-
JL Audio JL Audio Light Caps For 6.5in VeX Models and 7.7in ETXv3
JL Audio Enclosed Speaker System Light Caps for 7.7-inch ETXv3 and 6.5-inch VeX™ models, PairModel: M-LCA-C-WMachined aluminum rear covers with LED down light for 7.7-inch ETXv3 and 6.5-inch VeX™ enclosed speakersTake your ETXv3 and VeX™ speaker systems to the next level with these light caps.Purpose-built for 7.7-inch ETXv3 and VeX™ enclosures, each cap features machined aluminum construction and a built-in, down-firing LED strip to illuminate the area below with brilliant white light. Installation requires just a single hole to be drilled. For retrofitting, each light cap can mount over an enclosure’s existing rear logo cap.Note: Independent light cap functionality is not compatible with M3 or M6 ETXv3 and VEX™ systems equipped with RGB LED lighting.Sold as a pair. Adds 0.655" of thickness to the rear of each enclosure.
$205.51
-
JL Audio JL Audio MMR-5N2K Volume Controller for MediaMaster
JL Audio MMR-5N2K Volume Controller for MediaMaster99948Model: MMR-5N2K NMEA 2000® Certified (LEN 2) Weatherproof design (IPX7 rated) for real marine duty Large rotary design for easy adjustments, especially while in motion One knob simultaneously adjusts all audio zones Simple, push-button audio mute/unmute control Integrated status LED ring with programmable brightness Front-mounted design requires just a single 1.5-inch (38 mm) hole for installation Automatically recognizes which MediaMaster® source unit model is connected MediaMaster® NMEA 2000® network wired remote volume controllerThe MMR-5N2K is a wired remote designed to add auxiliary volume control to compatible MediaMaster® source units.Outfitted with a NMEA 2000® Micro-C connector, the MMR-5N2K connects to a host MediaMaster® source unit in two ways: (1)Direct interface with a vessel's NMEA 2000® network using applicable NMEA 2000® cables and connectors (not included) (2)Direct connection to single MediaMaster® source unit using MMC-PN2K powered network cables (sold separately) to simulate an isolated, stand-alone NMEA 2000® networkEngineered for real-world marine (and many outdoor) applications, its weatherproof (IPX7 rated) design is built to withstand the harshest environments.USA Limited Warranty: Two (2) years from the original date of purchase.Note: The MMR-5N2K should only be used with a single MediaMaster® source unit, connected via a NMEA 2000® network or MMC-PN2K powered network cables (sold separately). The level control mode for each audio zone of the host source unit must be set to Relative or Variable. When connected, all audio zones will adjust simultaneously. Functionality of the MMR-5N2K is solely derived from the host MediaMaster® source unit.
$169.99
-
JL Audio JL Audio MMR-20-BE Round Wired Remote for MediaMaster
JL Audio MMR-20-BE Round Wired Remote for MediaMaster99921Model: Power On/Off Source Select Volume Up/Down Track Up/Down (USB & BT) Track Fast-Forward/Fast-Rewind (USB) Favorite Up/Down (Radio) Play/Pause (USB & BT) Mute/Unmute (Radio & Aux) Round, wired, non-display remote controller for use with MediaMaster®The MMR-20-BE is a wired remote controller engineered to add auxiliary control functionality to MediaMaster® source units.Built for marine and off-road applications, its weatherproof (IP67 rated) design places frequently used functions of your MediaMaster® source unit in a simple, intuitive design that’s easy-to-use. Its large, backlit controls and LED source indicators are easily identifiable, day or night, with brightness settings that can be adjusted using your MediaMaster® source unit.A small footprint and simple, one-hole design means the MMR-20-BE can be installed in even the tightest of spaces. Depending on your system layout, you may add up to three MMR-20-BE remote controllers to a single MediaMaster® source unit. Each MMR-20 can be connected up to 75 ft. (22.8 m) away from its source unit.USA Limited Warranty: Two (2) years from the original date of purchase.Note: Requires MMC Connection Cables (sold separately). Connection cables are available in several lengths to fit your specific application. Y-splitters are also available to connect up to three remotes to a MediaMaster® source unit.Specifications Physical Specifications Maximum Mounting Panel Thickness 1.5 in / 38 mm Mounting Hole Diameter 2 in / 50 mm Rear Depth* 1.16 in / 29 mm Width 2.36 in / 60 mm Height 2.36 in / 60 mm Depth 0.59 in / 15 mm *Total mounting depth is greater (and varies by installation) with mounting bracket.
