitable for flat, non-mobile surfaces, it requires additional support when mounted on a vehicle or other fast-moving vessel. The Seaview APXMDM mount offers a reliable and easily assembled solution, ensuring your antenna stays securely in place.Complete with Waterproof Cable SealIncluded with the APXMDM is Seaview's CG2090W horizontal cable seal, providing a waterproof entry point for your cables, essential for maintaining the integrity of your setup in any environment.Optional Removable Base KitFor added convenience, you can opt for the optional removable base kit (APXMDMRB) to easily remove the Starlink Mini antenna when needed.Choose the Seaview APEX APXMDM for a durable, reliable, and easy-to-install mount that ensures your Starlink Mini Antenna performs flawlessly in any condition.

Read more less

4 Degree Wedge for Open Array RadarsImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more!Simple and Easy InstallationPre-drilled to fit your specific radar, allowing for quick and easy hassle free installation. DurableMade from marine grade polymerCompatible Manufacturers: Furuno Garmin Koden Simrad Sitex Specifications: Type: Wedges Box Dimensions: 2"H x 13"W x 14"L WT: 2 lbs UPC: 839662002073 Quick Guide (pdf)

Read more less

Modular Plate for Most Closed Domes & Open Arrays - BlackSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics. Unique DesignNo longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.Note: This only applies to the ADA-R1, ADA-S1 & ADA-S2 Top PlatesKing StarboardThe ADA-R2, ADA-S3, ADA-S4 & ADA-F1 Top Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation. Specifications: Type: Adapters Box Dimensions: 3"H x 14"W x 14"L WT: 4.8 lbs UPC: 727908835441 Quick Guide (pdf)

Read more less

APT-250-01 - Aluminum PowerTower® Radar Mount - 10" Aft LeaningThe Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions. By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.There is a PowerTower® to fit pretty much every modern radar.Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12 radars Sitex - RADARpc - 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 9.84" (250mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual  Specifications: Construction: Aluminum Type: Aft Leaning Mount Height: 9.84 Box Dimensions: 11"H x 13"W x 13"L WT: 7.8 lbs UPC: 5060114795419 Quick Guide (pdf)Brochure (pdf)

Read more less

ADAF3 Modular Top Plate for FLIR M300 Series Thermal Cameras f/Mounts Ending in M1 or M2Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics. Unique DesignNo longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.Note: This only applies to the ADA-R1, ADA-S1 & ADA-S2 Top PlatesKing StarboardThe ADA-R2, ADA-S3, ADA-S4 & ADA-F1 Top Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation. Specifications: Type: Adapters Box Dimensions: 3"H x 13"W x 14"L WT: 3.4 lbs UPC: 727908835496 Quick Guide (pdf)

Read more less

Mast Mount for FLIR M300 Series Fits Mast with 2-5/8" or LargerAchieve an unobstructed view for your FLIR or Raymarine thermal camera by mounting it on your mast. Made from marine grade aluminum. We now Chem-Film (same process used by Boeing) each high grade aluminum part prior to our standard 3 part epoxy prime and powder coat to ensure the best possible finish and corrosion resistance.Heavy DutySix rivets per foot are used to hold the heavy duty mounting feet to the mast. Solid under-body construction not only greatly improves strength but also hides cables. Specifications: Type: Mast Mount Box Dimensions: 6"H x 12"W x 20"L WT: 7.95 lbs UPC: 727908835540 Quick Guide (pdf)

Read more less

Performance Gen 3 Starlink Antenna Mount with 8 Degree Wedge Base - BlackThe Seaview SRM300WB8 surface mount for the Starlink Performance Gen 3 Antenna has been specifically designed for the harsh marine environment. If it's good for the marine environment, then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-sides, UTVs, trucks, etc.).The SRM300WB8 kit includes a Starlink Performance Gen 3 adapter plate (ADASPG3AP) and an 8° wedge base (SVSLWB). The wedge base has pre-drilled mounting holes for easy hardware fastening and is drilled and tapped for the included CG30PW cable seal, ensuring a watertight and secure installation without the need to cut Starlink connectors.The aluminum wedge base has a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance.

