D-XL Series Cover - YellowRIGID light covers are the perfect solution for style and function.  Give your vehicle a unique look while also protecting your investment.  These light covers are made from durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light.  These covers snap on and off, so swapping them out is simple and easy.  They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection It Fits D-XL Series and Radiance XL series lights Dimensions - 4" x 4" *Sold as an Individual Specifications: Type: Covers Box Dimensions: 1"H x 7"W x 9"L WT: 0.1 lbs UPC: 849774026485

Read more less

Replacement Joystick Control for 22200 and 22201 M-100 Halogen SpotlightsThe replacement joystick control is for specific use with the 22200 and 22201 M-100 spotlights. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

8" Scan-Strip 4 Color LED Light - RGBWThis 4-color scan-strip RGBW LED builds on the popularity of the original single-color scan-strip LED. Simple 2-wire connections with any on/off switch are all that is required to cycle from white to blue to red to green.Features: Switching off for more than 4 seconds resets the color to white RGBW LEDs Colors are daylight white (4000-4500K), blue, red, green Lifespan 30,000+ Hours 12/24 Volt IP65 can be installed in engine rooms and exterior locations Ideal for under-gunwale lighting SS Mounting Screws Included Specifications: Beam Angle: 120°  Watts: 1.2 Lumens: 94 Dimensions (L X W x H) (inch): 8-7/8" x 7/8" x 1/2" *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 4"W x 10"L WT: 0.15 lbs UPC: 786142416502

Read more less

4" LED Light Strip - White with Gasket - 12VThis is a multi-use 4" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companion ways, or for step illumination.Features: 12VDC, 1.2W 6 EA 2835 LEDs Daylight white (4500K) IP67 *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 2"W x 5"L WT: 0.05 lbs UPC: 786142416403

Read more less

Oval 2-Pin Base f/Angled Pole - BlackPart #: 91022-7These 2-pin bases for angled pole lights with locking collars are well-suited for rough conditions or long poles. Features a soft rubber cover with a molded-in gasket to protect the socket from moisture and debris when pole light is stowed away. Provides a 2-pin socket and a 7.5 degree angle and installs on narrow gunwales or deck areas. Completely non-corrosive, they feature contacts which are nickel-plated to resist corrosion and multi-crimped for durability, and wire leads tinned for corrosion resistance.Features: Oval 2-Pin Base specifically for angled pole Black WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Horizontal Bracket 1" - IndividualThe horizontal ATV light bar mount is perfect for adding your Black Oak LED pod lights on any circular surface. This mounting point is designed specifically for our LED POD lights which use an 8m bolt. Whether you're mounting lights on a front bumper or roll bar of your UTV, this tube mounting bracket is a perfect solution for a clean and easy install.

Read more less

D-Series Lens Cover - BlackRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

Read more less

D-Series Lens Cover - YellowRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

Read more less

E-Series, RDS-Series & Radiance+ Lens Cover 10" - YellowRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

Read more less

Mini Mount Plug-In Type Base(1049) Plain Black Cap Insert and Waterproof Snap-On Cover Black Plastic Base Pigtail Leads Cap Type Black# of Pins 2O.D. Base Dims 1-15/16Fits Figs. 1401, 1441, and 1461 Series All-Round Pole Lights and 1614 Series Bi-Color Pole Lights Quick Guide (pdf)

Read more less

Full Spectrum Hub - 2 OutputsOur F-HB-2-FS5 Hub simplifies installation allowing for 2 RGBW fixtures to be connected to one power source. It also allows you to daisy-chain the data signal between those 2 fixtures, as well as between additional fixtures on other hubs.  Features: ABYC Compliant IP68 & IPX8 Tested

Read more less

Single Color Hub - 4 OutputsOur F-HB-4-MC3 Hub simplifies installation allowing for 4 Single Color fixtures to be connected to one power source. It also allows you to daisy-chain the data signal between those 4 fixtures, as well as between additional fixtures on other hubs.  Features: ABYC Compliant IP68 & IPX8 Tested

Read more less

Snap-On Rockguard Lens Cover for GT Series Halogen Lights - WhiteSnap-on Rockguard lens cover for halogen units. This is not a universal part. Please verify the model number listed before ordering.Compatible With Current Golight GT Models:  2000GT 2051GT 2020GT 2021GT 2007GT 2057GT 7901GT 7951GT 7900GT Previous Golight/Radioray Models: 2000 2051 2020 2021 2007 2057 7901 7951 7900 5149

Read more less

Capri3 Retrofit Kit - WhiteWant to upgrade your current Capri lights to the all-new Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.

