Fuel Level Sensor Single Station with Seal Kit #432 - 12/24V - 3-180 OHM - 150-160mm LengthFuel Level Sensor (resistive) with adjustable lever, sealing kit N05-801-432.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Tilt/Swivel Mount with Quick-Release Cradle f/echoMAP™ Plus 6XcvSurface mount your compatible echoMAP Plus chartplotter/sounder combo using our bail mount with knobs; the mount tilts and swivels for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows you to seat/unseat your device with ease.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 7"W x 11"L WT: 0.9 lbs UPC: 753759188801

Read more less

Wind Transducer with 30M CableElegant, Accurate & AffordableThe FI5001 is an analog Wind Transducer for use with the FI50 and FI70 series of instrument displays. It is capable of detecting wind angle accuracy of better than ±10° and wind speed accuracy of better than ±5% (20 kt). The FI5001 has a power requirements of less than 40 mA on a 12VDC system.Important Note: The FI5001 Sensor does not come with a cable as standard, while the FI5001/30M comes with a 30 meter cable. Available 30 meter and 50 meter cable kits include a junction box.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Airmar B744VL 200/50kHz Bronze Long Stem Thru-hull Transducer (8-pin)010-10193-22Our bronze, thru-hull mount long stem transducer provides depth, speed and temperature data. This transducer has an operating frequency of 50 or 200 kHz and mounts on a 0-28° deadrise angle.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Temperature: Yes Speed Included: Yes Pins: 8 Mounting Style: Thru-Hull Imagining: Standard Chirp: No Cable Length (Feet): 39' Box Dimensions: 3"H x 12"W x 16"L WT: 8.9 lbs UPC: 753759971793 Owner's Manual (pdf)Brochure (pdf)

Read more less

FI5001The FI5001 is an analog Wind Transducer for use with NavNet 3D and the FI50 series of instrument displays. It is capable of detecting wind angle accuracy of better than 10° and wind speed accuracy of better than 5% (20 kt). The FI5001 has a power requirements of less than 40 mA on a 12VDC system.Important Note: The FI5001 Sensor does not come with a cable as standard. Please select a 30 meter or 50 meter cable kit when ordering the FI5001 Wind Sensor.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Transom Mount Speed SensorTransom-mount paddle wheel 3.1 m (10ft) cable with Micro-C connector.Features Replaces EP-70 Outputs speed through water Transom-mount paddle wheel Ideal for slow, trolling speeds, where GPS is not as accurate Share paddle wheel speed to any networked display, unlike sonar based paddlewheel sensors

Read more less

Suncover for Elite-9 Ti & Ti²Protective Suncover for Elite-9 Ti and Elite-9 Ti² Displays. Specifications: Type: Covers Box Dimensions: 1"H x 7"W x 11"L WT: 0.65 lbs UPC: 9420024159293

