Pulley Kit for Yanmar 3JH5, 3JH4-E, 4JH4-E, 4JH5, 4JH5-EAltMount® Serpentine Pulley Conversion Kit for Yanmar Diesel EnginesYanmar Engines Covered: 3JH5, 3JH4-E, 4JH4-E, 4JH5Kit Includes: Three Ten-Groove (J10) Pulleys, Two J10, 44.5″ Circumference Serpentine Belts (one spare) & Mounting HardwareNote:  If you specify an AT-200A Alternator, a longer belt length may be required.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

32-12-50 DC ConverterConvert 20-50 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.)Features: Excellent Regulation: Output voltage maintained within 1% under all line and load conditions within the rating The heat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and the long life of components Polyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum cases with heavy-duty shock mounts assure survival in hostile environments Numerous Converter and Load Protection Circuits:Current limiting Automatic thermal shutdown Short circuit proof Reverse polarity Overvoltage protection Carries CE mark Specifications: Input Voltage: 20-50 Output Voltage: 13.6 Output Amps (Intermittent): 50 Output Amps (Continuous): 40 Case Size (H x W x D): 6.2 x 6.8 x 18.1 inches (15.7 x 17.3 x 46.0 centimeters) Weight: 16 lb. (7.3 kg) Output: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify) Ripple: 150 mV P-P maximum Regulation: 1% Line/Load Switching Frequency: 40 kHz Efficiency: 85% – Typical. Isolation: Output/Chassis; Input/chassis: 250 VDC Duty Cycle Ratings*: Intermittent: 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating. Continuous: 24 hours, 100% duty *24-12-3: 2-minute max. on time Idle Current: Less than 100 mA (including power “ON” light) Operating Temp Specifications: 0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C. Thermal shutdown @ 70 degrees C Case Temperature Model 24-12-3: Full output -25 degrees to +30 degrees C; Derate linearly from 100% @ +30 degrees C to 45% @ +50 degrees C Mechanical Specifications: Powder-coated aluminum heat sink case Front panel terminal block Heavy-duty mounting flange Conformal coated PC board Options: Operation as a battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory) Extreme vibration mounting kit. (Information below) Option: Extreme Vibration Mounting KitThe Extreme Vibration Mounting Kit is available to protect Newmar power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles. The kit replaces the standard vibration kit provided with the unit. It fits into the unit’s mounting flange to act as a ‘super shock absorber’ for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units that weigh 2–15 lbs. and Kit H for 16–7 lbs.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

GI-30-FS Galvanic Isolator 30A Fail SafeInstalling the Galvanic Isolator between the AC safety ground and DC bonding system blocks most of the low-voltage currents and corrosive action seen on the vital metallic components in the saltwater. With the low voltage current blocked, the galvanic corrosion effect on the sacrificial anodes is significantly reduced, while the integrity of the critical safety ground path is maintained. This means a significant saving in boat haul-out fees and zinc replacement costs. For additional safety, all units feature a large capacitor, providing a secondary low-impedance path for sending AC current to the ground.Newmar’s latest galvanic isolator meets the latest ABYC A-28 2019 requirements, including being a failsafe. This design can meet the strictest temperature and current tests to create a robust solution for galvanic protection.Features: Protects against corrosion Maintains a safe environment Certified to the UL1500 standard for Ignition Protection Tested to a 50 degrees C ambient temperature The 30A fail-safe feature ensures ground maintenance Connection in the event of isolator failure Specifications: Shore Power Voltage: 115–230V    Maximum Short Circuit: 5000 Amps Stray Current Protection: Up to 1.4 VDC Dimensions (LxWxH): 200 x 189 x 68.5 mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Alternator 170 AMP 12V 3.15" Dual Foot Saddle J10 PulleyAlternator, XT Series, 170A, 12V, Saddle Mount (Dual Foot), 3.15in, J10 AltMount Serpentine Pulley, Case GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: AT-DF-165-12-IG, AT-DF-165-J10This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 170A Voltage: 12v Box Dimensions: 9"H x 10"W x 10"L WT: 14 lbs UPC: 676205503631 Brochure (pdf)

Read more less

Alternator 170 AMP Kit 12V 3.15" Dual Foot Saddle K6 Pulley Regulator & Temp SensorKit Includes: XT-DF-170-K6 Alternator, MC-618 Regulator, Temperature Sensors & Mounting HardwareXT Series Alternator: 170A, 12V, Saddle Mount (Dual Foot), 3.15in, K6 Serpentine Pulley, Case GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: AT-DF-MC-165-KIT, AT-DF-165-K6-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 170A Voltage: 12v Box Dimensions: 10"H x 11"W x 14"L WT: 17.5 lbs UPC: 676205503594 Brochure (pdf)

Read more less

Alternator 120 AMP Kit 120V 3.15" Dual Foot Saddle J10 Pulley Regulator & Temp SensorKit Includes: a 60-120-J10 Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware60-120-J10 Alternator: 120A, 12V, Saddle Mount (Dual Foot), 3.15in, J10 AltMount Serpentine Pulley, Isolated GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: 60-YP-MC-120-SR-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 120A Voltage: 12v Box Dimensions: 11"H x 11"W x 14"L WT: 16.1 lbs UPC: 676205751155 Brochure (pdf)

