MFD Bow Graph MountSpecifications: Black anodized finish Mount

Read more less

Transom/Engine 5" Bolt Kit *Set of 6Bolt Kit for jack plate installation. For motors with 1/2″ hardware requirements. Not for Mini Manual Jack Plate.Contains: 6 x 1/2″ SS Bolts 6-1/2″ Nylok Nuts 12 x Flat Washers 6 x Lock Washers

Read more less

10" Setback Action Series Hydraulic Jack Plate - SilverThe hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market. The first Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.The internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate™.Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.Features: Pump inside jack plate Plate weight: 46lbs 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift Large powerful motor that can lift heavy outboards under full power Can be converted to have pump inside boat if owner desires to change styles Automotive grease nipples for easy lubrication Tension rods Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series) Pre drilled for dual side mount Power Pole brackets. Includes Jack plate, wiring harness, relays, rocker style switch Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Transom/Engine 3.5" Bolt Kit *Set of 6Bolt Kit for jack plate installation. For motors with 1/2″ hardware requirements. Not for Mini Manual Jack Plate.Contains: 6 x 1/2″ SS Bolts 6-1/2″ Nylok Nuts 12 x Flat Washers 6 x Lock Washers

Read more less

4" Setback Action Series Hydraulic Jack Plate - Gloss BlackThe hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market. The first Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.The internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate™.Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.Features: Pump inside jack plate Plate weight: 46lbs 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift Large powerful motor that can lift heavy outboards under full power Can be converted to have pump inside boat if owner desires to change styles Automotive grease nipples for easy lubrication Tension rods Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series) Pre drilled for dual side mount Power Pole brackets. Includes Jack plate, wiring harness, relays, rocker style switch Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Deck Plug - Pedestal Seat Plug 1.77" Hole - BlackFeatures: Bob’s Pedestal Seat plug fills the hole when your seat is not in use Patent pending water tight system! O-ring sealed to keep water out of your dry boxes! Fits all 0.75″ holes 6061 Aircraft grade aluminum

Read more less

Transom/Engine 6" Bolt Kit *Set of 6Bolt Kit for jack plate installation. For motors with 1/2″ hardware requirements. Not for Mini Manual Jack Plate.Contains: 6 x 1/2″ SS Bolts 6-1/2″ Nylok Nuts 12 x Flat Washers 6 x Lock Washers

Read more less

Prop Dock Kit with WrenchNow you can mount your prop securely in your boat with our patent pending BSA Prop Dock! No more having your expensive prop loose in your compartments, or taking up tons of room with large cases. Mounts securely to the floor with included hardware. The top block that holes prop in place doubles as a prop removal block that slides over your cavitation plate to hold in place if you have to do a prop change on the water/beach.

Read more less

Transom/Engine 8" Bolt Kit *Set of 6Bolt Kit for jack plate installation. For motors with 1/2″ hardware requirements. Not for Mini Manual Jack Plate.Contains: 6 x 1/2″ SS Bolts 6-1/2″ Nylok Nuts 12 x Flat Washers 6 x Lock Washers

Read more less

Stainless Steel Quick-Release Hose Deck Mount Fitting & Hose AdapterStainless Steel Deck Mount Fitting, 1/2" NPT Female Inlet, 3/4" GHT Male Hose Adapter.The Quick Release Connector provides the perfect installation solution for your HoseCoil washdown or garden style hose. The Quick Release installs easily on your boat and allows you to stow your hose out of the way. Never trip on a hose again! This clever design will allow you to flush mount the Quick Release into your cockpit or bulkhead.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Tools & Accessories Box Dimensions: 4"H x 8"W x 8"L WT: 1.4 lbs UPC: 671880550239 Brochure (pdf)

Read more less

12" Setback Action Series Hydraulic Jack Plate - Gloss BlackThe hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market. The first Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.The internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate™.Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.Features: Pump inside jack plate Plate weight: 46lbs 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift Large powerful motor that can lift heavy outboards under full power Can be converted to have pump inside boat if owner desires to change styles Automotive grease nipples for easy lubrication Tension rods Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series) Pre drilled for dual side mount Power Pole brackets. Includes Jack plate, wiring harness, relays, rocker style switch Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

