FREE SHIPPING ON ORDERS OVER $100.00 Dollars!

  • Perko Medium Prefocus Socket [0895]

    Perko Perko Medium Prefocus Socket [0895]

    Medium Prefocus SocketReplacement Socket for 0800 Series and 1900 Series Solar-Ray® Searchlights.Specifications:Socket Code: E

    $129.99

  • Perko Threaded Collar Pole Light Mounting Base - 2 Pin - Stainless Steel [1048P0SDP]

    Perko Perko Threaded Collar Pole Light Mounting Base - 2 Pin - Stainless Steel [1048P0SDP]

    Threaded Collar Pole Light Mounting Base(2 Pin) - Plug-In Type Base5° RakeConstructionStainless Steel Black Plastic Waterproof snap-on cover Pigtail LeadsFits Figs. 1343, 1348, 1451, 1470, 1622 and 1656 SeriesAll-Round Pole Lights Quick Guide (pdf)

    $35.99

  • OceanLED OceanConnect Junction Box [013204]

    OceanLED OceanLED OceanConnect Junction Box [013204]

    OceanConnect Junction BoxThe OceanConnect is a waterproof (IP66) DMX-controlled, low-voltage DC (9–32V) junction box.The OceanConnect provides one power unit and four individually switched fused power outputs (6 amps per output) to connect DC-powered lights or other DC-switched units. The unit also supports powering and individual addressing of up to four DMX-controlled OceanLED X-Series lights. Contents: 1x OceanConnect unit, including 4x 7.5A blade fuses 4x mounting screws 1x twin entry cable grommet 4x blanking plugs Specifications: Voltage: 12/24V DC (max 32V DC) Input/Output Cable Glands: 1x M20-Power In, 4x M16 - DMX In/Out, and Lights Out Power Input Terminals Wire Gauge: 8-20 AWG DMX In/Out, and Lights Out Terminals Wire Gauge: 12-28 AWG Light Outputs: DMX & Power- 4 x individual fused 6 Amp each max DMX Input: 1x DMX Input (to connect the DMX controller) DMX Output: 1x DMX Output (to link junction boxes in the chain) DMX Terminator: Onboard DMX terminator with an on/off switch Physical Specifications Dimensions (Including Cable Glands): 228mm x 174mm x 60mm (9" x 6.8" x 2.3") Enclosure: IP66-robust polycarbonate Weight: 270g

    $342.00

  • Hella Marine Apelo Light Controller [285814001]

    Hella Marine Hella Marine Apelo Light Controller [285814001]

    Apelo Light ControllerControl, Group, and Create personalised dynamic RGB/W lighting experiences with the Apelo Light Controller. Configure any Apelo Ecosystem RGB lamp or light via the Apelo Light Controller App and/or multi-pole switching.Elevate your lighting experience with the Hella Marine Apelo Light Controller. Vibrant, dynamic, synchronized colors will transform your space into a stunning visual display.The Apelo Light Controller App lets you personalise your lighting configuration with ease. Download the Apelo App and pair Apelo RGB Step lamps, Apelo EuroLED 75 RGB/W Downlights, and Apelo Underwater Lights to the controller to enhance your lighting experience. Also compatible with universal RGB products such as rope lighting.Customizable LightingPersonalize your lighting with the Apelo Light Controller App and unlock endless color possibilities. Easily create custom lighting or switch between preset modes, combining convenience and creativity in every use.Effortless ControlSeamlessly move between a multi-pole switch and the intuitive Apelo App to control your lighting. Bluetooth mesh technology allows seamless integration of multiple devices without having to connect them together.Mesh CommunicationNo wiring required for controller integration – the units communicate wirelessly. Once paired, instructions are seamlessly transmitted between controllers via over-the-air communication.Specifications: UV Resistant IP67 Completely Sealed 12V/24V RGB/W 3-Year Warranty Quick Guide (pdf)Owner's Manual (pdf)

    $138.99

  • Navisafe Navimount Horizontal Black w/Screws [953-1]