Read more less

Alternator 100 AMP 12V 3.15" Dual Foot Saddle K6 Pulley with Isolated GroundAlternator, 60 Series, 100A, 12V, Saddle Mount (Dual Foot), 3.15in, K6 Serpentine Pulley, Isolated Ground Hitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: 60-100-SR-IGThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 100A Voltage: 12v Box Dimensions: 9"H x 9"W x 10"L WT: 13 lbs UPC: 676205750578 Brochure (pdf)

Read more less

170 AMP Alternator Kit - 12V 4" Dual Foot Saddle Mount with K6 Pulley, Regulator & Temp SensorBalmar offers a wide range of alternator power upgrades designed specifically for marine industry applications. They install high-reliability bearings, robust rectifier diodes, and improved heat-sinking capabilities on all their alternators to ensure improved system reliability combined with increased charging power.Kit Includes: XT-DF4-170-K6 Alternator, MC-618-H Regulator, Temperature Sensors & Mounting HardwareFeatures: 4" Dual-Foot K6 Serpentine Pulley 170A 12V Case Ground J-180 Mount; Typical for John Deere, Cummins, & Caterpillar Engines This product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 170A Voltage: 12v Box Dimensions: 11"H x 11"W x 14"L WT: 18.35 lbs UPC: 676205503471 Brochure (pdf)

Read more less

Alternator 170 AMP Kit 12V 3.15" Dual Foot Saddle J10 Pulley Regulator & Temp SensorKit Includes: XT-DF-170-J10 Alternator, MC-618 Regulator, Temperature Sensors & Mounting HardwareXT Series Alternator: 170A, 12V, Saddle Mount (Dual Foot), 3.15in, J10 AltMount Serpentine Pulley, Case GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: AT-DF-MC-165-KIT, AT-DF-165-J10-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 170A Voltage: 12v Box Dimensions: 10"H x 11"W x 14"L WT: 17 lbs UPC: 676205503648 Brochure (pdf)

Read more less

Communication Cable SG2320 (N2K) & SG240 (RB-C) M12 - 12"Com Cable connecting to an RV-C CANbus Network via an M12 DeviceNet Connector.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Alternator 250 AMP 12V 3.15" Dual Foot Saddle J10 PulleyAlternator, XT Series, 250A, 12V, Saddle Mount (Dual Foot), 3.15in, J10 AltMount Serpentine Pulley, Case GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: AT-DF-200-12-IG, AT-DF-200-J10This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 250A Voltage: 12v Box Dimensions: 9"H x 10"W x 10"L WT: 16.25 lbs UPC: 676205502269 Brochure (pdf)

Read more less

Alternator 100 AMP Kit 12V 1-2" Single Foot Spindle Mount K6 Pulley Regulator & Temp SensorKit Includes: 621-100-K6 Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware621-100-K6 Alternator: 100A, 12V, Spindle Mount (Single Foot), 1-2in, K6 Serpentine Pulley, Isolated Ground1" Motorola-Style Mounting;  Typical for Westerbeke, Lehman, Hino & Pathfinder Engines2" Delco-Style Mounting;  Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based EnginesReplaces: 621-VUP-MC-100-SR-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 100A Voltage: 12v Box Dimensions: 10"H x 11"W x 14"L WT: 9.25 lbs UPC: 676205750943 Brochure (pdf)

Read more less

Max Charge MC-618 Regulator 12V with Harness Multi-StageThe MC-618-H premium 12-volt multi-stage voltage regulator provides the ultimate in charging safety and control. Includes wiring harness. Features: Intelligent multi-stage regulation. Digital numeric LED display. Epoxy-encapsulated circuitry. For use with 12 volt systems Wiring harness included Can be used to drive twin alternator installations. For use with P-type externally regulated alternators Dash lamp and auxiliary lamp terminals Small engine mode Magnetic programming tool included LiFePo4 (lithium) program Optional alternator and battery temperature sensors sold separately This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

621 Series 120A Kit with MC-618 Regulator, T-Sensor, K6 Pulley, Single Foot & Mounting HardwareKit Includes:  621-120-K6 Alternator MC-618 Regulator Temperature Sensors Mounting Hardware 621-120-K6 Alternator: 120A, 12V, Spindle Mount (Single Foot), 1-2in, K6 Serpentine Pulley, Isolated Ground1" Motorola-Style Mounting;  Typical for Westerbeke, Lehman, Hino & Pathfinder Engines2" Delco-Style Mounting;  Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based EnginesThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage: 12v Amperage: 120A Box Dimensions: 10"H x 10"W x 14"L WT: 7.46 lbs UPC: 676205750950 Quick Guide (pdf)

Read more less

Alternator 3.15" Dual Foot Saddle J10 Serpentine Pulley - 170A - 12VBalmar offers a wide range of alternator power upgrades designed specifically for marine industry applications. Balmar installs high reliability bearings, robust rectifier diodes and improved heat-sinking capabilities on all our alternators to ensure improved system reliability combined with increased charging power.Features: 3.15" Dual Foot Saddle J10 Serpentine Pulley 170A 12V This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage: 12v Amperage: 170A Box Dimensions: 9"H x 10"W x 10"L WT: 13.8 lbs UPC: 676205500777 Brochure (pdf)

