NMEA 2000® Male Terminator Standard NMEA 2000® Male Terminator to be used with CAN BUS, Acqualink and OceanLink Gauges and Equipment.*Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

LAN Cable - 20MSpecifications: Length: 20M LAN Cable

Read more less

RSW Wired - Smart Performance Wind Transducer - Short Arm with 30M CableThe RSW Wired, Smart Wind transducer is a professional-level wind sensor designed to deliver highly accurate calibrated wind speed and direction data. Supplied with a 30-meter Smart Wind mast cable as standard.Install & Go!Raymarine Smart Wind technology delivers expert-level accuracy without the need for additional, expensive processors or extensive calibration and set-up. Finely TunedThrough rigorous wind tunnel testing, we've fine-tuned and balanced the instrument to ensure that data from the masthead is accurate and consistent.Sail SmarterTrusted, high-accuracy True Wind data combined with the Alpha Performance Displays and Axiom Chartplotters let you sail smarter.Specifications:Length     Wind transducer (including cable): 657.762 mm (25.90 in) Wind transducer (excluding cable): 540.712 mm (21.29 in) Wired gateway: 155.61 mm (6.13 in) Width     Wind transducer: 46.96 mm (1.85 in) Wired gateway: 47.38 mm (1.88 in) Height     Wind transducer: 305.86 mm (12.04 in) Wired gateway: 30.61 mm (1.21 in) Power Nominal supply voltage: 12 V dc (via SeaTalk NG) Operating voltage range: 9 V to 16 V dc Power Consumption: < 100 mW Fuse rating: Ensure that the SeaTalk NG backbone is protected by a 5 A fuse NMEA 2000 LEN (Load Equivalency Number) - based on nominal 9 V rating: 1 Environmental Operating temperature range: -25°C to +55°C (-13°F to +131°F) Storage temperature range: -30°C to +70°C (-22°F to +158°F) Relative humidity: Masthead: 100%/Below deck: up to 93% @ 40°C Waterproof rating: Wind transducer: IPx6/IPx7/Wired gateway: IPx3 Wind: 115 mph (185 kph) Vibration: EN 60945:2002 (exposed) What's In The Box? No.10 x 3/4" self tapping screws x 4 (for mounting the wind transducer) No.7 x 3/4" self tapping screws x 2 (for mounting the gateway) 40 mm (1.57 in) heat shrink tube (required to insulate ground wire when shortening the mast cable) Ring crimp terminal (required for additional ground connection when the gateway is not mounted on a metal surface) Mast cable, 30 m (98.43 ft) reel Documentation Wind transducer Smart wind-wired gateway SeaTalk NG to DeviceNet adaptor cable, 120 mm (4.72 in)

Read more less

Engine Oil Temperature Sensor - 1/2"-14NPT Thread - 150°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.Features: Function - Oil temperature, coolant temperature Length - 28.5mm (1-1/8") Thread - 1/2"-14NPT Calibration - 150°C Measurement Range - 150°C Output Signals - Resistive IP67 Insulated ground pin Quick Guide (pdf)

Read more less

AIS100 Receiver (USB)This value priced, entry level AIS receiver is Digital Yacht's most cost effective solution for adding AIS to your PC. Featuring the same dual channel receiver as the AIS200 Pro, but without the NMEA 0183 output and multiplexer, there is no compromise on performance and the AIS100 will out perform all other, inferior, single channel receivers.For use with any AIS compatible PC navigation software, such as the latest SmarterTrack, MaxSea, Nobeltec, SeaPro and RosePoint applications. Connected to an existing VHF antenna (via a splitter) or to a dedicated AIS antenna, you can receive all AIS targets within 20 miles of your boat. Low cost entry level AIS receiver High performance dual-channel AIS receiver for use with AIS compatible PC navigation software USB Interface for simple Plug and Play connection to a PC Requires VHF antenna or dedicated AIS antenna (available as optional accessory) Easy to install IP54 black box solution Specifications: Antenna Included: No AIS Class: Both A & B Display Included: No Function: Receive Only GPS Included: No Box Dimensions: 2"H x 4"W x 5"L WT: 0.3 lbs UPC: 738435472399 Quick Guide (pdf)

Read more less

InfoLINK BBWX4 Satellite Weather ReceiverThe BBWX4 delivers live, up-to-date weather information and forecasting, providing peace of mind no matter when or how your customers are using their boats within the SXM satellite footprint. Weather information is obtained from the industry's leading experts and is delivered via digital receiver through SiriusXM's Marine Weather services (Marine Coastal and Marine Offshore packages). Boaters will also have access to their favorite SiriusXM Radio channels when connecting the BBWX4 to their TZtouch2 MFD.Receive high-quality, comprehensive weather information and forecasting that can overlay onto both raster and vector charts. Boaters will have access to premium weather content, such as current weather reports, NOWRad® nationwide high-resolution Weather Radar imagery, and high-resolution Sea Surface Temperature images that can help fishermen locate hot spots. They'll also be able to view other critical information, such as tropical storm tracks, lightning strikes, even Great Lakes forecasts, and more! Canadian boaters can also access these features throughout much of Canada. Visit the SiriusXM website for a comprehensive listing of their Marine Service packages and coverage area.Features: Compatible with NavNet TZtouch v6.01 software (late February) and TZtouch2 software v6.21 (mid-February) - Not compatible with prior NavNet generations Weather and Radio capabilities interface seamlessly with TZtouch2 TZtouch (1st gen.) provides SXM Weather only; Radio services are not supported Compact waterproof design (IPX6/7) - about half the size of the BBWX3 Animated NOWRad® Weather Radar, Instant Forecast Info Sea Surface Temp, Wind, Wave Height, Squall Lines, Buoy Reports and more Front LED indicator lights show Network and Power port status Dual voltage (12/24VDC) with low power consumption (less than 3W) The BBWX4 comes with all the necessary cables:  Power, audio, and network cables Shakespeare SiriusXM SR50 antenna 25-foot antenna cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

