FREE SHIPPING ON ORDERS OVER $100.00 Dollars!

  • TROLLMaster Honda 5, 8, 9.9. 15 (1980-2000) [TM200HWKIT]

    TROLLMaster TROLLMaster Honda 5, 8, 9.9. 15 (1980-2000) [TM200HWKIT]

    Honda 5, 8, 9.9. 15 (1980-2000)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

    $27.99

  • Uflex 45 Adjustable Fitting f/Back of UP Series Helms ORB 6 to 3/8" COMP [AF45]

    Uflex USA Uflex 45 Adjustable Fitting f/Back of UP Series Helms ORB 6 to 3/8" COMP [AF45]

    45° Adjustable Fitting for Back of UP Series HelmsTypical Application:Fitting for the back of the UP series helmsSpecifications: ORB, Size #6 to 3/8 COMP FITTING Helm Side = 9/16 - 18 UNF 2A Hose Side = 9/16 - 24 UNEF 2A

    $39.99

  • Turning Point Hub Kit #701 [11700100]

    Turning Point Propellers Turning Point Hub Kit #701 [11700100]

    Hub Kit #701Features: Lifetime Warranty Never buy another hub kit system again Inner splines adapt to the engine Outer hub compatible with different props Reduce gear shock & engine/drive damage Save up to 30% when purchasing a replacement prop Eliminate propeller vibration & chatter Eliminate hub cracking & failure Corrosion resistant materials - brass splines Reduce gear shock & engine/drive damage WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

    $60.99

  • Turning Point Express Mach3 - Right Hand - Stainless Steel Propeller - EX1/EX2-1319 - 3-Blade - 13.25" x 19 Pitch [31431912]

    Turning Point Propellers Turning Point Express Mach3 - Right Hand - Stainless Steel Propeller - EX1/EX2-1319 - 3-Blade - 13.25" x 19 Pitch [31431912]

    Express® Mach3™ - Right Hand - Stainless Steel Propeller - EX1/EX2-1319 - 3-Blade - 13.25" x 19 PitchUtilizing almost 40 years of race boat and high performance prop design expertise, our Express® Mach3™ series of props captures all the best techniques and technologies available to get the most out of your boat. Aggressive pitch angles, radical designs, sharp cup profiles. These three blade propellers excel at achieving maximum speed, while delivering Best-in-Class handling and acceleration. Hole Shot? Got it, and hang on! Cornering? We've got that, too! Top Speed? We say "No Faster Prop on the Water" for a reason! Upgrading your current propeller from aluminum to stainless steel, or from an old generation design to the latest technology, Express Mach3 Propeller is the best investment in boat improvement you can make. Today's Designs will run circles around the competition, and can make dramatic improvements in boat performance. The gain in fuel economy can often pay for the cost of a new propeller in one or two seasons, making it a sound investment in your time on the water. Proprietary Stainless Steel, TP17™Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pitch: 19 Material: Stainless Steel Diameter (Inches): 13-1/4" Rotation: Right Box Dimensions: 8"H x 15"W x 15"L WT: 12.6 lbs UPC: 652480200748 Quick Guide (pdf)Brochure (pdf)

    $333.99

  • Turning Point Hub Kit #500 [11500000]

    Turning Point Propellers Turning Point Hub Kit #500 [11500000]

    Turning Point Hub Kit: 500Features Lifetime Warranty Never buy another hub kit system again Inner splines adapt to the engine Outer hub compatible with different props Reduce gear shock & engine/drive damage Save up to 30% when purchasing a replacement prop Eliminate propeller vibration & chatter Eliminate hub cracking & failure Corrosion resistant materials - brass splines Reduce gear shock & engine/drive damage Compatible with Michigan Wheel® XHS® and Mercury® Flo Torq® hub kits, but greatly increases ease of installation, durability, and shock absorption value. Also adapts to all Michigan Wheel® and Mercury® interchangeable propellersWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

    $46.99

  • Attwood Deck Fill f/Pressure Relief Systems - Angled Body  Scalloped Black Plastic Cap [99DFPVAB1S]

    Attwood Marine Attwood Deck Fill f/Pressure Relief Systems - Angled Body Scalloped Black Plastic Cap [99DFPVAB1S]

    Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Black Plastic CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.Features: Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications) Dual 1 psi diurnal emission control and overpressure relief safety valves built into the cap Automatic nozzle shutoff 4-18 gpm Black Composite finish An essential component of VaporTec and SecureStop Designed and tested to prevent water from entering the fuel system EPA / CARB Certified Hinged audible click cap meets EPA requirements Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards *Compatible with Ethanol blended fuels Quick Guide (pdf)

    $75.99

  • Faria Dress White Boxed Set - Outboard Motors [KT9794]

    Faria Beede Instruments Faria Dress White Boxed Set - Outboard Motors [KT9794]

    Dress White Boxed Set - Outboard MotorsPerimeter-lighted White dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens.Packaged and ready for the display counter.  This 4 Gauge Boxed Set offers a complete set of gauges ready to install.Outboard Motors Boxed Set Includes Speedometer (55 MPH) (Mechanical) Tachometer (7000 RPM) Fuel Level (E-1/2-F) Voltmeter (10-16 VDC) Factory P/N KT9794*Sold as a Box Set**Gauge Covers not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Box Set Series: Dress White Voltage - Input Range (Volts): 12/24 V Box Set: Yes Box Dimensions: 7"H x 10"W x 21"L WT: 4.3 lbs UPC: 759266097940

