Chesapeake White SS 2" Water Pressure Gauge (30 PSI)Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.A pressure gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure.2" - Hole size: 2.0625" (53mm)Specifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life 12 VDC negative ground Can be adapted for 24 VDC systems Dual Scale - Imperial and Metric Factory P/N OP1022*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Water Pressure Series: Chesapeake White Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Box Set: No Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 759266138124 Quick Guide (pdf)

Read more less

Euro Black 2" Trim Gauge f/ Johnson/Evinrude/Suzuki OutboardPerimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.2"- Hole Size: 2.0625" (53mm)For Engine Types:Johnson/Evinrude/Suzuki OutboardsSpecifications: Anti-scratch glass lens 12 VDC negative ground Perimeter-lighted Black dial Can be adapted for 24 VDC systems Factory P/N GP9305*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Trim Guage Series: Euro Black Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Box Set: No Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs UPC: 759266128279 Quick Guide (pdf)

Read more less

Sun-DURA® 10' Talon Cover - GreyUniversal Power Pole and Talon covers are an excellent solution for protecting the finish and prolonging the original appearance of these costly anchoring devices. Slip-on design makes for quick and easy installation and removal. Attached strap system with heavy-duty buckle keeps the cover securely in place. Power Pole Cover is available in 4 sizes. Talon Cover is available in 3 sizes.Sun-DURA®Excellent Quality100% Solution Dyed Polyester means colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7oz. marine grade polyester that offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Our own unique finish provides exceptional water repellency while maintaining breathability for the health of the boat. Made in USA and Imported. (7 Year Limited Warranty)Features: Construction - Join seams are folded four-ply. No raw edges  Stitching - Double stitch construction for added strength and durability  Weather Resistant - Anti-wick thread throughout construction  Double Reinforced - Tie-down loops sewn into hem  Best Warranty in the Business - Best Warranty in the business based on fabric selection All Carver Covers are Made in the USA Specifications: Color: Grey Cover Type: Talon Box Dimensions: 4"H x 9"W x 10"L WT: 1.5 lbs UPC: 194092564202

Read more less

Boat Cover Reinforcement/Repair KitKit includes one square yard of self adhesive material. Use it to add extra padding to stress points from windshields, trolling motors, etc. or to patch wear areas and tears that may develop over time. Simply cut to desired size and apply to clean, dry surface. Specifications: Type: Parts Box Dimensions: 2"H x 8"W x 11"L WT: 0.8 lbs UPC: 813095022570

Read more less

Boat Cover Adjustable Support Pole with Boat Vent IIReplace a conventional support pole with one that provides an air vent to reduce moisture, heat and mildew under the cover. Includes an adjustable (22″ to 70″) anodized aluminum pole, boat vent and simple installation instructions.These lightweight telescoping poles are designed to support your cover so that water does not pool. Specifications: Type: Parts Box Dimensions: 3"H x 7"W x 23"L WT: 2.15 lbs UPC: 813095022426

Read more less

6″ Extreme Gen 3 Action Series Jack Plate - SilverExtreme Gen 3 series supports motors up to a 15″ mounting width.  If using a wider motor such as the Yamaha XTO, a set of 1″ spacers will be required for clearance.Bob’s has re-engineered their world-famous jack plate for 550+hp engines, including V10s.The Extreme Gen 3 Action has the all-in-one style pump, built into the jack plate so no hoses or pump need to be mounted inside the boat.  This makes rigging the boat extremely easy!The Extreme Gen 3 Action series jack plates are available in 4, 6, 8, 10 & 12″  setbacks to suit every application.Jack plates are no longer just for fishing boats; offshore boaters will enjoy the extra speed and increased fuel economy from BMS’s line. Jack plates are used to improve an outboard boat's speed, hole shot, fuel efficiency, and help the boater navigate in shallow waters. Includes:  Jack plate Wiring harness Relays Rocker-style switch Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Dress White 2" Water Temperature Gauge (100-250°F)Perimeter-lighted White dial with bold Black graphics, White aluminum bezel, contoured Black pointer and flat glass lens.A temperature gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the temperature.2" - Hole Size: 2.0625" (53mm)Specifications: Anti-scratch glass lens 12 VDC negative ground Can be adapted for 24 VDC systems Dual Scale - Metric and Imperial Factory P/N GP9120*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Water Temperature Series: Dress White Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Box Set: No Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs UPC: 759266131101 Quick Guide (pdf)