Read more less

Temp Sensor Battery - 20'Temperature Sensor, Battery - 20' LengthThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Actuator - 'NAV/ANC' for V Series Contura Switches - Black - Laser Etched (Top/Bottom Light)Laser-etched switch covers are the highest level of quality that you can achieve. They offer a clean, crisp look that has to be seen to be believed. With laser precision, our switch covers offer a flawless finish you simply cannot match with other methods. Many of the etched switch covers we offer are available in either single or dual-light formats. This means that users can get the type you need to match the look they want. With laser-etched switch covers, users get a permanent marking solution that will not chip, peel, or fade over time. Pacer currently offers over 225 options of etched switch covers. Choosing the right etched switch cover is not an easy task. Contact a Pacer expert today with any questions that you may have. Features: A permanent marking solution Fits V Series Contura switches Resistant to UV exposure Easy to install Low light visibility Specifications: Number of Bulbs: Two lenses Etched Symbol: NAV LIGHTS | ANCHOR LIGHTS *Sold as an individual

Read more less

RG8XW Coax Cable - White - 200'Coaxial cable RG8XW is used in the transmission of communications signals. Frequently, audio, video, or network signals. You will recognize these cables if you have looked at the back of your cable box or modem. Most people don't even know that the real name of these cables is actually coaxial. Many people call them coax. So, what does coax, or coaxial, mean?The term coaxial means the cable has two concentric conductors separated by insulating material. The inner conductor is contained by a cylindrical material that insulates it. This material is then surrounded by a conducting shield. In certain cases, there may even be another insulating layer after the shield. Most commonly, the inner conductor carries the signal-carrying voltage while the shield is kept at ground potential. One advantage of this design is that magnetic and electric fields are bound within the insulating material. This reduces leakage outside the shield.So what is RG8XW? Well, this style of coax is often used for single antenna installations. It can also be used for jumpers when close pieces of equipment need to be connected. You may hear of this cable as being referred to as "Mini-8". This cable will always possess a stranded center, which distinguishes it from most other types of coax. It will handle high wattage and offer multiple benefits, such as higher propagation velocity. Generally, this cable is more than what the average user will require. However, if you are looking to have a strong setup, then this cable is for you.Specifications: Conductor AWG: 16 (19x.0117) Tinned Copper Insulation Material: Foam Polyethylene  Shield Coverage: 95% Tinned Copper Braid Jacket Material/Nom. O.D.: White PVC 0.242 Nom. Cap pF/ft:  27.0 Velocity of Prop. (% pF/m): 80 Nominal Impedance (Ohms): 50

Read more less

Motor Reversing ModuleThe forward and reverse module automatically reverses the direction of the motor when the appropriate control circuit is energized with a pulse from a control switch. Dynamic breaking stops the motor when the switch returns to Off. Ideal for tarp or lift applications as well as for use on hoists, hatches, winches, snowplows, intake/exhaust fans, vehicle outriggers, and other reversing applications. Low-profile module saves space. Studs are securely anchored in epoxy. Tin-plated brass studs and hardware for corrosion resistance. Quick Guide (pdf)

Read more less

16 AWG Gauge Striped Marine Wire 500' Spool - White with Red StripeStriped wire is great for situations where someone is dealing with a large number of wires. Using striped wire makes identification easier. This, in turn, can increase job efficiency. All of Pacer's 16 AWG striped marine wire is manufactured in Sarasota, FL, USA, from Type III Class K tinned copper. During the production process, the copper conductors are jacketed with PVC insulation. This jacket is designed to be durable and flexible. All of Pacer's primary striped wire meets the requirements and standards of UL, ABYC, and NMMA.How many options of 16 AWG striped marine wire does Pacer offer? The most important thing when selecting the proper striped wire is choice. By offering an enormous section, users are guaranteed to find the perfect choice. Currently, there are over 100 possible combinations of 16 AWG striped marine wires. Have a question about striped marine wire? Contact a Pacer expert today. This particular white marine wire has a red stripe and comes in a 500 ft. spool.Features: Stranded, tinned copper conductors Highly flexible color-coded insulation Annealed Finely Stranded Tinned Copper ASTM b172 Class K Resistant to: Acid, Alkali, Abrasion, Flame, Gasoline, Oil, Moisture Specifications: Spool Length: 500 ft. Insulation: -20 degrees C to 105 degrees C Flexible, Color Coded PVC Temperature Rating: 105 degrees C Dry, 75 degrees C Wet, 60 degrees C Oil Voltage Rating: 600-V Applications: Point-to-point wiring Internal wiring of panels and motors Compliances: UL Standard 1426 (BC-5W2) AWM 1015/1230 AWM 1028/1231 MTW, CSA: TEW ABYC: E-8.14, E-9.14, Coast Guard: 33 CFR part183 Specifications: Color: White Gauge: 16 AWG Length (Feet): 500' Box Dimensions: 6"H x 7"W x 7"L WT: 7.5 lbs UPC: 840248226714 Brochure (pdf)

