18" Straight Trolling Motor Plate for Minn Kota Quest - BlackThe Sea Brackets 18-inch Straight Trolling Motor Mounting Plate, designed for the Minn Kota’s RTA-55 or RTA-83 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Specifications: Size: 18” x 10” x 1/2”Recommended Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Minn Kota’s RTA-55/RTA-83 or MKA-56 Quick Release Bracket Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 3/8–16 flat-head Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.For a reliable, sturdy, and corrosion-resistant mounting solution for the trolling motor, choose the Sea Brackets 18-inch Straight Trolling Motor Mounting Plate designed for all RTA-55/RTA-83 and MKA-56 Quest series trolling motors.

Read more less

XL Trolling Motor MountThe Sea Swivel XL trolling motor mount is designed for trolling motors 100" and greater and has a larger surface area (10" X 10") and backing plate (10" X 10") than the standard model. The larger size distributes the load to a larger surface area of the fiberglass.The patented Sea Swivel is a rotating trolling motor mount designed to pivot a trolling motor to the correct position while deployed. Also, it has the benefit of adjusting the stowed position to match the angle of every boat! The ultimate trolling motor mount!A quick-release bracket is necessary for installation with a trolling motor. Comes pre-drilled for the quick-release brackets for the following: Minn Kota - Ulterra, Terrova Quick-release bracket models RTA 54/62 (fits all 36V permanent magnet motors) Minn Kota Quest - Instinct Quest, Terrova Quest, Ulterra Quest Quick-release bracket RTA 55/56 (fits all new Brushless/Quest motors) Minn Kota RTA17 (fits all 24v motors for smaller units) Garmin Kraken 24v/36v 48" to 110" Rhodan Marine large mount 6 bolt 36v 84"/96"/108/120" Rhodan Gen 5 motors up to 120" Rhodan Marine smaller mount 4 bolt 24v Power Pole Move PV 36V/24V  Power Pole Move PV offshore This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

20" Straight Trolling Motor Plate for Garmin Kraken - BlackThe Sea Brackets 20" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Specifications:Dimensions: 20" x 8" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Mini Audible AlarmThe Siren Marine mini audible alarm produces a powerful sweeping siren sound. The alarm can be connected to one of the outputs on the Main Device, which will allow it to be turned on and off from the "switching" section of the Siren Connected Boat App. It can also sync to specific inputs in the Siren Connected Boat App.Specifications: Resonant Frequency (KHz): 2.5 4.5 Operating Voltage (Vdc): 5 15 Rated Voltage (Vdc): 12 Current Consumption (mA/max.): 150 at Rated Voltage Sound Pressure Level (dB/min.): 105 at 100cm at Rated Voltage Tone/Pulse Rate (Hz): Sweep Operating Temperature (°C): -20 +70 Storage Temperature (°C): -30 +80 Housing: ABS 777D plastic resin (Color: Black) Leading Wire: 24 AWG Weight (Gram): 26.2

Read more less

10' High-Pressure Supply Hose with 3/8" Female Swivel Flare Fitting on Each EndEasy to install and won't corrode or develop stress/fatigue cracks. This UL-listed hose is fully assembled and leak tested with solid brass fittings (3/8" female swivel flare each end), and high-pressure LPG hose. Quick Guide (pdf)

