
-
Lumitec Lumitec GAI2 White Dimming/Red & Blue Non-Dimming Heavy Duty Base - Brushed Housing [111800]
GAI2 White Dimming/Red & Blue Non-Dimming Heavy-Duty Base - Brushed HousingLumitec's best-selling positionable light just got better. Lumitec's enhanced General Area Location (GAI) light now has TWICE the output and a more efficient optical system! GAI's small size, high output and heavy duty machining aluminum base make this light perfect for a wide range of applications: reading light, task light or even a work space light. Completely sealed and IP67 compliant.Specifications: Lumens: 372 Voltage:10-30V DC 12V DC Amps: 500mA 24V DC Amps: 250mA Rated Watts: 6 CCT: 5000 CRI: 70+ Operating Temp F/C: -31°F/35°C to 131°F/55°C Timed Toggled Protocol (TTP): Yes Third Party Dimmer Compatability (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: 3/8" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12/24v Housing: Brushed LED Color: White/Blue/Red Dimming: Yes Box Dimensions: 4"H x 4"W x 5"L WT: 0.4 lbs UPC: 089300600677
$268.69 $254.29
-
Lumitec Lumitec Contour Series Navigation/Docking Combination Light - Starboard Green [101839]
Contour Series Navigation/Docking Combination Light - Starboard GreenInnovation – plain and simple. Lumitec’s engineers have combined a bright, sharp 1,000-lumen dock light with a U.S. Coast Guard-approved 2nm navigation light. Easy to install, great looking, and all the reliability you’ve come to expect from Lumitec.Specifications: Output: Starboard Green Visibility: USCG2NM Flood Lumens: 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A (flood) 24V DC Amps: 600mA (flood) Conforms to: ABYC A1 Specifications: Housing: White LED: Yes Lens Color: Green Visible Range (Miles): 2nm Voltage - Input Range (Volts): 12/24v Box Dimensions: 4"H x 5"W x 5"L WT: 0.55 lbs UPC: 089300018397 Brochure (pdf)
$276.89 $249.99
-
Lumitec Lumitec Contour Series Navigation/Docking Combination Light - Port Red [101849]
Contour Series Navigation/Docking Combination Light - Port RedInnovation – plain and simple. Lumitec’s engineers have combined a bright, sharp 1,000-lumen dock light with a U.S. Coast Guard-approved 2nm navigation light. Easy to install, great looking, and all the reliability you’ve come to expect from Lumitec.Specifications: Output: Port Red Visibility: USCG2NM Flood Lumens: 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A (flood) 24V DC Amps: 600mA (flood) Conforms to: ABYC A1 Specifications: Housing: White LED: Yes Lens Color: Red Visible Range (Miles): 2nm Voltage - Input Range (Volts): 12/24v Box Dimensions: 4"H x 5"W x 5"L WT: 0.55 lbs UPC: 089300018496 Brochure (pdf)
$276.89 $249.99
-
Lumitec Lumitec Nevis Legacy Surface Mount Engine Room Light [101922]
Nevis Legacy Surface Mount Engine Room LightAnother high output alternative to large, boxy, unreliable fluorescents. Certified Ignition protected and small enough to mount anywhere. Wide beam angle that douses hard-to-light areas with a bright even light. Completely sealed, IP67 compliant, and intrinsically safe.Specifications: Voltage: 10 - 30V DC 12V DC Amps: 900mA 24V DC Amps: 450mA Correlated Color Temperature: 6500 Color Rendering Index: 70+ Rated Watts: 11 Lumens (White): 19 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 5.00" (12.7cm) Height: 2.5" (6.35cm) Depth: 0.63" (1.60cm)
$259.39 $247.09
-
Lumitec Lumitec Contour Masthead Combo Light w/Antenna Mount *Antenna Mount Base Not Included [101904]
Contour Masthead Combo Light with Antenna Mount *Antenna Mount Base Not IncludedThe Contour Masthead 360 All-Round Anchor Combo Light takes masthead combo lights to a new level. An innovative design approach dramatically reduces the light's profile and weight, making this Contour Masthead/Anchor Combo Light the slimmest and lightest on the market. Meeting USCG and NMMA C5 2021 standards and rated to 3 nautical miles, the Contour Masthead/Anchor Combo Light is available in a 39” (1m) length with two mounting options—a motorized base and antenna mount. It is IP67 compliant. NOTE: The Antenna Mount base is not included with the light (shaft fixture ONLY).Specifications: 12 VDC Amps: 185mA 24 VDC Amps: 95mA CE Certified: No Color Match Commitment (CM): No Color Output: White Finish/Housing: 39"-White with Antenna Base Height: 39 in (99.6 cm) - 1M IP Rating: 67 Op. Temp F/C: -31/35 to + 131/55 PLI Enabled: No Related Watts: 2.2W Third Party Dimmer Compatibility (3PD): No Timed Toggled Protocol (TTP): No UL Certified: No USCG Rated: 3 NM Voltage: 10-30 VDC