Read more less

NSX 3015UW - No TransducerExpand your horizons with the world's first fully-featured ultrawide marine display. NSX® ULTRAWIDE brings all the benefits of dual screens to a single display for our most immersive experience yet. Get a truly unique, eye-catching dash, see apps as they were meant to be seen, and experience C-MAP®'s X-Gen charts in more detail than ever. Get a fresh perspectiveNSX ULTRAWIDE offers a new perspective on boating. Discover an all-new aspect ratio for our most immersive on-the-water experience yet.Simpler boating with our latest operating systemNSX ULTRAWIDE also delivers game-changing simplicity. Use the intuitive activities bar to pin your favorite apps and switch between them with a single touch. And the fully customizable instruments panel lets you make NSX your own, ensuring you always have the right data at hand, and nothing more.The simplified interface means you’ll spend less time navigating menus, and more time navigating waters. And that’s quicker, too – with our fastest-ever auto-routing calculating routes in one third of the time.Superior engine controlConnectivity is at the heart of NSX ULTRAWIDE. The display feeds more information than ever to the helm, giving superior control over the full suite of on-board technology.It all begins with superior engine control. Nobody integrates better with Mercury® than we do, and NSX ULTRAWIDE also offers superior integration with other leading propulsion brands such as Honda and Suzuki.Bow-to-stern integrationControl with NSX ULTRAWIDE extends across the entire vessel, with support for CZone® digital switching, RGBW lighting, IP cameras, and audio – with an intuitive Setup Wizard to help you get it all connected.Your fishing superpowerAnglers benefit from leading sonar tech like FishReveal™ and Active Imaging®, providing high-res images 300 feet to the sides and below your boat. Compatibility with a wide range of 1kW transducers means you can fish even the deepest waters.*Requires additional sonar module and minimum 1.7 software updateFeatures: See near and far with full support for 3G, 4G, and HALO® radars Easy autopilot integration with NAC-1, NAC-2, NAC-3 and NAC-D pilots Simrad® App integration for Waypoint management and offline trip planning Third-party integration  Now compatible with SiriusXM® WM-4 Weather and Fish Mapping with 1.9 software update Best-in-class Mercury® Integration, inc. SmartCraft® Connect Integration with leading propulsion brands such as Honda and Suzuki CZone® digital switching OmniSense Dometic Lumishore lighting Multiple audio partners IP cameras HTML5 app compatible Much, much more... Charts and Navigation  Optimized for C-MAP® DISCOVER™ X AND REVEAL™ X charts X-Chart Manager 3x faster autorouting* *vs SIMRAD® GO  Fishfinding & Sonar Capabilities  Sonar sharing between NSX® devices Compatible with Active Imaging™, featuring CHIRP, SideScan, and DownScan Imaging™, as well as the S3100 & S5100 sonar modules* *Requires minimum 1.7 software update   Network Connectivity  Wireless Ethernet USB NMEA 2000® Additional Features: The latest Simrad® operating system, for game-changing ease of use Ultrawide SolarMAX™ IPS HD touchscreen with extreme viewing angles Intuitive setup wizard Bracket mount sold separately Specifications: Screen Size: 15" Transducer Included: No Box Dimensions: 7"H x 14"W x 25"L WT: 10 lbs UPC: 9420064135738

Read more less

Suncover for HDS-9 Gen3Make sure your fishfinder/charplotter continues to work like new by protecting it with the Lowrance sun cover. This sturdily made cover fits your GPS system perfectly. It protects your GPS from overexposure to sun glare during long boat trips. The cover is UV ray resistant. Works with all HDS-9 Gen3 units. Specifications: Type: Covers Box Dimensions: 1"H x 7"W x 11"L WT: 0.4 lbs UPC: 9420024138250

Read more less

1st Watch Wireless Radar w/o Power CableUntether & Explore - Furuno 1st Watch Wireless Radar, that you can access directly from your iOS devices.Move Around & ExploreWith Furuno's 1st Watch Wireless Radar, you can do things previously impossible. You can bring the Radar display whenever you go, even put it on the iPhone in your pocket. Since the display is untethered, you are free to roam the vessel while maintaining full situational awareness of your surroundings. For example, you can bring the Radar display with you when jumping into the cabin quickly to grab fishing gear or other tools needed during your voyage.Easy To Use At 1st GlancePlug in the Radar, set up the free app from App Store and you're good to go. With familiar gestures it's a breeze to use; you can even use two iOS devices simultaneously. The app has been created with simplicity and efficiency in mind, providing reliable information that is easily accessible.Features: 4kW Radar antenna, powerful yet compact in size (same housing as DRS2D) Wireless LAN, first Radar in the world accessible from your iOS devies No extra wiring needed except the power source, making installation a breeze Exceptionally simple setup and intuitive operation with user-friendly and free iOS app Extremely economical power consumption Vivid, multi-color Radar target presentation (1/8nm - 24nm) Simple touch interface with familiar gestures User selectable range scale from 0.125 to 24 nm Simultaneously connect and utilize 2 iOS devices, via high-sensitivity wireless signal Power Cable sold as an accessory. 001-266-010-00 Power Requirements: 12-24 VDC Only 24W *Please note: iOS devices and accessories are sold separately and do not come included with this product.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Range - Max (Miles): 24nm Power - Output: 4kW Box Dimensions: 11"H x 21"W x 21"L WT: 18 lbs UPC: 611679357090 Owner's Manual (pdf)Brochure (pdf)