Read more less

Red 16 AWG Primary Wire - 250' Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 16 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 16 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: Red Gauge: 16 AWG Length (Feet): 250' Box Dimensions: 3"H x 7"W x 7"L WT: 4 lbs UPC: 840248201681 Brochure (pdf)

Read more less

White 14 AWG Primary Wire - 100'Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 14 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 14 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: White Gauge: 14 AWG Length (Feet): 100' Box Dimensions: 3"H x 5"W x 5"L WT: 2.15 lbs UPC: 840248202299 Brochure (pdf)

Read more less

Yellow 4/0 AWG Battery Cable - 50' Pacer's 4/0 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Marine installations can occur in tight, enclosed spaces that have sharp turns where the installation process can quickly become difficult. Pacer makes the installation process easier.  How?  By creating a flexible yet tough marine cable.  This 4/0 AWG marine battery cable can handle the toughest environments.  This marine battery cable is made from Type III tinned copper.  The copper resists corrosion and helps to extend the life of the marine cable. Then, the cable is insulated with a durable and flexible PVC jacket.  These things all come together to make the highest quality marine cable available.Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold as an Individual Specifications: Color: Yellow Gauge: 4/0 AWG Length (Feet): 50' Box Dimensions: 9"H x 12"W x 12"L WT: 44 lbs UPC: 840248204569 Brochure (pdf)

Read more less

Green 10 AWG Primary Wire - 100'Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 10 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 10 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: Green Gauge: 10 AWG Length (Feet): 100' Box Dimensions: 3"H x 7"W x 7"L WT: 4.9 lbs UPC: 840248202930 Brochure (pdf)

Read more less

Yellow 2/0 AWG Battery Cable - 50' Pacer's 2/0 AWG Marine Battery Cable meets and exceeds the most stringent specifications. This UL-approved marine cable is manufactured in the USA to ensure high quality.  Marine installations can occur in tight, enclosed spaces that have sharp turns where the installation process can quickly become difficult. Pacer makes the installation process easier.  How?  By creating a flexible yet tough marine cable.  This 2/0 AWG marine battery cable can handle the toughest environments.  This marine battery cable is made from Type III tinned copper.  The copper resists corrosion and helps to extend the life of the marine cable. Then, the cable is insulated with a durable and flexible PVC jacket.  These things all come together to make the highest quality marine cable available.Features: Easy to strip, bend, and route Excellent flexibility with the durable properties of PVC Technical Specifications: Conductor - Annealed fine stranded tinned copper ASTM B172 Class K Insulation  -20 °C to 105 °C Flexible, Color Coded PVC Temperature Rating - 105 °C Dry, 75 °C Wet, 60 °C Oil Voltage Rating - 600V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, and Moisture *Sold as an Individual Specifications: Color: Yellow Gauge: 2/0 AWG Length (Feet): 50' Box Dimensions: 7"H x 10"W x 10"L WT: 26.55 lbs UPC: 840248204354 Brochure (pdf)

Read more less

Red 10 AWG Primary Wire - 100'Pacer's marine wire is designed to handle the harshest marine environments.  It is manufactured to meet and exceed the most stringent specifications.  This 10 AWG marine wire is constructed in the USA to achieve the highest level of quality. Built from Type III class K tinned copper, this wire offers excellent flexibility.  The tinned copper also resists corrosion adding to the life of the wire.  What about the insulation?  After the copper is tinned it is then insulated with a durable and flexible PVC jacket.  The jacket makes this 10 AWG marine wire resistant to alkali, abrasion, acid, gas, oil, flame, and moisture.  What standards and compliances does this wire meet?  Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA. Features: Built for durability, flexibility, and longevity in the harshest marine environments  So flexible that you can tie it into a knot without compromising any of its qualities  Proprietary insulation ensures the highest level of protection available  Ease of installation and the longevity of its design have helped solidify this marine wire as the choice of boating professionals Compliances: UL Standard - 1426 BC-5W2 U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture *Sold as an Individual Specifications: Color: Red Gauge: 10 AWG Length (Feet): 100' Box Dimensions: 3"H x 7"W x 7"L WT: 4.9 lbs UPC: 840248203098 Brochure (pdf)

Read more less

BlueSolar PWM Charge Controller (DUO) LCD & USB Charge Control - 12/24VDC - 20AFeatures: Liquid Crystal Display Two 5 Volt USB outputs Lighting control function, fully programmable   Three-stage battery charging (bulk, absorption, float), fully programmable Load output with low voltage and manual disconnect (programmable) Load output protected against overload and short circuit Protected against reverse polarity connection of the solar panels and/or battery Charges two separate batteries Programmable charge current ratio External Temperature sensor Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Brochure (pdf)