Read more less

Dealer Service KitExclusively offered to stocking dealers and repair yards, Bennett’s Dealer Service Kit is an affordable way to acquire the most common Bennett trim tab system replacement parts.What's Included? (QTY / 1) BOLTBLTADJ – BOLT Electric System (Not Including Tabs) (QTY / 1) BRC4000 – Rocker Switch for Electric Systems (QTY / 1) ES2000 – Rocker Switch for Hydraulic Systems (QTY / 2) A1101CPEIC – Hydraulic Actuator with Sensor (QTY / 2) A1200SCPEIC – Short Hydraulic Actuator with Sensor (QTY / 1) V351HPU1D – Hydraulic Power Unit 12V w/Deutsch Connector (QTY / 1) H1170A Hardware Kit A (QTY / 1) H1170B Hardware Kit B (QTY / 2) T112520 20′ Hydraulic Tubing (QTY / 2) H1179 Mounting Bracket for HPU (QTY / 2) A1114 Lower Hinge with Hinge Pin (QTY / 1) VP1135G Solenoid Valve (G) (QTY / 1) VP1135R Solenoid Valve (R) (QTY / 2) T1127 Nut with Ferrule WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Large Offset Trolling Motor Plate for Minn Kota Quest - BlackThe Sea Brackets Large Offset Trolling Motor Mounting Plate, designed for Minn Kota’s RTA-55 or RTA-83 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Minn Kota’s RTA-55/RTA-83 Quick Release Bracket Backing disk from Sea Brackets or an alternative backing support system 1/4–20 tapered Phillips machine screws, fender washers, and lock nuts 3/8–16 Flathead Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Random Orbital Polisher Bigfoot LHR15 Mark V (Tool Only)The RUPES BigFoot LHR15 Mark V polisher represents a real breakthrough in the professional polishing industry. This polisher features a 125 mm backing pad and a 15 mm orbit and stands out for a series of technical innovations aimed at improving performance and comfort, offering more precise and efficient polishing.Reduced vibration & silence with POLYSYNTHEC™ gearsA key innovation of the Mark V is the use of POLYSYNTHEC™ composite gears, which offer superior resistance to wear even in the most demanding working conditions. These gears are lighter than traditional metal gears and require less lubrication, thus improving the efficiency of the motor and reducing energy loss. The result is a drastic reduction in vibration and noise, improving comfort during prolonged use. The reduction in vibration is particularly important because it allows the operator to maintain a more stable grip, improving the precision of movements and the quality of the polishing. This also reduces fatigue during long work sessions, ensuring consistent and professional results. The 47% reduction in noise compared to previous models, however, makes the work environment quieter and more pleasant, protecting the operator’s hearing.PrecisionPro backing pads & low center of gravity for optimal controlThe BigFoot Mark V polishers bring aboard PrecisionPro backing pads, designed to ensure optimal balance when using different pads. These pads feature a protective rubber edge, which ensures greater safety when polishing delicate surfaces, reducing the risk of accidental damage. This allows the operator to work with greater confidence, even on sensitive surfaces such as edges or particularly delicate bodywork parts. Another notable innovation is the low centre of gravity of the Mark V polishers. Lowered by 13 mm compared to previous models, this allows unparalleled stability and superior control of the tool, especially in complex work situations. With a lower center of gravity, the operator can maneuver the polisher with greater precision, even when working on complex surfaces or intricate details.5-Year WarrantyRUPES doesn’t just offer advanced technological innovations, they demonstrate their confidence in the quality and durability of the Mark V polishers with an extended 5-year warranty. By registering their product immediately after purchase, customers can enjoy comprehensive support that covers any manufacturing defects, providing long-term protection for their investment. This extended warranty not only provides added peace of mind, it also underscores RUPES’ commitment to providing high-quality products that are designed to last.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Tools & Accessories Box Dimensions: 6"H x 7"W x 22"L WT: 8 lbs UPC: 8059519688218 Brochure (pdf)

Read more less

Semirigid Bigfoot Rotary Tool Bag - SilverSemirigid Bigfoot bag.Specifications:Dimensions: 50L x 30H x 25W Specifications: Type: Tools & Accessories Box Dimensions: 6"H x 11"W x 23"L WT: 3.5 lbs UPC: 8058341049174

Read more less

Large Helm Pad - Storm Grey/Black with SeaDek LogoHelm Pads are the perfect way to add extra comfort and protection to your boat’s helm, and SeaDek Helm Pads are by far the softest and most comfortable available.  Your knees and back will thank you after a day on our Dual Density helm pad.  Featuring an ultra-comfortable low-density .7" foundation with our legendary standard .1" brushed top layer for traction and durability, no boat is complete without this essential addition.  All Dual Density Helm Pads utilize a robust 3M™ adhesive for an easy peel and stick application.Technical Specifications: Dimensions  (L x W x Thickness) - 39" x 16"" x .8" Color - Storm Grey/Black with SeaDek Logo Material - Closed cell PE/EVA foam *Sold as an Individual