CVS-126Dual Frequency Color LCD Echo SounderThe SI-TEX CVS-126 Dual-Frequency (50/200kHz) Echo Sounder features a digital signal processor (DSP) for a clearer image that enhances fish targets in shallow and deep depths, plus auto function for the most reliable setting and best performance. Features: Digital 5.7" Dual-Frequency Color LCD Fishfinder a multi-conductor cable is supplied, used for power, and data output and input DSP technology for a clearer detailed image that enhances fish targets Digital signal processing State-of the-art digital signal processor offers advanced filtering capabilities Digital Filtering feature eliminates clutter by filtering out the noise to provide a clear detailed image that enhances fish targets in shallow and deep depths Making it easy to differentiate between baitfish, larger fish, schools of fish and the sea floor Sona-Tone Exclusive Sona-Tone identifies what's under your boat with different sounds for fish and schools of fish. So you will not miss any good opportunites even if you are away from the CVS-126 Automatic Functions For best performance the Auto Function mode chooses the most reliable setting for such functions as Gain, Range and Shift Optimum settings are continuously selected automatically (GAIN, RANGE, SHIFT) Fishing Hot Spots Leads you back to your favorite fishing hot spots or other previously saved positioning in memory with input from optional GPS sensor Store the Image YouStores up to 10 screen images in built-in memory for recalling later by "one-touch" Great for recalling a potential hot spot for review later Easy Operation Easy access to all system functions with simply arranged keypad, dedicated-functions keys, rotary-knob control of Gain/Selection and comprehensive on-screen menus Sunlight Viewable Brilliant 5.7" color LCD display with 8, 16, or 64 color levels and an anti-reflective coating for excellent readability in direct sunlight Specifications: Screen Size: 5.7" Transducer Type: Not Included Transducer Included: No Box Dimensions: 9"H x 11"W x 14"L WT: 5.55 lbs UPC: 010407320656 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

MA800 GPS Antenna for AIS TranspondersThe MA800 passive GPS Antenna for AIS transponder (P/No. X500.391) is compatible with all current Digital Yacht AIS Transponders (AIT2000/2500/3000/5000/CLA1000/CLA2000). It is therefore an ideal replacement antenna for many makes of GPS receivers and chart plotters.  You can also use it with the discontinued AIT250 and AIT1000. However, the physical size and shape are different from the original antenna.The base can be removed for puck mounting or with the base fitted, it can be attached to any 1” mounting accessory (available separately) for pole, deck, bracket, and rail mounting.It ships with a 33' cable terminated with a slim FME connector and FME-TNC adaptor.Specifications: Bolt holes: 5/16" diameter, 3" x 1-1/2" on center Special cable slot thus eliminating removal of most factory-installed connectors Standard 1 in-14 thread (male) Stainless steel Heavy-duty construction Specifications: Antenna Band: AIS Color: White Type: Antennas Box Dimensions: 2"H x 8"W x 9"L WT: 1.2 lbs UPC: 081159830373

Read more less

15" Great HawkFor boats from 8m to 20mThe Great Hawk is designed for Cruising and Racing yachts up to 20m. The Great Hawk vane arm is made from the same super tough nylon and the Reference Arms are made from glassed filled nylon for ultimate rigidity and UV protection. The precision balanced vane arm and Hawks "V" Jewel bearing surface gives instant response to shifts and gusts with minimal inertia. The Reference Arms may be preset at 55, 60 or 65 degrees or any angle you prefer and can be used for either upwind or downwind angles. The 5mm Aluminum support rod is strong enough to take normal wear and tear, but can be bent straight should it be knocked while the mast is being stepped or unstopped. The Great Hawk is easily removed from its mounting bracket with one screw and the mast bracket can be mounted vertically or horizontally. Specifications: Vane Arm length 38cm (15")  Overall height 29cm (11.4")  Overall weight 70 grams. Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 3"H x 5"W x 16"L WT: 0.5 lbs UPC: 652773100106

Read more less

AIS100 AIS USB Receiver with QMax Portable AntennaThis pack is perfect for PC-based navigation systems, with USB drivers for PC, MAC, and Linux. It also includes a portable VHF antenna.This bundle includes an AIS receiver with a VHF antenna. This value-priced, entry-level AIS receiver is Digital Yacht’s most cost-effective solution for getting AIS on your PC. The AIS100 uses true dual-channel technology – it will outperform all other, inferior, single-channel receivers. This version is self-powered from the PC or MAC so no additional DC power is required. It ships with a 25cm portable VHF antenna with a sucker cup style mounting – ideal for portable useSimple plug-and-play USB connection to a PC. It uses standard drivers built-in to Windows XP/Vista/7/8/10 and is automatically mapped to an available “virtual” com port, which your PC software can read. Also compatible with Mac OS X and all LINUX Kernels since V2.4.20.This is for use with any AIS-compatible PC navigation software, such as the latest SmarterTrack, MaxSea, SeaPro, Nobeltec, and RosePoint applications.The QMax is a compact 25cm VHF antenna with sucker cup-style mounting. This base-loaded 1/4 wave antenna, comes complete with an integral 4m (12ft) cable, fitted with a BNC connector and also a rubber suction cup for fast, easy mounting to any smooth horizontal surface.Features: AIS receiver with VHF antenna Low-cost entry-level AIS receiver High-performance dual-channel AIS receiver for use with AIS-compatible PC navigation software USB Interface for simple Plug and Play connection to a PC Supplied with QMAX compact 25cm VHF antenna with sucker cup mount Easy to install IP54 black box solution

Read more less

CLA2000 Deep Sea Class A AIS TransponderDigital Yacht’s CLA2000 is the ultimate SOLAS and inland waterway globally approved Class A AIS transponder. Water and weather proof to IP67, it has a full integrated 5” hi-res colour display supporting a wide range of functionality including electronic chart navigation with optional C-Map MAX charting and AIS target management.Proven, superior real world AIS message receive and transmit and message processing performance is delivered by advanced core SDR AIS technology. This state of the art technology ensures you see more targets, more of the time and at maximum range.The CLA2000 will find applications on SOLAS mandated vessels over 300GRT as well as workboats, rescue services, inland waterways users, RIBs, large yachts and any user wanting premium AIS performance and safety.The CLA2000 has optimised software for detecting AIS SART and MOB devices with a dedicated icon for this class of AIS. An automatic alarm is activated on detection of an AIS SART beacon activation. The target plot display will also calculate relative bearing of the device for easy visualisation of the target and rescue.The CLA2000 is fitted with a micro SD card reader located behind a waterproof cover on the front panel. This can support software updates, data logging of AIS and position data to a blank card as well as compatibility with C- Map MAX charting cards for optional detailed back ground charting.The CLA2000 has an integrated wireless interface for sending AIS and position data to smart phones, tablets, PCs and MACs for use with 3rd party charting and navigation apps. It supports client mode where it can connect to an existing wireless network or AP mode where devices can connect directly to the CLA2000. Up to 5 simultaneous/connected devices are possible.Features: Globally approved Class A AIS transponder High resolution, 800 x 480 pixel 5” colour display (MKD) with easy to use, fast user interface Bracket or flush mount – waterproof to IPX7 Integrated GPS with external antenna or utilise external NMEA feed (user selectable) 3 x NMEA 0183 interface (bi-directional for plotter, ECDIS, radar etc) 3 x sensor input ports (eg BlueBoard, external GNSS, gyro etc) NMEA 2000 interface Built in SD card slot for software updates, AIS data port logging or C-Map MAX mapping capability with optional C-Map data card Built in wi-fi for connection to iPads and tablets for wireless navigation Sophisticated AIS SART MOB alarm and display capability User programmable alarms for CPA and TCPA Advanced filtering of targets External alarm and remote silence switch capability Specifications: GPS Included: Yes Function: Receive/Transmit Display Included: Yes AIS Class: A Box Dimensions: 5"H x 10"W x 16"L WT: 6.25 lbs Quick Guide (pdf)