    Navisafe Navisafe Navimount Horizontal Black w/Screws [953-1]

    Navimount Horizontal Black with ScrewsThe Navimount Horizontal is designed to attach the Navimount Pole or the Navilights with Navimount base (model 040, 340) to horizontal surfaces - e.g. the boat deck or cabin roof.Includes: Horizontal Mount Two self tapping stainless steel screws Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 814154018978

    $11.99

  • Attwood LightArmor Plug-In Base - 2 Pin - Stainless Steel - Round [910R2PSB-7] Attwood LightArmor Plug-In Base - 2 Pin - Stainless Steel - Round [910R2PSB-7]

    Attwood Marine Attwood LightArmor Plug-In Base - 2 Pin - Stainless Steel - Round [910R2PSB-7]

    LightArmor Plug-In Base - 2 Pin - Stainless Steel - RoundINTRODUCING LIGHTARMOR PLUG-IN BASES, a new line of light bases designed for premium performance, styling, and durability. Across the entire product line, you get the intelligent engineering that LightArmor is known for.A Sure FitThe new Light Armor Plug-In Light Bases have a threaded design feature that fits perfectly with the threaded locking collar now offered across the entire line of Attwood Pole Lights. This unique system ensures a tight and secure fit that prevents annoying rattling while underway or traileringKey Features: Threaded Locking System for a secure fit Unique cover design Stays secure while underway or trailered Low-profile prevents water from pooling on top surface WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $19.99

  • Golight Snap-On Rockguard Lens Cover f/GT Series Halogen Lights - Black [15307]

    Golight Golight Snap-On Rockguard Lens Cover f/GT Series Halogen Lights - Black [15307]

    Snap-On Rockguard Lens Cover for GT Series Halogen Lights - BlackSnap-on Rockguard lens cover for halogen units. This is not a universal part. Please verify the model number listed before ordering.Compatible With Current Golight GT Models:  2000GT 2051GT 2020GT 2021GT 2007GT 2057GT 7901GT 7951GT 7900GT Previous Golight/Radioray Models: 2000 2051 2020 2021 2007 2057 7901 7951 7900 5149

    $10.99

  • Perko Locking Collar Pole Light Mounting Base - 2 Pin - Round - Stainless Steel [1045P0SDP]

    Perko Perko Locking Collar Pole Light Mounting Base - 2 Pin - Round - Stainless Steel [1045P0SDP]

    Locking Collar Pole Light Mounting Base(2 Pin) - Plug-In Type BaseConstruction Stainless Steel Black Plastic Waterproof Snap-On Cover Pigtail Leads Fits Figs. 1343, 1347, 1348, 1400, 1440, 1450, 1451, 1452, 1460, 1470 Series All-Round Pole Lights and 1612 Series Bi-Color Pole Lights Quick Guide (pdf)

    $35.99

  • HEISE Accent Light Cover [HE-ML1DIV]

    HEISE LED Lighting Systems HEISE Accent Light Cover [HE-ML1DIV]

    Accent Light CoverThis Accent Lighting Cover fits over accent lights (HE-ML1 and assorted colors – HE-4MLRGBK/ HE-8MLRGBK ) and can be positioned to divert light down for accent lighting or can be used to diffuse the strength of the lights when direct lighting is not needed.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $8.99

  • Perko Locking Collar Pole Light Mounting Base - 2 Pin - Chrome Plated w/Black Cover [1060PB0DP]

    Perko Perko Locking Collar Pole Light Mounting Base - 2 Pin - Chrome Plated w/Black Cover [1060PB0DP]

    Locking Collar Pole Light Mounting Base(2 Pin) - Plug-In Type Base5° RakeConstructionChrome Plated Zinc Alloy Black Plastic Waterproof snap-on cover Pigtail LeadsFits Figs. 1343, 1348, 1400, 1445, 1451, 1455, 1456, 1465 and 1470 Series All-Round Pole Lights Quick Guide (pdf)

    $34.99

  • Lumitec Kraken Command Center [101638]

    Lumitec Lumitec Kraken Command Center [101638]

    Kraken Command CenterKraken Command Center -  Includes 480W power converter and Poco Module.

