Horizontal Round Rail Mount with Knob - 1-1/2"Magma's horizontal round rail mount with the knob replacement part.Specifications: Mount: 1-1/2" Weight: 0.93lbs/0.43kg Exterior Construction Materials: 18-8 Stainless Steel and 356 Anodized Aluminum Warranty: 1 Year

Read more less

Piezo Igniter and Ceramic Electrode with Wire & Fasteners Replacement igniter and electrode.Compatible with: A10-207 A10-217 A10-918  A10-918L A10-918LS  A10-1218L  A10-1218LS A10-1225L  A10-1225LS  *Sold as an Individual 

Read more less

LifeSeal® Sealant Cartridge - BlackA unique combination of marine silicone and polyurethane, formulated especially for fiberglass. LifeSeal® offers a fast-curing, low odor, high adhesion, non-sagging, non-corrosive, non-yellowing formula. It provides a durable permanent watertight seal for joints subject to structural movement. May be used above and below the waterline. Use for sealing decks to hulls, thru-hull fittings, vinyl ports, sealing/glazing windshields and bedding marine hardware. Will adhere to metal, glass, wood, Lexan®, ABS® and certain other materials. Can be removed without damaging gel-coat. Not recommended for ferro cement hulls, impregnated wood or oil-soaked materials. Cures in presence of water. Mildew resistant and acid free.

Read more less

Gen 3 Standard Starlink Antenna Mount Top Plate - Fits Mounts Ending in M1 & M2The Seaview modular top plate ADAG3 for the Gen 3 Standard Starlink Antenna (and sometimes the Gen 4/Standard) is specifically engineered for the demanding marine environment. This top plate fits any Seaview modular pedestal mount ending in M1 or M2. The design incorporates a slight angle to the Starlink antenna to facilitate moisture runoff.The aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.This plate also has a waterproof grommet in the center for cable routing.The Gen 3 Standard Starlink Antenna (sometimes Gen 4/Standard) now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, when mounting to a vehicle or other fast moving vessel, it necessitates additional support. Opting for the Seaview ADAG3 modular top plate is a superior choice, offering a very secure and easily assembled mounting solution.

Read more less

12.5" Dual Mount for Most Radar Domes - Top for Sat Domes - Top Plate RequiredInstall your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management.Compact DesignSpecifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.Eliminate InterferenceA Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation.UniversalThe lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.Modular Top PlateThe top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. *Top Plate Sold Separately* Specifications: Type: Dual Mount Height: 12.5" Box Dimensions: 14"H x 18"W x 36"L WT: 23 lbs UPC: 839662009027 Quick Guide (pdf)

Read more less

1-1/4" Light Bar for Closed Dome Radar - Requires LTB TopSeaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance. Many StylesThere are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.Extra Height ClearanceOn select Seaview light bar models some can fold over 90° to allow for extra height clearance. Simply loosen the four bolts around the stainless steel clamp and fold over in either direction.Easy InstallationSecured with a stainless steel clamp, simply use the supplied four bolts   Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 13"W x 31"L WT: 3.5 lbs UPC: 839662009188 Quick Guide (pdf)

Read more less

Velcro Waffle Ultra-Fine Polishing Foam Pad for Rotary Polishers 180mm - WhiteThe WAFFLE ULTRA-FINE FOAM PAD is designed to remove fine imperfections and create an unbelievably high gloss finish. The waffle pad face, perfect against the stress caused by rotary motion, offers great stability when correcting paint defects or removing haze left by previous, heavier polishing phases. These pads are designed to work with the BigFoot LH19E and any other rotary polisher. We recommend pairing them with our UNO Pure Compound.The waffle design of the pad surface generates a smooth polishing experience and increases user comfort. Since the waffle-shaped face of these pads does not totally touch the surface, they work at a cooler level, reducing the risk of overheating the paint. Specifications: Type: Buffers & pads Box Dimensions: 1"H x 6"W x 6"L WT: 0.05 lbs UPC: 8059519685064 Quick Guide (pdf)

