Sun Cover for HOOK2 4" SeriesKeep your HOOK2 safe from dirt and debris with a Lowrance Sun Cover Specifications: Type: Covers Box Dimensions: 1"H x 5"W x 7"L WT: 0.2 lbs UPC: 9420024168189

Read more less

WS320 Wireless Wind Sensor OnlyA high precision wireless wind sensor designed for cruising and club racing sailors. The WS320 wireless wind sensor offers a high performance solution, with exceptional data accuracy and improved aerodynamics which is easy to install.The WS320 wireless wind sensor is the perfect solution for any sailor looking to get accurate and fast wind data to your instruments, which is easy to install, and is without cables.High PerformanceDesigned to provide highly accurate wind data in all conditions at all points of sail and heel. WS320 has been benchmarked against multiple sensors in over 500 individual wind tunnel tests.No Compromise WirelessEasy to install and light-weight, ideal for smaller boats – without compromising performance for wireless convenience. WS320 has the same accuracy (both wind angle and wind speed) as the wired version, while outputting wind at a super smooth 5 times every second.ReliabilityAs the most exposed sensor on a yacht, the wind sensor – critical for instruments and autopilot steering – must meet an exceptionally high standard. In addition to standard testing WS320 sensors have been subject to combined field tests of over 200,000 hours.Features: Easy installation Smart rechargeable power management Superior data accuracy and aerodynamics Sensor quality and reliability

Read more less

WS310 Wired Wind Sensor OnlyA high precision wired wind sensor, designed for cruising and club racing sailors. The WS310 wind sensor offers high performance data accuracy, with improved aerodynamics suitable for all yachts.The WS310 wind sensor is the perfect solution for any sailor looking to get accurate and fast wind data to your instruments from a wired wind sensor. High PerformanceDesigned to provide highly accurate wind data in all conditions at all points of sail and heel.ReliabilityThousands of hours of real-life testing have proved this instrument to be exceptional in all conditions. Providing fast and accurate data at all times*Requires WS300 Cable (20, 35, 50 or 80m). WS310 (wired) Interface required if connecting to a NMEA 2000 network.Features: Superior data accuracy and aerodynamics Sensor quality Unbeatable reliability Specifications: Waterproof rating: IPx6 (spray), IPX7 (immersion) Weight: 0.66 lbs Power consumption typical: <0.1 W Supply voltage: 12V DC (9-16V DC) Operating temperature range: 5 degrees F to 131 degrees F Warranty period: 2 years Storage temperature range: 4 degrees F to 140 degrees F Dimensions WxHxD: 20" x 13" x 2" Approvals compliance: IEC/EN 60945 NMEA 0183 Sentences supported: MWV, R at 10Hz

Read more less

A2004/AP48 SuncoverMake sure your Simrad A2004/AP48 continues to work like new by protecting it with the Simrad Suncover.  The cover is UV ray resistant. Specifications: Type: Covers Box Dimensions: 1"H x 5"W x 7"L WT: 0.2 lbs UPC: 9420024167267

Read more less

Suncover for NSS9 evo3Make sure your NSS9 evo3 continues to work like new by protecting it with the Simrad 9" Suncover. This sturdily made cover fits your system perfectly. It protects your unit from overexposure to sun glare during long boat trips. The cover is UV ray resistant. Specifications: Type: Covers Box Dimensions: 0"H x 7"W x 12"L WT: 0.45 lbs UPC: 9420024160879

Read more less

Edge Bezels NSS16 Evo3 & Zeus3 16 - PairFeatures: Edge Bezels for NSS16 Evo3 and Zeus3 16  Comes as a Pair

Read more less

Simrad Power Cable f/NSE NSS & StructureScan 3D, GO7, GO9, GO124 pin conn. to 4 bare wires for power in - power control bus and external alarm - 6.5 ft (2 m). Specifications: Type: Power Cords Box Dimensions: 1"H x 4"W x 5"L WT: 0.3 lbs UPC: 042194901145

