-
JL Audio JL Audio StowAway 10in Sealed 2 Ohm Subwoofer
JL Audio PES110-TW1-4 Single 10TW1 StowAway™, Sealed, 4 ohmsModel: PES110-TW1-4 Finish: black texture with debossed logo on top; a protective mesh grille is included to protect the subwoofer Recommended amplifier power: 75—300 watts Nominal impedance: 2 ohms StowAway™ subwoofer systems are engineered to deliver amazing subwoofer performance in challenging environments and applications.Featuring a down-firing hard-shell design, StowAway subwoofers are well suited for mounting areas shared with cargo or exposed to the elements. Constructed from marine-grade materials, this low-profile enclosure design harnesses the incredible small box requirements of the TW1 subwoofer to generate smooth and powerful bass from a remarkably compact enclosure. Slotted mounting feet located at each corner of the enclosure’s base assist with "off-the-floor" installations or in tight spaces where access is limited.The StowAway subwoofer system is prewired with selectable harness exits located underneath at opposite ends.Note: Mounting hardware is not included with StowAway systems. The installation method and mounting hardware used will vary based on the requirements of your specific application. The final mounting method must affix the enclosure securely to prevent movement and vibration.Specifications General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 4 Ohms Enclosure Type Sealed Finish Black Texture Grille Included Yes Physical Specifications Height (H) 7.0 in / 178 mm Width (W) 18.0 in / 457 mm Depth (D) 12.5 in / 318 mm What's in the Box:PES110-TW1-2 Single 10TW1 StowAway
$799.99
-
JL Audio JL Audio StowAway 10in Sealed 2 Ohm Subwoofer
JL Audio PES110-TW1-2 Single 10TW1 StowAway™, Sealed, 2 ohmsModel: PES110-TW1-2 Finish: black texture with debossed logo on top; a protective mesh grille is included to protect the subwoofer Recommended amplifier power: 75—300 watts Nominal impedance: 2 ohms StowAway™ subwoofer systems are engineered to deliver amazing subwoofer performance in challenging environments and applications.Featuring a down-firing hard-shell design, StowAway subwoofers are well suited for mounting areas shared with cargo or exposed to the elements. Constructed from marine-grade materials, this low-profile enclosure design harnesses the incredible small box requirements of the TW1 subwoofer to generate smooth and powerful bass from a remarkably compact enclosure. Slotted mounting feet located at each corner of the enclosure’s base assist with "off-the-floor" installations or in tight spaces where access is limited.The StowAway subwoofer system is prewired with selectable harness exits located underneath at opposite ends.Note: Mounting hardware is not included with StowAway systems. The installation method and mounting hardware used will vary based on the requirements of your specific application. The final mounting method must affix the enclosure securely to prevent movement and vibration.Specifications General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 2 Ohms Enclosure Type Sealed Finish Black Texture Grille Included Yes Physical Specifications Height (H) 7.0 in / 178 mm Width (W) 18.0 in / 457 mm Depth (D) 12.5 in / 318 mm What's in the Box:PES110-TW1-2 Single 10TW1 StowAway
$799.99
-
JL Audio JL Audio XDM Marine Amplifier Monoblock Subwoofer Amplifier 1000 Watt 12v
JL Audio XDM1000/1 Monoblock, Class D, Car/Marine Subwoofer Amplifier, 1000 WModel: XDM1000/1This monoblock subwoofer powerhouse employs our high-speed NexD™ switching technology to achieve unprecedented efficiency and amazing power output from a very compact chassis. The XDM1000/1 generates up to 1000 W of continuous power into a 2 ohm load (14.4V, 1% THD), making it a great choice to drive higher power subwoofer systems.Designed for car or boat installations, the XDM1000/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.Intended specifically for subwoofer applications, the XDM1000/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz and a defeatable infrasonic filter (30 Hz, 24 dB/oct.). With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captain’s chair.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 Ohms 600 W RMS x 1 @ 3 Ohms 800 W RMS x 1 @ 2 Ohms 1000 W RMS x 1 @ 1.5 Ohms N/A Rated Continuous (RMS) Power @ 12.5 V @ 4 Ohms 500 W RMS x 1 @ 3 Ohms 650 W RMS x 1 @ 2 Ohms 800 W RMS x 1 @ 1.5 Ohms N/A General Specifications Frequency Response 7 Hz - 500 Hz (+0, -1dB) S/N Ratio, referred to highest rated power >83 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >53 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ohms >1000 / 50 Hz Damping Factor @ 2 Ohms >500 / 50 Hz THD+N @ Rated Power <1% @ 2 Ohms per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 80 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass only Filter Slope(s) 12/24 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometer Yes Filter Defeat Function Yes Infrasonic Filter 30 Hz, defeatable Bass Boost EQ No Output Polarity Switch No Remote Subwoofer Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Bass EQ Boost Control No Pass-Through Preamp Output Buffered What's in the Box: XDM1000/1 Amp Wrench Documentation
$799.99
-
JL Audio JL Audio M6 8.8in Coaxial Speakers White Classic Grille
JL Audio M6 8.8in Coaxial Speakers White Classic Grille M6-880X-C-3Gw 93689Model: M6-880X-C-3GwM6 8.8-inch Marine Coaxial Speakers (125 W, 4 ohms) - Gloss White Trim Ring, Gloss White Classic Grille, White Tweeter MeshThe same principle that makes our 7.7-inch marine speakers dominate over conventional 6.5-inch designs is delivered in a more powerful dose in our M6-880X 8.8-inch coaxials.These 8.8-inch diameter monsters offer significant performance advantages over our 7.7 inch models, and a huge advantage over conventional 6.5 inch marine coaxials. Thanks to 36% more cone area and almost double the excursion capability, the M6-880X's are capable of +6 dB greater low frequency output than our M6-770X 7.7-inch coaxial systems! The bass is so impressive that the M6-880X can be used without a subwoofer while still packing a very serious low-frequency punch. Used with a subwoofer, they offer vastly better dynamics and mid-bass impact than smaller speakers, making them the best choice when ultimate performance is desired.To make sure that the high-frequencies sound just as good as the bass, our engineers have designed an oversized, 1.25-inch, silk dome tweeter for this model. This new tweeter plays louder, cleaner and extends lower in frequency to better mate with the 8.8-inch woofer. A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-880X Coaxial Systems can be used with as little as 50 W per channel, but for best audio performance we recommend amplifiers capable of between 50-250 W of continuous power per channel.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications 125 W Recommended Amplifier Power (RMS) Continuous Power Handling (RMS) 50 - 250 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 38 Hz - 20 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 8.80 in / 224 mm Bolt Hole Circle Diameter 7.97 in / 202 mm Frontal Grille Protrusion 1.37 in / 35 mm Mounting Hole Diameter 7.375 in / 187 mm Mounting Depth 5.00 in / 127 mm
$799.99
-
JL Audio JL Audio M6 8.8in Coaxial Speakers White Sport Grille
JL Audio M6 8.8in Coaxial Speakers White Sport Grille M6-880X-S-GwGw 93609Model: M6-880X-S-GwGwM6 8.8-inch Marine Coaxial Speakers (125 W, 4 ohms) - Gloss White Trim Ring, Gloss White Sport GrilleThe same principle that makes our 7.7-inch marine speakers dominate over conventional 6.5-inch designs is delivered in a more powerful dose in our M6-880X 8.8-inch coaxials.These 8.8-inch diameter monsters offer significant performance advantages over our 7.7 inch models, and a huge advantage over conventional 6.5 inch marine coaxials. Thanks to 36% more cone area and almost double the excursion capability, the M6-880X's are capable of +6 dB greater low frequency output than our M6-770X 7.7-inch coaxial systems! The bass is so impressive that the M6-880X can be used without a subwoofer while still packing a very serious low-frequency punch. Used with a subwoofer, they offer vastly better dynamics and mid-bass impact than smaller speakers, making them the best choice when ultimate performance is desired.To make sure that the high-frequencies sound just as good as the bass, our engineers have designed an oversized, 1.25-inch, silk dome tweeter for this model. This new tweeter plays louder, cleaner and extends lower in frequency to better mate with the 8.8-inch woofer. A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-880X Coaxial Systems can be used with as little as 50 W per channel, but for best audio performance we recommend amplifiers capable of between 50-250 W of continuous power per channel.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 125 W Recommended Amplifier Power (RMS) 50 - 250 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 38 Hz - 20 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 8.80 in / 224 mm Bolt Hole Circle Diameter 7.97 in / 202 mm Frontal Grille Protrusion 1.45 in / 37 mm Mounting Hole Diameter 7.375 in / 187 mm Mounting Depth 5.00 in / 127 mm
$799.99
-
JL Audio JL Audio XDM Marine Amplifier 6-Channel Full-Range 600 Watt 12v
JL Audio XDM600/6 6 Ch. Class D, Full-Range Car/Marine Amplifier, 600 WModel: XDM600/6The incredibly flexible XDM600/6 packs a serious full-range wallop and delivers a stunning 100 watts to each of its six channels into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.Suitable for car or boat installations, the XDM600/6 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.With the XDM600/6, you have plenty of great use options. Configure it as a six-channel satellite amplifier with 75 W x 6 @ 4 Ohm, or bridge four of its channels to create a staggered power four-channel amplifier with 200 W x 2 @ 4 Ohm for your front satellites and 75 W x 2 @ 4 Ohm for your rear satellites. You can also drive two subwoofers with 200 W each, plus a pair of satellites with 75W x 2.The XDM600/6 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of two, four, or all six amplifier channels directly from the driver's seat or cockpit.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.Specifications @ 4 Ohms 75 W RMS x 6 @ 2 Ohms 100 W RMS x 6 Bridged @ 4 Ohms 200 W RMS x 3 Rated Continuous (RMS) Power @ 12.5 V @ 4 Ohms 60 W RMS x 6 @ 2 Ohms 90 W RMS x 6 Bridged @ 4 Ohms 180 W RMS x 3 General Specifications Frequency Response 12 Hz - 22 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ohms >150 / 50 Hz Damping Factor @ 2 Ohms >75 / 50 Hz THD+N @ Rated Power <1% @ 2 Ohms per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuse™) Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Remote Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Level Modes 2 or 4 or All Channels Channel Input Mode Switch Yes (2/4/6 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A Input Voltage Rated Continuous (RMS) Power @ 14.4 V
