• Blue Sea 7939 Contura II Switch DPDT Black - ON-ON [7939] Blue Sea 7939 Contura II Switch DPDT Black - ON-ON [7939]

    Blue Sea Systems Blue Sea 7939 Contura II Switch DPDT Black - ON-ON [7939]

    Contura II Switch DPDT Black - ON-ONVibration, shock, thermoshock, moisture and salt spray resistantMounts in Blue Sea Systems Contura Water Resistant Panels and Contura Switch Mounting PanelsSpecifications: Action: ON-ON Pole/Throw: DPDT - Double Pole/ Double Throw Actuator Color: Black - Contura II Common Applications: Switching between shunts or current transformers with one meter Maximum Amperage: 20A @ 12V / 15A @ 24V Amperage Operating Current: 18mA (LED) Minimum Operating Temperature: -40° C Maximum Operating Temperature: 85° C Actuator Position to Light LED: ON Embedded LEDs: 2 Lighting: LED rated 100,000 hours 1/2 half Seals: Internal and external gasket panel seal Weight: 0.09lb (0.04 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: ON-ON Color: Black Throw/Pole: DPDT Box Dimensions: 2"H x 2"W x 4"L WT: 0.2 lbs UPC: 632085079390

    $20.99

  • Marinco 50A 125/250V Locking Connector [6364CRN]

    Marinco Marinco 50A 125/250V Locking Connector [6364CRN]

    50 Amp 125/250 Volt Locking Connector6364CRNFeaturesCorrosion resistant materials 4-Wire connector / 3-blade openings 50 amp 125/250 volt female connector 5 Year WarrantyWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Plugs Box Dimensions: 3"H x 5"W x 9"L WT: 0.7 lbs UPC: 093344006715 Owner's Manual (pdf)

    $106.99

  • Blue Sea 1810 VSM 422 Tank Sender Diesel, Water, or Waste Tank Level [1810]

    Blue Sea Systems Blue Sea 1810 VSM 422 Tank Sender Diesel, Water, or Waste Tank Level [1810]

    1810Features: Accurate - used with the Vessel Systems Monitor VSM 422 PN 1800 - can be precisely calibrated for each tank* Reliable - SSI Technologies, Inc. Fluid-Trac® is non-contacting eliminating any mechanical moving parts that can wear and cause intermittent or complete signal loss Digital filtering - Eliminates errors due to liquids sloshing in mobile tanks * Calibrated for use with Blue Sea Systems Vessel Systems Monitor VSM 422 only WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

    $109.99

  • Blue Sea 7365 C-Series Double Pole Circuit Breaker - 30A [7365]

    Blue Sea Systems Blue Sea 7365 C-Series Double Pole Circuit Breaker - 30A [7365]

    C-Series TogglePN: 7365Poles: 2Color: WhiteAmperage: 30AFeatures: 5,000 Ampere interrupt capacity to meet ABYC requirements for 120/240 Volt 50 Ampere main protection Double pole used as 120 volt AC main circuit breaker to switch hot to neutral Triple pole used as 240 volt AC main circuit breaker to switch lines (hot) and neutral Double and triple pole circuit breakers will trip all poles will trip if any one pole trips Trip Free design cannot be held ON during fault current condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 30a Box Dimensions: 4"H x 5"W x 5"L WT: 0.7 lbs UPC: 632085073657

    $120.99

  • Blue Sea 7248 C-Series Toggle Single Pole - 80A [7248]

    Blue Sea Systems Blue Sea 7248 C-Series Toggle Single Pole - 80A [7248]

    C-Series Toggle Single PolePN: 7248Poles: 1Color: WhiteAmperage: 80AFeatures: Provides overcurrent protection for inverters, bow thrusters, and windlasses Combines switching and circuit protection into a single device "Trip Free" - cannot be held closed after trip WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 80a Box Dimensions: 2"H x 3"W x 5"L WT: 0.3 lbs UPC: 632085072483

    $50.99

  • Newmar PT-14W Battery Charger [PT-14W]

    Newmar Power Newmar PT-14W Battery Charger [PT-14W]

    PT-14W Battery ChargerNewmar’s Phase Three Series Battery Chargers employ “Smart” battery charging technology for 12-volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.A selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. This model is housed in a rugged stainless-steel case with a durable white powder coat finish, and the internal circuitry is polyurethane-coated for maximum corrosion resistance.Features: “Smart” circuitry provides three-stage charging – bulk, absorption, float Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages Multiple isolated output banks; ammeter indicates total output current. (Except PT-7) The optional sensor adjusts output voltage based on battery temperature. (Except PT-7) Current limiting prevents damage from overloading Clean well-regulated output can be used as a power supply; can power loads directly without a battery in line Built to last – rugged stainless-steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield ABS-type approval for battery charging and power supplies Specifications: Input VAC (50-60 Hz.): 85-264     Input Amps @ Full Load: @ 115 VAC: 2.8, @ 230 VAC: 1.4  P.F. Rating: .93@230V and .98@115V Max Output Amps: 14 Output Banks: 3 Battery Capacity (Amp-Hours): 28-140     Operating Temp. Rating Reference: T-2 Case Size Reference: A-2 Case Size (H x W x D): 11.2A x 7.7 x 4.75A inches (31.8A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A add 1.1” (2.8 cm) to height and .92” (2.3 cm) to depth Weight Lbs./Kg: 8/4 Optional Temp. Sensor Model: TCS-12/24     Remote Panel Model: RP Equalize Option: Yes Output Indicator Reference: M-3 Compliance Reference: CG, CE     Temperature Rating References: Temperature: -10 degrees C to +60 degrees C     Derate Linearly From 100% @ 40 degrees C to 60% @ 60 degrees C Nominal Output Voltages at Gel/Flooded Switch Settings (without Temperature Compensation): Gel-Cell: 14.0 VDC Charge @ 50% load and 13.6 VDC Float @ .5 amp load Flooded/AGM: 14.2 VDC Charge @ 50% load and 13.4 VDC Float @ .5 amp load Compliance References: CG: USCG CFR 183.410 (Ignition protected) CE: Carries the CE mark ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13. Options:Remote Panel, model RP, for use with all models except PT-7 and PT-40U (LEDs indicate the charger output stage. Manual re-initialization of a three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Input - Voltage: 115/230v Charger Output - Amps: 14a Charger Output Voltage: 12v Charging Banks: 3 Portable: No Inverter Input Voltage: 115/230v Inverter Output Voltage: 115/230v Outlet Qty: Hardwire Box Dimensions: 10"H x 11"W x 16"L WT: 9.5 lbs Quick Guide (pdf)Owner's Manual (pdf)

    $725.99

  • Blue Sea 8664 Contura 2 Bilge Pump Control Panel [8664]

    Blue Sea Systems Blue Sea 8664 Contura 2 Bilge Pump Control Panel [8664]

