M12 Black Wheel NutThe M12 Wheel Nut is meant for Uflex steering wheels. A wheel nut is needed for the installation process of a Uflex steering wheel.Features:Color: BlackSpecifications (inch): Length: 2" Width: 2" Height: 2" *Sold as an Individual

Read more less

Cockpit Table with Folding Leaves & 4 Cupholders - TeakFeatures: Table top dimensions - Closed - 16"W x 24"L, Open - 32"W x 24"L Brass hinges/stainless steel hardware The drink holder holds 4 glasses or 2 glasses and pair of binoculars Fold-down support leg - 30-1/2" long Installs on 7/8" or 1" diameter tubing pedestal steering guards with included nylon steering pedestal clamps (P/N 61395) Installs without drilling pedestal guard 2-brass barrel bolts (P/N 585B) included securing table leaves when the table is in the folded position The unit can be removed for storage by removing clamps Natural finish Some assembly required

Read more less

Straight Fuel Vent - Black PolypropyleneA fuel vent, vents air from a fuel tank as it's being filled. This straight fuel vent is patented splash-resistant and corrosion-resistant polypropylene. Meets ABYC ventilation specifications.Features: Straight Vent Color: Black Material: Polypropylene Specifications: Hose Size: (inch) 5/8" inner diameter Maximum Hull Thickness: (inch) 7/8" Installation Hole Size (inch) 3/4" *Attwood fuel tank vents meet or exceed U.S. Coast Guard regulations Quick Guide (pdf)

Read more less

SuproFlex Rub Rail Kit - White with Flex Chrome Insert - 2"H x 29/32"W x 60'LThe SuproFlex Rub Rail Kit is lightweight and ultra-flexible to save you time and money while providing a seamless precision fit. The innovative SuproFlex series is co-extruded vinyl that provides two levels of hardness – ensuring enhanced protection from impact. SuproFlex Rub Rail requires minimal heating – reducing installation time and manpower. Additionally, SuproFlex Rub Rail requires no pre-forming and easily molds to most hull shapes. Features: Ideal for boats up to 65' Co-extruded to provide two levels of hardness Rigid backing and soft durometer front Shock-absorbing channels for higher impact resistance Lighter weight than traditional vinyl rub rail Requires no pre-forming and minimal heating Pairs with V12-0307CP (included in kit) Made in the USA 5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Gasoline Deck Fill - 1-1/2 inch Stainless Steel AlloyFor 1-1/2 (inch) inner diameter hose. This deck fill is imprinted and color-coded to specify GASOLINE. The flush cap is slotted for a separate key and features an O-ring that seals the cap watertight. Cap is attached by a stainless steel, beaded chain. Long neck accommodates thick deck laminations. Key sold separately.Features: Highly-polished finish  “Gasoline” imprint with Red Color Code (Not for use with EPA Certified systems) Specifications: 3-1/4 (inch) Fill Neck Length 1-7/8 (inch) installation hole size 3-inch flange size Fits 1-1/2 (inch) I.D. Hose *Requires a bonding wire to prevent sparking when the nozzle is inserted on gasoline and diesel models per USCG and ABYC H-24 requirements Quick Guide (pdf)

Read more less

Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide.. Features: Black w/Black Insert 1-1/2"H x 3/4"W x 50'LThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Description: 316 S.S. No saw needed to install cleats. Drill & Drop into place. No special socket lengths needed to affix nuts when installing locking nuts. Overall length - 6-3/4" Overall width - 1-1/4" Depth - -9/16" Cleat length - 6" Stud length - 1-7/8" Barb size - 3/4" Max rope dia. - 7/8" Specifications: Size: 6" Finish: Polished Construction: Stainless Steel Box Dimensions: 3"H x 5"W x 8"L WT: 1.45 lbs UPC: 725060670917

Read more less

Nylon Body Compression HandleCompression handles reduce and eliminate noise and rattle from hatches when the boat is underway. The handle uses acompressed gasket to create a water-tight seal for compartments or hatches.Outer Diameter: 3"Cut-Out:2-1/2"Surface Depth: 1/8" - 3/4"Shaft Length: 1-9/16 - 1-3/4"

