Reed Switch Fuel Sender - 600 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 23.6" (600mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 27"L WT: 1 lbs UPC: 754059064468

Read more less

52MM (2-1/16") ViewLine Transmission Oil Pressure 30 Bar/435 PSI - Black Dial & Round BezelVeratron ViewLine offers a comprehensive modular, modern series of instruments for engine monitoring.More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, we offer an innovative comprehensive standard instrumentation platform which is also available for outboard engine use.  ViewLine provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.The ViewLine 52 mm Gauges are available in black or white dial versions, which are always completed with a round bezel in identical color. Interchangeable bezel option.Features: 8 pole Tyco/Hirschmann MQS plug  Red LED Via Plus And Min Warning Light Operating voltage 8–32 V  Input signal: standard Ω values  Optional make-point switch can be connected  Reverse polarity protection  Anti-fog double lens  Front side protection rating IP67  52 mm installation diameter  50 mm installation depth  In the Box: Gauge Connection Cable Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Series: ViewLine Gauge Type: Oil Pressure Gauge Size: 2-1/16" Box Set: No Box Dimensions: 3"H x 3"W x 4"L WT: 0.35 lbs UPC: 7640178723009 Owner's Manual (pdf)

Read more less

RVM-100 Transom Mount Transducer RVM-100 all-in-one transom mount transducer is designed for Raymarine RealVision MAX compatible sonar modules, and RealVision MAX equipped chartplotters.  The RVM-100 lets you easily identify structures and locate fish with the life-like clarity of RealVision MAX technology. The RVM-100 is a 4-channel, Wide Spectrum CHIRP transducer with DownVision™, SideVision™, high-frequency CHIRP fish targeting, and 3D sonar inside. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes 3D sonar imagery, automatically compensating for vessel motion. You’ll enjoy an accurate and life-like model of the underwater environment that filters out distortions caused by waves, swells, or vessel maneuvering.  The RVM-100 also has a built-in fast-response water temperature sensor for quick, accurate readings.The RVM-100 is designed for easy transom mounting on outboard-powered motor boats. It features a rugged, marine-grade stainless steel mounting bracket with an integrated kick-up to prevent damage in the event of a strike with floating debris, rocks, or stumps.For bass boats, flats boats, and skiffs, an optional stainless Jack-Plate mounting bracket (A80480) and spacer kit (A80482) are available. *Works with Axiom 2 Pro RVM series, and RVM1600 Sounder ModuleFeatures: 600-Watt traditional CHIRP Designed for transom mounting on outboard boats Stainless Steel mounting bracket with an integrated kick-up feature 8M Cable

Read more less

NMEA 2000 Cable & T Connector Connection Kit for Siren 3 ProOptimize the connectivity of your Connected Boat® system, allowing you to monitor engine data, water, fuel and waste tanks, and more! The NMEA 2000 Connection Kit includes a 2-meter connection cable and a 3-Way Connection "T" – everything you'll need to hook up to the NMEA 2000 data system 'backbone'. *Compatible with the Siren 3 Pro Only

Read more less

Transducer Extension Cable for CP470/CP570 Wide CHIRP Transducers - 10MFeatures: Speed, Depth and Temperature 10M Specifically for Raymarine's CP470 and CP570 Wide CHIRP Transducers Specifications: Type: Extension Box Dimensions: 3"H x 8"W x 8"L WT: 2.05 lbs UPC: 723193796344

Read more less

Euro Black 4" Tachometer with Hourmeter - 6,000 RPM (Gas - Inboard)Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.4" - Hole size: 3.375" (85mm)Specifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life Perimeter-lighted Black dial Can be adapted for 24 VDC systems Technical Specifications: 7 character LCD display 0-999999.9 Hours Updates in .1 increments Factory P/N TC9122*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer w/Hourmeter Series: Euro Black Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Set: No Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 759266328327 Quick Guide (pdf)

Read more less

15" Great HawkFor boats from 8m to 20mThe Great Hawk is designed for Cruising and Racing yachts up to 20m. The Great Hawk vane arm is made from the same super tough nylon and the Reference Arms are made from glassed filled nylon for ultimate rigidity and UV protection. The precision balanced vane arm and Hawks "V" Jewel bearing surface gives instant response to shifts and gusts with minimal inertia. The Reference Arms may be preset at 55, 60 or 65 degrees or any angle you prefer and can be used for either upwind or downwind angles. The 5mm Aluminum support rod is strong enough to take normal wear and tear, but can be bent straight should it be knocked while the mast is being stepped or unstopped. The Great Hawk is easily removed from its mounting bracket with one screw and the mast bracket can be mounted vertically or horizontally. Specifications: Vane Arm length 38cm (15")  Overall height 29cm (11.4")  Overall weight 70 grams. Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 3"H x 5"W x 16"L WT: 0.5 lbs UPC: 652773100106

Read more less

SingleViu 80mm (3-1/8") Tachometer - 4,000 RPMSingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes. These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.Features: 0-400 kHz Default Input  RGB LED Illumination (default illumination set to White)  Water Resistant Front & Rear  Includes Wire Harness Voltage 12-24V Molex MX 150 8 and 12 Pin Connector Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 12-24V Series: SingleViu Gauge Type: Tachometer Gauge Size: 80mm Box Set: No Box Dimensions: 5"H x 8"W x 8"L WT: 0.95 lbs UPC: 4103590683441 Owner's Manual (pdf)

Read more less

AIS100 AIS USB Receiver with QMax Portable AntennaThis pack is perfect for PC-based navigation systems, with USB drivers for PC, MAC, and Linux. It also includes a portable VHF antenna.This bundle includes an AIS receiver with a VHF antenna. This value-priced, entry-level AIS receiver is Digital Yacht’s most cost-effective solution for getting AIS on your PC. The AIS100 uses true dual-channel technology – it will outperform all other, inferior, single-channel receivers. This version is self-powered from the PC or MAC so no additional DC power is required. It ships with a 25cm portable VHF antenna with a sucker cup style mounting – ideal for portable useSimple plug-and-play USB connection to a PC. It uses standard drivers built-in to Windows XP/Vista/7/8/10 and is automatically mapped to an available “virtual” com port, which your PC software can read. Also compatible with Mac OS X and all LINUX Kernels since V2.4.20.This is for use with any AIS-compatible PC navigation software, such as the latest SmarterTrack, MaxSea, SeaPro, Nobeltec, and RosePoint applications.The QMax is a compact 25cm VHF antenna with sucker cup-style mounting. This base-loaded 1/4 wave antenna, comes complete with an integral 4m (12ft) cable, fitted with a BNC connector and also a rubber suction cup for fast, easy mounting to any smooth horizontal surface.Features: AIS receiver with VHF antenna Low-cost entry-level AIS receiver High-performance dual-channel AIS receiver for use with AIS-compatible PC navigation software USB Interface for simple Plug and Play connection to a PC Supplied with QMAX compact 25cm VHF antenna with sucker cup mount Easy to install IP54 black box solution