Read more less

NMEA 2000 terminator - femaleWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Female Data Interface: NMEA 2000 Box Dimensions: 1"H x 1"W x 1"L WT: 0.02 lbs UPC: 753759078171

Read more less

AIS700 Class B AIS Transceiver with Antenna Splitter**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**Click here to download form.The AIS700 from Raymarine is a Class B Automatic Identification System (AIS) transceiver designed for use with Raymarine multifunction navigation display systems.  AIS is an international marine navigation safety system that allows participating vessels to silently exchange key navigation information including vessel name, identification, course, speed and more.  AIS contacts can be displayed on Raymarine multifunction displays, chartplotters, radar displays and select instruments.  As a Class B AIS transceiver, the AIS700 not only receives broadcasts from other vessels, it also transmits your own boat’s information too helping you to be seen on other vessels’ systems.The AIS700 is engineered using the very latest SO-TDMA (Self Organized Time Division Multiple Access) networking technology which allows it to perform faster and at longer ranges than d speed over previous generation AIS products.  For ease-of-installation, the AIS700 has a built in VHF-band antenna splitter which allows it to share a single antenna with your current VHF radio.  AIS700 also has its own internal, dedicated 72-channel GPS receiver with external antenna as required by international standards.  AIS700 also supports both hardware and software-enabled Silent Mode.  This allows you to temporarily restrict broadcasting your vessels own data, while continuing to receive updates from surrounding traffic.  Silent Mode can be particularly useful when transiting waters where extra security is a concern, or even in competitive tournament scenarios when you might want to prevent other from finding out the location of the hot bite.  Normal AIS safety broadcasts can be easily reinstated with a few simple touches of the AIS controls in your Raymarine MFD, or with the flip of a switch for hardware-silenced systems.The AIS700 is super-compact for easy mounting inside your helm, in a service locker, or other out-of-the-way location.  It can connect to your other onboard electronics using the latest NMEA2000 networking.  AIS700 also has a built-in NMEA0183 multiplexer to assist in connecting it to older MFD’s and VHF radio systems.  AIS700 also has a built-in USB 2.0 connection that can be used to tie the transceiver into a computer or laptop running AIS compatible navigation software.  AIS700 has a Secure Digital (SD) memory slot that can be fitted with an owner-suppled flash memory card for continuous recording of the AIS data stream.  Features: Full transmit and receive AIS for enhanced situational awareness and safety Latest SO-TDMA networking for longer range and faster performance Built-in antenna splitter simplifies installation with existing VHF radio antenna NMEA2000, NMEA0183, PC and SeaTalkng Compatible Software or hardware switchable Silent Mode for enhanced security when needed In the Box AIS700 Class B AIS Transceiver with built-in VHF antenna splitter GNSS (GPS) Antenna, gasket and pole mount kit Power and data cable (2 meters) VHF Radio antenna interconnect cable (1 meter) DeviceNet to SeaTalk NG Cable (1 meter) Mounting Hardware Pro-AIS Programming Software CD-ROM Documentation kit This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: GPS Included: Yes Function: Receive/Transmit Display Included: No Antenna Included: No AIS Class: B Box Dimensions: 5"H x 9"W x 14"L WT: 3.85 lbs UPC: 723193822616

Read more less

Gateway Touchscreen DisplayNo more compatibility issues or complex setups. Xantrex Gateway gives you power at your fingertips to integrate, monitor, and control all your essential components — batteries, inverter/charger, and solar controller into one seamless system for effortless operation.Xantrex offers a complete energy system that includes easy-to-use connectivity. The Xantrex gateway provides a coordinated view and easy drill-down access to control and monitor your system as a whole rather than single separate components. Remote monitoring with WiFi and Bluetooth capabilities makes your life easier than ever before.Features: Replace multiple displays with one Error alerts to monitor performance Coordinated system control What's Included?Xantrex Gateway Touchscreen PanelHDMI and USB 39" (1.0M Cables)Specifications: Housing/Mounting System: ABS Plastic, Wall Mount 4 screws IP Rating: Indoor IP42 front; IP21 back Display Resolution: 1024 x 600 Weight: 0.8lb (360g) Dimensions: 7.2 x 5.5 x 0.975in (183 x 140 x 25mm)

Read more less

NMEA 2000 Backbone Cable - 10MAncor's NMEA 2000 Approved Backbone Cables offer connection to an NMEA 2000 tee connector. The yellow couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The backbone cables are available in four lengths from 0.5 meter (1.6 feet) to 10 meters (32.8 feet) to cover a wide variety of applications.Features: Color coded for easy installation and component identification Large 18 AWG power conductors to reduce voltage drop and provide better reliability for critical backbone cables NMEA 2000 Approved, 100 percent universal and compatible with other manufacturers' products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 10m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 3"H x 9"W x 10"L WT: 2.8 lbs UPC: 091887982251 Brochure (pdf)

