Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use (M6 / 1/4 in). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA. Flat base hatches cannot be used with Trim kits or Roller shades Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Flat Base Smoke Grey 17.6 1/2 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Length Flat X1 (in) Cut-Out Width Flat Y1 (in) Cut-Out Radii Flat R1 (in) 22 5/8 22 5/8 1 11/16 3 3/16 14 7/16 19 3/4 19 3/4 1 9/16

Read more less

Stern thruster tunnel kit for 140TT thrusters. Must purchase 140TT thruster separately.

Read more less

The Lewmar 'Wavespring' self-tailer combines their renowned and gentle wave grip feature with self adjusting springs. It handles today's smaller diameters, as well as the traditional larger Dacron composite ropes. A sleek, minimum-friction feeder arm provides absolute snag-free operation. Specifications Gear Ratio Power Ratio Weight(lb) 2:1 15.8:1 6.4 Dimensions Drum Diameter D(in) Base Diameter B(in) Height H(in) Line Entry L(in) Line Size(in) 2 9/16 4 3/4 5 3/4 2 5/16 5/16-1/2

Read more less

Panel mount AutoAnchors. Suitable for DC electric windlasses using all-chain or rope/chain rode and hydraulic or AC powered windlasses using all-chain rode. It works with the Lewmar prefitted reed switch sensors It has additional diagnostics to help troubleshooting the windless Large LCD display shows at a glance how much anchor is out "One touch" automatic function deploys and retrieves a preset length of anchor rode Docking alarm and pre-set stopping point help protect the boat during anchor retrieval Adjustable red backlighting ensures clear night operation Choice of feet or metres rode measurement Safety lock reduces unwanted windlass operation Easy installation and set up Install up to 2 units on the boat Weather cover to protect the console unit Console colour grey

Read more less

Lewmar USA Premium 8-Plaited Nylon Anchor Rope 8-Plaited nylon rope eliminates some of the service problems associated with the 3-strand ropes. 8-Plait uses 8-individual braided strands woven together that allow the rope to be relaxed. But, when under load, it tightens up to a firm lay. The higher the load the harder the lay becomes. 8-Plait carries the same tensile strength as 3-Strand. 8-Plait does not coil or create a "birds nest" in the locker like 3-Strand will. 8-Plait flakes and falls upon itself. 8-Plait will not twist and knot up. 8-Plait will not loop over onto itself. 8-Plait has less stretch so it will not bury itself deep into the gypsy's grip when overloaded, which means less damage to the stripper when the windlass is abused or overloaded. 8-Plait pays off of the windlass into the locker much like chain, allowing for better use of smaller locker designs. 8-Plait is 80% less prone to becoming stiff when used in salt water than 3-Strand. 8-Plait nylon rope is 1/3 more absorbent than 3-Strand rope. More absorbent means more weight; more weight means better fall into the anchor locker. 8-Plait should be soaked in water (salt or fresh - it does not matter) to pre-lubricate the rope so it can be used in the windlass initially. When rope is used dry and new, we have seen either slippage or sticking in the rope pocket of the gypsy. Once the rope is wet and used, it out performs the 3-Strand. The longer it is used the better it gets.

Read more less

Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use (M6 / 1/4 in). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA. Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) 1 in Flange Smoke Grey 11 1/2 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Length Flat X1 (in) Cut-Out Width Flat Y1 (in) Cut-Out Radii Flat R1 (in) 20 1/16 20 1/16 1 11/16 3 3/16 11 7/8 17 3/8 17 3/8 1 11/16

Read more less

Lewmars EVOTM Winch Range evolution from the renowned Ocean winch. Features Easy Servicing - No tools required User friendly direction arrows All the benefits of the EVOTM range Convertable to electric Notes:Mounting Instructions 5 x M6 (1/4 in) c'sk head screws on 94mm (3 11/16 in) PCD <font size="1 in>5/16 - 9/16