16" Setback Action Series Hydraulic Jack Plate - Gloss BlackThe hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market. The first Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.The internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate™.Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.Features: Pump inside jack plate Plate weight: 46lbs 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift Large powerful motor that can lift heavy outboards under full power Can be converted to have pump inside boat if owner desires to change styles Automotive grease nipples for easy lubrication Tension rods Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series) Pre drilled for dual side mount Power Pole brackets. Includes Jack plate, wiring harness, relays, rocker style switch Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

14" Setback Action Series Hydraulic Jack Plate - SilverThe hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market. The first Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.The internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate™.Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.Features: Pump inside jack plate Plate weight: 46lbs 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift Large powerful motor that can lift heavy outboards under full power Can be converted to have pump inside boat if owner desires to change styles Automotive grease nipples for easy lubrication Tension rods Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series) Pre drilled for dual side mount Power Pole brackets. Includes Jack plate, wiring harness, relays, rocker style switch Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

8" Setback Action Series Hydraulic Jack Plate - Gloss BlackThe hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market. The first Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.The internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate™.Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.Features: Pump inside jack plate Plate weight: 46lbs 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift Large powerful motor that can lift heavy outboards under full power Can be converted to have pump inside boat if owner desires to change styles Automotive grease nipples for easy lubrication Tension rods Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series) Pre drilled for dual side mount Power Pole brackets. Includes Jack plate, wiring harness, relays, rocker style switch Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Action Series Tilt & Trim for Clamp on Motors - Silver - 30HPThe Action series Tilt and Trim, all in one unit!  Easy rigging and tons of benefits!For outboard owners without factory tilt and trim, Bob’s Machine Shop has a solution. Designed for motors up to 30hp(clamp on style only), BMS’s hydraulic Tilt & Trim can provide increased performance, better handling and less hassle raising and lowering the motor at the launch ramp.The Tilt & Trim allows boat operators to trim the boat for a smoother, drier ride. When fully trimmed in, it provides a negative 3-degree tuck-under angle for faster starts and quicker on-plane times. After reaching plane, the boat can be optimized for best running angle by trimming the tilt up to its maximum of 65 degrees. A 5-1/2 inch setback is standard.Features: The hydraulically operated Tilt & Trim will accommodate clamp-on motors, not standard BIA bolt pattern style. The Over all mounting dimensions, which are: 10″ wide by 11.5″ length Tilt & Trim is easy to install. It comes with wiring harness, control switch and carries a limited lifetime structural warranty.  Stackable spacers for the clamps included standard! Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty

Read more less

10" Setback Action Series Hydraulic Jack Plate - Gloss BlackThe hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market. The first Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.The internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate™.Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.Features: Pump inside jack plate Plate weight: 46lbs 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift Large powerful motor that can lift heavy outboards under full power Can be converted to have pump inside boat if owner desires to change styles Automotive grease nipples for easy lubrication Tension rods Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series) Pre drilled for dual side mount Power Pole brackets. Includes Jack plate, wiring harness, relays, rocker style switch Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

14" Setback Action Series Hydraulic Jack Plate - Gloss BlackThe hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market. The first Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.The internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate™.Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.Features: Pump inside jack plate Plate weight: 46lbs 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift Large powerful motor that can lift heavy outboards under full power Can be converted to have pump inside boat if owner desires to change styles Automotive grease nipples for easy lubrication Tension rods Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series) Pre drilled for dual side mount Power Pole brackets. Includes Jack plate, wiring harness, relays, rocker style switch Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