Read more less

PROLITE Series Dolphin Battery Charger - 12V, 15A, 110VAC - 2 OutputsDolphin Chargers are known as a yacht-quality product that is professionally designed and manufactured in Europe with the latest components to be more efficient and reliable than the competition. In 2019, Dolphin set out to create this line of small, water-resistant chargers with the same philosophy for the outboard and gasoline boat markets. The PROLITE chargers are smaller, lighter, and more efficient than the competition and boast the latest in connectivity with a standard Bluetooth interface. Features: The Dolphin Connect App (iOS and Android) will allow you to monitor and control your charger from your mobile device Automatically senses and distributes 100% of available charging amps to any one bank or combination of all banks 40% smaller and 50% lighter than most competitors Includes 6 ft. AC and DC cables and fusing 15 amp has 2 outputs IP 65 water resistant ISO-certified 8846 for use in gasoline boats Works with any battery technology on the market Will charge from 0 VDC Bluetooth interface Simple installation 92% Super efficient 12V - 15A Specifications: Charger Input - Voltage: 110v Charger Output - Amps: 15a Charger Output Voltage: 12v Charging Banks: 2 Portable: No Box Dimensions: 4"H x 6"W x 16"L WT: 3.9 lbs UPC: 786142992150 Owner's Manual (pdf)

Read more less

AC Power Supply 20/25A, 12V Out, 85-265V InThe PWI320 Intelligent Power Supply delivers a full 300 watts of output power for communications, control or a wide variety of other devices. It is fully Digital Signal Processor controlled and feature Universal Input Voltage from 85 to 265 VAC at 50 or 60 Hz with Active Power Factor Correction for the most efficient use of AC power.The Power Supply is preset to the same voltage as a fully charged battery of the nominal output voltage (ie. 13.6V for a 12V model, etc.). The voltage can be adjusted over a reasonable range using the front panel controls, or the PowerWizard software that is free to download from www.analyticsystems.com.Seven dual color LEDs clearly indicate output current levels as well as indicating faults with the Power Supply. Safety features include Power Supply over temperature shutdown, current limiting, short circuit protection, input under voltage shutdown and output overvoltage protection all with automatic recovery.  PWI320MW model available with MIL connectors, extra input and output filtering and sealed to IP66Features: Digital Signal Processor controlled Universal worldwide AC input Computer programmable Simple front panel controls Easy connection to loads High Vibration Rugged Duty Dry Contact Output Fail Relay Carrying Handle Canbus / RS232 / Remote Control port Five year parts and labour warranty Specifications: Charger Input - Voltage: 85-265v Charger Output - Amps: 20-25a Charger Output Voltage: 12v Box Dimensions: 7"H x 11"W x 12"L WT: 8.3 lbs

Read more less

MultiPlus Inverter/Charger 12 VDC - 3000VA - 120AMP Battery Charger - 50AMP Transfer Switch (UL LISTED)Features: Multifunctional -The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Unique PowerAssist feature - The MultiPlus will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery Uninterrupted AC power (UPS function) -  In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Virtually unlimited power thanks to parallel operation -Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities. Remote Monitoring and Control - Monitor and control your MultiPlus and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more... Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Inverter Output Voltage: 120v Inverter Input Voltage: 9.3-17v Inverter Cont. Output Wattage: 3000w Outlet Qty: None Charger Output Voltage: 12v Charger Output - Amps: 120a Charger Input - Voltage: 94-140v Charging Banks: 1+1 Box Dimensions: 13"H x 13"W x 18"L WT: 49.25 lbs UPC: 8719076046615 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Marine 12-Volt Power Outlet Marine quality 12-volt outlet Designed to for replacing or adding outlets in your boat RV or camper Surface mount WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

DeckHand Dimmer - 25 Amp/12V Works with all incandescent and non-regulated LED lamps Memory for last setting Illuminated exit with adjustable time delay Provides continuous voltage control from 0 to 100% of input voltage Offset mounting tabs allow dimmers to be mounted close together Retail package includes momentary (ON)-OFF-(ON) switch WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Box Dimensions: 2"H x 4"W x 8"L WT: 0.66 lbs UPC: 632085075088 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

800W Modified Sine Wave Inverter - 12VSAM Series low interference, high efficiency modified sine wave DC-AC inverters convert 12 VDC to 115 VAC at an output frequency of 60 Hz.Features: USB charging port +5 VDC, 2.1A 2 three prong outlets Compact design Load controlled cooling fan 2 X Surge Low battery input alarm Universal protection circuit: thermal, battery, overload, short circuit, earth fault Soft start technology Cool surface technology Low interference technology Specifications: Input: 12 VDC Output: 115 VAC Watts: 800 Watts Surge: 1600 Watts Outlets: 2 Weight: 4.5 (lbs) Weight: 2.05 (kg) Dimensions: 8 x 7 x 2.25 (in) Dimensions: 20.3 x 17.8 x 5.7 (cm) Safety: ETL Warranty: 2 Year Limited Applications: Television (up to 32") Portable Vaccum Blender Laptops Cell Phones Cameras MP3 Players Handheld Video Games Lights/Lamps Portable Stereos CD/DVD Players WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Inverter Cont. Output Wattage: 800w Inverter Input Voltage: 12v Waveform: Modified Sine Wave Box Dimensions: 3"H x 11"W x 12"L WT: 4.1 lbs UPC: 622988078095 Owner's Manual (pdf)Brochure (pdf)