Read more less

Honda 8, 9.9, 15 & 20 (2001-Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

GMI/GNX Protective CoverUse our protective cover to protect your device from the harsh marine environment when not in use.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Covers Box Dimensions: 1"H x 6"W x 7"L WT: 0.1 lbs UPC: 753759108649

Read more less

Mercury 8, 9.9 (2005-Present), Johnson Evinrude 9.8 (2013-Present) & Nissan/Tohatsu 8, 9.8 with Remote THTROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

C12x/e12x to Axiom Adapter Plate to Existing Fixing HolesPowder coated black to match the Axiom, this adapter plate is designed to enable a simple and stylish installation of Axiom 12″ multifunction displays in place of a C12x/e12x Series Display. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 13"W x 16"L WT: 0.4 lbs

Read more less

Weather Cover for Joystick Control UnitFLIR's Joystick Control Unit Weather cover is a protective covering for the Joystick Control Unit of your maritime thermal imaging camera. It is designed to protect your Joystick Control Unit (JCU) from the dangers of the open ocean. Built specifically for marine use, JCU Weather Cover has been designed by FLIR to guard against salty spray, moisture, and other irritants that could potentially damage your thermal camera's Joystick Control Unit. You should always put this thermal imaging accessory on your JCU when it is not in use to prevent possible damage. Keep it operating smoothly by using the FLIR Weather Cover.Features: Protective covering Protects the electronics of your Joystick Control Unit (JCU) Guards against moisture, salt and other irritants found in marine environments Specifications: Type: Covers Box Dimensions: 1"H x 3"W x 6"L WT: 0.2 lbs UPC: 812462020898

Read more less

RayNet(F) to RayNet(F) Port Connectivity - 400mmThe RayNet (F) to RayNet (F) network cable can be used to daisy-chain 2 adjacent RayNet devices together. It is also useful for joining two adjacent HS-5 Network Switches together on larger systems where multiple switches are necessary. This network cable is 15-inches (400mm) long.

Read more less

Black Suncover for i50, i60, i70, i70s, p70 & p70s (eS/AXIOM style)Sun covers for your electronics serve a very important purpose. When the equipment is not in use, they prevent UV damage to the screen and face of the unit. They also reduce the likelihood of screen damage and other surface damage. They are also the first defense line if something drops on the screen.Features: Black Raymarine instrument sun cover Protects instruments with square eS-style bezels Applications: Raymarine i50, i60, i70, i70s, p70 and p70s (eS / AXIOM style) *Note: For instruments using the a/c/e style rounded bezels, use A80357

Read more less

Suncover for Axiom 9Suncover for the Axiom 9 when bracket mounted. Not for Axiom Pro. Specifications: Type: Covers Box Dimensions: 1"H x 7"W x 10"L WT: 0.25 lbs UPC: 723193818398

Read more less

Paddle Wheel Kit for Raymarine ST40, 60, 60 PLUS, 365/470/750Kit contains: Paddle wheel Stainless axle  Rubber o-rings

Read more less

T005 Strap BracketFeatures: Light weight Easy to fit and remove Strong construction Bright painted finish

Read more less

M300 Right Angled Power Cable - 3MPower/data/video cable for M300C, M332, M364, M364C, and M364C-LR cameras.FLIR Marine camera systems operate on 12V or 24V DC power. To support flexible installations, FLIR offers a variety of replacement and extended-length power cables. Specifications: Type: Cables Box Dimensions: 2"H x 9"W x 10"L WT: 1.1 lbs UPC: 723193841143

Read more less

PoE Injector 12-24V 5GBPower supply, power over Ethernet (PoE) injector. Compatible with FLIR joystick control units, Raymarine network cameras, and other devices requiring PoE power. This PoE injector is compatible with both 12- and 24-volt DC systems for maximum flexibility. This device also supports Gigabit speed networking to ensure the fastest connectivity possible through its standard RJ-45 data port.