Read more less

CLA2000 Deep Sea Class A AIS TransponderDigital Yacht’s CLA2000 is the ultimate SOLAS and inland waterway globally approved Class A AIS transponder. Water and weather proof to IP67, it has a full integrated 5” hi-res colour display supporting a wide range of functionality including electronic chart navigation with optional C-Map MAX charting and AIS target management.Proven, superior real world AIS message receive and transmit and message processing performance is delivered by advanced core SDR AIS technology. This state of the art technology ensures you see more targets, more of the time and at maximum range.The CLA2000 will find applications on SOLAS mandated vessels over 300GRT as well as workboats, rescue services, inland waterways users, RIBs, large yachts and any user wanting premium AIS performance and safety.The CLA2000 has optimised software for detecting AIS SART and MOB devices with a dedicated icon for this class of AIS. An automatic alarm is activated on detection of an AIS SART beacon activation. The target plot display will also calculate relative bearing of the device for easy visualisation of the target and rescue.The CLA2000 is fitted with a micro SD card reader located behind a waterproof cover on the front panel. This can support software updates, data logging of AIS and position data to a blank card as well as compatibility with C- Map MAX charting cards for optional detailed back ground charting.The CLA2000 has an integrated wireless interface for sending AIS and position data to smart phones, tablets, PCs and MACs for use with 3rd party charting and navigation apps. It supports client mode where it can connect to an existing wireless network or AP mode where devices can connect directly to the CLA2000. Up to 5 simultaneous/connected devices are possible.Features: Globally approved Class A AIS transponder High resolution, 800 x 480 pixel 5” colour display (MKD) with easy to use, fast user interface Bracket or flush mount – waterproof to IPX7 Integrated GPS with external antenna or utilise external NMEA feed (user selectable) 3 x NMEA 0183 interface (bi-directional for plotter, ECDIS, radar etc) 3 x sensor input ports (eg BlueBoard, external GNSS, gyro etc) NMEA 2000 interface Built in SD card slot for software updates, AIS data port logging or C-Map MAX mapping capability with optional C-Map data card Built in wi-fi for connection to iPads and tablets for wireless navigation Sophisticated AIS SART MOB alarm and display capability User programmable alarms for CPA and TCPA Advanced filtering of targets External alarm and remote silence switch capability Specifications: GPS Included: Yes Function: Receive/Transmit Display Included: Yes AIS Class: A Box Dimensions: 5"H x 10"W x 16"L WT: 6.25 lbs Quick Guide (pdf)

Read more less

NMEA 2000 terminator - femaleWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Female Data Interface: NMEA 2000 Box Dimensions: 1"H x 1"W x 1"L WT: 0.02 lbs UPC: 753759078171

Read more less

AIS700 Class B AIS Transceiver with Antenna Splitter**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**Click here to download form.The AIS700 from Raymarine is a Class B Automatic Identification System (AIS) transceiver designed for use with Raymarine multifunction navigation display systems.  AIS is an international marine navigation safety system that allows participating vessels to silently exchange key navigation information including vessel name, identification, course, speed and more.  AIS contacts can be displayed on Raymarine multifunction displays, chartplotters, radar displays and select instruments.  As a Class B AIS transceiver, the AIS700 not only receives broadcasts from other vessels, it also transmits your own boat’s information too helping you to be seen on other vessels’ systems.The AIS700 is engineered using the very latest SO-TDMA (Self Organized Time Division Multiple Access) networking technology which allows it to perform faster and at longer ranges than d speed over previous generation AIS products.  For ease-of-installation, the AIS700 has a built in VHF-band antenna splitter which allows it to share a single antenna with your current VHF radio.  AIS700 also has its own internal, dedicated 72-channel GPS receiver with external antenna as required by international standards.  AIS700 also supports both hardware and software-enabled Silent Mode.  This allows you to temporarily restrict broadcasting your vessels own data, while continuing to receive updates from surrounding traffic.  Silent Mode can be particularly useful when transiting waters where extra security is a concern, or even in competitive tournament scenarios when you might want to prevent other from finding out the location of the hot bite.  Normal AIS safety broadcasts can be easily reinstated with a few simple touches of the AIS controls in your Raymarine MFD, or with the flip of a switch for hardware-silenced systems.The AIS700 is super-compact for easy mounting inside your helm, in a service locker, or other out-of-the-way location.  It can connect to your other onboard electronics using the latest NMEA2000 networking.  AIS700 also has a built-in NMEA0183 multiplexer to assist in connecting it to older MFD’s and VHF radio systems.  AIS700 also has a built-in USB 2.0 connection that can be used to tie the transceiver into a computer or laptop running AIS compatible navigation software.  AIS700 has a Secure Digital (SD) memory slot that can be fitted with an owner-suppled flash memory card for continuous recording of the AIS data stream.  Features: Full transmit and receive AIS for enhanced situational awareness and safety Latest SO-TDMA networking for longer range and faster performance Built-in antenna splitter simplifies installation with existing VHF radio antenna NMEA2000, NMEA0183, PC and SeaTalkng Compatible Software or hardware switchable Silent Mode for enhanced security when needed In the Box AIS700 Class B AIS Transceiver with built-in VHF antenna splitter GNSS (GPS) Antenna, gasket and pole mount kit Power and data cable (2 meters) VHF Radio antenna interconnect cable (1 meter) DeviceNet to SeaTalk NG Cable (1 meter) Mounting Hardware Pro-AIS Programming Software CD-ROM Documentation kit This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: GPS Included: Yes Function: Receive/Transmit Display Included: No Antenna Included: No AIS Class: B Box Dimensions: 5"H x 9"W x 14"L WT: 3.85 lbs UPC: 723193822616

Read more less

Gateway Touchscreen DisplayNo more compatibility issues or complex setups. Xantrex Gateway gives you power at your fingertips to integrate, monitor, and control all your essential components — batteries, inverter/charger, and solar controller into one seamless system for effortless operation.Xantrex offers a complete energy system that includes easy-to-use connectivity. The Xantrex gateway provides a coordinated view and easy drill-down access to control and monitor your system as a whole rather than single separate components. Remote monitoring with WiFi and Bluetooth capabilities makes your life easier than ever before.Features: Replace multiple displays with one Error alerts to monitor performance Coordinated system control What's Included?Xantrex Gateway Touchscreen PanelHDMI and USB 39" (1.0M Cables)Specifications: Housing/Mounting System: ABS Plastic, Wall Mount 4 screws IP Rating: Indoor IP42 front; IP21 back Display Resolution: 1024 x 600 Weight: 0.8lb (360g) Dimensions: 7.2 x 5.5 x 0.975in (183 x 140 x 25mm)

Read more less

Evolution EV-150 Hydraulic Autopilot System PackThe Evolution EV-150 Hydraulic Autopilot System Pack is a complete autopilot-in-a-box kit that is ready to install on many popular fishing and cruising powerboats with hydraulic steering. The system comes complete with our p70Rs autopilot controller, EV1 Sensor Core, ACU150 Actuator Control Unit, Type 1 Hydraulic Pump, and an Evolution autopilot cabling kit.Engineered for simplicity, Raymarine's award-winning Evolution autopilots eliminate the need for complicated set up and calibration. Thanks to the intelligent 9-axis EV sensor core, the autopilot automatically evolves and adapts to your vessel's steering characteristics without any user adjustments. The result is precise and confident course keeping, regardless of vessel speed or sea conditions.The Evolution EV-150 system also employs Raymarine's patented Hydro-Balance™ technology which delivers superior autopilot performance for hydraulically steered boats, particularly those with outboard motors and rudder-reference less systems. Hydro-Balance automatically compensates for hydraulic system elasticity, steering system asymmetry, and torque steer to keep your boat on-course at trolling speed, cruising speed, and all-out running. Anglers will also love the Evolution Autopilot's built-in trolling patterns. Let the autopilot work the boat while you prep bait, set your lines and adjust your spread. The system is also equipped with Raymarine latest Evolution TrackIQ™ algorithms which deliver tighter track-keeping and faster track acquisition. It also uses information on vessel pitch, roll, yaw and heave to stabilize GPS navigation data like course over ground, speed over ground and cross track error for the best possible tracking to waypoints and routes. The Raymarine EV-150 Hydraulic Autopilot System Pack is the ideal autopilot for small to medium sized hydraulically steered vessels with a steering ram capacity between 4.9 cu. in. (80cc) and 14.0 cu in. (230cc). The system is for 12-volt DC electrical systems only.Includes E70329 p70Rs Control Head E70096 EV-1 Sensor Core R70160 Evolution Cable Kit E70430 ACU-150 Actuator Control Unit M81120 Type 1 12v Hydraulic Pump Specifications: Steering Type: Hydraulic Box Dimensions: 8"H x 17"W x 20"L WT: 15.45 lbs UPC: 723193853719