$169.99
-
JL Audio JL Audio Aluminum Mounting Pod for Component Tweeter
JL Audio Billet Aluminum Pods for Tweeter Mounting, PairModel: MTPOD-M100-CLClear Anodized, Billet Aluminum Pods for Tweeter Mounting - Sold in Pairs (tweeters not included).Beautifully crafted from billet aluminum, the MTPOD-M100 tweeter pods offer a great and convenient option for mounting your JL Audio marine component tweeters.Purpose-engineered to precisely house all Legacy M-Series component tweeters (sold separately), each pod is machined from a single piece of billet aluminum with a clear anodized finish, making them extremely durable and corrosion-resistant. Designed for surface or deck mounting, each pod’s base is angled upward slightly for expanded dispersion and includes a dedicated pathway to conceal wiring, for a clean appearance when installed.Like all JL Audio marine speakers, these pods are built to withstand a real saltwater marine environment and deliver years of enjoyment.Sold as a pair.
$160.84
-
JL Audio JL Audio 2.500in Pipe Mount Brackets for ETXv3 Series
JL Audio 2.500in Pipe Mount Brackets for ETXv3 Series91271Model: M-MCPv3-2.500Mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.USA Limited Warranty: Two (2) years from the original date of purchase.
$160.84
-
JL Audio JL Audio 2.375in Pipe Mount Brackets for ETXv3 Series
JL Audio 2.375in Pipe Mount Brackets for ETXv3 Series91270Model: M-MCPv3-2.375Mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.USA Limited Warranty: Two (2) years from the original date of purchase.
$160.84
-
JL Audio JL Audio 2.250in Pipe Mount Brackets for ETXv3 Series
JL Audio 2.250in Pipe Mount Brackets for ETXv3 Series91269Model: M-MCPv3-2.250Mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.USA Limited Warranty: Two (2) years from the original date of purchase.
$160.84
-
JL Audio JL Audio 2.000in Pipe Mount Brackets for ETXv3 Series
JL Audio 2.000in Pipe Mount Brackets for ETXv3 Series91268Model: M-MCPv3-2.000Mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.USA Limited Warranty: Two (2) years from the original date of purchase
$160.84
-
JL Audio JL Audio 1.900in Pipe Mount Brackets for ETXv3 Series
JL Audio 1.900in Pipe Mount Brackets for ETXv3 Series91267Model: M-MCPv3-1.900Mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.USA Limited Warranty: Two (2) years from the original date of purchase
$160.84
-
JL Audio JL Audio 1.660in Pipe Mount Brackets for ETXv3 Series
JL Audio 1.660in Pipe Mount Brackets for ETXv3 Series91266Model: M-MCPv3Mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.USA Limited Warranty: Two (2) years from the original date of purchase
$160.84
-
JL Audio JL Audio 1.315in Pipe Mount Brackets for ETXv3 Series
JL Audio 1.315in Pipe Mount Brackets for ETXv3 Series91265Model: M-MCPv3Mounting fixture for ETXv2 and ETXv3 models. Sold in pairs.USA Limited Warranty: Two (2) years from the original date of purchase
$160.84
-
JL Audio JL Audio 3.000 in Pipe Mount Brackets for VeX Series
JL Audio 3.000 in Pipe Mount Brackets for VeX Series93710Model: PS-SWMCP-B-3.000Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$151.90
-
JL Audio JL Audio 2.875 in Pipe Mount Brackets for VeX Series
JL Audio 2.875 in Pipe Mount Brackets for VeX Series93709Model: PS-SWMCP-B-2.875Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$151.90
-
JL Audio JL Audio 2.750 in Pipe Mount Brackets for VeX Series
JL Audio 2.750 in Pipe Mount Brackets for VeX Series93708Model: PS-SWMCP-B-2.750Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$151.90
-
JL Audio JL Audio 2.625 in Pipe Mount Brackets for VeX Series
JL Audio 2.625 in Pipe Mount Brackets for VeX Series93707Model: PS-SWMCP-B-2.625Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$151.90
-
JL Audio JL Audio 2.250 in Pipe Mount Brackets for VeX Series