Read more less

Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use (M6 / 1/4 in). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA. Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) 1 in Flange Smoke Grey 10.5 3/8 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Length Flat X1 (in) Cut-Out Width Flat Y1 (in) Cut-Out Radii Flat R1 (in) 19 1/8 19 1/8 1 9/16 2 15/16 3/16 11 3/4 16 9/16 9/16 1 11/16

Read more less

Lewmar 22lb Epsilon Stainless Steel AnchorModel: 0057510 Super-High Holding Power Galvanised and stainless steel versions Anti-snagging design Optional roll bar for sailboat application Ballasted tip for fast setting Fully compatible with Lewmar bow rollers The Epsilon super-high holding power anchor builds upon the legendary Delta(R) anchor's robustness and quality. Its concave fluke and ballast keel ensure market-leading holding power and rapid setting, while maintaining self-launching characteristics with Lewmar bow rollers and retaining the same shank geometry as the original Delta(R).Time-proven materials are used throughout the range: manganese steel or 316 stainless steel for maximum strength.

Read more less

The sleekly designed Low Profile Hatch is ideal for use on a powerboat. Smaller ventilation hatches are a better fit for sailboats, while the larger sizes can be used as foredeck hatches on smaller to mid size yachts. Lewmar hatches feature Lewmar's unique sealing system allowing easy acrylic replacement. All sizes suitable for CE Area 2 (Deck, Coachroof, Cockpit and Transom). <table cellpadding="0 in style="border-collapse: collapse" border="1 in> Support System Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Self Supporting 9/16 Smoke Grey 12.8 3/8 Dimensions <table cellpadding="0 in style="border-collapse: collapse" border="1 in> Diameter Ø (in) Height Z (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Diameter Ø1 (in) 23 1/8 1 23 1/4 6 13/16 20 3/8

Read more less

Lewmar 10kg/22lb DTX Stainless Steel AnchorModel: 0057210 Manufactured from 316 stainless steel Self launching Ordinary Holding Power certified Guaranteed for 3 years against breakage Every DTX anchor is certified to Lloyd's Ordinary Holding Power standard. The new DTX anchor fills the gap between the existing galvanised and stainless Delta(R) anchors, allowing boat owners and builders to specify a stainless steel anchor for a significantly reduced outlay.Made from 316 stainless steel, the DTX anchors feature exceptional anti-corrosional performance and the enhanced aesthetics that stainless anchors offer. Utilising lead ballast encapsulated within the tip of the anchor to achieve the perfect centre of gravity, the DTX offers the initial bite and holding reliability that users of our Delta(R) anchors have come to expect.

Read more less

Lewmar USA Premium 8-Plaited Nylon Anchor Rope 8-Plaited nylon rope eliminates some of the service problems associated with the 3-strand ropes. 8-Plait uses 8-individual braided strands woven together that allow the rope to be relaxed. But, when under load, it tightens up to a firm lay. The higher the load the harder the lay becomes. 8-Plait carries the same tensile strength as 3-Strand. 8-Plait does not coil or create a "birds nest" in the locker like 3-Strand will. 8-Plait flakes and falls upon itself. 8-Plait will not twist and knot up. 8-Plait will not loop over onto itself. 8-Plait has less stretch so it will not bury itself deep into the gypsy's grip when overloaded, which means less damage to the stripper when the windlass is abused or overloaded. 8-Plait pays off of the windlass into the locker much like chain, allowing for better use of smaller locker designs. 8-Plait is 80% less prone to becoming stiff when used in salt water than 3-Strand. 8-Plait nylon rope is 1/3 more absorbent than 3-Strand rope. More absorbent means more weight; more weight means better fall into the anchor locker. 8-Plait should be soaked in water (salt or fresh - it does not matter) to pre-lubricate the rope so it can be used in the windlass initially. When rope is used dry and new, we have seen either slippage or sticking in the rope pocket of the gypsy. Once the rope is wet and used, it out performs the 3-Strand. The longer it is used the better it gets.