Read more less

Large Offset Trolling Motor Plate for Garmin KrakenThe Sea Brackets Large Offset Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Dimensions:18.5" x 15.5" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Large Offset Trolling Motor Plate for Minn Kota QuestThe Sea Brackets Large Offset Trolling Motor Mounting Plate, designed for Minn Kota’s RTA-55 or RTA-83 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Minn Kota’s RTA-55/RTA-83 Quick Release Bracket Backing disk from Sea Brackets or an alternative backing support system 1/4–20 tapered Phillips machine screws, fender washers, and lock nuts 3/8–16 Flathead Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

14" Straight Trolling Motor PlateThis trolling motor mounting plate is manufactured using 6061 T6 aluminum, which is primed, and powder-coated with added UV protection for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coat, as well as gaged for accuracy and consistency for ease of bolt engagement. Sea Bracket's manufacturing process is so reliable that the bracket can be used universally for both port and starboard installation.1/2" 6061 aluminum (compatible with Rhodan QRB, Minn Kota RTA-54-RTA-62-RTA-42).Specifications:Plate Dimensions (inches): 14" x 8" x ½”Suggested hardware: 1/4–20 tapered Phillips machine screws, fender washers, backing plates, and locknuts  316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54/ RTA-62

Read more less

18" Straight Trolling Motor PlateThis trolling motor mounting plate is manufactured using 6061 T6 aluminum, which is primed, and powder-coated with added UV protection for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coat, as well as gaged for accuracy and consistency for ease of bolt engagement. Sea Bracket's manufacturing process is so reliable that the bracket can be used universally for both port and starboard installation.1/2" 6061 aluminum (compatible with Rhodan QRB, Minn Kota RTA-54-RTA-62-RTA-42).Specifications:Plate Dimensions (inches): 18" x 8" x ½”Suggested Hardware: 1/4–20 tapered Phillips machine screws, fender washers, backing plates, and locknuts  316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54/ RTA-62

Read more less

Large Offset Trolling Motor PlateThe trolling motor mounting plates, supplied by Sea Brackets, are manufactured using 6061 T6 aluminum, primed and powder coated with added UV protection, for a high-quality and durable product. The tapped holes in the brackets are clean and free of powder coating, as well as gaged for accuracy and consistency for ease of bolt engagement. The manufacturing process is so reliable that the brackets can be used universally for both port and starboard installation.Large 1/2" 6061 Aluminum (compatible with Rhodan QRB, Minn Kota RTA-54-RTA-62-RTA-42 ) offset mounting plate. (18.5” x 15.5” x 1/2”).Suggested Hardware: 1/4" - 20 phillips flat head machine screws Fender washers, backing plates, and locknuts 316 stainless steel is ideal for corrosion prevention Mounting hardware that comes with the Rhodan quick-release bracket or mounting hardware that comes with the Minn Kota RTA-54

Read more less

Quick Reference Celestial Navigation CardA simplified, yet complete Celestial Navigation system. Includes everything you need: sextant use and corrections, star finder for 18 stars, data entry form, and step-by-step sight reduction and plotting procedures. May be scored and separated; a large portion fits in the sextant case for quick reference, and a small part acts as a waterproof data reduction card.

Read more less

Ultimate Spatula - Stainless SteelAt Toadfish, they love to grill. They love to cook on old seasoned cast iron. But when it comes to handling delicate proteins Toadfish could never quite find the right tool for the job. So they set out to do the impossible…innovate a spatula. The result is a fine-tuned, all-stainless steel masterpiece with no detail overlooked. It sits balanced, weighted, and secure in the hand with a perfectly thin, flexible tip. When you set it down it boasts a built-in spoon rest keeping your surfaces clean and your food sanitary. This is the last spatula you will ever buy.Toadfish Model Number: TFSPATULAFeatures: Full stainless steel construction Thin flexible tip Built-in spoon rest Rubber inlay for increased grip Handwash Only Dimensions (inch): 14.5" x 3"

