XD Series Single 500 Amp Heavy Duty Battery Switch/Mechanical ContactorFeatures: Silver Alloy Contact Points support high ampere/full voltage switching capability versus legacy rotary style switches. Expandable: Integrate the 8700 XD Battery Disconnect easily with XD Series FLEX/ACR/LVD relays via using optional 8790 Link and 8791 Cross Link Busbars for easy integration with other Single, Dual, or Triple Circuit XD relays. Terminal Stud Protection: Included protective cover with convenient label recesses ensures no accidental shorts occur and allows for easy identification of circuits long term. Bullet-proof Construction: Sealed to IP67/IP6K9K, high-temperature electronics and materials allow mounting anywhere. Stainless steel cable lug studs. Large mounting holes accept 1/4-20 / M6 attachment hardware.  Intuitive Manual Control: Bright yellow knob and intuitively easy-to-read on/off label simplifies operation and awareness of the state of manual override and whether the device is being left in a locked off or locked on state. Ignition Protected: Safe for installation in gasoline-powered boats and other combustible installation environments. Sealed IP67 Construction keeps moisture out, and the integrated Gore-Tex pressure regulation vent increases its ability to operate reliably for long-term harsh environment operation.  Compact Case Design allows for easy surface mount or rear panel installs, and the rectangular shape (narrower than competing products) makes finding a mounting location easy. Specifications: Total Continuous Current Amps: 500 Max Cranking Current (Amps): 1500 Terminal Stud Size (mm): M10 Voltage Range (VDC): 8-36 Ingress Protection: IP67/IP6K 9K Contact Materials: Silver Alloy Focal Features:High Visibility KnobForce each individual relay Open or Closed and optionally leave knob in either position to lock relay in either condition. 40 Circuit Label Sheet IncludedConvenient recesses for included weatherproof label set makes circuit and relay identification easy. Blank labels for custom applications.Protective Cover IncludedProtects terminal studs and cable terminal edges from inadvertent shorts to each other or ground.Stainless HardwareCorrosion is no issue with quality stainless steel studs and self locking flanged nuts.Smaller FootprintXD Relays offers high Amp rating in a smaller package than competitive solutions, reducing install space requirements to a minimum.Integrated VentHigh quality Gortex vent regulates internal device pressure to eliminate moisture entry across seals and ensure long product life in harsh environments.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Sealink® Dual USB-A/C Combo ChargerThe Marinco Sealink USB-A/C Combo offers total charging flexibility. Compatible with 12V and 24V systems, and delivering up to 45W of total output, the charger charges electronics including cell phones, tablets, headphones & other devices. Mounting in a standard 1 1/8“ hole and featuring electrical tabs for quick wiring, the charger is easy to install. A weather-resistant cover protects against water and dust ingress, making it ideal for challenging environments.Features: Two USB Ports: (1) USB-A and (1) USB-C Mounts in a 1 1/8” hole Water resistant cap LED power indicator Applications: Marine RV Automotive Golf Cars Specialty Vehicles Industrial Equipment Quick Guide (pdf)

Read more less

TILE USB-A/USB-C Interior Charging Socket - 12/24V - Black BezelTILE Series offers sleek, high-performance charging solutions designed specifically for marine interiors. These chargers blend seamlessly into luxury marine environments. Featuring a compact 40mm (1.57”) footprint and requiring just a 29mm (1.14”) hole saw for easy installation, the TILE Series combines functionality and style, making it the ideal choice for modernizing your vessel’s interior. Enhance your boat’s space with this practical, sophisticated solution for charging your everyday devices.Tile USB is FAST! It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops and large tablets, phones, and any other USB-C-powered devices onboard.USB–C output60W max on 24V system, 36W max on 12V systemUniversalUniversal fit for any USB-C connectors. Fast charge (60W max) up to 2 devices at a time.Important informationTo maximize charge performance, use the cable supplied with your tablet, phone, etc. (C to C, or C-lightning) Phones charge at the same speed on either a 12 or 24V system, but a 24V system must be used to get the full 60W output suitable for laptops.WARNINGTILE USB products are designed for interior use only. Do not install in locations where water exposure is possible, as this may lead to product failure.Features: 12V & 24V  USB-A and USB-C Ultra-low profile Front fit Tiny footprint Available in 316 stainless steel or matte black Conformal coated electronics, protected against moisture Modernize your boat's interiors Specifications: Input Voltage Range: 10-32V DC (12/24V system) Input current max: Max 6A (10A fuse recommended)  Output (Type C): 12V System: 5V=3A, 9V=3A, 12V=3A Max, 24V System: 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3A Max Output (Type A): 12V System: 5V=3A, 9V=3A, 12V=3A Max, 24V System: 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3A Max Standby Power: 0.01W Certification: CE, FCC, UKCA, C-Tick, ROHS, WEE

Read more less

Replacement Key for 701This replacement knob replaces the existing knob for the 701 switch.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Ventura Series Anderson 50A Solar ConnectionWhether you're running solar into your camper's power system, charging lithium batteries in your overland rig, or connecting high-draw gear at basecamp, this Anderson 50A connection keeps your power flowing, no fuss, no compromise.Working seamlessly with the rest of the Ventura Series, integrating power, water, solar, and more into a single, cohesive design language.The Ventura Series Anderson 50A Solar Connection is your rugged, ready-for-anything power port perfect for serious off-grid setups.Designed for outdoor life, this fixed, heavy-duty connector won’t work loose. Its robust design and optimal cable sizing ensure a secure fit and reliable performance, even at higher voltages.Crafted with Scanstrut marine-grade innovation, it’s built to thrive in tough environments. UV-tested, waterproof (IP68 & IP69K), and made with 316 stainless steel components, it’s built to last - rain, dust, heat, or snow.The Ventura Series blends beautiful design with tough practicality. Its compact and uniform look complements the range of exterior sockets like power, water, and solar, keeping your build clean and cohesive. From remote trails to rugged coastlines, keep your setup powered and adventure-ready with the Scanstrut Ventura Series Anderson 50A.Features: IP68, IP69K Waterproof (with lid closed) Built-in gaskets for a watertight seal Spring-Loaded Lid Marine-Grade 316 Stainless Steel Components 90° Holding Bump-Feature UV Resistant Easy install Terminal Crimps Specifications: Connection Type: Anderson SB50 - Red Connector Max Current: Rated 50A (6AWG cable) Connector Max Voltage: Rated 600V DC Max Power Delivery (12V Input): 600W Max Power Delivery (24V Input): 1200W Max Power Delivery (48V Input): 2400W SB50 terminal crimps are not included. Waterproof Rating: IP68, IP69K Front only when lid closed Certification: CE, ROHS *SB50 terminal crimps are not included. Genuine crimps are available from Anderson Power Specifications: Type: Electric Box Dimensions: 3"H x 3"W x 5"L WT: 0.2 lbs UPC: 5060114799486 Quick Guide (pdf)Brochure (pdf)