Read more less

Reveal Lite-Residue Remover - 750mlREVEAL LITE is a surface preparation and cleaning spray specifically formulated to remove compound and polish oils, residues, waxes, non-durable fillers, and other surface contamination remaining on surfaces before or after correction. It also works great as an exterior glass cleaner.Tips for Success: REVEAL LITE, spray generously onto the surface to be cleaned (if the surface is freshly painted, spray onto a towel, then wipe, do not spray directly on the surface). Wipe immediately with a clean, soft, microfiber polishing cloth until dry. Inspect surface and repeat treatment as necessary. Specifications: Type: All Purpose Box Dimensions: 3"H x 3"W x 8"L WT: 1.6 lbs UPC: 8059519685637 Quick Guide (pdf)

Read more less

Dual Battery Charger for iBrid HLR15 & HLR21 Batteries with LED IndicatorsThe 9.HC180LT Battery Charger is custom-designed to fit the iBrid Mini’s unique battery pack system. The charging station indicates charge status using integrated LED lights and provides a 100% charge from zero to full in approximately 35 minutes.*Batteries NOT Included Specifications: Type: Battery & Electrical Box Dimensions: 4"H x 8"W x 9"L WT: 2.6 lbs UPC: 850056581165

Read more less

D-A Precision Pro Polishing Backing Pads 150mm 6"These revolutionary backing pads have been meticulously designed to take your polishing experience to the next level.Without polyurethane, they not only bring durability to the forefront but also provide a lower center of gravity. This means enhanced stability during operation, allowing for greater control and precision in your work.The rubber edge adds an extra layer of finesse to your polishing tasks, ensuring that even the most delicate surfaces are treated with care. What truly sets our backing pads apart is their ability to guarantee better balancing, even with different polishing pads.This means you can effortlessly switch between various pads without compromising on performance or quality.LOWER CENTER OF GRAVITYFor superior stability and controlRUBBER BORDER PROTECTIONFor added surface protection and a smoother glideBALANCING VERSATILITYPerfect balance with various polishing pads Specifications: Type: Buffers & pads Box Dimensions: 1"H x 6"W x 6"L WT: 0.2 lbs

Read more less

Solve - 20oz Aerosol CanSEM Solve is a virgin solvent blend to clean panels before refinish or repair.Features: Effectively removes adhesive residue, wax, grease, road tar, oil, silicone, paint overspray, and bug remnants Easy to use Leaves no residue Applications: Bare metal Primed or painted surfaces SMC and plastic - limit exposure Properties: Available in gallon, aerosol, quart, or 5-gallon containers Clear Ready to use

Read more less

Hydraulic Hose Kit 6' - Two Hoses with Bulkhead FittingsTwo high-pressure flexible hoses with pre-crimped nickel-plated fittings, bulkhead fittings (for KIT OB-BHBR only), and bend restrictors on one end. Application:Recommended for use with all Uflex helms with 1500 psi relief valvesSpecification:Hose Length (feet): 6’  Specifications: Cable Length (Feet): 6' Box Dimensions: 5"H x 14"W x 15"L WT: 2.55 lbs UPC: 702755025054

Read more less

M90 Mach Black Rotary Steering Cable - 18'Uflex M90 Mach Rotary Steering Cable provides boat steering systems with increased flexibility and durability from top-quality materials and construction. M90 Mach cables use a patented design offering high efficiency and performance in mechanical steering systems.Features: Minimal feedback Fast connections for simple installation Ideal for long cable runs and tight bend applications - Minimum steering cable bend radius: 150 mm (5.9") Stainless steel cable output end featuring patented gasket (engine side) Specifications: Cable Length (Feet): 18' Box Dimensions: 3"H x 17"W x 28"L WT: 9.2 lbs UPC: 702755052067

Read more less

4MP HD-TVI Mini IR Turret with 2.9mm Lens - GreyMonitor your property with the miniature dark-gray aluminum 4MP Outdoor HD-TVI Mini-Turret Camera with Night Vision from Speco Technologies. Featuring a 4MP CMOS sensor and a 2.9mm fixed lens, this camera transmits video at resolutions up to 2560 x 1440 at 15 fps. The camera is equipped with IR LEDs for up to 35' of night vision, enabling you to capture video in even total darkness.Designed for outdoor use, the camera is housed in an IP66-rated weather-resistant enclosure. The UTC (Up-the-Coax) connection allows for OSD control of the camera.Features: Up to 2560 x 1440 resolution video at 15 fps over coax 12 built-in IR LEDs for up to 35' of night vision Signal distance up to 1600' Progressive scanning system Automatic gain control Automatic white balance Internal synchronization Runs on 12 VDC (power supply available separately) Vandal-resistant cast aluminum enclosure IP66 rated for outdoor use FCC and RoHS certified Miniature form factor, suitable for use in vehicles