Read more less

Deluxe All-Stainless Single Trumpet Horn - 24V Features: All Stainless Steel Inside & Out 304 Stainless Steel inside and out including a sealed sound unit No rust Guaranteed for 5 years. All meet ABYC A-23 for boats up to 12 meters Pre-wired It fits existing hole patterns Specifications: Dimensions: 16-1/2"L, 4"W, 4-3/4"H (42 x 10 x 11.5 cm) Max Amp Draw: 2 Amps Rating: 118 db@ 1 Meter Specifications: Voltage - Input Range (Volts): 24v Color: Stainless Box Dimensions: 4"H x 9"W x 19"L WT: 2 lbs UPC: 768170124277

Read more less

Deluxe All-Stainless Dual Trumpet Horn - 24VFeatures: All Stainless Steel Inside & Out 304 Stainless Steel inside and out including a sealed sound unit No rust Guaranteed for 5 years. All meet ABYC A-23 for boats up to 12 meters Pre-wired It fits existing hole patterns Specifications: Dimensions: 18-1/2"L, 8"W, 5"H (47 x 20.5 x 12.5 cm) Max Amp Draw: 4 Amps Rating: 122 db@ 1 Meter Specifications: Voltage - Input Range (Volts): 24v Color: Stainless Box Dimensions: 4"H x 11"W x 21"L WT: 3.65 lbs UPC: 768170124284 Quick Guide (pdf)

Read more less

16" Setback Action Series Hydraulic Jack Plate - SilverThe hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market. The first Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.The internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate™.Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.Features: Pump inside jack plate Plate weight: 46lbs 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift Large powerful motor that can lift heavy outboards under full power Can be converted to have pump inside boat if owner desires to change styles Automotive grease nipples for easy lubrication Tension rods Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series) Pre drilled for dual side mount Power Pole brackets. Includes Jack plate, wiring harness, relays, rocker style switch Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

30 AMP SmartPlug/Twist Type Cordset - 50'For many years boaters have experienced the safety, security and simplicity of SmartPlug products on the boatside while still dealing with the same old issues created by legacy twist-type products on the dockside.   Those days are changing with the introduction of SmartPlug's new dockside product offering.  SmartPlug has applied decades of experience and customer feedback to create a product that allows you to upgrade your shore power connection with SmartPlug technology. The 30 AMP 125 V cordset provides a complete weatherproof power solution. The cordset includes the SmartPlug connector for the Boatside and a Twist Type Plug connector for the Dockside.Features: Multi-Point Locking System - Side clips lock the body securely into the inlet, which eliminates any stress on the electrical connection from movement of the power cord. Weatherproof Seals - Silicone gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet. LED Power Indicator Light – On the top of all SmartPlug female ends, two LED indicator lights.  One Red and one Blue LED light for Safe/Unsafe Electrical Power Indication under Reverse Polarity Conditions. Tinned Wire – All SmartPlug marine cords have tinned wire to minimize corrosion. Technical Specifications: Length - 50' Color - White Boatside Connection - 30 AMP/125 V SmartPlug Dockside Connection - 30 AMP/125 V Twist Type Plug *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage: 125v Type: Cordset Length: 50' Amperage: 30a Box Dimensions: 4.00"H x 12.00"W x 12.00"L WT: 15.2 lbs UPC: 682500441356 Owner's Manual (pdf)Brochure (pdf)

Read more less

Mirror Glaze™ Quick Detailer - 1 Gallon Meguiar's Mirror Glaze® Quick Detailer is a one-step cleaner/wax, specially formulated for high-production paint reconditioning. It works to quickly and safely to remove oxidation and blemishes while restoring deep gloss and providing a durable wax finish.Features: One-step cleaner/wax, specially formulated for high production reconditioning Quickly and safely removes oxidation and blemishes Restores deep gloss and provides a durable wax finish Formulated for use by Hand, DA Polisher, or Rotary Buffer Larger 1 gallon size is more cost effective for body shops and professional detailers Specifications: Type: Waxes & Polishes Box Dimensions: 4"H x 7"W x 12"L WT: 8.65 lbs UPC: 070382166014