    $249.99

  • Raritan K.O. Kills Odors Bio-Active Treatment - Gallon [1PKOGAL]

    Raritan Raritan K.O. Kills Odors Bio-Active Treatment - Gallon [1PKOGAL]

    K.O. Kills Odors Bio-Active Treatment - GallonK.O. utilizes live, odor-killing bacteria that digest liquids, solid waste, and paper, totally emulsifying them so there's no need to add tissue digesters or other boosters to your system. The bacteria in K.O. neutralize the odor-causing elements in waste, effectively converting the contents of your holding tank to an odor-free product. Chemicals only mask the odor temporarily. Although they kill odor-causing bacteria, chemicals also kill other bacteria that suppress odor. Chemicals can cause the odor problems you're trying to solve! Enzymes stimulate the breakdown of waste already in the tank, but are not effective against odor, and are diluted by new waste as it is added.Features: Kills odors in marine and RV holding tanks Bio-Active Non-Toxic Non-Caustic WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $41.99

  • BoatLIFE Life-Calk Sealant Tube - Non-Shrinking - 2.8 FL. Oz - White [1030]

    BoatLIFE BoatLIFE Life-Calk Sealant Tube - Non-Shrinking - 2.8 FL. Oz - White [1030]

    Life-Calk Sealant Tube - Non-Shrinking - 2.8 FL. Oz - WhiteA long lasting, permanently flexible marine polysulfide sealant which can be sanded, painted***, and used above and below the waterline. Tack-free in 1 to 3 days, excellent resistance to teak oils, gasoline, and diesel fuel. Ideal for teak decks, to bed deck and hull hardware, seal thru-hull fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal with excellent waterproofing and adhesion qualities. Can be applied underwater for emergency repairs. Can be applied to damp surfaces.*Not compatible with all paints, Sikkens, Cetol, Deks, OljeWARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $13.99

  • PTM Watersports Board Rack Replacement Knob - Black [P12927-58TEBBK]

    PTM Watersports PTM Watersports Board Rack Replacement Knob - Black [P12927-58TEBBK]

    Board Rack Replacement Knob - BlackReplacement Swivel Release Knob for the Clamping and Bungee Board Racks.*Sold as an Individual

    $15.99

  • BoatLIFE Life-Calk Cartridge - Mahogany [1035]

    BoatLIFE BoatLIFE Life-Calk Cartridge - Mahogany [1035]

    Life-Calk Cartridge - MahoganyA long lasting, permanently flexible marine polysulfide sealant which can be sanded, painted***, and used above and below the waterline. Tack-free in 1 to 3 days, excellent resistance to teak oils, gasoline, and diesel fuel. Ideal for teak decks, to bed deck and hull hardware, seal thru-hull fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal with excellent waterproofing and adhesion qualities. Can be applied underwater for emergency repairs. Can be applied to damp surfaces. *Not compatible with all paints, Sikkens, Cetol, Deks, OljeWARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $26.99

  • Faria Chesapeake Black SS 4" Tachometer w/Systemcheck Indicator - 7000 RPM (Gas) f/ Johnson / Evinrude Outboard) [33750]

    Faria Beede Instruments Faria Chesapeake Black SS 4" Tachometer w/Systemcheck Indicator - 7000 RPM (Gas) f/ Johnson / Evinrude Outboard) [33750]

    Chesapeake Black SS 4" Tachometer w/Systemcheck Indicator - 7000 RPM (Gas)  (Johnson / Evinrude Outboard)Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.Tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.These tachometers have a warning light system built into the dial that show off warning indicators when a fault is detected from the engine.SystemCheck Warnings No Oil Engine Overheat Check Engine Low Oil 4" - Hole size: 3.375" (85mm)For Engine Types:(Johnson / Evinrude Outboard) Specifications: Anti-scratch glass lens Perimeter lighted back light 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N TC9884*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer w/System Check Series: Chesapeake Black Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Set: No Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 745425337507 Quick Guide (pdf)

    $224.99

  • Performance Metals Mercruiser Bravo 3 (2004  Later) Complete Anode Kit - Aluminum [10165A]

    Performance Metals Performance Metals Mercruiser Bravo 3 (2004 Later) Complete Anode Kit - Aluminum [10165A]

    Mercruiser Bravo 3 (2004 & Later) Complete Anode Kit - AluminumComplete kit of anodes and hardware for Mercruiser Bravo 3 (2004 and later) outdrive.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.Anodes include the exclusive, patented “red spot” wear indicator.Replaces:Mercury Kit # 888761Q04Includes: 00046A Qty 1 (821630) 00047A Qty 2 (806190) 00049A Qty 1 (762145) 00163A Qty 1 (865182) 00268A Qty 1 (76214 4) Specifications: Material: Aluminum Box Dimensions: 3"H x 6"W x 11"L WT: 1.9 lbs UPC: 870648001659

    $46.99

  • Marinco ConnectPro Charging/Trolling System Receptacle & Plug [12VCP]

    Marinco Marinco ConnectPro Charging/Trolling System Receptacle & Plug [12VCP]

