Acrylic Adhesive - 10-PackCAN NOT SHIP AIR,UPS GROUND ONLYAT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without sagging. AT-2010 cures in 5 - 6 minutes, has a 4 minute working time and develops working strength in 15 -20 minutes. This makes AT-2010 the ideal adhesive for applications which require an immediate high strength bond. AT-2010 has a 6 month shelf life when stored at 72 degrees. We recommend that where ever possible this adhesive be refrigerated. Packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 - 200 parts.

Read more less

Boat Leveler to Bennett Actuator Conversion Kit - Hydraulic to HydraulicBennett Marine's V351CK conversion kit replaces Boat Leveler cylinders with Bennett though-hull fittings. Kit includes: 2 hydraulic cylinders and all hardware to convert your system 2 stainless steel conversion brackets 8 1/4-20 x 1/2 machine screws 4 1/4-20 x 3/4 wood screws 2 3" pipe nipples 2 female barb fittings 2 actuators WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)

Read more less

Reed Switch Fuel Sender - 230 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 9.2" (230mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 10"L WT: 0.6 lbs UPC: 754059064512

Read more less

ALAS I Adjustable Fuel Sender - 6 to 15-3/4" - 3-180 OhmFor a more economical and practical solution for fuel monitoring for tank depths, VDO ALAS I 12/24 V fuel senders are definitely on the level!  These fuel senders are engineered with a redundant dual-wiper system and a unique "quiet arm" (minimizes float movement). The slotted SAE 5-hole flange mount provides versatility for sender mounting options, and the stainless steel float arms and pivot adjust 140mm to 400mm.  So, for reliable performance you can count on--on the level--VDO ALAS I 12/24 V fuel senders deliver.Features:  Connection - .250" Spade Mounting Hardware - Included Low Fuel Warning Contact Voltage - 6-24V *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Box Dimensions: 3"H x 3"W x 19"L WT: 0.8 lbs UPC: 754059050669

Read more less

Reed Switch Fuel Sender - 180mm Most aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 7.2" (180mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 10"L WT: 0.5 lbs UPC: 754059064369

Read more less

Outlet Cover/Receptacle PlateHeight:5-1/16"Width:3-5/8"

Read more less

Power A MM12 - Electronic Control Package -Single Engine/Dual Station - Mechanical Throttle/Mechanical ShiftPower A Mark II™ Electronics Control Systems Private Protocol can bus for data transmission Connection of multiple stations up to 4 controls Modular System Direct communication w/electronic engines (SAE J 1939 or NMEA 2000) Plug'N Play connectivity Automatic engines synchronization Dock Assist Fully programmable shift delays MM12 Package Includes: 42009G - (2) PA2-B1 - Single Lever Control w/o Trim 42017F - (1) PA2-CU - Control Unit w/LED Diagnostc & Programming Screen 42027J - (2) PA2-MA - Electro Mechanical Actuatorf/Shift and/or Throttle 42028L - (1) PA2-NT - Network Terminator 42053K - (1) M-P3 - Main Power Supply Cable, 9.8' 71021K - (2) CAN-10 - Network Connection Cable 33' 73639T - (2) CAN-1 - Network Connection Cable 3' 42026G - (1) PA2-PU - Power Supply Unit f/12V Systems 42056S - (2) M-PE1 - Power Extension Cable 3.3' Quick Guide (pdf)Brochure (pdf)

Read more less

Power A EM22 - Electronic Control Package -Dual Engine/Dual Station - Electronic Throttle/Mechanical ShiftPower A Mark II™ Electronics Control Systems Private Protocol can bus for data transmission Connection of multiple stations up to 4 controls Modular System Direct communication w/electronic engines (SAE J 1939 or NMEA 2000) Plug'N Play connectivity Automatic engines synchronization Dock Assist Fully programmable shift delays EM22 Package Includes: 42011T - (2) PA2-B2 - Dual Lever Control w/o Trim 42017F - (1) PA2-CU - Control Unit w/LED Diagnostc & Programming Screen 42027J - (2) PA2-MA - Electro Mechanical Actuatorf/Shift and/or Throttle 42028L - (1) PA2-NT - Network Terminator 42053K - (1) M-P3 - Main Power Supply Cable, 9.8' 71021K - (2) CAN-10 - Network Connection Cable 33' 73639T - (3) CAN-1 - Network Connection Cable 3' 42026G - (1) PA2-PU - Power Supply Unit f/12V Systems 42056S - (3) M-PE1 - Power Extension Cable 3.3' 42018H - (1) PA2-VT - V-Throttle f/ 0-5V Interface 42060G - (2) M-S1 - Solenoid Shift Cable 3.3' Quick Guide (pdf)Brochure (pdf)

Read more less

Power A ME12 - Electronic Control Package -Single Engine/Dual Station - Mechanical Throttle/Electronic ShiftPower A Mark II™ Electronics Control Systems Private Protocol can bus for data transmission Connection of multiple stations up to 4 controls Modular System Direct communication w/electronic engines (SAE J 1939 or NMEA 2000) Plug'N Play connectivity Automatic engines synchronization Dock Assist Fully programmable shift delays ME12 Package Includes: 42009G - (2) PA2-B1 - Dual Lever Control w/o Trim 42017F - (1) PA2-CU - Control Unit w/LED Diagnostc & Programming Screen 42027J - (1) PA2-MA - Electro Mechanical Actuatorf/Shift and/or Throttle 42028L - (1) PA2-NT - Network Terminator 42053K - (1) M-P3 - Main Power Supply Cable, 9.8' 71021K - (2) CAN-10 - Network Connection Cable 33' 73639T - (2) CAN-1 - Network Connection Cable 3' 42026G - (1) PA2-PU - Power Supply Unit f/12V Systems 42056S - (2) M-PE1 - Power Extension Cable 3.3' 42023A - (1) PA2-SU - Electronic Shift Unit 42060G - (1) M-S1 - Solenoid Shift Cable 3.3' Quick Guide (pdf)Brochure (pdf)