Read more less

Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz (300ml) Cartridge - WhiteSikaflex®-221 is a high-quality multi-purpose non-sag 1-c polyurethane sealant/adhesive that cures on exposure to atmospheric humidity to form a durable elastomer. Meets approvals ASTM C920 types Sikaflex®-221 is tested and classified by ANSI/UL 723 “Test for Surface Burning Characteristics of Building Materials”.Uses: Sikaflex®-221 bonds well to a wide variety of substrates and is suitable for making permanent elastic seals of high adhesive strength. Suitable substrate materials are wood, metals, metal primers and paint coatings (2-c systems), ceramic materials, and plastics.Features: Highly elastic and durable Resistant to aging and weathering exposure Non-corrosive Can be sanded and overpainted NSF-registered, Proprietary Substances and Nonfood Compounds (black, grey, and white) UL listed for potable water (black, grey, and white) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

9" x 12" Standard Trim Tab Kit w/Double Rocker Switch - 12VLenco Electric Complete Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.Standard Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.Lenco Trim Tab Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches.Kit includes:  Self-contained sealed keypad Control box 36" Pigtail Specifications: Suggested Boat Length: 16' to 25' Length of Tab: 9" Width of Tab: 12" Blades: 12 Gauge Stainless Steel Finish: Smooth Switch Kit: Double Rocker Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Genuine Sheepskin Replacement BonnetKeeps your Soft Washing Tool working like new.  Extra bonnets are ideal for specialized use.  Keep one bonnet for you enclosures and one for your vehicle.Features: Works with Soft Washing Tool Uni-Snap SW19140 Genuine sheepskin material Holds plenty of soap and water. *Sold as an Individual Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 5"W x 12"L WT: 0.2 lbs UPC: 633590191553 Brochure (pdf)

Read more less

Double Rocker Switch Kit (Single)Double Rocker Switch available for Standard Trim Tabs, Standard & HD Performance Tabs (single actuator). Does not have our Retractor feature. Includes Deutsch connectors, 36" power pigtail and mounting hardware.Kit Contents #122 Carling Double Rocker Switch Deutsch Conntectors 36" Power Pigtail. Installation hardware included Specifications 3 Year Warranty For Single Actuator Trim Tab Systems/ 12 & 24-Volt System Type: Single Actuator Class: Fuel Efficient Compatibility: Any Boat WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