    8664 Contura 2 Bilge Pump Control PanelBlue Sea Systems water resistant 12/24 Volt DC Bilge Pump control panel with Contura rocker switch and fuse holder for fuses up to 20amp Features: Designed for 12 or 24V DC systems   ON - OFF - AUTO Contura Switch Watertight mounting gasket Fuse holders accept commonly available AGC and MDL glass fuses "ON” LED embedded in switch indicates the pump is running Completely wired and ready to install Specifications: Weatherproof - Water Resistant No. of Bilge Pumps - two (2) Nominal Voltage - 12/24V Panel Cumulative Rating - 45A Switch Rating: 20A @ 12V DC / 15A @ 24V DC Dimensions (H x W x D) - 3.75" x 3.34" x 3" In the Box: Panel Mount AGC/MDL Fuse Holder (P/N 5021) x two (2) Contura III Switch SPDT - On - OFF - (ON) (P/N 7944) x two (2) Black 60 Label Set (P/N 8214) *Sold as an Individual  Specifications: Action: on - off - auto Color: Black/Grey Throw/Pole: SPDT Box Dimensions: 5"H x 7"W x 8"L WT: 0.5 lbs UPC: 632085086640 Owner's Manual (pdf)

    $100.99

  • Blue Sea 7542 C-Series Flat Rocker Circuit Breaker - Single Pole - 15A [7542]

    Blue Sea Systems Blue Sea 7542 C-Series Flat Rocker Circuit Breaker - Single Pole - 15A [7542]

    C-Series Flat Rocker Circuit Breaker - Single Pole - 15AFeatures: Rocker actuator is flush in the "ON" position, eliminating the risk of accidential switching Color actuator indicates "OFF" position Provides overcurrent protection for inverters, bow thrusters, and windlasses Combines switching and circuit protection into a single device "Trip Free" - cannot be held closed after trip Ignition protectedsafe for installation aboard gasoline powered boats Specifications: Amperage: 15A AC / 15A DC Actuator Style: Flat Rocker Poles: 1 Maximum Voltage: 240V AC / 48V DC Circuit Breaker Type: Magnetic Hydraulic - trip free Terminal Stud Torque: 35 in-lb (3.95 Nm) Interrupt Capacity: 3000A @ 120V AC / 3500A @ 240V AC / 5000A @ 32V DC Minimum Operating Temperature: -40° C Maximum Operating Temperature: 85° C Mounting Screw: #6-32 Stainless Steel Mounting Screw Torque: 6 in-lb (0.68 Nm) Switching Cycles: 10000 Terminal Stud: 1/4-20 Tin-Plated Brass Weight: 0.38lb (0.17 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 15a Box Dimensions: 2"H x 3"W x 4"L WT: 0.4 lbs UPC: 632085075422

    $42.99

  • Seaview Black Plastic Vertical Cable Seal f/Multiple Wires Up to 10.6mm/0.5" [CGM17PB]

    Seaview Seaview Black Plastic Vertical Cable Seal f/Multiple Wires Up to 10.6mm/0.5" [CGM17PB]

    Black Plastic Vertical Cable Seal for Multiple Wires Up to 10.6mm/0.5"The Seaview Cable Seals (also known as CableClams, Cable Glands, or Deck Seals) provide waterproof cable routing. These are made of very strong plastic or marine grade 316 stainless steel and come in a variety of colors and finishes. Seaview cable seals fit a wide range of cables and connectors. Seaview Cable Seal options for 17mm to 34mm (0.67” to 1.38”) connectors, making it ideal for almost every installation.Features: No need to remove connectors - The split seal design eliminates the need to remove cable connectors during installation.   Watertight installation - Tapered rubber seal forms watertight installation. The base gasket is also provided for a clean, watertight installation. Waterproof rating of IPX6 and IPX7 Improved shape and design - Low profile design for a strong, impact-resistant, and clean installation. No sharp edges  Drill tubes included - Each cable seal comes with 4 brass drill tubes (6, 8, 10 & 12mm). These are used to drill very clean and easy holes vs a typical drill bit. Some other brands do come with pre-drilled rubbers but we choose to include metal drill tubes that can be recycled or reused when finished vs the extra rubber pieces that will end up in the landfill from others  Note:*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole. Specifications: Type: Deck Seal Box Dimensions: 1"H x 3"W x 7"L WT: 0.4 lbs UPC: 727908835854 Brochure (pdf)

    $39.20

  • Victron BlueSmart IP65 Charger 24/13 (1) 120V NEMA 1-15P UL Approved [BPC241331124]

    Victron Energy Victron BlueSmart IP65 Charger 24/13 (1) 120V NEMA 1-15P UL Approved [BPC241331124]

    BlueSmart IP65 Charger 24/13 (1) 120V NEMA 1-15P UL ApprovedThe Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in the workshop and on motor vehicles, such as classic cars, motorbikes, boats, and campervans. The Battery Is Charged, Smartly... To Perfect ConditionThe seven-step charging algorithm gets the most out of a battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and gives it a longer life.Recovery of Deeply-Discharged ‘Dead’ BatteriesUnlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.Connect the Battery with EaseThe charger comes with both crocodile clips and M8 eyelets, making it easy to connect to the battery. If users wish, they can leave it permanently connected.Check the Status of the Battery RemotelyThe Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet, or laptop. All settings of the charger can be configured with the VictronConnect app.Specifications: Input Voltage: 120 VAC Efficiency: 95% Standby Power Consumption: 95% 0.5W  Minimum Battery Voltage: Starts charging from down to 0V Charge Voltage 'Absorption': Normal: 28,8V High: 29,4V Li-ion: 28,4V Charge Voltage 'Float': Normal: 27,6V High: 27,6V Li-ion: 27,0V  Charge Voltage 'Storage': Normal: 26,4V High: 26,4V Li-ion: 27,0V  Charge Current: 5/8A Charge Current in Low Current Mode: 2 / 3A  Temperature Compensation (Lead-Acid Batteries Only): 32 mV/degrees C (18mV/degrees F Can Be Used as Power Supply: Yes Back Curreny Drain: 0.7Ah/month  (1mA)  Protection: Reverse polarity; Output short circuit; Over temperature  Operating Temp. Range: -40 to +60 degrees C (full rated output up to 30 degrees C) -40  to +140 degrees F (full rated output up to 90 degrees F)  Humidity (non-condensing): Max 95% Enclosure Specifications: Battery-Connection: Black and red cable of 1.5 meters (4.9 feet) 120 V Ac-Connection: Cable of 1.8 meters (5.9 feet) with US NEMA 1-15 plug Protection Category: P65 (splash and dust proof, and ignition protected) Weight: 0,9kg (2lbs) Dimensions (H x W x D): 24/8: 60 x 105 x190mm 2.3 x 4.1x 7.5 inches Standards: Safety: UL 1236, CSA C22.2, EN 60335-1, 60335-2-29 Emission: EN 55014-1, EN 61000-6-3, EN 61000-3-2 Immunity: EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3 Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 120v Charger Output - Amps: 13a Charger Output Voltage: 24v Charging Banks: 1 Portable: Yes Box Dimensions: 4"H x 7"W x 16"L WT: 4.8 lbs UPC: 8719076060888 Quick Guide (pdf)Owner's Manual (pdf)

