Deck Fill for Pressure Relief Systems - Straight Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.Features: Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications) Automatic nozzle shutoff 4-18 gpm Stainless Steel finish An essential component of VaporTec and SecureStop Designed and tested to prevent water from entering the fuel system EPA / CARB Certified Hinged audible click cap meets EPA requirements Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

Command Ratchet Hinges - 9-3/8" - Polished 316 Stainless Steel - PairConstructed from high-grade stainless steel and brass, our Command Ratchet Hinge is ideal for sunpads, bolsters and lounge backrests. This heavy-duty specialty hinge has a 15-degree locking inclination and ratchets up to four positions.Features: Highly polished marine-grade stainless-steel Type-316L  All brass bearings for durability  Meets ABYC H-31 standards class B* application, 250lb ft of torque load for pair  15-degree locking inclination increments starting at 30 degrees  Easily adaptable to many applications  Designed for up to 4" thick cushions  Returns to horizontal position at 100 degrees  Countersunk for #10 fastener or 1/4-20 bolt  Sold in pairs  5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Flat Deck Hinge with Pin & Lanyard - 7/8"-1-1/4"Features: Offered in concave and flat mounts  Secure fit with removable pin and lanyard or turn and lock D-ring This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Teak Four-Rod Storage Rack 15-1/2"L x 2-7/8"H x 3/4"D Sold in pairs

Read more less

Black Flush Lock - 2.5" x 2.5" w/Offset Cam Bar & Flexible Polymer StrikeFeatures: Black Polymer Chrome Plated Zinc Alloy Stainless Steel Stem and Lock Nut  Detents Indicate Open or Closed Position Installs in a 2" Diameter Hole For Door Thickness 1/4" to 1-1/8"

Read more less

Two-Tier Spice Rack Holds up to 6 standard spice bottles on each self Shelves are 3" deep 13-1/8"W x 10-1/8"H x 4-1/4"D

Read more less

Stainless Steel Louvered Vent - 5" x 2-5/8" Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Chrome Barrel Bolt - 5"Features: Chrome Plated Bronze Body & High Impact Black Nylon Bulkhead Keeper 3/8" Diameter Bolt Bulkhead Keeper Easily Installs in a 5/8" Hole Includes Friction Pad to Eliminate Rattle and Provide Smooth Operation  Overall Dimensions: 5-1/4" x 1-7/16"

Read more less

Chrome Plated Brass 3/8" Inset HingesFeatures: Semi-Concealed For Inset Doors Chrome Plated Stamped Brass 3/8 Inch Inset Specifications: Material: Brass Color: Brass Box Dimensions: 1"H x 3"W x 7"L WT: 0.2 lbs UPC: 085226023651

Read more less

Locking Nylon T-Handle - White/WhiteWhitecap's Locking White Nylon T-Handle. Specifications: T-Handle Latches Overall diameter: 3" Cut-Out: 2-1/2" Surface Depth: 1/8" - 3/4" Fastener is included

Read more less

Flush Latch - Non-Locking - 2.5" x 2.5" with Offset Adjustable Cam BarFeatures: Black Polymer Chrome Plated Zinc Alloy Stainless Steel Stem and Lock Nut Detents Indicate Open or Closed Position Installs in a 2" Diameter Hole For Door Thickness 1/4" to 1-1/8"

Read more less

Surface Mount Flush Latch - Offset Cam Bar - 2.5" Hole - WhiteFeatures: White plastic and chrome plated zinc alloy Offset cam bar For surface thickness: 1/8" to 3/4" (0.3cm to 1.9cm) Face plate O.D.:3" (7.6cm) Installs in 2-1/2" (6.4cm) Diameter Hole

Read more less

T-Handle Latch Investment cast 316 stainless steel construction for corrosion resistance and durability. This latch features a recessed T-handle for a flush, clean installation. Installs with four #8 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Pole Storage Clips - Black - PairFeatures:Soft Black U.V. Stabilized Fits 3/4 or 7/8 Inch Diameter Tubing Also Available in Camo Line (Dealer Package Only) Specifications: Pole O.D. Size: 3/4" Dimensions: 3/4" x 2-1/4" x 1-5/8" Screw Size: #10 P.H.