Read more less

4365 Water Resistant USB Accessory Panel - 15A Circuit Breaker, 12V Socket, 2x 2.1A Dual USB ChargersEasy to install accessory panels include a 15A circuit breaker switch and pre-wired harness. Panels offer customizable 12V charging and monitoring options.Features: Pre-wired harness included in all panels for easy installation Silicon breaker boots and gasket protects against water ingress Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only Specifications: Positions: 1 Nominal Voltage: 12V DC

Read more less

12V Stainless Steel Power SocketThe power socket with the plate is ideal for installing additional power outlets. Features: Constructed of stainless steel sockets with a stamped 304 stainless steel mounting plate Installs with two #8 RH fasteners (not included) Specifications: Maximum: 12VDC, 16A.     Socket Material: Stainless steel socket and molded cap  Distance Between Mounting Holes: 1-11/16 in. Height (not including the plate): 1-1/8 in. Fastener: #8 RH     Weight: .12 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Round Red LED Temperature MeterThe temperature meter includes a prewired temperature sensor with a 6-foot cable and it monitors temperature on a bright LED screen. Features: Reverse polarity protected The same compact round size as a standard 12VDC receptacle, this temperature meter supports many installation options Constructed of injection-molded nylon Installation is as easy as drilling a 1-1/8-in. hole, inserting the socket body, tightening the locking nut, and connecting the wires IP67 waterproof rating 12-24VDC Specifications: Diameter: 1-7/16 in. Length: 1-1/16 in. Height: 1-1/8 in. Volts: 12-24 Temperature Range (Fahrenheit): -67 degrees to 248 degrees  Weight: .02 lb. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Ventura Series 12V Power OutletThe Ventura Series 12V Power Outlet is here to power your adventures, delivering a compact, clean, unified look for your exterior connections.Working seamlessly with the rest of the Ventura Series, integrating power, water, solar, and more into a single, cohesive design language.Power Up Your Outdoor AdventuresWith its compact, rugged design, the Ventura 12V Power Outlet makes it easy to plug in portable tire compressors, cool boxes, inverters, and more, wherever your journey takes you. Whether you're at the beach after an epic surf session or in the mountains after a thrilling trail ride, you’ll always have reliable power at your fingertips. Just park, lift the waterproof lid, and plug in. It’s that simple.Built for DurabilityDesigned with Scanstrut's renowned marine engineering expertise, Ventura outlets are rigorously tested for UV exposure and waterproofing. Featuring marine-grade 316 stainless steel components, they deliver long-lasting performance in the harshest environments.InstallationStandard 32mm (1.25”) holesaw installationFeatures:  IP68, IP69K Waterproof (with lid closed) Premium click-to-close design Spring-loaded lid Marine-Grade 316 stainless steel hardware Built-in gasket for a watertight seal Easy install Specifications: Input Voltage (12V System Only): 10-15V DC Input current max: 10A Output Max: 150W Standby Draw: 0.01W Waterproof Rating: IP68, IP69K Front only when lid closed Certification: CE, ROHS, WEEE Specifications: Type: Electric Box Dimensions: 3"H x 3"W x 5"L WT: 0.2 lbs UPC: 5060114799462 Quick Guide (pdf)Brochure (pdf)

Read more less

Universal AC Plug - BlackNo need to cut, strip or splice wires! Mount in an easy-to-reach location for safe AC power cord connection. Watertight and UV resistant cover.Features: Converts plug holder to an AC inlet for ProMariner engineered chargers No cutting, stripping, or rewiring of AC power cord Watertight and UV resistant cover Easy to reach safe AC power cord connections Stainless steel mounting screws included

Read more less

Ventura Series Dual AC Outlet - 125V - 20AEnjoy the convenience of a dual 125V 20A AC outlet right on the exterior of your vehicle. Designed for outdoor reliability, the Scanstrut Ventura Series keeps you powered no matter where your journey takes you.Need quick access to dual 125V AC power on your boat? The Scanstrut Dual 125V 20A AC Outlet is built for seamless, reliable outdoor performance.With its compact, sleek design, this outlet delivers instant mains power, perfect for running portable Starlinks, blending cocktails, or making smoothies while out on the water.Designed for effortless use, simply lift the waterproof lid and plug in for instant connectivity.Crafted with Scanstrut marine-grade innovation, these sockets undergo rigorous UV exposure and waterproof testing (IPX6-rated). Built with 316 stainless steel components, they promise durability and performance in any environment.Upgrade your boat with a refined, high-performance power solution exactly where you need it.Features: IP68 & IP69K waterproof (with lid closed) Cover Sprung to Fully Open 180° 90° Holding Bump Feature Premium click-to-close design Marine-grade 316 stainless steel hardware Durable matte black plastics Built-in gaskets for a watertight seal Corrosion-resistant design Commercial-grade receptacle included Built-in strain relief Compatible with flat and round cables Mounting Gasket UV Resistant Specifications: Rating: 20A, 125V Cable: 12AWG Triplex Recommended; Copper cable must be used for installation Receptacle: Replace the receptacle only with Scanstrut P/N SC-UTIL-P-006285 (Qualtek 740W-F/06) Certification: ROHS Specifications: Type: Electric Box Dimensions: 3"H x 5"W x 5"L WT: 0.5 lbs UPC: 5060114799295 Brochure (pdf)