Read more less

Snap-On Rockguard Lens Cover for ST Series Halogen Lights - WhiteSnap-on Rockguard lens cover for halogen units. This is not a universal part. Please verify the model number listed before ordering. Compatible With Current Stryker ST Models:  3000ST 3051ST 3006ST 3020ST 3021ST 3026ST 30002ST 30512ST 30062ST Previous Stryker Models: 3000 3051 3006 3020 3021 3026 30002 30512 30062

Read more less

Snap-On Rockguard Lens Cover for ST Series Halogen Lights - BlackSnap-on Rockguard lens cover for halogen units. This is not a universal part. Please verify the model number listed before ordering. Compatible With Current Stryker ST Models:  3000ST 3051ST 3006ST 3020ST 3021ST 3026ST 30002ST 30512ST 30062ST Previous Stryker Models: 3000 3051 3006 3020 3021 3026 30002 30512 30062

Read more less

Insta-Clip 2 #95 Lantern Mantle It only takes a few moments to get clear white light with Coleman Insta-Clip 2 #95 Mantles. All you have to do is remove the old mantles, slip the new mantle onto the burner tube and then pull the tab.Features:  Change mantles in seconds with tabbed clip attachment For the following Coleman-fueled lantern models: 2000, 2500, 2555, 2600 Specifications: Weight (lbs): 0.056

Read more less

OLAS Exposure Series Action 9 Docking Station PackThis wall-mounted charging dock employs magnetic charging functionality, enabling the light to be swiftly attached. When used at sea, an additional silicone band securely holds the light in place, ensuring the crew always has access to a fully charged, powerful searchlight in emergencies.The cable can be configured to connect to any standard 5V USB power supply or discreetly integrated through wall mounting, connecting to the vessel's power system (requires a 12/24V to 5V converter). Two 3m adhesive pads are included for quick and secure installation, eliminating the need for structural modifications to the vessel.Key benefits include a quick connect feature as well as a silicone band for secure attachment.In the Box Action1-9 charge dock 2 x 3M adhesive stickers 1 x USB charger lead for Action1-9 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

LightArmor Plug-In Base - 3 Pin - Stainless Steel - RoundINTRODUCING LIGHTARMOR PLUG-IN BASES, a new line of light bases designed for premium performance, styling, and durability. Across the entire product line, you get the intelligent engineering that LightArmor is known for.A Sure FitThe new Light Armor Plug-In Light Bases have a threaded design feature that fits perfectly with the threaded locking collar now offered across the entire line of Attwood Pole Lights. This unique system ensures a tight and secure fit that prevents annoying rattling while underway or traileringKey Features: Threaded Locking System for a secure fit Unique cover design Stays secure while underway or trailered Low-profile prevents water from pooling on top surface WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

LightArmor Plug-In Base - 2 Pin - Black - RoundINTRODUCING LIGHTARMOR PLUG-IN BASES, a new line of light bases designed for premium performance, styling, and durability. Across the entire product line, you get the intelligent engineering that LightArmor is known for.A Sure FitThe new Light Armor Plug-In Light Bases have a threaded design feature that fits perfectly with the threaded locking collar now offered across the entire line of Attwood Pole Lights. This unique system ensures a tight and secure fit that prevents annoying rattling while underway or traileringKey Features: Threaded Locking System for a secure fit Unique cover design Stays secure while underway or trailered Low-profile prevents water from pooling on top surface WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

RGB LED Controller WaterproofFeatures: 10 SPEEDS – 20 MODES Waterproof RGB LED Controller via smartphone APP Use RGB MPS APP to control your infinite colors – 10 speeds – 20 dynamic modes LEDs flash to your music via your smartphone Bluetooth feature Operational voltage: 12-24V DC Maximum Current: 10a APP operating range 60 feet (20m) unobstructed Outputs: (4) Micro DIN Female connectors Fused power and ground wires for easy connection Use with MPS-RGBWWS4 (sold separately) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Replacement Bracket for WL-1 Floating Strobe LED WaterlightFeatures: Replacement Bracket Specifically for WL-1 Floating Strobe LED Waterlight

Read more less

X-Series DMX Junction BoxFor use in-conjunction with OceanLED Colours APP and DMX controller. Allows for up to 4 DMX connections to OceanLED Xtreme Series DMX Colours Lights per Junction Box. Can be linked to further DMX junction boxes to connect a series of LED Lights.Features: 12/24v DC IP66 4x Fused Power/DMX outputs (4A max power output) Built-in DMX terminator DMX input/output to allow multiple expansion To be used in conjunction with OceanLED Xtreme Series DMX Colours Robust Polycarbonate Design See-through lid to view connections Semi-transparent LID Specifications:Warranty: 2 years Quick Guide (pdf)

Read more less

3M Data Cable for Full Spectrum HubThis data cable is compatible with Metro Marine's full spectrum hub.