Read more less

Gateway Communication DeviceXantrex Gateway allows you to conveniently monitor and control all your favorite Xantrex products via wireless Wi-Fi connection using your smartphone, tablet, PC, or the Xantrex Gateway Touchscreen Panel 808-0890. Whether it is configuring the transfer relay on your inverter, troubleshooting your inverter/charger, checking your battery status, or turning your inverter off to save power, Gateway helps you do it all. Monitoring and configuring settings on your Xantrex devices has never been this easy.Features: Save dashboard real estate in your RV or boat by monitoring and controlling all your Xantrex products on one device Connect to your Xantrex devices via smartphone/tablet/PC wirelessly with Xantrex Gateway Monitor the status of your devices, including current, voltage, and battery state of charge Configure settings such as the transfer relay, or enable/disable your inverter to save power

Read more less

NMEA 2000 6M Drop CableThis Digital Yacht cable is a 6m (20ft) NMEA 2000 drop cable made of metal connectors for maximum reliability. The drop cable allows users to expand the NMEA 2000 to whatever size is needed.*Digital Yacht “Drop Cables” can also be used as backbone cables and are easily connected to make any length of backbone cable required. Also, the total length of all drop cables must be less than 76m.Features: 6m (20ft) NMEA 2000 Drop Cable Standard “Micro C” connectors make it very easy for future network expansion Metal connectors improve reliability Waterproof rating IP68 Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 6m Box Dimensions: 2"H x 7"W x 10"L WT: 0.75 lbs UPC: 703791696352 Quick Guide (pdf)

Read more less

B951 Class B AIS Transceiver - 5W SOTDMA**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**Click here to download form.The B951 is a high-power (5W SOTDMA) Class B transceiver, delivering advanced performance and ultimate reliability through em-trak's next-gen technology. Small and durable, this trusted transceiver processes all AIS transmissions in real-time, with increased range and transmission priority so you always have the complete picture and the time to respond, even in the busiest waters.em-trak's flexible, intelligent connectivity means the B951 can be paired to any chart-plotter and its next-gen GPS receiver and the antenna are already integrated inside the device to provide best-in-class, ultra-low power consumption, and performance. em-trak's unique FLEXI-FIT® bracket system completes the package and ensures easy installation.Features: Certified AIS Class B – 5W SOTDMA Global certification - USCG / FCC / Canada / Europe SRT-AIS™ Transceiver Engine for superlative proven performance FLEXI-FIT™ bracket system for easy, convenient, and secure installation Internal high-performance GPS receiver and antenna (external antenna optional) Water, pressure spray, and damp proof (IPx6, IPx7 certified) Protected from vibration, shock, and extreme temperatures Small and lightweight Ultra-low power consumption – best in class NMEA 0183 & NMEA 2000 Automated health and performance monitoring Silent mode (transmit-off) function Enhanced RF screening to protect against electromagnetic interference Built-in power surge protection Physical & Environmental Specifications: Size (H x W x D): 150 x 115 x 45mm Weight: 375kg Operating temperature: -25°C to +55°C Storage temperature: -25°C to +70°C Ingress protection: IPx6 and IPx7 Electrical Specifications: Supply voltage: 12V or 24V DC Supply voltage range: 9.6V - 31.2V DC Average current (at 12V): 135mA Peak current: 2.5A Average power consumption (at 12V): 1.6W Galvanic isolation: NMEA 0183 inputs only, NMEA 2000, VHF antenna port Connectors: VHF antenna: SO-239 GNSS: TNC Power: 12-way circular multipole NMEA 2000: 5-way Micro-C connector USB: USB Micro-B Data Interfaces: NMEA 0183: 2 x bi-directional ports NMEA 2000: NMEA 2000 Ed 3.101, LEN=1 USB: PC virtual com port for NMEA 0183 data Standards Compliance: AIS standards: IEC 62287-1 Ed. 3, ITU-R M.1371.5 Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008 Environmental standards: IEC 60945 Ed. 4 Serial data interface standards: IEC 61162-1 Ed 5.0, IEC 61162-2 Ed 1.0 NMEA 2000: NMEA 2000 Ed 3.101 GNSS performance standards: IEC 61108-1 Ed 2.0, IEC 61108-02 Ed 1.0 GNSS: Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo) Channels: 72 Internal/external antenna: Internal or optional external antenna Time to first fix from the cold start: 26s VHF Transceiver: VDL access scheme: SOTDMA Operating frequency: 156.025MHz - 162.025MHz Channel bandwidth: 25kHz Receivers/transmitters: 2 x receivers, 1 x transmitter AIS receiver sensitivity (20% PER): -111dBm AIS transmitter power: 5W (+37dBm) User Interface:Indicators: Power, transmit timeout, error, silent modeIn the Box: 1 x AIS transceiver 1 x Power and data cable (2M) 1 x FLEXI-FIT™ mounting bracket Complete with screws & optional fixing tape This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: AIS Class: B Antenna Included: Yes Display Included: No Function: Receive/Transmit GPS Included: Yes Box Dimensions: 6"H x 7"W x 7"L WT: 2 lbs UPC: 672975210540 Quick Guide (pdf)Brochure (pdf)

Read more less

HDR 650 In-Dash Digital Depthsounder The HDR 650 In-Dash Digital Depth Sounder gives you instant, reliable digital depth readings, and offers customizable bezel and face colors to complement italled gauges. This unit comes packed with a transom mount transducer. Bezel colors included: White, Black and Chrome. Face plate colors included: White and Black.Highlights Easy to Install into Existing 2 1/8 inch gauge opening Completely waterproof Easy to read large, backlit LCD display for use at night Wires to Ignition Switch for Auto Power On Shallow and Deep Depth Alarms Reads in Feet Tracks Bottom Up to 70 MP Specs 1.25" LCD Display 200kHz operating frequency 600 ft depth Deep/Shallow water alarms WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Transducer Type: Transom Mount Shape: Round Screen Size: 1-1/4" Instrument Function: Depth Box Dimensions: 4"H x 7"W x 9"L WT: 1.6 lbs UPC: 082324034992 Owner's Manual (pdf)

Read more less

PC 11 Power CableFiltered power cable, 6 ft, waterproof. Used with all HELIX 9 Series, HELIX 10 Series, HELIX 12 Series, 800 Series, 900 Series, 1100 Series products, 797, 798. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 2"H x 7"W x 9"L WT: 0.3 lbs UPC: 082324508080