Read more less

T-Handle Latch - Nylon Black/Black - LockingFeatures: Threaded offset cam bar with set screw included Neoprene O-Ring Shaft is 1-3/8" long unless otherwise noted Specifications: Outer Diameter: 3" Cut-Out: 2-1/2" Surface Depth: 1/8" - 3/4" Fastener: Included

Read more less

Rub Rail End Cap - 1-7/8" - Stainless SteelStainless Steel Type 316PolishedCaps rub rail to finish end of rail and ensure that inserts stay intact.Features: Caps rub rail to finish end of rail Ensures inserts stay intact Offers a finished look Stainless Steel Marine Grade 316 Five year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Concealed Soft Draw Latch with Keeper - White RubberThe soft body construction of these latches quiets vibration and provides satisfactory performance despite misalignment. Internally-mounted lever provides over-center action for mechanical advantage in closing, plus protection against accidental opening Molded latch body conceals mechanism and mounting hardware Right-angle keeper design permits use in applications where panel is perpendicular to the frame Non-corrosive materials permit use in outdoor environments Provides steady state clamp force of 49 N (11 lbs.) at recommended mounting dimensions Industry Applications Appliance Electronic Enclosures Food Equipment HVAC Lawn/Garden Equipment Marine Medical Quick Guide (pdf)

Read more less

P10 Series Taco Marine customers can count on King StarBoard Polymer Sheets when it comes to creating new accessories or replacing wood, laminates or plastic parts on boats. The polymer sheet is environmentally stabilized to withstand the harshest marine conditions. It will not warp, rot or delaminate when exposed to humidity or water. It is also easy to fabricate with standard woodworking tools and requires little or no finishing.Features and Benefits High density polyethylene UV-stabilized Available in full and half sheets Also available in cut sizes that are individually wrapped for retail merchandising Withstands all harsh marine environments Three year limited warranty Made in USA Applications Electronic Boxes Cup Holders Shelves Cabinets Hatches and Doors Chart Holders Table Tops Rod Holder Racks Instrument Panels Tool Holders Leaning Posts Bait Wells and Covers Shower Floors This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Flexible Vinyl Black Rub Rail 1-1/16" x 1-7/8" 50'LFeatures: Tight-radius bending can be made with minimal heating Easy handling making these rub rails a good choice for do-it-yourself boaters Accepts flexible vinyl insert V12-0003 (sold separately) Endcap F90-0001 required.   Made in the USA 5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Flex Vinyl Rub Rail Kit - Black with White Insert - 50' - 1-1/16" x 11/16"Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide.Features: 50' Vinyl Rub Rail Kit 1-1/16" x 11/16" This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

6" Cleat - TeakUse these stylish cleats in your home, boat, RV, garage, or shed. Makes a perfect hook or drawer pull. Can be easily painted or stained.

Read more less

KingPin™ Power-Rise Stand-Up Threaded Pin - 1-PackFeatures: Adjustable Height To Be Used As A Seat Or Leaning Post Rotates 360°, Adjusts From 22-1/2″ To 29-1/2″ Use With Threaded KingPin™ Base (sold separately) Rated ABYC Class H-31 B (Fishing Only)  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Teak Lock-In Four-Rod Storage Rack Stainless steel and brass hardware 24"L x 1-3/16"H x 3-5/8"D

Read more less

Rigid Vinyl Flex-Core Rub Rail 1.58" x .635" - Frosty White 60'TACO Marine’s latest Rub Rail innovation is an improved design of our most popular rigid PVC shape with a lightweight, high-density inner core. This allows for easier handling, faster one-piece installation, improved dimensional stability, and production run consistency.Features: Ideal for boats up to 40 feet long Lightweight, easy handling and installation Solid, rigid PVC cap stock exhibits traditional surface characteristics, appearance, and impact properties Continuous coil eliminates butt joints around gunwale, with improved bending characteristics and the ability to cold form Vacuum calibration tooling allows for tighter dimensional tolerance and sizing consistency High-density core offers improved shock-absorbent impact resistance Made in the USA 5-year limited warranty Specifications: Color: Frosty white Length: (feet) 60' Insert: S11-4511 required (sold separately) Drilled and countersunk for #8 screw on 8-inch centers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