    ConnectPro® Charging/Trolling System Receptacle & PlugConnectPro® Receptacle Universal design for 2 or 3-wire configuration 12, 24, 12/24, 24/36 or 36 volt systems Watertight sealing cap Corrosion resistant, plated brass electrical components Drain holes in receptacle keep water away from electrical components Perma-Lock™ screw terminals will not loosen under extreme hull vibration Standard 1-1/8" diameter mounting hole Easy to install, with supplied mounting plate for front panel installation, or locking ring for rear access installation Accepts 10 and 8 gauge wire Easily replaces other trolling motor plugs and receptacles ConnectPro® Plug O-ring seal for waterproof connections Weather resistant plug cover Corrosion resistant, plated brass electrical components Accepts 16 to 8 gauge wire Ergonomic contoured grip for easy hook-up and ground blade alignment WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 2"H x 5"W x 9"L WT: 0.35 lbs UPC: 093344304668 Brochure (pdf)

    $49.99

  • TROLLMaster Mercury 15, 20 Remote Shift/Throttle  Tiller (2011-Present) [TM214HWKIT]

    TROLLMaster TROLLMaster Mercury 15, 20 Remote Shift/Throttle Tiller (2011-Present) [TM214HWKIT]

    Mercury 15, 20 Remote Shift/Throttle & Tiller (2011-Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

    $28.99

  • Minn Kota Ultrex 112 Trolling Motor w/Micro Remote - MEGA Down Imaging - 36V - 112LB - 52" [1368898]

    Minn Kota Minn Kota Ultrex 112 Trolling Motor w/Micro Remote - MEGA Down Imaging - 36V - 112LB - 52" [1368898]

    Ultrex 112 Trolling Motor with Micro Remote - MEGA Down Imaging - 36V - 112LB - 52"Step on the Ultrex™ foot pedal and feel what Power Steering does to a trolling motor. Then tap the Spot-Lock® button to stay on a fishing spot automatically. Only Ultrex combines the most responsive, intuitive steering ever with GPS-powered automatic boat control. The only thing Minn Kota didn't do to it was compromise. Power Steering The most comfortable, responsive steering available. Ultrex's foot pedal is built for all-day ease, with precision control and instant responsiveness.Steering Lock When you take your foot off Ultrex's foot pedal, the motor head remains pointed in the direction you left it. No recoil or readjustment, just easier steering every day.Advanced GPS Trolling System The One-Boat Network gives you unprecedented control over your boat by linking your trolling motor to your Humminbird® fish finder. Control your trolling motor from the included remote or a connected Humminbird. You can set Spot Locks, record paths, follow depth contours, automatically navigate to your favorite spots, control speed and steering, and more.Spot-Lock with Jog Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on the pre-installed GPS system, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction.Lift-Assist Ultrex's patented Lift-Assist Design cuts the weight of stow and deploy in half. Features a stainless steel, nitrogen gas-charged spring.Heel-Toe / Cable Foot Pedal It's the only foot pedal with Power Steering for all-day comfort and instant responsiveness —  plus a button to activate Spot-Lock electronic anchor.Digital Maximizer™ Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.Indestructible Composite Shaft—Guaranteed for LifeAt the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.Mobile App Compatibility Control Ultrex directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock, and AutoPilot — plus the ability to update software.Built-In MEGA Down ImagingWith a transducer built right into the motor, you get crystal clear Humminbird® MEGA Down Imaging and a clean protected look.What's IncludedUltrex 112 lb. 52" trolling motor with Built-In MEGA Down Imaging, Corded Foot Pedal, Micro Remote, Lanyard, Heading Sensor, 30' Ethernet Extension Cable, Stabilizer, Hold Down Strap, MKP-38 Prop and Mounting HardwareSpecifications: For Use In: Freshwater Shaft Length (inch): 52" Max Thrust (pounds): 112 lbs. Voltage: 36 One-Boat Network Compatible: Yes QUEST Series: No Spot-Lock: Yes Built-In Sonar: MEGA Down Imaging Foot Pedal Style: Heel-toe/cable Control: Foot Pedal Auto/Stow Deploy: No Power Trim: No Power Steering: Yes Lift-Assist: Yes Bowguard: No Wireless Remote: Yes AutoPilot: Yes CoPilot: No Speeds: Variable Digital Maximizer: Yes Battery Meter: Yes Max Amp Draw: 52 Mount Style: Mono-arm Mounting Location: Bow-mount  Motor Style: Cable-steer Prop: Weedless Wedge 2 (MKP-38) Warranty: Three-Year Warranty Specifications: Autopilot: Yes Built-In Transducer: Yes Control Type: Micro Remote Included Propeller: MKP-38 Mounting Style: Bow Salt Water/Fresh Water: Fresh Series: Ultrex Shaft Length (Inches): 52" Thrust (Pounds): 112 lbs Voltage - Input Range (Volts): 36v Box Dimensions: 8"H x 18"W x 70"L WT: 95 lbs UPC: 029402050482 Owner's Manual (pdf)

    $3,599.99

  • Uflex HYCO 1.1 Front Mount OB System up to 175HP - Includes UP20 FM Helm, 2qts of Oil, UC95-OBF Cylinder [HYCO 1.1]

    Uflex USA Uflex HYCO 1.1 Front Mount OB System up to 175HP - Includes UP20 FM Helm, 2qts of Oil, UC95-OBF Cylinder [HYCO 1.1]