Read more less

Mid Double-Ended Cordset - 1 Meter - BlueDouble-ended cordsets are used for trunk or drop lines and make for a secureconnection and simple timesaving installation. The connectors are keyed forerror-free connection and are waterproof for continued operation even whilesubmerged in the bilge.Features: Rugged, IP68 rated connectors for continued connection integrity inmarine environments Various cable lengths to match installatin requirements Optimized for voltage drop sensitive networks (long runs) because powerpair wires have half the resistance of Micro cable Color: Blue Specifications: Cable Length (Feet): 3' Box Dimensions: 1"H x 6"W x 6"L WT: 0.3 lbs UPC: 873804001906

Read more less

Maretron's DCM100 Monitor is an advanced electronic monitoring device used to measure the voltage and current of any direct current (DC) power source or load. Examples of DC power sources that can be monitored with the DCM100 include batteries, alternators, solar panelts, and wind generators. The DCM100 can also be used to monitor DC loads like inverters, windlasses, DC refrigerators, or any DC branch circuit. When the DCM100 is used to monitor batteries, sophisticated circuitry and software algorithms monitor battery temperature, load current, changing current, and terminal voltage to precisely compute battery state of charge, state of health, and time remaining. To measure current, the DCM100 uses an included state-of-the-art Hall effect current sensor which simply slips over the wire - you don't have to break connections or install connectors as you do with inline shunts used by other solutions. Best of all, the DCM100 is NMEA2000 certified so you can view any and all DC information anywhere on the vessel using a compatible NMEA 2000 display. The DCM100 is a key component of Maretron's N2KView vessel monitoring and control system. Battery Voltage Battery Current Ripple Voltage Battery Case Temperature State of Charge Time Remaining Charge Efficiency FactorWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Micro Double-Ended Cordset - 0.5MMechanical Contact Carrier Mat/Color: Thermoplastic PUR/Blue-Gray Molded Body Mat/Color: Thermoplastic PUR/Blue-Gray Contact Mat/Plating: Brass/Gold Coupling Nut Mat/Plating: Brass/Nickel Connector Outside Diameter: 0.59" Electrical Current Rating: 4.0 Amps Voltage Rating: 250 V Cable Outer Jacket Mat/Color: PVC/Gray Conductor Insulation Material: HDPE (data pair), SRPVC (power pair) Number of Conductors: 4X22 AWG, 22 AWG Drain Wire Shielding (3-Levels): FOIL (Overall), FOIL (Power Pair), FOIL (Data Pair) Environmental Protection Class: IEC IP68, NEMA 1,3,4,6P Temperature Rating: -40° C to 80° C to (-40° F to 176° F)Approvals (Cable) UL: PLTC 75° C Sunlight Resistant E90625, AWM 80° C 300V (Cable) CSA: CMX-OUTDOOR-CMG LL54185 75° C, AWM I/II A/B 80C 300V FT4 NMEA: NMEA 2000 Approved Specifications: Cable Length (Feet): 2' Data Interface: NMEA 2000 Box Dimensions: 1"H x 5"W x 5"L WT: 0.1 lbs UPC: 873804001500

Read more less

2" Gauge BlankCover a 2" gauge hole with Faria's Gauge BlankSpecifications: Fits standard hole for Faria's 2" gauges Black in color ∗ Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Diameter (mm): 51 Diameter (Inches): 2 Color: Black Box Dimensions: 4"H x 4"W x 5"L WT: 0.2 lbs UPC: 759266128613

Read more less

Chesapeake White SS 2" Trim Gauge f/Honda EnginesPerimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.2"- Hole Size: 2.0625" (53mm)For Engine Types:Honda EnginesSpecifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N GP7440*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Box Set: No Gauge Type: Trim Guage Series: Chesapeake White Box Dimensions: 4"H x 5"W x 5"L WT: 0.4 lbs UPC: 759266138896

Read more less

Euro Black 2" Fuel Level Gauge - MetricPerimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.Fuel Level gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the level of fuel.2" - Hole Size: 2.0625" (53mm)Specifications: Anti-scratch glass lens 12 VDC negative ground Perimeter-lighted Black dial Can be adapted for 24 VDC systems Factory P/N GP9357*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Box Set: No Gauge Type: Fuel Level Series: Euro Black Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs UPC: 759266128026

