In-Line Fuel Overflow ProtectorThe fuel vent line surge protector helps avoid refueling spills because the surge-free line causes automatic fuel nozzles to shut off as the tank fills.With non-automatic nozzles, the surge protector causes a gurgling sound to indicate that the tank is full.Incorporates a ball-style check valve with internal baffling.Features: Meets ABYC Standard H-24 Install in-line with traditional tank vent systems that use standard 5/8" ID vent hose Compact size and operates in any orientation within 45° of vertical Withstands oil, gas, alcohol-blended fuels Includes 2 hose clamps for installation in the vent hose WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Universal Sprayless Connector - Male & FemaleSafely eliminate dangerous spraying of fuel when connecting or disconnecting pressurized hoses during fueling or maintenance. Comes complete with a thread-sealer for fast, easy installation; no additional supplies are required.Features: 8838HF6 Female Hose Fitting and 8838TM6 Male Threaded Tank Fitting Pre-applied fuel-grade thread sealant prevents fuel leaks Include check valves that automatically close upon disconnecting High fuel flow fitting (less than .25kPa restriction at 50 liters/hour) Compatible with Ethanol blended fuels High-strength body engineered to withstand tough marine environments Pre-applied fuel-grade thread sealant prevents leaks and saves you time Compatible with 3/8 inch fuel lines, Ethanol blended fuels, and all original equipment manufacturer (OEM) brand engines Can be used with portable generators and other portable fuel tanks *Meets all EPA and CARB (California Air Resources Board) requirements

Read more less

4" Fiberglass Exhaust Tubing ConnectorThe fiberglass connectors are corrosion-resistant high-temperature exhaust tubes designed specifically to minimize exhaust gas and cooling water flow restrictions on wet exhaust systems. Precise outside diameters facilitate perfect connections between sections of tubing and flexible elbows, bellows, or hoses. Meets UL94V-0 for flame retardancy.Specifications: Construction: Natural Fiberglass Resin: Class 1 Fire Retardant Epoxy Vinyl Ester Thermoset Glass: Corrosion Resistant E Glass Color: Amber Reinforcement: Filament Winding Temperature Range: Up to 350°F (177°C) Specifications: ID Diameter (inches): 4" Box Dimensions: 8"H x 8"W x 9"L WT: 1.05 lbs UPC: 704917000336 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (1-1/4" – 1-3/4") Clamping Range - 10-Pack - SAE Size 20Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 20 Hose Inner Diameter: (inch) 1" - 1-1/4"  Clamping Range: (inch) 1-1/4"– 1-3/4"/ (mm) 32-44 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

6" ID 90-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have molded reinforcing ribs on the outside.Features: Four stainless steel clamps are included This elbow has excellent resistance to ozone, salt water, diesel fumes and splashes, cold, heat, and aging Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards) Black high-temp EDPM rubber Construction: Color: Black Reinforcement: Reinforcing ribs on 6” I.D. and above Temperature Range: up to 250°F (121°C) Specifications: Inner Diameter: (inch) 6” / (mm) 152.4 A: (inch) 7" / (mm) 178 B: (inch) 7” / (mm) 178 C: (inch) 2.25” / (mm) 57 D: (inch) 2.25” / (mm) 57 R: (inch) 1.75” / (mm) 44.4 W: (inch) 0.25” / (mm) 6.4 Elbow Degree: 90 degrees Specifications: ID Diameter (inches): 6" Box Dimensions: 8"H x 10"W x 15"L WT: 4.4 lbs UPC: 704917000435 Quick Guide (pdf)

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 2.28"-2.59" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Inner Diameter (inch): 1-7/8" to 2" Hose Outer Diameter (inch): 2.28" to 2.59" Quick Guide (pdf)

Read more less

Outboard Fuel Filter for 3/8 inch LinesProtect your carbureted engine by trapping pollutants before they even reach the engine itself. High-flow, in-line fuel filters will work with most outboard motors.Features:  Use with 3/8 inch fuel lines Works with most outboard motors A clear body allows visual inspection, making it easier to stay on top of maintenance High-strength, impact-resistant, and shatter-resistant construction is ideal for  tough conditions Disposable for ultimate convenience *Best to replace during winterize or spring start-up for optimum results Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (1-3/4" – 2-1/4") Clamping Range - 10-Pack - SAE Size 28Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 28 Hose Inner Diameter: (inch) 1-1/2" - 1-5/8"  Clamping Range: (inch) 1-3/4"– 2-1/4" / (mm) 44-56 Recommended Torque Inch lbs: 45-60 Quick Guide (pdf)

Read more less

8" ID 45-Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident silicone-blend rubber marine wet exhaust connections. They are molded in very high-temperature blue silicone EPDM blended rubber with a smooth bore and cover; except elbows of 6" I.D. or larger have molded reinforcing ribs on the outside. Features: Four stainless steel t-bolt clamps Very high temp silicone/EDPM blend rubber - molded This elbow has excellent resistance to ozone, salt water, diesel fumes, splash, cold, heat, and aging Exceeds (SAE J2006-R1, and ABYC & NMMA P-1) exhaust standards  Blue very high-temperature silicone blended with EDPM rubber at 350°F (177°C) max continuous Construction: Color: Blue Reinforcement: Reinforcing ribs on 6” I.D. and above Temperature Range: up to 350°F (177°C) Specifications: Inner Diameter: (inch) 8” / 203.2 mm A: (inch) 2.25” / (mm) 5.7  B: (inch) 2.25” / (mm) 5.7  C: (inch) 8.5” / (mm) 21  R: (inch) 2.12” / (mm) 5.4  W: (inch) 0.37" / (mm) 9.4  Elbow Degree: 45 degrees  Specifications: ID Diameter (inches): 8" Box Dimensions: 8"H x 10"W x 15"L WT: 6.5 lbs UPC: 704917002354 Quick Guide (pdf)