12" Setback Action Series Hydraulic Jack Plate - SilverThe hydraulic jack plate line, “Action Series Jack Plate™”, offers new technology in the Jack Plate market. The first Jack plate to offer a pump inside the jack plate structure, saving boaters room inside the boat, and eliminating the need to mount a pump inside the boat.  This is a great OEM feature to help save time in rigging.The internal pump has a motor stronger than any other internal jack plate on the market currently, which will offer greater lifting speed, and strength with heavy outboards.  All of the Bob’s patented features from our standard series, automotive style grease nipples in the side rails, tension rods, and the famous Bob’s Machine Shop Design, are all incorporated into the Action Series Jack Plate™.Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback.Action series support motors up to a 14.5″ mounting width.  If wider we recommend our Extreme Gen 3 series jack plates.Features: Pump inside jack plate Plate weight: 46lbs 1.5″ of lift built into structure & 6″ of adjustable travel for a total of 7.5″ total lift Large powerful motor that can lift heavy outboards under full power Can be converted to have pump inside boat if owner desires to change styles Automotive grease nipples for easy lubrication Tension rods Rated for 300HP, up to 625 lbs motors (heavier should use Extreme series) Pre drilled for dual side mount Power Pole brackets. Includes Jack plate, wiring harness, relays, rocker style switch Limited Lifetime Structure Warranty against manufacturing defects 3 Year Action Pump Warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Ceramic Top - 50mlWhy use Gtechniq Marine Ceramic Top?Ceramic Top offers unparalleled dirt-repellency, gloss, and surface slickness.It has an exceptionally strong anti-static function that helps to keep surfaces dust-free, and also contains a strong UV filter to help prevent premature fading.Ceramic Top uses a permanent chemical bond to either bond directly to your boat’s gelcoat or topcoat, or a previously installed layer of Ceramic Base.Features: Offers unparalleled dirt-repellency, gloss, and surface slickness Strong anti-static function keeps the surface dust-free Strong UV filter prevents premature fading Simple steps to help you get the best results: If applying directly to gelcoat or topcoat, polish the surface to remove any imperfections. Ceramic Top bonds best to surgically clean surfaces. Use Gtechniq Panel Wipe and a Gtechniq MF1 Microfibre to remove all polish residue. Soak the application pad with product. Spread onto an area measuring no more than 2’ by 2’ (60 x 60cm) and remove residue with a Gtechniq MF1 Microfibre. Product usage – The amount of product you will need will vary depending on factors such as the micro porosity of either your gel coat or marine topcoat. The requirement will be anywhere between 5.5 to 7ml/square meter (0.5 to 0.7 ml/square foot). Specifications: Type: Ceramic Coating Box Dimensions: 2"H x 2"W x 4"L WT: 0.2 lbs UPC: 5060147722031

Read more less

MF2 Zero Scratch Microfiber Drying TowelWhy use a Gtechniq Marine MF2 Zero Scratch Microfiber Drying Towel?The Gtechniq MF2 Zero Scratch Microfiber Drying Towel is designed to be as kind to paint as possible and absorb enough water to dry even the largest car.Any professional detailer will confirm that the number one cause of gloss drop-off on paintwork is poor wash technique. With this towel, you can be sure that the drying process is optimised and marring is minimised.Features: Generous 60x90cm High absorbency Helps minimise marring Specifications:Weight: 450 gsmSimple steps to help you get the best results: Make sure the towel is free from contaminants Always dry with a light touch Wash after each use at no more than 40°C using a non-biological detergent. Avoid bleach-based products and fabric softeners Dry naturally, or on a low tumble dry setting Store in a dust-free environment Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 8"W x 11"L WT: 0.4 lbs

Read more less

ATLAS™ 10" Set Back Hydraulic Jack Plate PolishedRated for engines up to 300hp or up to 625 pounds dry weight. 5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE ATLAS™ is truly the best hydraulic jack plate in the world ATLAS™ is factory installed by more boat manufacturers than any other plate ATLAS™ is used by more professional fisherman than any other hydraulic jack plate ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China 6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure ATLAS™ was the first plate to offer a very simple actuator replacement in the field ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Force™ Trolling Motor SkegProtect your motor and blade from impact by placing a standard skeg on your Force™ trolling motor. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Prop Wrench Set - Fits 17/32" to 1-1/4" Prop NutsMultiple socket sizes for all prop maintenance. Offers multiple sockets to fit from 17/32" to 1-1/4", allowing consumers to service multiple props Built of durable plastic WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Material: Plastic Box Dimensions: 2"H x 6"W x 16"L WT: 1.02 lbs UPC: 022697137074