Read more less

Chesapeake White SS 5" Tachometer w/Digital Hourmeter - 6000 RPM (Gas) (Inboard)Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12vDC, Ground and one of the signal sources listed above.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.5" - Hole size: 4.375" (112mm)Specifications: Anti-scratch glass lens Perimeter lighted back light 12 VDC negative ground Can be adapted for 24 VDC systems Scale - 0 to 10000 Hours Factory P/N TC9381*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Box Set: No Gauge Size: 5" Voltage - Input Range (Volts): 12/24 V Gauge Type: Tachometer w/Hourmeter Series: Chesapeake White Box Dimensions: 9"H x 9"W x 9"L WT: 1.35 lbs UPC: 759266338630

Read more less

Chesapeake Black 2" Depth Sounder with In-Hull Transducer Perimeter-lighted black dial with stylish blue and white graphics, polished stainless steel bezel, and domed glass lens.The Depth Sounders from Faria offer a 3-199 foot (1-61meters) depth capability, with an automatic gain control, backlighting for maximum night vision, keel offset, and deep and shallow water alarms. Depth can be read in meters, and feet. With its oversized back-lit display depth can be easily read in any condition. Audible and Visual alarms let the boater know when a shallow or deep water condition exists.  Depth Sounder includes a Faria SN2010 In-hull transducer w/20' cable.2" - Hole Size: 2.0625" (53mm)Specifications: Imperial and Metric Values Domed Glass Anti-fog, Scratch Resistant Lens Programmable Keel Offest  Stainless Steel Bezel 199 Foot (61m) Depth Capability Audible and Visual alarm for Shallow/Deep Water Conditions Factory P/N DS0111*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Depth Sounder Box Set: No Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Series: Chesapeake Black Box Dimensions: 8"H x 8"W x 8"L WT: 2.35 lbs UPC: 759266137516 Quick Guide (pdf)

Read more less

Euro Black 2" Oil Pressure Gauge  (100 PSI)Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens. A pressure gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure.2" - Hole size: 2.0625" (53mm) Specifications: Anti-scratch glass lens 12 VDC negative ground Perimeter-lighted Black dial Can be adapted for 24 VDC systems Dual Scale - Imperial and Metric Factory P/N GP9597*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Oil Pressure Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Box Set: No Series: Euro Black Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs UPC: 759266128453

Read more less

Chesapeake White SS 4" Multifunction GaugePerimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.4" - Hole size: 3.375" (85mm) Multi-Function Gauge Displays: Fuel (E-1/2-F) Voltmeter (10 - 18 VDC) Oil Pressure (0 - 80 PSI) Water Temperature (120 - 220° F) Specifications: Anti-scratch glass lens Perimeter lighted back light 12 VDC negative ground Can be adapted for 24 VDC systems  Factory P/N GF0008*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Multifunction Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Set: No Series: Chesapeake White Box Dimensions: 5"H x 6"W x 6"L WT: 1.05 lbs UPC: 759266338517

Read more less

Transom Mount Transducer - 235kHzWith a low profile this depth unit offers little drag and easy installation for dead rise angles up to 30°. Recommended for boats up to 22' (7M) and speeds up to 55 knotsDesigned with a release bracket to protect against impact damage. Comes with a Faria HW0197 connection to easily connect to a Faria Depth Sounders with a 2-pin Packard connection.Specifications: 25" Cable included HW0197 Connector 235KHz performance Factory P/N SN2011*Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Kronos 4" Tachometer - 6,000 RPM (Gas - Inboard & I/O)Polished Stainless Steel bezel, flat glass lens, perimeter lighted spun aluminum dial with Gold and Black graphics. Gold increments and Logo on dial are Embossed.  All instruments include two piece Newport pointer with White hub. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed above.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.4" - Hole size: 3.375" (85mm)Specifications: Flat Scratch Resistant Lens Polished Stainless Steel bezel LED Illuminating around the Perimeter of the Dial Newport style White Pointer Factory P/N TC9983*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer Series: Kronos Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Set: No Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 759266390041 Quick Guide (pdf)

Read more less

Euro Black 4" Tachometer - 7,000 RPM (Gas - All Outboard)Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.4" - Hole size: 3.375" (85mm)Specifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life Perimeter-lighted Black dial Can be adapted for 24 VDC systems Factory P/N TC9011*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer Series: Euro Black Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Set: No Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 759266328051 Quick Guide (pdf)