Read more less

1014 Mounting Bracket f/1011 12V SocketSocket not includedFeatures: Designed to withstand the rigors of wet environments and constant vibration Large contact surfaces for good electrical connection Twist lock system - plug locks securely into socket Internal strain relief and cord seal Nickel plated copper alloy used for all current carrying components Front panel, rear panel, or surface mount WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Ventura Series Dual USB-C SocketThis high-performance USB-C power solution keeps your phones, laptops, tablets, outdoor lights, fans, speakers, cameras, and more fully charged without the hassle of running cables inside your vehicle.Working seamlessly with the rest of the Ventura Series, integrating power, water, solar, and more into a single, cohesive design language.The Scanstrut Ventura Series Dual USB-C Socket is built for adventure, offering reliable, seamless power in any outdoor environment.This high-power USB-C socket ensures you can charge devices and expand your liveable space. Whether you're working remotely by the beach or powering gear after a mountain hike, you'll have instant access to reliable power right outside your van.No more running inside every time you need to charge. Minimize clutter, reduce dirt inside your vehicle, and eliminate messy extension cords.Built for Durability & Performance: IP68 & IP69K waterproofing and UV protection withstand harsh weather and outdoor conditions Marine-grade 316 stainless steel components ensure long-lasting resilience Engineered with Scanstrut marine expertise, the Ventura Series provides uniform exterior connections for USB power, water, solar, and more. Features:  IP68, IP69K Waterproof (Cover Closed) Built-in gasket for a watertight seal Spring-loaded lid 90° Holding Bump-Feature Easy install Standard 32mm (1.25”) Hole Saw Installation Specifications: Input Voltage 12/24V System: 10-32V DC Input Current Max: 6A Output Type C 12V System: 5V=3A, 9V=3A, 12V=3A Max Output Type C 24V System: 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3A Max Standby Draw: 0.01W Waterproof Rating: IP68, IP69K Front only when lid closed Certification: CE, ROHS, FCC, C-Tick, WEEE Specifications: Type: Electric Box Dimensions: 3"H x 3"W x 5"L WT: 0.2 lbs UPC: 5060114799479 Quick Guide (pdf)Brochure (pdf)

Read more less

VE.Can RJ45 Terminator - Bag of 2This bag contains two VE.Can RJ45 terminators. The terminators are included with some other Victron products, for example, the CANUSB.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Package Qty: Two Box Dimensions: 1"H x 1"W x 11"L WT: 0.1 lbs UPC: 8719076019923 Quick Guide (pdf)

Read more less

EasyView 5Waterproof system monitor with daylight display and intuitive touch control.Controlling your Mastervolt system has never been easier. The EasyView 5 features a sharp, waterproof display which is clearly readable in daylight. Thanks to the color touch screen and multi-language menu, the display is a pleasure to operate. Easily customizable favorite pages show all relevant system information at a glance.Features Water proof, daylight readable color display Intuitive touch control Customizable favorite pages Log book for warnings and alarms Buzzer and Home button Easy mounting: Front mount, wall mount or retrofit MasterBus powered or MasterBus powering by 12 V DC input Easy updating through integrated USB ApplicationsThe EasyView 5 completes any MasterBus system. Applications include yachts, vehicles and stationary systems. Markets include marine, mobile (recreational & professional), infra-structure, offshore, off-grid and industrial markets.Specifications Display: 4.5 inch high contrast display with capacitive touch control. Resolution: 480x272 pixels, Color depth: 16 bits Languages: English, Dutch, German, Spanish, Italian, French, Finnish, Swedish, Norwegian, Danish IP degree: IP65 waterproof front Power supply: MasterBus powered or MasterBus powering through 12/24 V input Power Consumption: < 160 mW (idle mode) Alarm: Buzzer integrated Connections: 2 x MasterBus, USB, 12/24 V auto ranging input for optional external power Mounting: Front mount, wall mount and MasterView Easy retrofit Dimensions, HxWxD: 113 x 127 x 43 mm WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)

Read more less

Relay 12V 150A with ResistorThis is an automotive-rated relay/industry standard drop-in replacement for Tyco/Amp. The relay switch carries high-amp electrical currents in high ambient temperatures/wet environments.Features:Delphi Metripak connector built-in to the enclosure (sealed enclosure)Specifications: Continuous Current @85C (Amps): 180 Intermittent Current @85C (Amps): 240 Minimum Operate Voltage (VDC): 7.2 On-State Current Draw @12V (mA): 325 Release Voltage (VDC): 2.2 Switching Current @13.5 VDC (Amps): 300 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

70A Trolling Motor ReceptacleIncreased amperage for modern trolling motors.Features: 70A continuous rating Sealed, waterproof connection Integrated strain relief Keyed design with thumbprint locator Accepts up to 6AWG wire WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

TILE USB-A/USB-C Interior Charging Socket - 12/24V - Stainless Steel BezelTILE Series offers sleek, high-performance charging solutions designed specifically for marine interiors. These chargers blend seamlessly into luxury marine environments. Featuring a compact 40mm (1.57”) footprint and requiring just a 29mm (1.14”) hole saw for easy installation, the TILE Series combines functionality and style, making it the ideal choice for modernizing your vessel’s interior. Enhance your boat’s space with this practical, sophisticated solution for charging your everyday devices.Tile USB is FAST! It will charge at 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops and large tablets, phones, and any other USB-C-powered devices onboard.USB–C output60W max on 24V system, 36W max on 12V systemUniversalUniversal fit for any USB-C connectors. Fast charge (60W max) up to 2 devices at a time.Important informationTo maximize charge performance, use the cable supplied with your tablet, phone, etc. (C to C, or C-lightning) Phones charge at the same speed on either a 12 or 24V system, but a 24V system must be used to get the full 60W output suitable for laptops.WARNINGTILE USB products are designed for interior use only. Do not install in locations where water exposure is possible, as this may lead to product failure.Features: 12V & 24V  USB-A and USB-C Ultra-low profile Front fit Tiny footprint Available in 316 stainless steel or matte black Conformal coated electronics, protected against moisture Modernize your boat's interiors Specifications: Input Voltage Range: 10-32V DC (12/24V system) Input current max: Max 6A (10A fuse recommended)  Output (Type C): 12V System: 5V=3A, 9V=3A, 12V=3A Max, 24V System: 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3A Max Output (Type A): 12V System: 5V=3A, 9V=3A, 12V=3A Max, 24V System: 5V=3A, 9V=3A, 12V=3A, 15V=3A, 20V=3A Max Standby Power: 0.01W Certification: CE, FCC, UKCA, C-Tick, ROHS, WEE