Read more less

Mercury Verado 350 Zinc Anode KitSpecifications: Material: Zinc For Mercury Verado Specifications: Material: Zinc Box Dimensions: 2"H x 4"W x 4"L WT: 4.5 lbs UPC: 8058774839496

Read more less

12V Drop-In Low Profile Horn with Black & White GrillsMarinco is the leading supplier of horns to the marine industry, with over fifty years of experience in designing and manufacturing sound devices specifically for use in harsh marine environments. Stainless steel is used for all critical components such as trumpets, motor cover, diaphragms, assembly and mounting hardware. The latest addition is the "H" Horn Phase II, which is the loudest drop-in horn available today.Features: Comes with both white ASA and black ABS screw-in grills Grills have water resistant fabric liners Easy installation: 2.75" diameter hole x 1" deep 12 Volt, maximum amp draw: 4 Amps New louder dB(A) rating: 111 dB at one meter Fundamental frequency: 360 +/- 20Hz Mounts from the outside, grill screws on for easy install Easy retrofit Specifications: Voltage - Input Range (Volts): 12v Box Dimensions: 2"H x 7"W x 10"L WT: 0.7 lbs UPC: 035028100807

Read more less

Dual Speed Intermittent Wiper Motor ControllerSynchronized control of single or dual speed 12V/24V wiper systems, features intuitive automotive style functionality. Easy to use with included Contura switch, and easy to install with ¼" spade connectors. IP67 potted aluminium construction for harsh environment durability.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

TEC-DIVERS Plate AnodePlates for HullsMaterial: MagnesiumLength: 12.01"Width: 5.98"Height: 0.51"Weight: 2.76lbs Specifications: Material: Magnesium Box Dimensions: 1"H x 6"W x 12"L WT: 2.7 lbs UPC: 8059617816759 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Long Towel Bar 23"L x 1"H x 2-1/2"D Includes mounting hardware

Read more less

Inboard/Outboard Rail MountThe Kuuma Grill Rail Mount is ideal for using your Kuuma grill aboard your boat by mounting it on any cockpit rail. This mount allows your grill to hang outside the rail to protect fiberglass from spills and splatters.Compatible With:Any Kuuma grillFeatures: Can be used on 7/8" - 1-1/4" round horizontal railings or on 1-1/4" square railings All installation hardware included Made of rust-resistant anodized aluminum Dimensions (L x W x H) - 9" x 2" x 2.5" *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Pigtail AdapterThese adapters are equipped with covers and sealing collars (where indicated), and are for use in wet locations.Boat Side: Female Connector 50A 125/250V Locking w/Sealing Collar System Attaches to boat inlet or cordset Dock Side: Male Plug 30A 125V Locking Attaches to dockside receptacle or cordset WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Pigtail Adapter Box Dimensions: 4"H x 9"W x 12"L WT: 2.5 lbs UPC: 093344010309

Read more less

TM87 10' Rack & Pinion Steering SystemFeatures: High-Efficiency Rack & Pinion Steering System Compatible with SSC134, SSC135, and SSC154 competing cables and SH91610p helm Kit Includes: G87 Front Mount Helm TM87XLL High-Efficiency Cable X34 Mounting Bezel Performance Components: All stainless steel cable output ends Made of corrosion-resistant materials Standard 3/4" tapered shaft 3.7" cable stroke 3.3 turns lock-to-lock 7.9" cable bend radius TM87 Steering Systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat. Optional Steering Wheel. Exceeds ISO 8848 safety standards. Exceeds ABYC P17 safety standards. Universal replacement steering cable for standard and non-feedback Rack & Pinion Steering Systems. No need to drill holes: X34 bezel fits the same bolt pattern as your existing helm. Use your existing steering wheel: 3/4" tapered shaft fits most steering wheels up to 16" (406mm) diameter Fast, simple, easy cable installation: Universal replacement for standard, ZTF, and no feedback rotary helms

Read more less

18" Straight Trolling Motor Plate for Minn Kota QuestThe Sea Brackets 18-inch Straight Trolling Motor Mounting Plate, designed for the Minn Kota’s RTA-55 Quick Release Bracket, offers a robust and reliable solution for installing any Quest Series Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Specifications: Size: 18” x 10” x 1/2”Recommended Hardware:316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Minn Kota’s RTA-55 or MKA-56 Quick Release Bracket Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 3/8–16 flat-head Phillips machine screws, fender washers, and lock nuts Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.For a reliable, sturdy, and corrosion-resistant mounting solution for the trolling motor, choose the Sea Brackets 18-inch Straight Trolling Motor Mounting Plate designed for all RTA-55 and MKA-56 Quest series trolling motors.