Read more less

6M Data Cable for Full Spectrum HubThis data cable is compatible with Metro Marine's full spectrum hub.

Read more less

4M Data Cable for Full Spectrum HubThis data cable is compatible with Metro Marine's full spectrum hub.

Read more less

3M Jumper Cable for Full Spectrum FixturesThis jumper cable is compatible with all Metro Marine full spectrum RGBW fixtures. 

Read more less

0.6M Data Cable for Full Spectrum HubThis data cable is compatible with Metro Marine's full spectrum hub.

Read more less

3M Switch Control Cable for Single Color HubThis switch control cable is compatible with Metro Marine's single color hub. 

Read more less

3M Jumper Cable for Monochromatic FixturesThis jumper cable is compatible with all Metro Marine monochromatic fixtures. 

Read more less

URC-102 Master Controller for RCL-50 and RCL-100 Searchlight Replacement controller which controls On/Off, rotation speed and the XRCiZ feature of the RCL-50 and RCL-100 searchlights.Compatible With:RCL-50 and RCL-100 searchights *Not compatible with RCL 100-LEDIn the Box: URC-102 Controller Connectors *Sold as an Individual WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 4"H x 7"W x 8"L WT: 1 lbs UPC: 791659192733

Read more less

4" LED Light Strip - Blue with Gasket - 12VThis is a multi-use 4" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companionways, or for step illumination.Features: 12VDC, 1.2W 6 EA Blue 2835 LEDs IP67 *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 2"W x 5"L WT: 0.1 lbs UPC: 786142416410

Read more less

Scan-Strip Light - 8" - WhiteScan-Strip LED lighting is a quality product for marine or RV use.Features: 8 in. white light in retail packaging Mount this scan strip light under gunwales, in storage lockers, coolers, fish boxes, and engine rooms Use the below deck in cabin areas for general lighting or courtesy lights  *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 4"W x 9"L WT: 0.15 lbs UPC: 786142413464

Read more less

LightArmor Plug-In Base - 2 Pin - Black - TeardropINTRODUCING LIGHTARMOR PLUG-IN BASES, a new line of light bases designed for premium performance, styling, and durability. Across the entire product line, you get the intelligent engineering that LightArmor is known for.A Sure FitThe new Light Armor Plug-In Light Bases have a threaded design feature that fits perfectly with the threaded locking collar now offered across the entire line of Attwood Pole Lights. This unique system ensures a tight and secure fit that prevents annoying rattling while underway or traileringKey Features: Threaded Locking System for a secure fit Unique cover design Stays secure while underway or trailered Low-profile prevents water from pooling on top surface WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

OceanDMX RC Explore XFM Dual 915MHzThe OceanDMX RC allows you to remotely control the RGBW color or dual-color LED lighting system installed on your boat via the DMX protocol (the lighting system must be DMX compatible). The remote has 3 programmable scenes with up to 10 pre-set modes, including a pause function. You can use up to 8 different remotes to control your lights with just 1 receiver. The kit consists of the hand-held push-button remote control, provided with a waterproof pouch, and the IP68 waterproof DMX Receiver. The remote has a range of up to 20 meters* and connects with the receiver using radio frequency (RF). The OceanDMX RC has the ability to connect to 4 zones independently**, therefore you can control your transom lights independently from your port/starboard lights. The OceanDMX RC can also be used with other 3rd party DMX systems, such as deck lighting, boat signage, etc.Features: User-friendly interface, easy and simple operation Control up to 4 zones Control of third-party DMX devices 3 programmable scenes Can be controlled by a maximum of 8 different remotes Pre-set 10 changing modes, with pause function (Colours only) Enable to dim brightness of each R, G, B, W channel (B & W channels for dual-color version), in order to mix colors. Box Contents: Remote control Waterproof pouch DMX Receiver Control Cable Terminator (Not included for X-Series) DMX Junction Box (X-Series Only) Installation Manual Quick Guide (pdf)

Read more less

6-Channel Digital Switch Module Shadow-NET™ Control for Single Color & 3rd Party LightingThe 6-channel digital switch module offers a convenient way to integrate any standard light with the Shadow-Caster™ MFD interface. Simply plug in the module to the Shadow-NET™ system and switch support will automatically populate on the screen.Each module provides 6 channels of support, that will handle up to 10 amps per channel with digital fault protection. There is also a manual switch input for overriding the interface.Features: 6 independent digital switches Control other brands of lights with the Shadow-Caster™ MFD interface and phone app Digital over current fault protection Manual switch override Green/red LEDs provide the status of each channel Full integration with Shadow-NET™ interface The blue backlight indicates the power state Specifications: 12/24V operation 10A each channel 5/16” power lugs IP67 Deutsch connections Power lug protection boots What's Included? 6 channel digital power switch Mounting hardware 4 #8 PH x.5” Pre-wired mating connectors 3 year standard warranty Quick Guide (pdf)