JL Audio 2.250 in Pipe Mount Brackets for VeX Series91192Model: PS-SWMCP-B-2.250Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$151.90
-
JL Audio JL Audio Black Anodized Surface Mount for VeX Series
JL Audio Black Anodized Surface Mount for VeX Series91190Model: PS-SWMCP-B-SMBlack Anodized Surface Mounting fixture for VeX models. Sold in pairs.Designed to attach VeX™ Enclosed Speaker Systems to flat surfaces, these low-profile mounting fixtures are precision-machined from marine-grade aluminum to create rock-solid attachment points. A swivel-mounting base is included with each fixture for 360 degrees of total rotation, allowing precise aiming of each VeX™ pod for optimum sound. Each fixture features a tough, black anodized finish that’s UV/corrosion-resistant and includes stainless-steel hardware for years of durability in all outdoor environments. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$151.90
-
JL Audio JL Audio 2.375 in Pipe Mount Brackets for VeX Series
JL Audio 2.375 in Pipe Mount Brackets for VeX Series91185Model: PS-SWMCP-B-2.375Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$151.90
-
JL Audio JL Audio Clear Anodized Surface Mount for VeX Series
JL Audio Clear Anodized Surface Mount for VeX Series91191Model: PS-SWMCP-C-SMClear Anodized Surface Mounting fixture for VeX models. Sold in pairs.Designed to attach VeX™ Enclosed Speaker Systems to flat surfaces, these low-profile mounting fixtures are precision-machined from marine-grade aluminum to create rock-solid attachment points. A swivel-mounting base is included with each fixture for 360 degrees of total rotation, allowing precise aiming of each VeX™ pod for optimum sound. Each fixture features a tough, clear anodized finish that’s UV/corrosion-resistant and includes stainless-steel hardware for years of durability in all outdoor environments. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$151.90
-
JL Audio JL Audio 3.250 in Pipe Mount Brackets for VeX Series
JL Audio 3.250 in Pipe Mount Brackets for VeX Series93711Model: PS-SWMCP-B-3.250Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$151.90
-
JL Audio JL Audio 2.500 in Pipe Mount Brackets for VeX Series
JL Audio 2.500 in Pipe Mount Brackets for VeX Series93706Model: PS-SWMCP-B-2.500Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$151.90
-
JL Audio JL Audio MBT-CRXv3 Bluetooth Controller and Receiver MBT-CRXv3 91905
Jl Audio MBT-CRXv3 Water-resistant Audio Controller and Receiver with Bluetooth® Wireless TechnologyModel: MBT-CRXv3Engineered for marine, motorsports and outdoor applications, the MBT-CRXv3 wireless receiver is designed to deliver top-quality streaming audio to almost any sound system over land or water.Housed in a compact and water-resistant chassis (IP67-rated), this premium audio receiver is well suited for small watercraft, motorcycles, golf carts and utility vehicles. Needing just a single hole for installation, the MBT-CRXv3 wireless receiver can function as a stand-alone, wireless audio source unit or as an add-on, wireless audio controller and receiver. Large backlit controls permit easy operation day or night, and an adaptor plate is included for front-mount applications or where rear access is limited.Outfitted with BLUETOOTH wireless technology and the Qualcomm® aptX™ HD audio codec, MBT-CRXv3 delivers dynamic, CD-like sound from your compatible streaming device from up to 35’ (11 meters) away. Two sets of stereo preamp outputs (4-volt RMS) are on hand to feed two main audio zones plus a dedicated subwoofer output. Independent audio zone level controls with LED color indicators ensure effortless command of your sound system while your streaming device is tucked away.The receiver includes +12-volt (1 amp) remote turn-on output for amplifier control.Specifications General Specifications Bluetooth® Core Specification