Read more less

Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use (M6 / 1/4 in). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA. Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) 1 in Flange Smoke Grey 9.09 3/8 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Length Flat X1 (in) Cut-Out Width Flat Y1 (in) Cut-Out Radii Flat R1 (in) 15 3/8 20 1/2 1 9/16 2 15/16 3/16 13 3/16 12 7/8 18 1 11/16

Read more less

Lewmar Size 30 Ocean Hatch with Flat BaseModel: 39630050 Friction levers hold the lid open in any position up to 95 deg Anodised aluminium frame for corrosion resistance Suitable for CE Area 2 (Deck, Coachroof, Cockpit and Transom). With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements, whatever conditions you might face.SpecificationsOverall Dimensions L x W x H15 3/8 x 20 1/2 in x 1 9/16 in Cut-Out Dimensions L x W x H 12 11/16 in x 17 13/16 in x 1 9/16 in Hidge Width 13 3/16 in Acrylic Window Thickness 3/8 in "

Read more less

Lewmar USA Premium 8-Plaited Nylon Anchor Rope 8-Plaited nylon rope eliminates some of the service problems associated with the 3-strand ropes. 8-Plait uses 8-individual braided strands woven together that allow the rope to be relaxed. But, when under load, it tightens up to a firm lay. The higher the load the harder the lay becomes. 8-Plait carries the same tensile strength as 3-Strand. 8-Plait does not coil or create a "birds nest" in the locker like 3-Strand will. 8-Plait flakes and falls upon itself. 8-Plait will not twist and knot up. 8-Plait will not loop over onto itself. 8-Plait has less stretch so it will not bury itself deep into the gypsy's grip when overloaded, which means less damage to the stripper when the windlass is abused or overloaded. 8-Plait pays off of the windlass into the locker much like chain, allowing for better use of smaller locker designs. 8-Plait is 80% less prone to becoming stiff when used in salt water than 3-Strand. 8-Plait nylon rope is 1/3 more absorbent than 3-Strand rope. More absorbent means more weight; more weight means better fall into the anchor locker. 8-Plait should be soaked in water (salt or fresh - it does not matter) to pre-lubricate the rope so it can be used in the windlass initially. When rope is used dry and new, we have seen either slippage or sticking in the rope pocket of the gypsy. Once the rope is wet and used, it out performs the 3-Strand. The longer it is used the better it gets.

Read more less

Lewmar 10LB LFX Anchoring Kit with 15 feet 5/16 G4 Chain 200 feet 5/8 in 8-Plait LineModel: 69600925Made from lightweight and strong

Read more less

Its unique shank profile and ballasted tip make the Delta anchor self-launching. The low centre of gravity and self-righting geometry ensure that the Delta anchor will set immediately. Consistent and reliable in performance, the Delta anchor has Lloyd's Register Type Approval as a High Holding Power anchor and is specified as the primary anchor used by numerous National Lifeboat organizations. Also available in premium grade Duplex/High Tensile stainless steel. All Delta anchors are "guaranteed for life against breakage". Lloyd's Test Certification is available for individual Delta anchors by arrangement. **Damage by deformation or bending is not covered by this guarantee.

Read more less

Support System Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Self Supporting 9/16 Smoke Grey 10.8 5/16 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Cut-Out Length X1 (in) Cut-Out Width Y1 (in) Cut-Out Radii R1 (in) 18 3/16 22 11/16 1 2 7/8 15 7/16 19 15/16 1 11/16 Mounting Instructions Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use M6 (1/4 in). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA.

Read more less

Lewmar 14lb Epsilon Stainless Steel AnchorModel: 0057506 Super-High Holding Power Galvanised and stainless steel versions Anti-snagging design Optional roll bar for sailboat application Ballasted tip for fast setting Fully compatible with Lewmar bow rollers The Epsilon super-high holding power anchor builds upon the legendary Delta(R) anchor's robustness and quality. Its concave fluke and ballast keel ensure market-leading holding power and rapid setting, while maintaining self-launching characteristics with Lewmar bow rollers and retaining the same shank geometry as the original Delta(R).Time-proven materials are used throughout the range: manganese steel or 316 stainless steel for maximum strength.