Read more less

FishPod® 10BX Boat Mount Bluetooth FishfinderTurn your Smartphone into a Boat Mount Fish Finder! This iOS and Android app-based SONAR device is a valuable addition to any tackle box. With over 20 years of marine electronics experience packed into this wireless Depth Sounder Module, you'll always know what lies beneath.Features: Bluetooth 5 wireless technology IOS and Android compatible One-Touch mode access VirtuView Mode FishScape™ FishScape™ HD Data mode FishTrax™ intelligent sonar Auto and manual depth range Bottom Lock Limitless display color picker Underwater VirtuView™ Waterproof DSM Algorithmic software Audible alarms Plug-N-Plau connectors Adaptable to any fishing style Shoot-Thru technology EasyTouch™ programming Status indicator Navigational data Water temperature display Displayed and supported in the USA Hassle-free repair or replacement for any damage, for any reason Specifications: Operating Temperature: 0160°F (-1871 °c) Depth Range: 1.5 ft (.5 m) 199 ft (60 m) Transducer Frequency: Dual 200 kHz Transducer Beam Angle: Dual 45-degree Bluetooth Version 5.0 What's Included? Quick Start Guide FishPod® Portable IOS and Android Software (free to download from the app stores) Choice of Transom of Thru-Hull Transducer Specifications: Transducer Included: Yes Transducer Type: Transom Mount Box Dimensions: 4"H x 7"W x 7"L WT: 2.4 lbs UPC: 818800003271 Brochure (pdf)

Read more less

FishPod® 5X Bluetooth FishfinderTake the guesswork out of fishing with our portable sonar fish finder.Turn your Smartphone into a Fish Finder! This iOS and Android app-based SONAR device is a valuable addition to any tackle box. With over 20 years of marine electronics experience packed into a castable, pocket-sized bobber, you'll always know what lies beneath. Real Sonar, Reel SimpleTurn your smartphone into an easy-to-use fish-finding device in seconds. The FishPod only takes one touch to set up to match your skill level. Anytime, AnywhereCast from the shore, attach it to your paddlesports equipment, fling it from your boat, or slip it into your pocket and take it on the ice. From the pond to the ocean, the FishPod is ready wherever you are.Fish At Your FingertipsOur software comes pre-programmed with 4 modes of operation, each one custom-tuned to meet the needs of each fisherman’s skill level. The FishPod app is available.Features: 4-Preset Operating Modes - Engineered to help you evolve your fishing by auto-adjusting screen settings to target fish by size, depth, or schooling. FishEcho™ - Tunes sonar in the water column to pinpoint the size and depth of fish while tuning out clutter, debris, and false echoes. TraxNut™ Mounting System - Allows attachment to any 1/4 x 20 mounting bracket and expandability to any fishing platform. BottomScan™ - Adjusts bottom contour and composition readings to decipher between vegetation and soft / hard seabed. Vertical Flasher - Amplifies the most recently received sonar echoes making them easier to track. Great for ice fishing!

Read more less

Kronos 4" Tachometer with Hourmeter - 7,000 RPM (Gas - Outboard)Polished Stainless Steel bezel, flat glass lens, perimeter lighted spun aluminum dial with Gold and Black graphics. Gold increments and Logo on dial are Embossed.  All instruments include two piece Newport pointer with White hub. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed above.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.4" - Hole size: 3.375" (85mm)Specifications: 7 character LCD display 0-999999.9 Hours Flat Scratch Resistant Lens Polished Stainless Steel bezel LED Illuminating around the Perimeter of the Dial Newport style White Pointer Factory P/N TCH305*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer w/Hourmeter Series: Kronos Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Set: No Box Dimensions: 5"H x 5"W x 6"L WT: 0.7 lbs UPC: 759266390409 Quick Guide (pdf)

Read more less

PilotLINK2 Class A Pilot Plug WiFi InterfaceThere are well over 100,000 Class A AIS systems installed on vessels globally. While the latest Class A AIS transponders (like the Digital DeepSea CLA2000) already have a wireless interface incorporated for iPad and tablet connectivity, many systems just use a standardized “Pilot Plug” wired interface. This Amphenol standard multi-pin design allows NMEA AIS and GPS data to be accessed from the transponder and pilots and delivery captains would use a simple USB interface cable for their personal PC-based ECDIS system. However, more and more captains now choose to use an iPad or tablet so need wireless connectivity.PilotLINK2 allows these Class A transponders to interface with the latest range of mobile devices including iPhones, tablets, and PCs/MACs. Applications range from maritime pilots to survey ship charter users who may want access to the ship’s AIS and GPS data.Features: Connects to any standard “Pilot Plug” connector USB powered for easy portability power from any USB source, adaptor, or power pack Creates secure password protected wifi network Can also join another wifi network if preferred Easy web interface with useful diagnostics display and Class A static, dynamic, and voyage data displays Works with 100’s apps iSailor, Navionics, iNAVx, NavLINK, TZ iBoat, Imray, NV Charts, AquaMaps, Weather 4D, etc TCP/IP and UDP protocols supported The raw data log function InterfaceSet up of PilotLINK is simple using any web browser on the connected device. View data, set up wireless passwords or join another wireless network and also view Class A AIS status. Your favourite apps connect using TCP/IP or UDP protocols.The data monitor shows a list of raw NMEA data. You can also log this data for analysis if required. Brochure (pdf)

Read more less

12V Non-Fused Multi-Connection SystemWith more and more electronics being used in boating, this product allows up to four electronics or accessories to be connected to a single battery easily and correctly every time. Do it yourself.Depth finders, shallow water anchors, lights, downriggers, radios, GPS, chargers, and power panels, are the perfect way to connect your electronics correctly every time.Protect your expensive electronics, with fused connectors to safeguard expensive electronics, connect a 12V trolling motor to our 10 AWG lead for up to 15 AMP draw and three 14 AWG leads for up to a 10 AMP draw to allow multiple electronics to be quickly and easily connected and disconnected to a battery.Remove expensive batteries for storage, replacement, or theft protection in seconds.Once the products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly, by simply snapping the connectors together.Features: Multi 4 fused connection system to power your outdoor equipment easily and quickly Plug & Play Connections Suitable for use t-40° to 221° UL1977 120 Amp Rating Lithium Compatible One-year Warranty Salt Water Approved Made In the USA