Read more less

85mm (3-3/8") VMH-35 Multifunction GaugeThe Veratron VMH 35 is engineered for single inboard or outboard engine applications. The Veratron VMH 35 has an embedded NMEA 2000 gateway that distributes sensor data inputs such as fuel, trim, and tachometer to other devices like chartplotters.  This saves the need for an additional external converter.  Highly adaptable to a wide range of onboard networks, it's equipped with analog inputs, making it ideal for refitting with older engines.An integrated GPS makes the VMH 35 the perfect standalone navigation solution.  It integrates speed, compass, and position into the engine data information.  A dedicated Veratron IBS (Intelligent Battery System) input can provide critical 12V battery monitoring capabilities.The Veratron VMH 35 has a mineral glass front that's optically bonded to the sun-readable hybrid display.  A sleek, brushed stainless steel bezel surrounds the device and fits into classic and modern marine décors.  Because small boat consoles are often fully exposed, the round display is waterproof to IPX7 criteria, both front and back.  It fits a standard 3-3/8" panel cutout size.Features: Integrated high-performance GNSS receiver Integrated Analog to NMEA 2000 Gateway Waterproof to IPX7 Stylish black-glass design with brushed stainless-steel ring New generation sun-readable color hybrid display Intelligent Battery Sensor (IBS) port NMEA 2000® certified In the Box: VMH35 Gauge Mounting Spinlock Wire harness  Safety Instructions  *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Box Set: No Gauge Size: 3-3/8" Gauge Type: Multifunction Series: VMH-35 Box Dimensions: 4"H x 6"W x 6"L WT: 0.75 lbs UPC: 7640178729773 Owner's Manual (pdf)Brochure (pdf)

Read more less

40" x 80" 5mm Full Sheet - Wood Grain Laser Pattern - Mocha (1016mm x 2032mm x 5mm)The SeaDek Full Sheet is perfect for DIY boat flooring projects. This sheet has a wood grain laser pattern, a modern brushed texture, and non-skid qualities for optimal comfort.Specifications: Color: Mocha Dimensions: 40″ x 80″ (1016mm x 2032mm) Material Thickness: 5mm Pattern: Laser  Texture: Brushed

Read more less

Swivl-Eze Lock'N-Pin 3/4" Pin Seat Mount - Zinc CoatedSpecifications: Zinc-plated Tilt: 3 degrees Pin (inch): 2-3/4" Steel Pin with Spring ABYC Code: B (not to be used at the helm/driver position) Installed Height (inch): 2" #1 supplier of 3/4" pin seating hardware. Here's why: The 3/4" system gives you outstanding economical performance The design is proven by decades of experience The Difference: The patented Lock'N-Pin system leads the industry in safety Lock'N-Pin prevents unintentional detachment for seat mounts, posts, and bases Lock'N-Pin products exceed ABYC Standard H31.6.1 Not recommended to interchange with other manufacturers' products Quick Guide (pdf)

Read more less

2-Way Boat Alarm SystemProtects your boat and valuable equipment from theft.Features: Shock Sensor Detects Intruders Alerts you up to 3000 Yards when Activated Two Way Remote Alerts with Sound, Light & Vibration Up to 3000 Yards Response and 1000 Yards Transmit 128 db Alarm Horn Waterproof Main Engine Shock Sensor with Sensitivity Adjustment Easy Installation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Sensors Included: 2 Sensor Quantity - Max: 2 Box Dimensions: 2"H x 8"W x 8"L WT: 0.8 lbs UPC: 733572073454

Read more less

Racktech™ - 2.0 High Efficiency Rack & Pinion System Kit - 17' CableThe Racktech Rack and Pinion steering package offers a compact installation and features the TM87O cable with an armor-wrapped stainless steel core for maximum efficiency and minimal lost motion.Ideal for boats with minimal clearance behind the dash, the Racktech is recommended for power-assisted sterndrives and other applications with minimal rudder torque.Includes: G87 Helm X34 Bezel  Tm870 preassembled Rack 17' Cable

Read more less

Racktech™ - 2.0 High Efficiency Rack & Pinion System Kit - 20' CableThe Racktech Rack and Pinion steering package offers a compact installation and features the TM87O cable with an armor-wrapped stainless steel core for maximum efficiency and minimal lost motion.Ideal for boats with minimal clearance behind the dash, the Racktech is recommended for power-assisted sterndrives and other applications with minimal rudder torque.Includes: G87 Helm X34 Bezel  Tm870 preassembled Rack 20' Cable