Read more less

RCR-1 Remote MicroSD Card ReaderRaymarine's RCR remote SD card reader allows for an additional SD card to be used for charts, software updates, or for data storage. With the flexibility to be mounted anywhere on your console, the waterproof RCR also offers a USB socket.

Read more less

RMK-10 System Remote Control Portrait KeypadRemote Keypad is an ultra-compact wired keypad accessory that provides full control of aSeries, cSeries, eSeries, eS Series and gS Series Multifunction Displays (MFDs) from any mounting location.The fully backlit RMK-10 includes dedicated keys for home, menu, zoom in/out, window control, waypoint management, power/brightness, as well as Evolution autopilot control.RMK-10 also features the same multifunction rotary controller with the integrated cursor pad found on eS Series multifunction displaysThe RMK-10 can be surface-mounted or flush-mounted, and is available with key mats for horizontal or vertical installation. This gives you the flexibility to install the RMK-10 just about anywhere.Utilising Raymarine’s RayNet high speed networking, the RMK-10 can be setup to control a single multifunction display, or multiple displays mounted at the same location. When controlling multiple displays on the same helm, the RMK-10 provides seamless control across all of the displays.When used with aSeries or gS Series Multitouch displays, the RMK-10 brings full HybridTouch™ control capability to these products. The RMK-10 integrates seamlessly with the LightHouse II user interface and allows the navigation system to be operated solely by touch, by keypad, or any variation between.Mounting OptionsThe RMK-10 is the perfect solution for controlling MFD’s mounted beyond arm’s reach, or in overhead electronics boxes. Instead of reaching for the MFD, the RMK-10 brings the system’s controls to you.For the ultimate in convenience, mount the RMK-10 in the arm of your favorite helm chair. Now it’s easy to sit back, relax and enjoy the ride on autopilot, while still being able to interact with your navigation system.RMK-10 is also great for bringing remote system control to secondary monitors and onboard LCD TV sets connected to the VGA or HDMI output of select e-Series, eS-Series and gS-Series displays. Now you can see and control your Raymarine navigation system from a below-deck navigation table, salon or stateroom.Specifications: PoE classClass 1 Nominal supply voltage12 / 24 V dc Operating voltage range10.8V dc to 31.2V dc Power consumption3.84W Environmental: Operating temperature-25ºC to +55ºC (-13ºF to 131ºF) Storage temperature-30ºC to +70ºC (-22ºF to 158ºF) Relative humidityMaximum 75% Waterproof ratingIPX6 Wired Connections: Network / power1 x RayNet connector | (gS Series - 1000 Mb/s plus PoE) | (aSeries , cSeries, eSeries - 100 Mb/s) Alternate power1 x power connector

Read more less

UC H7R2 Unit Cover for HELIX 7 G4 ModelsThe UC H7R2 is a silicone cover for select HELIX 7 models that help keep your fish finder protected when not in use. Features: Compatible with: HELIX 7 G4 and G4N models Color: Black Not for use while trailering the boat 1-Year Limited Warranty Specifications: Type: Covers Box Dimensions: 4"H x 10"W x 15"L WT: 1.35 lbs UPC: 082324056468

Read more less

EC M3 14W30 30' Transducer Extension CableFeatures: Engineered to high standards 30' Transducer Extension Cable High-grade design delivers extended lifespan Made with premium materials Specifications: Type: Extension Box Dimensions: 4"H x 8"W x 9"L WT: 2.4 lbs UPC: 082324054839

Read more less

DeviceNet (M) to ST-Ng (F) AdapterThis handy accessory will make networking Raymarine and 3rd party NMEA2000 devices much simpler. Using the adapters, you can instantly convert devices or spur cables from one connector system to the other.