Read more less

3/8" x 50' Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - GrayThis hose is built with the best fuel and age-resistant formulations and a unique "Barrier Liner" on the inside surface of the tube, so the fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year. Features:  Provides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone   Also, provides excellent rope-like bend-ability and fitting retention For both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%) EPA Certified and CARB Executive Order for low permeation Type B1-15 NMMA Type Accepted & CE certified Application: Marine Fuel Hose for distribution, return, vent and transfer For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel Construction: Tube: Fluoroplastic Internal Barrier Cover: Gray CPE Rubber Reinforcement: 2-Spiral Polyester Plies  Temperature Range: -20°F to 212°F (-28ºC to 100ºC) Length: 50’ (15m) Boxed Specifications: Inner Diameter: (inch) 3/8" / (mm) 9.50 Outer Diameter: (inch) 0.588 / (mm) 14.9 Burst Pressure: (psi) 175 / (mpa) 1.21 Working Pressure: (psi) 35 / (mpa) 0.24 Bend Radius: (inch) 4" / (mm) 101.6 Weight: (lb/100 ft.) 10.5 / (kg/m) 0.156 Permeation Rate (Standard is (15g/m^2/24hrs (CE10)): 5.0 *The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15 Specifications: ID Diameter (inches): 3/8" Length (Feet): 50' Box Dimensions: 3"H x 18"W x 18"L WT: 6.4 lbs UPC: 704917018065 Quick Guide (pdf)

Read more less

Star-Tron Enzyme Fuel System & Injector Cleaner & PEA Tech - 4 ozRemoves stubborn carbon deposits from fuel injectors, carburetors, valves, and rings. Designed for all engine types requiring fuel system cleaning and improved efficiency. The enzyme and PEA formula restores performance, reduces fuel consumption, and lowers emissions.Features: RESTORE ENGINE POWER - Removes performance-robbing deposits with a proprietary blend of enzymes and cleaners, ensuring smoother operation and increased efficiency MAXIMIZE FUEL ECONOMY - Cleans fuel system components to help reduce fuel consumption and save on gas costs, making it an essential addition to your maintenance routine ADVANCED PEA TECHNOLOGY - Uses Polyetheramine (PEA) technology to clean fuel injectors, carburetors, and intake valves, offering a superior clean that dissolves the toughest carbon deposits ENZYME REJUVANATION - The enzyme formula breathes new life into old, stale fuel, breaking down unwanted deposits and restoring combustion efficiency for smoother starts and operation EASY TO USE SOLUTION - Simply add to your fuel tank and let the engine run, a hassle-free way to maintain engine health and performance without professional help VERSATILE APPLICATION - Suitable for all engine types, including cars, trucks, and boats, ensuring peak performance across a wide range of vehicles LONG-LASTING EFFECTS - One treatment treats up to 40 gallons, offering a cost-effective solution for maintaining your engine’s performance over time RECOMMENDED MAINTENANCE - Use every 4 to 5 tanks or as needed, with Star Tron Enzyme Fuel Treatment at every fill-up for optimal results and continuous protection PEAK PERFORMANCE GUARANTEE - Designed to work with the latest engine technology, it keeps your engine running like new, minimizing the need for costly repairs and downtime Directions:Use 1 fl. oz. of Fuel System & Injector Cleaner for every 10 gallons of fuel being treated. Recommended treatment rate is every 4 to 5 tanks or as often as needed. Using the original Star Tron Enzyme Fuel Treatment at every fuel fill is also recommended to keep engines operating at peak performance levels.

Read more less

Star-Tron Enzyme Fuel Treatment - 32 ozEnsures easy starts and smooth running while curing and preventing ethanol fuel problems. Designed for all gas engines, including boats, cars, motorcycles, ATVs, and lawn equipment. The enzyme technology removes deposits, disperses water, and improves fuel economy while reducing emissions.Features: UNLEASH YOUR ENGINE'S FULL POTENTIAL - Star Tron Enzyme Fuel Treatment uses advanced enzyme technology to ensure all engines start easily and run smoothly, even after months of inactivity. SAY GOODBYE TO ETHANOL-RELATED PROBLEMS - Prevents and cures most ethanol-related issues, including poor performance, rough idling, and decreased fuel economy, giving you peace of mind on the road or on the water. MAXIMIZE FUEL ECONOMY - By removing and preventing gum, carbon deposits, and varnish build-up, Star Tron keeps your fuel delivery system clean, resulting in improved fuel economy. WORKS FOR ALL ENGINES AND FUEL TYPES - Whether you have a car, boat, RV, or lawn mower, Star Tron works in all engines and all fuels, making it the ideal fuel treatment and stabilizer for any vehicle. PREVENT WATER BUILD-UP - Helps prevent phase separation by dispersing water throughout fuel as submicron-sized droplets that are safely eliminated while the engine operates, keeping your engine running smoothly in humid or wet conditions. REVITALIZE OLD FUEL - Star Tron stabilizes fuel up to 2 years and can even help rejuvenate old, sub-spec fuel. REDUCE EMISSIONS & SAVE MONEY - Star Tron reduces smoke and emissions, which are a symptom of poor combustion, which wastes gas and is harmful to our health & planet. Try Star Tron Enzyme Fuel Treatment today and experience the difference. GET MORE BANG FOR YOUR BUCK with Star Tron! At just one fluid ounce per sixteen gallons of fuel, Star Tron Fuel Treatment Formula 930 is an incredibly cost-effective solution for optimizing engine performance and efficiency. #1 SELLING FUEL ADDITIVE: Star Tron is the top-selling and highest-rated gasoline treatment for the prevention of ethanol fuel problems, trusted by thousands of satisfied customers to enhance the performance of all types of engines. Directions:Always add Star Tron® just before each fuel fill up. Remove cap and pour the prescribed amount into tank. Overdosing is not harmful.