Read more less

Chesapeake White SS 2" Water Pressure Gauge (30 PSI)Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.A pressure gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure.2" - Hole size: 2.0625" (53mm)Specifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life 12 VDC negative ground Can be adapted for 24 VDC systems Dual Scale - Imperial and Metric Factory P/N OP1022*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Water Pressure Series: Chesapeake White Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Box Set: No Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 759266138124 Quick Guide (pdf)

Read more less

Chesapeake White SS 2" Trim Gauge (Mercury / Mariner / Mercruiser / Volvo DP / Yamaha - '01 and Newer)Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.2"- Hole Size: 2.0625" (53mm)For Engine Types:(Mercury / Mariner / Mercruiser / Volvo DP / Yamaha-2001 and newer)Specifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N GP9649*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Trim Guage Series: Chesapeake White Gauge Size: 2" Box Set: No Voltage - Input Range (Volts): 12/24 V Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs UPC: 759266138070 Quick Guide (pdf)

Read more less

Kronos 2" Fuel Level Gauge (E-1/2-F)Polished Stainless Steel bezel, flat glass lens, perimeter lighted spun aluminum dial with Gold and Black graphics. Gold increments and Logo on dial are Embossed.  All instruments include two piece Newport pointer with White hub.Fuel Level gauge operates by sending a low amperage current through the gauges's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the level of fuel.2" - Hole Size: 2.0625" (53mm)Specifications: Flat Scratch Resistant Lens Polished Stainless Steel bezel LED Illuminating around the Perimeter of the Dial Newport style White Pointer Factory P/N GP7683*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Fuel Level Series: Kronos Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Box Set: No Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs UPC: 759266190016 Quick Guide (pdf)

Read more less

Simrad Resistance to Frequency Conversion Kit OC15SUK83Required for Simrad Autopilots Specifications: Type: Parts Box Dimensions: 4"H x 7"W x 7"L WT: 0.6 lbs UPC: 628309178062

Read more less

USB-C to USB-A Male Adapter CableConnect your compatible GPSMAP® 9000 series chartplotter to a computer using this 15-foot USB cable and a compatible HDMI cable (sold separately). This water-resistant and secure connection allows you to touch the chartplotter screen to operate the computer, including the ability to see and touch the keyboard on the screen.

Read more less

ECU 10 - Reactor™ 40One of the main components for your Reactor 40 Hydraulic autopilot system, the ECU connects and powers the course computer unit (CCU) and the hydraulic pump, controlling the pump based on information received from the CCU.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Bottom Gasket Mounting Hardware for NightwaveBottom gasket, mounting screws, fuse & fuse holder, adjustment wrenches. This is a SIONYX official accessory.