Read more less

MasterBus Cable - 0.5M Suitable for data traffic and powering peripheral equipment, this is the only cable you need for your MasterBus network. MasterBus compatible products come standard with two ports, while other equipment requires an interface.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Phoenix Inverter Control f/ VE.Direct InvertersThis panel is intended for all VE.DIRECT Phoenix Inverters.The panel connects to the inverter's remote on/off (H/L) port via two wires, not provided.*Sold as an IndividualPlease contact your dealer for any returns, repairs or support issues related to this product. Specifications: Color: Grey Type: Switches Box Dimensions: 2"H x 4"W x 5"L WT: 1 lbs UPC: 8719076041344 Quick Guide (pdf)Brochure (pdf)

Read more less

Universal DC Cable Extender - 5'Universal design for all marine chargers with ring terminal cables. No cutting, stripping or splicing required.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Carry Case for BlueSmart IP65 Chargers & AccessoriesSmart and professional; this new snap shut carry case provides protective stowage and easy transport for your Blue Smart IP65 charger, and its accessories.Compartments accommodate the charger, its input/output cables; plus the battery-clamp/eyelet cable options.*Charger and accessories not includedWarranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Type: Chargers Box Dimensions: 4"H x 12"W x 14"L WT: 1.95 lbs UPC: 8719076046554 Quick Guide (pdf)Brochure (pdf)

Read more less

Grey 12 AWG Wire Ferrule - 10mm Length - 25 PackWire fraying can quickly become a problem when dealing with IEC (European)-style terminal blocks. As the wire frays, the connection becomes weaker, and the problem will need to be addressed. But all that can be prevented. How? By utilizing wire ferrules. Wire ferrules are a type of terminal that prevents wire fraying. It covers the stranded wire and creates a solid, connected piece. In a sense, wire ferrules make stranded wire behave like solid wire. This is important, especially when working with IEC terminal blocks.How are wire ferrules properly used? The first step is to strip the wire to the correct length. Now slide the ferrule over the exposed wire. Make sure that the nylon casing butts up to the wire insulation. Once set, crimp using the proper tool. Using the proper tool is important, as, without the proper pressure, the wire may not create a solid connection. Proper crimping pressure and technique are key to ensuring continued performance. Once properly crimped, users can add heat shrink for added protection if they choose. Features: Prevent strand separation while minimizing strand breakage Insulated ferrules provide additional electrical insulation Increase connection reliability when terminating stranded wire in terminal blocks Specifications: Package Size: 25 Wire Size (AWG): 12 Insulation Color: Grey Ferrule Length: 10mm (0.39 in.) Stripping Length: 12mm (0.47 in.) Quick Guide (pdf)

Read more less

Red 16 AWG Wire Ferrule - 8mm Length - 25 PackWire fraying can quickly become a problem when dealing with IEC (European)-style terminal blocks. As the wire frays, the connection becomes weaker, and the problem will need to be addressed. But all that can be prevented. How? By utilizing wire ferrules. Wire ferrules are a type of terminal that prevents wire fraying. It covers the stranded wire and creates a solid, connected piece. In a sense, wire ferrules make stranded wire behave like solid wire. This is important, especially when working with IEC terminal blocks.How are wire ferrules properly used? The first step is to strip the wire to the correct length. Now slide the ferrule over the exposed wire. Make sure that the nylon casing butts up to the wire insulation. Once set, crimp using the proper tool. Using the proper tool is important, as, without the proper pressure, the wire may not create a solid connection. Proper crimping pressure and technique are key to ensuring continued performance. Once properly crimped, users can add heat shrink for added protection if they choose. Features: Prevent strand separation while minimizing strand breakage Insulated ferrules provide additional electrical insulation Increase connection reliability when terminating stranded wire in terminal blocks Specifications: Package Size: 25 Wire Size (AWG): 16 Insulation Color: Red Ferrule Length: 8mm (0.31 in.) Stripping Length: 10mm (0.39 in.) Quick Guide (pdf)

Read more less

Green 6 AWG Wire Ferrule - 12mm Length - 10 PackWire fraying can quickly become a problem when dealing with IEC (European)-style terminal blocks. As the wire frays, the connection becomes weaker, and the problem will need to be addressed. But all that can be prevented. How? By utilizing wire ferrules. Wire ferrules are a type of terminal that prevents wire fraying. It covers the stranded wire and creates a solid, connected piece. In a sense, wire ferrules make stranded wire behave like solid wire. This is important, especially when working with IEC terminal blocks.How are wire ferrules properly used? The first step is to strip the wire to the correct length. Now slide the ferrule over the exposed wire. Make sure that the nylon casing butts up to the wire insulation. Once set, crimp using the proper tool. Using the proper tool is important, as, without the proper pressure, the wire may not create a solid connection. Proper crimping pressure and technique are key to ensuring continued performance. Once properly crimped, users can add heat shrink for added protection if they choose. Features: Prevent strand separation while minimizing strand breakage Insulated ferrules provide additional electrical insulation Increase connection reliability when terminating stranded wire in terminal blocks Specifications: Package Size: 10 Wire Size (AWG): 6 Insulation Color: Green Ferrule Length: 12mm (0.47 in.) Stripping Length: 14mm (0.59 in.) Quick Guide (pdf)