    $2,247.99

  • Golight Snap-On Rockguard Lens Cover f/GT  ST Series LED Lights - Black [15310]

    Golight Golight Snap-On Rockguard Lens Cover f/GT ST Series LED Lights - Black [15310]

    Snap-On Rockguard Lens Cover for GT & ST Series LED Lights - BlackSnap-on Rockguard lens cover for halogen units. This is not a universal part. Please verify the model number listed before ordering. Compatible With Current Golight GT & ST Models:  20004GT 20514GT 20204GT 20214GT 20074GT 20574GT 79014GT 79514GT 79004GT 51494 30004ST 30514ST 30064ST 30204ST 30214ST 30264ST 30005ST 30515ST 30065ST Previous Golight/Radioray & Stryker Models: 20004 20514 20204 20214 20074 20574 79014 79514 79004 30004 30514 30064 30204 30214 30264 30005 30515 30065

    $10.99

  • Golight Wireless Dash Mounted Remote [30200]

    Golight Golight Wireless Dash Mounted Remote [30200]

    Wireless Dash Mount RemoteOptional wireless dash mount remote compatable with all wireless lights in the Golight, RadioRay, Stryker, and Gobee models.Remote cannot be added to lights that came standard with only "wired" remotes.

    $72.99

  • Lunasea 4.5" Nav Light Riser f/LL53 Nav Fixture Series [LLB-53R4-01-00]

    Lunasea Lighting Lunasea 4.5" Nav Light Riser f/LL53 Nav Fixture Series [LLB-53R4-01-00]

    4.5" Nav Light Riser for LL53 Nav Fixture SeriesRaises navigation light for better detection. Made of pure aluminum, anodized black.Features: Increases height 4.5 inches Cable routes through bottom or side LL53 fixture can mount 0° or 90° on top

    $50.99

  • RIGID Industries Lighted Rocker Switch [40191]

    RIGID Industries RIGID Industries Lighted Rocker Switch [40191]

    Lighted Rocker SwitchThis Switch features a lighted rocker with protective rubber boot and is a great addition to any RIGID Industries lighting system. This switch will fit all RIGID Industries wiring harnesses. This product requires a 3/4" hole to mount.Features: Lighted for Better Visibility Water Resistant Protective Rubber Boot Works with All RIGID Industries Wiring Harnesses

    $16.99

  • TACO Wedge Plate f/GS-800  GS-900 [WP-800-900]

    TACO Marine TACO Wedge Plate f/GS-800 GS-900 [WP-800-900]

    Wedge Plate for GS-800 & GS-900In case your T-top has a slight curve, keep the appearance of your Grand Slam 800 VHF Antenna Mount and Grand Slam 900 Masthead Anchor Light clean by mounting them perfectly straight with our plastic wedge plates. Features & Benefits: Corrects the angle of GS-800 and GS-900 to perpendicular to the T-top  Fits Grand Slam 800 VHF Antenna Mount and Grand Slam 900 Masthead Anchor Light No drilling Sold individually 1-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Wedges Box Dimensions: 1"H x 4"W x 4"L WT: 0.25 lbs UPC: 631115091111

    $36.99

  • Shadow-Caster Downlight - White Housing - Bimini Blue [SCM-DLXS-BB-WH] Shadow-Caster Downlight - White Housing - Bimini Blue [SCM-DLXS-BB-WH]

    Shadow-Caster LED Lighting Shadow-Caster Downlight - White Housing - Bimini Blue [SCM-DLXS-BB-WH]