Read more less

Removable Base for Pedestal Mounts with 7x7 Base Plate - WhiteThese innovative mounts save time, money, and headaches for many different types of boat owners. Designed with a self-draining waterproof base, these removable bases make removing/servicing/securing/installing high-value marine electronics easier than ever. Four captive knobs for easy and quick release without fear of losing a knob.Note: The black knobs are captive so they will not fall off.

Read more less

Universal 24" Radar Mast PlatformSeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.Incredible StrengthThe solid under body construction not only greatly improves strength but also hides radar cables. On certain models.AccessoriesPre-drilled under body allows for flood lights or horns to be mounted on certain models.Compatible Manufacturers: Furuno Garmin JRC Koden KVH Raymarine Simrad Sitex Specifications: Type: Mast Mount Box Dimensions: 7"H x 16"W x 21"L WT: 5.4 lbs UPC: 839662005227

Read more less

Direct Mount Adapter Plate for Simrad HALO™ Open Array RadarSeaview's Simrad HALO™ adapter plate is a great solution when replacing an existing Simrad Broadband 3G™, Broadband 4G™, Raymarine or Garmin closed dome radar. Mounting holes pick up existing radar brands mentioned above and the Simrad HALO™ open array. Specifications: Type: Adapters Box Dimensions: 3"H x 13"W x 13"L WT: 3.8 lbs UPC: 015568089770 Quick Guide (pdf)

Read more less

1200mm Deck Strut KitComplete 1200mm Deck Strut Kit - for SC100 Pole Mount Specifications: Construction: Stainless Steel Type: Misc Box Dimensions: 4"H x 5"W x 54"L WT: 4.45 lbs UPC: 5060114793217

Read more less

Modular Dual PowerTower Strut - Compact Domes OnlyThe Modular Dual PowerTower has been designed to allow your open array, radar, Satcom & camera to be mounted together in one single space-saving modular installation.Features: Dual Power Tower strut (Radome) (compact) Material: 6082 Aluminum Extrusion Coating: Polyester Powder Finish: Gloss White Application: Marine Specifications: Construction: Powder Coated Aluminum Type: Aft Leaning Mount Box Dimensions: 10"H x 14"W x 27"L WT: 9.2 lbs UPC: 5060114796331

Read more less

Dual PowerTower® Strut - RadomeThe Modular Dual PowerTower® has been designed to allow your radome radar, Satcom and camera to be mounted together in one single space-saving modular installation. Specifications: Material: 6082 Aluminum extrusion Coating: Polyester powder Finish: Gloss white Specifications: Construction: Aluminum Type: Dual Mount Box Dimensions: 12"H x 22"W x 28"L WT: 15.2 lbs UPC: 5060114796317

Read more less

Mast Mounts For 18" Garmin, KVH M3 & Raymarine 37STVCompatible Units: Garmin GMR18/GMR18HD/18Xhd/18HD+/Fantom18/GMR40 B&G / Lowrance /Simrad DX45/3G/4G / HALO20 / HALO20+ Intellian i3 KVH TracVision M2/M3 Raymarine 37STV /Quantum / Quantum 2 Sea Tel Coastal 14 Still the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation.Features Easy and quick to install with all fastenings supplied Attached to mast by four swivel feet matching the profile of any mast 12 point fixing using highest quality Monel rivets for a secure installation Nylon washers for all fastenings to protect paint finish Waterproof cable grommet included to seal cable entry into mast Materials Marine grade 6082 aluminum Polyester powder coated for a durable and gloss white finish Kit includes 1 x Mast Mount 4 x Swivel mounting feet 1 x Complete fastening pack Specifications: Construction: Powder Coated Aluminum Type: Mast Mount Box Dimensions: 5"H x 12"W x 20"L WT: 5.25 lbs UPC: 5060114790902 Quick Guide (pdf)