$254.59 $244.39
-
Lumitec Lumitec Seablaze Mini Spectrum RGBW LED Underwater Light Anodized Aluminum 12/24v
Lumitex SeaBlaze Mini LED Underwater Light - Spectrum with PLIModel: 101832Packing all the features of its big brother the SeaBlazeX2 into a powerful little package, the SeaBlaze Mini Spectrum is perfect for smaller trailer boats and skiffs. 870 lumens, full-color RGBW, PLI-enabled, meaning it is compatible with our award-winning Poco system and surface mountable with no external drivers and nearly infinite output colors.Specifications Color Output RGBW Spectrum Finish / Housing Anodized Aluminum Lumens 670 Voltage 10-30 vDC 12v DC Amps 880mA 24v DC Amps 450mA Related Watts 10.5 Number of Channels N/A Correlated Corrected Temperature (CCT) 6500 Color Rendering Index (CRI) 70+ Op. Temp F/C -31/35 to + 131/55 Diameter 2.98in (7.57 cm) Depth 0.63in (1.6 cm) Mounting Hole 1/2" IP Rating 68 PLI Enabled Yes Timed Toggled Protocol (TTP) Yes Third Party Dimmer Compatibility (3PD) No Color Match Commitment (CM) No
$243.99
-
Lumitec Lumitec SeaBlaze Mini Spectrum LED Underwater Light - PLI-Enabled [101832]
SeaBlaze Mini Spectrum LED Underwater Light - PLI-EnabledPacking all the features of its big brother the SeaBlazeX2 in a powerful little package, the SeaBlaze Mini Spectrum is perfect for smaller trailer boats and skiffs. 870 lumens, full-color RGBW, PLI-enabled, meaning it is compatible with Lumitec's award-winning Poco system and surface mountable with no external drivers and nearly infinite output colors.Specifications: Color Output: RGBW spectrum Finish / Housing: Anodized aluminum Lumens: 670 Voltage: 10-30 vDC 12v DC Amps: 880mA 24v DC Amps: 450mA Related Watts: 10.5 Number of Channels: N/A Max Amp/ch: N/A Correlated Corrected Temperature (CCT): 6500 Color Rendering Index (CRI): 70+ Op. Temp F/C: -31/35 to + 131/55 Diameter: 2.98in (7.57 cm) Height: N/A Width: N/A Depth: 0.63in (1.6 cm) Mounting Hole: 1/2" IP Rating: 68 PLI Enabled: Yes Timed Toggled Protocol (TTP): Yes Third-Party Dimmer Compatibility (3PD): No Color Match Commitment (CM): No CE Certified: Yes UL Certified: No USCG Rated: N/A
$252.29 $243.99
-
Lumitec Lumitec Capri2 - Flush Mount LED Flood Light - 2-Color White/Red Dimming [101100]
Capri2 - Flush Mount LED Flood Light - 2-Color White/Red DimmingWhat do you do to improve the industry's best selling LED flood light? Add features, improve the beam pattern, and increase the output! Lumitec's Capri2 flood lights do just that. New two-color technology provides amazing white output with elegant blue and night vision-preserving red. Our exclusive DeckSweep© technology puts the light where you need it most, providing for up to twice the useable light of competitors. Fully sealed and, as with all Lumitec products, proudly designed and manufactured in the USA.Specifications: Voltage: 10 - 30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 16 Lumens (White): 610 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 4.49" (11.41cm) Height: 1.65" (4.20cm) Depth: 2.83" (7.20cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 16w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 2"H x 4"W x 7"L WT: 0.6 lbs UPC: 089300103680 Quick Guide (pdf)Brochure (pdf)
$268.39 $240.19
-
Lumitec Lumitec Nevis2 Engine Room White/Red LEDLight Brushed Finish 12/24v
Lumitec Nevis2 Engine RoomWhite/Red LEDLightModel: 101148With more than 1,000 integrating sphere tested lumens, the Nevis2 douses hard to light areas with a 180-degree spread of bright even light. The Nevis2 is the world’s FIRST two-color mechanical space and compartment light with 30% more usable light than our successful original Nevis line. Available in white/red or white/blue, certified as ignition protected. Completely sealed and compatible with most PWM LED dimmers.Specifications Lumens (White) 1000 Voltage 10-30vDC 12v DC Amps 1.3A 24v DC Amps 600mA Rated Watts 16 CCT 5000 CRI 70+ Op. Temp F/C -31/35 to + 131/55 F Timed Toggled Protocol (TTP) Yes Third Party Dimmer Compatibility (3PD) Yes Color Match Commitment (CM) Yes Mounting Hole Diameter 5/32" Height 2.5in (6.35cm) Width 5in (12.7cm) Depth 0.63in (1.60cm) Diameter N/A
$239.49
-
Lumitec Lumitec Nevis2 Engine Room White/Blue LED Light Brushed Finish 12/24v