Read more less

Flange Adapter KitSmall but necessary instrument that will save your money and time.   Flange Adapter Kit for Tubular Level Sensors from 80 to 54mm.Flange Adapter Kit can be adapted to any Veratron liquid level sensors.Features:Tank mounting adapter from 80mm to 54mm*Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Silver Diameter (Inches): N/A Box Dimensions: 1"H x 4"W x 4"L WT: 0.55 lbs UPC: 7640178729230

Read more less

LinkUp Analog to NMEA 2000 GatewayThe resistive-type LinkUp gateway provides an easy method to convert vessel and engine information to NMEA 2000.Easily installed, the LinkUp Gateway replaces the original wiring, delivering power to both the LinkUp device and sensor from the NMEA 2000 backbone while still being complaint with the NMEA 2000 certification requirements. Configuring the LinkUp Gateway is simple using a mobile device and the companion LinkUp Configuration App for Android or IOS.Each device has a built-in passive NFC antenna, so the parameters of the sensors are wirelessly configured to type, instance and warning threshold on the mobile device which is then "tapped" against the LinkUp device for instant data download. Features: User-friendly configuration through wireless interface and companion smartphone App Sensor Cable length - 25cm NMEA 2000 Cable length - 25 cm Tap to download parameters Mobile App for Android or IOS No power required to program No certification required Bi-directional communication, programming interface or data recovery Supported Sensors: Fuel Level Oil/Boost Pressure Fresh/Waste Water Level Oil/Gear Oil/Coolant Temperature Trim Tabs Rudder Angle Technical Specifications: Standard M12 NMEA 2000 plug LED Notification  Operating Voltage - 6 - 16.5V Nominal Voltage - 12 V (from NMEA 2000 network) IPX7 Rated Sensor Plug - Superseal Female 2 Pin Counterpart Sensor Plug - - Superseal Male 2 Pin *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Owner's Manual (pdf)Brochure (pdf)

Read more less

7" Non-Locking Swivel Base - E-Coat FinishFeatures: 6-3/4″ Square x 1-1/8″ High, With 4 Hole Mounting Pattern 0-Degree Non-Locking Swivel Rotates 360° Mild Steel E-Coat Finish WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

52MM (2-1/16") ViewLine Boost Pressure Gauge 2 Bar/30 PSI - Black Dial & Round BezelVeratron ViewLine offers a comprehensive modular, modern series of instruments for engine monitoring.More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, we offer an innovative comprehensive standard instrumentation platform which is also available for outboard engine use.  ViewLine provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.The ViewLine 52 mm Gauges are available in black or white dial versions, which are always completed with a round bezel in identical color. Interchangeable bezel option.Features: 8 pole Tyco/Hirschmann MQS plug  Red LED Via Plus And Min Warning Light Operating voltage 8–32 V  Input signal: standard Ω values  Optional make-point switch can be connected  Reverse polarity protection  Anti-fog double lens  Front side protection rating IP67  52 mm installation diameter  50 mm installation depth  In the Box: Gauge Connection Cable Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Series: ViewLine Gauge Type: Boost Gauge Size: 2-1/16" Box Set: No Box Dimensions: 4"H x 6"W x 6"L WT: 0.4 lbs UPC: 7640178723023 Owner's Manual (pdf)

Read more less

SingleViu 52mm (2-1/16") Voltmeter for 12V Systems SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes. These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.Features: RGB LED Illumination (default illumination set to White)  Water Resistant Front & Rear  Includes Wire Harness Molex MX 150 8 Pin Connector Voltage 12-24V Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 12-24V Series: SingleViu Gauge Type: Voltmeter/Ammeter Gauge Size: 52mm Box Set: No Box Dimensions: 4"H x 4"W x 6"L WT: 0.45 lbs UPC: 4103590683595 Owner's Manual (pdf)

Read more less

ATLAS™ Jack Plate Replacement Rocker SwitchGenuine Replacement Parts for Atlas Hydraulic Jack Plate. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Dual Station Floating Ground - 400 PSI 1/8-27NPTFeatures:Ground - Floating  Connection - Knurled Nut Voltage - 6 - 24V Thread - 1/8-27 NPTF Max. Pressure Range - 400 PSI / 25.58 Bar  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 2"H x 2"W x 5"L WT: 0.35 lbs UPC: 754059005065