$799.99
-
JL Audio JL Audio M6 8.8in Coaxial Speakers White Classic Grille Black Tweeter
JL Audio M6 8.8in Coaxial Speakers White Classic Grille Black Tweeter M6-880X-C-GwGw 93608Model: M6-880X-C-GwGwM6 8.8-inch Marine Coaxial Speakers (125 W, 4 ohms) - Gloss White Trim Ring, Gloss White Classic Grille, Black Tweeter MeshThe same principle that makes our 7.7-inch marine speakers dominate over conventional 6.5-inch designs is delivered in a more powerful dose in our M6-880X 8.8-inch coaxials.These 8.8-inch diameter monsters offer significant performance advantages over our 7.7 inch models, and a huge advantage over conventional 6.5 inch marine coaxials. Thanks to 36% more cone area and almost double the excursion capability, the M6-880X's are capable of +6 dB greater low frequency output than our M6-770X 7.7-inch coaxial systems! The bass is so impressive that the M6-880X can be used without a subwoofer while still packing a very serious low-frequency punch. Used with a subwoofer, they offer vastly better dynamics and mid-bass impact than smaller speakers, making them the best choice when ultimate performance is desired.To make sure that the high-frequencies sound just as good as the bass, our engineers have designed an oversized, 1.25-inch, silk dome tweeter for this model. This new tweeter plays louder, cleaner and extends lower in frequency to better mate with the 8.8-inch woofer. A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-880X Coaxial Systems can be used with as little as 50 W per channel, but for best audio performance we recommend amplifiers capable of between 50-250 W of continuous power per channel.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 125 W Recommended Amplifier Power (RMS) 50 - 250 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 38 Hz - 20 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 8.80 in / 224 mm Bolt Hole Circle Diameter 7.97 in / 202 mm Frontal Grille Protrusion 1.37 in / 35 mm Mounting Hole Diameter 7.375 in / 187 mm Mounting Depth 5.00 in / 127 mm
$799.99
-
JL Audio JL Audio M6 VeX 6.5in Enclosed System White Sport Grille
JL Audio M6 6.5-inch (165 mm) Enclosed Coaxial System, Gloss White Enclosure, Gloss White Trim Ring, Gloss White Sport GrilleModel: M6-650VEX-Gw-S-GwGwA rotating clamp receiver is included with each VEX™ pod to mate with an appropriate fixture (sold separately) for mounting to a flat surface, roll-cage or tower structure, allowing precise aiming for optimum sound. Pipe mounting fixtures (sold separately) are available in a variety of sizes to fit a wide range of tube diameters.The enclosures feature a decorative, aluminum logo cap on the end opposite the speaker, which can be oriented to match any custom mounting application. For convenience, ten feet of our 16AWG marine-grade, parallel conductor speaker cable is included with each VEX™ pod.Although VEX™ pods can be used with as little as 25 W per channel, we recommend powering these systems with an amplifier capable of 75-150 W of continuous power per channel. For best results, use with a subwoofer.Like all JL Audio marine speakers, this system is weatherproof and built to deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Product is pictured with Pipe-Mounting Clamps (sold separately).Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 100 Hz - 25 KHz ± 3 dB What's in the Box: M9-650VEX x2 Lexan Logo Appliqu s x 2
$799.99
-
JL Audio JL Audio M6 7.7in Coaxial Speakers Titanium Sport Grille with RGB LED
JL Audio M6 7.7in Coaxial Speakers Titanium Sport Grille Speakers Titanium Sport Grille with RGB LEDModel: M6-770X-S-GmTi-iM6 7.7-inch Marine Coaxial Speakers with Transflective™ LED Lighting for Infinite-Baffle Use (100 W, 4 ohms) - Gray Metallic Trim Ring, Titanium Sport GrillePurpose-engineered and built for real marine duty, M6 coaxial systems deliver maximum audio performance in any open-air boating environment, with the added visual impact of JL Audio’s Transflective™ RGB LED lighting..The oversized 7.7-inch design of the M6-770X coaxial results in increased efficiency (more output for a given amount of power). Combine that advantage with long excursion and excellent power handling and you have a speaker system truly capable of playing loud and clear in a powerboat at speed. The woofer element is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 57 l). Operating this coaxial system in less space will compromise its low frequency performance.A 1-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-770X Coaxial Systems can be used with as little as 40 W per channel, for best audio performance we recommend amplifiers capable of between 40-200 W of continuous power per channel. The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 100 W Recommended Amplifier Power (RMS) 40 - 200 W / Ch. System Efficiency 91.0 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 45 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 7.70 in / 196 mm Bolt Hole Circle Diameter 6.92 in / 176 mm Frontal Grille Protrusion 1.08 in. / 27 mm Mounting Hole Diameter 6.25 in / 159 mm Mounting Depth 3.32 in. / 84 mm
$779.99
-
JL Audio JL Audio M6 7.7in Coaxial Speakers White Sport Grille with RGB LED
JL Audio M6 7.7in Coaxial Speakers White Sport Grille with RGB LEDModel: M6-770X-S-GwGw-iM6 7.7-inch Marine Coaxial Speakers with Transflective™ LED Lighting (100 W, 4 ohms) - Gloss White Trim Ring, Gloss White Sport GrillePurpose-engineered and built for real marine duty, M6 coaxial systems deliver maximum audio performance in any open-air boating environment, with the added visual impact of JL Audio’s Transflective™ RGB LED lighting.The oversized 7.7-inch design of the M6-770X coaxial results in increased efficiency (more output for a given amount of power). Combine that advantage with long excursion and excellent power handling and you have a speaker system truly capable of playing loud and clear in a powerboat at speed. The woofer element is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 57 l). Operating this coaxial system in less space will compromise its low frequency performance.A 1-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-770X Coaxial Systems can be used with as little as 40 W per channel, for best audio performance we recommend amplifiers capable of between 40-200 W of continuous power per channel. The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 100 W Recommended Amplifier Power (RMS) 40 - 200 W / Ch. System Efficiency 91.0 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 45 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 7.70 in / 196 mm Bolt Hole Circle Diameter 6.92 in / 176 mm Frontal Grille Protrusion 1.08 in. / 27 mm Mounting Hole Diameter 6.25 in / 159 mm Mounting Depth 3.32 in. / 84 mm
$749.99
-
JL Audio JL Audio M6 7.7in Coaxial Speakers Titanium Sport Grille
JL Audio M6 7.7in Coaxial Speakers Titanium Sport GrilleModel: M6-770X-S-GmTiM6 7.7-inch Marine Coaxial Speakers for Infinite-Baffle Use (100 W, 4 ohms) - Gray Metallic Trim Ring, Titanium Sport GrillePurpose-engineered and built for real marine duty, M6 coaxial systems deliver maximum audio performance in any open-air boating environment.The oversized 7.7-inch design of the M6-770X coaxial results in increased efficiency (more output for a given amount of power). Combine that advantage with long excursion and excellent power handling and you have a speaker system truly capable of playing loud and clear in a powerboat at speed.A 1-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-770X Coaxial Systems can be used with as little as 40 W per channel, for best audio performance we recommend amplifiers capable of between 40-200 W of continuous power per channel.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 100 W Recommended Amplifier Power (RMS) 40 - 200 W / Ch. System Efficiency 91.0 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 45 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 7.70 in / 196 mm Bolt Hole Circle Diameter 6.92 in / 176 mm Frontal Grille Protrusion 1.08 in. / 27 mm Mounting Hole Diameter 6.25 in / 159 mm Mounting Depth 3.32 in. / 84 mm
$729.99
-
JL Audio JL Audio MediaMaster 105 Weatherproof Source unit
JL Audio MM105 Weatherproof Source Unit with Full-Color LCD DisplayModel: MM105 Tough, weatherproof (IP67 rated) design and construction to withstand the elements Ultra-bright, easy-to-read, 3.5-inch (89 mm) full-color LCD display with individual settings for day/night lighting and display themes Oversized, illuminated control knob with large backlit buttons sealed behind a watertight membrane Intuitive interface with large text for easy legibility while in motion Independent user settings for display brightness, button brightness and remote controller brightness (optional) 12-channels of audiophile quality, 4V RMS preamp level outputs Available Digital HD Radio™ (North America) and DAB+ Radio (Europe) tuners for the best in broadcast sound quality and selection Global AM/FM radio tuner with RDS (Radio Data System), to display extended FM program info, where available SiriusXM-Ready™ (tuner, antenna and subscription sold separately) 24 Favorites: store up to 24 of your favorite channels for quick access, across all tuner bands, including Sirius/XM Bluetooth® audio streaming with Qualcomm® aptX™ for maximum audio fidelity with compatible devices USB1 and USB2 direct-digital connections access music files on your compatible iPhone® or USB storage device; includes 1A and 500mA charging outputs AUX1 and AUX2 inputs accepts analog audio signals from a variety of audio sources Certified NMEA 2000® Connectivity - MFD (Multi-Function Display) vessel control functionality using applicable network cables and connectors (sold separately). Weatherproof design (IP67 rated) for real marine duty Protective Sun Cover included Enjoy great audio wherever your adventures might take you, with the MediaMaster® 105, a Premium Source Unit designed to withstand anything Mother Nature can dish out. This full-featured source unit delivers top-flight sound performance and advanced audio features specifically designed for marine and powersports applications. Its rugged, weatherproof (IP67 rated) chassis houses an ultra-bright, 3.5-inch full-color LCD display, with separate Day/Night lighting themes for outstanding