Lumitec Nevis2 Engine RoomWhite/Blue LED LightModel: 101147With more than 1,000 integrating sphere tested lumens, the Nevis2 douses hard to light areas with a 180-degree spread of bright even light. The Nevis2 is the world’s FIRST two-color mechanical space and compartment light with 30% more usable light than our successful original Nevis line. Available in white/red or white/blue, certified as ignition protected. Completely sealed and compatible with most PWM LED dimmers.Specifications Lumens (White) 1000 Voltage 10-30vDC 12v DC Amps 1.3A 24v DC Amps 600mA Rated Watts 16 CCT 5000 CRI 70+ Op. Temp F/C -31/35 to + 131/55 F Timed Toggled Protocol (TTP) Yes Third Party Dimmer Compatibility (3PD) Yes Color Match Commitment (CM) Yes Mounting Hole Diameter 5/32" Height 2.5in (6.35cm) Width 5in (12.7cm) Depth 0.63in (1.60cm) Diameter N/A
$234.59
-
Lumitec Lumitec Surface Mount Aluminum Navigation Light Port - Red [101845]
Surface Mount Aluminum Navigation Light Port - RedLumitec offers surface mount navigation lights for retrofit and new applications where a molded-in pocket is not possible or practical: clean styling and unmatched reliability. Choose classic aluminum half-round design for mounting to vertical surfaces, or the more contemporary composite version for horizontal mounting surfaces. U.S. Coast Guard approved 2nm for vessels up to 50m/165 feet. Features: IP67 IP Rated 2nm ABYC CS Standard 2-Wire Hookup 3-Year Warranty Specifications: Finish: Brushed Color Output: Port/Red Voltage: 10-30VDC 12VDC: 34mA 24VDC: 17mA Visibility: 2nm
$246.09 $231.69
-
Lumitec Lumitec Surface Mount Aluminum Navigation Light Starboard - Green [101835]
Surface Mount Aluminum Navigation Light Starboard - GreenLumitec offers surface mount navigation lights for retrofit and new applications where a molded-in pocket is not possible or practical: clean styling and unmatched reliability. Choose classic aluminum half-round design for mounting to vertical surfaces, or the more contemporary composite version for horizontal mounting surfaces. U.S. Coast Guard approved 2nm for vessels up to 50m/165 feet. Features: IP67 IP Rated 2nm ABYC CS Standard 2-Wire Hookup 3-Year Warranty Specifications: Finish: Brushed Color Output: Starboard/Green Voltage: 10-30VDC 12VDC: 67mA 24VDC: 33mA Visibility: 2nm
$246.09 $231.69
-
Lumitec Lumitec PICO S8 Switching Module Only Works with POCO3
Lumitec Pico S8 ModuleModel: 101684Pico Expansion Modules extend the power and reach of the Poco Digital Lighting Control system making it possible to control other manufacturers’ luminaires, lighting accessories and devices that do not have the sophisticated PLI technology built-in. The Pico S8 module provides the ability to assign Poco virtual switch commands to physical mechanical switches (8 max). This means that your MFD can remain on a dedicated screen, or even be turned off, and a physical switch will activate the virtual switch command through the Poco module. Requires Poco 3 for compatibility (S8 module is not compatible with all earlier versions of the Poco module).Specifications Voltage 10-30vDC 12v DC Amps 0.1 amp max Op. Temp F/C -31/35 to + 131/55 Timed Toggled Protocol (TTP) Yes Third Party Dimmer Compatibility (3PD) Yes Height 2.6 in (6.60cm) Width 1.9 in (4.82cm) Depth 0.52 in (1.32cm)
$228.69
-
Lumitec Lumitec Pico S-8 Expansion Module [101684]
Pico S-8 Expansion ModulePico Expansion Modules extend the power and reach of the Poco Digital Lighting Control system making it possible to control other manufacturers’ luminaires, lighting accessories and devices that do not have the sophisticated PLI technology built-in. The Pico S8 module provides the ability to assign Poco virtual switch commands to physical mechanical switches (8 max). This means that your MFD can remain on a dedicated screen, or even be turned off, and a physical switch will activate the virtual switch command through the Poco module. Requires Poco 3 for compatibility (S8 module is not compatible with all earlier versions of the Poco module).
$242.09 $228.69
-
Lumitec Lumitec Ibiza Utility/Engine Room Light 12v White Finish White/Red LEDfts
Lumitec Ibiza Engine Room/ Utility Light White Finish with Red/WhiteDimmin LED'sModel: 101521As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens and dual-color output options, Ibiza is IP67 compliant, completely sealed and compatible with most PWM LED dimmers. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners.