Read more less

Outboard Flushing System - 4 Outlet with Four 12' Hose KitsThe Flushmaster is a portable, marine-grade device designed to automate the flushing process for up to four outboard motors. Powered by (3) AA batteries, it ensures thorough engine cleaning by flushing each motor sequentially before automatically shutting off. With its IP67 waterproof certification, the Flushmaster is built to last, offering a convenient and time-saving solution for outboard maintenance. Select the perfect hose length for your setup and experience hassle-free engine care with just the push of a button.The Flushmaster Outboard Flushing System is a marine-grade, portable device that simplifies the process of flushing single, dual, triple, and even quad outboard motors. Powered by (3) AA batteries, the Flushmaster offers effortless engine maintenance while saving time and water. With just the push of a button, your motors are flushed one at a time, ensuring thorough cleaning and optimal engine performance. Once the flushing is complete, the device automatically shuts off and blocks the water flow, leaving you free to enjoy your day without further attention.Portable - Use it anywhere you have a freshwater supply: Water Spigot Garden Hose PVC Plumbing Choose the appropriate hose length based on your setup and application.With its IP67 Waterproof Certification, the Flushmaster is built to withstand harsh marine conditions, ensuring reliable performance season after season. Say goodbye to the hassle of traditional flushing methods and embrace the simplicity of Flushmaster for a smoother boating experience.What's Included? Flushmaster Device (3) AA Batteries Outlet Hoses Hose Clamps Screwdriver Instructions Manual and Warranty Product Installation: Install the included (3) AA batteries Install the outlet hose(s) to the Flushmaster device Connect the Flushmaster device to a water source Attach the outlet hose(s) to your boat motor(s) Press START to begin the automated flushing process Product Compatibility:The Flushmaster is compatible with four-stroke outboards and flush ports. Ensure you select the optimal hose length to accommodate your application.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Standard Carbon CanisterCarbon canister systems utilize an engineered charcoal canister to reduce hydrocarbons entering the atmosphere. Other components of a carbon canister system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood carbon canister systems are designed to ensure liquid fuel or water does not reach the canister and are compatible with Jerry Can and marine nozzle refueling.Features: Brackets OEM Installed Low permeation shell reduces overall system emissions Can be mounted in any orientation using brackets provided EPA / CARB Certified Fits a 5/8" vent hose Specifications:  Trailerable Vessel Capacity (EPA Rating): 220 Gallon Non-Trailerable Vessel Capacity (EPA Rating): 350 Gallon Trailerable Vessel Capacity (CARB Rating): 176 Gallon Non-Trailerable Vessel Capacity (CARB Rating): 350 Gallon  *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

1" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the FootTrident Flex wet exhaust hose for longer bent connections. In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.Features:  Sold by the foot Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius  Resists heat, ozone, exhaust, sani chemicals, panting, and collapse Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Specifications: Inner Diameter: (inch) 1" / (mm) 25.4 Outer Diameter: (inch) 1.57" / (mm) 25 Working Pressure: (Psi) 80 / (bar) 5.5 Bend Radius: (inch) 1.3" / (mm) 33 Weight: (Lb./50ft.) 30 / (Kg/m) 13.5 *Burst Pressure is 4 x Working PressureThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 1" Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 6"L WT: 0.49 lbs Quick Guide (pdf)

Read more less

Premium Replacement Outboard Starter for Yamaha 200-225HP - 13 ToothReplacement outboard starter that will fit Yamaha 200-225HP 4-stroke.ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces: HITACHI Outboard Starter S114-860N YAMAHA Outboard Starter 69J-81800-00 YAMAHA Outboard Starter 69J-81800-01 SIERRA Outboard Starter 18-6833 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Universal Fuel/Water Separator Kit with BracketKeep your engine running at peak efficiency by filtering out any water that may get into the fuel system. 10-micron filtering capability and fits all 2 and 4-cycle engines.Features: 10 Micron Filter and bracket included Outfitted with 2 brass plugs for secure connections and universal 3/8 inch (.85cm) ports Double seal for enhanced performance Replaces Mercury 35-60494A4 Quick Guide (pdf)

Read more less

CradleThe Flushmaster Cradle is the perfect solution for securely mounting and storing your Flushmaster Outboard Flushing Device. Made from durable, marine-grade starboard, it is designed to withstand harsh conditions and keep your device easily accessible. Keep your Flushmaster ready for action with this reliable storage solution.The Flushmaster Cradle is the ideal solution for securely mounting and storing your Flushmaster, keeping it easily accessible and ready for use. Engineered with durability in mind, this cradle is made from high-quality marine-grade starboard, ensuring it can withstand the harshest conditions on the water.Designed for boaters who want quick, easy access to their Flushmaster, the cradle is perfect for mounting on the end of a dock and using a garden hose for fast connections. The Flushmaster Cradle allows you to store your device between uses while minimizing clutter and maximizing boat or dock space.Features: Marine-Grade Durability: Made from robust starboard material, the Flushmaster Cradle is built to withstand tough marine environments and ensure lasting strength. Optimized Mounting: Designed for quick and secure attachment to pilings or docks, making your Flushmaster easily accessible at all times. Streamlined Storage: Safely store your Flushmaster between uses, keeping it out of the way and reducing clutter while preserving precious deck space. The perfect companion for your Flushmaster, the Flushmaster Cradle elevates your outboard flushing experience. Keep your Flushmaster protected and ready—order yours today!Specifications: Dimensions: 7.5" height, 7" width, 4.5" depth Fits any Flushmaster device What's Included? Cradle 3 screws WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Honda 3/8" Barb Female Hose Fitting - Engine EndThis Attwood Engine-End Hose Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The barb fitting fits 3/8" I.D. (Inner Diameter) hose. Clamps are not included and use thread sealant on all threads.Features: Honda fitting  Engine-End fitting Material Construction: Acetal  Rectangle locking post Quick Guide (pdf)