Read more less

90° P-Trap Fuel Tank Vent - Flush Mount - Black with Stainless Steel Vent HeadThis Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness. eliminates the need for an anti-siphon loop in the vent hose. This is a flush mount vent for use with a 5/8-inch interior diameter hose. It requires a 1-3/8-inch installation hole and can be used with a maximum hull thickness of 1 inch.Features: This black vent with a stainless steel vent head meets ABYC standards Flush Mount - 5/8" I.D. hose (inch) 1-3/8" install. hole size (inch) 1" Max. hull thickness *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.Features: Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications) Dual 1 psi diurnal emission control and overpressure relief safety valves built into the cap Automatic nozzle shutoff 4-18 gpm Stainless Steel finish An essential component of VaporTec and SecureStop Designed and tested to prevent water from entering the fuel system EPA / CARB Certified Hinged audible click cap meets EPA requirements Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

8" Fold-Down Dock CleatLow-profile cleats simply fold-down when not in use and flip back up when it comes time to tie off.Features: Ideal for small boats and watercraft Low-profile, fold-down design keeps cleat clear of dock traffic Marine-grade aluminum protected with corrosion resistant finish Easy to install on all dock types Requires two standard 3/8" carriage bolts (not included) Specifications: Finish: White Size: 8" Construction: Aluminum Box Dimensions: 1"H x 7"W x 8"L WT: 1.25 lbs UPC: 022697120496

Read more less

Drop Leaf Table Top Open: 18-1/2"W x 27-3/4"L x 20-1/2"H Drop Leaves Down: 10-5/8"W x 18-1/2"L x 20-1/2"H Oiled finish

Read more less

Solid Top Fold-Away Table Solid brass hardware Open: 17-3/4" square x 18-1/2"H Closed: 17-3/4"W x 23"H x 2-3/4"D Quick set-up and folds for storage Oiled finish

Read more less

Adjustable Torque Hinge, Symmetric Torque, Small Size, Acetal Copolymer, Natural, BlackAllow users the flexibility to define and adjust the operating effort required to move or position panels. E6 hinges provide infinite control over door positioning and accommodate variables in enclosure construction - without added hardware or installation costs. Aesthetic designs and concealed mounting hardware options provide a clean presentation.Specifications: Material - Acetal Copolymer Color/Appearance - Black Forward Torque (Nm) - 0.25 Reverse Torque (Nm) - 0.25 Access Restriction - No Restriction Torque Type - Symmetric Installation - Threadstud and Nut Series - Adjustable Torque Class - E6 - Adjustable Torque Position Control Hinges

Read more less

Flush Pull Latch - Pull To Open - Non-Locking White PlasticSpecifications: Material: Plastic Material Grade: PC / PBT Blend Finish: Natural Color/Appearance: White Access Restriction: No Restriction Grip Range: 25.000-26.000 mm (0.98-1.02 in) Panel Thickness: 12.000-17.000 mm (0.47-0.67 in) Profile: Low Profile Size Series: Medium Size Southco offers modifications to our standard products, explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.

Read more less

Description: 8" (20cm) 316 S.S. Hollow Base CleatHeight: 1-9/16"Fastener: 1/4" (4)Weight - 12.8 ozMaterial: 316 Stainless SteelDimensions: L:8" (20 cm) H: 1-9/16" Specifications: Size: 8" Finish: Polished Construction: Stainless Steel Box Dimensions: 2"H x 5"W x 11"L WT: 0.8 lbs UPC: 725060601058

Read more less

4-1/2" Folding Cleat - Stainless SteelFeatures: Folding Cleat Made with 316 Stainless Steel Length - 4-1/2" Height - Closed - 1/2", Open - 1-1/2" Fastener- 1/4" (2) - Not Included Overall body length - 4-9/16" Overall body width - 1-9/16" For top mount applications where depth under the deck is a concern Specifications: Construction: Stainless Steel Size: 4.5" Finish: Polished Box Dimensions: 2"H x 3"W x 7"L WT: 0.5 lbs UPC: 725060674434

Read more less

Teak Deck Steps8-3/4"L x 3-1/2"W x 1/2"H

Read more less

Description: Replacement Cap & Chain for 6123, 6124, 6125 and 6126.Material: 316 Stainless Steel

Read more less

Clam Shell Midget Vent 1-1/2" x 1-3/4" Material: 304 Stainless Steel Size: 1-1/2" x 1-3/4" Fastener: #6 (3)

