Nylon Deck Hinge - BlackDeck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Concave Hinges are designed to rail mount on 7/8” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 3/16” pin size. Constructed of UV stabilized injection molded nylon. Installs with two #10 FH fasteners (not included). Available in black or white.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Drain Cover - 3-1/4" Stamped 304 Stainless SteelWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Locker Vent - 2-3/8" x 6-3/4" Locker Vents are designed to promote air circulation in interior areas and prevent mold, mildew, and unpleasant odors. Easy to install with six #8 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 2.56 in2. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Quick Release Fender LockStainless SteelHigh PolishFor dockside safety and convenience, Taco Marine's fender-clip ensures secure, quickly stored fender lines. The Fender clips ensure that lines remain at the optimum length with the mounting pin attached. At the dock, you simply insert the pin into the fitting and your boat is protected, with the fenders their ideal position.Features: Designed for simple single hand operation Will allow easy installation and removal of float style fenders Large push-button for comfortable operation Large hole diameter for rope Limited 3 year Warranty Material Characteristics Stainless Steel Type 316 Overall height above deck: 1.60° Drain plug: 1/4" NPT This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

TCL4 9" Clear Locker DoorKeep storage areas dry with this tried, tested, and trusted black clear locker door/deck hatch.Features:Allows for easy inspection without having to open the doorMeasurements: Diameter: 228 mm (9 in.) Aperture: 179 mm (7 in.) Materials: Body: Polycarbonate Locking Ring: Acetal Seal: Nitrile

Read more less

17" Gas Spring - 60lb - Stainless SteelFeatures: 316 S.S. Gas Spring Ext. Length - 17" Comp. Length - 10-1/4" Rod Diameter - 6mm Tube Diameter - 15mm P1 Force - 60 Specifications: Length: 17" Lift Capacity: 60 lbs Box Dimensions: 1"H x 1"W x 21"L WT: 0.45 lbs UPC: 725060366032

Read more less

Fender CleatLength: 2"Base: 1-1/16" x 1-9/16"Fastener:#6(4)Material: Chrome Plated Brass Specifications: Finish: Chrome Size: 2" Construction: Brass Box Dimensions: 1"H x 3"W x 3"L WT: 0.1 lbs UPC: 725060097608

Read more less

Faux Center Nut Black with 1/2" & 5/8" M12 Base for Cast Steering WheelsReplacement center cap for Cast Steering Wheels

Read more less

15" Gas Spring - 20lb - Black NitrateFeatures: Black Nitride Gas Spring Ext. Length - 15" Comp. Length - 9-1/2" Rod Dia. - 6mm Tube Dia. - 15mm P1 Force - 20 Specifications: Length: 15" Lift Capacity: 20 lbs Box Dimensions: 1"H x 3"W x 17"L WT: 0.4 lbs UPC: 725060332051

Read more less

Description: Plate - 2-3/4" x 1-1/4"Material: 304 Stainless Steel Stock: 3/8" Eye Ring Diameter: 1"Thread Length: 3-7/16"

Read more less

Description: 316 S.S. Hose Deck Fill with Key Flange - 3" Hose - 1-1/2" Angle - 90 degrees Chain - Yes Fastener - #10 (3) Weight - 12.8 oz.Material: 316 Stainless Steel Type: Gas

Read more less

Clam Shell Ventilator - Chrome Plated Brass - 4" x 3-3/4"Specs: Chrome Plated Brass Dimensions Base: 4" x 3-3/4" Width Opening: 2-1/2" Height Opening: 1-5/8" Screw Size: #6

Read more less

Morosini 13.8" Steering Wheel - Black Polyurethane with Stainless Steel Spokes & Chrome HubFeatures: Standard 3/4″ Taper Hub Included Meet with the EN 28848 and ABYC P22 Standards Ø 13.8” (350 mm) Grip: Polyurethane Spokes: 304 Stainless Steel Hub: Chrome Colors: Black Specifications: Dimensions: 13.8" Hub Included Steering Wheel Dish: 3.66"

Read more less

Excellent universal rub rail kit. Durable Semi-Rigid rub rail with flexible chrome insert. Flex chrome insert offers the elegant look of stainless steel at a fraction of the cost. Continuous coil for one piece installation without seams. Kit includes end caps & screws ready for immediate installation. Features: Whitew/Flex Chrome Insert 1-5/8"H x 3/4"W x 70'LThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Stainless Steel Set Screws1/4"-28 Thread10 Pack