Read more less

Remote Control f/EVO Series Inverter/ChargersRemote Control for Inverter/Chargers EVO-2212, EVO-3012, EVO-2224, EVO-4024The EVO-RC is intelligent remote control designed specifically for use with NEW Samlex EvolutionTM Series of Inverter/Chargers.View real-time activity on the informative 32 character LDC screen while the unit is operating: Output voltage, Frequency, Amps, Watts, Volt Amps, Power Factor, Battery Voltage, Battery Current, Solar Input Current and more.Use the remote to program inverter and battery charging parameters. Save a parameter set on a removable 16GB SD Card (the SD card slot located on the remote face of the EVO-RC). Transfer saved parameters to other EVOTM inverter/chargers or insert the SD card into a computer and make parameter adjustments there.Data log historic power consumption, inverter functionality, battery charging activity, faults and all of the conditions leading up to them. Analyze trends for more efficient use of off-grid resources.Features: SD card slot can manage a removable SD Card up to 16GB (SD Card not included) Inverter/Charger performance data is logged in text file format on the SD card that can imported into Excel You do not need the EVO-RC for basic operation of the inverter/charger, but it is required to program parameters and for data logging Includes 33' of cable Applications: Boats, RVs, trucks, specialty vehicles Alternative energy, off-grid, cabins, remote locations, areas with unreliable utility power Back-up and emergency power applications WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)

Read more less

ConnectPro® 3-Wire ReceptacleFeatures: Universal design for 2 or 3-wire configuration 12, 24, 12/24, 24/36 or 36 volt systems Watertight sealing cap Corrosion resistant, plated brass electrical components Drain holes in receptacle keep water away from electrical components Perma-Lock screw terminals will not loosen under extreme hull vibrations Standard 1-1/8" diameter mounting hole Easy to install, with supplied mounting plate for front panel installation, or locking ring for rear access installation Accepts 10 and 8 gauge wire Easily replaces other trolling motor plugs and receptacles WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Receptacles Box Dimensions: 2"H x 5"W x 6"L WT: 0.2 lbs UPC: 093344304651 Quick Guide (pdf)Brochure (pdf)

Read more less

10 Gauge Battery Charger Utility ConnectionThis quick connect system is designed to quickly and easily hook up a 12 Volt trolling motor, battery charger, light, radio, depth finder, or other equipment quickly, by just snapping the connectors together.Self-cleaning marine-grade connectors last for years. This device has endless uses for the outdoors, can be used for Boats, ATVs, RVs, Ice Houses, Agricultural Equipment, Solar Panels, or anywhere you want to share a quick and easy connection with one or multiple batteries, the uses are endless.Once your Connect-Ease is installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly. Just snap the connectors together and you're done!Features: 10 gauge marine grade wire with Heat shrinkable butt splice Single use lead for chargers, lights, small trolling motors, and more Plug & Play Connections are Lithium Compatible Suitable for use t-40° to 221° Lithium Compatible UL1426 Tinned Marine Grade Wire - One year Warranty – Salt Water Approved 10 AWG 5 “ Device Connections 50 AMP Rating Made In the USA

Read more less

Replacement Alternator for Mercury Engines - 135 & 150 HPReplacement alternator that will fit Mercury Outboard Engines 135 HP - 150 HP, 12 Volt, 55 AMP, 4 grooves, pulley included. Features: All alternators are engineered for performance and reliability. All alternators are engineered and manufactured with precision and quality. All alternators must meet or exceed OEM performance before being boxed. Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: MERCURY Alternator 8M0065239 MERCURY Alternator 8M0057693  MERCURY Alternator 8M0062515 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

DT Deutsch Socket for 14-18 AWG Plug - Size 16 Contact (25 Pack)Deutsch machined contacts are for use with almost the entire line of Deutsch connectors and are ideal for marine conditions. They are known for their reliability and durability, which are just a few of the reasons that professionals turn to these contacts for repeatable and reliable results. Another benefit of these contacts is that they are simple to use and require little time for installation.Features: Easy to install Field serviceable Applications: Cable-to-cable applications Enclosed connectors offer field-proven reliability and rugged quality Compliances: Ingress Protection (IP) Level: IP68 and IP6K9K RoHS UL Recognized Characteristics:Hand-insertable contactsSpecifications: Package Size: 25 sockets Contact Size: 16 Wire Size: 14 Operating Temperature: -55°C to 125°C Current Rating: 7.5-25

Read more less

Yellow 6 AWG Tinned Copper Wire - 50'Ancor Marine Grade wire products are the longest lasting and most rugged available, exceeding UL 1426, ABYC and US Coast Guard Charter boat (CFR Title 46) standards. They are constructed with premium vinyl insulation that is rated at 600V, 105°C dry and 75°C wet, stays flexible even in extreme cold (-40°F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation. Highest quality ultra flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.Wire Gauge: 6 AWGWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Feet): 50' Gauge: 6 AWG Color: Yellow Box Dimensions: 5"H x 7"W x 7"L WT: 6.1 lbs UPC: 091887967821