12" x 18" Edge Mount Trim Tab Kit without Switch Kit -12V Lenco Electric Edge Mount Trim Tab Kits make your boat ride smoother, dryer, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs.Kit Contents: 2 each of 12-gauge stainless steel trim tab blades 2 each of #15054-001 actuator with 6' leads & Deutsch plugs 2 each of #30133-103 20' actuator extension wiring harnesses 2 each of #15085-001 (116) upper mounting brackets with gland seal 2 each of #50014-001 (119) lower mounting brackets 1 each of the Lenco owner’s / installation manual All necessary stainless steel mounting hardware Specifications: Suggested Boat Length: 26' to 36' Length of Tab: 12" Width of Tab: 18" Hinge Height: 2" Minimum Transom Height: 11" Blades: 12 Gauge Stainless Steel Finish: Smooth Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Heavy Duty Performance Trim TabsFast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are Electro-Polished 12 Gauge - 304 SS with 1" turned up edges, 85 degree inside taper, and 1/4" diameter hinge pin. Extreme Duty actuators with 5/16" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.We make the best boats better!™Running wide open in rough seas isn't for the faint of heart. Aggressive boating requires durable boat accessories. Lenco's HD series of trim tabs are built to handle whatever you or Mother Nature might throw at them. Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different? All stainless steel construction (no dissimilar metals), Electro-Polished Blades for long lasting good looks Actuator speed is precise and controllable so there are no surprises at top speeds Models have massive backplates and adjustable mounting channels with thru-bolted actuators for the ultimate in strength and reliability Models use solid stainless steel billet rams that are chemically polished for unsurpassed durability Actuators Instant response Fully submersible, maintenance-free and sealed for life High-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case 5/16" stainless steel bolts Tactile Switch w/ Indicator LED for all Single Actuator Trim Tab SystemsFeatures: Self-contained, sealed keypad Self-contained, sealed control box module Fade/smudge-proof, laser engraved graphics Plug & play switch wiring harness connector Includes 36" power pigtail for control box 2" hole cut-out size, overall size 2.75" x 2.75" Built-in retract feature returns tabs to a fully retracted position when power is removed 2 high-intensity L.E.D. indicator displays show the exact position of our trim tabs at all times Photo eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sunlight 12 & 24-volt compatibility Includes Self-Check Feature Each kit contains: Tactile LED Indicator Switch Kit 2 actuators wth 6' Lead and Deutsch Plugs 2 12 Gauge SS Electro-Polished trim tab planes 2 20' Actuator Extension Wiring Harnesses Boat-Mounting Hardware supplied by customer WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Edge MountMounts the actuator at the trailing edge of the plane, requiring 4" less transom height than standard mountTrim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious. Instant response electric actuators for precise control Everything is fully submersible, maintenance-free and sealed for life Self-locking ballscrew will not drift, even while backing down 12-gauge laser cut stainless steel trim tab planes High-impact corrosion-proof mounts look great through years of abuse Clean, time and space-saving installation Actuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case 316 super buff stainless steel rams Tactile Switch w/ Indicator LED for all Single Actuator Trim Tab SystemsFeatures: Self-contained, sealed keypad Self-contained, sealed control box module Fade/smudge-proof, laser engraved graphics Plug & play switch wiring harness connector Includes 36" power pigtail for control box 2" hole cut-out size, overall size 2.75" x 2.75" Built-in retract feature returns tabs to a fully retracted position when power is removed 2 high-intensity L.E.D. indicator displays show the exact position of our trim tabs at all times Photo eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sunlight 12 & 24-volt compatibility Includes Self-Check Feature Each Kit Includes: Tactile LED Indicator Switch Kit 2 Actuators with 6' lead & Deutsch Plugs 2 20' Actuator Extension Wiring Harness 2 12 gauge Stainless steel trim tab planes 2 Upper Mounting Bracket with Gland Seal 2 Lower Mounting Bracket All stainless steel mounting hardware WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Edge MountMounts the actuator at the trailing edge of the plane, requiring 4" less transom height than standard mountTrim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious. Instant response electric actuators for precise control Everything is fully submersible, maintenance-free and sealed for life Self-locking ballscrew will not drift, even while backing down 12-gauge laser cut stainless steel trim tab planes High-impact corrosion-proof mounts look great through years of abuse Clean, time and space-saving installation Actuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case 316 super buff stainless steel rams Standard Solid State Tactile Switch Kits with Retractor Feature#15069-001 (124SSR)For 12-volt single actuator systems. Control box is waterproof, self-contained, sealed, solid state, Deutsch connected for easy Plug & Play installation, and features built-in retractor. Kit includes 36" power pigtail and nylon nuts for mounting keypad. Colorful display box.Features Built-In Retractor Feature Solid State Electronics Plug & Play Low Profile Design Self-Contained, sealed keypad & solid state control box with waterproof connectors Simple, Quick Installation Includes 36" power pigtail for control box 2" hole cut-out size, overall size 2.75" x 2.75' Each kit contains: Standard Tactile Switch Kit 2 Actuators with 6' lead & Deutsch Plugs 2 20' Actuator Extension Wiring Harness 2 12 gauge Stainless steel trim tab planes 2 Upper Mounting Bracket with Gland Seal 2 Lower Mounting Bracket All stainless steel mounting hardware WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

18" x 14" Heavy Duty Performance Trim Tab Kit w/o Switch Kit -12VLenco Electric Heavy Duty Polished Blade Trim Tab Kits are supplied with electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges, 85 degree inside taper and 1/4" diameter hinge pin. Kits equipped with Extreme Duty actuators with 5/16" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes. .Kit Contents: 2 each of 12-gauge stainless steel Electro-Polished trim tab blades  2 each of #15055-001 XD extreme duty actuators with 6' lead and Deutsch plugs 2 each of #30133-103  20' actuator extension wiring harnesses 1 each of the Lenco owner’s / installation manual Boat-mounting hardware supplied by customer Specifications: Suggested Boat Length: 22' to 42' Length of Tab: 18" Width of Tab: 14" Minimum Transom Height: 10.5" Blades: 12 Gauge Stainless Steel Finish: Electro-Polished Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Switch Required: 15069-001 or 15070-001 Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