    HYCO 1.1 Front Mount OB System up to 175HP - Includes UP20 FM Helm, 2qts of Oil, UC95-OBF CylinderFeaturing the unique split tilt tube rod that allows for installation of the UC94 cylinder without removing the engine, the Hyco is an easy and affordable outboard hydraulic steering solution for boats with 150 horsepower and under. Coupled with the composite UP20 helm, the Hyco offers effortless steering with 5 turns lock to lock. And, it is applicable to almost all 2 and 4 stoke outboards engines.Kit Contains: UP20 FM Helm UC95-OBF cylinder OIL 15 - 2 Quarts

    $926.99

  • Uflex Hydraulic Hose Kit 6 - Pair [KITOB-06']

    Uflex USA Uflex Hydraulic Hose Kit 6 - Pair [KITOB-06']

    Hydraulic Hose Kit 6' - PairTwo high pressure flexible hoses, with pre-crimped fittings and bend restrictors on both ends.Fittings: ORFS*Not recommended for use with SilverSteer™ Series cylinders.

    $143.99

  • UFlex M66 11' Fast Connect Rotary Steering Cable Universal [M66X11]

    Uflex USA UFlex M66 11' Fast Connect Rotary Steering Cable Universal [M66X11]

    M66 Fast Connect Rotary Steering CableSteering Helm: Ultraflex T71FC T72FC - T73NR FC T81FC - T82FC T83NR FC Teleflex Safe TQC/NFB Morse D290Ultraflex year 2001 and prior: T71 - T72 - T73NR T74NR - T81 - T82 T83NR - T84NR Length: 11 Feet Specifications: Cable Length (Feet): 11' Box Dimensions: 3"H x 18"W x 23"L WT: 6.4 lbs UPC: 702755017097

    $132.99

  • Faria Chesapeake White SS 4" Tachometer w/Hourmeter (4000 RPM) (Diesel) (Mech. Takeoff  Var. Ratio Alt) [33834]

    Faria Beede Instruments Faria Chesapeake White SS 4" Tachometer w/Hourmeter (4000 RPM) (Diesel) (Mech. Takeoff Var. Ratio Alt) [33834]

    Chesapeake White SS 4" Tachometer with Hourmeter (4000 RPM) (Diesel) Mech. Takeoff & Var. Ratio AltPerimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12vDC, Ground and one of the signal sources listed above.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.4" - Hole size: 3.375" (85mm)Specifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life 12 VDC negative ground Can be adapted for 24 VDC systems Scale - 0 to 10000 Hours Factory P/N TD9108*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer - Diesel Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Set: No Series: Chesapeake White Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 759266338340

    $238.99

  • Faria Chesapeake Black 2" Hourmeter (Digital) [13715]

    Faria Beede Instruments Faria Chesapeake Black 2" Hourmeter (Digital) [13715]

    Chesapeake Black 2" Hourmeter (Digital)Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.Hourmeter operates by applying battery voltage across the gauge's register motor to ground.  The register increments increase when the key switch in on.  Route power through a normally open Oil Pressure switch to count "engine running" hours. 2" - Hole Size: 2.0625" (53mm) Specifications: Anti-scratch glass lens Perimeter lighted back light 12 VDC negative ground Can be adapted for 24 VDC systems Operating Range  - 0 to 10,000 Hours Factory P/N MH0239*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Hourmeter Box Set: No Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Series: Chesapeake Black Box Dimensions: 4"H x 4"W x 5"L WT: 0.25 lbs UPC: 759266137158

    $63.99

  • Faria Dress White 4" Tachometer w/Systemcheck Indicator - 7000 RPM (Gas) (Johnson / Evinrude Outboard) [33150]

    Faria Beede Instruments Faria Dress White 4" Tachometer w/Systemcheck Indicator - 7000 RPM (Gas) (Johnson / Evinrude Outboard) [33150]

    Dress White 4" Tachometer w/Systemcheck Indicator - 7000 RPM (Gas) (Johnson /Evinrude Outboard)Perimeter-lighted White dial with bold Black graphics, White aluminum bezel, contoured Black pointer and flat glass lens.Tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.These tachometers have a warning light system built into the dial that show off warning indicators when a fault is detected from the engine.4" - Hole size: 3.375" (85mm)SystemCheck Warnings No Oil Engine Overheat Check Engine Low Oil For Engine Types:(Johnson/Evinrude Outboard)Specifications: Anti-scratch glass lens 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N TC9887*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer w/System Check Series: Dress White Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Set: No Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 745485331507 Quick Guide (pdf)

    $193.99

  • Thetford AquaMax Holding Tank Treatment - 64oz - Spring Shower Scent [96636]

    Thetford Marine Thetford AquaMax Holding Tank Treatment - 64oz - Spring Shower Scent [96636]

    AquaMax® Holding Tank Treatment - 64oz - Spring Shower Scent AquaMax® Holding Tank Treatment’s advanced enzyme-powered formulas neutralize odors and accelerate waste digestion to prevent clumping, clogging, and tank residue, all at the same time. Thetford’s beneficial probiotic treatments are Bronopol and Formaldehyde free.Features:  Enzyme-based holding tank treatment Breaks down waste and eliminates offensive odors Bottles with child-resistant caps Available in a one-gallon jug, 64-oz. bottle, 32-oz. bottle, and 6 pack of 8-oz. bottles Easy dosing system: 8-oz of AquaMAX® treats a 40-gallon holding tank Formaldehyde free Bronopol free Neutralizes odor Breaks down waste to prevent clumping, clogging, and tank residue Enzymes optimized for MAX performance Beneficial probiotics; good bacteria Septic system safe Campground and marina friendly Compliant with all current regulations Available as a liquid, dry granule or Toss-Ins® This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