    Downlight - White Housing - Bimini BlueThis Shadow-Caster™ large marine LED downlight is bimini blue and is perfect for lighting overhead areas of the interior and exterior of your boat or yacht. At 3" overall diameter, its wide-angle spread of light and all-glass reveal make this the ideal light for T-Tops, cabins, towers, and more.Features: LED color is bimini blue  120-degree viewing angle High-efficiency switch mode power supply Waterproof low-profile aluminum housing All-Glass reveal provides a modern look White finish Durable glass lens 3-Year Warranty Specifications:120-degree beam angle 3-watt power draw 10-30 volts input 250mA at 12 volts, 125mA at 24 volts 6000 Kelvin cool white color temperature 3000 Kelvin warm white color temperature 3 in. (76mm) OD, 0.175 in. (4mm) mounting height 2 in. (51mm) mounting hole IP67 waterproof design 18 in. (45cm) lead wire Includes: Down light Flush mounting bracket (3) #4 X 0.5 in. (12.7mm) SS316PH screws Specifications: Type: Lights Box Dimensions: 3"H x 4"W x 4"L WT: 0.25 lbs UPC: 850024342866 Quick Guide (pdf)

    $69.99

  • RIGID Industries E-Series Lens Cover 6" - Yellow [106933]

    RIGID Industries RIGID Industries E-Series Lens Cover 6" - Yellow [106933]

    E-Series Lens Cover 6" - YellowRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

    $18.99

  • RIGID Industries SR-Q Series Lens Cover - Yellow [311933]

    RIGID Industries RIGID Industries SR-Q Series Lens Cover - Yellow [311933]

    SR-Q Series Lens Cover - YellowRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

    $15.99

  • RIGID Industries Adapt Lens Cover 10" - Black [11001]

    RIGID Industries RIGID Industries Adapt Lens Cover 10" - Black [11001]

    Adapt Lens Cover 10" - BlackThese ADAPT Light Covers from RIGID are the perfect solution for style and function. With multiple color options, you can give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your ADAPT light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

    $24.99

  • Rod Saver Light Saver [LS]

    Rod Saver Rod Saver Light Saver [LS]

    Light SaverA convenient way to hold your running lights. 2 straps with the foam inserts create a tie-down system that can be mounted anywhere and keep your running lights secure.

    $13.99

  • Navisafe Navimount Vertical White w/Screws [950-1]

    Navisafe Navisafe Navimount Vertical White w/Screws [950-1]

    Navimount Vertical White with ScrewsIncludes:2 self-tapping stainless steel screwsUse #960 converter for #001, 010, 305 and 341 lights. #950 replaces old #526  Specifications: Housing: White Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 7332640013922

    $11.99

  • Perko Threaded Collar Pole Light Mounting Base - 2 Pin - Chrome Plated [1048P00DP]

    Perko Perko Threaded Collar Pole Light Mounting Base - 2 Pin - Chrome Plated [1048P00DP]

    Threaded Collar Pole Light Mounting Base(2 Pin) - Plug-In Type Base5° RakeConstructionChrome Plated Brass Black Plastic Waterproof snap-on cover Pigtail LeadsFits Figs. 1343, 1348, 1451, 1470, 1622 and 1656 SeriesAll-Round Pole Lights Quick Guide (pdf)

    $40.99

  • Marinco SPLR-3 Spot Light Bridge Mount Hard Wired Remote [SPLR-3]

    Marinco Marinco SPLR-3 Spot Light Bridge Mount Hard Wired Remote [SPLR-3]

    Wired Bridge RemotePower: 12 or 24 Volt (Hard Wired)Current draw (idle / in use):negligibleDimensions: 3.5"W x 2.25"H x .75"D (88 x 57 x 19 mm)Weight:2.12 oz (60g)Housing material: UV resistant PC/ASAButton material: Silicone (glow in the dark)Operating temp range: 5°F - 113°F (-15°C - 45°C) IP Rating: IP54WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

    $48.99

  • Scandvik 8" LED Light Strip - White w/Gasket - 12V [41644P] Scandvik 8" LED Light Strip - White w/Gasket - 12V [41644P]

    Scandvik Scandvik 8" LED Light Strip - White w/Gasket - 12V [41644P]