Read more less

Zeus A8000-48V 8kW 3.15 Alternator with Isolated Ground (Common Rail)The ARCO Zeus A8000-48V alternator turns on at lower RPMs, runs cooler, and provides more power than other 48V alternators that are larger and heavier. This alternator continuously generates over 3kW (55 Amps) at 2,500 RPM and almost 6kW (111 Amps) at 4,000 Alternator RPM. Put in real-world terms, a marine diesel engine charging at 1,200 RPM with a 3.13:1 pulley ratio is generating just over 5kW (97 Amps), and a Mercedes Sprinter at 750 RPM with a 3.21:1 ratio is generating over 3kW (55 Amps)!Instead of using rotors designed for 48 volts, many competitor alternators simply use their 12V rotors which is less efficient and limits output at all RPMs. In this scenario, your external smart regulator must drastically reduce field, by as much as 78%. If this is not done correctly, you run the risk of destroying the unit and damaging other components in your system. ARCO utilizes a native 48V rotor and field current. This results in our 48V alternator running cooler than competitor’s 48V alternators, having a direct impact on the alternator’s lifespan.Features: Engineered for high energy production. Suitable for marine, RV, military, and commercial applications. Rapidly charges large battery banks. Coolest operating temperatures for increased performance: Heat shedding coatings Rectifier located on housing exterior Dual cooling fans OEM components Optimized for performance at idle speeds. Reduces the need for a generator by creating additional power with your engine. Unleash peak performance with E-Coat/Cerakote, keeping the high amp alternator cooler for sustained amperage output. Use the ARCO Zeus Bluetooth Alternator Regulator for maximum performance or lithium battery charging. SAE J1171 Certified. Proudly made in the U.S.A. Technical Specifications: Voltage - 48v Field Type - P Rotor Poles - 16 Stator Size - 138mm Frame Size - Large Weight - 15.89lbs/7.2kg Regulation - External Only Finish - (Black) E-coating Cut-In RPM - 1,920 Alternator RPM Maximum Alt RPM - 19,000 Battery Post - M8 Thread Post, Side Mount Standard Pulley - 49K6 (6-groove, 49mm) Pulley Mount - 17mm diameter shaft, 25mm long, threaded M17 x 1.5 Pulley Hardware - M17 x 1.5 x 24mm nut, w/ 18mm ID x 29mm OD washer (Included) Diodes - 6 positive, 6 negative, 80A Rated, Avalanche Max Output (Cold, 9,000 RPM) at 53.5v - 180 Amps - 9,360 Watts – 14.8 kW PTO Sustained Cruising Output (Hot, 6,000 RPM) at 53.5v - 138 Amps - 7,383 Watts – 10.5 kW PTO Sustained Idle Output (Hot, 2,500 RPM) at 53.5v - 78 Amps 4,173 Watts – 6kW PTO Max Continuous Operating Temperature - 100°C / 212°F Mounting Application:Must Be Used on Yanmar Common Rail Engines Introduced after 2013 (JH-CR, 3JH40, 4JH45, 4JH57, 4JH80, 4JH110). Quick Guide (pdf)Brochure (pdf)

Read more less

Zeus A275L J180 4" Alternator with Isolated Ground & Terminal BlockThe highest power output alternator in its size/class. Features: Engineered for high energy production. Suitable for marine, RV, military, and commercial applications. Rapidly charges large battery banks. Coolest operating temperatures for increased performance. Heat shedding coatings Rectifier located on housing exterior Dual cooling fans OEM components Optimized for performance at idle speeds. Reduces the need for a generator by creating additional power with your engine. Unleash peak performance with E-Coat/Cerakote, keeping the A275L cooler for sustained amperage output. Use the ARCO Zeus Bluetooth Alternator Regulator for maximum performance or lithium battery charging. SAE J1171 Certified. Models available with internal/external voltage regulator. Proudly made in the U.S.A. Technical Specifications: Voltage - 12v Field Type - P Rotor Poles - 16 Stator Size - 138mm Frame Size - Large Weight - 14.9 lbs/6.7 kg Regulation - Internal/External (Internally regulated with adaptor for optional external regulation.) Output Voltage - 14.1v (Default) Finish - (Black) Cerakote or E-coating Cut-In RPM - 1,061 Alternator RPM Maximum Alt RPM - 19,000 Battery Post - M8 Thread Post, Side Mount Standard Pulley - 49K6 (6-groove, 49mm) Pulley Mount - 17mm diameter shaft, 25mm long, threaded M17 x 1.5 Pulley Hardware - M17 x 1.5 x 24mm nut, w/ 18mm ID x 29mm OD washer (Included) Diodes - 6 positive, 6 negative, 50A Rated, Avalanche Max Output (Cold, 9,000 RPM) - 311 Amps Sustained Cruising Output (Hot, 6,000 RPM) - 227 Amps Sustained Idle Output (Hot, 3,000 RPM) - 198 Amps Max Continuous Operating Temperature - 110°C / 230°F Mounting Applications:Replaces most Volvo Penta alternators using a 4” J180 saddle-style mount Quick Guide (pdf)Brochure (pdf)

Read more less

Original Equipment Quality Replacement Suzuki & OMC Outboard Starter - 2005-2018 ModelsReplacement outboard starter that will fit 9.9HP-20HP, 40HP-60HP 2005-2018.ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces: SUZUKI Outboard Starter 31100-94J22 SUZUKI Outboard Starter 31100-94J21 SUZUKI Outboard Starter 31100-94J20 SUZUKI Outboard Starter 31100-94J10 JOHNSON EVINRUDE Outboard Starter 5036244 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Premium Replacement Ignition Coil for Mercury Outboard Engines 2004-2018This ignition coil fits 2004-2018 (75,80,90,100,115,135,150,200,225,250,275,300,350 & 400HP) Mercury outboard engines.Replaces: MERCURY Ignition Coil 339-880615T01 SIERRA Ignition Coil 18-5154 CDI Electronics Ignition Coil 184-0002 *ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