visibility, even in bright sunshine. When in motion, you will also appreciate the clean user interface with big text and large backlit controls.Because sound quality is our top priority, the MM105 is not equipped with an internal amplifier designed to drive loudspeakers directly. Instead, it offers twelve channels of audiophile-quality, preamp level outputs to deliver crystal-clear signals to high-quality marine amplifiers. These are deployed via four configurable, nameable audio zones, each with its own set of independent control options, making the MM105 adaptable to a wide range of system types. On-the-fly, level controls make adjusting each or all audio zones a breeze, while a useful volume limit feature ensures that nobody gets blasted inadvertently. All zones feature our Zero-Clipping audio circuit design, with self-limiting tone controls to keep the audio clean at high listening levels, reducing the likelihood of speaker damage.With certified NMEA-2000® connectivity, the MM105 is also an ideal partner to your Garmin, Lowrance, Raymarine or Simrad Multifunction Display! (MFD)Specifications General Specifications Input Operating Voltage 10 - 15.9 VDC Standby Current Draw 120 mA Operating Current Draw 1.5 A Recommended Fuse Value 5 A Remote Turn-on Capacity 500 mA (max) Operating Temperature Range -4 F to +158 F (-20 C to +70 C) Display Size / Type 3.5-inch / TFT LCD backlighted Display Resolution 320 x 480 Output Channels One stereo pair and mono subwoofer RCA plugs per zone Output Zones Relative, Absolute, Fixed or Off Maximum Output Voltage 4V RMS (Relative or Absolute), Selectable 4V/2V/1V RMS (Fixed) Tuner FM Tuner with RDS 87.5 MHz to 107.9 MHz (0.2 MHz step) AM Tuner 530 kHz to 1710 kHz (10 kHz step) DAB+ Tuner 170 MHz to 230 MHz Favorites 24 presets across all tuners Bluetooth® Profile A2DP v1.2, AVRCP v1.4 Core Specification Version 2.1 + EDR Codec SBC, Qualcomm® aptX™ audio Connection Range Up to 35 ft / 11 m USB Interface USB 2.0 host Maximum Current Output USB1: 1 A / USB2: 500 mA Supported Audio Formats MP3, MP4, WAV (up to 1411 kbps), AAC, M4A, M4B Apple Compatibility iPhone 5 or beyond (functionality contingent upon compatible iOS release) What's in the Box: MMC-105 Gasket Cover Harbess Screw x 4 Template
$699.99
-
JL Audio JL Audio M6 7.7in Coaxial Speakers White Classic Grille
JL Audio M6 7.7in Coaxial JL Audio M6 7.7in CoaxialModel: M6-770X-C-3GwM6 7.7-inch Marine Coaxial Speakers (100 W, 4 ohms) - Gloss White Trim Ring, Gloss White Classic Grille, White Tweeter MeshPurpose-engineered and built for real marine duty, M6 coaxial systems deliver maximum audio performance in any open-air boating environment.The oversized 7.7-inch design of the M6-770X coaxial results in increased efficiency (more output for a given amount of power). Combine that advantage with long excursion and excellent power handling and you have a speaker system truly capable of playing loud and clear in a powerboat at speed.A 1-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-770X Coaxial Systems can be used with as little as 40 W per channel, for best audio performance we recommend amplifiers capable of between 40-200 W of continuous power per channel.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 100 W Recommended Amplifier Power (RMS) 40 - 200 W / Ch. System Efficiency 91.0 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 45 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 7.70 in / 196 mm Bolt Hole Circle Diameter 6.92 in / 176 mm Frontal Grille Protrusion 1.03 in. / 26 mm Mounting Hole Diameter 6.25 in / 159 mm Mounting Depth 3.32 in. / 84 mm
$699.99
-
JL Audio JL Audio M6 7.7in Coaxial Speakers White Classic Grille Black Tweeter
JL Audio M6 7.7in Coaxial Speakers White Classic Grille Black TweeterModel: M6-770X-C-GwGwM6 7.7-inch Marine Coaxial Speakers (100 W, 4 ohms) - Gloss White Trim Ring, Gloss White Classic Grille, Black Tweeter MeshPurpose-engineered and built for real marine duty, M6 coaxial systems deliver maximum audio performance in any open-air boating environment.The oversized 7.7-inch design of the M6-770X coaxial results in increased efficiency (more output for a given amount of power). Combine that advantage with long excursion and excellent power handling and you have a speaker system truly capable of playing loud and clear in a powerboat at speed.A 1-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-770X Coaxial Systems can be used with as little as 40 W per channel, for best audio performance we recommend amplifiers capable of between 40-200 W of continuous power per channel.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 100 W Recommended Amplifier Power (RMS) 40 - 200 W / Ch. System Efficiency 91.0 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 45 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 7.70 in / 196 mm Bolt Hole Circle Diameter 6.92 in / 176 mm Frontal Grille Protrusion 1.03 in. / 26 mm Mounting Hole Diameter 6.25 in / 159 mm Mounting Depth 3.32 in. / 84 mm
$699.99
-
JL Audio JL Audio M6 7.7in Coaxial Speakers White Sport Grille
JL Audio M6 7.7in Coaxial Speakers White Sport GrilleModel: M6-770X-S-GwGwM6 7.7-inch Marine Coaxial Speakers (100 W, 4 ohms) - Gloss White Trim Ring, Gloss White Sport GrillePurpose-engineered and built for real marine duty, M6 coaxial systems deliver maximum audio performance in any open-air boating environment.The oversized 7.7-inch design of the M6-770X coaxial results in increased efficiency (more output for a given amount of power). Combine that advantage with long excursion and excellent power handling and you have a speaker system truly capable of playing loud and clear in a powerboat at speed.A 1-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-770X Coaxial Systems can be used with as little as 40 W per channel, for best audio performance we recommend amplifiers capable of between 40-200 W of continuous power per channel.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 100 W Recommended Amplifier Power (RMS) 40 - 200 W / Ch. System Efficiency 91.0 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 45 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 7.70 in / 196 mm Bolt Hole Circle Diameter 6.92 in / 176 mm Frontal Grille Protrusion 1.08 in. / 27 mm Mounting Hole Diameter 6.25 in / 159 mm Mounting Depth 3.32 in. / 84 mm
$699.99
-
JL Audio JL Audio M6 6.5in Coaxial Speakers Gray Sport Grille with RGB LED
JL Audio M6 6.5in Coaxial Speakers Gray Sport Grille with RGB LEDModel: M6-650X-S-GmTi-iM6 6.5-inch Marine Coaxial Speakers with Transflective™ LED Lighting (75 W, 4 OHMS) - Gray Metallic Trim Ring, Titanium Sport GrillePurpose-engineered and built for real marine duty, M6 coaxial systems deliver maximum audio performance in any open-air boating environment, with the added visual impact of JL Audio’s Transflective™ RGB LED lighting.A DMA-optimized, long excursion woofer design and excellent power handling ensures your music will come through loud and clear at speed, or at anchor.A 0.8-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-650-X Coaxial Systems can be used with as little as 25 W per channel, for best audio performance we recommend amplifiers capable of between 75-150 W of continuous power per channel. The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 55 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 6.90 in / 175 mm Bolt Hole Circle Diameter 6.13 in / 156 mm Frontal Grille Protrusion 0.94 in / 24 mm Mounting Depth 3.00 in. / 76 mm
$679.99
-
JL Audio JL Audio MediaMaster 105 Weatherproof Hidden Source Unit
Jl Audio MM105-HR Premium, Hidden Marine Source UnitModel: MM105-HR 12-channels of audiophile quality, 4V RMS preamp level outputs NMEA 2000® MFD Control - Use your compatible Multi-Function Display from Garmin, Simrad, Lowrance or Raymarine (refer to MFD manufacturer for compatibility info) MMR-40 NMEA 2000® Network Controller (sold separately) - Full-function, water-resistant (IP66 rated) controller with full-color LCD display Four separate audio zones, each with independent feature/control options: Available Digital HD Radio™ (North America) and DAB+ Radio (Europe) tuners for the best in broadcast sound quality and selection Global AM/FM radio tuner with RDS (Radio Data System), to display extended FM program info, where available SiriusXM-Ready™ (tuner, antenna and subscription sold separately) SiriusXM-Ready™ (tuner, antenna and subscription sold separately) Bluetooth® audio streaming with Qualcomm® aptX™ for maximum audio fidelity with compatible devices USB1 and USB2 direct-digital connections access music files on your compatible iPhone® or USB storage device; includes 1A and 500mA charging outputs AUX1 and AUX2 inputs accepts analog audio signals from a variety of audio sources Certified NMEA 2000® Connectivity - MFD (Multi-Function Display) vessel control functionality using applicable network cables and connectors (sold separately). Engineered to operate behind the scenes as a hideaway receiver, the MediaMaster® 105-HR includes all features of the MM105, minus the LCD display and physical controls. This full-featured, concealed source unit delivers top-flight sound performance and advanced audio features specifically designed for marine applications. Outfitted with NMEA-2000® connectivity, the MM105-HR can be controlled by your Garmin, Lowrance, Raymarine or Simrad Multi-Function Display (MFD) or MMR-40 NMEA 2000® Network Controller (sold separately).Because sound quality is our top priority, the MM105-HR is not equipped with an internal amplifier designed to drive loudspeakers directly. Instead, it offers twelve channels of audiophile-quality, preamp level outputs to deliver crystal-clear signals to high-quality marine amplifiers. These are deployed via four configurable, nameable audio zones, each with its own set of independent control options, making the MM105-HR adaptable to a wide range of system types. On-the-fly, level controls make adjusting each or all audio zones a breeze, while a useful volume limit feature ensures that nobody gets blasted inadvertently. All zones feature our Zero-Clipping audio circuit design, with self-limiting tone controls to keep the audio clean at high listening levels, reducing the likelihood of speaker damage.Specifications General Specifications Input Operating Voltage 10 - 15.9 VDC Standby Current Draw 120 mA Operating Current Draw 1.5 A Recommended Fuse Value 5 A Remote Turn-on Capacity 500 mA (max) Operating Temperature Range -4 F to +158 F (-20 C to +70 C) Output Channels One stereo pair and mono subwoofer RCA plugs per zone Output Zones Relative, Absolute, Fixed or Off Maximum Output Voltage 4V RMS (Relative or Absolute), Selectable 4V/2V/1V RMS (Fixed) Tuner FM Tuner with RDS 87.5 MHz to 107.9 MHz (0.2 MHz step) AM Tuner 530 kHz to 1710 kHz (10 kHz step) DAB+ Tuner 170 MHz to 230 MHz Favorites 24 presets across all tuners Bluetooth® Profile A2DP v1.2, AVRCP v1.4 Core Specification Version 2.1 + EDR Codec SBC, Qualcomm® aptX™ audio Connection Range Up to 35 ft / 11 m USB Interface USB 2.0 host Maximum Current Output USB1: 1 A / USB2: 500 mA Supported Audio Formats MP3, MP4, WAV, AAC, M4A, M4B Apple Compatibility iPhone 5 or beyond (functionality contingent upon compatible iOS release) What's in the Box: MM105-HR Black Box Powercord #8 x 1 in screw x 4