    8" LED Light Strip - White with Gasket - 12VThis is a multi-use 8" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companionways, or for step illumination.Features: 12VDC, 3W 15 EA 2835 LEDs Daylight white (4500K) IP67 Specifications:Lumens: 176*The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 2"W x 9"L WT: 0.1 lbs UPC: 786142416441

    $14.99

  • ACR Dash Mount Point Pad Controller f/RCL-95 Searchlight [9637] ACR Dash Mount Point Pad Controller f/RCL-95 Searchlight [9637]

    ACR Electronics ACR Dash Mount Point Pad Controller f/RCL-95 Searchlight [9637]

    Dash Mount Point Pad™Controller for RCL-95 Searchlight Add a surface mounted a 2nd searchlight controller with ACR's Dash Mount Point Pad™.  Surface mounted and allows you to turn the searchlight on and off, change the rotation speed between high and low, and rotate the searchlight left and right, and to raise and lower the searchlight beam. *Does not include extension cable*Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 5"H x 6"W x 7"L WT: 1.35 lbs UPC: 791659096376 Owner's Manual (pdf)

    $103.99

  • ACR URP-102 Point Pad Kit f/ACR Searchlights [9282.3]

    ACR Electronics ACR URP-102 Point Pad Kit f/ACR Searchlights [9282.3]

    URP-102 Point Pad™ Kit for ACR Searchlights Control an ACR spotlight from any place on a vessel with fingertip control and accuracy  This controller can be surface or flush mounted.In the Box: Point Pad™ URP-102 remote  Flush and surface mount case Gaskets (surface and Flush) Splitter F-Connectors Coaxial cable - 15' *Sold as an IndividualWARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $213.99

  • Lumitec Poco 4 Digital Light Control Module [101925]

    Lumitec Lumitec Poco 4 Digital Light Control Module [101925]

    Poco™ 4 Digital Light Control ModulePoco Digital Lighting Control delivers powerful, low-cost, on-board lighting control through a compatible MFD or connected smart device in a simple, easy-to-install control module.Poco 4 is the latest iteration of the award-winning Poco system and introduces innovative features such as intelligent sound-to-light, NMEA 2000 compatibility, and CAN bus integration. When installed with Lumitec’s PLIenabled lights, even more functionality is unleashed – precise control over color selection and intensity, custom lighting scene creation with interactive sound-to-light, and the ability to add ‘virtual circuits’ on a single channel, allowing aftermarket installers to add lights and improve on-board lighting designs without adding any additional wire runs.Specifications: Power Line Instruction IP Rated 3-Year Warranty *The Poco Digital Control Module can be controlled through a compatible MFD or connected smart device (not included).

    $405.99

  • Black Oak Dimmer Controller [DIM]

    Black Oak LED Black Oak Dimmer Controller [DIM]

    Dimmer ControllerMaybe Black Oak's lights are too bright? This dimmer module allows users to dim the LEDs down to 25%, 50%, and 75%. With the handheld remote control, users can easily turn the light on/off and dim it to a preferred brightness. Note that the dimmer module must be wired in between the relay and light to get full range of function.Specifications: Product Dimensions (L x W x H): 5” x 1.5” x 1.25” Input/Output Voltage: 12-24V Max Output Current: 25 Amps Controller Battery: CR2025-CR2032 In the Box: Dimmer module Wireless controller Specifications: Type: Parts Box Dimensions: 2"H x 3"W x 6"L WT: 0.45 lbs UPC: 850044517329

    $52.70

  • Propspeed Lightspeed Light Foul-Release Coating Covers Approximately 4 Lights Underwater Lights [LSKIT]

    Propspeed Propspeed Lightspeed Light Foul-Release Coating Covers Approximately 4 Lights Underwater Lights [LSKIT]