TR3 Spring Loaded Safety Pin - 1/4" ShackleFeatures: Hitch pin lock for device locking safety Computer generated parts precision-cut from aerospace grade stainless steel plate Low friction, low effort lanyard-style release for maximum user safety All parts 100% stainless steel WARNING: This product can expose you to chemicals including Titanium dioxide which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

90° P-Trap Fuel Tank Vent -  Black with Black Vent HeadThis Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness eliminates the need for an anti-siphon loop in the vent hose. It requires a ¾-inch installation hole and can be used with a maximum hull thickness of 9/16 inches.  Features: Standard Mount - (inch) 5/8" I.D Hose Reliably helps prevent water from entering the fuel tank Still allows air to vent freely during normal sea conditions and washdowns This black vent with a black vent head meets ABYC standards *Compatible with Ethanol blended fuels. Quick Guide (pdf)

Read more less

Grabber Catch Latch - Side Mount - Black - Pull-Up Force 44N (10lbf)Features: Spring-loaded over-center latching One assembly includes catch and keeper Material and Finish: PC/ABS, black Performance Details: Operating temperature range: -30ºC (-20ºF) to 60ºC (140ºF) Flammability rating: UL94-HB Installation Notes: Orient keeper to latch. The arrow on the keeper should point towards the cam. Mount to door and adjust for smooth latching. Minimum distance from frame (or surface on which catch subassembly is mounted) to centerline of door hinge is 150 (5.9)

Read more less

Mechanical Hatchlifter 12" STK FastThe AV hatch lifters are electromechanical products, especially designed for marine use on pleasure boats. They allow full or partial opening and closing of heavy engine hatches, peak tanks, hatch beams etc. By activating a switch, it is possible to lift the hatch to any desired position from closed to full open; an internal self-locking mechanism will maintain the position preventing any accidental hatch closing. In case of a power failure, an emergency device allows for manual opening.The Uflex AV hatch lifters do not require any maintenance, are easy to install, and are made of materials resistant.Features: According to the load required, the AV hatch lifter can be mounted individually, or in twin-cylinder installations for heavier loads. It is also possible to install more than two AV actuators in multiple applications.  Maximum load for single installations: 1200N (120 kg - 265 lbs)  Maximum load for dual installations: 2400N (240 kg - 529 lbs)  Maximum load is recommended not to be exceeded.  Supplied with all mounting hardware.  Stainless steel telescopic ram for manual operation in case of emergency.  Available on request without a manual emergency opening device for high-performance boats.  Circuit breaker to stop accidental overloading of the system and electronic stop at the closed or fully open position.  IP 65 protection rated  Speed: 25mm/sec no load applied, 17 mm/sec maximum load  Current absorption in single installations: 10A at 12V, 5A at 24V  Current absorption in dual installations: 20A at 12V, 10A at 24V  AV 12VDC models are Ignition Protected. UL1500 - ISO8846 approved. Specifications: Volt: 12V DC Stroke: 300mm (12") Length A (full closed actuator): 677 mm (26.6") Ø External: 48 mm (1.9")

Read more less

0591 Vented Fill f/1-1/2" Hose - Straight Neck - ChromeChrome Plated Bronze Cap Black Polymer Body Straight Neck & Heavy Duty Stainless Steel Bead Chain Integral Tank Vent with Flame Arrestor and Anti Surge Valve (on diesel only) Deck Plate Key Not Required *Note: Consider using the Mounting Ring (Fig. 0540DPRBLK) for all installations. DP package includes mounting ring. Technical Information For Hose Size: 1-1/2" For Vent Hose: 5/8" Mounting Hole Dia.: 2-1/8" O.D. Flange: 3-3/8" Neck Length: 2-7/16" Screw Size: #8

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Non-Skid Color: White

Read more less

Bow Eye - Machined 304 Stainless Steel - 7/16" x 3-1/2"These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion-resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp ring-style stern eyes. Can be used in conjunction with Lift Eyes (048330 or 048350) for a more robust lifting assembly.Specifications:Threads: 1/2" NC

Read more less

Door Hinge - 1-1/2" x 3" - Investment Cast 316 Stainless SteelThese Door Hinges are constructed of corrosion-resistant investment-cast 316 stainless steel. Installs with six #10 FH fasteners (not included).Specifications:Fastener: #10 FH Specifications: Material: Stainless Steel Box Dimensions: 1"H x 2"W x 3"L WT: 0.2 lbs