Read more less

Orion-TR Smart 24/12-20A (240W) Isolated DC-DC ChargerThe Orion-Tr Smart isolated DC-DC charger serves as a DC-DC battery charger or a power supply (also designed for use as a constant voltage source), offering a wide input and output voltage range. This is especially significant in the case of vehicles with a Euro 5 or Euro 6 smart alternator, which often supplies too low charging voltage even when the engine is running or when extended cable lengths, as is often the case in boats and RVs, lead to voltage drops. In such scenarios, precise and controlled charging is imperative to fully charge the service battery while protecting the starter/input battery from discharge.Bluetooth Smart Enabled Any Bluetooth-enabled smartphone, tablet, or other device can be used to monitor, change settings, and update the charger when new software features become available Instant Readout: The VictronConnect App can display key data, including warnings and alarms, on the device list page without the need to connect to the product Fully programmable Battery charge algorithm (configurable) or fixed output. Orion-Tr Smart 12/12-30 Orion-Tr Smart 12/12-30 Smart Alternator Compatibility: engine running detection mechanism Adaptive 3-Stage Charge Algorithm: Bulk – Absorption – Float For lead-acid batteries, it is important that during shallow discharges the absorption time is kept short to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged For lithium batteries, the absorption time is fixed; the default is 2 hours Alternatively, a fixed output voltage can be chosen Suitable for Use in Vehicles with a Smart Alternator (Euro 5 and Euro 6 Engines)The built-in engine shutdown detection will stop the converter when the engine is not running. This prevents unwanted discharge of the starter battery (see manual for details).Remote On/OffA remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example).All Models Are Short Circuit Proof and Can Be Paralleled to Increase Output CurrentAn unlimited number of units can be connected in parallel.High Temperature ProtectedThe output current will reduce at high ambient temperatures.IP43 ProtectionWhen installed with the screw terminals oriented downward.Screw TerminalsNo special tools are needed for installation. Input fuse (not replaceable) *Input fuse (not replaceable) Specifications: Input Voltage Range: 16-35 V Under Voltage Shut Down: 14 V Under Voltage Restart: 15 V Nominal Output Voltage: 12.2 V Output Voltage Adjust Range: 10-15 V Output Voltage Tolerance: +/- 0,2 V Output Noise: 2 mV rms Cont. Output Current at Nominal Output Voltage and 40 Degrees C: 20 A Maximum Output Current (10 S) at Nominal Output Voltage minus 20%: 25 A Short Circuit Output Current: 50 A Cont. Output Power at 25 Degrees C: 300 W Cont. Output Power at 40 Degrees C: 240 W Efficiency: 88 % No Load Input Current (2): < 100 mA  Standby Current: Less than 1A Can Be Used as Power Supply: Yes, output voltage can be set with Bluetooth  Galvanic Isolation: 200 VDC between input, output, and case  Operating Temperature Range -20 to +55 °C (derate 3 % per °C above 40 °C)  Humidity: Max. 95 % non-condensing  DC Connection: Screw terminals  Maximum Cable Cross-Section: 16 mm²  AWG6  Weight: 1,3 kg (3 lb)  Dimensions (H x W x D):130 x 186 x 70 mm  (5.1 x 7.3 x 2.8 inch)  Protection Category IP43 (electronic components), IP22 (connection area)  Standards: Safety - Emission / Immunity; Automotive Directive - EN 60950 EN 61000-6-3, EN 55014-1 / EN 61000-6-2, EN 61000-6-1, EN 55014-2 ECE R10-5 Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 24v Charger Output - Amps: 20a Charger Output Voltage: 12v Charging Banks: 1 Portable: No Box Dimensions: 4"H x 5"W x 8"L WT: 3 lbs UPC: 8719076046080 Quick Guide (pdf)Brochure (pdf)

Read more less

8/2 AWG Duplex Cable - Flat Cable - Red/Black - 250'Duplex Boat Cable is used in low voltage AC applications as well as DC circuits.  Pacer manufactures 8 AWG Duplex boat cable in house in the USA for the best quality.  First, the cable is built from finely stranded, Type III tinned copper conductors.  These conductors allow for flexibility and help to prevent corrosion. The PVC jacket helps 8 AWG Duplex Boat Cable to be flexible while preventing moisture from accumulating.  How does it do that?  During the extrusion process, the spaces between wires are filled.  This leaves no space for moisture or air to accumulate.  After that, a talcum powder coating is given to the interior wires. This coating is used to allow the outer jacket to be easily removed.  Just another reason 8 AWG Duplex boat cable is perfect for marine use. Pacer's marine wire exceeds the requirements and standards of UL, ABYC, and NMMA.Features: Extruded exterior cable insulation with no gaps Highly flexible color coded wire insulation Stranded, tinned copper conductors Annealed Finely Stranded Tinned Copper ASTM B172 Class K Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil, Moisture Compliances: UL Standard - 1426  U.S.C.G - 33 CFR part 183  ABYC - E-11.14  Technical Specifications: Conductor - Type III annealed finely stranded tinned copper ASTM B172 Class K Insulation -20 °C to 105 °C flexible, color-coded PVC Voltage Rating - 600-V Resistant to - Acid, Alkali, Abrasion, Flame, Gasoline, Oil and Moisture No. of Conductors - 2 Type of Cable - Duplex  *Sold as an Individual Specifications: Color: Red/Black Gauge: 8/2 AWG Length (Feet): 250' Box Dimensions: 12"H x 14"W x 14"L WT: 54 lbs UPC: 840248200486 Brochure (pdf)