Read more less

SeaTalkng to DeviceNet Female Adapter Cable - 1MAdapts SeaTalkng to NMEA2000 network.  Specifications: Type: Adapters Box Dimensions: 1"H x 8"W x 12"L WT: 0.2 lbs UPC: 723193783801

Read more less

RayNet (female) to RJ45 Male Cable - 3mRayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays.The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector.Features: 3m (9.84 ft.) RayNet to SeaTalkhs (RJ45) cable

Read more less

Spur CableRaymarine 5 meter Spur Cable for SeaTalkng

Read more less

UC H7 HELIX 7 Unit CoverThe UC H7 is a neoprene cover for HELIX 7 models that helps keep your fish finder protected when not in use.Features: Compatible with: All HELIX 7 Series Products Color: Black Not for use for while trailering boat. Note: Only for Gimbal Mount installations.  If HELIX 7 Series is mounted in-dash the unit cover will not fit 1-Year Limited Warranty WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Covers Box Dimensions: 3"H x 8"W x 9"L WT: 0.6 lbs UPC: 082324047176

Read more less

Minn Kota Ultrex QUEST Fit KitThis bracket kit is needed to install a FORESIGHT Forward-Facing Sonar Mount on a Minn Kota Ultrex or the Ultrex QUEST trolling motor.Specifications: Weight: 2 lbs. Dimensions: 8 x 8 x 3 inches Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 10"W x 10"L WT: 1.45 lbs UPC: 854127007240

Read more less

Pole Mount f/GS25, ZG100 & POINT-1 GPS AntennasPole mount for GS25, ZG100, POINT-1 GPS and heading sensor

Read more less

Wireless RemoteThe TAILFIN wireless remote features a vibrant orange faceplate, a protective cover, a long battery life, and a comfortable lanyard. Multiple remotes can be programmed into the system at the same time, so grab a spare or two. NOTE: This remote is only for TAILFIN Kicker Steering Systems. Replacement remotes for the older Python systems will be part number #1152.Features:Made in the U.S.A.Specifications: Weight: 1 lbs. Dimensions: 4 x 4 x 2 inches

Read more less

Tilt Mount f/STRIKER™ Plus 9svSecure your compatible marine device with this mount, featuring tilt capabilities for optimum viewing.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 4"W x 10"L WT: 0.5 lbs UPC: 753759186937

Read more less

170 2.25" Ball Mounting System for 10-12" ScreensComponents:  171 2.25" Ball System Arm 175 2.25" Ball System Top Plate for 10-12" Screens 176 2.25" Ball System Base 171 2.25" Ball System ArmFeatures: Engineering-grade nylon and Stainless steel construction Compatible with all 2.25″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 2.25″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends For 10-12″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately) 175 2.25" Ball System Top Plate for 10-12" ScreensFeatures: Engineering-grade nylon and Stainless steel construction Compatible with all 2.25″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 2.25″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends For 10-12″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately) 176 2.25" Ball System BaseFeatures: Engineering-grade nylon and stainless steel construction Compatible with all 2.25″ Scotty ball system accessories Equipped with the classic Scotty 241 hole pattern, allowing it to be paired with these options: 449 Portable Clamp Mount 320 Adaptable Rail Mount 242 Rail Mount Adapter 340 Track Adapter 441 Backing Plate 341 Glue-On Mount Pad28 Gimbal Mount Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 7"W x 8"L WT: 2.4 lbs

Read more less

165 1.5″ Ball System Top PlateFeatures: The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 1.5″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends 2-1/4” square fixed base For 7-9″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners(sold separately) Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 5"W x 12"L WT: 0.5 lbs UPC: 062017001654

Read more less

Eagle 7" SuncoverThis 7-inch cover is designed for Lowrance Eagle displays.Features:Protects the marine environment Specifications: Type: Covers Box Dimensions: 2"H x 8"W x 12"L WT: 0.45 lbs UPC: 9420064135165