Read more less

MACH™ Series High Efficiency & Flexibility Engine Control Cable - 33C Universal Style  - 32'MACHZero - Universal style (like C2, C8)MACHZero: 87 mm (3.4”) For use with inboard, sterndrive and outboard engines. Ideal for high performance applications, long cable runs and complex routings. Blue color jacket designed for high performance applications.For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement. Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required. Mach Series cables also feature solid stainless steel output fittings.The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables. The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.Features: Suitable for outboard – inboard and sterndrive engines High efficiency for smooth operation High flexibility for reduced bend radius Ideal for long complex cable routing Maintenance free Stainless steel cables end fittings Blue outer jacket resists against abrasion, UV and chemicals

Read more less

Stow N' Go 160 Gas Grill with Thermometer and Ignitor Kuuma grills are designed for use on boats and built to withstand harsh marine environments, but are also perfect for RVing, tailgating and patio or deck grilling.  The Stow N' Go 160 is easy to transport and can be mounted to any Kuuma rail, rod or pedestal mount for use on your boat (sold separately). It is compatible with 1 lb. throwaway propane cylinders.  This high quality lightweight 304 stainless-steel barbecue increases flavor while minimizing flare-ups.  It has a large cooking area of 160 square inches, and the stainless-steel burner heats up fast, is easy to clean, and resists rust.  The integrating folding legs are perfect for tabletop use and the grill is quick and easy to assemble. This version comes built with a thermometer, and igniter for convenience out at the campsite, or on the road. Its compact design is great for storage after use. Features: Ready to use, no assembly required  Equipped with thermometer and ignitor Folding legs  Mounting bracket  Removable grease tray for easy cleaning Technical Specifications: Material - 304 Stainless Steel Total Cooking Area - 160" Sq. In.  Number of Burners - 1 Burner BTU - 13,000 Dimensions (with regulator) (L x D x H) - 23.25" x 11.25" x 11"  Weight 16 lbs Fuel Type - Propane *Sold as an IndividualWARNING: This product can expose you to chemicals including CARBON MONOXIDE which is known to the State of California to cause birth defects, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

ROTECH™ STEERING SYSTEMROTECH - X11T71FC - helm X34 - 90° bezel M66 - 11' steering cable UFLEX ROTARY STEERING SYSTEMS PACKAGED IN A BOX: A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable.FEATURES AND TECHNICAL SPECIFICATIONS: Fast connect, simple installation All stainless steel cable output ends Corrosion resistant materials Particulary suitable where clearance is limited Standard 3/4" tapered shaft Lock-to-lock steering wheel turns: approx. 3,8 Stroke: 9" (228 mm) Maximum allowable steering wheel diameter: 16" (406 mm) Minimum steering cable bend radius: 7.9" (200 mm) Minimal feedback Compact for mounting T71FC steering system is not to be used on boats quipped with engines that exceed the maximum horsepower rating of the boat For boats faster than 50 mph the twin cable steering system T72FC is recommended Exceeds EN 28848 safety standards Exceeds ABYC P17 safety standards **The wheel is not included Specifications: Cable Length (Feet): 11' Box Dimensions: 2"H x 5"W x 5"L WT: 26.5 lbs UPC: 702755019435

Read more less

M66 Fast Connect Rotary Steering CableSteering Helm: Ultraflex T71FC T72FC - T73NR FC T81FC - T82FC T83NR FC Teleflex Safe TQC/NFB Morse D290Ultraflex year 2001 and prior: T71 - T72 - T73NR T74NR - T81 - T82 T83NR - T84NR Length: 11 Feet Specifications: Cable Length (Feet): 11' Box Dimensions: 3"H x 18"W x 23"L WT: 6.4 lbs UPC: 702755017097