    Lightspeed Light Foul-Release Coating Covers Approximately 4 Lights Underwater LightsMore Light. Less Fuss. Keep your lights shining bright all season long. Underwater lights are just as susceptible to marine fouling as any other underwater surface which can result in reduced visible light, and efforts to remove barnacles can result in damaged lighting components. Lightspeed is a transparent coating that is an easy and affordable way for boat owners to reduce maintenance, protect their investment, and maintain lighting system performance. Lightspeed has been shown to save three times its retail value in maintenance costs, on top of the unquantifiable damage to marine ecosystems caused by traditional antifouling products. Features: Lightspeed is a transparent coating that is an easy and affordable way for boat owners to reduce maintenance, protect their investment, and maintain lighting system performance Don’t risk damage to delicate components caused by scraping away hard marine growth Lightspeed also promises worry-free 12-24 months with reduced maintenance Lightspeed protects your aesthetic features, while not interfering with the light transmittance Endorsed and tested by Lumishore to ensure there is no drop in lumen output, no shift in color nor adverse effects on the lighting system performance Technical Specifications:Coverage Rate - 1ft² (four (4) average size underwater lights)In the Box: Lightclean wipe Application brush Lightspeed Clear Coat - 15ml *Sold as an Individual

    $31.99

  • RIGID Industries E-Series Lens Cover 6" - Black [106913]

    RIGID Industries RIGID Industries E-Series Lens Cover 6" - Black [106913]

    E-Series Lens Cover 6" - BlackRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

    $18.99

  • Navisafe Navimount RIB Self-Adhesive Mount f/Inflatable - Black [955-1]

    Navisafe Navisafe Navimount RIB Self-Adhesive Mount f/Inflatable - Black [955-1]

    Navimount RIB Self-Adhesive Mount for Inflatable - BlackFeatures: The Navimount RIB is designed to securely attach the Navilights with Magnetic base, Navimount base or Suction base to the tube of inflatable boats. Navilight models 001, 010, 040, 305, 340 require in addition the Navisafe converter Navimount / 960 Navilight models 041 and 341 do not require additional converters and can be mounted directly Includes:"3M" self-adhesive sticker working on boats made from Hypalon, Polyethylene or PVC. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 4"W x 7"L WT: 0.4 lbs UPC: 814154018985

    $18.99

  • ACR Wireless Dash Mount Remote f/RCL85  RCL95 Searchlight [9635]

    ACR Electronics ACR Wireless Dash Mount Remote f/RCL85 RCL95 Searchlight [9635]

    Wireless Dash Mount Remote for RCL85 & RCL95 SearchlightBlack Dash Mount Wireless Remote for RCL85 & RCL95 Searchlights. Enjoy the convenience of controlling your RCL85 or RCL95 searchlight with the Wireless Dash Mount Remote. The compact form factor and the sleek design of this remote ensure a visually appealing look when the remote is dash-mounted. It operates on the 433.92 MHz frequency and offers an impressive remote operation distance of 213' (65M).Features: Sleek design and compact form factor Impressive remote operation distance of 213' (65M) Allows for directional control and provides the ability to switch rotation/tilt speed between fast and slow The simple searchlight sync process Sync up to 4 remotes with one searchlight USCG Approved FCC CE Specifications: Dimensions: 3.98" L x 2.36" W x 0.71" H Housing Color: Black Mount Type: Dash Mount

    $64.99

  • Perko Double Contact Bayonet Socket - Black Polymer w/10" Pigtail [0024DP1]

    Perko Perko Double Contact Bayonet Socket - Black Polymer w/10" Pigtail [0024DP1]

    Double Contact Bayonet Socket - Black Polymer w/10" PigtailFeatures: Black Polymer Body 10" Pigtail

    $9.99

  • ACR Standard Wireless Remote f/ACR Searchlights [9636]

    ACR Electronics ACR Standard Wireless Remote f/ACR Searchlights [9636]