Read more less

Stainless Steel Pulpit Flagpole The corrosion resistant formed 304 stainless Pulpit Flagpole fits 7/8" or 1" tubing. Each flagpole comes complete with split rings for easy flag attachment and has a polyethylene spacer to reduce scratching of the rail. Maximum speed 10 MPH. Fasteners included. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 1"W x 18"L WT: 0.15 lbs UPC: 035514328043

Read more less

Deluxe Stainless Steel Wiper Blade - Black - 26"These blades work well on curved or flat windshields.Features: Works well on curved or flat windshields All stainless steel construction Marine grade silicone squeegee

Read more less

Twist Type Hatch Adjuster with Elbow - 14" Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple twist knob to lock into position. Great for dock box lids, hatches, windshields, etc.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Plugmate™ Garboard Wrench The Garboard wrench features multiple deck keys. Constructed of durable injection molded polypropylene it fits standard garboard plugs as well as "T" style plugs. The 520045-1 includes one replacement plug stored in handle.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Rotating Hose Connection for LP, LSS & NLP - 50mmReplacement rotating Inlet hose port for VETUS LP40, LSS40 and NLP40 Waterlock Mufflers. Supplied complete with O Rings.

Read more less

Neutral Button Kit for SICO & SISCOFeatures: Neutral Button Kit Specifically for VETUS SICO and SISCO

Read more less

Set O-Ring & Cover for Waterfilter 330Features:Vetus part #FTR3301 is replacement strainer cover and o-ring for all Vetus FTR330 series raw water strainersSpecifications:Strainer size: 13 (33/64") to 38 mm (1-1/2")Note: Do not overtighten

Read more less

HandHeld Electric Horn - BlueThe Hand Held Electric Horn features a weatherproof build and shock resistant construction. Meets all US Coast Guard requirements.Features: Solid state electronics Shock resistant construction Size: 7" high x 2.75" wide Meets US Coast Guard requirements Requires one 9-volt battery, not included Specifications: Color: Blue Box Dimensions: 4"H x 7"W x 12"L WT: 0.4 lbs UPC: 601373545176

Read more less

Replacement Portlight Lens Only - 5" x 12" - SmokeReplacement lens only for Beckson Opening PortsFeatures: 5" x 12" Smoke

Read more less

Electronic Pulse Ignition Retro-Fit Kit - 10-904Upgrade and replacement piece for the Piezo igniter.  The Electronic Pulse Ignition kit lights the first time and every time with the battery operation.  Includes one (1)  AAA battery.Compatible With: 10-960 12-962 *Sold as an Individual .

Read more less

Zinc Anode Set f/Bow Thruster - 35/55 kgf Bow ThrustersSpare set zinc anode for 35/55 kgf bow thrusters. Supplied with two stainless steel allen head countersunk set screws. Specifications: Material: Zinc Box Dimensions: 1"H x 4"W x 6"L WT: 0.4 lbs UPC: 8717372277528

Read more less

Bow Thruster Extension Cable - 33'Connection cable 33' for use with Vetus thruster control panels. Quick Guide (pdf)

Read more less

Liquid Soap Holder Holds 10-1/2oz oval bottle 3-3/4"W x 2-3/4"D x 4-3/8"H

Read more less

Dish/Cup Holder Holds 4 each of plates and cups 19-3/4" L x 4-1/4" D x 11-1/2" H

Read more less

Standard Cordsets50Amp 125/250V PowerCord Plus® Cordsets (4-Wire) All Marinco® cordsets are made of the highest quality, marine-grade construction with features you won't find on other power cords: Watertight molded plug and connector for safety and durability Heavy duty, super flexible marine-grade cable (50 amp 6 gauge) All models include a standard threaded ring for hook-up to ordinary threaded inlets Corrosion resistant, nickel plated contacts Power Indicator Light: Boatside connector features a molded-in LED light. When it glows red, you know you have power to the boat. Contour Grip with Thumbprint Locator: Both plug and connector ends are molded to fit the contour of your hand. When the thumbprint is in the 12 o'clock position, the blades line up for easy connection. Marinco's Easy Lock™ system: Quickly locks the cord set to the inlet in just 1/8 of a turn. The exclusive locking tabs engage slots built into all Marinco® inlets. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage: 125/250v Type: Cordset Length: 50' Amperage: 50a Box Dimensions: 9"H x 17"W x 19"L WT: 38 lbs UPC: 093344309793 Quick Guide (pdf)