Read more less

Yamaha® Engine Bus to J1939 Adapter Cable - 3'Connect your J1939 equipped GPSMAP® 7400/7600/8400/8600 series chartplotter directly to your Yamaha engine bus multi-hub to bring Yamaha’s fully-integrated boat control system and custom touchscreen user interface to your Garmin installation.Pigtail Bus Wire Reference:Yamaha Part Number - Description 6Y8-82521-01-00 - 1 ft. Pigtail Bus Wire 6Y8-82521-11-00 - 2 ft. Pigtail Bus Wire 6Y8-82521-21-00 - 3 ft. Pigtail Bus Wire 6Y8-82521-31-00 - 6 ft. Pigtail Bus Wire 6Y8-82521-41-00 - 9 ft. Pigtail Bus Wire 6Y8-82521-51-00 - 12 ft. Pigtail Bus Wire WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

OP-55 Landscape Remote Control for NEON™ OS MFDsFeatures: Control up to six compatible multifunction displays running NEON™ OS High-quality aluminum control dial with built-in cursor functions Customizable key for more flexibility Low-profile dash mount, or total flush-mount with optional bracket Integrated high-decibel speaker for critical alarms Landscape orientation (portrait version also available) Narrow design perfect for helm chair arm mounting Compatible with Simrad® NSO® 4, NSS® 4 and NSX® / B & G® ZEUS® SRX, ZEUS® SR and Zeus® S Manage Multiple DisplaysNetworked with a single NMEA 2000® connection for both power and control, one OP55 Remote Controller can operate up to six networked multifunction displays. Integrated LED indicators clearly show which display is selected, while a dedicated button cycles quickly through the available displays.Controls Optimized for NEON™ OS DisplaysThe OP55 Remote Controller features a keypad specifically designed to operate NEON™ OS multifunction displays efficiently and reliably in all conditions. The controller’s high-quality aluminum dial features a knurled edge for precise control and built-in cursor functions for easy on-screen navigation. An OP55 can be used to add classic controls to a touchscreen system or to give one station total control over multiple Simrad® displays.Easy Mounting in Horizontal or 'Landscape' OrientationThe landscape OP55 is ideal for installation beneath the NEON™ OS touchscreen, allowing easy control while keeping hands and arms from obscuring the display. Dash mounting provides a slim eight-millimeter profile, while an optional bracket allows total flush-mount installation.Custom Key ButtonA fully programmable button that gives you fast access to the functions and apps you use most. Set different actions for single, double, or long presses so you can launch key features instantly with one simple control.In the Box: OP-55 Controller N2K T-Joiner OP50/ZC2 Suncover OP50/ZC2 Dash Mounting Kit

Read more less

N2K Starter KitNMEA 2000 Network Starter Kit Includes: Network power cable 4.5M (15') N2K cable 3 x T-connectors 2 x network terminators Specifications: Type: Misc Box Dimensions: 3"H x 6"W x 9"L WT: 1.2 lbs UPC: 9420024118382

Read more less

Halo20 Ethernet AdapterCable, RJ45 To 5 Pin,1.5m Specifications: Type: Adapters Box Dimensions: 1"H x 6"W x 8"L WT: 0.2 lbs UPC: 9420024173947

Read more less

Edge Bezels NSS9 Evo3, Evo3S, Zeus3 9 & Zeus3S 9 - PairFeatures: Edge Bezels for NSS9 Evo3, Evo3S, Zeus3 9 & Zeus3S 9 Comes as a Pair

Read more less

Power cable for all HDS units: HDS-10, HDS-10m, HDS-5, HDS-5m, HDS-5x, HDS-7, HDS-7m, HDS-8, HDS-8m, Elite-7 Hdi Series Specifications: Type: Power Cords Box Dimensions: 3"H x 5"W x 10"L WT: 0.35 lbs UPC: 042194533537

Read more less

Wind Speed Cups for All ModelsWind speed cup spare for all models wind sensors. Includes mounting nut.