$649.99
-
JL Audio JL Audio XDM Marine Amplifier 3-Channel 500 Watt 12v
JL Audio XDM500/3 3 Ch. Class D, Car/Marine System Amplifier, 500 WModel: XDM500/3Small enough to fit in just about any tight space application, the XDM500/3 is the perfect amplifier for a simple audiophile-grade, subwoofer / satellite system. With its three channels of versatile output, you can drive a pair of quality component speaker systems with plenty of clean power, while also delivering a stout 300 W to your subwoofer system. The technology that makes this much power possible in such a small chassis is our advanced NexD™ switching amplifier design.Suitable for car or boat installations, the XDM500/3 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.The XDM500/3 includes a 12 dB / octave high-pass filter for its main channels, plus a variable slope low-pass filter for its subwoofer channel. Both filters offer continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the subwoofer channel directly from the driver's seat or helm.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.Specifications Rated Continuous (RMS) Power @ 14.4 V Main Channels @ 4 ohms 75 W RMS x 2 Main Channels @ 2 ohms 100 W RMS x 2 Main Channels - Bridged @ 4ohms 200 W RMS x 1 Subwoofer Channel @ 4 ohms 180 W RMS x 1 Subwoofer Channel @ 3 ohms 240 W RMS x 1 Subwoofer Channel @ 2 ohms 300 W RMS x 1 Subwoofer Channel @ 1.5 ohms N/A Rated Continuous (RMS) Power @ 12.5 V Main Channels @ 4 ohms 60 W RMS x 2 Main Channels @ 2 ohms 90 W RMS x 2 Main Channels - Bridged @ 4ohms 180 W RMS x 1 Subwoofer Channel @ 4 ohms 180 W RMS x 1 Subwoofer Channel @ 3 ohms 240 W RMS x 1 Subwoofer Channel @ 2 ohms 300 W RMS x 1 Subwoofer Channel @ 1.5 ohms N/A Frequency Response (Main Channels) 12 Hz - 22 kHz (+0, -1dB) Frequency Response (Subwoofer Channel) 10 Hz - 1 kHz (+0, -1dB) S/N Ratio, referred to highest rated power (Main Channels) >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >120 / 50 Hz Damping Factor @ 2 ohms >60 / 50 Hz THD+N @ Rated Power (Main Channels) <1% @ 2 ohms per Ch. THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 ohms per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Rating 50 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s): Channels 1 & 2 (front) High-Pass only Filter Slope(s): Channels 1 & 2 (front) 12 dB/octave Filter Frequency Range: Channels 1 & 2 (front) 50 Hz - 500 Hz Filter Mode(s): Channels 3 & 4 (rear) N/A Filter Slope(s): Channels 3 & 4 (rear) N/A Filter Frequency Range: Channels 3 & 4 N/A Filter Mode(s): Subwoofer Channel Low-Pass only Filter Slope(s): Subwoofer Channel 12/24 dB/octave Filter Frequency Range: Subwoofer Channel 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Infrasonic Filter: Subwoofer Channel none Remote Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Level Modes Sub Ch. or All Channels Channel Input Mode Switch Yes (2/4 ch.) Pass-Through Preamp Output Buffered Source Channel Selection for PreOuts Yes (1&2/Sum/Sub) Height 2.05 in / 52 mm Width (W) 8.52 in / 216 mm Depth (D) 7.09 in / 180 mm Net Weight 4.8 lb / 2.18 kg What's in the Box: XDM500/3 Amp Wrench Badge
$649.99
-
JL Audio JL Audio XDM Marine Amplifier 4-Channel Full-Range 400 Watt 12v
JL Audio XDM400/4 4 Ch. Class D, Full-Range Car/Marine Amplifier, 400 WModel: XDM400/4The ultra-compact XDM400/4 packs a serious full-range punch, generating a whopping 100 watts to each of its four channels into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.Suitable for car or boat installations, the XDM400/4 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.Combine the XDM400/4 with our XDM600/1 monoblock to build a stunning 1000 W amplification system to power four satellites and a subwoofer... and fit the whole thing under a seat or deck. Or, use the XDM400/4 by itself to power two satellites, plus a subwoofer.The XDM400/4 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the rear channels directly from the driver's seat or cockpit.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 Ohms 75 W RMS x 4 @ 2 Ohms 100 W RMS x 4 Bridged @ 4 Ohms 200 W RMS x 2 @ 4 Ohms 60 W RMS x 4 @ 2 Ohms 90 W RMS x 4 Bridged @ 4 Ohms 180 W RMS x 2 General Specifications Frequency Response 12 Hz - 22 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ohms >150 / 50 Hz Damping Factor @ 2 Ohms >75 / 50 Hz THD+N @ Rated Power <1% @ 2 Ohms per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 40 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Remote Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Level Modes 2 or All channels Channel Input Mode Switch Yes (2/4 ch.) Pass-Through Preamp Output Buffered Source Channel Selection for PreOuts Yes
$649.99
-
JL Audio JL Audio M6 6.5in Coaxial Speakers White Sport Grille with RGB LED
JL Audio M6 6.5in Coaxial Speakers White Sport Grille with RGB LEDModel: M6-650X-S-GwGw-iM6 6.5-inch Marine Coaxial Speakers with Transflective™ LED Lighting (75 W, 4 ohms) - Gloss White Trim Ring, Gloss White Sport Grille.A DMA-optimized, long excursion woofer design and excellent power handling ensures your music will come through loud and clear at speed, or at anchor.A 0.8-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-650-X Coaxial Systems can be used with as little as 25 W per channel, for best audio performance we recommend amplifiers capable of between 75-150 W of continuous power per channel. The patent-pending Transflective™ RGB LED technology emits a smooth lighting effect through the woofer cone, with a choice of several lighting colors. Add an optional RGB controller to create thousands of color variations.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 55 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 6.90 in / 175 mm Bolt Hole Circle Diameter 6.13 in / 156 mm Frontal Grille Protrusion 1.02 in. / 26 mm Mounting Hole Diameter 5.00 - 5.25 in / 127 - 133 mm Mounting Depth 3.00 in. / 76 mm
$649.99
-
JL Audio JL Audio M6 6.5in Coaxial Speakers Titanium Sport Grille
JL Audio M6 6.5in Coaxial Speakers Titanium Sport GrilleModel: M6-650X-S-GmTiM6 6.5-inch Marine Coaxial Speakers (75 W, 4 ohms) - Gray Metallic Trim Ring, Titanium Sport GrillePurpose-engineered and built for real marine duty, M6 coaxial systems deliver maximum audio performance in any open-air boating environment.A DMA-optimized, long excursion woofer design and excellent power handling ensures your music will come through loud and clear at speed, or at anchor.A 0.8-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-650-X Coaxial Systems can be used with as little as 25 W per channel, for best audio performance we recommend amplifiers capable of between 75-150 W of continuous power per channel.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materialsSold as a pair.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Nominal Impedance 55 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 6.90 in / 175 mm Bolt Hole Circle Diameter 6.13 in / 156 mm Frontal Grille Protrusion 0.94 in / 24 mm Mounting Hole Diameter 5.00 - 5.25 in / 127 - 133 mm Mounting Depth 3.00 in. / 76 mm
$629.99
-
JL Audio JL Audio M3 VeX 6.5in Enclosed System Gray Sport Grille With RGB LED
JL Audio M3 6.5-inch (165 mm) Enclosed Coaxial System with RGB LED Lighting, Matte Black Enclosure, Gray Metallic Sport GrillesModel: M3-650VEX-Mb-S-Gm-iIdeal for powersports, marine and off-road vehicle applications, these enclosed speaker systems include our high-performance, M3 6.5-inch marine coaxial speakers with silk dome tweeters housed in rugged, injection-molded enclosures to deliver clean, loud audio.A rotating clamp receiver is included with each VEX™ pod to mate with an appropriate fixture (sold separately) for mounting to a flat surface, roll-cage or tower structure, allowing precise aiming for optimum sound. Pipe mounting fixtures (sold separately) are available in a variety of sizes to fit a wide range of tube diameters.A weatherproof, Lexan™ rear logo appliqu trims the rear of each pod, which can be oriented to match any mounting position. For convenience, ten feet of our 16AWG marine-grade, parallel conductor speaker cable is included with each VEX™ pod.Although VEX™ pods can be used with as little as 20 W per channel, we recommend powering these systems with an amplifier capable of 60-120 W of continuous power per channel. For best results, use with a subwoofer.Like all JL Audio marine speakers, this system is weatherproof and built to deliver years of listening enjoyment.The Sport Grille’s frame features an integrated, multi-color LED lighting assembly designed to produce vibrant accent illumination for a dramatic visual experience on your high seas adventure. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended. Professional installation is strongly recommended.Product is pictured with Pipe-Mounting Clamps (sold separately).Specifications Continuous Power Handling (RMS) 60 W Recommended Amplifier Power (RMS) 20 - 120 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 100 Hz - 25 KHz ± 3 dB What's in the Box: M3-650VEX x2 Lexan Logo Appliqu s x 2
$619.99
-
JL Audio JL Audio XDM Marine Amplifier Monoblock Subwoofer Amplifier 600 Watt 12v
Jl Audio XDM600/1 Monoblock, Class D, Car/Marine Subwoofer Amplifier, 600 WModel: XDM600/1This potent monoblock amplifier employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output from a very compact chassis. Don't let its small size fool you, though... the XDM/600/1 generates serious subwoofer power, delivering a full 600 W of continuous power into a 2 ohm load (14.4V, 1% THD).Designed for car or boat installations, the XDM600/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.Targeted specifically for subwoofer applications, the XDM600/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captain’s chair.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.Specifications @ 4 ? 400 W RMS x 1 @ 3 ? 500 W RMS x 1 @ 2 ? 600 W RMS x 1 @ 1.5 ? N/A Rated Continuous (RMS) Power @ 12.5 V @ 4 ? 300 W RMS x 1 @ 3 ? 400 W RMS x 1 @ 2 ? 500 W RMS x 1 @ 1.5 ? N/A General Specifications Frequency Response 7 Hz - 500 Hz (+0, -1dB) S/N Ratio, referred to highest rated power >87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >67 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ? >1000 / 50 Hz Damping Factor @ 2 ? >500 / 50 Hz THD+N @ Rated Power <1% @ 2 ? per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass only Filter Slope(s) 12/24 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometer Yes Filter Defeat Function Yes Infrasonic Filter 30 Hz, defeatable Bass Boost EQ No Output Polarity Switch No Remote Subwoofer Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Bass EQ Boost Control No Pass-Through Preamp Output Buffered Input Voltage Rated Continuous (RMS) Power @ 14.4 V