In-Season Protection - 32ozFeatures: America’s #1 Ethanol Treatment Use STA-BIL 360 Protection at every fill-up Keeps fuel fresh for up to 12 months STA-BIL In-Season Protection Fuel System Treatment cleans the fuel system to increase power and fuel efficiency Prevents corrosion caused by moisture and today’s ethanol-blended fuels For all gasoline engines, including 2-cycle. Use in your vehicles, outdoor power equipment, motorcycles, and other small engine vehicles etc. Ultimate treatment and protection against Ethanol blended fuels, Non-Ethanol Fuels & condensation Made in the U.S.A. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Engine & Fuel Box Dimensions: 3"H x 5"W x 10"L WT: 2.1 lbs UPC: 073905222754

Read more less

Ignition Coil for Honda Outboard Engines BF75 (2007 & Up) & BF90 (2007 & Up)Ignition Coil for Honda Outboard engines: BF75 (2007 & Up) and BF90 (2007 & Up).Engine Brand:Honda OutboardFitment:Honda BF75 (2007 & Up), BF90 (2007 & Up) Brochure (pdf)

Read more less

Yamaha Fuel Line Kit 6' x 3/8"Attwood's low-permeation fuel line kits set the standard in performance, safety, and value. Along with featuring Attwood's award-winning Universal Sprayless Connector, these kits meet strict United States EPA regulations. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.Features: Includes Attwood's award-winning Universal Sprayless Connector; no more dangerous fuel sprays when connecting and disconnecting pressurized lines Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors Includes 3/8-inch low-permeation fuel hose that resists kinking and hardening; rated up to 100 degrees Centigrade Versatile: compatible with Ethanol blended fuels, Yamaha Brand engines and tanks Attwood products are both compatible and reliable, engineered and built with a never-fail attitude WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: ID Diameter (inches): 3/8" Length (Feet): 6' Box Dimensions: 3"H x 9"W x 14"L WT: 1.25 lbs UPC: 022697938640

Read more less

D-I-Y Boat Winterizer Engine Flushing SystemQuickly and efficiently service inboard/outboard marine engines. The Do-It-Yourself Winterizer allows flushing and preparation of boat engine for winter storage with just five gallons of antifreeze and your flusher. Save time and money season after season. Great for technicians, too. For front mounted raw water pump systems, use the Flush Adapter, sold separately.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Portable Fuel Tank - 6 Gallon without GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine. Features: 6 Gallon fuel capacity Compatible with 1/4" NPT fuel fittings Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve Cap with built-in vacuum valve means no need for manual venting Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 19.82" Width: (inch) 13.50" Height: (inch) 9.16" *No gauge or fuel line includedWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

1-1/2" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the FootTrident Flex wet exhaust hose for longer bent connections. In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.Features:  Sold by the foot Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Specifications: Inner Diameter: (inch) 1-1/2" / (mm) 38 Outer Diameter: (inch) 1.97 / (mm) .05 Working Pressure: (Psi) 60 / (bar) 4.1 Bend Radius: (inch) 4.0" / (mm) 102 Weight: (Lb./50ft.) 45 / (Kg/m) .518 *Burst Pressure is 4 x Working PressureThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 1-1/2" Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 6"L WT: 0.9 lbs Quick Guide (pdf)

Read more less

Fuel Stabilizer - 32oz Storing fuel for more than a year? Have a generator or piece of equipment you don't know the next time you will use it? Have no worries - STA-BIL Storage is an additive meant just for what you're looking for. STA-BIL Storage keeps gas fresh for up to 24 months. This eliminates the need to drain fuel before storing your equipment and ensures quick easy starts the next time you go to fire it up. This product is highly effective in all gasoline, including ethanol and non-ethanol blended fuels. Whether using 87, 91, or 93 octane gas ethanol or non-ethanol blended gas still goes bad. This product is great for bulk gas storage, as well as collector cars, small engines, generators, and boats. The treatment rate is 1oz to 2-1/2 gallons of gas. If using with small engine equipment it is best to add STA-BIL Storage to your gas can. This way every piece of equipment you fill with that can is treated. Make sure to add STA-BIL while the gas is fresh. The best practice is to add STA-BIL when you are at the pump.Features: America's #1 Fuel Stabilizer Treatment Keeps Fuel Fresh For Long Term Storage - Up To 24 Months Eliminates The Need To Drain Fuel Prior To Storage Ensures Quick, Easy Starts After Storage By Preventing Gum and Varnish Build Up Effective In All Gasoline, Including Ethanol and Non-Ethanol For Use In All Gasoline Engines, Including 2-Cycle - Use In Your Vehicles, Motorcycles, Small Engines, Boats, and Generators Made in the U. S. A. Specifications: Type: Engine & Fuel Box Dimensions: 3"H x 4"W x 10"L WT: 1.9 lbs UPC: 073905222143