Read more less

Carbon Fiber Primus Wheel with Knob 13.5" with Sanntoprene Finger Grip 3/4" Tapered Shaft with CF NutFew components on a boat are touched as frequently as its steering wheel. That’s why Schmitt Marine designed Primus, its cast stainless steel steering wheel, to deliver maximum ergonomic all-day comfort and engineered it for long-lasting, uncompromising durability. The visually striking wheel complements any helm and comes with a lifetime warranty.The Primus is manufactured using a unified investment casting, including the integrated ring, for massive strength. NMMA type-accepted and CE certified, it’s so strong, that it greatly exceeds ABYC P-22 and ISO 8848 standards. Polished to a mirror-like finish, the 316L stainless steel provides superior corrosion resistance and has minimal maintenance needs.Available in 13.5″ and 15.5″ diameters, the rim is slightly thicker than most other wheels. At 1–1/8″, the larger size lessens the hand fatigue that’s common with thinner styles.UV-resistant black Santoprene™ rubber provides all-weather control and comfort, and a dramatic counterpoint to the gleaming stainless steel. Underneath, finger grips deliver a sure, solid grip. It extends through the top of the rim, providing an additional gripping surface. The contiguous piece of Santoprene also extends slightly under the spoke junction for a smooth, ergonomic fit. The result is an attractive wheel that matches any helm décor.The Primus is available in three spoke configurations: slotted with decorative Santoprene inserts, open slots, or solid. Edges have a slight radius for comfort, without sacrificing their markedly defined appearance.The optional stainless steel Control Knob is large and comfortable. It’s installed on a spoke, 3/4″ from the rim edge, to ensure it won’t interfere with any controls or the driver’s helm space. The installation has no visible protruding fasteners to catch clothing or hinder the smooth tactile experience. Schmitt designed the knob with glass ball bearings to eliminate corrosion and provide a lifetime of free-spinning.The Primus incorporates the industry standard 3/4″ tapered hub. The durable stainless steel center nut works with all steering systems, with optional styles available.Features: Carbon Fiber Primus Wheel Knob 13.5"  Sanntoprene Finger Grip  3/4" Tapered Shaft  CF Nut

Read more less

170 Finger Grip Destroyer 5-Spoke 13.5" Stainless Steel Cap 3/4" Tapered Shaft with KnobThe Destroyer Wheel is a 5-spoke stainless steel steering wheel that can be a great addition to any boat. This specific steering wheel comes with a fitted black center cap.Features: Destroyer Wheel 6 spoke Standard rim Back center cap 10-degree dish Fits a 1" straight shaft

Read more less

Deck Fills for Pressure Relief Systems - Straight Body - Scalloped Black Plastic CapAttwood's Pressure Relief Systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.Features: Sold as a single unit Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications) Dual 1 psi diurnal emission control and overpressure relief safety valves built into the cap Automatic nozzle shutoff 4-18 gpm Black Composite finish An essential component of VaporTec and SecureStop Designed and tested to prevent water from entering the fuel system EPA / CARB Certified Hinged audible click cap meets EPA requirements Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

Flush Hatch PullThe new low profile flush hatch pull is an easy access handle for installation in lids, doors, compartments, and hatches. Handle is easy to grip, even with gloved hands. Durable ABS construction with black textured finish.

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Clear Color: Beige

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Clear Color: White

Read more less

7-1/2" Gas Spring - 40lb - Black NitrateFeatures: Black Nitride Gas Spring Ext. Length - 7-1/2" Comp. Length - 5-1/2" Rod Dia. - 6mm Tube Dia. - 15mm P1 Force - 40 Specifications: Length: 7-1/2" Lift Capacity: 40 lbs Box Dimensions: 1"H x 3"W x 9"L WT: 0.2 lbs UPC: 725060314019

Read more less

Navigation Rack5"H x 16-3/4"W x 3-1/2"D

Read more less

Teak Louvered InsertHeight:7-1/2"Width:9-1/8"Depth:3/4"Cut OutHeight:6-1/2"Width:8-1/2"Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Non-Skid Color: Black