$599.99
-
JL Audio JL Audio M6 6.5in Coaxial Speakers White Classic Grille
JL Audio M6 6.5in Coaxial Speakers White Classic GrilleModel: M6-650X-C-3GwM6 6.5-inch Marine Coaxial Speakers (75 W, 4 ohms) - Gloss White Trim Ring, Gloss White Classic Grille, White Tweeter MeshPurpose-engineered and built for real marine duty, M6 coaxial systems deliver maximum audio performance in any open-air boating environment.A DMA-optimized, long excursion woofer design and excellent power handling ensures your music will come through loud and clear at speed, or at anchor.A 0.8-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-650-X Coaxial Systems can be used with as little as 25 W per channel, for best audio performance we recommend amplifiers capable of between 75-150 W of continuous power per channel.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 55 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 6.90 in / 175 mm Bolt Hole Circle Diameter 6.13 in / 156 mm Mounting Hole Diameter 5.00 - 5.25 in / 127 - 133 mm Mounting Depth 3.00 in. / 76 mm
$599.99
-
JL Audio JL Audio M6 6.5in Coaxial Speakers White Sport Grille
JL Audio M6 6.5in Coaxial Speakers White Sport GrilleModel: M6-650X-S-GwGwM6 6.5-inch Marine Coaxial Speakers (75 W, 4 ohms) - Gloss White Trim Ring, Gloss White Classic Grille, White Tweeter MeshA DMA-optimized, long excursion woofer design and excellent power handling ensures your music will come through loud and clear at speed, or at anchor.A 0.8-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-650-X Coaxial Systems can be used with as little as 25 W per channel, for best audio performance we recommend amplifiers capable of between 75-150 W of continuous power per channel.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 55 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 6.90 in / 175 mm Bolt Hole Circle Diameter 6.13 in / 156 mm Frontal Grille Protrusion 0.94 in / 24 mm Mounting Hole Diameter 5.00 - 5.25 in / 127 - 133 mm Mounting Depth 3.00 in. / 76 mm
$599.99
-
JL Audio JL Audio M6 6.5in Coaxial Speakers White Classic Grille Black Tweeter
JL Audio M6 6.5in Coaxial Speakers White Classic Grille Black TweeterModel: M6-650X-C-GwGwM6 6.5-inch Marine Coaxial Speakers (75 W, 4 ohms) - Gloss White Trim Ring, Gloss White Classic Grille, Black Tweeter MeshPurpose-engineered and built for real marine duty, M6 coaxial systems deliver maximum audio performance in any open-air boating environment.A DMA-optimized, long excursion woofer design and excellent power handling ensures your music will come through loud and clear at speed, or at anchor.A 0.8-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. You will appreciate the clean, articulate high-frequency response of the M6 dome tweeter, especially at higher volume levels.A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic, solid-state tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-650-X Coaxial Systems can be used with as little as 25 W per channel, for best audio performance we recommend amplifiers capable of between 75-150 W of continuous power per channel.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold as a pair.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 75 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 55 Hz - 25 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 6.90 in / 175 mm Bolt Hole Circle Diameter 6.13 in / 156 mm Frontal Grille Protrusion 0.94 in / 24 mm Mounting Hole Diameter 5.00 - 5.25 in / 127 - 133 mm Mounting Depth 3.00 in. / 76 mm
$599.99
-
JL Audio JL Audio M3 VeX 6.5in Enclosed System White Sport Grille With RGB LED
JL Audio M3 6.5-inch (165 mm) Enclosed Coaxial System with RGB LED Lighting, Gloss White Enclosure, Gloss White Sport GrillesModel: M3-650VEX-Gw-S-Gw-iIdeal for powersports, marine and off-road vehicle applications, these enclosed speaker systems include our high-performance, M3 6.5-inch marine coaxial speakers with silk dome tweeters housed in rugged, injection-molded enclosures to deliver clean, loud audio.A rotating clamp receiver is included with each VEX™ pod to mate with an appropriate fixture (sold separately) for mounting to a flat surface, roll-cage or tower structure, allowing precise aiming for optimum sound. Pipe mounting fixtures (sold separately) are available in a variety of sizes to fit a wide range of tube diameters.A weatherproof, Lexan™ rear logo appliqu trims the rear of each pod, which can be oriented to match any mounting position. For convenience, ten feet of our 16AWG marine-grade, parallel conductor speaker cable is included with each VEX™ pod.Although VEX™ pods can be used with as little as 20 W per channel, we recommend powering these systems with an amplifier capable of 60-120 W of continuous power per channel. For best results, use with a subwoofer.Like all JL Audio marine speakers, this system is weatherproof and built to deliver years of listening enjoyment.The Sport Grille’s frame features an integrated, multi-color LED lighting assembly designed to produce vibrant accent illumination for a dramatic visual experience on your high seas adventure. Add an optional RGB controller to create thousands of color variations. Professional installation is strongly recommended. Professional installation is strongly recommended.Product is pictured with Pipe-Mounting Clamps (sold separately).Specifications Continuous Power Handling (RMS) 60 W Recommended Amplifier Power (RMS) 20 - 120 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 100 Hz - 25 KHz ± 3 dB What's in the Box: M3-650VEX x2 Lexan Logo Appliqu s x 2
$599.99
-
JL Audio JL Audio M3 VeX 6.5in Enclosed System Gray Sport Grille
JL Audio M3 6.5-inch (165 mm) Enclosed Coaxial System, Matte Black Enclosure, Gray Metallic Sport GrillesModel: M3-650VEX-Mb-S-GmIdeal for powersports, marine and off-road vehicle applications, these enclosed speaker systems include our high-performance, M3 6.5-inch marine coaxial speakers with silk dome tweeters housed in rugged, injection-molded enclosures to deliver clean, loud audio.A rotating clamp receiver is included with each VEX™ pod to mate with an appropriate fixture (sold separately) for mounting to a flat surface, roll-cage or tower structure, allowing precise aiming for optimum sound. Pipe mounting fixtures (sold separately) are available in a variety of sizes to fit a wide range of tube diameters.A weatherproof, Lexan™ rear logo appliqu trims the rear of each pod, which can be oriented to match any mounting position. For convenience, ten feet of our 16AWG marine-grade, parallel conductor speaker cable is included with each VEX™ pod.Although VEX™ pods can be used with as little as 20 W per channel, we recommend powering these systems with an amplifier capable of 60-120 W of continuous power per channel. For best results, use with a subwoofer.Like all JL Audio marine speakers, this system is weatherproof and built to deliver years of listening enjoyment.Product is pictured with Pipe-Mounting Clamps (sold separately).Specifications Continuous Power Handling (RMS) 60 W Recommended Amplifier Power (RMS) 20 - 120 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 100 Hz - 25 KHz ± 3 dB What's in the Box: M3-650VEX x2 Lexan Logo Appliqu s x 2
$569.99
-
JL Audio JL Audio M3 VeX 6.5in Enclosed System White Sport Grille
JL Audio M3 6.5-inch (165 mm) Enclosed Coaxial System, Gloss White Enclosure, Gloss White Sport GrillesModel: M3-650VEX-Gw-S-GwIdeal for powersports, marine and off-road vehicle applications, these enclosed speaker systems include our high-performance, M3 6.5-inch marine coaxial speakers with silk dome tweeters housed in rugged, injection-molded enclosures to deliver clean, loud audio.A rotating clamp receiver is included with each VEX™ pod to mate with an appropriate fixture (sold separately) for mounting to a flat surface, roll-cage or tower structure, allowing precise aiming for optimum sound. Pipe mounting fixtures (sold separately) are available in a variety of sizes to fit a wide range of tube diameters.A weatherproof, Lexan™ rear logo appliqu trims the rear of each pod, which can be oriented to match any mounting position. For convenience, ten feet of our 16AWG marine-grade, parallel conductor speaker cable is included with each VEX™ pod.Although VEX™ pods can be used with as little as 20 W per channel, we recommend powering these systems with an amplifier capable of 60-120 W of continuous power per channel. For best results, use with a subwoofer.Like all JL Audio marine speakers, this system is weatherproof and built to deliver years of listening enjoyment.Product is pictured with Pipe-Mounting Clamps (sold separately).Specifications Continuous Power Handling (RMS) 60 W Recommended Amplifier Power (RMS) 20 - 120 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 100 Hz - 25 KHz ± 3 dB What's in the Box: M3-650VEX x2 Lexan Logo Appliqu s x 2
$549.99
-
JL Audio JL Audio M6 10in Subwoofer with Titanium Sport Grille RGB LED
JL Audio M6 10in Subwoofer with Titanium Sport Grille RGB LED93647Model: M6-10W-S-GmTi-i-4M6 10-inch Marine Subwoofer with Transflective™ LED Lighting for Enclosed Use (250 W, 4 ohms) - Gray Metallic Trim Ring, Titanium Sport GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6-10W subwoofers are designed to operate in a compact sealed enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-10W is best used with amplifier power in the 75W - 250W range and is optimized to operate in a compact 0.75 cu. ft. (21.2 l) sealed enclosure, or a 1.50 cu. ft. (42.5 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab. If you need a Subwoofer that operates without a dedicated enclosure, select one of our Infinite Baffle Subwoofers instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Bolt Hole Circle Diameter 9.70 in / 247 mm Frontal Grilles Protrusion 1.66 in / 42 mm Mounting Hole Diameter 8.875 in / 225 mm Mounting Depth 5.90 in / 150 mm Driver Displacement 0.052 cu ft / 1.47 L Net Weight 12.60 lb / 5.70 kg Parameters Free Air Resonance (Fs) 34.58 Hz Electrical "Q" (Qes) 0.522 Mechanical "Q" (Qms) 9.78 Total Speaker "Q" (Qts) 0.496 Equivalent Compliance (Vas) 1.22 cu ft / 34.49 L One-Way Linear Excursion (Xmax)* 0.52 in / 13.2 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.4 dB SPL Effective Piston Area (Sd) 50.11 sq in / 0.0323 sq m DC Resistance (Re) 3.61 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 0.75 cu ft / 21.2 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 7.25 in / 184 mm F3 41.54 Hz Fc 53.41 Hz Qtc 0.8035 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 1.50 cu ft / 42.5 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 13.125 in / 333 mm Internal Port Diameter (ID) 3 in / 76 mm Port Length 11.125 in / 283 mm Tuning Frequency (Fb) 31 Hz F3 29.81 Hz