Version 5.0 with Qualcomm® aptX™-HD audio Current Draw 83 mA (at idle) / 108 mA (at full output) Input Operating Voltage 8 - 16 VDC Fuse Rating 2A Mini ATC Output Voltage 4V RMS Frequency Response 20 Hz - 20 kHz (±1dB) Connection Range* Up to 35 ft / 11 m S/N Ratio 101 dB (20 Hz - 20 kHz) Remote Turn-on Output Capacity 350 mA (max) Bluetooth® Profile A2DP (High-Quality, Stereo Audio) Outputs Two Stereo Pairs Per Zone, Plus One Mono Subwoofer (RCA Plugs) *Maximum range is achieved in line-of-sight installations. Actual range will vary based on installation specifics. Physical Specifications Diameter 2.15 in / 55 mm Mounting Depth (A) 2.36 in / 60 mm Mounting Hole Diameter 1.125 in / 29 mm (minimum diameter for mounting with rear of panel access)1.875 in / 48 mm (maximum for front mounting with plate) What's in the Box: MBT-CRXv3 Controller Locking collar 2.3mm spacer 1.27mm spacer Square bezel Square Gasket M4 x 16mm screw x 4
$149.99
-
JL Audio JL Audio M880ETX-CVR Neoprene Cover Fits 8.8n ETX Systems
JL Ausio M880ETX-CVR Neoprene Cover Fits 8.8n ETX Systems95853Model: ETX-CVRNeoprene covers to protect ETX enclosed speaker systems during storage and traileringHaving undergone over 1000 hours of salt/fog and UV testing, these durable protective cases are designed to provide stylish but serious protection for ETX Enclosed Speaker Systems (v2 or v3).Constructed from 3mm Neoprene, each cover is laminated with dark gray spandex and classically finished with a woven "JL Audio / How we play" trim label. Designed to protect the finish of your investments, this marine-ready material features tiny laser-cut holes at the bottom that are just big enough to let water drain out, and purposely small enough to never let insects in. A single, high-quality #5 zipper with locking slider on the front facilitates quick and easy covering or removal. This case is the perfect solution to problematic dust, grime and other environmental invaders that can be harmful to your speaker while your boat is docked or traileredOwners of ETXv2/v3 Enclosed Speaker Systems, these are for you.Designed to work with any mounting clamp/application.Sold in pairs.Care Instructions: Rinse with clean, fresh water and air dry. Do not expose to harsh chemicals or cleaning agents.
$134.03
-
JL Audio JL Audio M770ETX-CVR Neoprene Cover Fits 7.7in ETX Systems
JL Audio M770ETX-CVR Neoprene Cover Fits 7.7in ETX Systems95850Model: ETX-CVRNeoprene covers to protect ETX enclosed speaker systems during storage and traileringHaving undergone over 1000 hours of salt/fog and UV testing, these durable protective cases are designed to provide stylish but serious protection for ETX Enclosed Speaker Systems (v2 or v3).Constructed from 3mm Neoprene, each cover is laminated with dark gray spandex and classically finished with a woven "JL Audio / How we play" trim label. Designed to protect the finish of your investments, this marine-ready material features tiny laser-cut holes at the bottom that are just big enough to let water drain out, and purposely small enough to never let insects in. A single, high-quality #5 zipper with locking slider on the front facilitates quick and easy covering or removal. This case is the perfect solution to problematic dust, grime and other environmental invaders that can be harmful to your speaker while your boat is docked or trailered.Owners of ETXv2/v3 Enclosed Speaker Systems, these are for you.Designed to work with any mounting clamp/application.Sold in pairs.Care Instructions: Rinse with clean, fresh water and air dry. Do not expose to harsh chemicals or cleaning agents.
$134.03
-
JL Audio JL Audio Rotary DRC Adapter For MVi Amplifiers