Read more less

PC-10 Power Conditioner Noise FilterThe interference or electronic “noise” generated by alternators, ignition systems, motors, etc. can render a vehicle or vessel’s radio or other electronic equipment virtually useless. This interference takes the form of popping or static on radios or audio gear and garbled images or “hashes” on video displays.These specialized filters can be used singly or in combination to attenuate conducted line noise, either at the affected equipment or at the noise source.Features: Heavy-duty aluminum construction Operate on 6-48 VDC systems Integral mounting flanges for secure installation Nickle-plated, brass stud connectors on alternator filters accommodate high-current cables and terminals Color-coded wire leads on PC models make in-line installation easy Specifications: Filtered Frequencies: Audio – 200 MHz Rating: 10 amp Installation Location: At affected equipment in “+” and “-” leads     Dimensions (inches): 1.25 x 4.25 x 3 Weight (lbs): 1

Read more less

APS-160 Automatic Power Selector - 160AThe Automatic Power Selector (APS) is a solid-state device that enables the installation of a seamless, redundant power system for critical electronic loads. It selects the higher voltage of two independent DC power sources and routes power to the load. Should one source falter or fail, the other will automatically supply the load with no transfer delay, and the operation continues uninterrupted.Two independent power sources are wired to the APS and routed as a single output to the vital load. Alarm sense wires can be easily attached to input studs, providing a loss of power source signal. Features: Easy installation Rugged, rust-proof anodized aluminum case Specifications: Max Loads: 160 amps Voltage Rating: 6 – 50 VDC, neg. ground Stud Terminal Size: 6mm Dimensions (inches): 9.0 x 4.5 x 3.1 Weight (lbs): 5

Read more less

BlueSolar Charge Controllers MPPT 100/30A solar charger gathers energy from your solar panels and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.Ultra-Fast Maximum Power Point TrackingBy constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.Remote Monitoring & ControlRemotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a Bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520.Please contact your dealer for any returns, repairs or support issues related to this product. Brochure (pdf)

Read more less

Ve.Direct Cable - 0.9MVictron Energy VE Direct to USB interface cable. For use with BMV700 and BMV702 Energy meters, most MPPT solar charge controllers, and the Color Control GX. Available in a variety of lengths, this cable connects the Color GX to its energy meters and solar charge controllers. The Color Control GX has two ports that take this cable.Please contact your dealer for any returns, repairs or support issues related to this product.

Read more less

GX Touch 50 Surface Mount Display - 5"Panels & System MonitoringThe GX Touch 50 is the display accessory for our Cerbo GX. The five inch a touch screen display gives an instant overview of your system and allows you to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable, its super slim, waterproof design, top-mountable setup, and its simple installation bring a lot of flexibility when creating a crisp and clean dashboard. Simply MountedThe GX Touch is optimised to more than meet the standards of installer professionals. The screen is simply bolted on top of a dashboard, eliminating the need to create perfect cut-outs (like with the ColorControl GX) and is connected through just one cable, taking away the hassle of having to bring many wires to a dashboard. The GX Touch 50 is a companion to the Cerbo GX, the all-new communication-centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Simply connect through our Victron Remote Management (VRM) portal, or access directly, using the GX Touch 50, a MFD or our VictronConnect app thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

1046 48V Dual USB Charger Socket MountIntelligent device recognition maximizes charge rate for phones, tablets, or other mobile devices.Features: Ideal for golf carts and other 48V systems Spring-hinged lid keeps debris and moisture out Charges at the speed required by specific devices Internal filtering for reduced electronic interference Over temperature protection Conformal coated circuit board for the harsh marine environment Mounts in a common 1-1/8" hole Specifications: Max Output Current: 4A DC (total) Input Voltage: 48V DC Input Voltage Range: 32-64V DC Reverse Polarity: Yes Short Circuit Protection: Yes Thermal Overload Protection: Yes USB: 2.0, Type A

Read more less

1811Features: Accurate - used with the Vessel Systems Monitor VSM 422 PN 1800-can be precisely calibrated for each tank* Reliable - SSI Technologies, Inc. Fluid-Trac® is non-contacting eliminating any mechanical moving parts that can wear and cause intermittent or complete signal loss Digital filtering - Eliminates errors due to liquids sloshing in mobile tanks * Calibrated for use with Blue Sea Systems Vessel Systems Monitor VSM 422 only WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

PowerGuard PRO Battery BoxExperience the difference between PowerGuard PRO Series Battery Protection Upward-facing vents let gases out while reducing water in-take by 94% - vs. PowerGuard 27 Series Polypropylene composite material is impervious to acid leaks and other external factors Engineered spill channels direct water away from the battery With PowerGuard PRO, the battery is always within reach Folding entry panels provide easy access to the battery terminals without the need to remove the mounting strap A versatile bidirectional design allows contact from any angle Ergonomic handles provide more comfort when transporting the battery PowerGuard PRO takes security seriously Reinforced mounting hardware ensures the battery and box stay anchored Spacer blocks are removable to fit Group 24, 27, and 31 batteries The snap-locking lid gives confidence that the battery will remain secure Specifications: Dimensions with Lid Installed - Internal Dimensions (L x W x H): 13-1/8" x 7" x 11" Outside Dimensions (L x W x H): 21" x 11-1/4" x 11-1/2" Color/Style: Black/Vented Quick Guide (pdf)