    $15.66

  • Tecnoseal Anode Kit w/Hardware - Mercury Verado 6 - Aluminum [20816AL]

    Tecnoseal Tecnoseal Anode Kit w/Hardware - Mercury Verado 6 - Aluminum [20816AL]

    Mercury Verado 6 Anode KitContents: (4) 00833AL (1) 00832AL (1) 00820AL (2) 00825AL Material: AluminumPackaging: PolybagHardware: Included Specifications: Material: Aluminum Box Dimensions: 2"H x 5"W x 5"L WT: 1.7 lbs UPC: 8059617819446 Quick Guide (pdf)Owner's Manual (pdf)

    $45.48

  • Tecnoseal Transom Bar Anode - Aluminum - Yamaha [01112AL]

    Tecnoseal Tecnoseal Transom Bar Anode - Aluminum - Yamaha [01112AL]

    Transom Bar AnodeBar For Engines - Yamaha Material: AluminumLength: 7.99"Height: 1.97"Width: 1.77"Weight: 0.78lbs Specifications: Material: Aluminum Box Dimensions: 2"H x 3"W x 8"L WT: 0.75 lbs UPC: 8059617815660 Quick Guide (pdf)Owner's Manual (pdf)

    $21.00

  • Tecnoseal R3MG Rudder Anode - Magnesium - 3-3/4" Diameter [R3MG]

    Tecnoseal Tecnoseal R3MG Rudder Anode - Magnesium - 3-3/4" Diameter [R3MG]

    Rudder AnodeMaterial: MagnesiumOuter Diameter: 3.63"Height: 0.52"Weight: 0.39lbs Full size and weight Rudder Each includes Stainless Steel hex nut and socket cap screw The captive hex nut is a great feature for underwater installations Specifications: Material: Magnesium Box Dimensions: 2"H x 4"W x 4"L WT: 0.4 lbs UPC: 8033837069904 Quick Guide (pdf)Owner's Manual (pdf)

    $27.99

  • Tecnoseal X7MG Shaft Anode - Magnesium - 1-1/2" Shaft Diameter [X7MG]

    Tecnoseal Tecnoseal X7MG Shaft Anode - Magnesium - 1-1/2" Shaft Diameter [X7MG]

    Shaft AnodeMaterial: MagnesiumOuter Diameter: 2.58"Inner Diameter: 1.50"Height: 2.62"Weight: 0.35lbsHoles: 4 Specifications: Material: Magnesium Box Dimensions: 2"H x 3"W x 3"L WT: 0.4 lbs UPC: 8059617812447 Quick Guide (pdf)Owner's Manual (pdf)

    $29.78

  • Minn Kota RTA-61 Cable-Steer Quick Release Bracket [1862042] Minn Kota RTA-61 Cable-Steer Quick Release Bracket [1862042]

    Minn Kota Minn Kota RTA-61 Cable-Steer Quick Release Bracket [1862042]

    RTA-61 Cable-Steer Quick Release BracketFor quick, easy removal of your cable-steer, bow-mount trolling motor. The extruded aluminum design with side screws provides a quiet and secure locking system. Fits foot control motors with up to a 45" shaft and hand control motors with up to a 52" shaft. They are designed to handle the increased torque of QUEST series motors.Features: Recommended for the higher thrust associated with Ultrex™ QUEST™ series motors Allows trolling motors to be quickly removed from and reattached to the boat deck Top and bottom plates slide together and are tightened/secured to one another using dual-locking hardware Solid, anodized aluminum construction Includes both 5/16" and 1/4" stainless steel mounting hardware Brackets can be secured with a padlock (not included) for additional security Fits 45" shafts and smaller foot-control motors and 52" shafts and smaller hand-control motors

    $197.99

  • 303 Automotive Leather 3-In-1 Complete Care - 16oz [30218]

    303 303 Automotive Leather 3-In-1 Complete Care - 16oz [30218]

    Automotive Leather 3-In-1 Complete Care - 16oz303 Automotive Leather 3-in-1 Complete Care cleans, conditions and provides UV protection to all finished leather and vinyl.  It will help clean up surface dirt and grime, as well as helps repel future dust, lint and stains.  Also contains superior UV protection to prevent fading and cracking of the leather caused by the sun’s harmful UV rays.   Easy to use formula, just spray on and wipe off. Features: No residue left behind Repels dust, lint & stains Conditions leather surface to prevent cracking & fading Provides UV protection for all finished automotive leather & vinyl Safe for use on all finished car leather & vinyl surfaces Made in the U.S.A. *Sold as an IndividualWARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Leather Box Dimensions: 1"H x 5"W x 11"L WT: 1.2 lbs UPC: 082043302181

    $8.79

  • 303 Marine Aerospace Protectant - 16oz [30340]

    303 303 Marine Aerospace Protectant - 16oz [30340]