Read more less

Screw-Out Deck Plate - Black - 5" Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Flex Vinyl Rub Rail Kit - Black with Black Insert - 50' - 1-1/4"Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guideFeatures: 1-1/4"H x 15/16"W x 50'L Black with Black Insert This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Surface Mount & Latch - Black Body, Chrome Handle, Offset Cam Bar, 3/4" - 2-3/8"Features: Polymer body T Handle Stainless Steel Stem Lock with 2 keys Offset cam bar Easily Installs in a 2-1/2 Inch Diameter Hole for Mounting Surfaces 1/8 to 3/4 Inch Thick The T - Handle drops down flush in either the open or closed (180x Rotation) position. (except with the offset cam bar positioned upward) The rubber seal & boot under the T - Handle seals the lock cylinder preventing water intrusion Specs: Face Plate Diameter: 3" Body Color: Black Handle Color: Chrome Adjustment Cam Bar Inches: 3/4 - 2-3/8"

Read more less

2" Rub Rail End Cap - WhiteComplete your Rub Rail installation with our Rub Rail End Caps - available in white nylon for a secure fit.Features & Benefits: Cap the rail at the stern of the boat for a finished look Ensures inserts stay intact Sold individually Durable white nylon 5-year limited warranty Specifications: Width: 2" Color/Finish: White Profiles: V11-2423 & V11-3426

Read more less

Flush Pull Latch - Push To Close - Medium - BlackSpecifications: Material: Plastic Material Grade: PC / PBT Blend Finish: Natural Color/Appearance: Black Access Restriction: No Restriction Grip Range: 25.000-26.000 mm (0.98-1.02 in) Panel Thickness: 2.000-7.000 mm (0.08-0.28 in) Profile: Low Profile Size Series: Medium Size Southco offers modifications to our standard products, explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.

Read more less

70' Flexible Black Rub Rail Insert 1-3/16" x 1/2"Hide Rub Rail fasteners and give your boat a clean look with the 1-3/16" X 1/2" Flexible Vinyl Insert.Features: For use with flexible Rub Rail Soft PVC insert provides cushion effect to absorb impact Made in the USA 5-year limited warranty Specifications: Length: 70' Color: Black Description: Flexible Vinyl, Black Rub Rail Insert, 1/2"W x 1-3/16"H x 70'L This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

PSS Shaft Seal 1-1/2" Shaft 2-1/2" TubeShaft Diameter: 1-1/2"Stern Tube Diameter (D): 2-1/2" to 2-5/8"Total Length (A): 9.175"Total Length (compressed) (Compressed A): 8.175"Rotor Diameter (B): 3.75"Carbon Cuff Diameter (C): 3.25"Stern Cuff Length (E): 2"The PSS Shaft Seal is the number one selling marine mechanical seal worldwide and is installed as standard equipment by many of the worlds most reputable boat builders / yards. The PSS Shaft Seal is also recognized as the premiere retrofit (aftermarket) seal on the world market. Certified by Bureau Veritas, ABS & Rina: Boat builders / yards recognize the advantages and value of installing the PSS as it eliminates the maintenance, constant adjustment & cost associated with traditional packing type glands. Aside from these benefits, the PSS Shaft Seal helps to eliminate water in the bilge (100% water tight) & wear to the propeller shaft. The PSS Shaft Seal can be easily retrofitted and is available for shafts ranging from 3/4" (20mm) to 6" (150mm).The PSS Shaft Seal is a mechanical face seal that is created between the flat surfaces of the rotating stainless steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the vessels stern tube with hose clamps and the carbon flange is attached to the front side of the bellows with hose clamps. The stainless steel rotor is fit on the shaft in front of the carbon flange. The stainless steel rotor is used to compress the bellows before the collar is secured to the shaft with set-screws. This compression (pre-load) maintains contact between the faces and allows the PSS to compensate for the thrust from the propeller. The carbon flange is bored larger than the shaft diameter allowing it to "float" around the shaft and thus compensate for most misalignment and vibration problems. The stainless steel collar is sealed to the shaft by two o-rings that are recessed into the bore of the collar. These o-rings rotate with the shaft and stainless steel rotor and do not experience wear during operation.**As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. PYI suggests as preventative maintenance that the PSS bellow be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced."Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate rubber deterioration, as will an ozonater.The Maintenance Kit includes the items you need to properly maintain your PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings, five (5) set screws, four (4) new hose clamps and an allen key. Brochure (pdf)