$226.49
-
Lumitec Lumitec Ibiza LED Engine Room Light - Red/White Dimming - White Finish [101521]
Ibiza LED Engine Room Light - Red/White Dimming - White FinishAs beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens and dual-color output, Ibiza is IP67 compliant, completely sealed and compatible with most PWM LED dimmers. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners.Specifications: Lumens (White): 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Rated Watts: 16 CCT: 5000 CRI: 70+ Op. Temp F/C :-31/35 to + 131/55 F Timed Toggled Protocol (TTP): Yes Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: 2in (5.08cm) Width: 9in (22.86) Depth: 1in (2.54cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 10-30v Bulb Watts: 16w LED: Yes Box Dimensions: 2"H x 6"W x 13"L WT: 1.15 lbs UPC: 089300015211 Brochure (pdf)
$238.09 $226.49
-
Lumitec Lumitec Caprera3 Flood Light RGBW Spectrum Bracket Mount Black 12/24v
Lumitec Caprera3 Flood Light RGBW Spectrum LED, Black HousingModel: 101715Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrun output. Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.The all-new Caprera3 spreader light series are smaller and lighter than the previous line of Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.An all-new feature to the Caprera line is full-color RGBW Spectrum output.The Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.Specifications Voltage 10-30vDC Color output RGBW Sectrum Current draw @ 12vDC 1A CCT 5000 CRI 70+ Beam pattern Flood PLI Yes TTP Yes IP rated IP67 Housing Black
$224.69
-
Lumitec Lumitec Caprera3 Spreader Light - Spectrum - Black Housing [101715]
Caprera3 Spreader Light - Spectrum - Black HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood
$243.09 $224.69
-
Lumitec Lumitec PICO C-4 Expansion Module
Lumitec Pico C4 Expansion ModuleModel: 101609Pico Expansion Modules extend the power and reach of the Poco Digital Lighting Control system making it possible to control other manufacturers’ luminaires, lighting accessories and devices that do not have the sophisticated PLI technology built-in. The Pico C-4 module provides Poco or TTP control of third party RGB or RGBW lighting accessories.Specifications Voltage 10-30vDC 12v DC Amps 2.5 amp mx 24v DC Amps 2.5 amp max Op. Temp F/C -31/35 to + 131/55 Timed Toggled Protocol (TTP) Yes Third Party Dimmer Compatibility (3PD) Yes Dimensons 2.6" h x 1.9" w x 0.52" d
$224.59
-
Lumitec Lumitec Pico C-4 Expansion Module [101609]
Pico C-4 Expansion ModulePico Expansion Modules extend the power and reach of the Poco Digital Lighting Control system making it possible to control other manufacturers’ luminaires, lighting accessories and devices that do not have the sophisticated PLI technology built-in. The Pico C-4 module provides Poco or TTP control of third party RGB or RGBW lighting accessories. The Pico P-1 module acts as an in-line solid-state relay, controlling any large load up to 20 Amps with on/off and PWM dimming control. Owner's Manual (pdf)
$237.79 $224.59
-
Lumitec Lumitec Ibiza Utility/Engine Room Light 12v White Finish White/Blue LEDfts
Lumitec Ibiza Engine Room/ Utility Light White Finish with Blue/WhiteDimmin LED'sModel: 101522As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens and dual-color output options, Ibiza is IP67 compliant, completely sealed and compatible with most PWM LED dimmers. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners.
$223.39
-
Lumitec Lumitec Capri3 Flood Light RGBW Spectrum LED Flush Mount Black 12/24v
Lumitec Capri3 Flood Light RGBW Spectrum LED, Black HousingModel: 101725Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrun output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy fit butterfly clip mounting system which greatly simplifies the installation process. Capri3 is IP67 compliant and PLI enabled (Poco compatible) on most models.The all-new Capri3 spreader light series are smaller and lighter than the previous line of Capri lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.An all-new feature to the Capri line is full-color RGBW Spectrum output.Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.Want to upgrade your current Capri lights to the all-new Capri3? No worries, the Capri3 has a retro fit kit available which fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.The Capri3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.Specifications Voltage 10-30vDC Color output RGBW Sectrum Current draw @ 12vDC 1A CCT 5000 CRI 70+ Beam pattern Flood PLI Yes TTP Yes IP rated IP67 Housing Black
$222.49
-
Lumitec Lumitec Capri3 Spreader Light - Spectrum - Black Housing [101725]
Capri3 Spreader Light - Spectrum - Black HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood
$240.79 $222.49
-
Lumitec Lumitec Moray Flex Strip Light RGBW 1.5ft 10-14vDC White Finish
Lumitec Moray 1.5' Flex Light with Integrated ControllerModel: 101647For years our customers have asked us for a reliable, high quality and innovative strip-light offering. The wait is over. Introducing Moray. The Moray Flex Light is the only RGBW flex light in the world to have both an internal driver and an internal color/output controller. This means that Moray can be connected directly to a 2-wire DC electrical system, allowing color and dimming control with any standard on/off switch and with no external driver. Moray is the flexible, versatile, reliable solution that reduces cost, time and complexity. And because it’s also compatible with our Poco Digital Lighting Control system, Moray can easily be controlled from an MFD, smartphone, or tablet. Available in four convenient sizes.Specifications Lumens (White) 113 Voltage 10-30vDC 12v DC Amps 312mA 24v DC Amps N/A Rated Watts 4.1 CCT 5000 CRI 80+ Op. Temp F/C -31/35 to + 131/55 F Timed Toggled Protocol (TTP) Yes Third Party Dimmer Compatibility (3PD) No Color Match Commitment (CM) No Mounting Hole Diameter N/A Height 18" Width 0.65" Depth 0.65" Diameter N/A Finish/Housing White