Read more less

12V Multi-Fused Connection SystemWith more and more electronics being used in boating, this product allows up to four electronics or accessories to be connected to a single battery easily and correctly every time. Do it yourself.Depth finders, shallow water anchors, lights, downriggers, radios, GPS, chargers, and power panels, are the perfect way to connect your electronics correctly every time.Protect your expensive electronics, with fused connectors to safeguard expensive electronics, connect a 12V trolling motor to our 10 AWG lead for up to 15 AMP draw and three 14 AWG leads for up to a 10 AMP draw to allow multiple electronics to be quickly and easily connected and disconnected to a battery.Remove expensive batteries for storage, replacement, or theft protection in seconds.Once the products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly, by simply snapping the connectors together.Features: Multi 4 fused connection system to power your outdoor equipment easily and quickly Plug & Play Connections Suitable for use t-40° to 221° UL1977 120 Amp Rating. Lithium Compatible One-year Warranty Salt Water Approved Made In the USA 

Read more less

B924 Class B AIS Transceiver with WiFi, Bluetooth & VHF Antenna Splitter - 2W CSTDMA**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**Click here to download form.The most feature-rich 2W CSTDMA AIS transceiver in the B900 range. The B924 includes WiFi & Bluetooth for seamless wireless connectivity and AIS data streaming to any mobile device, PC, or wearable, with an integrated VHF antenna splitter to enable your transceiver to share your existing VHF antenna without any loss of performance. Like all B900 transceivers, it also includes an integrated next-generation GPS receiver and antenna and is designed for em-trak's unique FLEXI-FIT® bracket system to make installation as easy as possible.Exceptionally lightweight and completely weatherproof, the B924 delivers the very best (2W) AIS receive and transmit performance, so you see all AIS information and targets, even at maximum range. Your transceiver will also work with our CONNECT-AIS mobile phone app to make programming, configuration, and transceiver health monitoring simple and convenient.Features: Certified AIS Class B – 2W CSTDMA Integrated WiFi and Bluetooth Integrated VHF antenna splitter Global certification - USCG / FCC / Canada / Europe SRT-AIS™ Transceiver Engine for superlative proven performance FLEXI-FIT™ bracket system for easy, convenient, and secure installation Internal high-performance GPS receiver and antenna (external antenna optional) Water, pressure spray, and damp proof (IPx6, IPx7 certified) Protected from vibration, shock, and extreme temperatures Small and lightweight Ultra-low power consumption – best in class Guaranteed connectivity and interoperability with any app, chart plotter, smartphone, tablet, or PC NMEA 0183 & NMEA 2000 Automated health and performance monitoring Silent mode (transmit-off) function Enhanced RF screening to protect against electromagnetic interference Built-in power surge protection Physical & Environmental Specifications: Size (H x W x D): 150 x 115 x 45mm Weight: 425kg Operating temperature: -25°C to +55°C Storage temperature: -25°C to +70°C Ingress protection: IPx6 and IPx7 Electrical Specifications: Supply voltage: 12V or 24V DC Supply voltage range: 9.6V - 31.2V DC Average current (at 12V): 280mA Average current (at 12V) (wireless off): 245mA Peak current: 2A Average power consumption (at 12V): 3.4W Average power consumption (at 12V) (wireless off): 2.9W Galvanic isolation: NMEA 0183 inputs only, NMEA 2000, VHF antenna port Connectors: VHF antenna: SO-239 VHF radio: SO-239 GNSS: TNC Power: 12-way circular multipole NMEA 2000: 5-way Micro-C connector USB: USB Micro-B Data Interfaces: NMEA 0183: 2 x bi-directional ports NMEA 2000: NMEA 2000 Ed 3.101, LEN=1 USB: PC virtual com port for NMEA 0183 data WiFi: IEEE 802.11 (a/b/g), client and access point mode supported (2 connections in access point mode) Bluetooth: BT Classic 4.0, 7 concurrent connections Standards Compliance: AIS standards: IEC 62287-1 Ed. 3, ITU-R M.1371.5 Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008 Environmental standards: IEC 60945 Ed. 4 Serial data interface standards: IEC 61162-1 Ed 5.0, IEC 61162-2 Ed 1.0 NMEA 2000: NMEA 2000 Ed 3.101 GNSS performance standards: IEC 61108-1 Ed 2.0, IEC 61108-02 Ed 1.0 GNSS: Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo) Channels: 72 Internal/external antenna: Internal or optional external antenna Time to first fix from the cold start: 26s VHF Transceiver: VDL access scheme: CSTDMA Operating frequency: 156.025MHz - 162.025MHz Channel bandwidth: 25kHz Receivers/transmitters: 2 x receivers, 1 x transmitter AIS receiver sensitivity (20% PER): -111dBm AIS transmitter power: 2W (+33dBm) User Interface:Indicators: Power, transmit timeout, error, silent modeIn the Box: 1 x AIS transceiver 1 x Power and data cable (2M) 1 x VHF radio accessory cable 1 x FLEXI-FIT™ mounting bracket Complete with screws & optional fixing tape This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: AIS Class: B Antenna Included: Yes Display Included: No Function: Receive/Transmit GPS Included: Yes Box Dimensions: 6"H x 7"W x 7"L WT: 2.25 lbs UPC: 672975210533 Quick Guide (pdf)Brochure (pdf)

Read more less

Graph Power "Pro" - 14-18' Console BoatsThe latest in powering your Electronics designed for powering today's Locators Graph, and networking, 13ft of 8 gauge sheathed marine grade wire with 3 fused connections for your ConsoleFeatures: 8ft of 10 gauge sheathed marine grade wire for your front deck (bow) equipment 3 fused connections This kit provides protection and limits RF interference, to power your graphs, pucks, GPS, and NEMA boxes directly from your battery for the best performance and to meet Manufacturers' recommendations.  30 Amp fused at the battery and your choice of 3 or 5 Amp at the fused connections.  Connect-Ease is the best in Marine grade connections, heat shrinkable crimped connections are waterproof, vibration, and interference. Pro Fisherman and guides have experienced that to get the best performance from your electronics use this product to connect them directly to a lithium battery. Lithium Compatible

Read more less

Yak Max Pro Kayak Single Battery with Trolling Motor“Amp” up your fishing kayak with YAK MAX PRO, rigging designed to network multiple graphs, live imaging and forward-facing sonar transducers and black boxes, as well as a trolling motor all from an easy, self-contained pack-in/pack-out power rigging solution. Works with any Minnkota, Motorguide, Humminbird, Garmin, Lowrance, etc.Designed for serious kayak angers using multiple electronics, Graphs Forward and side imaging Fused Connections Protect your valuable electronics. Heat shrinkable splices allow for a lifetime of corrosion-free connections. Leave your wiring and rigging intact and remove your w-electronics and battery with ease. 18" of positive and negative 8 gauge trolling motor rigging with 3 connections and a quick snap battery connection allows you to spend more time on the water and less time preparing to fish.Features: Lithium Compatible Pro Tested