    Marine Aerospace Protectant - 16ozNo other product provides this much protection for your boat and water gear.  Use Aerospace Protectant to keep your boat’s seats, sails, hull and windows colorful and clean.  Marine Aerospace Protectant is a premium protectant designed to safeguard boats and boat equipment against the damaging effects of daily exposure to UV rays.  It’s safe for use on outdoor gear and apparel, too.Simply spray on and wipe dry to restore color and luster, repel stains and prevent fading even in the harshest marine conditions and sunniest climates.  Aerospace Marine will even help keep fishing gear clean and prevent inflatable boats from sticking together during storage.  And because it’s 100% free of grease-producing silicone oils and petroleum distillates, Aerospace is safe to use on all your outdoor materials - vinyl, rubber, fiberglass and more.No other protectant beautifies as intensely or preserves as powerfully. Keep your boat, water sport equipment and outdoor gear shiny season after season.Features: Powerful UV blockers prevent fading, cracking and premature aging Ideal for - Hypalon inflatable boats, wet/dry suits, tires, side-out seals, RV EDPM rubber roofing, helmets, visors, and goggles.  Not for use on unfinished leathers (such as suede), fabrics (canvas), floorings, clear plastics, gauge panels or headlights. Dries to a clear matte finish Restores lost color and luster Easy to use - Simply spray on and wipe dry Safe and effective for vinyl, Plexiglas®, carbon fiber, rubber, plastics and finished leather Made in the U.S.A. *Sold as an Individual WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer, and Ethylene Glycol which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Corrosion Protection Box Dimensions: 2"H x 4"W x 11"L WT: 1.2 lbs UPC: 082043003408

    $15.99

  • Attwood Deck Mounted Seat Slide [815000]

    Attwood Marine Attwood Deck Mounted Seat Slide [815000]

    Deck Mounted Seat SlideSwivl-Eze has the boating experience to deliver all the kinds of accessories you want.Features: Seating accessories for retrofitting and improving Adapters to change a post installation or swivel location Mounts directly to the boat deck 1-5/8" total height Constructed of strong aluminum Convenient front control operation For use on stamped and welded seat mounts or cast seat mounts not originally equipped with slider

    $142.99

  • Veratron 52 MM (2-1/16") ViewLine Pyrometer - 250 to 1650F - Black Dial  Bezel [A2C59512334]

    Veratron Veratron 52 MM (2-1/16") ViewLine Pyrometer - 250 to 1650F - Black Dial Bezel [A2C59512334]

    52 MM (2-1/16") ViewLine Pyrometer - 250° to 1650°F - Black Dial & BezelVeratron ViewLine offers a comprehensive modular, modern series of instruments for engine monitoring.More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, we offer an innovative comprehensive standard instrumentation platform which is also available for outboard engine use.  ViewLine provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.The ViewLine 52 mm Gauges are available in black or white dial versions, which are always completed with a round bezel in identical color. Interchangeable bezel option.Features: 8 pole Tyco/Hirschmann MQS plug  Red LED Via Plus And Min Warning Light Operating voltage 12 - 24 V  Input signal: standard Ω values  Optional make-point switch can be connected  Reverse polarity protection  Anti-fog double lens  Front side protection rating IP67  52 mm installation diameter  50 mm installation depth  In the Box: Gauge Connection Cable Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Series: ViewLine Gauge Type: Pyrometer Gauge Size: 2-1/16" Box Set: No Box Dimensions: 4"H x 5"W x 5"L WT: 0.4 lbs UPC: 7640178722651 Owner's Manual (pdf)

    $74.34

  • Veratron 52MM (2-1/16") OceanLink Coolant Temperature Gauge (250F) - Black Dial  Bezel [A2C1065980001]

    Veratron Veratron 52MM (2-1/16") OceanLink Coolant Temperature Gauge (250F) - Black Dial Bezel [A2C1065980001]

    52MM (2-1/16") OceanLink Coolant Temperature Gauge (250°F) - Black Dial & BezelOceanLink 52 mm Vessel Status Gauges are connected directly to any OceanLink Master unit using the patented EasyLink serial bus connection.  Up to 16 EasyLink gauges for each Tachometer or GPS Speedometer can be daisy-chained together.  Interchangeable bezel option. Features: AMP Superseal Easylink 270° pointer deflection angle Reverse polarity protection Anti-fog double lens Front & rear protection rating IPX5 Operating temperature range -20 °C / +70 °C Nominal voltage - 12/24V Hole diameter - 52MM In the Box: Gauge Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Water Temperature Voltage - Input Range (Volts): 12/24 V Gauge Size: 2-1/16" Box Set: No Series: OceanLink Box Dimensions: 4"H x 5"W x 6"L WT: 0.35 lbs UPC: 7640178721081

    $86.49

  • Attwood Prop Wrench Set - Fits 17/32" to 1-1/4" Prop Nuts [11370-7]

    Attwood Marine Attwood Prop Wrench Set - Fits 17/32" to 1-1/4" Prop Nuts [11370-7]

    Prop Wrench Set - Fits 17/32" to 1-1/4" Prop NutsMultiple socket sizes for all prop maintenance. Offers multiple sockets to fit from 17/32" to 1-1/4", allowing consumers to service multiple props Built of durable plastic WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Material: Plastic Box Dimensions: 1"H x 7"W x 16"L WT: 1 lbs UPC: 022697137074

    $14.99

  • Weld Mount 1" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83216]

    Weld Mount Weld Mount 1" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83216]

    1" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide range of wire clamps and other small components to composite surfaces. The base plate is 0.62" in diameter with a 1" tall stud. Tensile strength is 300 lbs. and shear strength is 375 lbs. Maximum torque load is 45 inch/lbs.