    Standard Wireless Remote for ACR Searchlights Enjoy the convenience of controlling your RCL-85 or RCL-95 searchlight with either the Wireless Handheld Remote.  The remote is waterproof, fits comfortably in your hand, and enables simple intuitive control of your searchlight.  It operates on the 433.92 MHz frequency and offers an impressive remote operation distance of 213' (65 m).In addition to directional control of the searchlight, the remote also allows users to turn the searchlight strobe function on and off.  Syncing the remote to your searchlight is a simple process and up to a total of 4 remotes (handheld wireless remotes and/or dash mount wireless remotes) can be synced to one searchlight.Compatible With:ACR RCL-85 adn RCL-95 model searchlightsFeatures: Compact and water-resistant  Operation distance of 213' (65 m) Allows for directional control and on/off functionality  Sync up to 4 remotes with a single searchlight *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

    $66.99

  • Forespar Mast Light Guard [132200]

    Forespar Performance Products Forespar Mast Light Guard [132200]

    Mast Light GuardKeeps lines from snagging while protecting fittings.Features: Height - 6 1/2 inches Width - 5 inches Length - 6 inches

    $55.99

  • RIGID Industries D-XL Series Cover - Yellow [321933]

    RIGID Industries RIGID Industries D-XL Series Cover - Yellow [321933]

    D-XL Series Cover - YellowRIGID light covers are the perfect solution for style and function.  Give your vehicle a unique look while also protecting your investment.  These light covers are made from durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light.  These covers snap on and off, so swapping them out is simple and easy.  They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection It Fits D-XL Series and Radiance XL series lights Dimensions - 4" x 4" *Sold as an Individual Specifications: Type: Covers Box Dimensions: 1"H x 7"W x 9"L WT: 0.1 lbs UPC: 849774026485

    $18.99

  • Marinco Replacement Joystick Control Switch f/ M-100 Spotlights [22209]

    Marinco Marinco Replacement Joystick Control Switch f/ M-100 Spotlights [22209]

    Replacement Joystick Control for 22200 and 22201 M-100 Halogen SpotlightsThe replacement joystick control is for specific use with the 22200 and 22201 M-100 spotlights. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    $75.99

  • Scandvik 8" Scan-Strip 4 Color LED Light - RGBW [41650P] Scandvik 8" Scan-Strip 4 Color LED Light - RGBW [41650P]

    Scandvik Scandvik 8" Scan-Strip 4 Color LED Light - RGBW [41650P]

    8" Scan-Strip 4 Color LED Light - RGBWThis 4-color scan-strip RGBW LED builds on the popularity of the original single-color scan-strip LED. Simple 2-wire connections with any on/off switch are all that is required to cycle from white to blue to red to green.Features: Switching off for more than 4 seconds resets the color to white RGBW LEDs Colors are daylight white (4000-4500K), blue, red, green Lifespan 30,000+ Hours 12/24 Volt IP65 can be installed in engine rooms and exterior locations Ideal for under-gunwale lighting SS Mounting Screws Included Specifications: Beam Angle: 120°  Watts: 1.2 Lumens: 94 Dimensions (L X W x H) (inch): 8-7/8" x 7/8" x 1/2" *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 4"W x 10"L WT: 0.15 lbs UPC: 786142416502

    $21.99

  • Scandvik 4" LED Light Strip - White w/Gasket - 12V [41640P] Scandvik 4" LED Light Strip - White w/Gasket - 12V [41640P]

    Scandvik Scandvik 4" LED Light Strip - White w/Gasket - 12V [41640P]

    4" LED Light Strip - White with Gasket - 12VThis is a multi-use 4" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companion ways, or for step illumination.Features: 12VDC, 1.2W 6 EA 2835 LEDs Daylight white (4500K) IP67 *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 2"W x 5"L WT: 0.05 lbs UPC: 786142416403

    $10.99

  • Scandvik 16" Scan-Strip 4 Color LED Light - RGBW [41651P]

    Scandvik Scandvik 16" Scan-Strip 4 Color LED Light - RGBW [41651P]