Read more less

5/16" Backing Disk for Garmin Kraken Mounts - 2-PackSpecifications: Size: 5/16" Backing Disk Specifically for Kraken Mount 2-Pack

Read more less

SilverSteer™ Front Mount Outboard Hydraulic Steering System w/ UC130-SVS-1 CylinderSpecifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.Whether a bass boat, flats boat or tournament-style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive, and precise steering.Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders.UC130-SVS-1 Cylinder is ideal for applications with limited space or potential pinch-points between the cylinder and transom (i.e., when tilting the motor all the way up or motors mounted on a jack plate).  The end-mounted fittings keep the hydraulic hoses free and clear.SilverSteer™ Package Kit Contains:UC130-SVS-1 Cylinder (fittings face out from the ends of the cylinder) Quick Guide (pdf)Brochure (pdf)

Read more less

Clamp-On Rail Mounted Cup Holder - Large for Up to 2" Rail - GreyCamco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 1-1/2-inch to 2-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers.Features: The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 1-1/2-inch to 2-inch boat rails Compatibility: Fits most standard cups, cans, bottles and tumblers Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place Durable Construction: Constructed of a durable, UV-resistant polymer Color: Grey

Read more less

12" x 18" Sailfish FlagFisherman's Catch FlagsAll flags measure 12" x 18" with brass grommets. Specifications: Type: Flags & Flag Poles Box Dimensions: 1"H x 5"W x 8"L WT: 0.4 lbs UPC: 040011932884

Read more less

Fixed Filet Knife Set - 4 Knives - 5”, 6”, 7” & 8” Fixed KnivesThe Toadfish Fixed Fillet Knife Set brings together all four of our high-performance blades—5”, 6”, 7”, and 8”—in one premium collection. Each knife is crafted with a corrosion-resistant coated blade and an ergonomic, non-slip handle designed for all-day comfort and control. Whether you're breaking down small inshore species or tackling big offshore fillets, this set gives you the ideal tool for every job.Housed in a durable, water-resistant zip-up carrying case, this collection is built for life on the water. The custom-molded interior keeps each knife secure and protected, while the compact design makes it easy to take from boat to cleaning station and beyond.Whether users are on the dock, in the kitchen, or out in the wild, the Toadfish Fixed Fillet Knife Set should be the go-to for clean cuts, easy handling, and dependable performance.Toadfish Model Number: TFFILETSET (GIFT SET)Features: Non-slip ergonomic handle 8CR14 High Carbon Stainless Steel with Titanium Coating Non-Slip Raised Rib Rubber Grip Tapered standard flex designs Custom zip-up carrying case – Durable, organized, and ready to travel Products Included: 5” Flex Fillet Knife – For precise cuts and delicate work 6” Fillet Knife – All-around utility for most species 7” Fillet Knife – Ideal for medium to large fish 8” Breaking Knife – Heavy-duty power for big cuts Custom zip-up carrying case – Durable, organized, and ready to travel

Read more less

2" Streamlined Shaft Anode - AluminumAluminum shaft anode with 2 halves and stainless steel hardware.Nuts are pressed into the casting and bolts are captured with plastic retaining washers for easy assembly.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.The anode includes the exclusive, patented “red spot” wear indicator.Dimensions: A - 2" (51mm) B - 3-1/4" (83mm) C - 2-7/8" (73mm)

Read more less

Performance Gen 3 Starlink Antenna Mount with 8 Degree Wedge Base - WhiteThe Seaview SRM300WB8 surface mount for the Starlink Performance Gen 3 Antenna has been specifically designed for the harsh marine environment. If it's good for the marine environment, then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-sides, UTVs, trucks, etc.).The SRM300WB8 kit includes a Starlink Performance Gen 3 adapter plate (ADASPG3AP) and an 8° wedge base (SVSLWB). The wedge base has pre-drilled mounting holes for easy hardware fastening and is drilled and tapped for the included CG30PW cable seal, ensuring a watertight and secure installation without the need to cut Starlink connectors.The aluminum wedge base has a 3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance.