Read more less

170 Finger Grip Destroyer 5-Spoke 15.5" Stainless Steel Cap 3/4" Tapered Shaft with KnobThe Destroyer Wheel is a 5-spoke stainless steel steering wheel that can be a great addition to any boat. This specific steering wheel comes with a fitted black center cap.Features: Destroyer Wheel 6 spoke Standard rim Back center cap 10-degree dish Fits a 1" straight shaft

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Smooth Color: Beige

Read more less

Stud Catch Length: 2-1/4" Width: 7/16" Fastener: #8(4) Material: Brass Quick Guide (pdf)

Read more less

14" x 24" Flush Hatch White - ASA Material - Acrylonitrile Styrene AcrylateFeatures: 1/2” Closed Height Weather-tight Seal Opens full 180 degrees Nothing to Snag Lines One-Hand Operation Mounts Vertical or Horizontal UV Stabilized Material Invisible Fasteners Color: White Non-Skid Diamond Pattern Surface

Read more less

Teak Drinkholder with Removable Cockpit Table Top - Holds 4 GlassesFeatures: Table Top Dimensions: 16" x 24" Drinkholder holds four glasses Can be used without table Fits all 7/8" or 1" diameter tubing pedestal steering guards Easily removed

Read more less

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: White Color: Beige

Read more less

TCL4 9" Locker Door - BlackKeep storage areas dry with this tried, tested, and trusted black Whale locker door/deck hatch.Features:Reliable watertight sealMeasurements: Diameter: 228 mm (9 in.) Aperture: 179 mm (7 in.) Materials: Body: Polycarbonate Locking Ring: Acetal  Seal: Nitrile Specifications: Color: Black Box Dimensions: 2"H x 10"W x 10"L WT: 1 lbs UPC: 766478400000

Read more less

Slam LatchIncludes Striker PlateStainless SteelFlange:2-3/8"Depth:1-1/2"Fastener: Provided

Read more less

Compression Handle Replacement KeyMolded Key for Hexagonal Lock Fits: 6136, 6236, 6738, S-0251, S-0336, S-0436, S-0536.

Read more less

Dish/Cup Holder Holds 4 each of plates and cups 19-3/4" L x 4-1/4" D x 11-1/2" H

Read more less

Cowl Ventilator(0870) Chrome Plated Zinc Alloy Cowl with Black PERKO-KOTE Base 3" Duct Thread into Neck, Hose Clamps Not Required Cowl Opening Square: 7-1/3"

Read more less

Flex Vinyl Rub Rail Kit - Black with Black Insert - 70' - 1-1/16" x 11/16"Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide.Features: Rub Rail Kit Vinyl 70' 1-1/16" x 11/16" Black with Black Insert This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Pipe Deck Fill - 1-1/2" - WaterFeatures: 316 S.S. 1-1/2" Pipe Water Deck Fill with Key Chain included Flange: 3-3/8" Fastener: #10 (3) Weight: 20oz Replacement cap & chain is P/N 6074

Read more less

Flush Mount 2-Pin HingeLength:3"Width:1-1/2"Depth:3/8"Fastener:#8(6)Material: 304 Stainless Steel Specifications: Material: Stainless Steel Color: Stainless Box Dimensions: 1"H x 2"W x 3"L WT: 0.17 lbs UPC: 725060370015

Read more less

TCL2 9" Locker Door - Diecast AluminumKeep storage areas dry with this tried, tested, and trusted aluminum Whale locker door/deck hatch.Features: Robust aluminum construction with a locking lever  Ideal for harsh marine environments Measurements: Diameter: 228 mm (9 in.) Aperture: 179 mm (7 in.) Materials: Body: Diecast aluminum alloy Seal: Nitrile Specifications: Color: Aluminum Box Dimensions: 3"H x 9"W x 9"L WT: 2.2 lbs UPC: 766478200006

Read more less