    $232.90

  • BEP SPST Lighted Toggle Switch - Red LED - 12V - #6-32 Terminal - ON/OFF [1001908]

    BEP Marine BEP SPST Lighted Toggle Switch - Red LED - 12V - #6-32 Terminal - ON/OFF [1001908]

    SPST Lighted Toggle Switch - Red LED - 12V - #6-32 Terminal - ON/OFFSingle pole, single throw toggle switch turns one circuit on and off.Features: Nominal voltage is 12V DC Rated for 25A at 12V DC Four #6-32 screw terminals Switch illuminates red when on and is clear when off 15/32" mounting hole, fits panels up to 1/8" thick Same as Cole Hersee part number M-54109 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: On/Off Color: Clear Throw/Pole: SPST Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046594

    $9.99

  • BEP SPST Rocker Switch - 12V - ON/OFF [1001707]

    BEP Marine BEP SPST Rocker Switch - 12V - ON/OFF [1001707]

    SPST Rocker Switch - 12V - ON/OFFSingle pole, single throw switch turns one circuit on and off.Features: Nominal voltage is 12V/24V DC Rated for 20A at12V DC, 10A at 24V DC Two #8-32 screw terminals Snap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick Same as Cole Hersee part number 56027-01 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Throw/Pole: SPST Color: Black Action: On/Off Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046280

    $5.99

  • BEP Pro Installer Z Bus Bar - 10 Way - 200A [777-Z10W-200]

    BEP Marine BEP Pro Installer Z Bus Bar - 10 Way - 200A [777-Z10W-200]

    200A Z Bar 10 Way Bus BarThis patent-pending, space saving bus bar range is a completely new concept for marine cable termination. Offering almost unlimited installation flexibility, the high and low level bars can be bussed together with Z-Link or used as separate positive/negative bars. Pro Installer Z-Bars are available in (10) way and (18) way 200 Amp Z-Bar models for a variety of onboard applications. Easily extend Z-Bars by placing on end or back-to-back Clean installation-all cables can be run from one side of the Z-bar Innovative clear covers insulate and protect on three sides and offer easy acces WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

    $36.99

  • BEP Contour Switch Panel - Waterproof 6 Way [CSP6]

    BEP Marine BEP Contour Switch Panel - Waterproof 6 Way [CSP6]

    Contour Switch Panel - Waterproof 6 WayCSP6 includes 6 switches unfused for installation where a separate fused supply is available.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Max Breaker Quantity: 6 Voltage: 12v Box Dimensions: 4"H x 5"W x 9"L WT: 0.8 lbs UPC: 870216001128

    $75.99

  • Bluewater 19mm Inrush Push Button Switch Momentary Off-(On) - Blue/Red LED - Switch Body Only [9057-2113]

    Bluewater Bluewater 19mm Inrush Push Button Switch Momentary Off-(On) - Blue/Red LED - Switch Body Only [9057-2113]

    19mm Inrush Push Button Switch Momentary Off-(On) - Blue/Red LED - Switch Body OnlyThe 9057 Series 19mm Marine Grade Switch is a compact precision control solution engineered for tight panel layouts and rugged environments. Housed in corrosion-resistant SS316 stainless steel and sealed to an IP69K waterproof rating made possible by Bluewater’s proprietary Deutsch-style connectors, it is built to withstand the demands of marine and outdoor applications.This IP69K waterproof switch is ideal for locations exposed to salt spray, washdowns, and constant environmental stress.This switch provides clear and intuitive feedback with smart LED indicators. It glows soft blue for backlighting and bright red when active, giving you immediate visual confirmation of power status. Rated for 15 amps in single channel or 7.5 amps per channel in dual channel configurations, the 9057 handles high current loads with consistent performance and reliability.Each switch features a fully detachable actuator that is completely customizable to fit your specific needs and style preferences. The built-in backlighting ensures visibility in any lighting condition.Ideal for boat builders, marine technicians, and anyone upgrading electrical systems where space is limited and durability is critical.Specifications: Switch Rating: 15A/12-24VDC Switch Contacts: 1 NO, 1 NC | 2 NO, 2 NC Mechanical Life: 50,000 Cycles Electrical Life: 10,000 Cycles Dimensions: View Dimensional Drawings Material: Nickel Plated Brass/ Stainless Steel LED Color: Blue/Green/Red Installation:Drill a 19mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color coded for your safety and convenience). Lastly connect the 2 contacts for the LED. Specifications: Action: (ON)-OFF Color: Blue/Red Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs UPC: 810196330771 Quick Guide (pdf)Brochure (pdf)

    $48.00

  • Blue Sea 3120 - SMS Panel Enclosure w/ELCI Main (50A) and 2 Blanks - 240V [3120]

    Blue Sea Systems Blue Sea 3120 - SMS Panel Enclosure w/ELCI Main (50A) and 2 Blanks - 240V [3120]

    3120 - SMS Panel Enclosure with ELCI Main (50A) and 2 Blanks - 240VThe 3120 panel enclosure is built for Equipment Leakage Circuit Interrupters (ELCI) main circuit breakers and other large frame devices.  Meets ABYC E-11 when used with an ELCI Main circuit breaker and mounted within 10' of AC shore power inlet.Features: Blank apertures for custom breaker loading Glass filled polycarbonate base Clear cover allows easy view of circuit breaker status Overlapping cover for strength and increased gasket protection Oversized, formed in place seamless PUR gasket Easily removable stainless steel hinge pin for unobstructed installation Stainless steel latch secures cover without penetrating the enclosure Blank circuit positions accommodate Carling Technologies™ A and C Series Flat Rocker and ELCI Main circuit breakers Includes waterproof glands LEDs for backlighting and ON indication Technical Specifications: Circuit Breaker Type - 1 x ELCI (50A) Main 240V and 2 x Blank Dimensions (Overall) (H x W x D) - 7.6" x 7.4"" x 4.7" (192 x 188 x 120mm) Dimensions  (Enclosure) (H x W x D) - 6" x 6" x 4" (152 x 152 x 102mm) LEDs Installed - 2 x Green ON (240V AC)  In the Box: 3120 Enclosure Glands x 5 Labels Mounting hardware Instruction manual *Sold as an IndividualWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

    $750.99

  • Blue Sea 7454 UL-489 Circuit Breaker - 5A Flat Rocker [7454]

    Blue Sea Systems Blue Sea 7454 UL-489 Circuit Breaker - 5A Flat Rocker [7454]