Read more less

Power A MM12T - Electronic Control Package -Single Engine/Dual Station - Mechanical Throttle/Mechanical ShiftPower A Mark II™ Electronics Control Systems Private Protocol can bus for data transmission Connection of multiple stations up to 4 controls Modular System Direct communication w/electronic engines(SAE J 1939 or NMEA 2000) Plug'N Play connectivity Automatic engines synchronization Dock Assist Fully programmable shift delays MM12T Package Includes: 42010R - (2) PA2-B1T - Single Lever Control w/Trim 42017F - (1) PA2-CU - Control Unit w/LED Diagnostc & Programming Screen 42027J - (2) PA2-MA - Electro Mechanical Actuatorf/Shift and/or Throttle 42028L - (1) PA2-NT - Network Terminator 42053K - (1) M-P3 - Main Power Supply Cable 9.8' 71021K - (2) CAN-10 - Network Connection Cable 33' 73639T - (2) CAN-1 - Network Connection Cable 3' 42026G - (1) PA2-PU - Power Supply Unit f/12V Systems 42056S - (2) M-PE1 - Power Extension Cable 3.3' Quick Guide (pdf)Brochure (pdf)

Read more less

Power A ME21 - Electronic Control Package -Dual Engine/Single Station - Mechanical Throttle/Electronic ShiftPower A Mark II™ Electronics Control Systems Private Protocol can bus for data transmission Connection of multiple stations up to 4 controls Modular System Direct communication w/electronic engines (SAE J 1939 or NMEA 2000) Plug'N Play connectivity Automatic engines synchronization Dock Assist Fully programmable shift delays ME21 Package Includes: 42011T - (1) PA2-B2 - Dual Lever Control w/o Trim 42017F - (1) PA2-CU - Control Unit w/LED Diagnostc & Programming Screen 42027J - (2) PA2-MA - Electro Mechanical Actuatorf/Shift and/or Throttle 42028L - (1) PA2-NT - Network Terminator 42053K - (1) M-P3 - Main Power Supply Cable, 9.8' 71021K - (2) CAN-10 - Network Connection Cable 33' 73639T - (2) CAN-1 - Network Connection Cable 3' 42026G - (1) PA2-PU - Power Supply Unit f/12V Systems 42056S - (3) M-PE1 - Power Extension Cable 3.3' 42023A - (1) PA2-SU - Electronic Shift Unit 42060G - (2) M-S1 - Solenoid Shift Cable 3.3' Quick Guide (pdf)Brochure (pdf)

Read more less

Power A ME22 - Electronic Control Package -Dual Engine/Dual Station - Mechanical Throttle/Electronic ShiftPower A Mark II™ Electronics Control Systems Private Protocol can bus for data transmission Connection of multiple stations up to 4 controls Modular System Direct communication w/electronic engines (SAE J 1939 or NMEA 2000) Plug'N Play connectivity Automatic engines synchronization Dock Assist Fully programmable shift delays ME22 Package Includes: 42011T - (2) PA2-B2 - Dual Lever Control w/o Trim 42017F - (1) PA2-CU - Control Unit w/LED Diagnostc & Programming Screen 42027J - (2) PA2-MA - Electro Mechanical Actuatorf/Shift and/or Throttle 42028L - (1) PA2-NT - Network Terminator 42053K - (1) M-P3 - Main Power Supply Cable, 9.8' 71021K - (2) CAN-10 - Network Connection Cable 33' 73639T - (3) CAN-1 - Network Connection Cable 3' 42026G - (1) PA2-PU - Power Supply Unit f/12V Systems 42056S - (3) M-PE1 - Power Extension Cable 3.3' 42023A - (1) PA2-SU - Electronic Shift Unit 42060G - (2) M-S1 - Solenoid Shift Cable 3.3' Quick Guide (pdf)Brochure (pdf)

Read more less

Power A EM21 - Electronic Control Package -Dual Engine/Single Station - Electronic Throttle/Mechanical ShiftPower A Mark II™ Electronics Control Systems Private Protocol can bus for data transmission Connection of multiple stations up to 4 controls Modular System Direct communication w/electronic engines(SAE J 1939 or NMEA 2000) Plug'N Play connectivity Automatic engines synchronization Dock Assist Fully programmable shift delays EM21 Package Includes: 42011T - (1) PA2-B2 - Dual Lever Control w/o Trim 42017F - (1) PA2-CU - Control Unit w/LED Diagnostc & Programming Screen 42018H - (1) PA2-VT - V-Throttle f/0-5V Interface 42027J - (2) PA2-MA - Electro Mechanical Actuatorf/Shift and/or Throttle 42028L - (1) PA2-NT - Network Terminator 42029N - (2) T-VT2 - Universal V-Throttle Cable 6.5' 42053K - (1) M-P1 - Main Power Supply Cable, 9.8' 71021K - (2) CAN-10 - Network Connection Cable 33' 73639T - (2) CAN-1 - Network Connection Cable 3' 42026G - (1) PA2-PU - Power Supply Unit f/12V Systems 42056S - (2) M-PE1 - Power Extension Cable 3.3' Quick Guide (pdf)Brochure (pdf)