Read more less

Latch-tite™ Lifting Handle - 3" Round - Stainless SteelStainless Steel Type 316Deluxe PolishedLatch-tite™ handles have been designed to provide high performance, trouble free use in the most hostile conditions. The latches and all shafts and tongues are made from cast type 316 stainless steel. Round design enhance any marine craft. Latches can be installed vertically or horizontally, making them ideal for any opening.The Latch-tite™series is for applications that require a heavy-duty, high performance construction and high quality appearance.Features: Cast stainless steel Deluxe polish finish Unique patented stainless steel shaft with bushing and twin Nitrile “O” rings for greater protection against water penetration Over center anti-rattle handles provide quiet operation Concealed fasteners Mold plugs available upon request for boat builders Specifications: Dimensions: 3" Diameter Edge Thickness: 3/32" Adjust Depth: 2-7/8" Hole Size: 2-9/16" Overall Depth: 3-13/16" Screw: #8 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Replacement Eye Bolt for Suspending Transducer for Ultra & Pro Pack IIReplacement Eye-Bolt AssemblyWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Barrel Bolt - Chrome Finish - 2" Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Skene Chocks - 4-1/2"These Skene Chocks provide a smooth lead for your mooring or dock lines minimizing chafing. The tips of these chocks are designed to overlap, preventing the motion of the boat from causing the line to accidentally work free of the chock. Left and right skene chocks included. Accommodates lines up to 3/4”. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Smooth Quarter Turn Deck Plate - White - 5" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Round Louvered Vent - 4" Round Louvered Vents allow air in while keeping water out. Installs with four #6 FH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 4” 0.88 in2. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Gas Filled Lift Spring - 20" - 30# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length: 20" Lift Capacity: 30 lbs Box Dimensions: 1"H x 1"W x 21"L WT: 0.4 lbs UPC: 035514321938

Read more less

Flush Hatch Pull Constructed of corrosion resistant investment cast 316 stainless steel. These hatch pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Installs with four #8 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Gas Filled Lift Spring - 17" - 40# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length: 17" Lift Capacity: 40 lbs Box Dimensions: 1"H x 1"W x 18"L WT: 0.1 lbs UPC: 035514321891

Read more less

Screw-Out Deck Plate - White - 6" Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Stud Mount Flanged Hand Rail with Mounting Flange - 10" These Stud Mounted Flanged Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance. Design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive, with no visible mounting hardware.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Square Tube Top FittingTop Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Gas Filled Lift Spring - 10" - 60# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length: 10" Lift Capacity: 60 lbs Box Dimensions: 1"H x 2"W x 14"L WT: 0.2 lbs UPC: 035514321792

Read more less

Door Catch Constructed of sturdy injection molded nylon. These Door Catches provide secure closure for cabinet doors. Installs with four #6 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Push Button Rim Latch - Polished Chrome Display parts come complete with both strike plates. Hole spacing on the flat strike plate (224320) is 1-7/8". Hole spacing on the 90° strike plate (224321) is 1-3/16". Both require a #4 FH fastener.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Smooth Color: Black

Read more less

Anchor Replacement Roller - 2-3/4" x 2-7/8"Features: Nylon Replacement Wheel Diameter: 2-3/4" Width: 2-7/8" Rope Size: 3/4"

Read more less

Deck Fill for Carbon Canister System - Straight Body & Scalloped Chrome CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. Features: All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling Fits 1-1/2 (inch) fill hose Designed and tested to prevent water from entering the fuel system Compatible with Ethanol blended fuels Chrome finish Automatic nozzle shutoff 4-18 gpm Dual 1 psi overpressure relief safety valves built into the deck fill caps EPA / CARB Certified Quick Guide (pdf)

Read more less

Triple Lock Rectangular Marine Hatch - 10" x 14" - BlackThis Triple Latch Marine Deck Hatch features 3 locking points which when engaged cause the camming surface to pull the lid into the gasket creating a water tight seal. Constructed of injection molded polypropylene with a structural honeycomb lid for superior rigidity and strength. Non-slip textured surface. Can be mounted horizontally or vertically. Full length piano hinge for added strength and security. Interior opening is 11-1/8" X 7" and will accept group 24 series size batteries. Installs with ten #10 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Midget Vent - Small Midget Vents provide a splash-proof opening through transoms, cabin sides, etc. Great for routing cables and wires or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Corrosion resistant stamped 304 stainless steel construction. Easy to install with pre-drilled holes for three #6 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Flip Top Deck Fill - Gas - 1-1/2" Hose Flip Top Hose Gas Fill is constructed of investment cast 316 stainless steel. Installs with four #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Hatch Handle Latch - 3-1/8" x 2-11/16"Constructed of sand cast brass with a chrome plated finish. These Hatch Handle Latches are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Adjustable locking arm adds additional security. Installs with four #8 FH fasteners (not included). Once installed, the locking arm can be trimmed to length.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less