    7454 UL-489 Circuit Breaker - 5A Flat RockerSuitable for use when UL-489 specifications are required (Navy, Army, or Coast Guard vessels, and other vessels covered under CFR 46).Specifications: Amperage: 5A AC Actuator Style: Flat Rocker Poles: 1 Maximum Voltage: 240V DC Circuit Breaker Type: Magnetic Hydraulic - Trip Free Terminal Type:  #10-32 Screw Tin-Plated Brass  Interrupt Capacity: 5000A Specifications: Amperage: 5a Box Dimensions: 2"H x 3"W x 5"L WT: 0.25 lbs UPC: 632085374549

    $40.99

  • ARCO Marine Zeus 24V 7kW J180 4" Alternator w/Isolated Ground [4503] ARCO Marine Zeus 24V 7kW J180 4" Alternator w/Isolated Ground [4503]

    ARCO Marine ARCO Marine Zeus 24V 7kW J180 4" Alternator w/Isolated Ground [4503]

    Zeus 24V 7kW J180 4" Alternator with Isolated GroundThe ARCO Zeus 24v 7kW alternator generates extremely high amperage at cruising and higher RPMs. This alternator continuously generates over 3kW (109 Amps) at just under 3,000 alternator RPM and almost 6kW (218 Amps) at under 6,000 RPM. In real-world terms, a marine diesel engine at 1,500 RPM with a 2:1 pulley ratio generates over 3kW, and a Mercedes Sprinter at 1,800 RPM with a 3.21:1 ratio generates over 6kW!The ARCO Zeus 24v 7kW alternator turns on for cruising or at mid to higher RPMs, runs cooler, and provides more power than older designs that are larger and heavier. The newest generation of 24V performance has arrived.Competitor’s 24V alternators utilize a 12V rotor and field current which is less efficient and limits output at all RPMs. ARCO utilizes a native 24V rotor and field current. This results in our 24V alternator running cooler than competitor’s 24V alternators, having a direct impact onthe  alternator lifespan.Features: Engineered for high energy production. Suitable for marine, RV, military, and commercial applications. Rapidly charges large battery banks. Coolest operating temperatures for increased performance: Heat shedding coatings Rectifier located on housing exterior Dual cooling fans OEM components Optimized for performance at idle speeds. Reduces the need for a generator by creating additional power with your engine. Unleash peak performance with E-Coat/Cerakote, keeping the high amp alternator cooler for sustained amperage output. Use the ARCO Zeus Bluetooth Alternator Regulator for maximum performance or lithium battery charging. SAE J1171 Certified. Proudly made in the U.S.A. Technical Specifications: Voltage - 24v Field Type - P Rotor Poles - 16 Stator Size - 138mm Frame Size - Large Weight - 15.89lbs/7.2kg Regulation - External Only Finish - (Black) E-coating Cut-In RPM - 1,962 Alternator RPM Maximum Alt RPM - 19,000 Battery Post - M8 Thread Post, Side Mount Standard Pulley - 49K6 (6-groove, 49mm) Pulley Mount - 17mm diameter shaft, 25mm long, threaded M17 x 1.5 Pulley Hardware - M17 x 1.5 x 24mm nut, w/ 18mm ID x 29mm OD washer (Included) Diodes - 6 positive, 6 negative, 80A Rated, Avalanche Max Output (Cold, 9,000 RPM) at 27.5v - 284 Amps - 7,810 Watts – 11.2 kW PTO Sustained Cruising Output (Hot, 6,000 RPM) at 27.5v - 220 Amps - 6,050 Watts – 8.6kW PTO Sustained Idle Output (Hot, 3,000 RPM) at 27.5v - 50 Amps 1,375 Watts – 2kW PTO Max Continuous Operating Temperature - 100°C / 212°F Mounting Application:Replaces most Volvo Penta alternators using a 4” J180 saddle-style mount. Also, used on many larger industrial-based engines. Quick Guide (pdf)Brochure (pdf)

    $1,427.80

  • Victron Orion-TR DC-DC Converter - 24 VDC to 24 VDC - 280W - 12AMP Isolated [ORI242428110] Victron Orion-TR DC-DC Converter - 24 VDC to 24 VDC - 280W - 12AMP Isolated [ORI242428110]

    Victron Energy Victron Orion-TR DC-DC Converter - 24 VDC to 24 VDC - 280W - 12AMP Isolated [ORI242428110]

    Orion-TR 24/24-12A (280W) Isolated DC-DC ConverterIsolated Model - separate in and out (-) leads Remote On/Off TerminalThe remote on/off terminal eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or for example the engine run/stop switch. All Models Are Short Circuit Proof and Can Be Paralleled to Increase Output CurrentAn unlimited number of units can be connected in parallel.  High Temperature Protected The output current will reduce at high ambient temperatures.  IP43 Protection When installed with the screw terminals oriented downward.  Screw Terminals No special tools are needed for installation.  Input Fuse (not replaceable) On 12 V and 24 V input models only.  Adjustable Output Voltage Not intended for battery charging (consider using an Orion-Tr Smart for battery charging).Specifications: Input Voltage Range: 16-35 V Under Voltage Shut Down: 14 V Under Voltage Restart: 15 V Nominal Output Voltage: 24.2 V Output Voltage Adjust Range: 20-30 V Output Voltage Tolerance: +/- 0,2 V Output Noise: 2 mV rms Cont. Output Current at Nominal Output Voltage and 40 Degrees C: 12 A Maximum Output Current (10 S) at Nominal Output Voltage: 15 A Short Circuit Output Current: 30 A Cont. Output Power at 25 Degrees C: 320 W Cont. Output Power at 40 Degrees C: 280 W Efficiency: 89 % No Load Input Current (2): < 80 mA  Galvanic Isolation: 200 VDC between input, output, and case Operating Temperature Range: -20 to +55 Degrees C (derate 3 % per °C above 40 °C) Humidity: Max. 95 % non-condensing DC Connection: Screw terminals Maximum Cable Cross-Section: 16 mm² AWG6 Weight: 1.3 kg (3 lb) Dimensions (H x W x D): 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch) Safety Standards: EN 60950 Immunity Standards: EN 61000-6-3, EN 61000-6-1, EN 55014-2 Automotive Directive Standards: ECE R10-5 Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

    $113.90

  • Ancor White Triplex Cable - 8/3 AWG - Flat - 100' [130910]

    Ancor Ancor White Triplex Cable - 8/3 AWG - Flat - 100' [130910]

    White Triplex Cable - 8/3 AWG - Flat - 100'Features: Ancor Triplex Cable is made to surpass the highest UL Boat Cable standards with ultra flexible (Type 3/Class K) stranding to resist fatigue due to vibration and flexing. Outer jacket is made for easy removal and provides the best abrasion resistance available Ancors proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600 volts, 105°C dry and 75°C wet, and is resistant to heat and abrasion. Features three Marine Grade™ primary conductors (white, black and green) in a white common jacket. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Feet): 100' Gauge: 8/3 AWG Color: Black/Green/White Box Dimensions: 11"H x 11"W x 11"L WT: 31.8 lbs UPC: 091887101638

    $361.99

  • Ancor Safety Duplex Cable - 12/2 AWG - Red/Yellow - Flat - 250' [124325]