Read more less

Power A MM11 Electronic Control Package Single Engine/Single Station - Mechanical Throttle/Mechanical ShiftPower A Mark II™ Electronics Control Systems: Private Protocol can bus for data transmission Connection of multiple stations up to 4 controls Modular System Direct communication w/electronic engines (SAE J 1939 or NMEA 2000) Plug'N Play connectivity Automatic engines synchronization Dock Assist Fully programmable shift delays MM11 Package Includes: 42009G - (1) PA2-B1 - Single Lever Control w/o Trim 42017F - (1) PA2-CU - Control Unit w/LED Diagnostc & Programming Screen 42027J - (2) PA2-MA - Electro Mechanical Actuatorf/Shift and/or Throttle 42028L - (1) PA2-NT - Network Terminator 42053K - (1) M-P3 - Main Power Supply Cable, 9.8' 71021K - (1) CAN-10 - Network Connection Cable 33' 73639T - (2) CAN-1 - Network Connection Cable 3' 42026G - (1) PA2-PU - Power Supply Unit f/12V Systems 42056S - (2) M-PE1 - Power Extension Cable 3.3' Quick Guide (pdf)Brochure (pdf)

Read more less

Power A MM11T Electronic Control Package - Single Engine/Single Station - Mechanical Throttle/Mechanical Shift*Comes with TrimPower A Mark II™ Electronics Control Systems: Private Protocol can bus for data transmission Connection of multiple stations up to 4 controls Modular System Direct communication w/electronic engines(SAE J 1939 or NMEA 2000) Plug'N Play connectivity Automatic engines synchronization Dock Assist Fully programmable shift delays MM11T Package Includes: 42010R - (1) PA2-B1T - Single Lever Control w/Trim 42017F - (1) PA2-CU - Control Unit w/LED Diagnostc & Programming Screen 42027J - (2) PA2-MA - Electro Mechanical Actuatorf/Shift and/or Throttle 42028L - (1) PA2-NT - Network Terminator 42053K - (1) M-P3 - Main Power Supply Cable 9.8' 71021K - (1) CAN-10 - Network Connection Cable 33' 73639T - (2) CAN-1 - Network Connection Cable 3' 42026G - (1) PA2-PU - Power Supply Unit f/12V Systems 42056S - (2) M-PE1 - Power Extension Cable 3.3' Quick Guide (pdf)Brochure (pdf)

Read more less

Power A ME11 - Electronic Control Package -Single Engine/Single Station - Mechanical Throttle/Electronic ShiftPower A Mark II™ Electronics Control Systems Private Protocol can bus for data transmission Connection of multiple stations up to 4 controls Modular System Direct communication w/electronic engines (SAE J 1939 or NMEA 2000) Plug'N Play connectivity Automatic engines synchronization Dock Assist Fully programmable shift delays ME11 Package Includes: 42009G - (1) PA2-B1 - Single Lever Control w/o Trim 42017F - (1) PA2-CU - Control Unit w/LED Diagnostc & Programming Screen 42027J - (1) PA2-MA - Electro Mechanical Actuatorf/Shift and/or Throttle 42028L - (1) PA2-NT - Network Terminator 42053K - (1) M-P3 - Main Power Supply Cable, 9.8' 71021K - (1) CAN-10 - Network Connection Cable 33' 73639T - (2) CAN-1 - Network Connection Cable 3' 42026G - (1) PA2-PU - Power Supply Unit f/12V Systems 42056S - (2) M-PE1 - Power Extension Cable 3.3' 42023A - (1) PA2-SU - Electronic Shift Unit 42060G - (1) M-S1 - Solenoid Shift Cable 3.3' Quick Guide (pdf)Brochure (pdf)

Read more less

SmartGrip Tumbler Non-Tip - 24oz - WhiteOne system. Endless options. The Toadfish 24oz Mod-Lock Tumbler keeps your favorite drink ready for wherever the day takes you. Cryo-Core double-wall, vacuum-insulated stainless steel keeps drinks hot or cold for hours, from your morning commute to your last cast.The removable SmartGrip suction base grips smooth, flat surfaces to help resist tipping from accidental bumps and knocks. Set it down to engage, then lift straight up for a natural release. The Tri-Flow lid gives you three ways to drink: sip through the straw, drink directly, or rotate it closed when you’re on the move.The included Stash-Flask threads securely into the base for discreet, on-the-go storage, while the removable twist-lock handle gives you extra grip when you need it. Bring your music along by swapping SmartGrip for the compatible Mod-Lock wireless speaker. From the boat to the backyard, one versatile system keeps your favorite drink close and your options open.Features: 24oz capacity for all-day hydration Interchangeable Mod-Lock components make changing configurations quick and easy Removable SmartGrip suction base helps keep drinks upright on smooth surfaces Cryo-Core double-wall, vacuum-insulated stainless steel keeps drinks hot or cold for hours Tri-Flow lid with straw, open-flow, and closed drinking positions Removable twist-lock handle provides added grip and control Includes a removable Stash-Flask for discreet, on-the-go storage Includes Tri-Flow lid and reusable straw SmartGrip base can be swapped with a compatible Mod-Lock wireless speaker Optional wireless speaker sold separately What’s Included?The 24oz Mod-Lock Tumbler comes with a removable SmartGrip suction base, Stash-Flask, removable twist-lock handle, Tri-Flow lid, and reusable straw.

Read more less

Bow Thruster - 95 kgf - 12VThe Vetus 95 kgf is suitable for yachts and powerboats from 39 to 56 feet in length. Manufactured using the highest quality materials to give high power and long service life.Features: A single propeller creates less flow disturbance in the tunnel Unique propeller blade design minimizes cavitation noise Spiral gears minimize transmission noise Flexible coupling between tail piece and motor eliminates vibration Streamlined tail piece for optimal flow Strong synthetic propeller eliminates corrosion and reduces weight Easy to install, supplied with clear installation and operation instructions All Vetus maneuvering systems meet the EMC requirements This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