VX250 Cold Machine Flat Roll-Bond Evaporator Plate for Volumes Up to 250LDesigned for flexibility and performance, the Dometic VX series evaporators bring precise, even cooling to any custom box configuration. Available in flat, O-box, and fan-cooled formats, each plate integrates cleanly into your design and connects easily to CX condensing units for a perfectly balanced refrigeration system.Features: Large roll-bond plate suited to high-capacity refrigeration up to 250L Extended plate length (30.7" × 10.6" × 0.6" mm) maximizes internal wall coverage Bendable plate in L-shape for optimal surface distribution in cooled compartment Ideal for larger galley refrigerators or fish boxes 2.2m refrigerant pipe length allows flexible compressor positioning Precision digital control compatibility with NTC temperature sensor for stable onboard cooling performance Owner's Manual (pdf)Brochure (pdf)

Read more less

StarPod Mini System with StarTower for Starlink Mini Dish (11.75 x 10.2″ Dish Size) *Starlink Dish Not IncludedStarPod Systems are designed to provide a strong, sturdy, and attractive mounting solution for Starlink on board boats with a hardtop, radar arch, or other flat mounting surface. The waterproof housing incorporates an internal swivel tube, which allows the dish to be rotated to optimize the view of Starlink satellites if necessary. The 10-degree housing angle facilitates rainwater runoff to prevent signal degradation that can occur when water accumulates on a flat-mounted Starlink dish. The StarTower base is solidly built with 8 mm-thick aluminum and powder-coated with a high-gloss white finish. The bottom base of the StarTower measures 7″ square.Be sure to choose the right StarPod System to match your Starlink dish model: For the Starlink Mini Dish (11.75 x 10.2″ dish size): SP100 Housing Only for DIY mounting (7″ diameter circular mounting surface) SPS1000 for mounting a Starlink Mini Dish on a Flat Surface *You’re already on this product page!* SPS1001 for mounting a Starlink Mini Dish on a Horizontal Rail SPS1002 for mounting a Starlink Mini Dish on a Vertical Rail SPS1003 for mounting a Starlink Mini Dish on a Thule WingBar Evo Roof Rack (COMING SOON) SPS2000 for Starlink Gen2 Actuated Dish (20.2 x 11.9″ dish size) SPS3000 for Starlink Gen3 Standard Dish (23.4 x 15.07″ dish size) What are the benefits of mounting a Starlink dish in a StarPod?StarPod protects Starlink and completely encloses the Starlink antenna in a very sturdy and attractive waterproof housing. Our testing has proven that there is no degradation of signal while inside the thermoformed acrylic-capped ABS housing.Mounting a Starlink dish inside a StarPod provides additional protection from water intrusion, just as all NavPods have done for other Marine Electronics for over 25 years.How do I mount a Starlink dish inside a StarPod?The kickstand base that comes with a Starlink Mini dish is not utilized when mounting inside a StarPod; only the dish itself is used. We recommend completing the initial Starlink setup process before mounting the dish inside a StarPod (refer to your Starlink setup/installation guide for this process). Once the initial Starlink setup process is complete, the dish can be mounted inside the StarPod housing (using the instructions and hardware included with the StarPod).All NavPods Feature: Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic-capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and the more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. StarPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The gasket will continue to do its job. Stainless Steel Hardware – We use all 316 stainless steel hardware that is supplied with each NavPod. Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods, including the StarPod. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.

Read more less

PT3010 Base Wedge f/PowerTower® Radar Mounts - 4°Enhance the performance of your radome with our tough, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway.Compatible with:Composite and Aluminum PowerTower®Features: Enhance the performance of your radome with the Universal Scanstrut 4° radar base wedge 4° Base Wedge for mounting under PowerTower® A tough, marine-grade, UV stable wedge  Compatible with radomes from most radar manufacturers Technical Specifications: Material - Marine grade Polymer Dimensions (L x W ) - 8" x 8" Angle - 4° In the Box: Wedge Base seal Instruction manual *Sold as an Individual  Specifications: Construction: Polymer Type: Wedges Height: N/A Box Dimensions: 1"H x 8"W x 8"L WT: 1 lbs UPC: 5060114790438 Quick Guide (pdf)

Read more less

NMEA Connector Kit without Guage (Only view On Graph)Garmin, Humminbird, Navico (Simrad/Lowrance) and Raymarine compatable. Please make sure to check your units compatibility and software version to make sure Jack Plates are supported, many older units do not have the newest software updates available to integrate.Features: Connect your Bob’s Machine jack plate to your Multi-Function Display and view your jack plate height. Simple plug and play technology into your NMEA backbone.