$529.99
-
JL Audio JL Audio M6 10in Subwoofer with Titanium Sport Grille Infinite Baffle, RGB LED
JL Audio M6 10in Subwoofer with Titanium Sport Grille Infinite Baffle, RGB LED93638Model: M6-10IB-S-GmTi-i-4M6 10-inch Marine Subwoofer with Transflective™ LED Lighting for Infinite-Baffle Use (250 W, 4 ohms) - Gray Metallic Trim Ring, Titanium Sport GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-10IB is best used with amplifier power in the 75W - 250W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Bolt Hole Circle Diameter 9.70 in / 247 mm Frontal Grille Protrusion 1.66 in / 42 mm Mounting Hole Diameter 8.875 in / 225 mm Mounting Depth 5.90 in / 150 mm Driver Displacement 0.052 cu ft / 1.47 L Net Weight 12.60 lb / 5.70 kg Parameters Free Air Resonance (Fs) 43.76 Hz Electrical "Q" (Qes) 0.907 Mechanical "Q" (Qms) 11.315 Total Speaker "Q" (Qts) 0.84 Equivalent Compliance (Vas) 0.54 cu ft / 15.29 L One-Way Linear Excursion (Xmax)* 0.52 in / 13.2 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.1 dB SPL Effective Piston Area (Sd) 50.11 sq in / 0.0323 sq m DC Resistance (Re) 4.54 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.00 cu ft / 56.6 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 16.25 in / 413 mm F3 41.54 Hz Fc 53.41 Hz Qtc 1.0253 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.50 cu ft / 70.8 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 20.50 in / 676 mm Internal Port Diameter 4 in / 102 mm Port Length 12 in / 305 mm Tuning Frequency (Fb) 37 Hz F3 25.09 Hz
$529.99
-
JL Audio JL Audio Speaker Cable 380ft 12 AWG Parallel Conductor
JL Audio Speaker Cable 380ft 12 AWG Parallel Conductor90254Model: XM-WHTSC12-380 True 12 AWG Specification, Pure OFC Copper Wire Tinned for corrosion resistance (marine-ready) Soft, flexible PVC Wire Jacket 12 AWG Premium Marine Speaker Cable - Bulk Spool: 380 ft. (115.8 m)Our premium 12 AWG Speaker Cable is ideal for connection of marine speaker systems and features parallel conductors, tinned for corrosion resistance. The soft, flexible white PVC jacket makes the wire very flexible, and the all-copper wire construction makes sure your signals are transmitted with minimal resistance.USA Limited Warranty: Two (2) years from the original date of purchase
$516.74
-
JL Audio JL Audio JLid Communication and Network Bridge for MVI Amplifiers
JL Audio JLid Communication and Network Bridge for MVI Amplifiers98652Model: MVi-HUB MVi-HUB includes the following features: JLid-COMM Connections: 1 Master Input / 5 Slave Outputs JLid-CTRL Connections: 1 Accessory Port Amp Identifier Status LEDs Powered via JLid™ connection to MVi amplifiers JLid™ Comm & Network Bridge Hub for MV & MVi AmplifiersThe MVi marine amplifier ecosystem is designed to be very flexible, offering users almost limitless combinations of amplifiers and channel architectures, along with the amazing power of integrated DSP technology.The MVi-HUB greatly simplifies the configuration of a multi-amp system by allowing all amplifiers of an amplifier network to appear in a single TüN® software session. Networking synchronizes the DSP presets of all amplifiers and distributes commands from a single, optional Digital Remote Controller (M-DRC-50 or DRC-205, sold separately) across the entire amplifier network. DRC commands can include Master Volume, Subwoofer Level, Fader, Zone Level and Preset Selection (functionality varies by model).The MVi-HUB includes JLid-COMM ports to connect up to six amplifiers (one "Master" MVi amplifier and up to five "Slave" MV or MVi amplifiers) using standard CAT5e cables, allowing users to quickly switch between amplifiers during the tuning process, without disconnecting and connecting multiple cables.A dedicated JLid-CTRL accessory port is also included to connect an optional DRC or VXi-BTC Bluetooth® Communicator (each sold separately). The VXi-BTC accessory enables convenient wireless setup and tuning of the entire amplifier network using a compatible iOS® or Android® device with the TüN® Mobile App.For ease of connection, the MVi-HUB is powered via connected amplifiers and requires no separate power or turn-on wiring (Note: MVi-HUB operation requires at least one "Master" MVi amplifier connection.)USA Limited Warranty: Two (2) years from the original date of purchase.
$499.99
-
JL Audio JL Audio MX Marine Amplifier 3-Channel Full-Range 600 Watts 12v
JL Audio MX Marine Amplifier 3-Channel Full-Range 600 Watts 12v98409Model: MX600/33-Channel Class D System Amplifier, 100 W x 2 + 400 W x 1 @ 2 ohms / 75 W x 2 + 250 W x 1 @ 4 ohms - 14.4VEngineered specifically for powersports applications, the 3-channel MX600/3 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum housing is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.Generating a potent 75W x 2 into 4 ohms, plus a solid 400 watts for a subwoofer system, the MX600/3 makes a great all-in-one solution for driving a complete audio system from a single, ultra-compact chassis.Onboard filters include a 12 dB / octave high-pass crossover on the main channels and a dedicated 24 dB / octave low-pass crossover for the subwoofer channel. Other features include a bass boost EQ, variable infrasonic filter and subwoofer output polarity switch. A dual-range input section accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Rated Continuous (RMS) Power @ 14.4 V Main Channels @ 4 ohms 75 W RMS x 2 Main Channels @ 2 ohms 100 W RMS x 2 Main Channels - Bridged @ 4 ohms 200 W RMS x 1 Subwoofer Channel @ 4 ohms 250 W RMS x 1 Subwoofer Channel @ 3 ohms 300 W RMS x 1 Subwoofer Channel @ 2 ohms 400 W RMS x 1 Subwoofer Channel @ 1.5 ohms N/A Rated Continuous (RMS) Power @ 12.5 V Main Channels @ 4 ohms 50 W RMS x 2 Main Channels @ 2 ohms 80 W RMS x 2 Main Channels - Bridged @ 4 ohms 100 W RMS x 1 Subwoofer Channel @ 4 ohms 200 W RMS x 1 Subwoofer Channel @ 3 ohms 250 W RMS x 1 Subwoofer Channel @ 2 ohms 300 W RMS x 1 Subwoofer Channel @ 1.5 ohms N/A General Specifications Frequency Response 20 Hz - 20 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >88 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >68 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >92 / 50 Hz Damping Factor @ 2 ohms >43 / 50 Hz THD+N @ Rated Power (Main Channels) <1% @ 2 ohms per Ch. THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 ohms per Ch. Input Voltage Range @ RCA Inputs Switchable from 250 mV - 4 V RMS (Low) to 580 mV - 14 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 60 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Slope(s) 12 dB/octave Filter Frequency Range: Channels 1 & 2 (front) 35 Hz - 300 Hz Filter Frequency Range: Subwoofer Channel 40 Hz - 400 Hz Filter Mode(s): Channels 1 & 2 (front) High-Pass only Filter Mode(s): Subwoofer Channel Low-Pass only Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Remote Subwoofer Level Control Optional (RBC-1) Remote Level Modes N/A Channel Input Mode Switch Yes (2/4 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A Physical Specifications Height 1.77 in / 45 mm Width 9.33 in / 237 mm Depth 4.50 in / 115 mm What's in the Box: (1) Amplifier (4) Stainless steel mounting screws (1) User manual
$499.99
-
JL Audio JL Audio MFD Data Interface for MediaMaster
JL Audio MFD Data Interface for MediaMaster99956Model: MMA-1-HTMLNMEA 2000® Network, MFD Data Interface for MediaMaster® MM105 & MM105-HRThe MMA-1-HTML is a NMEA 2000® certified data interface engineered to generate MediaMaster® themed UI navigation and controls directly onto your vessel's compatible MFD (Multi-Function Display). Exclusively designed for use with compatible MediaMaster® source units, the MMA-1-HTML allows you to pilot your boat and control your MediaMaster® seamlessly, via your helm's MFD display.Outfitted with a NMEA 2000® Micro-C connector (LEN 1), the MMA-1-HTML interfaces with a vessel's NMEA 2000® network using applicable NMEA 2000® cables and connectors (not included). The MMA-1-HTML automatically recognizes the host MediaMaster® source unit and will then project its familiar screen info and navigation controls onto your MFD's display, resulting in a true MediaMaster® user experience.Compatible source unit models: MM105, MM105-HR, MM55, MM55-HRNote: Functionality of the MMA-1-HTML is derived from the host source unit and connected MFD. The MMA-1-HTML requires connection to a NMEA 2000® network or use of a MMC-PN2K powered network cable (sold separately) to simulate an isolated, stand-alone NMEA 2000® network.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Operating Voltage 14.4V DC (10V — 15.9V) Operating Temp Range -4 F to +149 F (-20 C to +65 C) Current Draw / Fuse Value 150 mA (max) / 1 A NMEA 2000® LEN 1 (Micro-C connector) Compatible MFDs Simrad, B&G, Lowrance, Garmin Dimensions 6.77 in. x 3.98 in. x 1.73 in. (172 mm x 101 mm x 44 mm
$499.99
-
JL Audio JL Audio XDM Marine Amplifier Monoblock 300 Watt 12v
J Audio XDM300/1 Monoblock, Class D, Car/Marine Subwoofer Amplifier, 300 WModel: XDM300/1This little monoblock powerhouse employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output for its size. It is small enough to fit in most tight space applications, including small boats, pickups, motorcycles and UTV’s (in a weather-tight compartment).Designed for car or boat installations, the XDM300/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.Targeted specifically for subwoofer applications, the XDM300/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captain’s chair.Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 Ohms 200 W RMS x 1 @ 3 Ohms 250 W RMS x 1 @ 2 Ohms 300 W RMS x 1 @ 1.5 Ohms N/A Rated Continuous (RMS) Power @ 12.5 V @ 4 Ohms 160 W RMS x 1 @ 3 Ohms 210 W RMS x 1 @ 2 Ohms 270 W RMS x 1 @ 1.5 Ohms N/A General Specifications Frequency Response 10 Hz - 1 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >100 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ? >120 / 50 Hz Damping Factor @ 2 ? >60 / 50 Hz THD+N @ Rated Power <1% @ 2 ? per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 30 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass only Filter Slope(s) 12/24 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometer Yes Filter Defeat Function Yes Infrasonic Filter none Bass Boost EQ No Output Polarity Switch No Remote Subwoofer Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Bass EQ Boost Control No Pass-Through Preamp Output Buffered Physical Specifications Height (H) 2.05 in / 52 mm Width (W) 6.85 in / 174 mm Depth (D) 7.09 in / 180 mm Net Weight 3.8 lb / 1.72 kg What's in the Box: XDM300/1 Amp Wrench Badge