SmartGrip Tumbler Non-Tip - 24oz - NavyOne system. Endless options. The Toadfish 24oz Mod-Lock Tumbler keeps your favorite drink ready for wherever the day takes you. Cryo-Core double-wall, vacuum-insulated stainless steel keeps drinks hot or cold for hours, from your morning commute to your last cast.The removable SmartGrip suction base grips smooth, flat surfaces to help resist tipping from accidental bumps and knocks. Set it down to engage, then lift straight up for a natural release. The Tri-Flow lid gives you three ways to drink: sip through the straw, drink directly, or rotate it closed when you’re on the move.The included Stash-Flask threads securely into the base for discreet, on-the-go storage, while the removable twist-lock handle gives you extra grip when you need it. Bring your music along by swapping SmartGrip for the compatible Mod-Lock wireless speaker. From the boat to the backyard, one versatile system keeps your favorite drink close and your options open.Features: 24oz capacity for all-day hydration Interchangeable Mod-Lock components make changing configurations quick and easy Removable SmartGrip suction base helps keep drinks upright on smooth surfaces Cryo-Core double-wall, vacuum-insulated stainless steel keeps drinks hot or cold for hours Tri-Flow lid with straw, open-flow, and closed drinking positions Removable twist-lock handle provides added grip and control Includes a removable Stash-Flask for discreet, on-the-go storage Includes Tri-Flow lid and reusable straw SmartGrip base can be swapped with a compatible Mod-Lock wireless speaker Optional wireless speaker sold separately What’s Included?The 24oz Mod-Lock Tumbler comes with a removable SmartGrip suction base, Stash-Flask, removable twist-lock handle, Tri-Flow lid, and reusable straw.

Read more less

SmartGrip 4-in-1 Can Cooler - 12oz - BlueOne system. Endless options. The Toadfish Mod-Lock 4-in-1 Can Cooler fits standard 12 oz cans, slim cans, and bottles, then converts into an insulated tumbler with the included lid and straw. Cryo-Core double-wall, vacuum-insulated stainless steel keeps drinks ice-cold, from your first sip to your last cast.The removable SmartGrip suction base grips smooth, flat surfaces to help resist tipping from accidental bumps and knocks. Set it down to engage, then lift straight up for a natural release. The Tri-Flow lid gives you three ways to drink: sip through the straw, drink directly, or rotate it closed when you’re on the move.Bring your music along by swapping SmartGrip for the compatible Mod-Lock wireless speaker. From the boat to the backyard, one versatile system keeps your favorite drink close and your options open.Features: 4-IN-1 MOD-LOCK SYSTEM - Fits standard 12oz cans, slim cans, bottles, and converts into a tumbler. SMARTGRIP SUCTION - Removable suction puck creates a secure, spill-resistant hold on smooth surfaces. CRYO-CORE INSULATION - Double-wall, vacuum-insulated stainless steel helps keep drinks ice-cold. TRI-FLOW LID - Drink through the reusable straw, remove it for open flow, or rotate the lid to the closed position. LOCKING GASKET - Securely holds cans and bottles in place. MODULAR BASE - Swap the SmartGrip puck for a compatible wireless speaker, sold separately. What's Included: 4-in-1 can cooler Locking gasket Tumbler lid Reusable straw

Read more less

SmartGrip 10oz Tumbler - BlueOne system. Endless options. The Toadfish 10oz Mod-Lock Tumbler is your go-to for coffee, wine, and cocktails. Cryo-Core double-wall, vacuum-insulated stainless steel keeps your favorite drinks hot or cold, from morning coffee on the dock to an evening drink on the porch.The removable SmartGrip suction base grips smooth, flat surfaces to help resist tipping from accidental bumps and knocks. Set it down to engage, then lift straight up for a natural release. The Tri-Flow lid gives you three ways to drink: sip through a straw, drink directly, or rotate it closed when you’re on the move.Bring your music along by swapping SmartGrip for the compatible Mod-Lock wireless speaker. Compact and versatile, this 10oz tumbler keeps your favorite drink close, wherever the day takes you.Features: 10oz hybrid design is ideal for wine, cocktails, whiskey, coffee, and more Interchangeable Mod-Lock system lets you quickly change configurations SmartGrip suction technology provides a secure, non-tipping hold on smooth surfaces Cryo-Core insulation with double-wall, vacuum-insulated stainless steel Tri-Flow Lid with straw, open-flow, and lock and seal positions Includes a durable, reusable straw Removable SmartGrip base can be swapped with a compatible wireless speaker What's Included: 10oz Hybrid Wine Tumbler Removable SmartGrip suction base Tri-Flow lid Reusable straw Optional wireless speaker sold separately

Read more less

SmartGrip 4-in-1 Can Cooler - 12oz - TealOne system. Endless options. The Toadfish Mod-Lock 4-in-1 Can Cooler fits standard 12 oz cans, slim cans, and bottles, then converts into an insulated tumbler with the included lid and straw. Cryo-Core double-wall, vacuum-insulated stainless steel keeps drinks ice-cold, from your first sip to your last cast.The removable SmartGrip suction base grips smooth, flat surfaces to help resist tipping from accidental bumps and knocks. Set it down to engage, then lift straight up for a natural release. The Tri-Flow lid gives you three ways to drink: sip through the straw, drink directly, or rotate it closed when you’re on the move.Bring your music along by swapping SmartGrip for the compatible Mod-Lock wireless speaker. From the boat to the backyard, one versatile system keeps your favorite drink close and your options open.Features: 4-IN-1 MOD-LOCK SYSTEM - Fits standard 12oz cans, slim cans, bottles, and converts into a tumbler. SMARTGRIP SUCTION - Removable suction puck creates a secure, spill-resistant hold on smooth surfaces. CRYO-CORE INSULATION - Double-wall, vacuum-insulated stainless steel helps keep drinks ice-cold. TRI-FLOW LID - Drink through the reusable straw, remove it for open flow, or rotate the lid to the closed position. LOCKING GASKET - Securely holds cans and bottles in place. MODULAR BASE - Swap the SmartGrip puck for a compatible wireless speaker, sold separately. What's Included: 4-in-1 can cooler Locking gasket Tumbler lid Reusable straw