Read more less

Zeus A225S 3.15 Alternator with Isolated Ground & Terminal BlockThe highest power output alternator in its size/class. Features: Engineered for high energy production. Suitable for marine, RV, military, and commercial applications. Rapidly charges large battery banks. Coolest operating temperatures for increased performance, running 8-20% cooler than incumbent alternators due to: Heat shedding coatings Rectifier located on housing exterior Dual cooling fans OEM components Optimized for performance at idle speeds. Reduces the need for a generator by creating additional power with your engine. Unleash peak performance with E-Coat/Cerakote. Our advanced coating absorbs less heat, keeping the A225S cooler for sustained amperage output. Use the ARCO Zeus Bluetooth Alternator Regulator for maximum performance or lithium battery charging. SAE J1171 Certified. Models are available with an internal/external voltage regulator. Proudly made in the U.S.A. Technical Specifications: Voltage - 12v Field Type - P Rotor Poles - 16 Stator Size - 130mm Frame Size - Small Weight - 12 lbs/5.4 kg Regulation - Internal/External (Internally regulated with adaptor for optional external regulation.) Output Voltage - 14.1v (Default) Finish - (Black) Cerakote or E-coating Cut-In RPM - 1,061 Alternator RPM Maximum Alt RPM - 19,000 Battery Post - M8 Thread Post, Side Mount Standard Pulley - 49K6 (6-groove, 49mm) Pulley Mount - 17mm diameter shaft, 25mm long, threaded M17 x 1.5 Pulley Hardware - M17 x 1.5 x 24mm nut, w/ 18mm ID x 29mm OD washer (Included) Diodes - 6 positive, 6 negative, 50A Rated, Avalanche Max Output (Cold, 9,000 RPM) - 254 Amps Sustained Cruising Output (Hot, 6,000 RPM) - 187 Amps Sustained Idle Output (Hot, 3,000 RPM) - 157 Amps Max Continuous Operating Temperature - 110°C / 230°F Mounting Application:Replaces most small case styles using a 3.15" saddle style mount (e.g., Hitachi, Lucas, Mitsubishi). Most Yanmars. Requires Standard single "V" belt upgrading to a Serpentine System Quick Guide (pdf)Brochure (pdf)

Read more less

1-1/4" Engine Flush Kit & AdaptorThe ConceptA simple quarter-turn quick-release plug can add safety and flexibility to any water system.  Add SSC to the top of any seacock to allow instant emergency bilge pumping, or to simplify winterization and cooling system flushing.In an EmergencyWhile the connected engine is running, close the seacock and remove the quick-release plug. Excess bilge water will be pumped overboard by the engine's raw water pump. Add GROCO BSA to pump out remote bilge locations.For WinterizationClose the seacock, remove the quick-release plug, and insert the service adaptor (included). Anti-freeze can be pumped into the cooling system.For System FlushingClose the seacock and insert the service adaptor. Dockside water can be used to flush the cooling system with the engine running at idle speed.Features:Bronze service adaptorSpecifications: Hose ID (in): 1-1/4" Thread NPT: 1-1/4" Overall Length: 4.55" *Add a GROCO Bilge Strainer to pump out remote bilge locations

Read more less

Premium Replacement Ignition Coil for Johnson/Evinrude Outboard Engines 1985-2006This ignition coil fits 1985-2006 (2.5-55HP – 2 Cyl.), 1995 (50HP – 3 Cyl.), 1995-2006 (80-115HP – 4 Cyl.), and 1991-2006 (105-175HP – 6 Cyl.) Johnson/Evinrude engines.Replaces: Johnson / Evinrude Ignition Coil 583740 Johnson / Evinrude Ignition Coil 583298 Johnson / Evinrude Ignition Coil 583040 Johnson / Evinrude Ignition Coil 777664 SIERRA Ignition Coil 18-5170 CDI Electronics Ignition Coil 183-3740 *ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Premium Replacement Alternator with 50mm Multi-Groove PulleyReplacement alternator that will fit Mercruiser 4.3L-6.2L, 12 Volt, 70 AMP, Internal Fan, 50-mm multi-groove serpentine pulley included.Features: All alternators are engineered for performance and reliability All alternators are engineered and manufactured with precision and quality All alternators must meet or exceed OEM performance before being boxed Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces:DELCO Alternator 19020611DELCO Alternator 19020612MERCURY Alternator 863077TPLEASURECRAFT Alternator RA097007SIERRA Alternator Alternator 18-6298PROTORQUE Alternator PH300-0035MPPARTS Alternator ADR0298This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 70A Voltage: 12v Box Dimensions: 8"H x 8"W x 9"L WT: 8.4 lbs UPC: 693006008264 Quick Guide (pdf)

Read more less

Replacement Outboard Tilt Trim Motor & Reservoir Only - Mercury/Mariner & Force MotorReplacement outboard tilt trim motor and reservoir that will fit late model Mercury /Mariner, Force 40-125 HP outboards w/single ram, 2-wire connection, 4-bolt mount, Hollow-hex shaft, (Motor/Reservoir Only) Includes stainless steel mounting screws, shaft adaptor, O-ring and fill plug. Bullet Connector Terminal Ends.ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces:MERCURY Tilt Trim Motor 19217A1MERCURY Tilt Trim Motor 19217A5MERCURY Tilt Trim Motor 809885A1MERCURY Tilt Trim Motor 809885A2MERCURY Tilt Trim Motor 809885T2MERCURY Tilt Trim Motor 811674MERCURY Tilt Trim Motor 813447MERCURY Tilt Trim Motor 818903A1MERCURY Tilt Trim Motor 819479A1MERCURY Tilt Trim Motor 8197480A1MERCURY Tilt Trim Motor 819762A4MERCURY Tilt Trim Motor 19762A5MERCURY Tilt Trim Motor 19762A6MERCURY Tilt Trim Motor 19762A7MERCURY Tilt Trim Motor 1977A8MERCURY Tilt Trim Motor 1977A9MERCURY Tilt Trim Motor 22870A1MERCURY Tilt Trim Motor 30250A3MERCURY Tilt Trim Motor 30250T3MERCURY Tilt Trim Motor 2021A1MERCURY Tilt Trim Motor 32021T1MERCURY Tilt Trim Motor 32021A2MERCURY Tilt Trim Motor 32021T2MERCURY Tilt Trim Motor 55654A1MERCURY Tilt Trim Motor 55654T2MERCURY Tilt Trim Motor 893907A02SIERRA Tilt Trim Motor 18-6777This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Zeus Alternator Shield - 12VProtect Your Alternator from Voltage Spikes & Disconnect EventsThe ARCO Zeus Alternator Shield is engineered to protect high-output alternators from damaging voltage spikes caused by sudden battery disconnect events. These events, commonly triggered by lithium battery BMS shutdowns or accidental switch interruptions, can instantly destroy alternator diodes. The Shield clamps excess voltage and safely diverts it to ground, helping extend alternator life and prevent costly failures.Key Benefits: Protects Against Voltage Spikes - Prevents damage caused by battery disconnects and load dump events Designed for Modern Electrical Systems - Ideal for lithium battery systems with BMS shutoff risk Extends Alternator Life - Reduces stress on diodes and internal components Real-Time Status Indication - LED indicator provides instant health status Easy Installation - Installs directly at alternator terminals in minutes Built for High Output Systems - Engineered to perform with today’s high-amperage alternators ARCO Advantage: Tested to ISO 16750-2 Load Dump Standard Up to 75% more survivable disconnect events vs. the leading competitor Designed to handle real-world high-output charging conditions Integrated into the ARCO Zeus ecosystem