    16" Scan-Strip 4 Color LED Light - RGBWThis 4-color scan-strip RGBW LED builds on the popularity of the original single-color scan-strip LED. Simple 2-wire connections with any on/off switch are all that is required to cycle from white to blue to red to green.Features: Switching off for more than 4 seconds resets the color to white RGBW LEDs Colors are daylight white (4000-4500K), blue, red, green Lifespan 30,000+ Hours 12/24 Volt IP65 can be installed in engine rooms and exterior locations Ideal for under-gunwale lighting SS Mounting Screws Included Specifications: Beam Angle: 120°  Watts: 2.4 Lumens: 180 Dimensions (L X W x H) (inch): 16" x 7/8" x 1/2" *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 4"W x 17"L WT: 0.2 lbs UPC: 786142416519

    $33.99

  • RIGID Industries 12V Relay [49012]

    RIGID Industries RIGID Industries 12V Relay [49012]

    12V RelayFeatures:RIGID Industries Relay12V

    $33.99

  • Lunasea Tri/Anchor/Flash Fixture Switch [LLB-53SW-81-00] Lunasea Tri/Anchor/Flash Fixture Switch [LLB-53SW-81-00]

    Lunasea Lighting Lunasea Tri/Anchor/Flash Fixture Switch [LLB-53SW-81-00]

    Tri/Anchor/Flash Fixture SwitchConvenient Switch for Tri Color Nav Fixture. Conveniently shows what the Tri Color Fixture mode is in. Easy to hook up with push connectors.Features: Visual LED indicators Solid Metal Plate Easy Connect push connectors Specifications: Input Voltage: 12 VDC Systems Warranty: 3-Year Specifications: Type: Lights Box Dimensions: 1"H x 7"W x 8"L WT: 0.2 lbs UPC: 850001461535 Brochure (pdf)

    $48.99

  • Attwood Oval 2-Pin Base f/Angled Pole - Black [91022-7]

    Attwood Marine Attwood Oval 2-Pin Base f/Angled Pole - Black [91022-7]

    Oval 2-Pin Base f/Angled Pole - BlackPart #: 91022-7These 2-pin bases for angled pole lights with locking collars are well-suited for rough conditions or long poles. Features a soft rubber cover with a molded-in gasket to protect the socket from moisture and debris when pole light is stowed away. Provides a 2-pin socket and a 7.5 degree angle and installs on narrow gunwales or deck areas. Completely non-corrosive, they feature contacts which are nickel-plated to resist corrosion and multi-crimped for durability, and wire leads tinned for corrosion resistance.Features: Oval 2-Pin Base specifically for angled pole Black WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

    $14.99

  • Black Oak Horizontal Bracket 1" - Individual [HB100]

    Black Oak LED Black Oak Horizontal Bracket 1" - Individual [HB100]

    Horizontal Bracket 1" - IndividualThe horizontal ATV light bar mount is perfect for adding your Black Oak LED pod lights on any circular surface. This mounting point is designed specifically for our LED POD lights which use an 8m bolt. Whether you're mounting lights on a front bumper or roll bar of your UTV, this tube mounting bracket is a perfect solution for a clean and easy install.

    $37.99

  • RIGID Industries D-Series Lens Cover - Black [201913]

    RIGID Industries RIGID Industries D-Series Lens Cover - Black [201913]

    D-Series Lens Cover - BlackRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

    $13.99

  • RIGID Industries D-Series Lens Cover - Yellow [201933]

    RIGID Industries RIGID Industries D-Series Lens Cover - Yellow [201933]

    D-Series Lens Cover - YellowRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

    $13.99

  • RIGID Industries E-Series, RDS-Series  Radiance+ Lens Cover 10" - Yellow [110933]

    RIGID Industries RIGID Industries E-Series, RDS-Series Radiance+ Lens Cover 10" - Yellow [110933]

    E-Series, RDS-Series & Radiance+ Lens Cover 10" - YellowRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

    $20.99

Footer image

© 2025 REBELLION MARINE, Powered by Shopify

    Login

    Forgot your password?

    Don't have an account yet?
    Create account