Read more less

SmartGrip 4-in-1 Can Cooler - 12oz - NavyOne system. Endless options. The Toadfish Mod-Lock 4-in-1 Can Cooler fits standard 12 oz cans, slim cans, and bottles, then converts into an insulated tumbler with the included lid and straw. Cryo-Core double-wall, vacuum-insulated stainless steel keeps drinks ice-cold, from your first sip to your last cast.The removable SmartGrip suction base grips smooth, flat surfaces to help resist tipping from accidental bumps and knocks. Set it down to engage, then lift straight up for a natural release. The Tri-Flow lid gives you three ways to drink: sip through the straw, drink directly, or rotate it closed when you’re on the move.Bring your music along by swapping SmartGrip for the compatible Mod-Lock wireless speaker. From the boat to the backyard, one versatile system keeps your favorite drink close and your options open.Features: 4-IN-1 MOD-LOCK SYSTEM - Fits standard 12oz cans, slim cans, bottles, and converts into a tumbler. SMARTGRIP SUCTION - Removable suction puck creates a secure, spill-resistant hold on smooth surfaces. CRYO-CORE INSULATION - Double-wall, vacuum-insulated stainless steel helps keep drinks ice-cold. TRI-FLOW LID - Drink through the reusable straw, remove it for open flow, or rotate the lid to the closed position. LOCKING GASKET - Securely holds cans and bottles in place. MODULAR BASE - Swap the SmartGrip puck for a compatible wireless speaker, sold separately. What's Included: 4-in-1 can cooler Locking gasket Tumbler lid Reusable straw

Read more less

Extra Cut Low Lint Prewashed Knitted Lambswool Pads 3-1/4" x 1/2" - No InterfaceLow Lint Prewashed Knitted Lambswool 1/2” Wool w/ No InterfaceThis pad works well on gelcoat to remove oxidation and can be used as a one-step pad due to the amazing finish it provides. For DA, this pad is ideally used for heavy compounding, bringing superior cutting abilities compared to a microfiber pad.Benefits: Unique Wool Material and 1/2″ Pile – Low Lint pads feature an amazing cut with an unmatched finish. Offering superior residue control and better performance while operating on any machine, along with reduced linting versus a traditional wool pad. Universal – Universal use and performance on all types of machines give the user increased flexibility. Center Ventilated Cooling Channel – Dissipates heat away from the center of the pad, reducing temperatures and increasing durability. The system also allows for perfect pad alignment. Features: Fits Backing Plate: 3" Aggression: Cutting Attachment Method: Hook & Loop Recommended Tools: Forced Dual Action, Random Orbital DA, Rotary

Read more less

SmartGrip 10oz Tumbler - WhiteOne system. Endless options. The Toadfish 10oz Mod-Lock Tumbler is your go-to for coffee, wine, and cocktails. Cryo-Core double-wall, vacuum-insulated stainless steel keeps your favorite drinks hot or cold, from morning coffee on the dock to an evening drink on the porch.The removable SmartGrip suction base grips smooth, flat surfaces to help resist tipping from accidental bumps and knocks. Set it down to engage, then lift straight up for a natural release. The Tri-Flow lid gives you three ways to drink: sip through a straw, drink directly, or rotate it closed when you’re on the move.Bring your music along by swapping SmartGrip for the compatible Mod-Lock wireless speaker. Compact and versatile, this 10oz tumbler keeps your favorite drink close, wherever the day takes you.Features: 10oz hybrid design is ideal for wine, cocktails, whiskey, coffee, and more Interchangeable Mod-Lock system lets you quickly change configurations SmartGrip suction technology provides a secure, non-tipping hold on smooth surfaces Cryo-Core insulation with double-wall, vacuum-insulated stainless steel Tri-Flow Lid with straw, open-flow, and lock and seal positions Includes a durable, reusable straw Removable SmartGrip base can be swapped with a compatible wireless speaker What's Included: 10oz Hybrid Wine Tumbler Removable SmartGrip suction base Tri-Flow lid Reusable straw Optional wireless speaker sold separately

Read more less

Trolling Motor Adapter Plate for Spy Pole™ MountThis adapter kit allows you to mount a Spy Pole mount to select non-Garmin trolling motors.In The Box: Trolling motor adapter plate for Spy Pole mount Split collar Dogbone stabilizer Hardware Documentation

Read more less

SmartGrip 4-in-1 Can Cooler - 12oz - GreyOne system. Endless options. The Toadfish Mod-Lock 4-in-1 Can Cooler fits standard 12 oz cans, slim cans, and bottles, then converts into an insulated tumbler with the included lid and straw. Cryo-Core double-wall, vacuum-insulated stainless steel keeps drinks ice-cold, from your first sip to your last cast.The removable SmartGrip suction base grips smooth, flat surfaces to help resist tipping from accidental bumps and knocks. Set it down to engage, then lift straight up for a natural release. The Tri-Flow lid gives you three ways to drink: sip through the straw, drink directly, or rotate it closed when you’re on the move.Bring your music along by swapping SmartGrip for the compatible Mod-Lock wireless speaker. From the boat to the backyard, one versatile system keeps your favorite drink close and your options open.Features: 4-IN-1 MOD-LOCK SYSTEM - Fits standard 12oz cans, slim cans, bottles, and converts into a tumbler. SMARTGRIP SUCTION - Removable suction puck creates a secure, spill-resistant hold on smooth surfaces. CRYO-CORE INSULATION - Double-wall, vacuum-insulated stainless steel helps keep drinks ice-cold. TRI-FLOW LID - Drink through the reusable straw, remove it for open flow, or rotate the lid to the closed position. LOCKING GASKET - Securely holds cans and bottles in place. MODULAR BASE - Swap the SmartGrip puck for a compatible wireless speaker, sold separately. What's Included: 4-in-1 can cooler Locking gasket Tumbler lid Reusable straw