    Ancor Ancor Safety Duplex Cable - 12/2 AWG - Red/Yellow - Flat - 250' [124325]

    Safety Duplex Cable - 12/2 AWG - Red/Yellow - Flat - 250'Ancor safety duplex cable features red and yellow Marine Grade primary conductors (correctly color-coded to ABYC standards) in a white common jacket that is made for easy removal while providing the best abrasion resistance available. These cables exceed UL 1426 standards and are made from the highest quality ultra flexible (Type 3/Class K) tinned copper stranding that provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing. The premium vinyl insulation is rated at 600V, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water,battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Red/Yellow Length (Feet): 250' Gauge: 12/2 AWG Box Dimensions: 5"H x 11"W x 11"L WT: 20 lbs UPC: 091887805925

    $222.99

  • Blue Sea 7136 187 - Series Thermal Circuit Breaker - 30Amp [7136]

    Blue Sea Systems Blue Sea 7136 187 - Series Thermal Circuit Breaker - 30Amp [7136]

    187 - Series Thermal Circuit Breakers - Surface Mount30 Amp Circuit BreakerPN:  7136Features: Combines switching and circuit protection into a single device All components meet SAE J1171 external ignition protection requirements Clear, single lever operation "Trip Free" design cannot be held "ON" during fault current condition Waterproof Recessed mounting holes for clean appearance Large clearance around terminal studs accept heavy gauge wire lugs Robust 5/16 terminals provide high torque connections Large lever with vertical/horizontal orientation provides indication of trip status Ignition protected - safe for installation aboard gasoline powered boats Specifications   Circuit Breaker Class: Type III - Switchable / Manual Reset - Trip Free Type: Thermally Responsive Bi-Metal Blade Case Material: Thermoset Polyester Voltage Rating: 48 Volts DC Maximum Interrupt Rating: 5,000 Amperes @12 Volts DC   3,000 Amperes @24 Volts DC   1,500 Amperes @42 Volts DC Operating Temperature Range: -25C° to +82C° WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 30a Box Dimensions: 3"H x 4"W x 6"L WT: 0.4 lbs UPC: 632085171360

    $88.99

  • Blue Sea 4018 Square CableCap Insulators Pair Red/Black [4018]

    Blue Sea Systems Blue Sea 4018 Square CableCap Insulators Pair Red/Black [4018]

    Square CableCap Insulators Pair Red/BlackSquare CableCap insulators - Cable size 1/0Pair: 1 Red/1 BlackWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $7.99

  • Blue Sea 8247 AC Digital Multimeter with Alarm [8247] Blue Sea 8247 AC Digital Multimeter with Alarm [8247]

    Blue Sea Systems Blue Sea 8247 AC Digital Multimeter with Alarm [8247]

    AC Digital Multimeter with Alarm Displays amperage from 0 to 150 Amps Displays voltage from 80 to 270 Volts Displays power from 0 to 45 Kilowatts Displays frequency from 40 to 90 Hertz High and low voltage and high amperage alarms, both audio and visual 3 levels of display brightness Programmable sleep mode blanks display for power conservation Splashproof front Includes current transformer Three levels of display brightness WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

    $310.99

  • Blue Sea 8256 AC Current Transformer [8256]

    Blue Sea Systems Blue Sea 8256 AC Current Transformer [8256]

    AC Current TransformerRatio: 150A AC/50mA ACFor use with AC AmmetersWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $26.99

  • Blue Sea 8166 Red LED Indicator Light [8166]

    Blue Sea Systems Blue Sea 8166 Red LED Indicator Light [8166]

    8166LED Indicator LightRed230V AC0.25 Milliamperes Easily installed in any Blue Sea Systems circuit breaker panel Simple push-in installation mounts in any thickness material Useful as general indicator and alarm lights WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Red Box Dimensions: 1"H x 2"W x 3"L WT: 0.2 lbs UPC: 632085081669

    $3.99

  • Blue Sea 8255 Digital Meter Shunt 500A/50mV [8255]

    Blue Sea Systems Blue Sea 8255 Digital Meter Shunt 500A/50mV [8255]

    DC Shunt For use with DC Ammeters For continuous operation, it is recommended that shunts not to be run at more than two-thirds (66%) the rated current under normal conditions WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $65.99

  • Blue Sea 5108 MEGA/AMG FUSE(SEA) Fuse - 300 AMP [5108]

    Blue Sea Systems Blue Sea 5108 MEGA/AMG FUSE(SEA) Fuse - 300 AMP [5108]

    5108SEA FusesBlue Sea 5108 MEGA or AMG (SEA) fuseWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 300a Fuse Type: MEGA/AMG Type: Fuses Box Dimensions: 1"H x 3"W x 5"L WT: 0.05 lbs UPC: 632085051082

    $8.99

  • Blue Sea 5242 15A ATO/ATC Fuse [5242]

    Blue Sea Systems Blue Sea 5242 15A ATO/ATC Fuse [5242]

    5242ATO/ATC Fuse15A Fast-acting type fuse ideal for electronic devices Standard circuit protection device for automobiles and trucks Tin-plated connector blades for corrosion resistance Visible indication of blown condition Sold in packages of 2 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 15a Fuse Type: ATO/ATC Type: Fuses Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 632085052423

    $2.99

  • Bluewater 19mm Electronic Deutsch Connector w/4-Wire Pigtail - 1' Lead [9057-4914-112]

    Bluewater Bluewater 19mm Electronic Deutsch Connector w/4-Wire Pigtail - 1' Lead [9057-4914-112]

    19mm Electronic Deutsch Connector with 4-Wire Pigtail - 1' LeadThe proprietary Deutsch style connectors are designed for fast, clean, and reliable switch installations in the most demanding environments. Whether you are working with 19mm or 22mm switches, these connectors offer a secure, IP69k-rated, sealed connection that protects against dust, water, and corrosion. They will continue to perform even when fully submerged.Color-coded wiring makes it easy to identify input, output, ground, and LED leads, reducing setup time and wiring errors. When it is time to replace a switch, there is no need to untangle your entire panel. Pop the connector off and install a new switch.Purpose-built for marine, automotive, and industrial applications, these one-of-a-kind, patented connectors provide rugged reliability, simplified service, and clean cable management - all backed by their tough IP69K waterproof rating, which withstands the harshest conditions.Specifications: Available in 19mm or 22mm Uses 3 DT-style female terminals and 2 DTP-style female terminals. IP69K Waterproof Rating

    $10.50

  • Bluewater 22mm Electronic Deutsch Connector w/5-Wire Pigtal - Nav/Anchor - 1' Lead [9053-3914-212]

    Bluewater Bluewater 22mm Electronic Deutsch Connector w/5-Wire Pigtal - Nav/Anchor - 1' Lead [9053-3914-212]