Read more less

Adhesive Dispensing GunThe AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges (sold separately) When using AT-6030 adhesive it requires AT-12 (10 to 1 plunger). Replacement plungers are also available.

Read more less

Stainless Steel Cup InsertFeatures: Material: Stainless Steel Cup Insert Mates with PCHE

Read more less

PRO 25' with Dual Flex Relief 1/2" ID HP Quality HoseThe 1/2” ID HoseCoil PRO provides a 47% increase in flow rate over 3/8” ID. HoseCoil PRO features a large 4.75” coil for better ease of handling and dual strain reliefs to reduce kinking. The HoseCoil PRO is not only larger in size, it is made with much thicker material for added strength and durability. Built with 3/4” garden style fittings, it fits all standard US hose connections. Specifications: Type: Tools & Accessories Box Dimensions: 5"H x 5"W x 16"L WT: 2.45 lbs UPC: 659988120288

Read more less

Letter & Number Kit - BlackFeatures: 3-inch, waterproof vinyl, pressure-sensitive labels Resists fuel, fading, and scratches Kit contains (Black Pieces): Four of each letter and number, plus twelve dashes totaling 148 pieces *Meets USCG guidelines Quick Guide (pdf)

Read more less

MACH™ Series High Efficiency & Flexibility Engine Control Cable - 33C Universal Style  - 36'MACHZero - Universal style (like C2, C8)MACHZero: 87 mm (3.4”) For use with inboard, sterndrive and outboard engines. Ideal for high performance applications, long cable runs and complex routings. Blue color jacket designed for high performance applications.For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement. Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required. Mach Series cables also feature solid stainless steel output fittings.The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables. The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.Features: Suitable for outboard – inboard and sterndrive engines High efficiency for smooth operation High flexibility for reduced bend radius Ideal for long complex cable routing Maintenance free Stainless steel cables end fittings Blue outer jacket resists against abrasion, UV and chemicals

Read more less

SikaBiresin® AP112 White Gallon BPO Hardener RequiredSikaBiresin® AP112 is a fibrous filler that makes it very useful for increased bonding strength or for rebuilding broken or void areas in SMC, RIM, and other thermoset composites. It is a smooth thixotropic paste system that exhibits easy mixing and stable application qualities. It can be applied in varying degrees of thickness with minimal shrinkage and can be used for deeper surface composite repairs before final surfacing with a fairing compound.Features: Exceptional adhesion Quick setting Minimal shrinkage Usage:SikaBiresin® AP112 can be used in the following bonding applications: FRP composites to FRP, rebuilding broken areas, metal inserts to fiberglass, marine fabrication, metal to concrete, detail blocks to FRP, wood to wood bonding, and metal to metal bonding.Advantages: Exceptional adhesion Quick setting Minimal shrinkage No bleed out Excellent finishing and machinability Accept virtually all types of finishes Low moisture absorption High impact strength