Read more less

NMEA 2000 Backbone Cable - 10MAncor's NMEA 2000 Approved Backbone Cables offer connection to an NMEA 2000 tee connector. The yellow couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The backbone cables are available in four lengths from 0.5 meter (1.6 feet) to 10 meters (32.8 feet) to cover a wide variety of applications.Features: Color coded for easy installation and component identification Large 18 AWG power conductors to reduce voltage drop and provide better reliability for critical backbone cables NMEA 2000 Approved, 100 percent universal and compatible with other manufacturers' products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 10m Box Dimensions: 3"H x 9"W x 10"L WT: 2.8 lbs UPC: 091887982251 Brochure (pdf)

Read more less

Gateway Communication DeviceXantrex Gateway allows you to conveniently monitor and control all your favorite Xantrex products via wireless Wi-Fi connection using your smartphone, tablet, PC, or the Xantrex Gateway Touchscreen Panel 808-0890. Whether it is configuring the transfer relay on your inverter, troubleshooting your inverter/charger, checking your battery status, or turning your inverter off to save power, Gateway helps you do it all. Monitoring and configuring settings on your Xantrex devices has never been this easy.Features: Save dashboard real estate in your RV or boat by monitoring and controlling all your Xantrex products on one device Connect to your Xantrex devices via smartphone/tablet/PC wirelessly with Xantrex Gateway Monitor the status of your devices, including current, voltage, and battery state of charge Configure settings such as the transfer relay, or enable/disable your inverter to save power

Read more less

NMEA 2000 6M Drop CableThis Digital Yacht cable is a 6m (20ft) NMEA 2000 drop cable made of metal connectors for maximum reliability. The drop cable allows users to expand the NMEA 2000 to whatever size is needed.*Digital Yacht “Drop Cables” can also be used as backbone cables and are easily connected to make any length of backbone cable required. Also, the total length of all drop cables must be less than 76m.Features: 6m (20ft) NMEA 2000 Drop Cable Standard “Micro C” connectors make it very easy for future network expansion Metal connectors improve reliability Waterproof rating IP68 Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 6m Box Dimensions: 2"H x 7"W x 10"L WT: 0.75 lbs UPC: 703791696352 Quick Guide (pdf)

Read more less

B951 Class B AIS Transceiver - 5W SOTDMA**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**Click here to download form.The B951 is a high-power (5W SOTDMA) Class B transceiver, delivering advanced performance and ultimate reliability through em-trak's next-gen technology. Small and durable, this trusted transceiver processes all AIS transmissions in real-time, with increased range and transmission priority so you always have the complete picture and the time to respond, even in the busiest waters.em-trak's flexible, intelligent connectivity means the B951 can be paired to any chart-plotter and its next-gen GPS receiver and the antenna are already integrated inside the device to provide best-in-class, ultra-low power consumption, and performance. em-trak's unique FLEXI-FIT® bracket system completes the package and ensures easy installation.Features: Certified AIS Class B – 5W SOTDMA Global certification - USCG / FCC / Canada / Europe SRT-AIS™ Transceiver Engine for superlative proven performance FLEXI-FIT™ bracket system for easy, convenient, and secure installation Internal high-performance GPS receiver and antenna (external antenna optional) Water, pressure spray, and damp proof (IPx6, IPx7 certified) Protected from vibration, shock, and extreme temperatures Small and lightweight Ultra-low power consumption – best in class NMEA 0183 & NMEA 2000 Automated health and performance monitoring Silent mode (transmit-off) function Enhanced RF screening to protect against electromagnetic interference Built-in power surge protection Physical & Environmental Specifications: Size (H x W x D): 150 x 115 x 45mm Weight: 375kg Operating temperature: -25°C to +55°C Storage temperature: -25°C to +70°C Ingress protection: IPx6 and IPx7 Electrical Specifications: Supply voltage: 12V or 24V DC Supply voltage range: 9.6V - 31.2V DC Average current (at 12V): 135mA Peak current: 2.5A Average power consumption (at 12V): 1.6W Galvanic isolation: NMEA 0183 inputs only, NMEA 2000, VHF antenna port Connectors: VHF antenna: SO-239 GNSS: TNC Power: 12-way circular multipole NMEA 2000: 5-way Micro-C connector USB: USB Micro-B Data Interfaces: NMEA 0183: 2 x bi-directional ports NMEA 2000: NMEA 2000 Ed 3.101, LEN=1 USB: PC virtual com port for NMEA 0183 data Standards Compliance: AIS standards: IEC 62287-1 Ed. 3, ITU-R M.1371.5 Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008 Environmental standards: IEC 60945 Ed. 4 Serial data interface standards: IEC 61162-1 Ed 5.0, IEC 61162-2 Ed 1.0 NMEA 2000: NMEA 2000 Ed 3.101 GNSS performance standards: IEC 61108-1 Ed 2.0, IEC 61108-02 Ed 1.0 GNSS: Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo) Channels: 72 Internal/external antenna: Internal or optional external antenna Time to first fix from the cold start: 26s VHF Transceiver: VDL access scheme: SOTDMA Operating frequency: 156.025MHz - 162.025MHz Channel bandwidth: 25kHz Receivers/transmitters: 2 x receivers, 1 x transmitter AIS receiver sensitivity (20% PER): -111dBm AIS transmitter power: 5W (+37dBm) User Interface:Indicators: Power, transmit timeout, error, silent modeIn the Box: 1 x AIS transceiver 1 x Power and data cable (2M) 1 x FLEXI-FIT™ mounting bracket Complete with screws & optional fixing tape This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: AIS Class: B Antenna Included: Yes Display Included: No Function: Receive/Transmit GPS Included: Yes Box Dimensions: 6"H x 7"W x 7"L WT: 2 lbs UPC: 672975210540 Quick Guide (pdf)Brochure (pdf)