JL Audio Digital Preset Controller for JLid™ compatible productsModel: MVi-DRCADAPT The M-DRC-50 is a panel-mount, wired digital preset controller designed to connect to the JLid™ port of compatible JL Audio electronics. Built-in RGB LED indicator displays selected preset by color Weatherproof construction (IP66 rated, from the front, when properly installed) One-hole mount design accommodates panels up to 3/4" (19 mm) thick 18 ft. (5.5 m) control cable included, with protective connection sleeve Powered via the JLid™ connection; separate power wiring is not needed. Digital Preset Controller for JLid™ compatible productsThe M-DRC-50 is a panel-mount, wired digital preset controller designed to connect to the JLid™ port of compatible JL Audio electronics.The M-DRC-50 is compatible with the following JL Audio products: MVi-HUB: Connects to the JLid™ COMM Port MVi Amplifiers*: Connects to the JLid™ COMM Port *Not compatible with mono MV amplifiers.What's in the Box: Push button switch 18ft Cable
$126.74
-
JL Audio JL Audio 1.500 in Pipe Mount Brackets for VeX Series
JL Audio 1.500 in Pipe Mount Brackets for VeX Series91189Model: PS-SWMCP-B-1.500Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$116.15
-
JL Audio JL Audio 1.25 in Pipe Mount Brackets for VeX Series
JL Audio 1.25 in Pipe Mount Brackets for VeX Series91188Model: PS-SWMCP-B-1.250Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$116.15
-
JL Audio JL Audio 1.00 in Pipe Mount Brackets for VeX Series
JL Audio 1.00 in Pipe Mount Brackets for VeX Series91187Model: PS-SWMCP-B-1.000Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$116.15
-
JL Audio JL Audio 2.000 in Pipe Mount Brackets for VeX Series
JL Audio 2.000 in Pipe Mount Brackets for VeX Series91184Model: PS-SWMCP-B-2.000Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$116.15
-
JL Audio JL Audio 1.875 in Pipe Mount Brackets for VeX Series
JL Audio 1.875 in Pipe Mount Brackets for VeX Series91183Model: PS-SWMCP-B-1.875Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$116.15
-
JL Audio JL Audio 1.750 in Pipe Mount Brackets for VeX Series
JL Audio 1.750 in Pipe Mount Brackets for VeX Series 91182Model: PS-SWMCP-B-1.750Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$116.15
-
JL Audio JL Audio 1.625 in Pipe Mount Brackets for VeX Series
JL Audio 1.625 in Pipe Mount Brackets for VeX Series91181Model: PS-SWMCP-B-1.625Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$116.15
-
JL Audio JL Audio 1.850 in Pipe Mount Brackets for VeX Series
JL Audio 1.850 in Pipe Mount Brackets for VeX Series93705Model: PS-SWMCP-B-1.850Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase
$116.15
-
JL Audio JL Audio 1.7 in Pipe Mount Brackets for VeX Series
JL Audio 1.7 in Pipe Mount Brackets for VeX Series93704Model: PS-SWMCP-B-1.700Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$116.15
-
JL Audio JL Audio 1.375 in Pipe Mount Brackets for VeX Series
JL Audio 1.375 in Pipe Mount Brackets for VeX Series93703Model: PS-SWMCP-B-1.375Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$116.15
-
JL Audio JL Audio 1.125 in Pipe Mount Brackets for VeX Series
JL Audio 1.125 in Pipe Mount Brackets for VeX Series93702Model: Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase
$116.15
-
JL Audio JL Audio 0.875 in Pipe Mount Brackets for VeX Series
JL Audio 0.875 in Pipe Mount Brackets for VeX Series93701Model: PS-SWMCP-B-0.875Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$116.15
-
JL Audio JL Audio 0.75 in Pipe Mount Brackets for VeX Series
JL Audio 0.75 in Pipe Mount Brackets for VeX Series93700Model: PS-SWMCP-B-0.750Pipe Mounting fixture (Swivel) for VeX models. Sold in pairs.Low-profile, machined mounting fixtures provide rock-solid attachment points for the VeX™ Enclosed Systems to a variety of roll cage diameters. They feature the JL Audio name logo machined in the side. Each mounting fixture set is designed to mount two VeX™ Pods.USA Limited Warranty: Two (2) years from the original date of purchase.