Read more less

4″ Hydraulic Action Series Kick-Back Jac - Powder Coated Gloss BlackThe best jack plate available meets the KickBack plate to form the new Hydraulic KickBack Jac! Bob’s jack plate with 6″ hydraulic stroke and 1.5″ built in structure lift offering a total of 7.5″ total lift! Delrin bushing throughout provide long life of smooth sliding, and pivoting. Navigate the shallows, and if you encounter a submerged object, you can jack up your motor and idle over allowing your motor to KickBack and prevent costly damage to the lower unit.Features: Patented design 4″ Setback Locking pins for reverse Grease able pivot points and slide plate area No spring or chains Tension rods 30 deg of tilt Delrin rollers and bearings for smooth operation; No need for chains or spring Motor tether attachment point for safety Locking pins to prevent plate from kicking out in reverse or trailering Grease able pivot points – automotive zerk fittings Rated up to 150 HP motors – BIA bolt pattern Unit weight: 48 lbs Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty WARNING: This unit is rated for outboard motors up to a maximum of 150 H.P. Do not encounter obstructions at speeds over 5 M.P.H and only in the forward direction. It is not designed or intended to encounter obstructions while the boat is being operated in the reverse direction.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

6″ Hydraulic Action Series Kick-Back Jac - SilverThe best jack plate available meets the KickBack plate to form the new Hydraulic KickBack Jac!  Bob’s jack plate with 6″ hydraulic stroke and 1.5″ built in structure lift offering a total of 7.5″ total lift!  Delrin bushing throughout provide long life of smooth sliding, and pivoting. Navigate the shallows, and if you encounter a submerged object, you can jack up your motor and idle over allowing your motor to KickBack and prevent costly damage to the lower unit.Features: Patented design 6″ Setback Locking pins for reverse Grease able pivot points and slide plate area No spring or chains Tension rods 30 deg of tilt Delrin rollers and bearings for smooth operation; No need for chains or spring Motor tether attachment point for safety Locking pins to prevent plate from kicking out in reverse or trailering Grease able pivot points – automotive zerk fittings Rated up to 150 HP motors – BIA bolt pattern Unit weight: 48 lbs Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty WARNING: This unit is rated for outboard motors up to a maximum of 150 H.P. Do not encounter obstructions at speeds over 5 M.P.H and only in the forward direction. It is not designed or intended to encounter obstructions while the boat is being operated in the reverse direction.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Transom/Engine 4.5" Bolt Kit *Set of 6Bolt Kit for jack plate installation. For motors with 1/2″ hardware requirements. Not for Mini Manual Jack Plate.Contains: 6 x 1/2″ SS Bolts 6-1/2″ Nylok Nuts 12 x Flat Washers 6 x Lock Washers

Read more less

Transom/Engine 3" Bolt Kit *Set of 6Bolt Kit for jack plate installation. For motors with 1/2″ hardware requirements. Not for Mini Manual Jack Plate.Contains: 6 x 1/2″ SS Bolts 6-1/2″ Nylok Nuts 12 x Flat Washers 6 x Lock Washers

Read more less

Transom/Engine 2" Bolt Kit *Set of 6Bolt Kit for jack plate installation. For motors with 1/2″ hardware requirements. Not for Mini Manual Jack Plate.Contains: 6 x 1/2″ SS Bolts 6-1/2″ Nylok Nuts 12 x Flat Washers 6 x Lock Washers

Read more less

6" Setback Action Series Hydraulic Jack Plate - SilverThe hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market. The first Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.The internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate™.Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.Features: Pump inside jack plate Plate weight: 46lbs 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift Large powerful motor that can lift heavy outboards under full power Can be converted to have pump inside boat if owner desires to change styles Automotive grease nipples for easy lubrication Tension rods Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series) Pre drilled for dual side mount Power Pole brackets. Includes Jack plate, wiring harness, relays, rocker style switch Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Deck Plug - Pedestal Seat Plug 0.75" Hole- BlackFeatures: Bob’s Pedestal Seat plug fills the hole when your seat is not in use Patent pending water tight system! O-ring sealed to keep water out of your dry boxes! Fits all 0.75″ holes 6061 Aircraft grade aluminum

Read more less

Transom/Engine 2.5" Bolt Kit *Set of 6Bolt Kit for jack plate installation. For motors with 1/2″ hardware requirements. Not for Mini Manual Jack Plate.Contains: 6 x 1/2″ SS Bolts 6-1/2″ Nylok Nuts 12 x Flat Washers 6 x Lock Washers