Read more less

B923 Class B AIS Transceiver with VHF Splitter - 2W CSTDMA**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**Click here to download form.Get the most from your on-the-water experience with the B923, a 2W CSTDMA AIS Class B transceiver. Small and lightweight, it delivers em-trak's advanced AIS performance to ensure you see all information and targets, even at maximum range, and with the lowest power consumption in its class.The B923 is equipped with an integrated VHF antenna splitter, which enables your transceiver to share your existing VHF antenna without any loss of performance. It offers quick and simple installation, with built-in intelligent connectivity, including an integrated next-generation GPS receiver and antenna and em-trak's unique FLEXI-FIT® bracket system to get you up and running in no time at all. The dual NMEA2000 & 0183, coupled with serial ports, USB, optional Wi-Fi, and Bluetooth also make connecting to all your tablets, PCs, display, and navigation devices easy and simple.Features: Certified AIS Class B – 2W CSTDMA Integrated VHF antenna splitter Global certification - USCG / FCC / Canada / Europe SRT-AIS™ Transceiver Engine for superlative proven performance FLEXI-FIT™ bracket system for easy, convenient, and secure installation Internal high-performance GPS receiver and antenna (external antenna optional) Water, pressure spray, and damp proof (IPx6, IPx7 certified) Protected from vibration, shock, and extreme temperatures Small and lightweight Ultra-low power consumption – best in class Guaranteed connectivity and interoperability with any chart plotter or PC NMEA 0183 & NMEA 2000 Automated health and performance monitoring Silent mode (transmit-off) function Enhanced RF screening to protect against electromagnetic interference Built-in power surge protection Fail-safe VHF radio operation Physical & Environmental Specifications: Size (H x W x D): 150 x 115 x 45mm Weight: 415kg Operating temperature: -25°C to +55°C Storage temperature: -25°C to +70°C Ingress protection: IPx6 and IPx7 Electrical Specifications: Supply voltage: 12V or 24V DC Supply voltage range: 9.6V - 31.2V DC Average current (at 12V): 245mA Peak current: 2A Average power consumption (at 12V): 2.9 W Galvanic isolation: NMEA 0183 inputs only, NMEA 2000, VHF antenna port Connectors: VHF antenna: SO-239 VHF radio: SO-239 GNSS: TNC Power: 12-way circular multipole NMEA 2000: 5-way Micro-C connector USB: USB Micro-B Data Interfaces: NMEA 0183: 2 x bi-directional ports NMEA 2000: NMEA 2000 Ed 3.101, LEN=1 USB: PC virtual com port for NMEA 0183 data Standards Compliance: AIS standards: IEC 62287-1 Ed. 3, ITU-R M.1371.5 Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008 Environmental standards: IEC 60945 Ed. 4 Serial data interface standards: IEC 61162-1 Ed 5.0, IEC 61162-2 Ed 1.0 NMEA 2000: NMEA 2000 Ed 3.101 GNSS performance standards: IEC 61108-1 Ed 2.0, IEC 61108-02 Ed 1.0 GNSS: Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo) Channels: 72 Internal/external antenna: Internal or optional external antenna Time to first fix from the cold start: 26s VHF Transceiver: VDL access scheme: CSTDMA Operating frequency: 156.025MHz - 162.025MHz Channel bandwidth: 25kHz Receivers/transmitters: 2 x receivers, 1 x transmitter AIS receiver sensitivity (20% PER): -111dBm AIS transmitter power: 2W (+33dBm) User Interface:Indicators: Power, transmit timeout, error, silent modeIn the Box: 1 x AIS transceiver 1 x Power and data cable (2M) 1 x FLEXI-FIT™ mounting bracket Complete with screws & optional fixing tape This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: AIS Class: B Antenna Included: Yes Display Included: No Function: Receive/Transmit GPS Included: Yes Box Dimensions: 6"H x 7"W x 8"L WT: 2.25 lbs UPC: 672975210526 Quick Guide (pdf)Brochure (pdf)

Read more less

HDR 650 In-Dash Digital Depthsounder The HDR 650 In-Dash Digital Depth Sounder gives you instant, reliable digital depth readings, and offers customizable bezel and face colors to complement italled gauges. This unit comes packed with a transom mount transducer. Bezel colors included: White, Black and Chrome. Face plate colors included: White and Black.Highlights Easy to Install into Existing 2 1/8 inch gauge opening Completely waterproof Easy to read large, backlit LCD display for use at night Wires to Ignition Switch for Auto Power On Shallow and Deep Depth Alarms Reads in Feet Tracks Bottom Up to 70 MP Specs 1.25" LCD Display 200kHz operating frequency 600 ft depth Deep/Shallow water alarms WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Transducer Type: Transom Mount Shape: Round Screen Size: 1-1/4" Instrument Function: Depth Box Dimensions: 4"H x 7"W x 9"L WT: 1.6 lbs UPC: 082324034992 Owner's Manual (pdf)

Read more less

PC 11 Power CableFiltered power cable, 6 ft, waterproof. Used with all HELIX 9 Series, HELIX 10 Series, HELIX 12 Series, 800 Series, 900 Series, 1100 Series products, 797, 798. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 2"H x 8"W x 9"L WT: 0.3 lbs UPC: 082324508080

Read more less

FishPod® 10BX Boat Mount Bluetooth FishfinderTurn your Smartphone into a Boat Mount Fish Finder! This iOS and Android app-based SONAR device is a valuable addition to any tackle box. With over 20 years of marine electronics experience packed into this wireless Depth Sounder Module, you'll always know what lies beneath.Features: Bluetooth 5 wireless technology IOS and Android compatible One-Touch mode access VirtuView Mode FishScape™ FishScape™ HD Data mode FishTrax™ intelligent sonar Auto and manual depth range Bottom Lock Limitless display color picker Underwater VirtuView™ Waterproof DSM Algorithmic software Audible alarms Plug-N-Plau connectors Adaptable to any fishing style Shoot-Thru technology EasyTouch™ programming Status indicator Navigational data Water temperature display Displayed and supported in the USA Hassle-free repair or replacement for any damage, for any reason Specifications: Operating Temperature: 0160°F (-1871 °c) Depth Range: 1.5 ft (.5 m) 199 ft (60 m) Transducer Frequency: Dual 200 kHz Transducer Beam Angle: Dual 45-degree Bluetooth Version 5.0 What's Included? Quick Start Guide FishPod® Portable IOS and Android Software (free to download from the app stores) Choice of Transom of Thru-Hull Transducer Specifications: Transducer Included: Yes Transducer Type: Transom Mount Box Dimensions: 4"H x 7"W x 7"L WT: 2.4 lbs UPC: 818800003271 Brochure (pdf)

Read more less

FishPod® 5X Bluetooth FishfinderTake the guesswork out of fishing with our portable sonar fish finder.Turn your Smartphone into a Fish Finder! This iOS and Android app-based SONAR device is a valuable addition to any tackle box. With over 20 years of marine electronics experience packed into a castable, pocket-sized bobber, you'll always know what lies beneath. Real Sonar, Reel SimpleTurn your smartphone into an easy-to-use fish-finding device in seconds. The FishPod only takes one touch to set up to match your skill level. Anytime, AnywhereCast from the shore, attach it to your paddlesports equipment, fling it from your boat, or slip it into your pocket and take it on the ice. From the pond to the ocean, the FishPod is ready wherever you are.Fish At Your FingertipsOur software comes pre-programmed with 4 modes of operation, each one custom-tuned to meet the needs of each fisherman’s skill level. The FishPod app is available.Features: 4-Preset Operating Modes - Engineered to help you evolve your fishing by auto-adjusting screen settings to target fish by size, depth, or schooling. FishEcho™ - Tunes sonar in the water column to pinpoint the size and depth of fish while tuning out clutter, debris, and false echoes. TraxNut™ Mounting System - Allows attachment to any 1/4 x 20 mounting bracket and expandability to any fishing platform. BottomScan™ - Adjusts bottom contour and composition readings to decipher between vegetation and soft / hard seabed. Vertical Flasher - Amplifies the most recently received sonar echoes making them easier to track. Great for ice fishing!

Read more less

173 2-1/4" Ball Mount for Fishfinder & ChartplotterFeatures: The Scotty 2.25″ Ball Mount enables anglers to mount larger fish finders on their watercraft It’s designed for 10″-12″ fish finders and offers sturdy and secure holding power Prefabricated holes on the top plate allow easy installation gimbal mount brackets that come with anglers’ fish finders Produced using corrosion proof reinforced nylon Brochure (pdf)

Read more less

X-23BU RitchieSport Compass - Dash Mount - Black/BlueFeatures: 2″ (51 mm) Direct Reading Dial Easily Installed, Fits Standard 2 1/16″ (5.50 cm) Instrument Hole The View Adjusts up to 30 degrees Scientifically Matched Sapphire Jewel & Hardened Steel Pivot Dial Movement Exclusive Built-in Green NiteVu Lighting High-Temperature Composite Construction for Extended Operating Range DirectiveForce Magnets Exclusive 5-Year Ritchie Warranty Specifications:Approx. Shipping Weight: 5oz (142g)Notes: X-23 Compasses do not have Built-in Compensators. It comes standard with 12V lighting Some custom-built OEM models may have different lighting. Specifications: Backlight: Yes Lubber Lines: Yes Mounting Style: Dash Read: Front Box Dimensions: 3"H x 4"W x 5"L WT: 0.55 lbs UPC: 010342171214