Read more less

Water Magnet Microfiber Drying Towel - 22" x 30"Microfiber towels remove excess water and reduce drying time.No car detailing project would be complete without the perfect microfiber towel. Save money and waste with a reusable towel that will gently shine and polish your vehicle while drying off excess water.Meguiar’s Microfiber Water Magnet Drying Towel reduces drying time with less wring-outs by absorbing up to two times the amount of water from traditional terry towels. Different from the typical towel, the waffle design contains more fabric, which allows user to pick up extra amounts of water with a quick swipe. This microfiber towel is the ideal water magnet that leaves a spot-free finish after each use making it easy for anyone to finish their car project with ease.Ways to Use:Vehicles/TrucksThe Meguiar’s Microfiber Water Magnet Drying Towel is great for use on any vehicle or truck during a routine car wash. Simply start with your basic two bucket wash ensuring that your vehicle is rid of everyday dirt and grime. Finish off the wash with this reusable towel to leave behind spot-free finish.Recreational VehiclesThe Meguiar’s Microfiber Water Magnet Drying Towel can also be used on recreational vehicles. Whether cleaning up your RV for a road trip or sprucing it up along the way, the microfiber towel comes in handy. This reusable towel can easily remove water from windows to help bring more visibility during a commute or wipe off extra road grime keeping your RV in tip-top shape.BoatsKeep your boat rust-free with the Meguiar’s Microfiber Water Magnet Drying Towel. The reusable towel can be easily packed during days out in the ocean to help clean any spills, splatters or unwanted liquids in or around your boat. The microfiber towels are also a great aid during the off-season to help keep a swirl-free and polished finish on the exterior of your boat.MotorcyclesUnpredictable weather can get you suddenly caught in a rain storm! With the Meguiar’s Microfiber Water Magnet Drying Towel you can wipe excess water off your bike preventing any slick surfaces while you cruise on the open roads. The reusable towel can be easily folded and packed in any bag as you head off for a day of adventure.Features: REDUCED DRYING TIME: This means less wring-outs and better absorbency BEST IN CLASS: Absorbs up to two times the water of traditional terry towels NO STREAKS: Leaves a spot-free finish without streaking REUSABLE: High-quality means you can use again and again (machine washable) Specifications: Type: Tools & Accessories Box Dimensions: 2"H x 4"W x 11"L WT: 0.4 lbs UPC: 070382820008

Read more less

Universal Sonar 2 Adapter CableGarmin Adapter Cable for Echo SeriesUniversal Sonar delivers streamlined, interface-free sonar performance and DualBeam PLUS technology for best view of the waters below. This adapter connects your motor to your Garmin echo series with waterproof connectors. Brochure (pdf)

Read more less

RTA-17 Composite Quick Release BracketEasily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with 72" shaft length motors. Features: Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Locking handle can be secured with padlock (not included) for additional security Compatible with Riptide Ulterra, Riptide Terrova, Riptide ST, Riptide PowerDrive, and Riptide SP NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the RTA-54 model.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

TM87 19' Rack & Pinion Steering SystemFeatures: High-Efficiency Rack & Pinion Steering System Compatible with SSC134, SSC135, and SSC154 competing cables and SH91610p helm Kit Includes: G87 Front Mount Helm TM87XLL High-Efficiency Cable X34 Mounting Bezel Performance Components: All stainless steel cable output ends Made of corrosion-resistant materials Standard 3/4" tapered shaft 3.7" cable stroke 3.3 turns lock-to-lock 7.9" cable bend radius TM87 Steering Systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat. Optional Steering Wheel. Exceeds ISO 8848 safety standards. Exceeds ABYC P17 safety standards. Universal replacement steering cable for standard and non-feedback Rack & Pinion Steering Systems. No need to drill holes: X34 bezel fits the same bolt pattern as your existing helm. Use your existing steering wheel: 3/4" tapered shaft fits most steering wheels up to 16" (406mm) diameter Fast, simple, easy cable installation: Universal replacement for standard, ZTF, and no feedback rotary helms

Read more less

TM87 20' Rack & Pinion Steering SystemFeatures: High-Efficiency Rack & Pinion Steering System Compatible with SSC134, SSC135, and SSC154 competing cables and SH91610p helm Kit Includes: G87 Front Mount Helm TM87XLL High-Efficiency Cable X34 Mounting Bezel Performance Components: All stainless steel cable output ends Made of corrosion-resistant materials Standard 3/4" tapered shaft 3.7" cable stroke 3.3 turns lock-to-lock 7.9" cable bend radius TM87 Steering Systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat. Optional Steering Wheel. Exceeds ISO 8848 safety standards. Exceeds ABYC P17 safety standards. Universal replacement steering cable for standard and non-feedback Rack & Pinion Steering Systems. No need to drill holes: X34 bezel fits the same bolt pattern as your existing helm. Use your existing steering wheel: 3/4" tapered shaft fits most steering wheels up to 16" (406mm) diameter Fast, simple, easy cable installation: Universal replacement for standard, ZTF, and no feedback rotary helms