Read more less

Zeus Alternator Shield - 24VProtect Your Alternator from Voltage Spikes & Disconnect EventsThe ARCO Zeus Alternator Shield is engineered to protect high-output alternators from damaging voltage spikes caused by sudden battery disconnect events. These events, commonly triggered by lithium battery BMS shutdowns or accidental switch interruptions, can instantly destroy alternator diodes. The Shield clamps excess voltage and safely diverts it to ground, helping extend alternator life and prevent costly failures.Key Benefits: Protects Against Voltage Spikes - Prevents damage caused by battery disconnects and load dump events Designed for Modern Electrical Systems - Ideal for lithium battery systems with BMS shutoff risk Extends Alternator Life - Reduces stress on diodes and internal components Real-Time Status Indication - LED indicator provides instant health status Easy Installation - Installs directly at alternator terminals in minutes Built for High Output Systems - Engineered to perform with today’s high-amperage alternators ARCO Advantage: Tested to ISO 16750-2 Load Dump Standard Up to 75% more survivable disconnect events vs. the leading competitor Designed to handle real-world high-output charging conditions Integrated into the ARCO Zeus ecosystem

Read more less

Zeus Alternator Shield - 48VProtect Your Alternator from Voltage Spikes & Disconnect EventsThe ARCO Zeus Alternator Shield is engineered to protect high-output alternators from damaging voltage spikes caused by sudden battery disconnect events. These events, commonly triggered by lithium battery BMS shutdowns or accidental switch interruptions, can instantly destroy alternator diodes. The Shield clamps excess voltage and safely diverts it to ground, helping extend alternator life and prevent costly failures.Key Benefits: Protects Against Voltage Spikes - Prevents damage caused by battery disconnects and load dump events Designed for Modern Electrical Systems - Ideal for lithium battery systems with BMS shutoff risk Extends Alternator Life - Reduces stress on diodes and internal components Real-Time Status Indication - LED indicator provides instant health status Easy Installation - Installs directly at alternator terminals in minutes Built for High Output Systems - Engineered to perform with today’s high-amperage alternators ARCO Advantage: Tested to ISO 16750-2 Load Dump Standard Up to 75% more survivable disconnect events vs. the leading competitor Designed to handle real-world high-output charging conditions Integrated into the ARCO Zeus ecosystem

Read more less

Gas Tank Strap - Nylon Webbing/304 Stainless Steel - 72"This Gas Tank Strap is for use in securing a portable gas tank. Includes: 1” x 6’ webbing strap with buckle, two footman's loops, and four #10 FH fasteners. Constructed of nylon webbing with corrosion-resistant 304 stainless steel hardware.Specifications:Fastener: #10 FH Specifications: Type: Parts Box Dimensions: 3"H x 4"W x 7"L WT: 0.35 lbs UPC: 035514359030

Read more less

Premium Replacement Ignition Coil for Mercury Outboard Engines 2005-PresentThis ignition coil fits 2005- UP (110 Jet, 135, 150, 175, 200, 225 & 250HP) DFI Outboard 1100,1350 and 1650QC4V Race Sterndrives.Replaces: MERCURY Ignition Coil 300-8M0077471 MERCURY Ignition Coil 339-879984A1 MERCURY Ignition Coil 339-879984T00 SIERRA Ignition Coil 18-5159 CDI ELECTRONICS Ignition Coil 184-0003 *ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Johnson/Evinrude Outboard Relay - 12V 30AJohnson/Evinrude outboard relay that will fit BRP-OMC.Replaces: BRP-OMC 582195  BRP-OMC 582472  BRP-OMC 582473  BRP-OMC 584416  BRP-OMC 586147  BRP-OMC 586244  BRP-OMC 3857533  BRP-OMC 586224  SIERRA 18-5705 *ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Parts Box Dimensions: 1"H x 3"W x 3"L WT: 0.25 lbs UPC: 693006002514

Read more less

Flush Port Quick Connect for Suzuki - WhiteMade for Suzuki outboards, the Flush Port Quick Connect for Suzuki Outboards removes the frustration of cross-threading and stripped ports — delivering fast, secure, and reliable flushing for better engine protection every time.Features: No more cross-threading Permanent, leak-free upgrade to factory flush ports Marine-grade durability for saltwater use Fast, effortless flushing with secure connection Simple installation – ready in minutes Hassle Free and Saves Time 30-Day Guarantee, 1-Year Warranty Specifications: Materials: Marine-grade construction with 316 stainless steel Installation: Replaces OEM flush port with a permanent, secured connection Corrosion Protection: Built for saltwater and harsh environments Application: Works with the Flushmaster system or a direct hose connection What's In The Box? (1) Suzuki Male Quick Connect (1) Female Hose Quick Connect (Black) (1) Wrench for tightening Suzuki Installation: Remove the Suzuki OEM plug cap from the engine cowling. Install the Flush Port Quick Connect to the engine cowling by threading the part on until tight.  Install the provided female Quick Connect to your water hose. For further leverage, if necessary, apply the provided tool to the male quick connect collar. DO NOT over-tighten. Your outboard engine is now ready to be operated or flushed.To flush, remove the secured cap by pushing in and turning counter clockwise to release and expose the male quick connector. Attach your Flushmaster hose or water source to the included female Quick Connect. Connect the female Quick Connect to the flush port. Reinstall the cap after finishing flushing.