$222.29
-
Lumitec Lumitec Moray Flex Lighting - Strip - Spectrum RGBW - 1.5 [101647]
Moray Flex Lighting - Strip - Spectrum RGBW - 1.5'The Moray Flex Light is the only RGBW flex light in the world to have an internal color/output controller. This means that Moray can be connected directly to a 2-wire DC electrical system, allowing color and dimming control with any standard on/off switch with no external driver. And because it’s also compatible with our Poco Digital Lighting Control system, Moray can easily be controlled from an on-board MFD, smartphone, or tablet. Moray is the flexible, versatile, reliable solution that reduces cost, time and complexity. Features: 2-Wire Hookup - Easy to install 2-wire hook up simplifies wiring and reduces installation time. Built-In Color Controller - A fully integrated color controller with power management circuitry provides full color control without the need for bulky external control modules. Connectors and mounting screws supplied Specifications: Output: Full-Color Spectrum Lumens: 225-900 8 available lengths 12VDC Amps: 687mA - 2.75A CRI: 80+ CCT: 5000 Timed Toggle Protocol IP Rate IP67 Dimming Color Cycle 2-Wire Hookup European Conformity 3-Year Warranty Specifications: Voltage - Input Range (Volts): 12v LED Color: RGBW Dimming: Yes Bulb Type: LED Box Dimensions: 2"H x 16"W x 16"L WT: 1.2 lbs UPC: 089300016478
$234.89 $222.29
-
Lumitec Lumitec Capri2 - Flush Mount LED Flood Light - Black Housing - 2-Color White/Blue Dimming [101186]
Capri2 - Flush Mount LED Flood Light - Black Housing - 2-Color White/Blue DimmingWhat do you do to improve the industry's best selling LED flood light? Add features, improve the beam pattern, and increase the output! Lumitec's Capri2 flood lights do just that. New two-color technology provides amazing white output with elegant blue and night vision-preserving red. The exclusive DeckSweep technology puts the light where you need it most, providing for up to twice the usable light of competitors. Fully sealed and, as with all Lumitec products, proudly designed and manufactured in the USA.Specifications: Voltage: 10 - 30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 16 Lumens (White): 1000 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 4.49" (11.41cm) Height: 1.65" (4.20cm) Depth: 2.83" (7.20cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 16w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 3"H x 5"W x 7"L WT: 0.6 lbs UPC: 089300011862
$248.49 $222.29
-
Lumitec Lumitec Caprera3 Flood Light RGBW Spectrum Bracket Mount White 12/24v
Lumitec Caprera3 Flood Light RGBW Spectrum LED, White HousingModel: 101710Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrun output. Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.The all-new Caprera3 spreader light series are smaller and lighter than the previous line of Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.An all-new feature to the Caprera line is full-color RGBW Spectrum output.The Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.Specifications Voltage 10-30vDC Color output RGBW Sectrum Current draw @ 12vDC 1A CCT 5000 CRI 70+ Beam pattern Flood PLI Yes TTP Yes IP rated IP67 Housing White
$219.49
-
Lumitec Lumitec Caprera3 Spreader Light - Spectrum - White Housing [101710]
Caprera3 Spreader Light - Spectrum - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood
$263.89 $219.49
-
Lumitec Lumitec Perimeter Flood Light White LED White Finish 12/24v
Lumitec Perimeter LED Flood Light White Housing White LED's Model: 101475 Lumitec’s new Perimeter light is versatile, attractive and powerful. With more than 1,000 true lumens and an optical system designed to spread light very widely and evenly, it is uniquely suited to various specialty applications. Mount it 3 to 4 feet high to illuminate work surfaces with minimum up-shine. Use it overhead in cramped service spaces for offset illumination of critical mechanical components. Idea for marine use, mount it on vertical exteriors of pilot houses, cabins, or for terrestrial vehicles and trailers for bright, even perimeter illumination. Aluminum housing and impact-resistant plastic window means years of trouble free service even in the most brutal environments. Specifications Lumens ( White) 1000 Voltage 10-36vDC Current Draw 1.3A @ 12vDC Rated watts 16 CCT 5000 CRI 70+ Operating Temperature F/C :-31/35 to + 131/55 Timed Toggled Protocol (TTP): Yes Third Party Dimmer Compatibility (3PD) Yes Color Match Commitment (CM): Yes Dimensions 1.73in L x 6.36in W x 1.48in D
$218.19
-
Lumitec Lumitec Capri3 Flood Light RGBW Spectrum LED Flush Mount White 12/24v
Lumitec Capri3 Flood Light RGBW Spectrum LED, White HousingModel: 101720Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrun output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy fit butterfly clip mounting system which greatly simplifies the installation process. Capri3 is IP67 compliant and PLI enabled (Poco compatible) on most models.The all-new Capri3 spreader light series are smaller and lighter than the previous line of Capri lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.An all-new feature to the Capri line is full-color RGBW Spectrum output.Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.Want to upgrade your current Capri lights to the all-new Capri3? No worries, the Capri3 has a retro fit kit available which fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.The Capri3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.Specifications Voltage 10-30vDC Color output RGBW Sectrum Current draw @ 12vDC 1A CCT 5000 CRI 70+ Beam pattern Flood PLI Yes TTP Yes IP rated IP67 Housing White