$116.15
-
JL Audio JL Audio Digital Preset Controller for JLid Compatible Products
JL Audio Digital Preset Controller for JLid™ compatible productsModel: M-DRC-50 The M-DRC-50 is a panel-mount, wired digital preset controller designed to connect to the JLid™ port of compatible JL Audio electronics. Built-in RGB LED indicator displays selected preset by color Weatherproof construction (IP66 rated, from the front, when properly installed) One-hole mount design accommodates panels up to 3/4" (19 mm) thick 18 ft. (5.5 m) control cable included, with protective connection sleeve Powered via the JLid™ connection; separate power wiring is not needed. Digital Preset Controller for JLid™ compatible productsThe M-DRC-50 is a panel-mount, wired digital preset controller designed to connect to the JLid™ port of compatible JL Audio electronics.The M-DRC-50 is compatible with the following JL Audio products: MVi-HUB: Connects to the JLid™ COMM Port MVi Amplifiers*: Connects to the JLid™ COMM Port *Not compatible with mono MV amplifiers.What's in the Box: Push button switch 18ft Cable
$116.15
-
JL Audio JL Audio 12v Power Connection Kit 9 AWG Within 12 ft XMD-PCS30A-1-L12 90400
JL Audio Premium 9 AWG 12V Power Marine Connection Kit, Single Amplifier, Within 12 ft of BatteryModel: XMD-PCS30A-1-L12Premium 9 AWG 12-Volt Power Connection System for Single Amplifier - 30A MaximumIdeal for most Center Consoles, Pontoons, Runabouts and Towboats where amplifier location is 12 feet (3.7 m) from battery, or closerThis kit contains everything you need to make secure, high-integrity power connections using ABYC-Standard colored wires. Ensure the safety of your audio system and vessel with the included MAXI® Fuse and Fuse Holder. As with all our Premium kits, the power wire is true AWG-spec, pure OFC copper, which is tinned to combat corrosion.What's in the Box: Red 9 AWG Tinned Power Wire (with one Power Ring) - 2 ft (0.6 m) Red 9 AWG Tinned Power Wire (unterminated) - 10 ft (3 m) Yellow 9 AWG Tinned Ground Wire (with one Power Ring) - 12 ft (3.7 m) Blue 16 AWG Remote Turn-On Wire - 18 ft (5.5 m) 30 Amp MAXI® Fuse and Fuse Holder - XD-MFBW-MAXI Four 4-inch wire tires 4mm hex wrench
$104.99
-
JL Audio JL Audio MMR-25W Wireless Remote Controller with Bluetooth for MediaMaster
JL Audio MMR-25W Wireless Remote Controller with Bluetooth for MediaMaster99955Model: MMR-25W MediaMaster® MMR-25W remote control functions (source dependent) include: Power On/Off Source Selection Audio Zone Selection/Lock Volume Up/Down Track Up/Down Track Fast-Forward/Fast-Rewind Favorite Up/Down Tuner Seek Up/Down Play/Pause Mute/Unmute Wireless Remote Controller with Bluetooth® Technology for use with MediaMaster®Outfitted with ultra-efficient, Bluetooth® Low Energy technology, the MMR-25W controller delivers convenient handheld command of your MediaMaster® source unit (MM105 or MM105-HR), from up to 35 feet (11 m) away.Featuring a sealed, water-resistant (IP68 rated) design and large button layout, the MMR-25W remote controller incorporates an ergonomic, key-fob form that allows comfortable operation of frequently used functions, all while on the move. Onboard LEDs permit easy selection and adjustment of all or specific audio zones. Constructed with UV and salt-water rated materials, the MMR-25W controller is built to withstand the harshest outdoor elements. For added convenience, a silicone wrist lanyard and mounting cradle are included. The cradle’s simplistic design permits installation on any flat surface. A replaceable 3V (CR2032) battery is also included. Up to eight remotes* can be directly paired to a single source unit (additional remotes sold separately).Featuring a sealed, water-resistant (IP68 rated) design and large button layout, the MMR-25W remote controller incorporates an ergonomic, key-fob form that allows comfortable operation of frequently used functions, all while on the move. Onboard LEDs permit easy selection and adjustment of all or specific audio zones. Constructed with UV and salt-water rated materials, the MMR-25W controller is built to withstand the harshest outdoor elements. For added convenience, a silicone wrist lanyard and mounting cradle are included. The cradle’s simplistic design permits installation on any flat surface. A replaceable 3V (CR2032) battery is also included. Up to eight remotes* can be directly paired to a single source unit (additional remotes sold separately).USA Limited Warranty: Two (2) years from the original date of purchase.Specifications System Specifications Operating Range Up to 35 ft. (11 m) Transmitter Specifications IP Rating IP68 Battery CR2032 (replaceable) Height 3.15 in / 80 mm Width 2.56 in / 65 mm Depth 0.49 in / 12 mm