Read more less

6" Setback Action Series Hydraulic Jack Plate - Gloss BlackThe hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market. The first Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.The internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate™.Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.Features: Pump inside jack plate Plate weight: 46lbs 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift Large powerful motor that can lift heavy outboards under full power Can be converted to have pump inside boat if owner desires to change styles Automotive grease nipples for easy lubrication Tension rods Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series) Pre drilled for dual side mount Power Pole brackets. Includes Jack plate, wiring harness, relays, rocker style switch Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

The Big D - Trolling Motor HandleFeatures: Comfort grip handle Large D shape that fits your hands!  No more grabbing with only your finger tips! Cable molded into handle so can’t break out 3 different Stainless steel cable clamps allowing installation on 99.9% of all trolling motors! Strong Cable Works with most trolling motors *DOES NOT work with Lowrance Ghost or Garmin Force at this time.

Read more less

Transom/Engine 6.5" Bolt Kit *Set of 6Bolt Kit for jack plate installation. For motors with 1/2″ hardware requirements. Not for Mini Manual Jack Plate.Contains: 6 x 1/2″ SS Bolts 6-1/2″ Nylok Nuts 12 x Flat Washers 6 x Lock Washers

Read more less

Kicker Jac - Up to 40HP 4-Stroke Motors - SilverWith a maximum engine rating of 40 hp, BMS’s hydraulic kicker jack plate provides slow-speed power for cruisers, auxiliary power for sailboats and trolling power for fishermen. Sailboat skippers will appreciate the jack plate’s ability to reduce engine drag while under sail.For economy, powerboaters can fire up their kicker for no-wake zones, slow cruising or when navigating shallow backwaters. And, the jack provides anglers with the option of using just one motor for trolling and main power.The kicker jack is built with 6061 T-6 aircraft-grade aluminum to ensure high strength with minimal weight.All of Bob’s Machine’s hydraulic jack plate motors are mounted inside the boat for long life and easy maintenance.An optional wireless control kit allows the skipper to operate the jack plate remotely with a small key fob from anywhere on the boat.Features: Rated to 40HP 4 strokes Patented design has 16 inch (40.6 cm) lift Custom hose lengths are available Through hull fittings available 5 year warranty on hydraulic pump Optional wireless control Complete package including the kicker jac, hydraulic pump, 10′ hoses, wiring harness, switch and fluid. Limited lifetime warranty against structural defects Weighs 48 lbs (21.7 KG) plate weight This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Transom/Engine 4" Bolt Kit *Set of 6Bolt Kit for jack plate installation. For motors with 1/2″ hardware requirements. Not for Mini Manual Jack Plate.Contains: 6 x 1/2″ SS Bolts 6-1/2″ Nylok Nuts 12 x Flat Washers 6 x Lock Washers

Read more less

6" Fixed Setback Brackets with 1.5" Built-In Lift - SilverSetback brackets re-position the motor into cleaner water to increase propeller efficiency and minimize prop slippage. Drag is reduced and the boat exhibits more bow lift, which results in a drier ride. The increased distance between the propeller and the hull also improves boat operation in reverse.The fixed setback brackets are made of 5/8’s inch thick, heavy-duty 6061 T6 aircraft-grade aluminum and can handle up to 550-hp engines. They have the same industrial design and appearance as hydraulic jack plates to give an overall look and feel of consistency.Installing the brackets is easy. Remove the motor and install the brackets in the transom’s existing holes. Then re-mount the motor on the brackets.Because the brackets are designed to fit all motors with the standard BIA bolt pattern, there is no need to plug and re-glass the old holes. The brackets are also pre-drilled with two sets of mounting holes to provide different engine height adjustments.Features: Fixed Setback bracket rated for up to 550HP Designed for installation directly to transom and motor.  Not for use as spacer.  If you want to spacer jack plate back further, please see no lift version. 1.5″ of built-in lift Thick material and large radius make these the one of the strongest available! The fixed setback brackets provide advantages for all boaters, including improved fuel economy and better top speed.

Read more less

Pro Series Aluminum Blinker Switch - DualFeatures: Steering wheel switch - Dual Keep your hands on the steering wheel with this switch. Performance like a blinker switch in a car. Can be used for jack plate or tilt & trim on most motors. Aluminum housing and stalk. Designed with heavier spring than other similar products to handle extra weigh of handle, solid audible click/detent. Comes as complete kit with wiring, connectors, and instructions.