Read more less

Scanpod Slim Deck Pod - Up to 8" DisplaySolve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse.Features: Fits up to 8” displays Usable face 11.4W x 7.5H Swivel & Tilt BaseOne handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position Best viewing angleAn adjustable ball joint allows range of movement and multiple mounting angles Added StrengthInner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration Overhead mountingDeck Pod models can be overhead mounted. Hassle Free Install & Service Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. Increased Protection Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it wont deteriorate over time. Supplied UncutAs standard you will receive your Scanpod uncut Specifications: Cut/Uncut: Uncut Mounting Style: Deck Usable Face: 11.4"W x 7.5"H Box Dimensions: 8"H x 10"W x 13"L WT: 6.9 lbs UPC: 5060114794283 Quick Guide (pdf)

Read more less

Electric Hatch Lift- 12-VoltStroke: 24"L.O.A Retracted: 41"L.O.A. Extended: 65"12 and 24-Volt with 2 foot leads and deutsch connectors. Inline motor design delivers over 500 pounds of force. Includes high impact, corrosion proof mounting brackets and stainless steel pull pins. Features: Clear anodized aluminum tubing Complete with 2 foot lead and Deutsch plug Clutchless ball screw design will not drift- never binds and runs in sync on dual lift applications Inline motor design delivers over 500 pounds of force Water resistant and made entirely of non-corrosive materials Ball screw spins freely when hatch is fully opened or closed eliminating limit switches and burned out motors High impact, corrosion proof mounting brackets with stainless steel pull pins Powdered metal gears for strength and precision Stainless steel ram locks in any position CE-certified, ignition protected and ABYC compliant WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

52MM (2-1/16") OceanLink Fuel Level Gauge - Black Dial & BezelOceanLink 52 mm Vessel Status Gauges are connected directly to any OceanLink Master unit using the patented EasyLink serial bus connection.  Up to 16 EasyLink gauges for each Tachometer or GPS Speedometer can be daisy-chained together.  Interchangeable bezel option. Features: AMP Superseal Easylink 270° pointer deflection angle Reverse polarity protection Anti-fog double lens Front & rear protection rating IPX5 Operating temperature range -20 °C / +70 °C Nominal voltage - 12/24V Hole diameter - 52MM In the Box: Gauge Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Box Set: No Gauge Type: Fuel Level Gauge Size: 2-1/16" Series: OceanLink Box Dimensions: 4"H x 5"W x 5"L WT: 0.35 lbs UPC: 7640178721302

Read more less

Premium Teak Cleaner & Brightener - Restore & Enhance Wood Grain  - 32 ozRestores weathered and gray teak to its natural warmth and wood grain in one step. Designed for marine and outdoor furniture requiring refinishing or preparation for oiling. The gentle formula cleans without harsh scrubbing while preserving wood integrity.Directions:For badly weathered, grey, or black teak, apply Teak Cleaner & Brightener directly to dry wood. Use a stiff-bristle cleaning brush or Star brite Medium Scrub Pad to spread product evenly. Allow Teak Cleaner & Brightener to remain on the surface for approximately two to three minutes before scrubbing. Scrub in the direction of wood grain to ensure deep cleaning before thoroughly rinsing wood with fresh water. Severely dirty or stained wood may require a second application and use of Star brite Stainless Steel Teak Scrub pad. For lightly weathered teak, wet wood with fresh water, apply Teak Cleaner & Brightener, using a bristle brush or medium scrub pad to spread evenly over surface to be treated. Scrub lightly to remove dirt and stains. Rinse thoroughly with fresh water. After cleaning wood, apply Star brite Premium Golden Teak Oil to enhance natural wood color and preserve and protect the restored wood. Rinse off spills and drips onto surfaces not being treated. Avoid contact with fabrics.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Teak Box Dimensions: 2"H x 4"W x 10"L WT: 2.4 lbs UPC: 071247949322