$99.99
-
JL Audio JL Audio 25 ft 6-Conductor White Multifunction Cable
JL Audio 25 ft 6-Conductor White Multifunction Cable90955Model: XM-WHTMFC-25 Stannum-Plated for Corrosion Resistance Fine-Strand Construction for Optimum Flexibility Marine-Grade White PVC jacket Multifunction Cable - 25 ft. (7.62 m)Conveniently includes speaker and power wire for LED speakers in one cable. Ideal for use with JL Audio speaker and subwoofers featuring LED illumination.Two (2) 16 AWG OFC Copper Speaker LeadsFour (4) 20 AWG OFC Copper Illumination LeadsUSA Limited Warranty: Two (2) years from the original date of purchase
$80.41
-
JL Audio JL Audio 25 ft 4 Channel Audio Interconnect Cable
JL Audio 25 ft 4 Channel Audio Interconnect Cable90442Model: XMD-WHTAIC4-25 Twisted-Pair Construction to Reject Noise Pure OFC Copper Conductors with Polyethylene Dielectrics Molded Connector Bodies Machined Brass Connector Elements USA Limited Warranty: Two (2) years from the original date of purchase 4-channel Marine Audio Interconnect Cable - 25 ft. (7.62 m)
$77.99
-
JL Audio JL Audio MMP-2-BK Mounting Adapter Plate for MM50/MM40
JL Audio MMP-2-BK Mounting Adapter Plate for MM50/MM40 99929Model: MMP-2-BKMounting Adaptor Plate for JL Audio® MM55, MM50 & MMR-40The MMP-2-BK mounting adaptor plate allows you to install a MediaMaster® MM55, MM50 or MMR-40 into existing source unit openings that are larger than needed (up to 8.17 x 3-inch / 208 x 80 mm). Constructed from a single piece of marine-grade, machined aluminum, the MMP-2-BK provides a solid surface to mount your MediaMaster® MM55, MM50 or MMR-40 in locations previously occupied by other marine manufacturers’ source units.Featuring a durable, black anodized finish that’s both UV and corrosion-resistant, the MMP-2-BK includes stainless-steel hardware and a full-surface gasket to ensure a secure and watertight installation. Panel mounting holes are countersunk and thoughtfully positioned to keep them concealed behind the trim ring of the MM55, MM50 or MMR-40 for a clean and uncluttered look.
$75.94
-
JL Audio JL Audio MMP-1-BK Mounting Adapter Plate for MM105/MM100s
JL Audio MMP-1-BK Mounting Adapter Plate for MM105/MM100s99919Model: MMP-1-BKMounting Adaptor Plate for JL Audio® MM105 and MM100s Source UnitThe MMP-1-BK mounting adaptor plate allows you to install a MediaMaster® MM105 or MM100s into existing source unit openings that are larger than required (up to 8.17 x 3-inch / 208 x 80 mm). Constructed from a single piece of marine-grade, machined aluminum, the MMP-1-BK provides a solid surface to mount your MediaMaster® in locations previously occupied by other marine manufacturers’ source units.Featuring a durable, black anodized finish that’s both UV and corrosion-resistant, the MMP-1-BK includes stainless-steel hardware and a full-surface gasket to ensure a secure and watertight installation. Panel mounting holes are countersunk and thoughtfully positioned to keep them concealed behind the trim ring of the source unit for a clean and uncluttered look.
$75.94
-
JL Audio Jl Audio Powered Network 25ft Cable for NMEA2000 Compatible MediaMaster Source Units
Jl Audio Powered Network 25ft Cable for NMEA2000 Compatible MediaMaster Source Units99928Model: MMC-PN2K-25Powered Network Cable for connection of compatible NMEA 2000® MediaMaster® source units - 25 ft (7.62 m)This powered network cable is designed to simulate an isolated, stand-alone NMEA 2000® network for the connection of a compatible MediaMaster® source unit (sold separately) with one MediaMaster® MMR-40 NMEA 2000® Network Controller (sold separately) or compatible MFD (Multi-Function Display).Note: JL Audio® Powered Network Cables support a maximum of two NMEA 2000® devices. For systems with additional NMEA 2000® devices, a genuine NMEA 2000® network must be assembled, which does not support JL Audio® Powered Network Cables. Connection of MM100s (not MM100s-BE) requires MMC-DN2K-1 or MMC-DN2K-6 to adapt the Deutsch connector on the MM100s to a NMEA 2000® 5-pin Micro-C connector.
$63.36
-
JL Audio JL Audio 12 ft 4 Channel Audio Interconnect Cable
JL Audio 12 ft 4 Channel Audio Interconnect Cable90441Model: XMD-WHTAIC4-12 Twisted-Pair Construction to Reject Noise Pure OFC Copper Conductors with Polyethylene Dielectrics Molded Connector Bodies Machined Brass Connector Elements USA Limited Warranty: Two (2) years from the original date of purchase 4-channel Marine Audio Interconnect Cable - 12 ft. (3.66 m)
$63.36
-
$62.54
You have seen 192 out of 208 products