Read more less

Active 15W Wireless Adjustable Phone Charging Mount - 12/24VDock. Charge. Connect.Active 15W securely holds and wirelessly charges your phone even in the toughest conditions. Now you can keep your phone within reach, fully charged, and ready to go.The IPX6 waterproof 12/24V Qi-certified waterproof wireless charging range enables wireless charging for the outdoor environment, without the need for phone charging cables. Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use onboard, with the unique technology housed in an IPX6, fully encapsulated and sealed unit.Perfect for boat consoles or any vehicle working outside in the elements, the simple one-handed operation allows you to easily dock your phone and instantly start charging. No connection is needed.The high-grip, self-aligning jaws ensure your phone is held tightly and in the optimum charging position every time.Featuring Qi-certified wireless charging technology and a “Smart” LED that indicates when your phone is charging. Throw in foreign object detection and thermal cut-off and you’re guaranteed safe, reliable charging in all environments.Compatible with wireless charging-enabled phones of all sizes from all major brands including Samsung, Apple, and many more. Charging is also possible through non-metallic, waterproof cases.Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments.With the same great look, Active 15W is tried and tested in all corners of the globe in all weathers, and conditions.TestingActive has been subjected to our harshest environmental, vibration, impact, and on-water testing programs. This is combined with our world-renowned expertise in waterproofing technologies, UV stabilization techniques, and premium-grade materials to ensure Active is the best and only choice to make when it comes to mounting and wirelessly charging your phone outdoors.InstallationInstallation is simple on any boat, RV, ATV, or outdoor location. Four screws secure the unit onto any flat surface with a simple installation guide and drilling template. A waterproof cable pass-through completes the IPX6 sealed installation. The charger is easy to clean and can be washed down with fresh water.Features:  15W Fast Charging IPX6 Waterproof Qi Certified Mount & charge High friction grip Single-handed docking Specifications: Input Voltage Range: 10-30V DC (12/24V system) Input current max: 2A Output Power: 5W/7.5W/10W/15W (dependant on phone model) Standby Power: Input Voltage (V) 12/24, Standby Power (W) <0.9W, <1.1W Cable AWG: 20 AWG Cable Length: 500mm (19.69") Certification: Qi, CE, FCC, ROHS, E24, C-Tick, PSE Certified

Read more less

Round Dual USB/USB-C ChargerThis Round Dual Charger provides reliable power for smartphones, tablets, and other USB devices while maintaining a compact, low-profile installation. Ideal for boats, RVs, or other mobile setups, it ensures safe, consistent charging in harsh environments.The charger’s robust construction and waterproof design make the Round Dual USB/USB-C Charger a long-lasting, high-performance solution for modern multi-device power needs.Specifications: Mounting Type: Double D Current Rating: 4.8A (32VDC) USB-C: 45w Fast Charger (4.0) Specifications: Type: Electric Box Dimensions: 2"H x 4"W x 7"L WT: 0.1 lbs UPC: 810196332065

Read more less

ROKK Charge Pro Fast Charge USB-A & USB-C SocketROKK Charge Pro is the ultimate onboard USB charger. Featuring a USB-A and USB-C charging port housed in an IPX6 waterproof design, this is the only USB-C charger on the market that remains waterproof while in use.Say hello to fast charging! The unique design charges up to 36W on 12V systems and 60W on 24V systems. This makes it ideal for charging modern laptops via the USB-C port. It's also twice as fast when charging larger tablets, designed to easily charge an iPad Pro and iPhone at the same time.Perfect for where space is at a premium, ROKK Charge Pro has a sleek, ultra-compact design with a click-and-lock lid allowing the USB to remain waterproof while in use. Constructed from premium, marine-grade materials, ROKK Charge Pro is IPX6 waterproof making it completely wash-down ready.USB – C output: 60W max on 24V system 36W max on 12V system USB – A output:36W maxThe install cut-out matches those of standard USB sockets for easy retrofit or swap of an existing USB charger, allowing you to keep up with the heavier power draws of modern electronic devices.Universal: Universal fit for any USB-A or USB-C connectors  Fast charge (60W max) up to 2 devices at a time. Easy Install, using standard USB mounting hole - 29mm (1 1/8”) Washdown Proof:IPX6 waterproof with the lid closedMarine Ready: Anti-corrosion coating on the circuit board  UV resistant  316 stainless hinge and spring Electrical Information: Input voltage: 10-30V DC (12/24V System) Input current Max: 6A (10A fuse recommended) Standby power draw: 0.01W The charge cable supplied with your device (tablet, phone, action camera, etc) must be used to achieve maximum charge performance from this charger. Phones will charge at the same speed whether on a 12V or 24V input voltage system. However, a 24V system must be used to get the full 60W output suitable for fast-charging laptops. Brochure (pdf)

Read more less

DC-DC Converter - 12/36V - 20AYour boat has a 12V alternator, and you need to charge a 24V or 36V battery “on the run”? Dolphin has the solution. Our boosters are true DC/DC chargers with a 3-stage smart charge feature. Compatible with 4 different technologies, including Gel, AGM, or Lithium LIFEPO4. Dolphin booster is the perfect choice to charge your bow thruster or trolling motor batteries!Flexibility & VersatilityBOOSTER units are designed to charge a 24V, 36V, or 48V auxiliary battery from a single 12V or 24V power system, ideal for new installations or for updating older systems. Thanks to recharging during navigation, auxiliary batteries are always available. No need to wait until you’re connected to the shore to recharge. This product range extends from 12/24V (charging at 30A), 12/36V (charging at 20A) up to 24/48V (charging at 15A).Efficient Power ConversionSmall is beautiful: our engineers have made it compact. BOOSTER is only half the size of a conventional charger of equivalent power!Faster Charging TimesBOOSTERS are intelligent marine battery chargers featuring an advanced and unique 4-stage charging program. This reduces charging time by 50% compared with charging from a basic alternator. with different battery chemistry settings (Lead, Gel, AGM, Lithium, LifeFO4).Compatibility with Different VoltagesBOOSTERS are smart battery chargers featuring four different battery profile, Lead, Gel, AGM, and Lithium LifeFO4.Protection FeaturesBOOSTER units include automatic protection against battery source drainage, over-current, over-voltage and reverse polarity and built-in fuses protections.As for all other Dolphin® charger products, the BOOSTER’s assembly process includes conformal coating of the electronic board (PCB) to guarantee an extended lifecycle of your battery charger. Quick Guide (pdf)