Read more less

Quick Connect with Accessory Port 6 GaugeConnect your outboard and extra accessories with this easy-to-use kit.Use the CE12VB4K, CE12VB4FK, CE12VB5K, or CE12VB5FK products to connect all of your marine, accessories, equipment, downriggers, and more to your main battery.Connect and disconnect with a simple click. Take your battery with you when leaving your boat unattended, or in storage, or use it with a CE12VB1S to keep a spare battery handy just in case.Features:Lithium Compatible

Read more less

Multi 5 Lead Accessory Connection SystemWith more and more electronics being used in boating, this product allows up to five electronics or accessories to be connected to a single battery easily and correctly every time.Connect any marine equipment including Depth Finders, GPS Units, Radios, Lights, Pumps, Aerators, and more to one of the 14 AWG leads (10 AMP draw) to allow multiple electronics to be quickly and easily connected and disconnected to a battery. Remove expensive batteries for charging, storage, replacement, or theft protection in seconds.Once the products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly, by simply snapping the connectors together.Features: Multi 5 connection system to power your outdoor equipment easily and Quickly. Plug & Play Connections Lithium Compatible. Suitable for use t-40° to 221° UL1977 120 Amp Rating. Lithium Compatible UL1426 Tinned Marine Grade Wire One-year Warranty – Salt Water Approved 5- 14 AWG 5” Leads 1 - 6 AWG Easy 12V Battery Connector 120 AMP Rating Made In the USA

Read more less

Graph Power TillerDesigned for powering today's Locators Graphs, and networking, 10ft of 10 gauge marine grade wire nylon sheathed for protection and to limit RF interference, 3 fused connections to power your graphs, pucks, GPS, and NEMA boxes directly from your battery for the best performance and to meet Manufacturers recommendations. Features: 30 Amp fused at the battery and your choice of 3 or 5 Amp at the fused connections. Connect-Ease uses the best marine grade connections, heat-shrinkable crimped connections are waterproof, vibration, and interference Lithium Compatible

Read more less

Yak Quick 3 Device Connection SystemThe CONNECT-EASE YAK QUIK represents our most simple, yet quick and easy way to send power to your kayak fishing devices/accessories.YAK Quik is a power solution for up to three powered kayak fishing accessories, all with a convenient and easy pack-in/pack-out battery connection.As kayak fishing has grown in popularity, so have the needs of today’s technologically savvy kayak angler. From tournament kayak anglers to guides to avid fishermen, women, and youth, many anglers are now rigging their watercraft with live imaging, forward-facing sonar, trolling motors, shallow-water anchors, lighting, GoPros/POV cameras, etc. Features: CONNECT-EASE YAK QUIK represents our most simple, yet quick and easy way to send power to your kayak fishing devices/accessories. Connect multiple graphs, live imaging, and forward-facing sonar transducers. With kayaks and Ice fishing becoming more sophisticated, quick, and easy, systems to connect to lithium and other mobile power supplies for graphs sonar, cell phones, GoPro, lights, and glow rings are essential. Plug & Play connections Lithium Compatible

Read more less

Multi 5 Fused Lead Accessory Connection SystemWith more and more electronics being used in boating, this product allows up to five electronics or accessories to be connected to a single battery easily and correctly every time.With fused connectors to safeguard expensive electronics, connect any marine equipment including Depth Finders, GPS Units, Radios, Lights, Pumps, Aerators, and more to one of the 14 AWG leads (10 AMP draw) to allow multiple electronics to be quickly and easily connected and disconnected to a battery. Remove expensive batteries for charging, storage, replacement, or theft protection in seconds.Once the products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly, by simply snapping the connectors together.Features: Multi 5 fused connection system to power your outdoor equipment easily and quickly Plug & Play Connections  Lithium Compatible Suitable for use t-40° to 221° UL1977  120 Amp Rating. UL1426 Tinned Marine Grade Wire One-year Warranty Salt Water Approved Made In the USA

Read more less

Spade-A-Nator Spade Style Battery Connection KitThe CONNECT-EASE SPADE-A-NATOR is the perfect solution for adding extra power for long days on the water—or for simple recharging at the end of the day without the hassle of removing your chosen battery from your fish-finder/graph shuttle or case.  YAK EASE SPADE-A-NATOR is a solution for up to three powered kayak or ice fishing accessories, all with a convenient and easy pack-in/pack-out battery connection for easy removal charging, and swapping of multiple batteries to power your fishing day.Features: CONNECT-EASE SPADE-A-NATOR is the perfect solution for adding extra power for long days on the water—or for simple recharging at the end of the day without the hassle of removing your chosen battery from your fish-finder/graph shuttle or case. Tournament kayak and ice anglers, guide avid fishermen, women, and youth, many anglers are now rigging their watercraft with live imaging, forward-facing sonar, trolling motors, shallow-water anchors, lighting, GoPros/POV cameras, etc. Connect multiple graphs, live imaging, and/or forward-facing sonar transducers. With kayaks and Ice fishing becoming more sophisticated there comes a need for quick, easy, systems to connect to lithium and other mobile power supplies for graphs sonar, cell phones, GoPro, lights, and glow rings are essential. Plug & Play Connections are Lithium Compatible Lithium Compatible

Read more less

Yak-Ease Graph PowerYAK EASE GRAPH POWER is a permanent power solution for up to three powered kayak fishing accessories, all with a convenient and easy pack-in/pack-out battery connection.From the get-go, GRAPH POWER was designed to solve the connections and power issues associated with running today’s sophisticated fishing electronics common on modern Kayaks, providing clear, clean power and direct connections. Now that extends into the realms of kayak angling and ice fishing with numerous new, problem-solving rigging and power distribution products.GRAPH POWER is designed to work with all manufacturers of fresh- and saltwater marine electronics. GRAPH POWER features marine-grade sheathed wire with multiple fused connections for your electronics. Works with Humminbird, Lowrance, Garmin, Forward side, and down imaging systems. Power multiple electronics, GO Pro, phones, and others with pouring fused connections.Features: CONNECT-EASE SPADE-A-NATOR is the perfect solution for adding extra power for long days on the water - or for simple recharging at the end of the day without the hassle of removing your chosen battery from your fish-finder/graph shuttle or case. From tournament kayak anglers to guides to avid fishermen, women, and youth, many anglers are now rigging their watercraft with live imaging, forward-facing sonar, trolling motors, shallow-water anchors, lighting, GoPros/POV cameras, etc. With kayaks and Ice fishing becoming more sophisticated there comes a need for quick, easy, systems to connect to lithium and other mobile power supplies for graphs sonar, cell phones, GoPro, lights, and glow rings are essential. Plug & Play connections are Lithium Compatible Lithium Compatible