    22mm Electronic Deutsch Connector with 5-Wire Pigtal - Nav/Anchor - 1' LeadThe proprietary Deutsch style connectors are designed for fast, clean, and reliable switch installations in the most demanding environments. Whether you are working with 19mm or 22mm switches, these connectors offer a secure, IP69k-rated, sealed connection that protects against dust, water, and corrosion. They will continue to perform even when fully submerged.Color-coded wiring makes it easy to identify input, output, ground, and LED leads, reducing setup time and wiring errors. When it is time to replace a switch, there is no need to untangle your entire panel. Pop the connector off and install a new switch.Purpose-built for marine, automotive, and industrial applications, these one-of-a-kind, patented connectors provide rugged reliability, simplified service, and clean cable management - all backed by their tough IP69K waterproof rating, which withstands the harshest conditions.Specifications: Available in 19mm or 22mm Uses 3 DT-style female terminals and 2 DTP-style female terminals. IP69K Waterproof Rating

    $10.00

  • Bluewater 19mm Electronic Deutsch Connector w/4-Wire Pigtal - 4' Lead [9057-4914-148]

    Bluewater Bluewater 19mm Electronic Deutsch Connector w/4-Wire Pigtal - 4' Lead [9057-4914-148]

    19mm Electronic Deutsch Connector with 4-Wire Pigtal - 4' LeadThe proprietary Deutsch style connectors are designed for fast, clean, and reliable switch installations in the most demanding environments. Whether you are working with 19mm or 22mm switches, these connectors offer a secure, IP69k-rated, sealed connection that protects against dust, water, and corrosion. They will continue to perform even when fully submerged.Color-coded wiring makes it easy to identify input, output, ground, and LED leads, reducing setup time and wiring errors. When it is time to replace a switch, there is no need to untangle your entire panel. Pop the connector off and install a new switch.Purpose-built for marine, automotive, and industrial applications, these one-of-a-kind, patented connectors provide rugged reliability, simplified service, and clean cable management - all backed by their tough IP69K waterproof rating, which withstands the harshest conditions.Specifications: Available in 19mm or 22mm Uses 3 DT-style female terminals and 2 DTP-style female terminals. IP69K Waterproof Rating

    $17.00

  • Bluewater 19mm Electronic Deutsch Connector w/5-Wire Pigtal - Nav/Anchor - 4' Lead [9057-4914-248]

    Bluewater Bluewater 19mm Electronic Deutsch Connector w/5-Wire Pigtal - Nav/Anchor - 4' Lead [9057-4914-248]

    19mm Electronic Deutsch Connector with 5-Wire Pigtal - Nav/Anchor - 4' LeadThe proprietary Deutsch style connectors are designed for fast, clean, and reliable switch installations in the most demanding environments. Whether you are working with 19mm or 22mm switches, these connectors offer a secure, IP69k-rated, sealed connection that protects against dust, water, and corrosion. They will continue to perform even when fully submerged.Color-coded wiring makes it easy to identify input, output, ground, and LED leads, reducing setup time and wiring errors. When it is time to replace a switch, there is no need to untangle your entire panel. Pop the connector off and install a new switch.Purpose-built for marine, automotive, and industrial applications, these one-of-a-kind, patented connectors provide rugged reliability, simplified service, and clean cable management - all backed by their tough IP69K waterproof rating, which withstands the harshest conditions.Specifications: Available in 19mm or 22mm Uses 3 DT-style female terminals and 2 DTP-style female terminals. IP69K Waterproof Rating

    $20.00

  • Bluewater 22mm Electronic Deutsch Connector w/4-Wire Pigtal - 4' Lead [9053-3914-148]

    Bluewater Bluewater 22mm Electronic Deutsch Connector w/4-Wire Pigtal - 4' Lead [9053-3914-148]

    22mm Electronic Deutsch Connector with 4-Wire Pigtal - 4' LeadThe proprietary Deutsch style connectors are designed for fast, clean, and reliable switch installations in the most demanding environments. Whether you are working with 19mm or 22mm switches, these connectors offer a secure, IP69k-rated, sealed connection that protects against dust, water, and corrosion. They will continue to perform even when fully submerged.Color-coded wiring makes it easy to identify input, output, ground, and LED leads, reducing setup time and wiring errors. When it is time to replace a switch, there is no need to untangle your entire panel. Pop the connector off and install a new switch.Purpose-built for marine, automotive, and industrial applications, these one-of-a-kind, patented connectors provide rugged reliability, simplified service, and clean cable management - all backed by their tough IP69K waterproof rating, which withstands the harshest conditions.Specifications: Available in 19mm or 22mm Uses 3 DT-style female terminals and 2 DTP-style female terminals. IP69K Waterproof Rating

    $17.00

  • Bluewater 19mm Inrush Push Button Switch Nav/Anchor Off/On/On - Blue/Green/Red LED - Switch Body Only [9057-3114]

    Bluewater Bluewater 19mm Inrush Push Button Switch Nav/Anchor Off/On/On - Blue/Green/Red LED - Switch Body Only [9057-3114]

    19mm Inrush Push Button Switch Nav/Anchor Off/On/On - Blue/Green/Red LED - Switch Body OnlyThe 9057 Series 19mm Marine Grade Switch is a compact precision control solution engineered for tight panel layouts and rugged environments. Housed in corrosion-resistant SS316 stainless steel and sealed to an IP69K waterproof rating made possible by Bluewater’s proprietary Deutsch-style connectors, it is built to withstand the demands of marine and outdoor applications.This IP69K waterproof switch is ideal for locations exposed to salt spray, washdowns, and constant environmental stress.This switch provides clear and intuitive feedback with smart LED indicators. It glows soft blue for backlighting and bright red when active, giving you immediate visual confirmation of power status. Rated for 15 amps in single channel or 7.5 amps per channel in dual channel configurations, the 9057 handles high current loads with consistent performance and reliability.Each switch features a fully detachable actuator that is completely customizable to fit your specific needs and style preferences. The built-in backlighting ensures visibility in any lighting condition.Ideal for boat builders, marine technicians, and anyone upgrading electrical systems where space is limited and durability is critical.Specifications: Switch Rating: 15A/12-24VDC Switch Contacts: 1 NO, 1 NC | 2 NO, 2 NC Mechanical Life: 50,000 Cycles Electrical Life: 10,000 Cycles Dimensions: View Dimensional Drawings Material: Nickel Plated Brass/ Stainless Steel LED Color: Blue/Green/Red Installation:Drill a 19mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color coded for your safety and convenience). Lastly connect the 2 contacts for the LED. Specifications: Action: ON-ON-OFF Color: Blue/Green/Red Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs UPC: 810196330818 Quick Guide (pdf)Brochure (pdf)

    $48.00

  • Bluewater 19mm Inrush Push Button Switch Off/On/On - Blue/Green/Red LED - Switch Body Only [9057-3113]

    Bluewater Bluewater 19mm Inrush Push Button Switch Off/On/On - Blue/Green/Red LED - Switch Body Only [9057-3113]