Read more less

Lewmar 21LB LFX Alloy FlukeAnchorModel: 0058110 High-grade anodized aluminum components Lightweight and strong holding power Quickly disassembles for stowage No welds Adjustable shank/fluke angle dependent on sea-bed Easily replaceable parts The new Lewmar LFX fluke anchor is constructed from High-grade anodized aluminum components delivering a lightweight, stylish anchor with a powerful holding power.The FLX Quickly disassembles for stowage as well as making parts easily replaceable. The FLX has an adjustable angled fluke for faster setting in sand or mud seabeds making it the ideal secondary anchor.

Read more less

Support System Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Self Supporting 9/16 Smoke Grey 10.6 5/16 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Cut-Out Length X1 (in) Cut-Out Width Y1 (in) Cut-Out Radii R1 (in) 17 5/8 22 11/16 1 2 7/8 14 13/16 19 15/16 1 11/16 Mounting Instructions Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use M6 (1/4 in). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA.

Read more less

Lewmar VectorTM Manual Shallow Water Anchor - WhiteModel: 2024008752 Keeps your boat anchored securely in up to 8 ft. of water Quick, simple deployment with manual tensioning strap Effortless manual operation means no hoses, pumps, or wires Gas spring secured penetrating fiberglass spike for reliable positioning Corrosion-resistant powder-coated aluminum finish Versatile mounting options fit nearly any style of boat Lightweight design compatible with powerboats up to 22 ft. or 3,000 lbs. The Vector manual shallow water anchor by Lewmar provides precision positioning in up to 8 ft. of water. A gas spring secures the penetrating fiberglass spike, ensuring reliable and steadfast stability even through wake turbulence. Built with a corrosion-resistant powder-coated aluminum finish, this anchor withstands the elements season after season.What's in the Box: Vector Shallow Water Anchor white Mounting Hardware

Read more less

Support System Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Self Supporting 9/16 Smoke Grey 10.6 5/16 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Cut-Out Length X1 (in) Cut-Out Width Y1 (in) Cut-Out Radii R1 (in) 20 3/16 20 3/16 1 2 7/8 17 3/8 17 3/8 1 11/16 Mounting Instructions Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use M6 (1/4 in). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA.

Read more less

Both the 3-Button Windlass Remote Kit and the 5-Button Windlass & Thruster Kit are easily retrofitted to existing installations and include a replaceable battery. The fobs float and are waterproof to IP67 (1 Meter deep). Using over one billion individual codes, our proprietry encryption scheme prevents false triggering from any other device or similar fob. And both kits include a Receiver that supports up to eight remote key fobs (additional fobs sold separately). Allows wireless remote operation (up/Down) of any solenoid switched windlass. FCC & CE certified Kit includes one wireless fob and one receiver Notes: Most Lewmar products utilize solenoids although some of our smaller products may not. If in doubt contact your Lewmar representative.

Read more less

Lewmar's 3-strand rope is an economical choice for your windlass rode. Keep in mind, the windlass does not stow the rode in the anchor locker - gravity does. So make sure you have ample depth and volume in your anchor locker to accommodate the length of rode you have chosen. 3-Strand is typically 20-30% less expensive than premium plaited anchor line. 3-Strand line, when used in salt water, will stiffen over time. It can be soaked in a bucket of fresh water and fabric softener overnight (the longer the better) to bring back a more flexible condition. If this does not yield acceptable results, it should be replaced.

Read more less

Lewmar 66840045 Emergency Manual Recovery F/H2/3Model: 66840045Available on the H2/H3 as an optional extra, it remains fitted to the unit for user convenience.