Read more less

SmartGrip 4-in-1 Can Cooler - 12oz - WhiteOne system. Endless options. The Toadfish Mod-Lock 4-in-1 Can Cooler fits standard 12 oz cans, slim cans, and bottles, then converts into an insulated tumbler with the included lid and straw. Cryo-Core double-wall, vacuum-insulated stainless steel keeps drinks ice-cold, from your first sip to your last cast.The removable SmartGrip suction base grips smooth, flat surfaces to help resist tipping from accidental bumps and knocks. Set it down to engage, then lift straight up for a natural release. The Tri-Flow lid gives you three ways to drink: sip through the straw, drink directly, or rotate it closed when you’re on the move.Bring your music along by swapping SmartGrip for the compatible Mod-Lock wireless speaker. From the boat to the backyard, one versatile system keeps your favorite drink close and your options open.Features: 4-IN-1 MOD-LOCK SYSTEM - Fits standard 12oz cans, slim cans, bottles, and converts into a tumbler. SMARTGRIP SUCTION - Removable suction puck creates a secure, spill-resistant hold on smooth surfaces. CRYO-CORE INSULATION - Double-wall, vacuum-insulated stainless steel helps keep drinks ice-cold. TRI-FLOW LID - Drink through the reusable straw, remove it for open flow, or rotate the lid to the closed position. LOCKING GASKET - Securely holds cans and bottles in place. MODULAR BASE - Swap the SmartGrip puck for a compatible wireless speaker, sold separately. What's Included: 4-in-1 can cooler Locking gasket Tumbler lid Reusable straw

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 10.43"-11" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Inner Diameter (inch): 10" Hose Outer Diameter (inch): 10.43" TO 11" Specifications: Type: Fittings & Hoses Box Dimensions: 1"H x 11"W x 11"L WT: 0.4 lbs UPC: 704917010625

Read more less

SmartGrip Tumbler Non-Tip - 24oz - BlueOne system. Endless options. The Toadfish 24oz Mod-Lock Tumbler keeps your favorite drink ready for wherever the day takes you. Cryo-Core double-wall, vacuum-insulated stainless steel keeps drinks hot or cold for hours, from your morning commute to your last cast.The removable SmartGrip suction base grips smooth, flat surfaces to help resist tipping from accidental bumps and knocks. Set it down to engage, then lift straight up for a natural release. The Tri-Flow lid gives you three ways to drink: sip through the straw, drink directly, or rotate it closed when you’re on the move.The included Stash-Flask threads securely into the base for discreet, on-the-go storage, while the removable twist-lock handle gives you extra grip when you need it. Bring your music along by swapping SmartGrip for the compatible Mod-Lock wireless speaker. From the boat to the backyard, one versatile system keeps your favorite drink close and your options open.Features: 24oz capacity for all-day hydration Interchangeable Mod-Lock components make changing configurations quick and easy Removable SmartGrip suction base helps keep drinks upright on smooth surfaces Cryo-Core double-wall, vacuum-insulated stainless steel keeps drinks hot or cold for hours Tri-Flow lid with straw, open-flow, and closed drinking positions Removable twist-lock handle provides added grip and control Includes a removable Stash-Flask for discreet, on-the-go storage Includes Tri-Flow lid and reusable straw SmartGrip base can be swapped with a compatible Mod-Lock wireless speaker Optional wireless speaker sold separately What’s Included?The 24oz Mod-Lock Tumbler comes with a removable SmartGrip suction base, Stash-Flask, removable twist-lock handle, Tri-Flow lid, and reusable straw.

Read more less

VX300 Cold Machine Flat Roll-Bond Evaporator Plate for Volumes Up to 300LDesigned for flexibility and performance, the Dometic VX series evaporators bring precise, even cooling to any custom box configuration. Available in flat, O-box, and fan-cooled formats, each plate integrates cleanly into your design and connects easily to CX condensing units for a perfectly balanced refrigeration system.Features: High-capacity roll-bond plate for refrigeration systems up to 300 L Extended plate size (53.9" × 12" × 0.6" mm) maximizes cooling surface Bendable plate in L or U shape for optimal surface distribution in cooling compartment Ideal for large galleys and extended cruising requirements 2.2m refrigerant pipe length allows flexible compressor positioning Precision digital control compatibility with NTC temperature sensor for stable onboard cooling performance Owner's Manual (pdf)Brochure (pdf)

Read more less

6″ Extreme Gen 3 Action Series Jack Plate- Powder Coated Gloss BlackExtreme Gen 3 series supports motors up to a 15″ mounting width. If using a wider motor such as the Yamaha XTO, a set of 1″ spacers will be required for clearance.Bob’s has re-engineered their world-famous jack plate for 550+hp engines, including V10s.The Extreme Gen 3 Action has the all-in-one style pump, built into the jack plate so no hoses or pump need to be mounted inside the boat. This makes rigging the boat extremely easy!The Extreme Gen 3 Action series jack plates are available in 4, 6, 8, 10 & 12″  setbacks to suit every application.Jack plates are no longer just for fishing boats; offshore boaters will enjoy the extra speed and increased fuel economy from BMS’s line. Jack plates are used to improve an outboard boat's speed, hole shot, fuel efficiency, and the boater's ability to navigate in shallow waters. Includes:  Jack plate Wiring harness, Relays, Rocker-style switch Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