Read more less

Motor Reversing ModuleThe forward and reverse module automatically reverses the direction of the motor when the appropriate control circuit is energized with a pulse from a control switch. Dynamic breaking stops the motor when the switch returns to Off. Ideal for tarp or lift applications as well as for use on hoists, hatches, winches, snowplows, intake/exhaust fans, vehicle outriggers, and other reversing applications. Low-profile module saves space. Studs are securely anchored in epoxy. Tin-plated brass studs and hardware for corrosion resistance. Quick Guide (pdf)

Read more less

3131 Surface Mount Circuit Breaker EnclosureSurface mount option for mounting single and double pole circuit breakers Surface mount box for mounting single and double pole circuit breakers Accepts A-Series toggle and A and C-Series Flat Rocker Circuit Breakers Accommodates optional LEDs and square format labels Wire glands and fasteners are included WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Dual USB/USB-C 12V Combo Receptacle with PlateThis USB/USB-C & 12V Combo unit combines a 12V socket with both USB-A and USB-C ports, offering maximum flexibility for marine and mobile charging. It supports a wide variety of devices and accessories, making it the perfect upgrade for boats needing modern charging options in a compact footprint.Built for durability, the USB/USB-C & 12V Combo delivers consistent power even in harsh marine conditions. Its compact design allows for clean, easy installation on dashboards, consoles, or control panels, making this charger a versatile and reliable choice for powering multiple devices on any vessel.Specifications: Mounting Type: Double D Current Rating: 4.8A (32VDC) No LED Quick Guide (pdf)

Read more less

ROKK 10W Edge Wireless Phone Charging MountThe IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment without needing phone charging cables.  Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique technology housed in an IPX6, fully encapsulated and sealed unit.Right up to the Edge - with the smallest footprint, Edge now means you have even more choice of how and where you install your phone mount and charger combo.  Crowded consoles, side-mounting, and flat and vertical surfaces are all suitable.Put your phone on its Edge - Rotate it from portrait to landscape to view your favorite navigation app or simply fine-tune the position for the optimum viewing angle.12/24V and IPX6 waterproof, ROKK Wireless – Edge is perfect for boat consoles tight on space or any vehicle working outside in the elements, with the simple one-handed operation you can easily dock and instantly start charging your phone.  No cable is required.The self-aligning, high-grip jaws accommodate all wireless charging phones and securely hold your device in the optimum charging position every time.  Couple this with the innovative adjustable body of Edge and you’ll have your phone fully charged, right where you need it.Install Edge 10W on any surface: a secure 3-point fixing system and a footprint of just 50mm (1.96”) diameter maximize your choice of location and a watertight cable pass-through completes the install.Our upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps.Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments.With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions.Featuring Qi-certified wireless technology and a “Smart” LED that indicates when your phone is charging.  Throw in foreign object detection and thermal cut-off and you’re guaranteed safe, reliable charging in all environments.  Charging is also possible through non-metallic, waterproof cases. Case Compatibility:ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm)Features: Install Edge on any surface - a secure 3-point fixing system and a footprint of just 50mm (1.96”) diameter maximize your choice of location and a watertight cable pass-through completes the install. Compatible with all Qi Wirelessly charging electronics. Includes a “Smart” LED that indicates when your phone is charging.  Throw in foreign object detection and thermal cut-off and you’re guaranteed safe, reliable charging in all environments.  Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max - 2A   Output Power - 10W (9V,1A) IPX6 Waterproof Qi-certified wireless charging Protection - UV Resistant Dimensions (H x L) - 7.71" (196mm) x 3.7" (94mm) In the Box: Charger/Mount Instruction manual  *Sold as an Individual Specifications: Type: Chargers Box Dimensions: 3"H x 6"W x 7"L WT: 1.1 lbs UPC: 5060114797949 Quick Guide (pdf)

Read more less

Connect Charge InletProduct Features For use with the Guest Connect Charge plug Exclusive molded notch on plug locks into inlet, eliminates rewiring Mounts from the rear using locking ring or from the front with 3 screws Low profile cap won't catch fishing line Can be mounted almost anywhere on a boat Mounts easily to fiberglass and aluminum hulls Black WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

AC Universal Plug Holder - WhiteFeatures: White AC Universal Plug Holder is designed for all standard 120V AC plugs Plug clamp insert included - converts plug holder to an AC inlet for battery chargers No cutting, stripping, or rewiring of AC power cord Watertight and UV resistant cover Stainless steel mounting screws included Easy to reach safe AC power cord connections

Read more less

Temperature SensorDolphin Charger Temperature Sensor for Pro Chargers and Bat View.

Read more less

XD Series Single Flex 2 Relay-ACR with Knobs - DTM ConnectorThis Egis relay provides a 35-75% reduction in mounting space and product weight via advanced bi-stable solenoid design and multiple solenoid assemblies that replace common electrical system layouts. The relay is expandable with link and cross-link busbars to additional dual, triple, or single XD relays. Also, the relay supports 2 or 3 battery systems with standard busbar interconnect accessories.Applications:  Improved replacement/alternative to legacy solenoids and remote battery switches; Wire-for-wire compatible with Blue Sea ML-solenoid and ML-remote battery switch products Forward-facing input studs make landing large wires easily, and a protective cover with integrated label recesses enables easy identification while providing anti-contact short protection Features: Bullet-proof construction, sealed to IP67/IP6K9K, and high temperature electronics and materials allow mounting anywhere; Stainless steel cable lug studs; Large mounting holes accept 1/4-20 / M6 attachment hardware The intuitive manual control option simplifies operation and increases awareness of the state of the manual override and whether the device is being left in a locked-off or locked-on state (not available on competitive solutions) Simple programmability via simple dip switches allows each relay function significant flexibility for OEMs and installers Plug-and-play compatible with Legacy competitor products: Single, dual, and triple relay options are available with DTM/ATM connector pins for pin compatibility with ML Series bi-stable relays 90-95% less off-state current compared to competitive products and system solutions that require multiple devices for similar functionality Specifications: Total Continuous Current Amps: 500 Max Cranking Current (Amps): 1500 Mechanical Switching Life: 1,000,000 cycles Voltage Range (VDC): 8-36 Off-State Current Draw (mA): 1.3 State Change Current: 5A @ 12 VDC; 3A @ 24 VDC Focal Features:Led Status DisplayThe easy-to-see front-facing LED indicator provides visual device status, and the remote LED replicates the local on-device LED. 3-Position Manual OverrideForce each relay open or closed, and optionally leave the knob in either position to lock the relay in either condition. 40 Circuit Label Sheet IncludedConvenient recesses for the included weatherproof label set make circuit and relay identification easy. Blank labels for custom applications. Protective Cover IncludedProtects terminal studs and cable terminal edges from inadvertent shorts to each other or ground. Stainless Hardware Corrosion is no issue with quality stainless steel studs and self-locking flanged nuts.ProgrammableVia dip switches located under the protective cover. An easy-to-use configuration guide on the reverse makes custom settings a breeze to configure for a wide variety of applications. Smaller FootprintXD relays offer a high amp rating in a smaller package than competitive solutions, reducing installation space requirements to a minimum. Integrated VentHigh-quality Gortex vents regulate internal device pressure to eliminate moisture entry across seals and ensure long product life in harsh environments.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