Read more less

GPS Antenna GS25The Simrad GS25 GPS antenna is the ideal GPS for any navigator that requires extremely accurate and rapid vessel position and speed updates. Unlike other position-only antennas, the GS25 provides magnetic heading for accurate boat direction at any speed and for radar/chart overlay. The GS25 easily connects to any Simrad NS Series multifunction display or any NMEA 2000® network. It is fully waterproof and can be pole or surface mounted on any vessel. *Please note this product is not suitable for use with MARPA or autopilot systems which require a rate compass such as the RC42. Features: High-Speed Position Update Rapid Signal Acquisition Consistent Position Accuracy Integrated Magnetic Heading GPS, WAAS, EGNOS and More Compact Design Fully Waterproof NMEA 2000® Connectivity Simrad Yachting Construction What's in the Box? N2KEXT-15RD 15ft Network Extension Cable Pole Mount GS25/ZG100/POINT-1 N2K-T-RD Network T-Connector Specifications: Type: Antennas Box Dimensions: 4"H x 8"W x 11"L WT: 1.55 lbs UPC: 9420064118694

Read more less

OP-55 Portrait Remote Control for NEON™ OS MFDsFeatures: Control up to six compatible multifunction displays running NEON™ OS High-quality aluminum control dial with built-in cursor functions Customizable key for more flexibility Low-profile dash mount, or total flush-mount with optional bracket Integrated high-decibel speaker for critical alarms Portrait orientation (landscape version also available) Narrow design perfect for helm chair arm mounting Compatible with Simrad® NSO® 4, NSS® 4 and NSX® / B & G® ZEUS® SRX, ZEUS® SR and Zeus® S Manage Multiple DisplaysNetworked with a single NMEA 2000® connection for both power and control, one OP55 Remote Controller can operate up to six networked multifunction displays. Integrated LED indicators clearly show which display is selected, while a dedicated button cycles quickly through the available displays.Controls Optimized for NEON™ OS DisplaysThe OP55 Remote Controller features a keypad specifically designed to operate NEON™ OS multifunction displays efficiently and reliably in all conditions. The controller’s high-quality aluminum dial features a knurled edge for precise control and built-in cursor functions for easy on-screen navigation. An OP55 can be used to add classic controls to a touchscreen system or to give one station total control over multiple Simrad® displays.Easy Mounting in Horizontal or 'Landscape' OrientationThe portrait OP55 is perfectly suited to mounting in the arm of a helm chair, with its narrow design and side-entry cable. Dash mounting provides a slim eight-millimeter profile, while an optional bracket allows total flush-mount installation.Custom Key ButtonA fully programmable button that gives you fast access to the functions and apps you use most. Set different actions for single, double, or long presses so you can launch key features instantly with one simple control.In the Box: OP-55 Controller N2K T-Joiner OP50/ZC2 Suncover OP50/ZC2 Dash Mounting Kit

Read more less

Suncover for Elite-7 Ti SeriesSuncover for the Lowrance Elite-7 Ti Series Chartplotter/Fishfinders. Specifications: Type: Covers Box Dimensions: 1"H x 6"W x 9"L WT: 0.4 lbs UPC: 9420024148518

Read more less

12" Protective Cover - PlasticKeep your compatible GPSMAP device safe from the harsh marine environment, when not in use, with this plastic protective cover.Compatible Units: 8412/8412xsv 8612/8612xsv WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Covers Box Dimensions: 1"H x 9"W x 12"L WT: 0.53 lbs UPC: 753759219123

Read more less

Camera Coax Cable - 15MAdd additional length for installations with this 15M camera coax cable.

Read more less

Second Station Mounting Kit f/echoMAP™ 70dv/70s, GPSMAP® 741/741xsMount any additional echoMAP™ or GPSMAP® on your boat with this second mounting station. Also includes a wiring harness to power your compatible device and connect to an optional NMEA 0183 network.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less