    19mm Inrush Push Button Switch Off/On/On - Blue/Green/Red LED - Switch Body OnlyThe 9057 Series 19mm Marine Grade Switch is a compact precision control solution engineered for tight panel layouts and rugged environments. Housed in corrosion-resistant SS316 stainless steel and sealed to an IP69K waterproof rating made possible by Bluewater’s proprietary Deutsch-style connectors, it is built to withstand the demands of marine and outdoor applications.This IP69K waterproof switch is ideal for locations exposed to salt spray, washdowns, and constant environmental stress.This switch provides clear and intuitive feedback with smart LED indicators. It glows soft blue for backlighting and bright red when active, giving you immediate visual confirmation of power status. Rated for 15 amps in single channel or 7.5 amps per channel in dual channel configurations, the 9057 handles high current loads with consistent performance and reliability.Each switch features a fully detachable actuator that is completely customizable to fit your specific needs and style preferences. The built-in backlighting ensures visibility in any lighting condition.Ideal for boat builders, marine technicians, and anyone upgrading electrical systems where space is limited and durability is critical.Specifications: Switch Rating: 15A/12-24VDC Switch Contacts: 1 NO, 1 NC | 2 NO, 2 NC Mechanical Life: 50,000 Cycles Electrical Life: 10,000 Cycles Dimensions: View Dimensional Drawings Material: Nickel Plated Brass/ Stainless Steel LED Color: Blue/Green/Red Installation:Drill a 19mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color coded for your safety and convenience). Lastly connect the 2 contacts for the LED. Specifications: Action: ON-ON-OFF Color: Blue/Green/Red Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs UPC: 810196330801 Quick Guide (pdf)Brochure (pdf)

    $48.00

  • Bluewater 19mm Electronic Deutsch Connector w/5-Wire Pigtal - Nav/Anchor - 1' Lead [9057-4914-212]

    Bluewater Bluewater 19mm Electronic Deutsch Connector w/5-Wire Pigtal - Nav/Anchor - 1' Lead [9057-4914-212]

    19mm Electronic Deutsch Connector with 5-Wire Pigtal - Nav/Anchor - 1' LeadThe proprietary Deutsch style connectors are designed for fast, clean, and reliable switch installations in the most demanding environments. Whether you are working with 19mm or 22mm switches, these connectors offer a secure, IP69k-rated, sealed connection that protects against dust, water, and corrosion. They will continue to perform even when fully submerged.Color-coded wiring makes it easy to identify input, output, ground, and LED leads, reducing setup time and wiring errors. When it is time to replace a switch, there is no need to untangle your entire panel. Pop the connector off and install a new switch.Purpose-built for marine, automotive, and industrial applications, these one-of-a-kind, patented connectors provide rugged reliability, simplified service, and clean cable management - all backed by their tough IP69K waterproof rating, which withstands the harshest conditions.Specifications: Available in 19mm or 22mm Uses 3 DT-style female terminals and 2 DTP-style female terminals. IP69K Waterproof Rating

    $10.00

  • Bluewater 19mm Inrush Push Button Switch Momentary Off(On)(On) - Blue/Red/Green LED - Switch Body Only [9057-2123]

    Bluewater Bluewater 19mm Inrush Push Button Switch Momentary Off(On)(On) - Blue/Red/Green LED - Switch Body Only [9057-2123]

    19mm Inrush Push Button Switch Momentary Off(On)(On) - Blue/Red/Green LED - Switch Body OnlyThe 9057 Series 19mm Marine Grade Switch is a compact precision control solution engineered for tight panel layouts and rugged environments. Housed in corrosion-resistant SS316 stainless steel and sealed to an IP69K waterproof rating made possible by Bluewater’s proprietary Deutsch-style connectors, it is built to withstand the demands of marine and outdoor applications.This IP69K waterproof switch is ideal for locations exposed to salt spray, washdowns, and constant environmental stress.This switch provides clear and intuitive feedback with smart LED indicators. It glows soft blue for backlighting and bright red when active, giving you immediate visual confirmation of power status. Rated for 15 amps in single channel or 7.5 amps per channel in dual channel configurations, the 9057 handles high current loads with consistent performance and reliability.Each switch features a fully detachable actuator that is completely customizable to fit your specific needs and style preferences. The built-in backlighting ensures visibility in any lighting condition.Ideal for boat builders, marine technicians, and anyone upgrading electrical systems where space is limited and durability is critical.Specifications: Switch Rating: 15A/12-24VDC Switch Contacts: 1 NO, 1 NC | 2 NO, 2 NC Mechanical Life: 50,000 Cycles Electrical Life: 10,000 Cycles Dimensions: View Dimensional Drawings Material: Nickel Plated Brass/ Stainless Steel LED Color: Blue/Green/Red Installation:Drill a 19mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color coded for your safety and convenience). Lastly connect the 2 contacts for the LED. Specifications: Action: (ON)-(ON)-OFF Color: Blue/Green/Red Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs Quick Guide (pdf)Brochure (pdf)

    $48.00

  • Bluewater 22mm Electronic Deutsch Connector f/Nav/Anchor w/5-Wire Pigtal - 4' Lead [9053-3914-248]

    Bluewater Bluewater 22mm Electronic Deutsch Connector f/Nav/Anchor w/5-Wire Pigtal - 4' Lead [9053-3914-248]

    22mm Electronic Deutsch Connector for Nav/Anchor with 5-Wire Pigtal - 4' LeadThe proprietary Deutsch style connectors are designed for fast, clean, and reliable switch installations in the most demanding environments. Whether you are working with 19mm or 22mm switches, these connectors offer a secure, IP69k-rated, sealed connection that protects against dust, water, and corrosion. They will continue to perform even when fully submerged.Color-coded wiring makes it easy to identify input, output, ground, and LED leads, reducing setup time and wiring errors. When it is time to replace a switch, there is no need to untangle your entire panel. Pop the connector off and install a new switch.Purpose-built for marine, automotive, and industrial applications, these one-of-a-kind, patented connectors provide rugged reliability, simplified service, and clean cable management - all backed by their tough IP69K waterproof rating, which withstands the harshest conditions.Specifications: Available in 19mm or 22mm Uses 3 DT-style female terminals and 2 DTP-style female terminals. IP69K Waterproof Rating

    $20.00

  • Bluewater 22mm Electronic Deutsch Connector w/4-Wire Pigtail [9053-3914-112]

    Bluewater Bluewater 22mm Electronic Deutsch Connector w/4-Wire Pigtail [9053-3914-112]