    $27.99

  • Marinco 7715ELN Weatherproof Cover w/Easy Lock Ring [7715ELN]

    Marinco Marinco 7715ELN Weatherproof Cover w/Easy Lock Ring [7715ELN]

    Weatherproof CoverWeatherproof cover w/Easy Lock Ring - use with 6360CRN or 6364CRN (female connector)WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 4"H x 4"W x 5"L WT: 0.4 lbs UPC: 093344008238

    $25.99

  • Meguiars Gold Class Leather  Vinyl Cleaner - 16oz [G18516]

    Meguiar's Meguiars Gold Class Leather Vinyl Cleaner - 16oz [G18516]

    Gold Class™  Leather & Vinyl Cleaner - 16oz Superior cleaning for leather & vinyl that is strong enough to remove stains, yet gentle enough for general cleaning. Meguiar's® Gold Class™ Leather & Vinyl Cleaner is a quick solution to clean all leather and vinyl surfaces.  The perfect complement to Meguiar's® Gold Class® Conditioner for leather. Features: Formulated with enough strength to remove stains yet gentle enough for general cleaning on all leather and vinyl surfaces Safely removes tough surface dirt and grime as well as embedded oil and water-based stains Revitalizes leather and vinyl surfaces to a clean, supple appearance The convenient spray bottle lets you simply spray and wipe for superior leather and vinyl cleaning

    $8.99

  • Attwood SWIVL-EZE LakeSport 2-3/8" Seat Mount w/Friction Control - Aluminum [818440]

    Attwood Marine Attwood SWIVL-EZE LakeSport 2-3/8" Seat Mount w/Friction Control - Aluminum [818440]

    SWIVL-EZE LakeSport 2-3/8" Seat Mount with Friction Control - AluminumLakeSport Seat Mount is 2-3/8 inch Locking AO-Aluminum, with Friction Control, 3 Degree Tilt, ABYC Code - AO, Installed Height - 5/8 inch, Bulk Packaging. Hardware is Engineered to Exceed ABYC Standards Type A/Operator Models lead the industry with these features: Ergonomic positive-locking handles with stainless steel components inch-Slot inch locking channels (on adjustable-height models) are the safest manual adjustment available. All Models are reinforced for strength: All LakeSport posts are swaged and welded to the bases Bases have underside ribs for superior strength.

    $33.99

  • Rod Saver Flat Foot Recessed Tray f/Wireless Foot Pedals - Minn Kota or MotorGuide [FFWC]

    Rod Saver Rod Saver Flat Foot Recessed Tray f/Wireless Foot Pedals - Minn Kota or MotorGuide [FFWC]

    Flat Foot Recessed Tray for Wireless Foot Pedals - Minn Kota or MotorGuideThis low profile recessed pan is specifically designed for the Minn Kota and MotorGuide Wireless Foot Pedal Control. It is made of durable 1/8" aluminum with a baked on black crinkle powder coat finish. Includes drain line, clamp, stainless steel screws, cutting template and installation instructions. Inside measurements: 15-1/4"L X 11-3/4"W X 1-5/8"H.

    $151.99

  • Scanstrut Open Array Plate 1 f/All Open Array Radars [DPT-OA-PLATE-01]

    Scanstrut Scanstrut Open Array Plate 1 f/All Open Array Radars [DPT-OA-PLATE-01]

    Open Array Plate 1 for all Open Array RadarsThe Modular Dual PowerTower has been designed to allow your open array, radar, Satcom and camera to be mounted together in one single space-saving modular installation.Open Array plate 1 (For all Open Array Radar models) Specifications: Type: Adapters Construction: Powder Coated Aluminum Box Dimensions: 3"H x 11"W x 12"L WT: 3.8 lbs UPC: 5060114796362

    $158.99

  • Meguiar's #59 Quik Wax - 16oz [M5916] Meguiar's #59 Quik Wax - 16oz [M5916]

    Meguiar's Meguiar's #59 Quik Wax - 16oz [M5916]

    Quick Wax®16ozThe spray wax method can quickly add protection and gloss to large surfaces typical on boats and RV's. Whether the surface is wet or dry, this specialized formulation will create a brilliant gloss while adding wax protection. Suitable for use on fiberglass, painted surfaces, stainless steel, and clear plastics. *Use wax only after surface has been cleaned & restored to a "like new" or "average" finish.Benefits Utilizes the highest grade of carnauba to protect all paint surfaces Effortless application and wipe-off in full sun Long-lasting protection Product can be applied by hand Prevents aging and protects surface from contaminants Protects against UV damage and browning VOC Compliant Specifications: Type: Waxes & Polishes Box Dimensions: 2"H x 4"W x 10"L WT: 1.3 lbs UPC: 070382159160

    $7.99

  • Bennett HPU Mounting Bracket [H1179]

    Bennett Marine Bennett HPU Mounting Bracket [H1179]

    HPU Mounting BracketH1179Mounting Bracket for Hydraulic Power UnitWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

    $8.00

  • Dometic Universal Flush Mount Frame f/NRX115S Compressor Refrigerators - Stainless Steel [9620012878]

    Dometic Dometic Universal Flush Mount Frame f/NRX115S Compressor Refrigerators - Stainless Steel [9620012878]