Read more less

Primer-209 D Black 250ml BottlePigmented, solvent-based primer for paints and plastics. Sika® Primer-209 D is a solvent-based black primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives. Sika® Primer-209 D is specifically formulated for the treatment of bond faces prior to the application of Sika’s 1-component Polyurethanes. This primer might provide excellent adhesion without previous activation steps on certain plastic substrates.  Areas of Application:Sika® Primer-209 D is used to improve adhesion on many plastics and paints such as GRP, epoxy resins, PVC, ABS, PMMA, PC, PS and acrylics, alkyds/melamine, powder coatings, and baking varnishes.Due to the wide variety of plastics, it is mandatory to perform preliminary tests on original substrates under production conditions.Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-209 D on materials prone to stress cracking.This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility. Owner's Manual (pdf)

Read more less

Universal Kit 4" Aux Offset 29"-33" Steering SystemEZ-Steer Universal Auxiliary Outboard Steering System: Take Control of Your Boating ExperienceDiscover the next evolution in auxiliary outboard steering with the EZ-Steer Universal system. Designed to simplify your boating experience, the EZ-Steer Universal Kit consolidates over 1000 SKU combinations into a streamlined, easy-to-choose product line. Available in three versatile auxiliary offsets—3″, 4″, and 7″—and covering a range of center-to-center distances, this system ensures compatibility with nearly every outboard and sterndrive application. Whether you’re trolling, docking, or simply cruising, this system maintains an unrestricted forward view, giving you full control and peace of mind.Top Features of EZ-Steer Universal: Integrated Steering: Control the auxiliary engine from the main wheel for added safety and convenience Uninterrupted Operation: Stay connected during main power runs with clear forward visibility Improved Efficiency: Save fuel and reduce maintenance with an optimized main/kicker combo The EZ-Steer Universal Kit allows you to steer your auxiliary engine directly from your boat’s main wheel, providing you with a safer and more convenient boating experience. Simplified Selection: Choose from three auxiliary offsets (3″, 4″, 7″) and varying rod lengths for a perfect fit Easy Installation: Includes all necessary hardware for quick, hassle-free setup Complete Kit: Comes with everything needed, backed by a one-year limited warranty By offering a single, adaptable solution, the EZ-Steer Universal revolutionizes auxiliary steering, providing a robust, user-friendly system that stands out in the marketplace.Steer with Ease & ConfidenceThe EZ-Steer Universal Auxiliary Outboard Steering System revolutionizes auxiliary steering by offering a universally compatible, easy-to-install solution.Why Choose EZ-Steer? Safety and confidence Better economy, better performance Simplified selection Quick installation Quick Guide (pdf)

Read more less

Universal Kit 3" Aux Offset 29"-33" Steering SystemEZ-Steer Universal Auxiliary Outboard Steering System: Take Control of Your Boating ExperienceDiscover the next evolution in auxiliary outboard steering with the EZ-Steer Universal system. Designed to simplify your boating experience, the EZ-Steer Universal Kit consolidates over 1000 SKU combinations into a streamlined, easy-to-choose product line. Available in three versatile auxiliary offsets—3″, 4″, and 7″—and covering a range of center-to-center distances, this system ensures compatibility with nearly every outboard and sterndrive application. Whether you’re trolling, docking, or simply cruising, this system maintains an unrestricted forward view, giving you full control and peace of mind.Top Features of EZ-Steer Universal: Integrated Steering: Control the auxiliary engine from the main wheel for added safety and convenience Uninterrupted Operation: Stay connected during main power runs with clear forward visibility Improved Efficiency: Save fuel and reduce maintenance with an optimized main/kicker combo The EZ-Steer Universal Kit allows you to steer your auxiliary engine directly from your boat’s main wheel, providing you with a safer and more convenient boating experience. Simplified Selection: Choose from three auxiliary offsets (3″, 4″, 7″) and varying rod lengths for a perfect fit Easy Installation: Includes all necessary hardware for quick, hassle-free setup Complete Kit: Comes with everything needed, backed by a one-year limited warranty By offering a single, adaptable solution, the EZ-Steer Universal revolutionizes auxiliary steering, providing a robust, user-friendly system that stands out in the marketplace.Steer with Ease & ConfidenceThe EZ-Steer Universal Auxiliary Outboard Steering System revolutionizes auxiliary steering by offering a universally compatible, easy-to-install solution.Why Choose EZ-Steer? Safety and confidence Better economy, better performance Simplified selection Quick installation Quick Guide (pdf)

Read more less

Replacement Propeller for Left Handed BTQ 185-55, BTQ 185-75 & BTQ 185-95 Bow ThrusterThis replacement propeller is for Quick BTQ 185-55, BTQ 185-75 & BTQ 185-95 Bow Thruster. Please note that this propeller is a left-hand propeller.Features:5 propeller blade*Please note that an anode is not included.