Read more less

Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use (M6 / 1/4 in). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA. Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) 1 in Flange Smoke Grey 6.04 3/8 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Length Flat X1 (in) Cut-Out Width Flat Y1 (in) Cut-Out Radii Flat R1 (in) 10 1.2 16 3.16 1 9/16 2 11/16 3/16 8 7/8 7 15/16 13 11/16 1 7/16

Read more less

Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use (M6 / 1/4 in). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA. Flat base hatches cannot be used with Trim kits or Roller shades Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Flat Base Smoke Grey 5.77 3/8 Dimensions <table cellpadding="0 in style="border-collapse: collapse" border="1 in> Length X (in) Width Y (in) Height Z (in) Radii R (in) Hinge Length HX (in) Hinge Width HY (in) Cut-Out Length Flat X1 (in) Cut-Out Width Flat Y1 (in) Cut-Out Radii Flat R1 (in) 12 3/4 12 3/4 1 9/16 2 15/16 3/16 5 7/16 10 1/16 10 1/16 1 9/16

Read more less

Support System Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Self Supporting 9/16 Smoke Grey 8.6 5/16 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Cut-Out Length X1 (in) Cut-Out Width Y1 (in) Cut-Out Radii R1 (in) 15 5/8 20 3/4 1 2 7/8 12 7/8 18 1 11/16 Mounting Instructions Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use M6 (1/4 in). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA.

Read more less

Its unique shank profile and ballasted tip make the Delta anchor self-launching. The low centre of gravity and self-righting geometry ensure that the Delta anchor will set immediately. Consistent and reliable in performance, the Delta anchor has Lloyd's Register Type Approval as a High Holding Power anchor and is specified as the primary anchor used by numerous National Lifeboat organizations. Also available in premium grade Duplex/High Tensile stainless steel. All Delta anchors are "guaranteed for life against breakage". Lloyd's Test Certification is available for individual Delta anchors by arrangement. **Damage by deformation or bending is not covered by this guarantee.

Read more less

185mm x 6mm x 1500mm fiberglass tube for 185tt thrusters.

Read more less

Lewmar's 3-strand rope is an economical choice for your windlass rode. Keep in mind, the windlass does not stow the rode in the anchor locker - gravity does. So make sure you have ample depth and volume in your anchor locker to accommodate the length of rode you have chosen. 3-Strand is typically 20-30% less expensive than premium plaited anchor line. 3-Strand line, when used in salt water, will stiffen over time. It can be soaked in a bucket of fresh water and fabric softener overnight (the longer the better) to bring back a more flexible condition. If this does not yield acceptable results, it should be replaced.

Read more less

V4/V5 Windlass Gypsy #203 Replacement gypsy on Windlass Model V4/V5Features: Rope-chain gypsy Cone clutch for smooth, easy control Manual Free Fall W.A.R.P Drum Robust and reliable drivetrain Manual override (optional) Technical Specifications: Rope Size - 5/8" (16 mm) (3 strand hard lay up) Chain Size - 3/8" (10 mm) ( Campbell S3, Lewmar 9.5mm G40) *Sold as an Individual 

Read more less

Lewmar USA Premium 8-Plaited Nylon Anchor Rope 8-Plaited nylon rope eliminates some of the service problems associated with the 3-strand ropes. 8-Plait uses 8-individual braided strands woven together that allow the rope to be relaxed. But, when under load, it tightens up to a firm lay. The higher the load the harder the lay becomes. 8-Plait carries the same tensile strength as 3-Strand. 8-Plait does not coil or create a "birds nest" in the locker like 3-Strand will. 8-Plait flakes and falls upon itself. 8-Plait will not twist and knot up. 8-Plait will not loop over onto itself. 8-Plait has less stretch so it will not bury itself deep into the gypsy's grip when overloaded, which means less damage to the stripper when the windlass is abused or overloaded. 8-Plait pays off of the windlass into the locker much like chain, allowing for better use of smaller locker designs. 8-Plait is 80% less prone to becoming stiff when used in salt water than 3-Strand. 8-Plait nylon rope is 1/3 more absorbent than 3-Strand rope. More absorbent means more weight; more weight means better fall into the anchor locker. 8-Plait should be soaked in water (salt or fresh - it does not matter) to pre-lubricate the rope so it can be used in the windlass initially. When rope is used dry and new, we have seen either slippage or sticking in the rope pocket of the gypsy. Once the rope is wet and used, it out performs the 3-Strand. The longer it is used the better it gets.