    Universal Flush Mount Frame for NRX115S Compressor Refrigerators - Stainless SteelA universal stainless steel flush mount installation frame for the Dometic NRX 115S fridges. For a secure fit and a luxury finish.Features: Securely fits your fridge in place A neat and smart frame for your fridge Two door mounting options: protruding or flush with the frame Specifications: Type: Mounting Brackets Box Dimensions: 6"H x 26"W x 33"L WT: 8.55 lbs UPC: 6975399592761

    $211.69

  • Trident Marine 6" ID 45-Degree Blue Silicone Molded Wet Exhaust Elbow w/4 T-Bolt Clamps [240V6000-S/S] Trident Marine 6" ID 45-Degree Blue Silicone Molded Wet Exhaust Elbow w/4 T-Bolt Clamps [240V6000-S/S]

    Trident Marine Trident Marine 6" ID 45-Degree Blue Silicone Molded Wet Exhaust Elbow w/4 T-Bolt Clamps [240V6000-S/S]

    6" ID 45-Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident silicone-blend rubber marine wet exhaust connections. They are molded in very high-temperature blue silicone EPDM blended rubber with a smooth bore and cover; except elbows of 6" I.D. or larger have molded reinforcing ribs on the outside. Features: Four stainless steel t-bolt clamps Very high temp silicone/EDPM blend rubber - molded This elbow has excellent resistance to ozone, salt water, diesel fumes, splash, cold, heat, and aging Exceeds (SAE J2006-R1, and ABYC & NMMA P-1) exhaust standards  Blue very high-temperature silicone blended with EDPM rubber at 350°F (177°C) max continuous Construction: Color: Blue Reinforcement: Reinforcing ribs on 6” I.D. and above Temperature Range: up to 350°F (177°C) Specifications: Inner Diameter: (inch) 6” / 152.4 mm A: (inch) 2” / (mm) 5.1  B: (inch) 2” / (mm) 5.1  C: (inch) 6.5” / (mm) 16.5  R: (inch) 1.75” / (mm) 4.5  W: (inch) 0.25" / (mm) 6.4  Elbow Degree: 45 degrees Specifications: ID Diameter (inches): 6" Box Dimensions: 8"H x 8"W x 8"L WT: 3.3 lbs UPC: 704917002347 Quick Guide (pdf)

    $188.99

  • Trident Marine 4 White Stern Flex Hose w/Transom Flange [TFK-4W]

    Trident Marine Trident Marine 4 White Stern Flex Hose w/Transom Flange [TFK-4W]

    4' White Stern Flex Hose with Transom FlangeThis Trident Stern Flex Hose is white (Trident Marine 129W series) and contains wire, control cables, and hoses between the transom and outboard engine(s). Connects to Trident flange part #142W-2000.Features: Highly resistant to crushing, abrasion, and UV and has good resistance to chemicals  Extraordinary flexibility Construction: Hose: Lightweight polyethylene copolymer Reinforcement: Integral Polyethylene Helix Temperature Range: -40°F to 140°F (-40ºC to 60ºC) Specifications: Color: White Inner Diameter: (inch) 2” / (mm) 50.8 Outer Diameter: (inch) 2.35” / (mm) 60 Bend Radius: (inch) 3.5” / (mm) 88.9 Weight: (lb/100 ft.) 26 / (kg/m) 11.8 Quick Guide (pdf)

    $22.99

  • UFlex UP28FM Front Mount Helm Pump [UP28FM]

    Uflex USA UFlex UP28FM Front Mount Helm Pump [UP28FM]

    UP28F - Front Mount Helm PumpFeatures: Compact design Ball bearing piston race Built-in lock valve for positive rudder lock Integral relief valve for over-pressure protection 3/4" tapered stainless steel shaft Easily accessible lock valve and shaft seal for replacement Cast iron rotor for greater durability and longer life 1/4" NPT fitting for 3/8" tube Complete with elbow fittings 5 pistons

    $665.99

  • Performance Metals Yamaha Trim Tab Anode - 150-225 hp - Aluminum [00125A] Performance Metals Yamaha Trim Tab Anode - 150-225 hp - Aluminum [00125A]

    Performance Metals Performance Metals Yamaha Trim Tab Anode - 150-225 hp - Aluminum [00125A]

    Yamaha Trim Tab Anode - 150-225 hp - AluminumUsed on Yamaha 2-stroke outboards: 150 hp (1988 and later), 175-200 hp (1988 and later), 225 hp (1990-1993). Also used on 4-stroke F150 (2004 and later).Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.Specifications: Weight: 0.6 lbs (0.3 Kg) Standard Pack - 10 What's Included? Mounting hardware Installation instructions *Replaces Yamaha # 6J9-45371-01

    $20.99

  • Performance Metals 3/4" Streamlined Shaft Anode - Aluminum [C0750A] Performance Metals 3/4" Streamlined Shaft Anode - Aluminum [C0750A]

    Performance Metals Performance Metals 3/4" Streamlined Shaft Anode - Aluminum [C0750A]

    3/4" Streamlined Shaft Anode - AluminumAluminum shaft anode with 2 halves and stainless steel hardware.Nuts are pressed into the casting and bolts are captured with plastic retaining washers for easy assembly.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.The anode includes the exclusive, patented “red spot” wear indicator.Dimensions: A - 3/4" (19mm) B - 2-1/8" (54mm) C - 2-1/8" (54mm)

    $9.99

Footer image

© 2025 REBELLION MARINE, Powered by Shopify

    Login

    Forgot your password?

    Don't have an account yet?
    Create account