Read more less

AP44 VRF Medium Capacity Autopilot Pack - AP44, NAC-2, Precision 9 & Pump-2 MK2The AP44 Autopilot Controller combines Simrad Continuum steering technology with a full-color display, intuitive rotary dial and button controls, and modern glass helm styling. Free your hands from the wheel, cruise in comfort, and discover new ways to search for fish; this dedicated controller offers easy access to automated turn patterns, No Drift steering, depth contour tracking, and other advanced pilot features. Connect your chart plotter to add waypoint and route navigation, and enjoy full autopilot control from compatible Simrad displays.Features: Rotary-dial course adjustment with new intuitive autopilot control Optically bonded 4.1-inch color display Easy setup with auto-tuning and calibration Simrad Continuum steering technology Intuitive autopilot control Automated turn patterns No Drift steering Depth contour tracking Low-profile 'Glass Helm' design Low power consumption Certified NMEA 2000® connectivityIntuitive Autopilot Control The point of a dedicated autopilot controller is to enable immediate access to auto-steering functionality, placing key controls within easy reach. Designed with that purpose in mind, the AP44 includes an intuitive interface with just four buttons and a push-to-enter rotary control dialAutomated Turn PatternsYour Simrad autopilot can do much more than keep you on course. The AP44 gives you easy access to a range of built-in turn patterns designed to assist with fishing, diving, or just making a quick and efficient U-turn.Simrad Continuum SteeringEvery Simrad steering innovation builds upon a legacy encompassing over sixty years of autopilot development, which continues today at Simrad Yachting's autopilot research hub in Norway.Easy Setup with Auto-Tuning & CalibrationAutopilot installation and commissioning don't have to be difficult or time-consuming. The AP44 offers automatic tuning to ensure optimal auto-steering performance, with a simple on-screen commissioning process including dockside configuration and sea trial.NAC-2The NAC-2 Autopilot Computer is the brain behind your autopilot system. NAC-2 contains the control algorithms developed to helm a yacht across a broad range of weather conditions and sea-states, alongside the electronics needed to operate a hydraulic or mechanical drive unit, while also interfacing with other components including heading sensors and rudder feedback units. The NAC-2 was designed for boats up to 10M (33') in length and is suitable for low-current hydraulic drives, mechanical drives, or solenoid valves with a current rating of 8 Amps continuous (12 Amps peak).Precision-9The Precision-9 Compass supplies heading and rate-of-turn information to Simrad, B & G, and Lowrance autopilot, radar, and navigation systems. Based on reliable solid-state sensor technology, this compact compass offers easy installation aboard any vesselPUMP-2 MK2The PUMP-2 MK2 Type 1 is a reversible hydraulic steering pump for boats up to 35ft.Unique Selling Points: Heading, Rate Of Turn (ROT), roll, and pitch output over NMEA 2000® Heading and ROT calculated using sensor data from 9 axes of rotation and motion Accurate and reliable solid-state sensor technology Heading accuracy after calibration Easily adjustable mounting bracket allows bulkhead or up-mast installation IPX7 waterproof. Best in class Simple installation with a single NMEA 2000® connection Specifications: Steering Type: Hydraulic Box Dimensions: 9"H x 14"W x 16"L WT: 14.15 lbs UPC: 9420064128211 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Marine Network Adapter Cable - RJ45 (Female) to BlueNet (Female)Adapt the Garmin BlueNet™ Network connector on your Garmin device to the legacy Garmin Marine Network connector. These cables do not replace the need to use a Garmin BlueNet™ 30 gateway. Check compatibility before purchase. Specifications: Type: Cables Box Dimensions: 2"H x 6"W x 8"L WT: 0.25 lbs UPC: 753759336981

Read more less

GT17M-THF SS Mid Band Chirp Transducer - 0° - 1kW - 8-PinDesigned for reduced drag and optimum sonar performance on fishing and cruising boats, this flush-mounted 1 kW mid-band CHIRP (80–165 kHz) transducer clearly defines fish arches, structure, and bottom depth returns on the display.Features: See maximum depth performance to 2,400’ in freshwater Access CHIRP sonar frequency range from 80–165 kHz Search with beamwidths of 9–18 degrees Count on fast-response water temperature sensing The thru-hull design offers flush installation with a 0-degree tilt Auto-ID enables simple plug-and-play operation Midband Chirp Traditional SonarThis 8-pin 1 kW stainless steel thru-hull transducer features high-definition mid-band CHIRP sonar that clearly defines fish targets and structures down to 1,800’ in saltwater and 2,400’ in freshwater.Broad Frequency RangeUse the perfect frequency for the waters in which users are fishing. Covering the medium frequency range, this transducer pulses from 80–165 kHz, displaying a wide coverage area, clear fish arches, and accurate depth readings.Optimum Ping SensitivityOffering excellent sonar sensitivity, low noise, high resolution, and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on the compatible chartplotter display.Thru-Hull InstallationA durable stainless steel housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns.Auto-ID TechnologyEnjoy simple plug-and-play operation with Garmin auto-identification technology, which enables the sonar to automatically configure itself to the transducer being used.Fits Various Hull TypesConfigurable for a wide variety of boat hull materials, including fiberglass, composite, steel, aluminum, and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0–24 degrees without a fairing block.In the Box: GT17M-THF transducer Jam nut Spacer 2 washers 2 set screws Thread isolator Hull isolator Documentation Specifications: Transducer Frequency: Medium band CHIRP (80-165 kHz) Transducer Power: 1 kW Transducer Beamwidth: 9°-18° Transducer Maximum Depth: 1800 ft saltwater; 2400 ft freshwater RapidReturn™ Sonar Compatible: Yes     Transducer Cable Length: 50 ft Transducer Depth/Speed/Temperature: Depth, temperature Transducer Number of PINs: 8-pin Transducer Supported Deadrise/Transom Angles: 0° supports hull deadrise angles from 0° to 7° Housing Material: Stainless steel Specifications: Cable Length (Feet): 50' Chirp: Medium Imagining: Standard Mounting Style: Thru-Hull Pins: 8 Speed Included: No Temperature: Yes Box Dimensions: 7"H x 8"W x 13"L WT: 11 lbs UPC: 753759338459

Read more less

0 Degree Pole Mount f/Livescope Plus LVS34Position your LiveScope™ Plus LVS34 transducer on this 0-degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too).