Read more less

DTX Anchor - Stainless Steel - 14lbThe DTX anchor fills the gap between the existing galvanized and stainless Delta® anchors.Made from 316 stainless steel, the DTX anchors feature exceptional anti-corrosion performance and the enhanced aesthetics that stainless anchors offer. Utilizing lead ballast encapsulated within the tip of the anchor to achieve the perfect center of gravity, the DTX offers the initial bite and holding reliability that users of our Delta® anchors have come to expect.Features: Self-launching Ordinary holding power  Lead-ballasted tip for fast setting Technical Specifications: Material - Stainless Steel Recommended Chain Size - 1/4" Weight - 14lb (6kg) In the Box: Anchor Instruction manual *Sold as an Individual Specifications: Color: Stainless Construction: Stainless Steel Weight (lbs): 14 Box Dimensions: 10"H x 10"W x 18"L WT: 20 lbs Brochure (pdf)

Read more less

Support System Lower Frame (in) Acrylic Colour Hatch Weight (lb) Acrylic Window Thickness (in) Self Supporting 9/16 Smoke Grey 5.5 5/16 Dimensions Length X (in) Width Y (in) Height Z (in) Radii R (in) Cut-Out Length X1 (in) Cut-Out Width Y1 (in) Cut-Out Radii R1 (in) 9 11/16 19 5/16 1 2 7/8 6 15/16 16 9/16 1 11/16 Mounting Instructions Fit to a flat surface with a maximum tolerance of +/- 1mm. Fastening size at hinge section use M6 (1/4 in). Fastening size for lower frame use 5mm CSK screw No.10 UNC 2 BA.

Read more less

Anchor Rode 15’ 5/16” G4 Chain with 150’ 5/8” Rope with ShackleAn anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation.*A shackle is included for a secure and convenient anchor attachment pointFeatures: High-strength, welded chain rated to high-test G4 specs  Hot-dip-galvanized chain links to minimize corrosion Calibrated for an even pitch Smooth rope-to-chain transition for seamless windlass operation Treated, windlass-grade, 5/8" 8-plait rope Fitted to all Lewmar windlasses and rope chain gypsies Works With:Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlassesSpecifications: Rope: 150 ft. 5/8" 8-plait rope Chain: 15 ft. 5/16” G4 chain Specifications: Chain - Diameter (Inches): 5/16" Chain - Length (Feet): 15' Rope Diameter (Inches): 5/8" Rope Length (Feet): 150' Box Dimensions: 13"H x 13"W x 13"L WT: 31.65 lbs UPC: 743683410970

Read more less

Lewmar 14lb DTX Stainless Steel Anchor Model: 0057206 Manufactured from 316 stainless steel Self launching Ordinary Holding Power certified Guaranteed for 3 years against breakage The new DTX anchor fills the gap between the existing galvanised and stainless Delta(R) anchors, allowing boat owners and builders to specify a stainless steel anchor for a significantly reduced outlay. Made from 316 stainless steel, the DTX anchors feature exceptional anti-corrosional performance and the enhanced aesthetics that stainless anchors offer. Utilising lead ballast encapsulated within the tip of the anchor to achieve the perfect centre of gravity, the DTX offers the initial bite and holding reliability that users of our Delta(R) anchors have come to expect.

Read more less

Lewmar HM15H150PX Anchor Rode 15 feet 5/16 G4 Chain with 150 feet 5/8 in 8 Plait LineModel: HM15H150PX8-Plaited nylon rope eliminates some of the service problems associated with the 3-strand ropes. 8-Plait uses 8-individual braided strands woven together that allow the rope to be relaxed. But

Read more less

Both the 3-Button Windlass Remote Kit and the 5-Button Windlass & Thruster Kit are easily retrofitted to existing installations and include a replaceable battery. The fobs float and are waterproof to IP67 (1 Meter deep). Using over one billion individual codes, our proprietry encryption scheme prevents false triggering from any other device or similar fob. And both kits include a Receiver that supports up to eight remote key fobs (additional fobs sold separately). Allows wireless remote operation (up/Down) of any solenoid switched windlass. FCC & CE certified Kit includes one wireless fob and one receiver Notes: Most Lewmar products utilize solenoids although some of our smaller products may not. If in doubt contact your Lewmar representative.