XD Series Triple Flex 2 Relay-ACR-Relay with Knobs & Tinned WiresThe Egis relay replaces three individual high-amp relays with one compact module, reducing space significantly, eliminating the cost of external link cable connections, eliminating the risk of link cable connections vibrating loose, and providing clear, unambiguous awareness of how to operate manual controls and what state the manual controls have forced the relay into.Applications:  Designed to replicate common multi-battery switching and charge management functions - common dual battery load switching via the outer relays and a central automatic charging relay to share charge current are easily implemented Multiple automatic charging relays (ACR) into one device - for 3-4 battery systems that require 2 or 3 ACRs, a single three-relay ACR provides drastic improvements in off-state quiescent current draw, space used, and reduces unnecessary interconnection cables.  Expandable with link and cross-link busbars to additional dual, triple, or single XD relays - supports 3 or 4 battery systems with standard busbar interconnect accessories. Features: Bullet-proof construction - sealed to IP67/IP6K9K, high temperature electronics and materials allow mounting anywhere; stainless steel cable lug studs; large mounting holes accept 1/4-20 / M6 attachment hardware Intuitive manual control option simplifies operation and increases awareness of the state of the manual override and whether the device is being left in a locked-off or locked-on state (not available on competitive solutions) Simple programming via simple dip switches allows each relay function significant flexibility for OEMs and installers. 35-75% reduction in mounting space and product weight via advanced bi-stable solenoid design and multiple solenoid assemblies that replace common electrical system layouts Plug and play compatible with legacy competitor products - single, dual, and triple relay options are available with DTM/ATM connector pins compatible with ML Series bi-stable relays 90-95% less off-state current compared to competitive products and system solutions that require multiple devices for similar functionality Specifications: Total Continuous Current Amps: 500 Max Cranking Current (Amps): 1500 Mechanical Switching Life: 1,000,000 Cycles Voltage Range (VDC): 8-36 Off-State Current Draw (mA): 1.3 State Change Current: 5A @ 12 VDC; 3A @ 24 VDC Focal Features:Led Status DisplayThe easy-to-see front-facing LED indicator provides visual device status, and the remote LED replicates the local on-device LED. 3-Position Manual overrideForce each relay open or closed, and optionally leave the knob in either position to lock the relay in either condition. 40 Circuit Label Sheet IncludedConvenient recesses for the included weatherproof label set make circuit and relay identification easy. Blank labels for custom applications. Protective Cover includedProtects terminal studs and cable terminal edges from inadvertent shorts to each other or ground. Stainless Hardware Corrosion is no issue with quality stainless steel studs and self-locking flanged nuts.ProgrammableVia dip switches located under the protective cover. An easy-to-use configuration guide on the reverse makes custom settings a breeze to configure for a wide variety of applications. Smaller FootprintXD relays offer a high amp rating in a smaller package than competitive solutions, reducing installation space requirements to a minimum. Integrated VentHigh-quality Gortex vents regulate internal device pressure to eliminate moisture entry across seals and ensure long product life in harsh environments.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Lanocote Rust & Corrosion Solution - 16 oz. LanoCote works on these five basic principles: displaces water, absorbs corrosion, forms moisture barrier, penetrates and high lubricity. LanoCote is extremely effective in preventing and stopping corrosion on all types of metals under all environmental conditions. Formulated to withstand salt water marine conditions, LanoCote is particularly useful in preventing thread seizure due to all types of corrosion on boats and machinery.Applied during assembly, LanoCote will greatly assist in easy dismantling years later. An example would be anchor shackles which are regularly immersed in salt water. LanoCote also combats galvanization where dissimilar metals are fastened together, such as stainless steel fittings on alloy masts etc. Features: Prevents Thread Freeze-up Combats Galvanic Reaction of Dissimilar Metals Seals Porous Surfaces Neutralizes Acids, Alkalies, & Salts Prevents Corrosion on Electronic Contacts Specifications: Type: Corrosion Protection Box Dimensions: 4"H x 4"W x 4"L WT: 0.95 lbs UPC: 028026136268

Read more less

Round USB & USB-C Power Socket with Hidden VoltmeterUSB 3.0 & USB-C Power Socket with Voltmeter charges two devices simultaneously while the LED screen displays voltage status. The total output 6A load is split 3A per side as needed. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. A protective dust cap extends the life of the charger. Features:  LED volt meter reads voltage up to 14.6 volts  Includes an On/Off button to conserve battery power when not in use  Constructed of injection molded nylon  Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires  Also, fits Sea-Dog® Power Socket Shell (426100) and Mounting Bracket (426105) Blue LED display  IP65 rating & RoHS compliant. Specifications: Output DC: 5V/6A Input: 8-32VDC USB-C Watts: 60W@24V  USB Watts: 36W@12V Plug-In Side Diameter: (inch) 1-7/16" Length: (inch) 1-1/2" *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less