Read more less

15M Video Extension Cable - Male to MaleConnect to your GC™ 10 camera for 15 m (49.21 feet) of extra cable length.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Field Installable ConnectorsUse our waterproof male/female field-installable connectors at the foot of the mast for easy connection of the mast cables on our gWindT family of transducers when stepping the mast.Compatible Devices: GND™ 10 Black Box Bridge gWind™ Race Transducer gWind™ Transducer gWind™ Wireless Transducer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Tilt/Swivel Mounting BracketMount your echoMAP™ or GPSMAP® using this bracket. The mount swivels and tilts for optimum viewing.Compatible Devices: echoMAP™ 50dv echoMAP™ 50s GPSMAP® 547 GPSMAP® 547xs WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 5"W x 6"L WT: 0.4 lbs UPC: 753759998356

Read more less

Tilted Element™ Thru-HullMinimize Your DragThe P19 model have been the standard in low-profile models for many years. Their large sensitive ceramics allow deep echosounding up to 206M (700'). These nearly flush units minimize drag as only 5mm (2/10") of the housing extends outside of the hull. The plastic P19 provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for moreaccurate depth readings.Applications Cruising powerboats and sailboats Sailboats Features Depth only or Depth and temperature Fixed 12° tilted versions for 8° to 15° hull deadrise Right angle cable exit offers low headroom and protection when transducer is stepped on Included rubber washer allows tightening of the hull nut to irregular hull surfaces Housings are ABYC H-27 compliant Optional temperature sensor Plastic housing Boat Size: Up to 9M (30') WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Speed Included: No Pins: 8 Mounting Style: Thru-Hull Imagining: Standard Chirp: No Cable Length (Feet): 30' Temperature: Yes Box Dimensions: 4"H x 6"W x 8"L WT: 2.1 lbs UPC: 801769000764 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

171 2.25" Ball System ArmFeatures: Engineering-grade nylon and Stainless steel construction Compatible with all 2.25″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 2.25″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends For 10-12″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately) Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 6"W x 11"L WT: 0.85 lbs UPC: 062017001715

Read more less

170 2.25" Ball Mounting System for 10-12" ScreensComponents:  171 2.25" Ball System Arm 175 2.25" Ball System Top Plate for 10-12" Screens 176 2.25" Ball System Base 171 2.25" Ball System ArmFeatures: Engineering-grade nylon and Stainless steel construction Compatible with all 2.25″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 2.25″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends For 10-12″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately) 175 2.25" Ball System Top Plate for 10-12" ScreensFeatures: Engineering-grade nylon and Stainless steel construction Compatible with all 2.25″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 2.25″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends For 10-12″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately) 176 2.25" Ball System BaseFeatures: Engineering-grade nylon and stainless steel construction Compatible with all 2.25″ Scotty ball system accessories Equipped with the classic Scotty 241 hole pattern, allowing it to be paired with these options: 449 Portable Clamp Mount 320 Adaptable Rail Mount 242 Rail Mount Adapter 340 Track Adapter 441 Backing Plate 341 Glue-On Mount Pad28 Gimbal Mount Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 7"W x 8"L WT: 2.4 lbs

Read more less

176 2.25" Ball System BaseFeatures: Engineering-grade nylon and stainless steel construction Compatible with all 2.25″ Scotty ball system accessories Equipped with the classic Scotty 241 hole pattern, allowing it to be paired with these options: 449 Portable Clamp Mount 320 Adaptable Rail Mount 242 Rail Mount Adapter 340 Track Adapter 441 Backing Plate 341 Glue-On Mount Pad 2028 Gimbal Mount Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 7"W x 8"L WT: 0.7 lbs UPC: 062017001760

Read more less

161 1.5" Ball System ArmsFeatures: Engineering-grade nylon and stainless steel construction Compatible with all 1.5″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 1.5″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends 2-1/4” square fixed base For 7-9″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately) Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 5"W x 10"L WT: 0.4 lbs UPC: 062017001616