Read more less

Propeller for D185 RH for Bow ThrusterQuick Propeller for D185 RH for Bow Thruster.*Anode Not Included

Read more less

Magnesium Anode 200mm for Water HeaterQuick OSP Boiler Magnesium Anode 200mm.Features:  Magnesium Anode 200mm Used with water heaters

Read more less

Thruster Cable - 6MThe Quick TCDEX is a control extension cable used on the Quick BTQ bow thruster series to connect the bow or stern thruster system to the TCD remote panel control system.

Read more less

CFX5 25 Ice-Free 25L Electric Cooler - BlackThe most compact and portable CFX5 25L ice-free electric cooler holds 40 cans and can be conveniently stored in the back of your SUV or fit in the back seat – great for day trips, duos, or solo adventures. Highly efficient Vacuum Insulated Panels deliver outstanding insulation, the lid seals tightly, and the compressor takes you down to -7°F. Control it with our smartphone app and stay adventure-ready.Features: The 25L capacity holds up to 40 x 12 oz cans – a compact size for up to three people’s weekend adventures and long solo trips. Temperature range of -7°F (-22C) to 68°F (20C); uses less power than a 60W light bulb. Track energy consumption and monitor temperature with the cooler’s Bluetooth smartphone app; be alerted when the lid is left open, monitor history, and connect multiple devices at once. Optimized ratio of exterior to interior proportions provides maximum compressor efficiency, while the extended evaporator on inner walls ensures an even distribution of cold air. Powered by AC (110-240V), DC (12/24V) – or go off-grid with Dometic™ batteries and Obsidian solar panels. 3-stage dynamic battery protection system actively monitors inbound power and prevents draining a vehicle battery or allows deep draw on dual batteries. Internal details include a removable wire divider and an interior light. External details include self-folding aluminum alloy handles, a removable, textured nonslip lid, TPE gaskets to ensure a tight lid seal, and an integrated bottle opener. Specifications: Scope of delivery - 1 cooler, 1 manual, 1 warranty card, 1 Connection cable for 12/24V connection, 1 Connection cable for 100-240V connection, removable wire baskets, bottle opener Single or Dual Zone - Single Advanced Materials and Design in an Ice-Free 25L Electric Cooler Refrigeration technology - Compressor Warranty - 5 Year Limited Technical Specifications: Product Dimensions - 22.4" (D) x 16.54" (H) x 13.46" (W) Product Weight - 29.77lbs Input Voltage (AC) - 100-240V AC Input Voltage (DC) - 12-24V Rated Input Current (AC) - 0.85A at 100V, 0.36A at 240V Rated Input Current (DC) - 3.2A at 24V, 7.2A at 12V Rated Input Power - 45W Input Frequency - 50/60Hz Refrigerant Type - R1234YF Specifications: Color: Black Box Dimensions: 15"H x 19"W x 24"L WT: 34.4 lbs UPC: 034223507534 Owner's Manual (pdf)

Read more less

Protective Cover for CFX3 & CFX5 55/55IM Electric CoolersThe Dometic™ CFX3 PC55IM protective cover is designed to protect your CFX3 from damage on even the most rugged adventures. The CFX3 PC55 is made from durable thermoformed EVA foam and 1200D nylon to protect against dirt, dust, and scuff damage. Roam free from worry with a CFX3 PC55.Features: Custom-fit to CFX5 55/55IM (also fits CFX3 55/55IM) Built with EVA foam and 1200D nylon for rugged protection Cutout for built-in bottle opener and user interface Zippered front + side pockets keep cords and tools in reach Designed to prevent overheating for peak performance