SmartGrip Tumbler Non-Tip - 24oz - TealOne system. Endless options. The Toadfish 24oz Mod-Lock Tumbler keeps your favorite drink ready for wherever the day takes you. Cryo-Core double-wall, vacuum-insulated stainless steel keeps drinks hot or cold for hours, from your morning commute to your last cast.The removable SmartGrip suction base grips smooth, flat surfaces to help resist tipping from accidental bumps and knocks. Set it down to engage, then lift straight up for a natural release. The Tri-Flow lid gives you three ways to drink: sip through the straw, drink directly, or rotate it closed when you’re on the move.The included Stash-Flask threads securely into the base for discreet, on-the-go storage, while the removable twist-lock handle gives you extra grip when you need it. Bring your music along by swapping SmartGrip for the compatible Mod-Lock wireless speaker. From the boat to the backyard, one versatile system keeps your favorite drink close and your options open.Features: 24oz capacity for all-day hydration Interchangeable Mod-Lock components make changing configurations quick and easy Removable SmartGrip suction base helps keep drinks upright on smooth surfaces Cryo-Core double-wall, vacuum-insulated stainless steel keeps drinks hot or cold for hours Tri-Flow lid with straw, open-flow, and closed drinking positions Removable twist-lock handle provides added grip and control Includes a removable Stash-Flask for discreet, on-the-go storage Includes Tri-Flow lid and reusable straw SmartGrip base can be swapped with a compatible Mod-Lock wireless speaker Optional wireless speaker sold separately What’s Included?The 24oz Mod-Lock Tumbler comes with a removable SmartGrip suction base, Stash-Flask, removable twist-lock handle, Tri-Flow lid, and reusable straw.

Read more less

100A Inlet - 125/250VSpring loaded cover provides an IP67 watertight rating when tightened.Features: 100A 125/250V shore power inlet Most frequently mounted in the boat's cabin side or cockpit coaming Gray inlet has a gasketed, spring-loaded cover providing an IP67 watertight rating (withstands temporary immersion) when tightened WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 100a Type: Inlets Voltage: 125/250v Box Dimensions: 6"H x 7"W x 8"L WT: 2.75 lbs UPC: 093344500107

Read more less

SmartGrip 10oz Tumbler - TealOne system. Endless options. The Toadfish 10oz Mod-Lock Tumbler is your go-to for coffee, wine, and cocktails. Cryo-Core double-wall, vacuum-insulated stainless steel keeps your favorite drinks hot or cold, from morning coffee on the dock to an evening drink on the porch.The removable SmartGrip suction base grips smooth, flat surfaces to help resist tipping from accidental bumps and knocks. Set it down to engage, then lift straight up for a natural release. The Tri-Flow lid gives you three ways to drink: sip through a straw, drink directly, or rotate it closed when you’re on the move.Bring your music along by swapping SmartGrip for the compatible Mod-Lock wireless speaker. Compact and versatile, this 10oz tumbler keeps your favorite drink close, wherever the day takes you.Features: 10oz hybrid design is ideal for wine, cocktails, whiskey, coffee, and more Interchangeable Mod-Lock system lets you quickly change configurations SmartGrip suction technology provides a secure, non-tipping hold on smooth surfaces Cryo-Core insulation with double-wall, vacuum-insulated stainless steel Tri-Flow Lid with straw, open-flow, and lock and seal positions Includes a durable, reusable straw Removable SmartGrip base can be swapped with a compatible wireless speaker What's Included: 10oz Hybrid Wine Tumbler Removable SmartGrip suction base Tri-Flow lid Reusable straw Optional wireless speaker sold separately

Read more less

SmartGrip Tumbler Non-Tip - 24oz - GreyOne system. Endless options. The Toadfish 24oz Mod-Lock Tumbler keeps your favorite drink ready for wherever the day takes you. Cryo-Core double-wall, vacuum-insulated stainless steel keeps drinks hot or cold for hours, from your morning commute to your last cast.The removable SmartGrip suction base grips smooth, flat surfaces to help resist tipping from accidental bumps and knocks. Set it down to engage, then lift straight up for a natural release. The Tri-Flow lid gives you three ways to drink: sip through the straw, drink directly, or rotate it closed when you’re on the move.The included Stash-Flask threads securely into the base for discreet, on-the-go storage, while the removable twist-lock handle gives you extra grip when you need it. Bring your music along by swapping SmartGrip for the compatible Mod-Lock wireless speaker. From the boat to the backyard, one versatile system keeps your favorite drink close and your options open.Features: 24oz capacity for all-day hydration Interchangeable Mod-Lock components make changing configurations quick and easy Removable SmartGrip suction base helps keep drinks upright on smooth surfaces Cryo-Core double-wall, vacuum-insulated stainless steel keeps drinks hot or cold for hours Tri-Flow lid with straw, open-flow, and closed drinking positions Removable twist-lock handle provides added grip and control Includes a removable Stash-Flask for discreet, on-the-go storage Includes Tri-Flow lid and reusable straw SmartGrip base can be swapped with a compatible Mod-Lock wireless speaker Optional wireless speaker sold separately What’s Included? The 24oz Mod-Lock Tumbler comes with a removable SmartGrip suction base, Stash-Flask, removable twist-lock handle, Tri-Flow lid, and reusable straw.

Read more less

Universal Flush Mount Frame for NRX130 Compressor Refrigerators - BlackA universal flush mount installation frame for the Dometic™ NRX 130 fridges. For a secure fit and a luxury finish.Features: Securely fits your fridge in place A neat and smart frame for your fridge Two door mounting options: protruding or flush with the frame

Read more less

Protective Cover for CFX3 & CFX5 75DZ Electric CoolersThe Dometic™ CFX3 PC75 protective cover is designed to protect your CFX3 from damage on even the most rugged adventures. The CFX3 PC75 is made from durable thermoformed EVA foam and 1200D nylon to protect against dirt, dust, and scuff damage. Roam free from worry with a CFX3 PC75.Features: Custom-fit to CFX5 75DZ (also fits CFX3 75DZ) Built with EVA foam and 1200D nylon for rugged protection Cutout for built-in bottle opener and user interface Zippered front + side pockets keep cords and tools in reach Designed to prevent overheating for peak performance

Read more less

7 Blade Propeller for 220/285/230/310 kgf Bow ThrustersThis is the 7-bladed propeller for the BOW220/285 /310 bowthrusters. Working in close collaboration with the Maritime Research Institute Netherlands (MARIN), the world-famous hydrodynamic laboratory, VETUS has optimized the performance of its thrusters. This has been achieved by utilizing a unique propeller blade profile. As cavitation produces unwanted noise, this new blade design offers a major reduction in operating sound levels. Moreover, the application of this new propeller reduces the current consumption by up to 10%.