$217.39
-
Lumitec Lumitec Capri3 Spreader Light - Spectrum - White Housing [101720]
Capri3 Spreader Light - Spectrum - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood
$234.59 $217.39
-
Lumitec Lumitec Caprera2 - LED Flood Light - Black Finish - 2-Color White/Red Dimming [101218]
Caprera2 - LED Flood Light - Black Finish - 2-Color White/Red DimmingWhat do you do to improve the industry's best selling LED flood light? Add features, improve the beam pattern, and increase the output! Lumitec's Caprera2 flood lights do just that. Two-color technology provides amazing white output with elegant blue and night vision-preserving red. Our exclusive DeckSweep technology puts the light where you need it most, providing for up to twice the usable light of competitors. Fully sealed and, as with all Lumitec products, proudly designed and manufactured in the USA.Specifications: Voltage: 10 - 30V DC 12V DC Amps: 1.3mA 24V DC Amps: 600mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Lumens (White): 16 Rated Watts: 290 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 4.49" (11.41cm) Height: 1.65" (4.20cm) Depth: 2.83" (7.20cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 16w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 3"H x 5"W x 7"L WT: 0.7 lbs UPC: 089300012180 Quick Guide (pdf)Brochure (pdf)
$244.19 $217.39
-
Lumitec Lumitec Caprera2 - Dual Color LED Flood Light - White/Red Dimming [101103]
Caprera2 - LED Flood Light - 2-Color White/Red DimmingWhat do you do to improve the industry's best selling LED flood light? Add features, improve the beam pattern, and increase the output! Lumitec's Caprera2 flood lights do just that. New two-color technology provides amazing white output with elegant blue and night vision-preserving red. Our exclusive DeckSweep© technology puts the light where you need it most, providing for up to twice the useable light of competitors. Fully sealed and, as with all Lumitec products, proudly designed and manufactured in the USASpecifications: Voltage: 10 - 30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 16 Lumens (White): 610 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 4.49" (11.41cm) Height: 1.65" (4.20cm) Depth: 2.83" (7.20cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 16w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 2"H x 4"W x 7"L WT: 0.6 lbs UPC: 089300103635 Quick Guide (pdf)Brochure (pdf)
$243.99 $217.29
-
Lumitec Lumitec Capri2 - Flush Mount LED Flood Light - 2-Color White/Blue Dimming [101099]
Capri2 - Flush Mount LED Flood Light - 2-Color White/Blue DimmingWhat do you do to improve the industry's best selling LED flood light? Add features, improve the beam pattern, and increase the output! Lumitec's Capri2 flood lights do just that. New two-color technology provides amazing white output with elegant blue and night vision-preserving red. Our exclusive DeckSweep© technology puts the light where you need it most, providing for up to twice the useable light of competitors. Fully sealed and, as with all Lumitec products, proudly designed and manufactured in the USA.Specifications: Voltage: 10 - 30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 16 Lumens (White): 1000 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 4.49" (11.41cm) Height: 1.65" (4.20cm) Depth: 2.83" (7.20cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 16w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 2"H x 4"W x 7"L WT: 0.6 lbs UPC: 089300103673 Quick Guide (pdf)Brochure (pdf)
$242.19 $217.19
-
Lumitec Lumitec Caprera2 - Dual Color LED Flood Light - White/Blue Dimming [101102]
Caprera2 - LED Flood Light - 2-Color White/Blue DimmingWhat do you do to improve the industry's best selling LED flood light? Add features, improve the beam pattern, and increase the output! Lumitec's Caprera2 flood lights do just that. New two-color technology provides amazing white output with elegant blue and night vision-preserving red. Our exclusive DeckSweep© technology puts the light where you need it most, providing for up to twice the useable light of competitors. Fully sealed and, as with all Lumitec products, proudly designed and manufactured in the USASpecifications: Voltage: 10 - 30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 16 Lumens (White): 1000 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 4.49" (11.41cm) Height: 1.65" (4.20cm) Depth: 2.83" (7.20cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 16w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 4"H x 6"W x 7"L WT: 0.75 lbs UPC: 089300103628 Quick Guide (pdf)Brochure (pdf)
$240.99 $215.39
-
Lumitec Lumitec Nautilus Piling Light Spectrum Warm White 10-30vDC Bronze Housing
Lumitec Nautilus Piling Light Spectrum RGBW - Warm White, BronzeModel: 101671Small, clean, and versatile, Nautilus is perfect for pilings, posts, pathways, and wall-wash applications. Surface mountable with included adapter for curved for flat mounting locations. Nautilus is available in a hand-polished 316 stainless steel or hand-polished bronze finish. Choose from single color warm white or full-color Spectrum output. The Nautilus light is PLI and TTP enabled, meaning it can be used with any standard 12v-24v DC power supply; added to a Mantis dock light kit; or designed into a Kraken dock light system. Completely water sealed and IP67 compliant.Specifications Lumens (White) 255 Voltage 10-30vDC 12v DC Amps 440mA 24v DC Amps 240mA Related Watts 5.2w CCT 3000 CRI 80+ Op. Temp F/C -31/35 to + 131/55 F Timed Toggled Protocol (TTP) Yes Third Party Dimmer Compatibility (3PD) Yes Color Match Commitment (CM) Yes Mounting Hole Diameter N/A Height 4.2" Width 1.6" Depth 1.5" Diameter N/A Finish/Housing Bronze