Read more less

5" Vertical Camera Mount for SionyxGet the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct the view of your camera. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation.Extra SecurityNo visible bolts on the camera mounting plate provide extra security and improved aesthetics.Small Base Foot PrintThis mount is the perfect solution for installations where space is limited. Specifications: Height: 5" Type: Vertical Mount Box Dimensions: 7"H x 10"W x 10"L WT: 2.25 lbs UPC: 850047035189

Read more less

Gen 3 Standard Starlink Antenna Mount Top Plate - Fits Mounts Ending in M1 & M2The Seaview modular top plate ADAG3 for the Gen 3 Standard Starlink Antenna (and sometimes the Gen 4/Standard) is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a waterproof grommet in the center for cable routing.The Gen 3 Standard Starlink Antenna (sometimes Gen 4/Standard) now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview ADAG3 modular top plate is a superior choice, offering a very secure and easily assembled mounting solution.

Read more less

12.5" Dual Mount for Most Radar Domes - Top for Sat Domes - Top Plate RequiredInstall your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management.Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.Eliminate InterferenceA Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation.UniversalThe lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.Modular Top PlateThe top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. *Top Plate Sold Separately* Specifications: Type: Dual Mount Height: 12.5" Box Dimensions: 14"H x 18"W x 36"L WT: 23 lbs UPC: 839662009027 Quick Guide (pdf)

Read more less

1-1/4" Light Bar for Closed Dome Radar - Requires LTB TopSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance. Many StylesThere are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.Extra Height ClearanceOn select Seaview light bar models some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction.Easy InstallationSecured with a stainless steel clamp, simply use the supplied four bolts   Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 13"W x 31"L WT: 3.5 lbs UPC: 839662009188 Quick Guide (pdf)

Read more less

Gen 3 Standard Starlink Antenna Mount with 8 Degree Wedge Base - WhiteThe Seaview SRM200WB8 Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) that has been specifically designed for the harsh marine environment. If its good for the marine environment then its ideal for any other outdoor application (RVs, overland vehicle, vans, jeeps, side by side, UTV, trucks, etc.). The base aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.The Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, for marine or vehicle mounting, it necessitates additional support. Opting for the Seaview SRM200WB8 mount is a superior choice, offering a reliable and adaptable mounting solution. Wedge Base Features: Designed to fit the Starlink Flat High-Performance Antenna and Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna.  Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base. No need to cut the Starlink connectors for installation. Available in white or black

Read more less

Performance Gen 3 Starlink Antenna Mount with 8 Degree Wedge Base - WhiteThe Seaview SRM300WB8 surface mount for the Starlink Performance Gen 3 Antenna has been specifically designed for the harsh marine environment. If it's good for the marine environment, then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-sides, UTVs, trucks, etc.).The SRM300WB8 kit includes a Starlink Performance Gen 3 adapter plate (ADASPG3AP) and an 8° wedge base (SVSLWB). The wedge base has pre-drilled mounting holes for easy hardware fastening and is drilled and tapped for the included CG30PW cable seal, ensuring a watertight and secure installation without the need to cut Starlink connectors.The aluminum wedge base has a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance.

Read more less

Starlink Mini Quick Release Base Mount Only for Multiple Location UseBase mount only for use with APXMINIQR for multiple mounting location applications.