Read more less

Mercury Mariner 9.9, 15 (1990-2004) & Yamaha 9.9, 15 (1990-2006)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

GM H5 Gimbal Mount for HELIX 5HELIX 5 Series gimbal mounting bracketWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 7"W x 9"L WT: 0.4 lbs UPC: 082324045936

Read more less

NMEA 2000 T-Connector - 1-Way Extension BlockAs the NMEA 2000 network expands beyond the 3-device limit of Digital Yacht’s NMEA 2000 Starter Kit, users can use one of these single T-pieces to add devices. With male > female > female connectors, multiple T-pieces can be plugged together or added to the 4-way T-piece included in the starter kit. The lower “drop cable” connector is female so that there are no exposed pins when the drop cable is removed.*Digital Yacht can supply NMEA 2000 cables and connectors to expand the NMEA 2000 to whatever size is needed (up to the maximum 50 NMEA 2000 device limit).Features: NMEA 2000 Single T-Piece Standard “Micro C” connectors make it very easy for future network expansion Metal connectors improve reliability Waterproof rating of IP68 Quick Guide (pdf)

Read more less

WND100 Mast Head Unit & 20M CableWind Transducers have a tough life, experiencing extreme weather, constant movement and the occassional seagull, so it is no surprise that they can often fail. With this in mind, the WND100 wind sensor features an ultra tough design with UV and salt resistant plastics, Igildur™ bearings for exceptional life and corrosion resistance. Data transmission is via a super-thin 20m digital cable providing fast update NMEA0183 data for maximum compatibility with legacy instrument systems and multi-function displays.Features: Ultra tough Mast Head Unit Igildur™ bearings for exceptional life and corrosion resistance UV, Salt water and high impact resistant plastics 12/24v DC operation with minimal power consumption Super thin 20m Mast Head cable Industry standard NMEA0183 Output for maximum compatibility Output at 5Hz (configurable)

Read more less

Lowrance Ghost Mega 360 Dual BracketWith this bracket, users can attach a FORESIGHT Mount and a Humminbird Mega 360 unit to a Lowrance Ghost trolling motor with a single bracket. Both ends of the bracket have a pivot joint for ultimate versatility in how the units sit in relation to the trolling motor.Specifications: Weight: 4 lbs. Dimensions: 14 x 10 x 6 inches

Read more less

Maretron NM-NM Mini Gender Changer, Male to MaleMaretron cables have a male connector on one end and a female connector on the other end. Normally, the male connector points back towards the network power supply, but on some occasions, this gets reversed and a gender changer can be used to get back to the desired connector type.Waterproof seals for reliable connections Easily swap connector gender to get back to desired connector type Specifications: Connection Gender: Male-Male Box Dimensions: 1"H x 2"W x 5"L WT: 0.21 lbs UPC: 873804002392

Read more less

SCU-31 GPS Smart AntennaFeatures: 66 Channel WAAS GPS receiver 49' (15M) routing cable UV protected Ivory white color NMEA0183 Data input/output Rapid GPS acquisition time 3 year waterproof warranty Specifications: Type: Antennas Box Dimensions: 3"H x 6"W x 8"L WT: 1.8 lbs UPC: 788026149049

Read more less

SI-TEX 492/50/200 In-Hull Transducer f/ES502 Dual Frequency 50/200 kHz Max Power: 500W Beam Angle: 42 deg. @ 50 kHz, 12 deg. @ 200 kHz Housing: Plastic Mount: In-Hull Plug: 8 pin Cable: 30' Temp: No Speed: No For SI-TEX model: ES502 Specifications: Temperature: No Cable Length (Feet): 30' Mounting Style: In-Hull Imaging: Standard Chirp: No Speed Included: No Pins: 8 Box Dimensions: 4"H x 7"W x 8"L WT: 2 lbs UPC: 010407310732

Read more less

3-Pin, 12/24V Power Cable - 1.5M f/DSM30/300, CP300, 370, 450, 470 & 570Features: Length: 1.5M 12/24V 3-Pin Compatible Devices: DSM30 DSM300 CP300 CP370 CP450 CP470 CP570 CP200 E120 Specifications: Type: Power Cords Box Dimensions: 1"H x 10"W x 10"L WT: 0.35 lbs UPC: 723193798096

Read more less

Pole Mount for RS150 GPS AntennaRaymarine's Pole Mount specifically for the RS150 GPS Antenna. The RS150 has 72 channels and offers faster 10Hz performance and enhanced accuracy. The RS150 is also a GNSS receiver and supports the GLONASS global navigation satellite system. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 5"W x 5"L WT: 0.4 lbs UPC: 723193814826

Read more less

15M Digital cable with Raynet connector f/HD & Super HD Color Radar Scanners Specifications: Type: Cables Box Dimensions: 1"H x 21"W x 21"L WT: 8 lbs UPC: 723193770603

Read more less

Hawk Wind Indicator for Boats up to 8M - 10"The Hawk is the original Hawk Wind Indicator and sets the standard by which all Wind Indicators are judged. Lightweight with a balanced vane arm and the Hawk "V" jewel bearing surface this is the ultimate in Wind Indicator technology. The Vane arm is made from tough Nylon giving good rigidity and UV Protection. The support rod is high grade aluminum allowing it to be bent if required or straightened should it be knocked or damaged. The easily removable mast clip can be mounted either vertically or horizontally and is easily removed without tools. Adjust and lock the reference arms at any angle for quick, at a glance indication or either gybing or tacking angles.Specifications: Vane Arm Length 27cm (10.6") Overall Height 28cm (11") Overall Weight 25 grams Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 2"H x 4"W x 13"L WT: 0.1 lbs UPC: 652773100205

Read more less