Read more less

Transom/Engine 7" Bolt Kit *Set of 6Bolt Kit for jack plate installation. For motors with 1/2″ hardware requirements. Not for Mini Manual Jack Plate.Contains: 6 x 1/2″ SS Bolts 6-1/2″ Nylok Nuts 12 x Flat washers 6 x Lock Washers

Read more less

6″ Hydraulic Action Series Kick-Back Jac - Powder Coated Gloss BlackThe best jack plate available meets the KickBack plate to form the new Hydraulic KickBack Jac! Bob’s jack plate with 6″ hydraulic stroke and 1.5″ built in structure lift offering a total of 7.5″ total lift! Delrin bushing throughout provide long life of smooth sliding, and pivoting. Navigate the shallows, and if you encounter a submerged object, you can jack up your motor and idle over allowing your motor to KickBack and prevent costly damage to the lower unit.Features: Patented design 6″ Setback Locking pins for reverse Grease able pivot points and slide plate area No spring or chains Tension rods 30 deg of tilt Delrin rollers and bearings for smooth operation; No need for chains or spring Motor tether attachment point for safety Locking pins to prevent plate from kicking out in reverse or trailering Grease able pivot points – Automotive zerk fittings Rated up to 150 HP motors – BIA bolt pattern Unit weight: 48 lbs Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty WARNING: This unit is rated for outboard motors up to a maximum of 150 H.P. Do not encounter obstructions at speeds over 5 M.P.H and only in the forward direction. It is not designed or intended to encounter obstructions while the boat is being operated in the reverse direction.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Transom/Engine 5.5" Bolt Kit *Set of 6Bolt Kit for jack plate installation. For motors with 1/2″ hardware requirements. Not for Mini Manual Jack Plate.Contains: 6 x 1/2″ SS Bolts 6-1/2″ Nylok Nuts 12 x Flat Washers 6 x Lock Washers

Read more less

MFD Bow Graph Mount with Tool CaddyFeatures: Black Anodized finish Tool caddy that can be swapped from right to left side

Read more less

8" Setback Action Series Hydraulic Jack Plate - SilverThe hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market. The first Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.The internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate™.Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.Features: Pump inside jack plate Plate weight: 46lbs 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift Large powerful motor that can lift heavy outboards under full power Can be converted to have pump inside boat if owner desires to change styles Automotive grease nipples for easy lubrication Tension rods Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series) Pre drilled for dual side mount Power Pole brackets. Includes Jack plate, wiring harness, relays, rocker style switch Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

4″ Hydraulic Action Series Kick-Back Jac - SilverThe best jack plate available meets the KickBack plate to form the new Hydraulic KickBack Jac! Bob’s jack plate with 6″ hydraulic stroke and 1.5″ built in structure lift offering a total of 7.5″ total lift! Delrin bushing throughout provide long life of smooth sliding, and pivoting. Navigate the shallows, and if you encounter a submerged object, you can jack up your motor and idle over allowing your motor to KickBack and prevent costly damage to the lower unit.Features: Patented design 4″ Setback Locking pins for reverse Grease able pivot points and slide plate area No spring or chains Tension rods 30 deg of tilt Delrin rollers and bearings for smooth operation; No need for chains or spring Motor tether attachment point for safety Locking pins to prevent plate from kicking out in reverse or trailering Grease able pivot points – Automotive zerk fittings Rated up to 150 HP motors – BIA bolt pattern Unit weight: 48 lbs Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty WARNING: This unit is rated for outboard motors up to a maximum of 150 H.P. Do not encounter obstructions at speeds over 5 M.P.H and only in the forward direction. It is not designed or intended to encounter obstructions while the boat is being operated in the reverse direction.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

4" Setback Action Series Hydraulic Jack Plate - SilverThe hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market. The first Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.The internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate™.Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.Features: Pump inside jack plate Plate weight: 46lbs 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift Large powerful motor that can lift heavy outboards under full power Can be converted to have pump inside boat if owner desires to change styles Automotive grease nipples for easy lubrication Tension rods Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series) Pre drilled for dual side mount Power Pole brackets. Includes Jack plate, wiring harness, relays, rocker style switch Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less