Read more less

Mercury/Mariner Outboard Relay with Shroud & GrommetMercury/Mariner outboard relay that will fit Mercury & Mariner Outboards. 12 Volt, 30 AmpReplaces:Mercury Marine 828151Mercury Marine 828151A1Mercury Marine 882751A1*ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Parts Box Dimensions: 1"H x 1"W x 3"L WT: 0.3 lbs UPC: 693006009575

Read more less

Mercury/Yamaha Female Hose Engine Fitting - 3/8" BarbConnect your tank and fuel lines with confidence; the solid machined-brass construction holds up to leaded, unleaded, and alcohol-based fuels for.Features: Solid machined brass for dependable performance, peace of mind Hose female  Tank or Engine End Replaces Yamaha 6Y1-24305-03 *Specifically mates to Attwood part number: 8897-6 Quick Guide (pdf)

Read more less

Yanmar Pulley Kit for 4JH, 4JHE, -TE, -HTE, -DTEAltMount® Serpentine Pulley Conversion Kit for Yanmar Diesel EnginesYanmar Engines Covered: 4JH, 4JHE, -TE, -HTE, -DTEKit Includes:  Three Ten-Groove (J10) Pulleys Two J10 47″ Circumference Serpentine Belts (one spare) Mounting Hardware Note: If you specify an AT-200A Alternator, a longer belt length may be required.  Call Balmar Technical Support @ +1 (360) 435-6100 x3This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Original Equipment Quality Replacement Suzuki Outboard Starter - 2017-UpReplacement outboard starter that will fit Suzuki 70HP-100HP, 150-350HP 2017-2023.ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces: SUZUKI Outboard Starter 31100-98L10 SUZUKI Outboard Starter 31100-98L00 SIERRA Outboard Starter 18-6962 MITSUBISHI Outboard Starter M000TD5872 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Inboard Starter with 12-3/4" Flywheel & Gear ReductionThe inboard starter that will fit Mercruiser, Volvo Penta, OMC, Yamaha, and others. 12-3/4" flywheel. Clockwise Rotation. Will replace all CW rotating 10MT starters with one long and one short bolt straight across the pattern. Includes mounting bolts and gasket. Anodized casting, nickel-plated brush holder.ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registrationReplaces:BRP/ OMC Inboard Starter 381781BRP/ OMC Inboard Starter 384198BRP/ OMC Inboard Starter 981074BRP/ OMC Inboard Starter 981078BRP/ OMC Inboard Starter 982107BRP/ OMC Inboard Starter 982121BRP/ OMC Inboard Starter 982200BRP/ OMC Inboard Starter 983248BRP/ OMC Inboard Starter 983444BRP/ OMC Inboard Starter 983790BRP/ OMC Inboard Starter 985966BRP/ OMC Inboard Starter 988217BRP/ OMC Inboard Starter 3850526BRP/ OMC Inboard Starter 3854750BRP/ OMC Inboard Starter 3855882BRP/ OMC Inboard Starter 3858463DELCO Inboard Starter 9000763DELCO Inboard Starter 9000820DELCO Inboard Starter 9000822MARINE POWER Inboard Starter 0172-000MERCURY Inboard Starter 50-32703MERCURY Inboard Starter 50-45120MERCURY Inboard Starter 50-46282MERCURY Inboard Starter 50-59799MERCURY Inboard Starter 50-69863A1MERCURY Inboard Starter 50-69864A1MERCURY Inboard Starter 50-77328A1MERCURY Inboard Starter 50-77328A3MERCURY Inboard Starter 50-79821A2MERCURY Inboard Starter 50-79822A1MERCURY Inboard Starter 50-79822A2MERCURY Inboard Starter 50-79823A1MERCURY Inboard Starter 50-806963A2MERCURY Inboard Starter 50-806963A4MERCURY Inboard Starter 50-806965A2MERCURY Inboard Starter 50-806965A4MERCURY Inboard Starter 50-812429A2MERCURY Inboard Starter 50-99417A2PLEASURECRAFT Inboard Starter RA122016VOLVO Inboard Starter 3862308VOLVO Inboard Starter 3854750-1VOLVO Inboard Starter 3856003-3VOLVO Inboard Starter 855326-5SIERRA Inboard Starter 18-5900SIERRA Inboard Starter 18-5911SIERRA Inboard Starter 18-5919This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Replacement Outboard Tilt Trim Motor - Yamaha-4 BoltReplacement outboard tilt trim motor that will fit Yamaha 1997-UP 115 HP. 2000-UP 115 HP 4-Stroke. 1997-2000 130 HP, 1997-UP 150-200 HP, 1998-UP 225 HP. 2-wire connection, bolt mount, ring Terminal Ends, includes O-ring.ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces:YAMAHA Tilt Trim Motor 64E-43880-00YAMAHA Tilt Trim Motor 64E-43880-01YAMAHA Tilt Trim Motor 64E-43880-03YAMAHA Tilt Trim Motor 64E-43880-04YAMAHA Tilt Trim Motor 67H-43880-00YAMAHA Tilt Trim Motor 67H-43880-01YAMAHA Tilt Trim Motor 67H-43880-02YAMAHA Tilt Trim Motor 67H-43880-03YAMAHA Tilt Trim Motor 67H-43880-04YAMAHA Tilt Trim Motor 67H-43880-10YAMAHA Tilt Trim Motor 68V-43880-00YAMAHA Tilt Trim Motor 68V-43880-01YAMAHA Tilt Trim Motor 68V-43880-02YAMAHA Tilt Trim Motor 68V-43880-03YAMAHA Tilt Trim Motor 68V-43880-04BRP - OMC Tilt Trim Motor 5036732SIERRA Tilt Trim Motor 18-6783This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less