Read more less

2013-2018 RAM 1500 Bumper Mount for 40" Lightbar - Black2013-2018 Dodge RAM 1500 Bumper Mount - Urethane bumper only. Fits any one (1) 30" SR-Series, 30" RDS SR-Series, 30" SAE, or 30" Midnight SR-Series RIGID LED light bar. Features: Aggressive RIGID Styling Stainless Steel Construction Black Powder Coat Finish Includes All Necessary Hardware Fits any one (1) 30" SR-Series, 30" RDS SR-Series, 30" SAE, or 30" Midnight SR-Series RIGID LED light bar ∗ Lights sold separately Brochure (pdf)

Read more less

2013-2018 RAM 1500 Bumper Mount for 30" Lightbar - Black2013-2018 Dodge RAM 1500 Bumper Mount - Urethane bumper only. Fits any one (1) 30" SR-Series, 30" RDS SR-Series, 30" SAE, or 30" Midnight SR-Series RIGID LED light bar. Features: Aggressive RIGID Styling Stainless Steel Construction Black Powder Coat Finish Includes All Necessary Hardware Fits any one (1) 30" SR-Series, 30" RDS SR-Series, 30" SAE, or 30" Midnight SR-Series RIGID LED light bar ∗ Lights sold separately Brochure (pdf)

Read more less

Wedge Plate for GS-850 & GS-950In case your T-top has a slight curve, keep the appearance of your Grand Slam 850 Electric VHF Antenna Mount and Grand Slam 950 Electric Anchor & Stern Light clean by mounting them perfectly straight with our plastic wedge plates.Features: Corrects angle of GS-850 and GS-950 to perpendicular to the T-top  Fits Grand Slam 850 Electric VHF Antenna Mount and Grand Slam 950 Electric Anchor & Stern Light No drilling 1-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Closed Cell Foam Gasket for Ember Series LightsFoam gasket used during the installation of Ember Series Lights.Sold as a single Specifications: Type: Parts Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs

Read more less

2018+ Ford F-150 Hidden Grille Mount f/6" Lightbar - Black2018+ Ford F-150 Grille Mount, fits any two (2) 6" SR-Series, 6" SAE, or 6" Midnight SR-Series RIGID LED light bar. Features: Agrressive RIGID Styling Stainless Steel Construction Black Powder Coat Finish Includes All Necessary Hardware Fits any (2) 6" SR-Series, 6" SAE, or 6" Midnight SR-Series RIGID LED light bar ∗Lights sold separately Brochure (pdf)

Read more less

2018 Jeep Wrangler JL Fog Mount f/2 D-Series LightsRIGID Fog Mounts for the 2018 Jeep Wrangler JL stand alone when it comes to auxiliary lighting on and off the road. These mounts give that sleek OEM look but add the incredible look and functionality of the RIGID brand. This mount fits the RIGID D-Series and mounts in the existing OEM location. These mounts are made from laser cut stainless steel and have been powder coated allowing for a clean sleek look. Own The Night with the RIGID mounts for your Jeep Wrangler JL. Lights sold separately.In the Box:All Necessary Hardware∗ Sold as a Pair

Read more less

Light Bar Security Kit for Flush Mount LightsStainless steel security hardware kit for any of the RIGID Flush-mount LED Lights. Includes security nuts/bolts and necessary security keys for installation. Must be used along with standard hardware supplied with your light.Features:  Stainless Steel Construction Hardware Includes: Security Bolts and Security Keys One (1) kit required for a pair of lights.Disclaimer - RIGID Industries hereby renounces any and all warranties, guarantees, obligations, liabilities, express or implied, arising by law or otherwise, with respect to this security kit, and specifically disclaims any implied warranty of fitness for any purpose.

Read more less

2017-2018 Raptor Triple Fog Mount KitThe 2017-2018 Ford Raptor Fog Light Mount Kit allows you to mount our D-Series (Dually or D2) LED lights (not included) in your Ford's OEM fog lamp locations. This kit gives your otherwise square D-Series lights a clean from-the-factory look without having to drill or cut into your bumper. Made from high quality stainless steel, these adaptor plates are powder-coated black for a long-lasting finish. This kit comes with everything you need to install 6 D-Series lights (not included) in both fog light locations and is backed by RIGID Industries' limited lifetime warranty. Fits 6 D-Series.

Read more less

Pigtail Adapter f/RGB Accent Lighting PodsThis Pigtail Adapter is designed to wire Heise RGB accent light pods (HE-TL1RGB/HE-ML1RGB) into any four wire positive anode RGB controller (HE-RGBSAC-1) without cutting the waterproof connection.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less