Read more less

Yellow Twisted Acrylic & Wool Pad 8" x 1.5" Quick DisconnectFeatures: Wool for Compounding and Polishing – 8” x 1.5” Yellow Wool is constructed of 40% Twisted Wool/60% Twisted Acrylic for Polishing & Defect Refinement Ergonomically designed quick-release adapter allows for easy-on, easy-off attachment and disengagement to save time Secured Fit For A Perfectly Centered Pad Every Time with Adapter (88-1001) Specifications: Type: Buffers & pads Box Dimensions: 2"H x 10"W x 12"L WT: 0.75 lbs UPC: 810161191482

Read more less

Purple Foamed Wool Buffing/Polishing Pad with Center Hole 7.5" x 1"The purple foamed wool is a staple in the detail, OEM, and industrial markets alike. The proprietary foaming process helps hold the fibers together, creating a cushioned feel, holding abrasives to the surface, and adding an increased gloss and finishing ability. The patented nanofoam process encapsulates fibers at the base of the lambswool with microscopic polyfoam particles. Easily remove and level P1500 grit scratches, but still leave the finish of a foam pad, reducing holograms or compounding swirls. Specifications: Type: Buffers & pads Box Dimensions: 1"H x 11"W x 13"L WT: 0.15 lbs UPC: 810161192304 Quick Guide (pdf)

Read more less

Low Lint Knitted Lambswool 5.25" x 7/8"Premium low lint pads are a knitted prewashed lambswool paired with a foam interface for maximum comfort, performance, and overall user feel/experience. Significant testing went into the design to determine the best weight & wool pile height to maximize this pad for peak performance on any type of machine.Features: Low Lint Prewashed Knitted Lambswool  1/2” Wool  3/8” Foam with Interface Specifications: Type: Buffers & pads Box Dimensions: 1"H x 7"W x 9"L WT: 0.1 lbs UPC: 850002936834

Read more less

Blue Hybrid Wool with Center Hole 6.25" x 1"With the same great technology of our purple foamed wool pad, the blue foamed wool has a higher foam content for increased firmness and an even better finish. Offered in a 1” pile, this pad was originally designed as a cutting pad for gear-driven and forced rotation polishers. The foamed wool fibers resist or reduce caking and matting down. Specifications: Type: Buffers & pads Box Dimensions: 1"H x 7"W x 7"L WT: 0.1 lbs UPC: 850002936650 Quick Guide (pdf)

Read more less

Low Lint Knitted Lambswool 3.25" x 7/8"Premium low lint pads are a knitted prewashed lambswool paired with a foam interface for maximum comfort, performance, and overall user feel/experience. Significant testing went into the design to determine the best weight & wool pile height to maximize this pad for peak performance on any type of machine.Features: Low Lint Prewashed Knitted Lambswool  1/2” Wool  3/8” Foam with Interface Specifications: Type: Buffers & pads Box Dimensions: 1"H x 8"W x 8"L WT: 0.05 lbs UPC: 850026933529

Read more less

GripTide™ Non-Skid Deck Coating Kit - Gull GrayGripTide™ is a two-component high quality urethane, grip-enhancing, textured coating that provides a durable, protective finish for boat floors, boat decks and other marine surfaces.Features: 2K technology for durability and a quick cure Easy one-step spray or roller application Durable coating that maintains flexibility Adhesion to most surfaces Five popular marine colors Chemical resistant Fade resistant Applications: Fiberglass & SMC Gelcoat Fully cured unfinished & unsealed concrete Dry wood / engineered wood Primed or painted surfaces Properties: Coverage: 75 sq. ft. per gallon Kit contains 1 Gallon GripTide Non-Skid Deck Coating, 1 Cone Quart GripTide Catalyst, and 1 (9") GripTide Deck Coating Roller Quick Guide (pdf)Brochure (pdf)

Read more less

Starlink Maritime Top Plate for Seaview M1 & M2 Style Modular MountsSeaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.Features: Starlink Wedge Base hole pattern pre-dimpled in this modular top plate Water-tight gasket in the center of the plate to pass the Starlink cable The 1” thick starboard plate can accommodate a Seaview light bar Quick Guide (pdf)

Read more less

1.5" Riser Kit for Sea Swivel Standard MountPrecision-cut CNC-machined 1.5-in starboard riser for the Sea Swivel Trolling Motor Standard Mount to clear toe kicks, nav lights, cleats, etc... Includes:(1) White 1.5" Riser Kit 8"x8" with 4x5" mounting bolts & 6" main boltThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Low Lint Knitted Lambswool 6" x 7/8"Premium low lint pads are a knitted prewashed lambswool paired with a foam interface for maximum comfort, performance, and overall user feel/experience. Significant testing went into the design to determine the best weight & wool pile height to maximize this pad for peak performance on any type of machine.Features: Low Lint Prewashed Knitted Lambswool  1/2” Wool  3/8” Foam with Interface Specifications: Type: Buffers & pads Box Dimensions: 1"H x 8"W x 10"L WT: 0.1 lbs UPC: 850002936841

Read more less