Read more less

Suzuki 9.9, 15 Remote Shift/Throttle & Tiller (2014-Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Kronos 4" Tachometer with Hourmeter - 7,000 RPM (Gas - Outboard)Polished Stainless Steel bezel, flat glass lens, perimeter lighted spun aluminum dial with Gold and Black graphics. Gold increments and Logo on dial are Embossed.  All instruments include two piece Newport pointer with White hub. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed above.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.4" - Hole size: 3.375" (85mm)Specifications: 7 character LCD display 0-999999.9 Hours Flat Scratch Resistant Lens Polished Stainless Steel bezel LED Illuminating around the Perimeter of the Dial Newport style White Pointer Factory P/N TCH305*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer w/Hourmeter Series: Kronos Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Set: No Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 759266390409 Quick Guide (pdf)

Read more less

PilotLINK2 Class A Pilot Plug WiFi InterfaceThere are well over 100,000 Class A AIS systems installed on vessels globally. While the latest Class A AIS transponders (like the Digital DeepSea CLA2000) already have a wireless interface incorporated for iPad and tablet connectivity, many systems just use a standardized “Pilot Plug” wired interface. This Amphenol standard multi-pin design allows NMEA AIS and GPS data to be accessed from the transponder and pilots and delivery captains would use a simple USB interface cable for their personal PC-based ECDIS system. However, more and more captains now choose to use an iPad or tablet so need wireless connectivity.PilotLINK2 allows these Class A transponders to interface with the latest range of mobile devices including iPhones, tablets, and PCs/MACs. Applications range from maritime pilots to survey ship charter users who may want access to the ship’s AIS and GPS data.Features: Connects to any standard “Pilot Plug” connector USB powered for easy portability power from any USB source, adaptor, or power pack Creates secure password protected wifi network Can also join another wifi network if preferred Easy web interface with useful diagnostics display and Class A static, dynamic, and voyage data displays Works with 100’s apps iSailor, Navionics, iNAVx, NavLINK, TZ iBoat, Imray, NV Charts, AquaMaps, Weather 4D, etc TCP/IP and UDP protocols supported The raw data log function InterfaceSet up of PilotLINK is simple using any web browser on the connected device. View data, set up wireless passwords or join another wireless network and also view Class A AIS status. Your favourite apps connect using TCP/IP or UDP protocols.The data monitor shows a list of raw NMEA data. You can also log this data for analysis if required. Brochure (pdf)

Read more less

LinkUp Intelligent Battery Sensor Gateway - 12V - 500AHEasily installed LinkUp gateway modules replace the original wiring, delivering power to the LinkUp device and sensor from the NMEA 2000 backbone while still compliant with the NMEA 2000 certification. Thanks to their passive wireless receiver, the configuration is done in a snap using your mobile device, and the LinkUp Configurator app is available for Android and iOS devices. The sensor parameters are configured to type, instance, and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download.Features: NMEA 2000® certified Wireless configuration through companion mobile App Status LED Plug-and-Play installation and configuration Specifications: Operating voltage - 6-18V Permanent load current - ±200A Maximum current - ±1500A Maximum battery capacity - 500Ah Threaded GND bolt - M6 Power consumption - ≤ 15 mA (normal mode) Output signal - NMEA 2000® Dimensions - 125mm x 32mm (+cables) Protection class - IP X9/K (LinkUp) IP6K7 (Sensor) Operating temperature - -40°C to +115 °C Flammability - UL94 Housing material - PC-FR Compliance - CE, UKCA, Reach, RoHS, ISO8846:1990 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

UC H5 HELIX 5 CoverFeatures: Protects lens during storage Durable, Easy-On Neoprene Design Easily rolled or folded for storage in small compartments WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Covers Box Dimensions: 2"H x 7"W x 9"L WT: 0.3 lbs UPC: 082324045943

Read more less

12V Non-Fused Multi-Connection SystemWith more and more electronics being used in boating, this product allows up to four electronics or accessories to be connected to a single battery easily and correctly every time. Do it yourself.Depth finders, shallow water anchors, lights, downriggers, radios, GPS, chargers, and power panels, are the perfect way to connect your electronics correctly every time.Protect your expensive electronics, with fused connectors to safeguard expensive electronics, connect a 12V trolling motor to our 10 AWG lead for up to 15 AMP draw and three 14 AWG leads for up to a 10 AMP draw to allow multiple electronics to be quickly and easily connected and disconnected to a battery.Remove expensive batteries for storage, replacement, or theft protection in seconds.Once the products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly, by simply snapping the connectors together.Features: Multi 4 fused connection system to power your outdoor equipment easily and quickly Plug & Play Connections Suitable for use t-40° to 221° UL1977 120 Amp Rating Lithium Compatible One-year Warranty Salt Water Approved Made In the USA

Read more less

12V Multi-Fused Connection SystemWith more and more electronics being used in boating, this product allows up to four electronics or accessories to be connected to a single battery easily and correctly every time. Do it yourself.Depth finders, shallow water anchors, lights, downriggers, radios, GPS, chargers, and power panels, are the perfect way to connect your electronics correctly every time.Protect your expensive electronics, with fused connectors to safeguard expensive electronics, connect a 12V trolling motor to our 10 AWG lead for up to 15 AMP draw and three 14 AWG leads for up to a 10 AMP draw to allow multiple electronics to be quickly and easily connected and disconnected to a battery.Remove expensive batteries for storage, replacement, or theft protection in seconds.Once the products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly, by simply snapping the connectors together.Features: Multi 4 fused connection system to power your outdoor equipment easily and quickly Plug & Play Connections Suitable for use t-40° to 221° UL1977 120 Amp Rating. Lithium Compatible One-year Warranty Salt Water Approved Made In the USA 

Read more less

NavPilot 711C f/OutboardsIncludes: NavPilot 711C Control Unit FAP7002 Processor Unit PG700 Heading Sensor, NMEA 2000 Kick back, relax and let NavPilot steer you to your destination!FURUNO's NavPilot is a revolutionary autopilot with a sunlight viewable display designed for a variety of vessels. It utilizes a self-learning and adaptive software algorithm, and plays the ultimate role in course-keeping capability. NavPilot dynamically adjusts essential parameters during navigation, such as vessel speed, trim, draught, tide and wind effects, dead band, weather and more. These parameters are stored in system memory and continuously optimized to make the NavPilot more versatile.The new NavPilot 711C features a color day/night graphic display, offering much better sunlight viewability during the day while not affecting your night vision when the sun goes down.Self-learning and adaptive softwareFrom the first dock-side setup through the last voyage you made, NavPilot continues to learn your vessel's steering characteristics, allowing for real-time, dynamic adjustments to make the boat's steering more accurate.SAFE HELM and POWER ASSIST features provide Efficient and Effective Helm Steering ControlThe optional SAFE HELM and POWER ASSIST features provide a unique interface to the vessel's hydraulic hand steering system, providing unrivaled comfort and control of steering directly from any manual helm on the vessel. These two modes greatly reduce steering effort and enhance the safety of your autopilot.The POWER ASSIST mode incorporates the SAFE HELM concept and provides speed-based, power assisted steering, which greatly reduces manual helm effort in maneuvering situations. POWER ASSIST is a unique helm-activated assisted steering feature that can augment or replace separate electric and power-robbing, engine-driven power steering systems on many vessels. POWER ASSIST reduces steering system complexity and costs while increasing economy.SAFE HELM and POWER ASSIST modes will require the optional FPS8 Power Steering Module and an appropriate HRP Pumpset.If you are interested in utilizing the SAFE HELM and POWER ASSIST features, it is highly recommend that, when installing the NavPilot 700 Series Autopilot, the optional FPS8 Power Steering Module is purchased and installed at the same time. This will eliminate the need to re-plumb the hydraulic system and run additional connection cables in the future.FishHunter modeFishHunter mode is a unique feature of FURUNO's NavPilot series. Find a fish target with your FURUNO sonar/sounder or bird target with your FURUNO radar and feed it to the NavPilot The NavPilot will activate the FishHunter mode to perform square, zigzag, circle, orbit, spiral or figure-eight maneuvers around the specified target at a user selected distance. This feature can also be used for Man Overboard (MOB).Furuno's new NavPilot series is designed to match the NavNet 3D, FI-50 Instrument series and other navigation equipment. The Plug and Play CAN bus interface allows for easy installation and exceptional interface ability.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Steering Type: Hydraulic Box Dimensions: 14"H x 14"W x 28"L WT: 18.75 lbs UPC: 611679355126 Owner's Manual (pdf)Brochure (pdf)