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Clear Color: Black

Read more less

Concealed Soft Draw Latch with Keeper - Black RubberThe soft body construction of these latches quiets vibration and provides satisfactory performance despite misalignment. Internally-mounted lever provides over-center action for mechanical advantage in closing, plus protection against accidental opening Molded latch body conceals mechanism and mounting hardware Right-angle keeper design permits use in applications where panel is perpendicular to the frame Non-corrosive materials permit use in outdoor environments Provides steady state clamp force of 49 N (11 lbs.) at recommended mounting dimensions Industry Applications Appliance Electronic Enclosures Food Equipment HVAC Lawn/Garden Equipment Marine Medical

Read more less

SuproFlex Rub Rail Kit Gray with Gray Insert - 2"H x 29/32"W x 80'LThe SuproFlex Rub Rail Kit is lightweight and ultra-flexible to save you time and money while providing a seamless precision fit. The innovative SuproFlex series is co-extruded vinyl that provides two levels of hardness – ensuring enhanced protection from impact. SuproFlex Rub Rail requires minimal heating – reducing installation time and manpower. Additionally, SuproFlex Rub Rail requires no pre-forming and easily molds to most hull shapes.Features: Ideal for boats up to 65' Co-extruded to provide two levels of hardness Rigid backing and soft durometer front Shock-absorbing channels for higher impact resistance Lighter weight than traditional vinyl rub rail Requires no pre-forming and minimal heating Predrilled for fasteners Pairs with V12-0307GRD gray insert (included in the kit) Made in the USA 5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Compression Handle - Nylon White/Stainless Steel - Non-LockingCompression handles reduce and eliminate noise and rattle from hatches when the boat is underway. The handle uses acompressed gasket to create a water-tight seal for compartments or hatches.Features: Outer Diameter: 3" Cut-Out:2-1/2" Surface Depth: 1/8" - 3/4" Shaft Length: 1-9/16 - 1-3/4"

Read more less

Ground Fault Outlet Cover/Receptacle PlateHeight:5-1/16"Width:3-5/8"

Read more less

Description: 316 S.S. 6" E-Z Push-Up Cleat. Overall length-6-1/2" Overall width - 1-1/2" Depth - 3-9/16" Cleat length - 6" Stud length - 1-7/8" Barb size - 3/4" Max Rope Diameter - 1-1/4" Specifications: Size: 6" Finish: Polished Construction: Stainless Steel Box Dimensions: 1"H x 7"W x 9"L WT: 1.65 lbs UPC: 725060680916

Read more less

Quick Dock Cleat - 2-PackUsed for docking and tying up your paddleboard, kayak, small boat, or canoe with ease. Simply insert the quick dock cleat between dock boards and turn 90 degrees. Then tie up using your dock line.Features: High strength Stainless Steel material Rated for 1,000 pounds each Includes 2 dock cleats ¼” material Deburred clean edges Includes a carabiner Includes a strap to hold them together when they are not being used Specifications: Construction: Stainless Steel Box Dimensions: 1"H x 6"W x 8"L WT: 0.55 lbs

Read more less

Pontoon Fender & Dock Line Hanger - 2-PackThe pontoon dock line holder is the easiest most user-friendly way to hang a fender from your railing. It clips onto the railing and has a 1-way cleat on it to lock in your dock line. The built-in cleat allows you to adjust the height of the dock line when hanging fenders for mooring your pontoon.Features: Sold as a 2-pack Aluminum shell Nylon dock line cleat inside Push button locking mechanism built-in Deburred edges for a smooth finish Hooks to square pontoon railings Dock rope cleat allows you to adjust lengths Great for hanging fenders

Read more less

Pry-Out Deck PlatesBeckson developed the first pry-out deck plate. These plates were designed with an extra heavy O-ring to assure a water tight fit. Plates are provided with non-skid or smooth surfaces for different installation requirements. The original was used to access the handle for Beckson's permanently mounted pump. The Beckson Diamond Pattern deck plate extends across the center, eliminating a ring around the edge that traps dirt and debris. Pry-out plates should be installed in areas where internal pressure (oil-canning) is not present. O.D.: 8-1/2" Hole Cut: 6-1/2" Passage: 6-3/16" Center: Smooth