    22mm Electronic Deutsch Connector with 4-Wire PigtailThe proprietary Deutsch style connectors are designed for fast, clean, and reliable switch installations in the most demanding environments. Whether you are working with 19mm or 22mm switches, these connectors offer a secure, IP69k-rated, sealed connection that protects against dust, water, and corrosion. They will continue to perform even when fully submerged.Color-coded wiring makes it easy to identify input, output, ground, and LED leads, reducing setup time and wiring errors. When it is time to replace a switch, there is no need to untangle your entire panel. Pop the connector off and install a new switch.Purpose-built for marine, automotive, and industrial applications, these one-of-a-kind, patented connectors provide rugged reliability, simplified service, and clean cable management - all backed by their tough IP69K waterproof rating, which withstands the harshest conditions.Specifications: Available in 19mm or 22mm Uses 3 DT-style female terminals and 2 DTP-style female terminals. IP69K Waterproof Rating

    $10.50

  • Blue Sea 8121 - 5 Position Contura Switch Panel w/Dual USB Chargers - 12/24V DC - Black [8121]

    Blue Sea Systems Blue Sea 8121 - 5 Position Contura Switch Panel w/Dual USB Chargers - 12/24V DC - Black [8121]

    8121 - 5 Position Contura Switch Panel with Dual USB Chargers - 12/24V DC - BlackDesigned for open-cockpit and flybridge applications using switches to complement existing controls commonly used on many boats.Features: Includes 12/24V DC, 4.8A Dual USB chargers with intelligent device recognition that maximizes charge rate Designed for 12 or 24V DC systems Watertight mounting gasket ON indicating LEDs embedded in all switches Technical Specifications: Nominal Voltage - 12/24V DC Operating Current - 18mA per switch Switch Rating - 20A@12V and 15A@24V DC USB - 12/24V Dual USB Charger 4.8A  Dimensions (H x W x D) - 7.5" x 5.25" x 3" (190.5 x 133.35 x 76.2mm) In the Box: 8121 Panel Labels Mounting hardware *Sold as Individual  Specifications: AC/DC: DC Voltage: 12/24 Box Dimensions: 5"H x 7"W x 12"L WT: 1.3 lbs UPC: 632085081218

    $207.99

  • Blue Sea 5255 MIDI/AMI Fuse 80 Amp - Pair [5255]

    Blue Sea Systems Blue Sea 5255 MIDI/AMI Fuse 80 Amp - Pair [5255]

    Fuse MIDI/AMI 80A - PairFeatures: Compact fuse with 80A amperage Tin-plated copped for corrosion resistance Clear cover offers visible indication of blown fuses Color-coded for easy amperage identification Ignition protected to SAE J1171 when used with Blue Sea Systems SafetyHub family of products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 80a Fuse Type: MIDI/AMI Type: Fuses Box Dimensions: 1"H x 2"W x 3"L WT: 0.05 lbs UPC: 632085052553 Brochure (pdf)

    $6.99

  • Blue Sea 7720 MIDI/AMI Safety Fuse Block [7720] Blue Sea 7720 MIDI/AMI Safety Fuse Block [7720]

    Blue Sea Systems Blue Sea 7720 MIDI/AMI Safety Fuse Block [7720]

    MIDI or AMI Safety Fuse Block Ignition protected for installation aboard gasoline or diesel powered boats Sealed cover protects fuses from the harsh marine environment Insulating cover satisfies ABYC/USCG insulation requirements Cover breakouts allow wire access in any direction 200A maximum with 2/0 cable Accepts Blue Sea Systems Square Format standard or custom label Fuses sold separately WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Fuse Type: MIDI/AMI Type: Fuse Blocks Box Dimensions: 2"H x 4"W x 8"L WT: 0.49 lbs UPC: 632085077204 Brochure (pdf)

    $35.99

  • Blue Sea 5184 125A Fuse Terminal [5184]

    Blue Sea Systems Blue Sea 5184 125A Fuse Terminal [5184]

    Terminal FuseColor: GreenAmperage: 125A Interrupt Rating satisfies ABYC requirements for DC Main circuit protection on large battery banks Ignition protected-safe for installation aboard gasoline powered boats Clear window-visual indication of blown condition Must be used with terminal fuse block WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 125a Fuse Type: Terminal Type: Fuses Box Dimensions: 1"H x 4"W x 4"L WT: 0.1 lbs UPC: 632085051846

    $15.99

  • Blue Sea 8236 DC Digital Ammeter [8236] Blue Sea 8236 DC Digital Ammeter [8236]

    Blue Sea Systems Blue Sea 8236 DC Digital Ammeter [8236]

    DC Digital Ammeter Displays amperage from -500 to +500 Amps 3 levels of display brightness Splashproof front Manual sleep mode blanks display for power conservation Standard meter operates in negative side of circuit only. Shunt Shifter required for positive side installation such as alternators Includes 500 Amp shunt Applicable for 12, 24, 32, 36, and 42 Volt DC systems WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

    $218.99

  • Blue Sea 5131 250A ANL Fuse [5131] Blue Sea 5131 250A ANL Fuse [5131]

    Blue Sea Systems Blue Sea 5131 250A ANL Fuse [5131]

    5131ANL Fuse250A Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats Silver-plated connector blades for corrosion resistance Visible indication of blown condition 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks For use with Blue Sea Systems' ANL Fuse Blocks WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 250a Fuse Type: ANL Type: Fuses Box Dimensions: 1"H x 3"W x 5"L WT: 0.05 lbs UPC: 632085051310

    $31.99

  • Blue Sea 2202 Red Terminal Feed Through Connectors [2202]

    Blue Sea Systems Blue Sea 2202 Red Terminal Feed Through Connectors [2202]

    Terminal Feed Through ConnectorsEliminates chage and provides strain relief when passing high current through hulls, decks and bulkheads.Features: Perfect for passing high current cables through hulls, decks and bulkheads Large cables passed through holes are subject to chafing even when protective grommeting is used. Terminal Feed Through Connectors eliminate chafing and provide excellent strain relief for the cable Large size terminals have a mounting face that can be gasketed or bedded to provide a water tight installation Rated IP66 — withstands water from heavy seas WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $22.99

  • Ancor 14/2 AWG Duplex Cable - Red/Black - Sold By The Foot [1215-FT]

    Ancor Ancor 14/2 AWG Duplex Cable - Red/Black - Sold By The Foot [1215-FT]

    14/2 AWG Duplex Cable - Red/Black -  Sold By The Foot Ancor is the original Marine Grade® wire.  This means that all of our wire and cable is built to withstand the harsh marine environment.  Proprietary jacketing material is extremely UV and corrosion resistant.  Individually tinned wire strands ensure optimal conductivity.  Features: Ultra flexible Highly flexible color coded wire insulation Stranded, tinned copper conductors Compliances: UL Standard - 1426  U.S.C.G - Title 46 ABYC  Technical Specifications: Conductor - Type III  Insulation -40 °C to 105 °C flexible Voltage Rating - 600-V Resistant to - salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation  No. of Conductors - 2 Type of Cable - Duplex  *Sold by the Foot Specifications: Color: Red/Black Gauge: 14/2 AWG Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 12"L WT: 0.1 lbs

    $1.04

Electrical
Footer image

© 2026 REBELLION MARINE, Powered by Shopify

    Login

    Forgot your password?

    Don't have an account yet?
    Create account