Read more less

HELIX 15® CHIRP MEGA SI+ GPS G4N CHO Display OnlyThe HELIX 15 CHIRP MSI+ GPS G4N CHO features a 15.4" display, MEGA Side Imaging+, MEGA Down Imaging+, Dual Spectrum CHIRP Sonar and internal GPS with Humminbird Basemap. As with all HELIX G4N models, this HELIX 15 includes standard features such as AutoChart Live, Wi-Fi and NMEA 2000®, in addition to Bluetooth® and Ethernet networking for compatibility with the One-Boat Network™ family of products from Humminbird, Minn Kota and Cannon. This CHO (Control Head Only) model allows you to pick the right accessory transducer for your needs, including compatibility with Minn Kota Built-in MEGA Imaging trolling motors. Features: Control Head Only Model: This model does not include a transducer. This CHO model is a great choice for those looking to connect to connect to Built-in MEGA Imaging on Minn Kota trolling motors, accessory transducer options like MEGA 360 Imaging, or share sonar data from an existing Humminbird Ethernet network.  Keypad control: Master HELIX at the touch of a button. Access the preloaded views from the user-friendly menu system, operated by soft key controls that allow you to reliably operate your fish finder in any condition. MEGA Side Imaging+: See the world below like never before with a crystal-clear Side Imaging viewing out to 200 feet on either side of your boat. You'll unlock more fish and structure with 20% more detail and 60% more range capability than MEGA Side Imaging sonar. MEGA Down Imaging+: Get unprecedented underwater clarity with Down Imaging coverage down to 200 feet below your boat. You'll unlock more fish and structure with 20% more detail and 60% more depth capability than MEGA Down Imaging sonar. Dual Spectrum CHIRP sonar: Before you cast, know what's down there thanks to highly-detailed fish arches and a clear view of fish-holding structure and the bottom. Powered by our proprietary, Low-Q CHIRP transducer, Dual Spectrum offers two ways to search; Wide Mode for maximum coverage and Narrow Mode for focusing on the slightest detail. Internal GPS and Humminbird Basemap: Our enhanced basemap provides you with a clear view of underwater terrain and surrounding points of interest so you can fish and navigate with total confidence. Identify buoys, day markers, hazards, marinas, contours, depth markers and much, much more. Includes charts of more than 10,000 lakes, plus coastal coverage for the continental U.S. Premium Chart Compatible: Humminbird provides the most complete offering of premium chart options to anglers everywhere. Get a complete view of the world below with optional charts from Humminbird's LakeMaster® and CoastMaster™ products, as well as your choice of compatible Navionics® charts.  AutoChart Live: Create real-time maps of your fishing spots, with access to patented Humminbird® LakeMaster® features. Map depth contours, bottom hardness and vegetation as you drive your boat.  Comes standard with eight (8) hours of built-in recording time and is compatible with AutoChart Zero Line SD cards for virtually-endless AutoChart Live mapping capacity. One-Boat Network Compatible: Many Humminbird models seamlessly integrate and communicate with Minn Kota and Cannon products to unlock more features and capabilities for anglers everywhere. Make the more of your time on the water with the exclusive boat control and fish-catching features of the One-Boat Network.  Ethernet Networking: High-speed Ethernet allows you to build a powerful, professional-grade fishing system. Easily connect multiple fish finders, or upgrade to add-on technologies like Minn Kota i-Pilot Link and Humminbird CHIRP Radar. Bluetooth: Take control right from the screen of your Humminbird with wireless communication to compatible Talon and Raptor shallow water anchors, as well as Cannon Optimum downriggers. Additional features include wireless software updates from the Humminbird FishSmart App and display of smart phone notifications on your Humminbird.  NMEA 2000 networking built-in: Connect an accessory NMEA 2000 network to your control head for even more information; from boat performance to weather and water conditions, make sense of it all with NMEA 2000 networking. Includes control head, power cable, gimbal mounting bracket. This CHO model does not include a transducer, allowing you to pick the best fit for your rigging needs. 2-Year Limited Warranty Specifications: Screen Size: 15" Cartography Brand: Humminbird/Navionics Transducer Included: No Touchscreen: No Box Dimensions: 12"H x 15"W x 22"L WT: 16.15 lbs UPC: 082324055782 Brochure (pdf)

Read more less

HELIX 15® CHIRP MEGA SI+ GPS G4NThe HELIX 15 CHIRP MSI+ GPS G4N features a 15.4" display, MEGA Side Imaging+, MEGA Down Imaging+, Dual Spectrum CHIRP Sonar and internal GPS with Humminbird Basemap. As with all HELIX G4N models, this HELIX 15 includes standard features such as AutoChart Live, Wi-Fi and NMEA 2000®, in addition to Bluetooth® and Ethernet networking for compatibility with the One-Boat Network™ family of products from Humminbird, Minn Kota and Cannon.Features: Keypad control: Master HELIX at the touch of a button. Access the preloaded views from the user-friendly menu system, operated by soft key controls that allow you to reliably operate your fish finder in any condition. MEGA Side Imaging+: See the world below like never before with a crystal-clear Side Imaging viewing out to 200 feet on either side of your boat. You'll unlock more fish and structure with 20% more detail and 60% more range capability than MEGA Side Imaging sonar. MEGA Down Imaging+: Get unprecedented underwater clarity with Down Imaging coverage down to 200 feet below your boat. You'll unlock more fish and structure with 20% more detail and 60% more depth capability than MEGA Down Imaging sonar. Dual Spectrum CHIRP sonar: Before you cast, know what's down there thanks to highly-detailed fish arches and a clear view of fish-holding structure and the bottom. Powered by our proprietary, Low-Q CHIRP transducer, Dual Spectrum offers two ways to search; Wide Mode for maximum coverage and Narrow Mode for focusing on the slightest detail. Internal GPS and Humminbird Basemap: Our enhanced basemap provides you with a clear view of underwater terrain and surrounding points of interest so you can fish and navigate with total confidence. Identify buoys, day markers, hazards, marinas, contours, depth markers and much, much more. Includes charts of more than 10,000 lakes, plus coastal coverage for the continental U.S. Premium Chart Compatible: Humminbird provides the most complete offering of premium chart options to anglers everywhere. Get a complete view of the world below with optional charts from Humminbird's LakeMaster® and CoastMaster™ products, as well as your choice of compatible Navionics® charts.  AutoChart Live: Create real-time maps of your fishing spots, with access to patented Humminbird® LakeMaster® features. Map depth contours, bottom hardness and vegetation as you drive your boat.  Comes standard with eight (8) hours of built-in recording time and is compatible with AutoChart Zero Line SD cards for virtually-endless AutoChart Live mapping capacity. One-Boat Network Compatible: Many Humminbird models seamlessly integrate and communicate with Minn Kota and Cannon products to unlock more features and capabilities for anglers everywhere. Make the more of your time on the water with the exclusive boat control and fish-catching features of the One-Boat Network.  Ethernet Networking: High-speed Ethernet allows you to build a powerful, professional-grade fishing system. Easily connect multiple fish finders, or upgrade to add-on technologies like Minn Kota i-Pilot Link and Humminbird CHIRP Radar. Bluetooth: Take control right from the screen of your Humminbird with wireless communication to compatible Talon and Raptor shallow water anchors, as well as Cannon Optimum downriggers. Additional features include wireless software updates from the Humminbird FishSmart App and display of smart phone notifications on your Humminbird.  NMEA 2000 networking built-in: Connect an accessory NMEA 2000 network to your control head for even more information; from boat performance to weather and water conditions, make sense of it all with NMEA 2000 networking. Includes control head, transom mount transducer and mounting hardware, power cable, gimbal mounting bracket. 2-Year Limited Warranty Specifications: Transducer Included: Yes Touchscreen: No Included Transducer: XM-9-HW-MSI-T Cartography Brand: Humminbird/Navionics Screen Size: 15" Box Dimensions: 12"H x 15"W x 22"L WT: 18.4 lbs UPC: 082324054792 Brochure (pdf)