Read more less

Quarter-Turn Textured Deck Plate with Internal Collar - White - 8" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Textured Quarter Turn Deck Plate - White - 8" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

SuproFlex Rub Rail Kit with Flex Vinyl Overlay Insert - 1-5/8"H x 7/8"W x 60'L - White with White InsertThe Semi-Rigid SuproFlex Rub Rail Kit with a Flexible Vinyl Overlay Insert – an all-in-one Rub Rail replacement kit that complements a variety of boat types, including bass boats, and freshwater and saltwater bay boats. Semi-Rigid SuproFlex features a semi-rigid vinyl back and a 95-durometer, firmer face, and pairs exclusively with our attractive Flexible Overlay Vinyl Insert for added protection from impact and style. Additionally, this co-extruded vinyl rub rail features shock-absorbing channels for higher impact resistance and requires less heat during installation when compared to other semi-rigid or rigid profiles. This rub rail kit is available in a variety of sizes and colors, and includes stainless steel end caps and screws.Features: Available in one continuous coil of 60' Co-extruded to provide two levels of hardness Semi-Rigid backing and 95-durometer front Pairs exclusively with V12-9992 Flexible Overlay Vinyl Insert (included in kit) Shock-absorbing channels for higher impact resistance Lighter weight than traditional vinyl rub rail Requires no pre-forming and minimal heating Predrilled for fasteners Kit includes stainless-steel end caps and screws Made in the USA 5-year limited warranty

Read more less

SuproFlex Rub Rail Kit - White with Flex Chrome Insert - 2"H x 31/32"W x 80'LThe SuproFlex Rub Rail Kit is lightweight and ultra-flexible to save you time and money while providing a seamless precision fit. The innovative SuproFlex series is co-extruded vinyl that provides two levels of hardness – ensuring enhanced protection from impact. SuproFlex Rub Rail requires minimal heating – reducing installation time and manpower. Additionally, SuproFlex Rub Rail requires no pre-forming and easily molds to most hull shapes. Features: Ideal for boats up to 65' Co-extruded to provide two levels of hardness Rigid backing and soft durometer front Shock-absorbing channels for higher impact resistance Lighter weight than traditional vinyl rub rail Requires no pre-forming and minimal heating Pairs with V12-0307CP (included in kit) Made in the USA 5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Smooth Quarter Turn Deck Plate - Black - 6" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Combination Gas Fill & Tank Vent for 2" Hose - DieselFeatures: Chrome Plated Bronze Straight Neck Integral Tank Vent with Flame Arrestor O-Ring and Integral Retainer on Cap Included Ground Wire Required Specifications: For Fuel Hose: 2" For Vent Hose: 5/8" Length of Neck: 3-5/8" Screw Size: #8

Read more less

Cam BarThis cam bar is a spare part of Perko’s Flush Hatch Dog with a rectangular flange.  More specifically, it’s the cam bar for size #2. Quick Guide (pdf)

Read more less

Spring Clamps 1" - 1-3/4" - PairFeatures: Stainless Steel Minimum I.D.: 1" Max I.D.: 1-3/4" Projection: 2-1/4" Width Clamp: 5/8"

Read more less

20" Gas Spring - 40lb - Stainless SteelFeatures: 316 S.S. Gas Spring Ext. Length - 20" Comp. Length - 12" Rod Diamter - 5mm Tube Diameter - 15mm P1 Force - 40 Specifications: Lift Capacity: 40 lbs Length: 20" Box Dimensions: 1"H x 3"W x 22"L WT: 0.5 lbs UPC: 725060344078

Read more less

Long Towel Bar 23"L x 1"H x 2-1/2"D Includes mounting hardware

Read more less

Rectangular Drawer Pull 3-1/4" Length Recess Mount, 1/2" Deep 2-Pack

Read more less

Finger Pull 5/8" Barrel Length 1-1/4" Outer Diameter Recess Mount

Read more less

Teak Louvered InsertHeight:16"Width:9-1/8"Depth:3/4"Cut OutHeight:15"Width:8-1/8"Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension

Read more less

Clam Shell Midget Vent 2-1/4" x 2-1/4" Material: 304 Stainless Steel Size: 2-1/4" x 2-1/4" Fastener: #6 (3)

Read more less