$214.09
-
Lumitec Lumitec Caprera3 Flood Light White/Red LEDfts Dimmable Bracket Mount Black 12/24v
Lumitec Caprera3 Flood Light Red/White LED, Black HousingModel: 101717Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrun output. Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.The all-new Caprera3 spreader light series are smaller and lighter than the previous line of Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.The Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.Specifications Voltage 10-30vDC Color output White/red Current draw @ 12vDC 1A CCT 5000 CRI 70+ Beam pattern Flood PLI Yes TTP Yes IP rated IP67 Housing Black
$213.89
-
Lumitec Lumitec Caprera3 Spreader Light - White/Red Dimming - Black Housing [101717]
Caprera3 Spreader Light - White/Red Dimming - Black HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood
$232.19 $213.89
-
Lumitec Lumitec Capri3 Flood Light White/Red LEDfts Dimmable Flush Mount Black 12/24v
Lumitec Capri3 Flood Light White/Red LED, Black HousingModel: 101727Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrun output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy fit butterfly clip mounting system which greatly simplifies the installation process. Capri3 is IP67 compliant and PLI enabled (Poco compatible) on most models.The all-new Capri3 spreader light series are smaller and lighter than the previous line of Capri lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.The Capri3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.Want to upgrade your current Capri lights to the all-new Capri3? No worries, the Capri3 has a retro fit kit available which fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.Specifications Voltage 10-30vDC Color output White\Red Current draw @ 12vDC 1A CCT 5000 CRI 70+ Beam pattern Flood PLI Yes TTP Yes IP rated IP67 Housing Black
$213.39
-
Lumitec Lumitec Nautilus Piling Light Spectrum Cool White 10-30vDC Bronze Housing
Lumitec Nautilus Piling Light Spectrum RGBW - Cool White, BronzeModel: 101632Small, clean, and versatile, Nautilus is perfect for pilings, posts, pathways, and wall-wash applications. Surface mountable with included adapter for curved for flat mounting locations. Nautilus is available in a hand-polished 316 stainless steel or hand-polished bronze finish. Choose from single color warm white or full-color Spectrum output. The Nautilus light is PLI and TTP enabled, meaning it can be used with any standard 12v-24v DC power supply; added to a Mantis dock light kit; or designed into a Kraken dock light system. Completely water sealed and IP67 compliant.Specifications Lumens (White) 360 Voltage 10-30vDC 12v DC Amps 440mA 24v DC Amps 240mA Related Watts 5.2w CCT 5000 CRI 70+ Op. Temp F/C -31/35 to + 131/55 F Timed Toggled Protocol (TTP) Yes Third Party Dimmer Compatibility (3PD) Yes Color Match Commitment (CM) Yes Mounting Hole Diameter N/A Height 4.2" Width 1.6" Depth 1.5" Diameter N/A Finish/Housing Bronze
$210.99
-
Lumitec Lumitec Scallop Pathway Light Spectrum Warm White 10-30vDC Bronze Housing
Lumitec Scallop Pathway Light Spectrum RGBW Warm White, BronzeModel: 101673With a sleek, low profile design Lumitec’s new Scallop Pathway Light is the world’s first ADA-compliant, PLI-compatible, dock and pathway light. The carefully engineered beam-angle minimizes glare while cleanly illuminating walkway surfaces. Scallop is available in a hand-polished 316 stainless steel or hand-polished bronze finish. The Scallop light is PLI and TTP enabled, meaning it can be used with any standard 12v-24v DC power supply; added to a Mantis dock light kit; or designed in to a Kraken dock light system. Completely water sealed and IP67 compliant.Specifications Lumens (White) 80 Voltage 10-30vDC 12v DC Amps 340mA 24v DC Amps 190mA related watts 5.2w CCT 3000 CRI 80+ Op. Temp F/C -31/35 to + 131/55 F Timed Toggled Protocol (TTP) Yes Third Party Dimmer Compatibility (3PD) Yes Color Match Commitment (CM) Yes Mounting Hole Diameter N/A Height N/A Width N/A Depth .56" Diameter 3.8" Finish/Housing Bronze
$209.29
-
Lumitec Lumitec Scallop Surface Mount Pathway Light - Spectrum RGBW/Warm White - Bronze Finish [101673]
Scallop Surface Mount Pathway Light - Spectrum RGBW/Warm White - Bronze FinishWith a sleek, low profile design Lumitec’s Scallop Pathway Light is ADA-compliant, PLI-compatible, dock and pathway light. The carefully engineered beam-angle minimizes glare while cleanly illuminating walkway surfaces. Scallop is available in a hand-polished 316 stainless steel or hand-polished bronze finish. Choose from warm white or RGBW full-color output. The Scallop light is PLI and TTP enabled, meaning it can be used with any standard 12V-24V DC power supply; added to a Mantis dock light kit; or designed in to a Kraken dock light system. Completely water sealed and IP67 compliant. Features: Stainless Steel or Bronze Finish ADA compliant Warm White LED or RGBW full color changing Made in USA 3-Year Warranty Specifications: Voltage 10-30v DC 4 Watts (340mA @12V or 190mA @24V) "POCO" Digital Lighting Control compatible Dimensions: 4" Diameter x 0.60" Thick What's In The Box? 1 Scallop pathway light 2 Mounting screws Instruction Sheet Specifications: Voltage - Input Range (Volts): 12/24v LED Color: RGBW Housing: Bronze Bulb Type: LED Box Dimensions: 2"H x 7"W x 8"L WT: 0.65 lbs UPC: 089300016737
$219.59 $209.29
-
Lumitec Lumitec Scallop Pathway Light Spectrum Cool White 10-30vDC Bronze Housing