Read more less

Protective Cover for CFX3 & CFX5 45 Electric CoolersThe Dometic™ CFX3 PC45 protective cover is designed to protect your CFX3 from damage on even the most rugged adventures. The CFX3 PC45 is made from durable thermoformed EVA foam and 1200D nylon to protect against dirt, dust, and scuff damage. Roam free from worry with a CFX3 PC45.Features: Custom-fit to CFX5 45 (also fits CFX3 45) Built with EVA foam and 1200D nylon for rugged protection Cutout for built-in bottle opener and user interface Zippered front + side pockets keep cords and tools in reach Designed to prevent overheating for peak performance

Read more less

Hustler® - Right Hand - Aluminum Propeller - LE-1421-4 - 4-Blade - 14" x 21 PitchThe Prop that put the "four" in Perfourmance! Turning Point's Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced an aluminum propeller with two different blade shapes (they call it Dual Geometry) for 90-300+hp applications. This prop is uniquely engineered with two blade geometries: (diagram label 2)two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and (diagram label 1) two blades utilize an offshore style design for high speed and maximum stern lift.These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers.The Hustler 4 blade series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older aluminum designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.Squeeze Cast for Added StrengthStainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.Long Lasting Ultracoat™ Powder Coated FinishExclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pitch: 21 Material: Aluminum Diameter (Inches): 14" Rotation: Right Box Dimensions: 7"H x 15"W x 15"L WT: 7 lbs UPC: 652480200687 Quick Guide (pdf)Brochure (pdf)

Read more less

Hustler® - Right Hand - Aluminum Propeller - LE1/LE2-1315- 3-Blade - 13.75" x 15 PitchTurning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. Four blade props accelerate faster, exhibit stern lift, handle rough or following seas better, and maintain speed better as you load the boat down with gear or people. Three blade props run better on pontoons, while four blades and three blades both run well on tri-toons (recent testing has shown that pontoons and tri-toons run better with larger blade diameters than runabout or bass boat hulls).Squeeze Cast for Added StrengthStainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.Long Lasting Ultracoat™ Powder Coated FinishExclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 13-3/4" Material: Aluminum Pitch: 15 Rotation: Right Box Dimensions: 7"H x 14"W x 14"L WT: 6.2 lbs UPC: 652480102288 Quick Guide (pdf)Brochure (pdf)

Read more less

Hustler® - Right Hand - Aluminum Propeller - H1-1013 - 3-Blade - 10.5" x 13 PitchTurning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.Squeeze Cast for Added StrengthStainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.Long Lasting Ultracoat™ Powder Coated FinishExclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.  WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 10-1/2" Material: Aluminum Pitch: 13 Rotation: Right Box Dimensions: 6"H x 13"W x 13"L WT: 3.95 lbs UPC: 652480100741 Quick Guide (pdf)Brochure (pdf)

Read more less

Hustler® - Right Hand - Aluminum Propeller - LE1/LE2-1317- 3-Blade - 13.25" x 17 PitchTurning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. Four blade props accelerate faster, exhibit stern lift, handle rough or following seas better, and maintain speed better as you load the boat down with gear or people. Three blade props run better on pontoons, while four blades and three blades both run well on tri-toons (recent testing has shown that pontoons and tri-toons run better with larger blade diameters than runabout or bass boat hulls).Squeeze Cast for Added StrengthStainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.Long Lasting Ultracoat™ Powder Coated FinishExclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 13-1/4" Material: Aluminum Pitch: 17 Rotation: Right Box Dimensions: 7"H x 14"W x 14"L WT: 6 lbs UPC: 652480102295 Quick Guide (pdf)Brochure (pdf)

Read more less

Cockpit Coaming Bolster Set (2) - 4" x 39" & 20mm Thick - Black with Brushed TextureSeaDek Coaming Bolsters are a great alternative to traditional upholstered bolsters. Durable and easy to install, these bolsters will provide years of trouble-free service thanks to their closed-cell PE/EVA foam construction and robust pressure-sensitive adhesive. Each set contains two 4” x 39” bolsters that are 20mm thick.Specifications: Dimensions: 4″ x 39″ Material Thickness: 20mm Texture: Brushed Color: Black Set of Two (2) *Two coaming bolsters are included in this set

Read more less