Read more less

Anchor Rode 15’ 5/16” G4 Chain with 150’ 9/16” RopeAn anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation.Features: High-strength, welded chain rated to high-test G4 specs  Hot-dip-galvanized chain links to minimize corrosion Calibrated for an even pitch Smooth rope-to-chain transition for seamless windlass operation Treated, windlass-grade, 3-strand, twisted nylon rope Fitted to all Lewmar windlasses and rope chain gypsies Works With:Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlassesSpecifications: Rope: 150 ft. 9/16 in. 3-strand nylon  Chain: 15 ft. 5/16” G4 chain Specifications: Chain - Diameter (Inches): 5/16" Chain - Length (Feet): 15' Rope Diameter (Inches): 9/16" Rope Length (Feet): 150' Rope Type: 3-Strand Nylon Box Dimensions: 12"H x 12"W x 12"L WT: 27.65 lbs UPC: 743683406256

Read more less

Lewmar 7LB LFX Anchoring Kitwith 10 feet G4 1/4 Chain 150 feet 1/2 in 8-Plait LineModel: 0058103Made from lightweight and strong

Read more less

Anchor Rode 215'-15' of 1/4" Chain & 200' of 1/2" Rope with ShackleThis Lewmar 215' anchor rode kit features 15 feet' of windlass chain spliced to 200' of 3-strand line and comes with a D shackle.Technical Specifications: Total Length - 215' Chain Length - 15' Chain Size - 1/4" Chain Type - G4 Rope Length - 200' Rope Size - 1/2" Rope Type - 3 Strand Shackle - 5/16" D *Sold as an Individual Specifications: Chain - Diameter (Inches): 1/4" Chain - Length (Feet): 15' Rope Diameter (Inches): 1/2" Rope Length (Feet): 200' Rope Type: 3-Strand Nylon Box Dimensions: 8"H x 8"W x 18"L WT: 20 lbs UPC: 743683406430

Read more less

Lewmar USA Premium 8-Plaited Nylon Anchor Rope 8-Plaited nylon rope eliminates some of the service problems associated with the 3-strand ropes. 8-Plait uses 8-individual braided strands woven together that allow the rope to be relaxed. But, when under load, it tightens up to a firm lay. The higher the load the harder the lay becomes. 8-Plait carries the same tensile strength as 3-Strand. 8-Plait does not coil or create a "birds nest" in the locker like 3-Strand will. 8-Plait flakes and falls upon itself. 8-Plait will not twist and knot up. 8-Plait will not loop over onto itself. 8-Plait has less stretch so it will not bury itself deep into the gypsy's grip when overloaded, which means less damage to the stripper when the windlass is abused or overloaded. 8-Plait pays off of the windlass into the locker much like chain, allowing for better use of smaller locker designs. 8-Plait is 80% less prone to becoming stiff when used in salt water than 3-Strand. 8-Plait nylon rope is 1/3 more absorbent than 3-Strand rope. More absorbent means more weight; more weight means better fall into the anchor locker. 8-Plait should be soaked in water (salt or fresh - it does not matter) to pre-lubricate the rope so it can be used in the windlass initially. When rope is used dry and new, we have seen either slippage or sticking in the rope pocket of the gypsy. Once the rope is wet and used, it out performs the 3-Strand. The longer it is used the better it gets.

Read more less

V2 & V3 Gypsy Stripper Kit 003This is designed as a replacement gypsy for Lewmar's V1 and V2 windlasses.Features: Line Size: 5/8 in. / 16 mm Line Type: 3-strand line

Read more less

V1/V2/V3 Gypsy and Stripper Kit (No. 002)Replacement gypsy and stripper for Lewmar V1, V2 and V3 windlasses and the obsolete model Concept 1 windlass. Compatible With: V1, V2, V3 and Concept 1 windlassesTechnical Specifications: Rope Size - 1/2" to 5/8 (13 to 15.8 mm) (3 strand) Chain Size - 5/16" (7.94 mm) (G4) *Sold as an Individual 

Read more less