Lumitec Scallop Pathway Light Spectrum RGBW, BronzeModel: 101628With a sleek, low profile design Lumitec’s new Scallop Pathway Light is the world’s first ADA-compliant, PLI-compatible, dock and pathway light. The carefully engineered beam-angle minimizes glare while cleanly illuminating walkway surfaces. Scallop is available in a hand-polished 316 stainless steel or hand-polished bronze finish. The Scallop light is PLI and TTP enabled, meaning it can be used with any standard 12v-24v DC power supply; added to a Mantis dock light kit; or designed in to a Kraken dock light system. Completely water sealed and IP67 compliant.Specifications Lumens (White) 80 Voltage 10-30vDC 12v DC Amps 340mA 24v DC Amps 190mA related watts 5.2w CCT 5000 CRI 70+ Op. Temp F/C -31/35 to + 131/55 F Timed Toggled Protocol (TTP) Yes Third Party Dimmer Compatibility (3PD) Yes Color Match Commitment (CM) Yes Mounting Hole Diameter N/A Height N/A Width N/A Depth .56" Diameter 3.8" Finish/Housing Bronze
$209.09
-
Lumitec Lumitec Capri3 Flood Light White/Red LEDfts Dimmable Flush Mount White 12/24v
Lumitec Capri3 Flood Light White/Red LED, White HousingModel: 1017222Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrun output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy fit butterfly clip mounting system which greatly simplifies the installation process. Capri3 is IP67 compliant and PLI enabled (Poco compatible) on most models.The all-new Capri3 spreader light series are smaller and lighter than the previous line of Capri lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.The Capri3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.Want to upgrade your current Capri lights to the all-new Capri3? No worries, the Capri3 has a retro fit kit available which fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.Specifications Voltage 10-30vDC Color output White\Red Current draw @ 12vDC 1A CCT 5000 CRI 70+ Beam pattern Flood PLI Yes TTP Yes IP rated IP67 Housing White
$207.29
-
Lumitec Lumitec Zephyr Deck Light White LED Spreader Light White Base
Lumitec Zephyr Deck Light Brushed/White Housing, White Light Model: 101325 UPC: 89300013255 Lumitec’s new spreader light is equally well suited to lighting the foredeck of an elegant sloop or the cockpit of a sport yacht. Mounted on spreaders, spars, radar arches or towers and flybridges at a mounting height of 16 feet, our spreader light brightly illuminates an area nearly 24 feet in diameter with more than 1,000 lumens. Positionable, sleek and versatile with unsurpassed reliability — meaning no more costly and complex bulb replacements. Specifications Lumens 1000 Voltage 10-30vDC Amps 1.3A @ 12vDC, 600ma @ 24vDC Rated watts 16 CCT 5000 CRI 70+ Timed toggeled Protocol No Third party dimmer compatable (3PD) Yes Color match commitment Yes Dimensions 4.49" W x 2.83"D
$206.29
-
Lumitec Lumitec Zephyr LED Spreader/Deck Light - Brushed White Base - White Non-Dimming [101325]
Zephyr LED Spreader/Deck Light - Brushed White Base - White Non-DimmingLumitec's spreader light is equally well suited to lighting the foredeck of an elegant sloop or the cockpit of a sport yacht. Mounted on spreaders, spars, radar arches or towers and flybridges at a mounting height of 16 feet, our spreader light brightly illuminates an area nearly 24 feet in diameter with more than 1,000 lumens+. Positionable, sleek and versatile with unsurpassed reliability - meaning no more costly and complex bulb replacements.Specifications: Lumens (White): 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Rated Watts: 16 CCT: 5000 CRI: 70+ Op. Temp F/C: -31/35 to + 131/55 Timed Toggled Protocol (TTP): No Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: N/A Width: 4.49in (11.41cm) Depth: 2.83in (7.20cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 16w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 4"H x 5"W x 5"L WT: 0.4 lbs UPC: 089300013255
$218.49 $206.29
-
Lumitec Lumitec GAI2 White White Dimming Red/Blue
Lumitec White General Area Interior Light White Dimming, Blue Non-dimming, Red Non-dimming Model: 111828 UPC: 089300600561 Our best-selling positionable light just got better. Lumitec's newly enhanced General Area Location (GAI) light now has TWICE the output and a new, more efficient optical system! GAI's small size and high output make this light perfect for a wide range of applications: chart light, reading light, task light or even a deck light. Completely sealed and IP67 compliant. Specifications Voltage 10 - 30vDC 12vDC Amps 300mA 24vDC Amps 160mA Correlated Color Temperature 5000 Color Rendering Index 70+ Rated watts 6 Lumens (White) 372 Operating Temperature -31 to + 131 F Dimensions Width: 2.53in (6.42cm). Height: 2.53in (6.42cm). Depth: 1.49in (3.78cm)
$204.99
-
Lumitec Lumitec Nautilus Piling Light Spectrum Warm White 10-30vDC Stainless Steel Housing
Lumitec Nautilus Piling Light Spectrum RGBW - Warm White, Stainless SteelModel: 101670Small, clean, and versatile, Nautilus is perfect for pilings, posts, pathways, and wall-wash applications. Surface mountable with included adapter for curved for flat mounting locations. Nautilus is available in a hand-polished 316 stainless steel or hand-polished bronze finish. Choose from single color warm white or full-color Spectrum output. The Nautilus light is PLI and TTP enabled, meaning it can be used with any standard 12v-24v DC power supply; added to a Mantis dock light kit; or designed into a Kraken dock light system. Completely water sealed and IP67 compliant.Specifications Lumens (White) 255 Voltage 10-30vDC 12v DC Amps 440mA 24v DC Amps 240mA Related Watts 5.2w CCT 3000 CRI 80+ Op. Temp F/C -31/35 to + 131/55 F Timed Toggled Protocol (TTP) Yes Third Party Dimmer Compatibility (3PD) Yes Color Match Commitment (CM) Yes Mounting Hole Diameter N/A Height 4.2" Width 1.6" Depth 1.5" Diameter N/A Finish/Housing Stainless Steel
$204.49