Read more less

B924 Class B AIS Transceiver with WiFi, Bluetooth & VHF Antenna Splitter - 2W CSTDMA**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**Click here to download form.The most feature-rich 2W CSTDMA AIS transceiver in the B900 range. The B924 includes WiFi & Bluetooth for seamless wireless connectivity and AIS data streaming to any mobile device, PC, or wearable, with an integrated VHF antenna splitter to enable your transceiver to share your existing VHF antenna without any loss of performance. Like all B900 transceivers, it also includes an integrated next-generation GPS receiver and antenna and is designed for em-trak's unique FLEXI-FIT® bracket system to make installation as easy as possible.Exceptionally lightweight and completely weatherproof, the B924 delivers the very best (2W) AIS receive and transmit performance, so you see all AIS information and targets, even at maximum range. Your transceiver will also work with our CONNECT-AIS mobile phone app to make programming, configuration, and transceiver health monitoring simple and convenient.Features: Certified AIS Class B – 2W CSTDMA Integrated WiFi and Bluetooth Integrated VHF antenna splitter Global certification - USCG / FCC / Canada / Europe SRT-AIS™ Transceiver Engine for superlative proven performance FLEXI-FIT™ bracket system for easy, convenient, and secure installation Internal high-performance GPS receiver and antenna (external antenna optional) Water, pressure spray, and damp proof (IPx6, IPx7 certified) Protected from vibration, shock, and extreme temperatures Small and lightweight Ultra-low power consumption – best in class Guaranteed connectivity and interoperability with any app, chart plotter, smartphone, tablet, or PC NMEA 0183 & NMEA 2000 Automated health and performance monitoring Silent mode (transmit-off) function Enhanced RF screening to protect against electromagnetic interference Built-in power surge protection Physical & Environmental Specifications: Size (H x W x D): 150 x 115 x 45mm Weight: 425kg Operating temperature: -25°C to +55°C Storage temperature: -25°C to +70°C Ingress protection: IPx6 and IPx7 Electrical Specifications: Supply voltage: 12V or 24V DC Supply voltage range: 9.6V - 31.2V DC Average current (at 12V): 280mA Average current (at 12V) (wireless off): 245mA Peak current: 2A Average power consumption (at 12V): 3.4W Average power consumption (at 12V) (wireless off): 2.9W Galvanic isolation: NMEA 0183 inputs only, NMEA 2000, VHF antenna port Connectors: VHF antenna: SO-239 VHF radio: SO-239 GNSS: TNC Power: 12-way circular multipole NMEA 2000: 5-way Micro-C connector USB: USB Micro-B Data Interfaces: NMEA 0183: 2 x bi-directional ports NMEA 2000: NMEA 2000 Ed 3.101, LEN=1 USB: PC virtual com port for NMEA 0183 data WiFi: IEEE 802.11 (a/b/g), client and access point mode supported (2 connections in access point mode) Bluetooth: BT Classic 4.0, 7 concurrent connections Standards Compliance: AIS standards: IEC 62287-1 Ed. 3, ITU-R M.1371.5 Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008 Environmental standards: IEC 60945 Ed. 4 Serial data interface standards: IEC 61162-1 Ed 5.0, IEC 61162-2 Ed 1.0 NMEA 2000: NMEA 2000 Ed 3.101 GNSS performance standards: IEC 61108-1 Ed 2.0, IEC 61108-02 Ed 1.0 GNSS: Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo) Channels: 72 Internal/external antenna: Internal or optional external antenna Time to first fix from the cold start: 26s VHF Transceiver: VDL access scheme: CSTDMA Operating frequency: 156.025MHz - 162.025MHz Channel bandwidth: 25kHz Receivers/transmitters: 2 x receivers, 1 x transmitter AIS receiver sensitivity (20% PER): -111dBm AIS transmitter power: 2W (+33dBm) User Interface:Indicators: Power, transmit timeout, error, silent modeIn the Box: 1 x AIS transceiver 1 x Power and data cable (2M) 1 x VHF radio accessory cable 1 x FLEXI-FIT™ mounting bracket Complete with screws & optional fixing tape This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: AIS Class: B Antenna Included: Yes Display Included: No Function: Receive/Transmit GPS Included: Yes Box Dimensions: 6"H x 7"W x 7"L WT: 2.25 lbs UPC: 672975210533 Quick Guide (pdf)Brochure (pdf)

Read more less

Graph Power "Pro" - 14-18' Console BoatsThe latest in powering your Electronics designed for powering today's Locators Graph, and networking, 13ft of 8 gauge sheathed marine grade wire with 3 fused connections for your ConsoleFeatures: 8ft of 10 gauge sheathed marine grade wire for your front deck (bow) equipment 3 fused connections This kit provides protection and limits RF interference, to power your graphs, pucks, GPS, and NEMA boxes directly from your battery for the best performance and to meet Manufacturers' recommendations.  30 Amp fused at the battery and your choice of 3 or 5 Amp at the fused connections.  Connect-Ease is the best in Marine grade connections, heat shrinkable crimped connections are waterproof, vibration, and interference. Pro Fisherman and guides have experienced that to get the best performance from your electronics use this product to connect them directly to a lithium battery. Lithium Compatible

Read more less

Yak Max Pro Kayak Single Battery with Trolling Motor“Amp” up your fishing kayak with YAK MAX PRO, rigging designed to network multiple graphs, live imaging and forward-facing sonar transducers and black boxes, as well as a trolling motor all from an easy, self-contained pack-in/pack-out power rigging solution. Works with any Minnkota, Motorguide, Humminbird, Garmin, Lowrance, etc.Designed for serious kayak angers using multiple electronics, Graphs Forward and side imaging Fused Connections Protect your valuable electronics. Heat shrinkable splices allow for a lifetime of corrosion-free connections. Leave your wiring and rigging intact and remove your w-electronics and battery with ease. 18" of positive and negative 8 gauge trolling motor rigging with 3 connections and a quick snap battery connection allows you to spend more time on the water and less time preparing to fish.Features: Lithium Compatible Pro Tested

Read more less

Quick Connect with Accessory Port 6 GaugeConnect your outboard and extra accessories with this easy-to-use kit.Use the CE12VB4K, CE12VB4FK, CE12VB5K, or CE12VB5FK products to connect all of your marine, accessories, equipment, downriggers, and more to your main battery.Connect and disconnect with a simple click. Take your battery with you when leaving your boat unattended, or in storage, or use it with a CE12VB1S to keep a spare battery handy just in case.Features:Lithium Compatible