$499.99
-
JL Audio JL Audio M6 10in Subwoofer with White Sport Grille RGB LED
JL Audio M6 10in Subwoofer with White Sport Grille RGB LED93645Model: M6-10W-S-GwGw-i-4M6 10-inch Marine Subwoofer with Transflective™ LED Lighting for Enclosed Use (250 W, 4 ohms) - Gloss White Trim Ring, Gloss White Sport GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6-10W subwoofers are designed to operate in a compact sealed enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-10W is best used with amplifier power in the 75W - 250W range and is optimized to operate in a compact 0.75 cu. ft. (21.2 l) sealed enclosure, or a 1.50 cu. ft. (42.5 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab. If you need a Subwoofer that operates without a dedicated enclosure, select one of our Infinite Baffle Subwoofers instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Bolt Hole Circle Diameter 9.70 in / 247 mm Frontal Grilles Protrusion 1.66 in / 42 mm Mounting Hole Diameter 8.875 in / 225 mm Mounting Depth 5.90 in / 150 mm Driver Displacement Driver Displacement Net Weight 12.60 lb / 5.70 kg Parameters Free Air Resonance (Fs) 34.58 Hz Electrical "Q" (Qes) 0.522 Mechanical "Q" (Qms) 9.78 Total Speaker "Q" (Qts) 0.496 Equivalent Compliance (Vas) 1.22 cu ft / 34.49 L One-Way Linear Excursion (Xmax)* 0.52 in / 13.2 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.4 dB SPL Effective Piston Area (Sd) 50.11 sq in / 0.0323 sq m DC Resistance (Re) 3.61 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 0.75 cu ft / 21.2 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 7.25 in / 184 mm F3 41.54 Hz Fc 53.41 Hz Qtc 0.8035 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 1.50 cu ft / 42.5 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 13.125 in / 333 mm Internal Port Diameter (ID) 3 in / 76 mm Port Length 11.125 in / 283 mm Tuning Frequency (Fb) 31 Hz F3 29.81 Hz
$499.99
-
$499.99
-
JL Audio JL Audio M6 10in Subwoofer with White Sport Grille Infinite Baffle, RGB LED
JL Audio M6 10in Subwoofer with White Sport Grille Infinite Baffle, RGB LED93636Model: M6-10IB-S-GwGw-i-4M6 10-inch Marine Subwoofer with Transflective™ LED Lighting for Infinite-Baffle Use (250 W, 4 ohms) - Gloss White Trim Ring, Gloss White Sport GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-10IB is best used with amplifier power in the 75W - 250W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Bolt Hole Circle Diameter 9.70 in / 247 mm Frontal Grilles Protrusion 1.66 in / 42 mm Mounting Hole Diameter 8.875 in / 225 mm Mounting Depth 5.90 in / 150 mm Driver Displacement 0.052 cu ft / 1.47 L Net Weight 12.60 lb / 5.70 kg Parameters Free Air Resonance (Fs) 43.76 Hz Electrical "Q" (Qes) 0.907 Mechanical "Q" (Qms) 11.315 Total Speaker "Q" (Qts) 0.84 Equivalent Compliance (Vas) 0.54 cu ft / 15.29 L One-Way Linear Excursion (Xmax)* 0.52 in / 13.2 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.1 dB SPL Effective Piston Area (Sd) 50.11 sq in / 0.0323 sq m DC Resistance (Re) 4.543 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.00 cu ft / 56.6 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 16.25 in / 413 mm F3 41.54 Hz Fc 53.41 Hz Qtc 1.0253 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.50 cu ft / 70.8 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 20.50 in / 676 mm Internal Port Diameter 4 in / 102 mm Port Length 12 in / 305 mm Tuning Frequency (Fb) 37 Hz F3 25.09 Hz
$499.99
-
JL Audio JL Audio M6 8.8in Coaxial Speakers White LUXe Grille Single Speaker
JL Audio M6 8.8in Coaxial Speakers White LUXe Grille Single Speaker M6-880X-L-GwGw-Single 93718Model: M6-880X-L-GwGw-SingleM6 8.8-inch Marine Coaxial Speaker (125 W, 4 ohms) - White Trim Ring, White Luxe GrilleM6 Luxe speakers are purpose-built to deliver top-flight audio performance and durability in luxury marine installations. Each model is outfitted with a low-profile mounting bezel with integrated tweeter bridge and a fine mesh grille for minimal protrusion into cabin space. The result is a discreet visual appearance able to blend in with the finest vessel surroundings.The same principle that allows our 7.7-inch marine speakers to dominate over conventional 6.5-inch designs is delivered in a more powerful dose with our M6-880X 8.8-inch coaxials. These 8.8-inch diameter monsters offer significant performance advantages over our 7.7 inch models, and a huge advantage over conventional 6.5 inch marine speakers. Thanks to 36% more cone area and almost double the excursion capability, the M6-880X's are capable of +6 dB greater low frequency output than our M6-770X 7.7-inch coaxial systems! The bass is so impressive that the M6-880X can be used without a subwoofer while still packing a very serious low-frequency punch. Used with a subwoofer, they offer vastly better dynamics and mid-bass impact than smaller speakers, making them the best choice when ultimate performance is desiredTo make sure that the high-frequencies sound just as good as the bass, our engineers have designed an oversized, 1.25-inch, silk dome tweeter for this model. This new tweeter plays louder, cleaner and extends lower in frequency to better mate with the 8.8-inch woofer. A multi-order, true 2-way passive crossover is concealed within the woofer chassis, shielded from vibration and corrosion. Also included, is an automatic tweeter protection circuit to minimize the possibility of tweeter failure.Although M6-880X Coaxial Systems can be used with as little as 50 W per channel, but for best audio performance we recommend amplifiers capable of between 50-250 W of continuous power per channel.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 125 W Recommended Amplifier Power (RMS) 50 - 250 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 ohms System Frequency Response 38 Hz - 20 KHz ± 3 dB Coaxial Physical Specifications Frame Outer Diameter 10.25 in / 260 mm Bolt Hole Circle Diameter 9.27 in / 235 mm Frontal Grille Protrusion 0.48 in / 12 mm Mounting Hole Diameter 8.625 in / 219 mm Mounting Depth 6.30 in / 160 mm
$499.99
-
JL Audio JL Audio M6 10in Subwoofer with Titanium Sport Grille RGB LED
JL Audio M6 10in Subwoofer with Titanium Sport Grille RGB LED93646Model: M6-10W-S-GmTi-4M6 10-inch Marine Subwoofer for Enclosed Use (250 W, 4 ohms) - Gray Metallic Trim Ring, Titanium Sport Grille.With appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6-10W subwoofers are designed to operate in a compact sealed enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-10W is best used with amplifier power in the 75W - 250W range and is optimized to operate in a compact 0.75 cu. ft. (21.2 l) sealed enclosure, or a 1.50 cu. ft. (42.5 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab. If you need a Subwoofer that operates without a dedicated enclosure, select one of our Infinite Baffle Subwoofers instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Bolt Hole Circle Diameter 9.70 in / 247 mm Frontal Grilles Protrusion 1.66 in / 42 mm Mounting Hole Diameter 8.875 in / 225 mm Mounting Depth 5.90 in / 150 mm Driver Displacement 0.052 cu ft / 1.47 L Net Weight 12.60 lb / 5.70 kg Parameters Free Air Resonance (Fs) 34.58 Hz Electrical "Q" (Qes) 0.522 Mechanical "Q" (Qms) 9.78 Total Speaker "Q" (Qts) 0.496 Equivalent Compliance (Vas) 1.22 cu ft / 34.49 L One-Way Linear Excursion (Xmax)* 0.52 in / 13.2 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.4 dB SPL Effective Piston Area (Sd) 50.11 sq in / 0.0323 sq m DC Resistance (Re) 3.619 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 0.75 cu ft / 21.2 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 7.25 in / 184 mm F3 41.54 Hz Fc 53.41 Hz Qtc 0.8035 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 1.50 cu ft / 42.5 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 13.125 in / 333 mm Internal Port Diameter (ID) 3 in / 76 mm Port Length 11.125 in / 283 mm Tuning Frequency (Fb) 31 Hz F3 29.81 Hz
$479.99
-
JL Audio JL Audio M6 10in Subwoofer with Titanium Sport Grille Infinite Baffle
JL Audio M6 10in Subwoofer with Titanium Sport Grille Infinite Baffle93637Model: M6-10IB-S-GmTi-4M6 10-inch Marine Subwoofer for Infinite-Baffle Use (250 W, 4 ohms) - Gray Metallic Trim Ring, Titanium Sport GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-10IB is best used with amplifier power in the 75W - 250W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Bolt Hole Circle Diameter 9.70 in / 247 mm Frontal Grille Protrusion 1.66 in / 42 mm Mounting Hole Diameter 8.875 in / 225 mm Mounting Depth 5.90 in / 150 mm Driver Displacement 0.052 cu ft / 1.47 L Net Weight 12.60 lb / 5.70 kg Parameters Free Air Resonance (Fs) 43.76 Hz Electrical "Q" (Qes) 0.907 Mechanical "Q" (Qms) 11.315 Total Speaker "Q" (Qts) 0.84 Equivalent Compliance (Vas) 0.54 cu ft / 15.29 L One-Way Linear Excursion (Xmax)* 0.52 in / 13.2 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.1 dB SPL Effective Piston Area (Sd) 50.11 sq in / 0.0323 sq m DC Resistance (Re) 4.54 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.00 cu ft / 56.6 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 16.25 in / 413 mm F3 41.54 Hz Fc 53.41 Hz Qtc 1.0253 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.50 cu ft / 70.8 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 20.50 in / 676 mm Internal Port Diameter 4 in / 102 mm Port Length 12 in / 305 mm Tuning Frequency (Fb) 37 Hz F3 25.09 Hz
$479.99
-
JL Audio JL Audio Multifunction Cable 250 ft 6-Conductor
JL Audio Multifunction Cable 250 ft 6-Conductor 90956Model: XM-WHTMFC-250 Stannum-Plated for Corrosion Resistance Fine-Strand Construction for Optimum Flexibility Marine-Grade White PVC jacket Multifunction Cable - Bulk Spool: 250 ft. (76.2 m)Conveniently includes speaker and power wire for LED speakers in one cable. Ideal for use with JL Audio speaker and subwoofers featuring LED illumination.Two (2) 16 AWG OFC Copper Speaker LeadsFour (4) 20 AWG OFC Copper Illumination LeadsUSA Limited Warranty: Two (2) years from the original date of purchase.