Read more less

TM87 11' Rack & Pinion Steering SystemFeatures: High-Efficiency Rack & Pinion Steering System Compatible with SSC134, SSC135, and SSC154 competing cables and SH91610p helm Kit Includes: G87 Front Mount Helm TM87XLL High-Efficiency Cable X34 Mounting Bezel Performance Components: All stainless steel cable output ends Made of corrosion-resistant materials Standard 3/4" tapered shaft 3.7" cable stroke 3.3 turns lock-to-lock 7.9" cable bend radius TM87 Steering Systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat. Optional Steering Wheel. Exceeds ISO 8848 safety standards. Exceeds ABYC P17 safety standards. Universal replacement steering cable for standard and non-feedback Rack & Pinion Steering Systems. No need to drill holes: X34 bezel fits the same bolt pattern as your existing helm. Use your existing steering wheel: 3/4" tapered shaft fits most steering wheels up to 16" (406mm) diameter Fast, simple, easy cable installation: Universal replacement for standard, ZTF, and no feedback rotary helms

Read more less

Sikaflex® 291 Fast Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - BlackSikaflex®-291 is a 1-component, marine grade polyurethane elastomeric adhesive and sealant. Used by many boat builders, its fast cure time makes it ideal for applications where speed is important.Uses:General all-purpose, marine adhesive and sealant, which may be used for light duty bonding. Sikaflex®-291 has excellent adhesion to gelcoat, fiberglass, metal and wood that can be gunned or brushed into place.Characteristics & Advantages: Use above and below water lineResists salt water Fast strength build-up Paintable and sandable Excellent bond NSF approved for potable water (black and white only) USDA approved for incidental food contact WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

FLYBRIDGE LED KITS FOR LED (TWO-PIECE) KITSFlybridge LED Key Pad, 20' Shielded Flybridge Kit and Y-ConnectorSecond station LED Key Pad connecting to the LED Indicator (Two-Piece) Integrated Tactile Switch Kit (part# 15270-001 and/or 15271-001) Add this second station key pad to your NEW (Two-Piece) Integrated Tactile Switch by plugging into the Y Connector Harness.Kits Include Flybridge LED Key Pad Shielded Harness 30097-xxx series Y- Connector 3 Year Warranty Replacement parts are available and are sold separately. Specifications System Type: Single or Dual Actuator Compliance: CE Certified WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

101 Actuator- 24 Volt- 2-1/4  Stroke with Mounting HardwareThe 101 Actuator is used in all Standard, Edge Mount and Standard Performance kits. 2.25 stroke. Overall length (tip to top) is 12.5 inches.  Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing.Specifications: Newly implemented Anti Extrusion Ring (AXR) seal stabilization system. Stronger top cap and mounting clevis design Improved pressure-tight torx screws Integrated wiper seal at actuator base Molded-in brass thrust bearing design Thicker and stronger motor housing wall Improved O-Ring design for more consistent seal Over-molded cable providing a stronger tighter seal Upper mounting bracket with gland seal Features: Lenco's ballscrew design is more reliable and twice as powerful compared to typical hydraulics Lenco's tough, high-torque actuator motor easily pushes 500 pounds. Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion. 24 Volt 5/16" mounting hardware 6 foot cable WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

3/4" Quick Release Connect with Suction Stopping TechnologyFeatures: Unique version of the standard male Quick Connect fitting with their "suction stopping" technology.  Sac Valve Threads w/O-Rings For Auto Ballast Systems *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Fittings & Hoses Box Dimensions: 2"H x 2"W x 3"L WT: 0.1 lbs UPC: 817177023134 Brochure (pdf)

Read more less

XL Water Sprite Deck Mop - 72" - Long HandleThe Best Chamois Mop - Now Even Bigger!The XL Chamois Mop is 33% larger than the original, giving you more coverage with every pass. Mounted on a fixed-length bamboo handle with a premium painted finish, this mop is built for durability and performance.Made from highly absorbent PVA material, it outperforms traditional chamois by soaking up water quickly and preventing water spots. Plus, it resists mold and mildew, ensuring a longer lifespan. The 2 7/8-inch wide strips reach into tight spaces, making drying easier than ever.Bigger. Stronger. Better. Specifications: Type: Tools & Accessories Box Dimensions: 4"H x 4"W x 74"L WT: 2 lbs UPC: 703485000236

Read more less

Handle Mate PDF for 855 HandlePersonal Flotation Device for your 855 HandleA neoprene sleeve that protects your surfaces from scratches and dings. Foam insert adds valuable flotation to your Shurhold handle. Specifications: Type: Tools & Accessories Box Dimensions: 3"H x 8"W x 10"L WT: 0.45 lbs UPC: 703485121139 Brochure (pdf)

Read more less