Read more less

Starlink Mini Roof MountThe Seaview APXMRM Starlink Mini Roof Mount is the ultimate surface mount solution designed primarily for rugged vehicles, including jeeps, UTVs, trucks, and more, while also suiting a range of outdoor applications like marine vessels, RVs, and overland vehicles. Ensures optimal performance for the Starlink Mini Antenna, even in extreme conditions.Ultra-Compact Mounting FootprintOne of the smallest in its class — preserves valuable deck/space real estate where most competing mounts demand far more room.Features: Heavy-Duty Construction for Rugged Durability - Crafted from marine-grade aluminum or steel, specifically designed for the marine environment, the APXMRM features a 3-part polyurethane primer and powder coat to ensure the best possible finish and exceptional corrosion resistance. This robust construction securely holds the Starlink antenna, making it ideal for the toughest terrains and climates. Enhanced Stability with Versatile Mounting Options - Equipped with quick-release knobs or security bolts, the APXMRM ensures the Starlink Mini Antenna stays firmly in place, offering flexibility for both temporary and permanent installations on moving vehicles. Its low-profile design, standing only 2" tall, maintains an aerodynamic shape. Customizable Fit for Added Protection - The mount allows the antenna to be adjusted vertically, accommodating an optional protective panel as needed, enhancing safety and adaptability across various setups. Built for Extreme Conditions - Designed with durability and safety in mind, the APXMRM includes Seaview's CG20PB small round cable seal for a waterproof cable entry, safeguarding your setup in harsh environments. Choose the APXMRM for a heavy-duty, reliable, and customizable mount that ensures your Starlink Mini Antenna performs flawlessly in any rugged condition.

Read more less

Aluminum 8° Wedge Base for Starlink Flat High-Performance Antenna - WhiteThe Seaview Aluminium 8° Wedge Base for the Starlink Flat High-Performance antenna has been specifically designed for the marine environment (chem-treated with a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance). *This wedge base is a direct replacement for the gray wedge base that comes with the Starlink antenna.Features: Designed to fit the Starlink Flat High-Performance Antenna. Pre-drilled mounting holes allow the hardware to fasten directly to the wedge. Drilled and tapped for the cable seal that is already provided with the Starlink antenna.  No need to cut the Starlink connectors for installation. Pre-drilled with the Seaview modular top hole pattern for the option to fit on top of any Seaview modular mount. Specifications: Construction: Aluminum Type: Wedges Box Dimensions: 7"H x 15"W x 20"L WT: 4.05 lbs UPC: 850047035516

Read more less

Removable Base Kit for APXMDM Surface Mount for Starlink MiniThe optional removable base kit (APXMDMRB) can be used to easily remove the Starlink Mini antenna when needed. These are black anodized 3/8" thick aluminum strips. The removable base kit simply mounts to your desired mounting surface and is pre-drilled and tapped so that the surface mount APXMDM can mount directly on top. The removable base kit is a great option if you plan to use the Starlink Mini in more than one location.Choose the Seaview APEX APXMDM and APXMDMRB for a durable, reliable, and easy-to-remove mount that ensures your Starlink Mini Antenna performs flawlessly in any condition.

Read more less

18" Radar Mast PlatformSeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned with fore and aft adjustable rails so that you can have the radar as close as possible to the mast.Incredible StrengthThe solid under body construction not only greatly improves strength but also hides radar cables. On certain models.AccessoriesPre-drilled under body allows for flood lights or horns to be mounted on certain models.Compatible Manufacturers: B&G Garmin Humminbird Lowrance Raymarine SImrad Specifications: Type: Mast Mount Box Dimensions: 7"H x 13"W x 20"L WT: 8.25 lbs UPC: 839662006606 Quick Guide (pdf)

Read more less

7" x 7" Hinged Adapter*For 7"x7" base plate.*Fits 5" - 24" tall radar mounts. The Seaview Hinge adapter is the ideal solution for someone who needs extra height clearance when storing their boat. This allows the user to have their Seaview mount hinge backwards. Available for Seaview mounts with a base dimension of 7"x7", 8"x8" and 10-"x10".The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.No Tools NeededWith our captive knobs you do not need tools, and these will stay with the hinge when it's open or closed.Gain Height ClearanceSimple and easy solution to lower the height of your radar mount. The hinge adapter can hinge back 180°. Allowing you the most clearance possible. Specifications: Type: Misc Box Dimensions: 4"H x 11"W x 12"L WT: 5.3 lbs UPC: 839662002707 Quick Guide (pdf)

Read more less