$477.74
-
JL Audio JL Audio MX Marine Amplifier 4-Channel Full-Range 500 Watts 12v
JL Audio MX Marine Amplifier 4-Channel Full-Range 500 Watts 12v98408Model: MX500/44-Channel Class D Full-Range Amplifier, 125 W x 4 @ 2 ohms / 70 W x 4 @ 4 ohms - 14.4VEngineered specifically for powersports applications, the 4-channel MX500/4 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.Generating a solid 70W x 4 into 4 ohms (14.4V, 1% THD), the MX500/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 250W x 2 into 4 ohms.Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications Rated Continuous (RMS) Power @ 14.4 V @ 4 ohms 70 W RMS x 4 @ 2 ohms 125 W RMS x 4 Bridged @ 4 ohms 250 W RMS x 2 Rated Continuous (RMS) Power @ 12.5 V @ 4 ohms 55 W RMS x 4 @ 2 ohms 90 W RMS x 4 Bridged @ 4 ohms 180 W RMS x 2 General Specifications Frequency Response 20 Hz - 20 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >88 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >70.5 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >92 / 50 Hz Damping Factor @ 2 ohms >43 / 50 Hz THD+N @ Rated Power <1% @ ohms per Ch. Input Voltage Range @ RCA Inputs Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12 dB/octave Filter Frequency Range 35 Hz - 300 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Remote Level Control No Remote Level Modes N/A Channel Input Mode Switch Yes (2/3/4 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A Physical Specifications Height 1.77 in / 45 mm Width 9.33 in / 237 mm Depth 4.50 in / 115 mm What's in the Box: (1) Amplifier (4) Stainless steel mounting screws (1) User manual
$449.99
-
JL Audio JL Audio MX Marine Amplifier Monoblock Wide-Range 500 Watts 12v
JL Audio MX Marine Amplifier Monoblock Wide-Range 500 Watts 12v98407Model: MX500/1Monoblock Class D Wide-Range Amplifier, 500 W x 1 @ 2 ohms / 300 W x 1 @ 4 ohms - 14.4VEngineered specifically for powersports applications, the MX500/1 monoblock amplifier employs our high-speed NexD™ switching design to pack a serious audio punch, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.With a robust 500W of clean power into a 2-ohm load (14.4V, 1% THD), use one to drive a subwoofer, or grab a pair to deliver stunning output to a subwoofer system. The MX500/1 also features an adjustable low-pass crossover, a bass boost EQ, variable infrasonic filter and output polarity switch.Its dual-range input section accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals. With the addition of an M-RBC-1 remote level control (sold separately), subwoofer output can be directly controlled from the driver’s seat.This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Rated Continuous (RMS) Power @ 14.4 V @ 4 ohms 300 W RMS x 1 @ 3 ohms 400 W RMS x 1 @ 2 ohms @ 4 ? 300 W RMS x 1 @ 3 ? 400 W RMS x 1 @ 2 ohms 500 W RMS x 1 @ 1.5 ohms N/A Rated Continuous (RMS) Power @ 12.5 V @ 4 ohms 250 W RMS x 1 @ 3 ohms 300 W RMS x 1 @ 2 ohms 400 W RMS x 1 @ 1.5 ohms N/A General Specifications Frequency Response 20 Hz - 12 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >97 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >70 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >115 / 50 Hz Damping Factor @ 2 ohms >54 / 50 Hz THD+N @ Rated Power <1% @ 2 ohms Input Voltage Range @ RCA Inputs Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass only Filter Slope(s) 24 dB/octave Filter Frequency Range 40 Hz - 400 Hz Detented, Calibrated Filter Freq. Potentiometer Yes Filter Slope(s) 24 dB/octave Filter Frequency Range 40 Hz - 400 Hz Detented, Calibrated Filter Freq. Potentiometer Yes Filter Defeat Function Yes Infrasonic Filter 20 Hz - 40 Hz, variable Bass Boost EQ 0 to +12 dB @ 43 Hz Output Polarity Switch Yes Remote Subwoofer Level Control Optional (M-RBC-1) Remote Bass EQ Boost Control No Pass-Through Preamp Output None Physical Specifications Height 1.77 in / 45 mm Width 9.33 in / 237 mm Depth 4.50 in / 115 mm What's in the Box: (1) Amplifier (4) Stainless steel mounting screws (1) User manual
$449.99
-
JL Audio JL Audio M6 10in Subwoofer with White Sport Grille
JL Audio M6 10in Subwoofer with White Sport Grille93644Model: M6-10W-S-GwGw-4M6 10-inch Marine Subwoofer for Enclosed Use (250 W, 4 ohms) - Gloss White Trim Ring, Gloss White Sport GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6-10W subwoofers are designed to operate in a compact sealed enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-10W is best used with amplifier power in the 75W - 250W range and is optimized to operate in a compact 0.75 cu. ft. (21.2 l) sealed enclosure, or a 1.50 cu. ft. (42.5 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab. If you need a Subwoofer that operates without a dedicated enclosure, select one of our Infinite Baffle Subwoofers instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Bolt Hole Circle Diameter 9.70 in / 247 mm Frontal Grille Protrusion Frontal Grilles Protrusion Mounting Hole Diameter 8.875 in / 225 mm Mounting Depth 5.90 in / 150 mm Driver Displacement 0.052 cu ft / 1.47 L Net Weight 12.60 lb / 5.70 kg Parameters Free Air Resonance (Fs) 34.58 Hz Electrical "Q" (Qes) 0.522 Mechanical "Q" (Qms) 9.78 Total Speaker "Q" (Qts) 0.496 Equivalent Compliance (Vas) 1.22 cu ft / 34.49 L One-Way Linear Excursion (Xmax)* 0.52 in / 13.2 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.4 dB SPL Effective Piston Area (Sd) 50.11 sq in / 0.0323 sq m DC Resistance (Re) 3.619 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 0.75 cu ft / 21.2 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 7.25 in / 184 mm F3 41.54 Hz Fc 53.41 Hz Qtc 0.8035 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 1.50 cu ft / 42.5 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 13.125 in / 333 mm Internal Port Diameter 3 in / 76 mm Port Length 11.125 in / 283 mm Tuning Frequency (Fb) 31 Hz F3 29.81 Hz
$449.99
-
JL Audio JL Audio M6 10in Subwoofer with White Classic Grille
JL Audio M6 10in Subwoofer with White Classic Grille93642Model: M6-10W-C-GwGw-4M6 10-inch Marine Subwoofer for Enclosed Use (250 W, 4 ohms) - Gloss White Trim Ring, Gloss White Classic GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6-10W subwoofers are designed to operate in a compact sealed enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-10W is best used with amplifier power in the 75W - 250W range and is optimized to operate in a compact 0.75 cu. ft. (21.2 l) sealed enclosure, or a 1.50 cu. ft. (42.5 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab. If you need a Subwoofer that operates without a dedicated enclosure, select one of our Infinite Baffle Subwoofers instead.and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchaseSpecifications General Specifications Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Bolt Hole Circle Diameter 9.70 in / 247 mm Frontal Grille Protrusion 1.66 in / 42 mm Mounting Hole Diameter 8.875 in / 225 mm Mounting Hole Diameter 8.875 in / 225 mm Mounting Depth 5.90 in / 150 mm Driver Displacement 0.052 cu ft / 1.47 L Net Weight 12.60 lb / 5.70 kg Parameters Free Air Resonance (Fs) 34.58 Hz Electrical "Q" (Qes) 0.522 Mechanical "Q" (Qms) 9.78 Total Speaker "Q" (Qts) 0.496 Equivalent Compliance (Vas) 1.22 cu ft / 34.49 L One-Way Linear Excursion (Xmax)* 0.52 in / 13.2 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.4 dB SPL Effective Piston Area (Sd) 50.11 sq in / 0.0323 sq m DC Resistance (Re) 3.619 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 0.75 cu ft / 21.2 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 7.25 in / 184 mm F3 41.54 Hz Fc 53.41 Hz Qtc 0.8035 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 1.50 cu ft / 42.5 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 13.125 in / 333 mm Internal Port Diameter 3 in / 76 mm Port Length 11.125 in / 283 mm Tuning Frequency (Fb) 31 Hz F3 29.81 Hz
$449.99
-
JL Audio JL Audio M6 10in Subwoofer with White Sport Grille Infinite Baffle
JL Audio M6 10in Subwoofer with White Sport Grille Infinite Baffle93635Model: M6-10IB-S-GwGw-4M6 10-inch Marine Subwoofer for Infinite-Baffle Use (250 W, 4 ohms) - Gloss White Trim Ring, Gloss White Sport GrilleWith appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.Purpose-engineered and built for real marine duty, the M6 infinite-baffle woofers are designed to operate without a dedicated enclosure. Long excursion capability and rugged suspension systems help produce deep, powerful bass response that will transform your boat's audio system.The M6-10IB is best used with amplifier power in the 75W - 250W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 56.6 l). If you need a Subwoofer that operates in a small sealed enclosure, select our M6-10W, instead.Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.Sold individually.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications General Specifications Continuous Power Handling (RMS) 250 W Nominal Impedance (Znom) 4 ohms Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter 10.75 in / 273 mm Bolt Hole Circle Diameter 9.70 in / 247 mm Frontal Grille Protrusion 1.66 in / 42 mm Mounting Hole Diameter 8.875 in / 225 mm Mounting Depth 5.90 in / 150 mm Driver Displacement 0.052 cu ft / 1.47 L Net Weight 12.60 lb / 5.70 kg Parameters Free Air Resonance (Fs) 43.76 Hz Electrical "Q" (Qes) 0.907 Mechanical "Q" (Qms) 11.315 Total Speaker "Q" (Qts) 0.84 Equivalent Compliance (Vas) 0.54 cu ft / 15.29 L One-Way Linear Excursion (Xmax)* 0.52 in / 13.2 mm Reference Efficiency (no) 0.28% Efficiency (1 W / 1 m)** 86.1 dB SPL Effective Piston Area (Sd) 50.11 sq in / 0.0323 sq m DC Resistance (Re) 4.54 ohms * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder". Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.00 cu ft / 56.6 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 16.25 in / 413 mm F3 41.54 Hz Fc 53.41 Hz Qtc 1.0253 Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 2.50 cu ft / 70.8 L External Width 17 in / 432 mm External Height 17 in / 432 mm External Depth 20.50 in / 676 mm Internal Port Diameter 4 in / 102 mm Port Length 12 in / 305 mm Tuning Frequency (Fb) 37 Hz F3 25.09 Hz
$449.99
You have seen 96 out of 208 products