Read more less

3 Position DTM Female Connector with Wedge LockThe DTMO4-3P and DTMO6-3S connectors are part of the DTM series and form a complete 3-cavity connection. These Deutsch-compatible connectors are fully interchangeable with matching Deutsch parts.Designed for reliability in harsh environments, the DT series can deliver up to 7.5 amps continuously. This 3-pin DTM connector provides a secure, weather-resistant connection ideal for marine, automotive, and industrial wiring applications.Each 3-pin DTM connector features corrosion-resistant contacts, a rugged housing, and a reliable locking mechanism, ensuring consistent performance and long-lasting electrical connections even in demanding and harsh conditions.Features: Comes in bags of 100 with a separate bag of wedge locks included. Male uses Solid DTM 16-20AWG Machined Terminal. Female uses DTM 16-18AWG Machined Terminal or DTM 18-20AWG Machined Terminal Specifications: Heat Shrink: No Package Qty: 100 Box Dimensions: 0"H x 4"W x 5"L WT: 0.01 lbs UPC: 810196333345 Brochure (pdf)

Read more less

Round Dual USB/USB-C ChargerThis Round Dual Charger provides reliable power for smartphones, tablets, and other USB devices while maintaining a compact, low-profile installation. Ideal for boats, RVs, or other mobile setups, it ensures safe, consistent charging in harsh environments.The charger’s robust construction and waterproof design make the Round Dual USB/USB-C Charger a long-lasting, high-performance solution for modern multi-device power needs.Specifications: Mounting Type: Double D Current Rating: 4.8A (32VDC) USB-C: 45w Fast Charger (4.0) Specifications: Type: Electric Box Dimensions: 2"H x 4"W x 7"L WT: 0.1 lbs UPC: 810196332065

Read more less

3 Position DTM Male Connector with Wedge LockThe DTMO4-3P and DTMO6-3S connectors are part of the DTM series and form a complete 3-cavity connection. These Deutsch-compatible connectors are fully interchangeable with matching Deutsch parts.Designed for reliability in harsh environments, the DT series can deliver up to 7.5 amps continuously. This 3-pin DTM connector provides a secure, weather-resistant connection ideal for marine, automotive, and industrial wiring applications.Each 3-pin DTM connector features corrosion-resistant contacts, a rugged housing, and a reliable locking mechanism, ensuring consistent performance and long-lasting electrical connections even in demanding and harsh conditions.Features: Comes in bags of 100 with a separate bag of wedge locks included. Male uses Solid DTM 16-20AWG Machined Terminal. Female uses DTM 16-18AWG Machined Terminal or DTM 18-20AWG Machined Terminal Specifications: Heat Shrink: No Package Qty: 100 Box Dimensions: 0"H x 4"W x 5"L WT: 0.01 lbs UPC: 810196333307 Brochure (pdf)

Read more less

Combo Kit with ELCI Sensor & 30 Amp Breaker Non-Metallic Door - WhiteFeatures: White Sensor 30 Amp Breaker WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 30a Type: Misc Box Dimensions: 6"H x 6"W x 8"L WT: 2 lbs UPC: 682500440830 Brochure (pdf)

Read more less

30 AMP Inlet and Female Cord Connector Combo - Grey The SmartPlug Combo Kit includes both a 30 AMP 125V Male inlet connector and Female Cord End Connector. The Female Cord End Connector is designed to be used with your existing cord.  This package offers superior performance and ease of use. Features: Eliminates Overheating – Increased pin and clip surface area greatly improves electrical conductivity during high amperage demand. Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark. Multi-Point Locking System – Side clips and inlet cover lock the plug body securely into the inlet which eliminates any stress on the electrical components by movement of the power cord. Weather Resistant Seals – Silicone gaskets installed in the inlet cover and the plug body eliminates moisture penetration. Quick and Easy Installation. *Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 4"H x 9"W x 11"L WT: 1.55 lbs UPC: 614458746139

Read more less

Pro Installer 400A Selector Battery Switch - MC10Power requirements on boats have increased, and these 2 Selector switches offer high power capacity (400 amps continuous), the ability to easily fit doubled cables, and conform to the industry standard mounting footprint (Guest, Perko, Blue Sea). Please note selector switches will not separate electronics from harmful engine starting spikes.SpecificationsMounting: Surface, Rear or FrontVoltage: 48v DC (for 12-48v systems)Rating: 400 Cont / 600 Inter / 1500 CrankDims: 3.85" x 3.85" x 3.62"Operation: 1-2-Both-OffStud: 3x 10 mm (3.8")WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: AFD: No Lockable: No Positions: 1-2-Both-Off Continuous Amperage: 400a Box Dimensions: 4"H x 7"W x 8"L WT: 1 lbs UPC: 843687007760 Owner's Manual (pdf)Brochure (pdf)

Read more less

C-Series TogglePN: 7365Poles: 2Color: WhiteAmperage: 30AFeatures: 5,000 Ampere interrupt capacity to meet ABYC requirements for 120/240 Volt 50 Ampere main protection Double pole used as 120 volt AC main circuit breaker to switch hot to neutral Triple pole used as 240 volt AC main circuit breaker to switch lines (hot) and neutral Double and triple pole circuit breakers will trip all poles will trip if any one pole trips Trip Free design cannot be held ON during fault current condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 30a Box Dimensions: 4"H x 5"W x 5"L WT: 0.7 lbs UPC: 632085073657

Read more less