Read more less

Multi 5 Lead Accessory Connection SystemWith more and more electronics being used in boating, this product allows up to five electronics or accessories to be connected to a single battery easily and correctly every time.Connect any marine equipment including Depth Finders, GPS Units, Radios, Lights, Pumps, Aerators, and more to one of the 14 AWG leads (10 AMP draw) to allow multiple electronics to be quickly and easily connected and disconnected to a battery. Remove expensive batteries for charging, storage, replacement, or theft protection in seconds.Once the products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly, by simply snapping the connectors together.Features: Multi 5 connection system to power your outdoor equipment easily and Quickly. Plug & Play Connections Lithium Compatible. Suitable for use t-40° to 221° UL1977 120 Amp Rating. Lithium Compatible UL1426 Tinned Marine Grade Wire One-year Warranty – Salt Water Approved 5- 14 AWG 5” Leads 1 - 6 AWG Easy 12V Battery Connector 120 AMP Rating Made In the USA

Read more less

Graph Power TillerDesigned for powering today's Locators Graphs, and networking, 10ft of 10 gauge marine grade wire nylon sheathed for protection and to limit RF interference, 3 fused connections to power your graphs, pucks, GPS, and NEMA boxes directly from your battery for the best performance and to meet Manufacturers recommendations. Features: 30 Amp fused at the battery and your choice of 3 or 5 Amp at the fused connections. Connect-Ease uses the best marine grade connections, heat-shrinkable crimped connections are waterproof, vibration, and interference Lithium Compatible

Read more less

Yak Quick 3 Device Connection SystemThe CONNECT-EASE YAK QUIK represents our most simple, yet quick and easy way to send power to your kayak fishing devices/accessories.YAK Quik is a power solution for up to three powered kayak fishing accessories, all with a convenient and easy pack-in/pack-out battery connection.As kayak fishing has grown in popularity, so have the needs of today’s technologically savvy kayak angler. From tournament kayak anglers to guides to avid fishermen, women, and youth, many anglers are now rigging their watercraft with live imaging, forward-facing sonar, trolling motors, shallow-water anchors, lighting, GoPros/POV cameras, etc. Features: CONNECT-EASE YAK QUIK represents our most simple, yet quick and easy way to send power to your kayak fishing devices/accessories. Connect multiple graphs, live imaging, and forward-facing sonar transducers. With kayaks and Ice fishing becoming more sophisticated, quick, and easy, systems to connect to lithium and other mobile power supplies for graphs sonar, cell phones, GoPro, lights, and glow rings are essential. Plug & Play connections Lithium Compatible

Read more less

Graph Power "Pro" - 19-22' Console BoatsDesigned for powering today's Locators Graph, and networking, 16ft of 8 gauge sheathed marine grade wire with 4 fused connections for your Console.Features: 13ft of 8 gauge sheathed marine grade wire for your front deck (bow) equipment with 4 fused connections. This kit provides protection and limits RF interference,  to power your graphs, pucks, GPS, and NEMA boxes directly from your battery for the best performance and to meet Manufacturers' recommendations.  30 Amp fused at the battery and your choice of 3 or 5 Amp at the fused connections.  Connect-Ease uses the best in Marine grade connections, heat shrinkable crimped connections are waterproof, vibration, and interference. The Pro Fisherman and guides have experienced that to get the best performance from your electronics use this product to connect them directly to a lithium battery. Lithium Compatible

Read more less

Multi 5 Fused Lead Accessory Connection SystemWith more and more electronics being used in boating, this product allows up to five electronics or accessories to be connected to a single battery easily and correctly every time.With fused connectors to safeguard expensive electronics, connect any marine equipment including Depth Finders, GPS Units, Radios, Lights, Pumps, Aerators, and more to one of the 14 AWG leads (10 AMP draw) to allow multiple electronics to be quickly and easily connected and disconnected to a battery. Remove expensive batteries for charging, storage, replacement, or theft protection in seconds.Once the products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly, by simply snapping the connectors together.Features: Multi 5 fused connection system to power your outdoor equipment easily and quickly Plug & Play Connections  Lithium Compatible Suitable for use t-40° to 221° UL1977  120 Amp Rating. UL1426 Tinned Marine Grade Wire One-year Warranty Salt Water Approved Made In the USA

Read more less

Spade-A-Nator Spade Style Battery Connection KitThe CONNECT-EASE SPADE-A-NATOR is the perfect solution for adding extra power for long days on the water—or for simple recharging at the end of the day without the hassle of removing your chosen battery from your fish-finder/graph shuttle or case.  YAK EASE SPADE-A-NATOR is a solution for up to three powered kayak or ice fishing accessories, all with a convenient and easy pack-in/pack-out battery connection for easy removal charging, and swapping of multiple batteries to power your fishing day.Features: CONNECT-EASE SPADE-A-NATOR is the perfect solution for adding extra power for long days on the water—or for simple recharging at the end of the day without the hassle of removing your chosen battery from your fish-finder/graph shuttle or case. Tournament kayak and ice anglers, guide avid fishermen, women, and youth, many anglers are now rigging their watercraft with live imaging, forward-facing sonar, trolling motors, shallow-water anchors, lighting, GoPros/POV cameras, etc. Connect multiple graphs, live imaging, and/or forward-facing sonar transducers. With kayaks and Ice fishing becoming more sophisticated there comes a need for quick, easy, systems to connect to lithium and other mobile power supplies for graphs sonar, cell phones, GoPro, lights, and glow rings are essential. Plug & Play Connections are Lithium Compatible Lithium Compatible

Read more less

Yak-Ease Graph PowerYAK EASE GRAPH POWER is a permanent power solution for up to three powered kayak fishing accessories, all with a convenient and easy pack-in/pack-out battery connection.From the get-go, GRAPH POWER was designed to solve the connections and power issues associated with running today’s sophisticated fishing electronics common on modern Kayaks, providing clear, clean power and direct connections. Now that extends into the realms of kayak angling and ice fishing with numerous new, problem-solving rigging and power distribution products.GRAPH POWER is designed to work with all manufacturers of fresh- and saltwater marine electronics. GRAPH POWER features marine-grade sheathed wire with multiple fused connections for your electronics. Works with Humminbird, Lowrance, Garmin, Forward side, and down imaging systems. Power multiple electronics, GO Pro, phones, and others with pouring fused connections.Features: CONNECT-EASE SPADE-A-NATOR is the perfect solution for adding extra power for long days on the water - or for simple recharging at the end of the day without the hassle of removing your chosen battery from your fish-finder/graph shuttle or case. From tournament kayak anglers to guides to avid fishermen, women, and youth, many anglers are now rigging their watercraft with live imaging, forward-facing sonar, trolling motors, shallow-water anchors, lighting, GoPros/POV cameras, etc. With kayaks and Ice fishing becoming more sophisticated there comes a need for quick, easy, systems to connect to lithium and other mobile power supplies for graphs sonar, cell phones, GoPro, lights, and glow rings are essential. Plug & Play connections are Lithium Compatible Lithium Compatible

Read more less

Micro Field-Attachable ConnectorField-attachable connectors allows you to make field connections to bulk cable. The color-coded screw terminals match the individual wire colors found within the bulk cable for error-free field installation.Color-coded screw terminals make for error-free field installation Rugged housing material designed to withstand harsh marine environments Specifications: Connection Gender: Male Box Dimensions: 2"H x 2"W x 2"L WT: 0.5 lbs UPC: 873804001692

Read more less

2" Oil Pressure Gauge - 80 PSIFaria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.  All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment.  A pressure gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure.2" - Hole size: 2.0625" (53mm)Specifications: Domed Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Blue LED Illuminating around the Perimeter of the Dial Illuminated Backlit Fire-Orange Tip Pointer Factory P/N GP5089*Sold as an Individual*Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Series: Platinum Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Gauge Type: Oil Pressure Box Set: No Box Dimensions: 3"H x 4"W x 4"L WT: 0.3 lbs UPC: 759266220249 Brochure (pdf)

Read more less