Read more less

Stiff Deck Brush with Long Handle - Heavy-Duty Marine ScrubberThe Star brite Stiff Deck Brush with Long Handle is your ultimate solution for tackling tough cleaning jobs on boats, decks, and other hard-to-reach surfaces. Built to last, this marine-grade brush is designed for durability and efficiency. The stiff, tough bristles are perfect for scrubbing away dirt, grime, and algae, ensuring your boat or deck remains in top condition. The extra-long handle gives you the reach you need to clean every corner, even in the most challenging spaces. Crafted from high-quality materials, this deck brush is lightweight yet strong, making it easy to maneuver without sacrificing strength. The ergonomic design of the handle ensures a comfortable grip, reducing hand fatigue during prolonged use.Features: DEEP CLEANING POWER - Stiff bristles effectively remove dirt, grime, and algae, reaching deep into cracks and grooves for a thorough clean, perfect for boats, decks, and more. LONG HANDLE FOR HARD-TO-REACH AREAS - Extra-long handle allows you to clean challenging spaces without bending or stretching, making your cleaning tasks easier and more efficient. BUILT TO LAST - Constructed with marine-grade materials, this brush is designed for durability and long-term use, withstanding harsh environments and frequent use. ERGONOMIC DESIGN - Comfortable grip handle reduces hand fatigue during extended cleaning sessions, ensuring you can work longer without discomfort. RESISTS CHEMICALS & UV RAYS - Bristles are resistant to chemicals and UV rays, maintaining their effectiveness and durability even after prolonged exposure to the elements. LIGHTWEIGHT & EASY TO MANEUVER - Despite its sturdy construction, this brush is lightweight, making it easy to handle and maneuver without sacrificing strength. PERFECT FOR MULTIPLE SURFACES - Ideal for cleaning not just boats, but also decks, patios, and other outdoor surfaces, making it a versatile addition to your cleaning tools. NO NEED FOR LADDERS - Long handle eliminates the need for ladders or awkward positions, allowing you to clean elevated or hard-to-reach areas safely from the ground. PROFESSIONAL-GRADE RESULTS - Trusted by professionals in the marine industry, this brush delivers results that meet the highest standards of cleanliness and maintenance. EASY TO CLEAN & MAINTAIN - Simply rinse the brush after use to remove debris, and it’s ready for the next job, ensuring a long lifespan with minimal upkeep.

Read more less

Telescoping Boat Hook - Floating, Extends 4.5-8'The Star brite Extending Boat Hook is a multi-purpose essential for every boater. Crafted from lightweight, corrosion-resistant aluminum, this telescoping pole extends from 4.5 feet to 8 feet, giving you reach when you need it most. The molded high-impact hook helps with docking, grabbing lines, fending off pilings, and retrieving gear. Designed with a non-slip handle for secure grip and engineered to float if accidentally dropped, this boat hook is built to perform in real-world marine conditions. Ideal for both seasoned sailors and weekend cruisers.Features: Telescoping design extends from 4.5 ft. (137 cm) to 8 ft. (243 cm) Lightweight yet durable marine-grade aluminum construction Molded multi-function hook helps with docking, lines, or retrieval Floats if dropped – ideal for onboard safety and peace of mind Non-slip foam grip ensures comfort and control during use Corrosion-resistant materials built to withstand saltwater exposure Perfect for boats, docks, marinas, and general marine tasks Compact storage size when collapsed for easy stowing Twist-lock mechanism keeps the pole securely at the desired length Trusted Star brite performance – built for life on the water

Read more less

Front Seal Kit for Up Series Helms UP, UP28, UP33, UP39Seal Kit 40875V Steering Helm Front Shaft. Specifically for UP Series Helms: UP25, UP28, UP33, UP39, and UP45.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Stainless Steel Stud 1.25" Base 10 x 24 Threads 1.00" Tall - 15 QuantityStuds with smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items that require a smaller stud diameter. These studs can be bonded from either surface of the base plate.

Read more less

Brass Plug w/O-Ring for PumpsTypical Application:Compensating line brass plug of the UP series helmsSpecifications: 1/4 NPT PLUG Helm Side = 1/4 NPT

Read more less