Read more less

NSO evo3S 16" MFD Display OnlyUltimate ClarityNSO evo3S delivers the ultimate view with an ultra-bright 16-inch display, ideal for both indoor and outdoor installations. Wide viewing angles keep the screen in view from anywhere in sight, even if you’re wearing polarised sunglasses. See more than ever with Full HD resolution, and the option to combine up to six panels in a split-screen layout.Intuitive ControlA responsive, multi-touch display places control of your on-board electronics at your fingertips. Intuitively navigate charts, define waypoints, and take control of connected systems such as autopilot, radar, and sonar with a touch. A range of optional keypads add classic controls, perfect for fine adjustments or use in rough conditions.Swift ResponseEvery NSO evo3S display features an integrated six-core processor for ultimately smooth response, from charting to StructureScan® 3D imaging. Enjoy swift access to the information you need, as you need it, whether you’re cruising the open ocean or carefully navigating a crowded harbour.Glass Helm StyleNSO evo3S glass helm systems offer the perfect combination of form and function. Create your own custom helm layouts to suit any activity, and switch seamlessly between those layouts in an instant. Low-profile glass helm styling complements any helm design, from ultra-modern to timeless classic.Fully ConnectedBuilt-in wireless connectivity links NSO evo3S to your existing mobile devices for remote viewing and control, and delivers easy online software upgrades via any wireless internet hotspot. Wired Ethernet, NMEA 2000®, and J1939 networking provide almost limitless integration options, from vessel-wide display systems to radar, sonar, engine integration, and much more.Features: Ultra-bright, Full HD 16-inch display Easy touchscreen control of your entire Simrad system Integrated six-core processor for ultimate performance Low-profile glass helm styling See more than ever with six-panel split screen option Connect with smartphones, tablets, and internet hotspots In The Box: Display unit Suncover Bezels Power cable and connector block RJ45 to 5-pin Ethernet adapter cable NMEA 0183 connector block Documentation pack Cable retainer kit Panel mounting kit Connections: NMEA 2000 - NMEA 2000 data J1939 - J1939 engine data USB - mouse, keyboard or mass storage NETWORK 1-3 - Ethernet network SD - microSD card reader HDMI OUT - HDMI video output VIDEO IN - composite video input HDMI IN - HDMI video input NMEA 0183 - NMEA 0183 data POWER - 12 - 24 V DC input, external alarm and power control Specifications: Screen Size: 16" Cartography Brand: Navionics/C-Map/Lowrance/CMOR Transducer Included: No Touchscreen: Yes Box Dimensions: 7"H x 16"W x 21"L WT: 16.1 lbs UPC: 9420064105014 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

NMEA 0183 Interface CableThe NMEA 0183 interface provides a bi-directional gateway between an NMEA 2000® network and NMEA 0183 devices.Ideal for retrofitting NMEA 2000 devices while retaining existing NMEA0183 components, this interface allows boaters a simple way to upgrade to newer technology, sensors, and devices without replacing a whole system.  For existing NMEA 2000® networks and systems, this also allows a user to add NMEA 0183 devices to your network, allowing you to choose the products best suited to your boat and sailing.Simple mounting, connectivity, and a low-profile design allow for easy installation.Features Easy to install Allows older products to connect to new, more modern products Supports NMEA 0183 Version 4.1 Filter NMEA 0183 rx/tx sentences and configure transmit frequency via Navico® Compatible with Lowrance®, Simrad®, and B & G® MFDs and instrument displays NMEA 2000 Compliant Standard Micro-C connector Specifications: Cable Length (Feet): 6' Connection Gender: Male Data Interface: NMEA 0183 Box Dimensions: 3"H x 4"W x 10"L WT: 0.4 lbs UPC: 9420064127658

Read more less

IS35 Digital DisplayThe IS35 is used to display engine and vessel related data on the network provided by NMEA2000 compatible engines and sensors. The types of data available for display are determined by the available NMEA2000 sensors on the network. You can use the IS35 as engine display for most types of marine engines, either via a NMEA2000 gateway, or a J1939 to NMEA2000 convertor. (for example the Livorsi CAN Data Gateway). The IS35 comes with 5 pre-configured pages for the most commonly used information when operating vessels. The information on these pages is automatically displayed from an internal hierarchy of available data. The hierarchy was developed from market and customer surveys about which information the boat owners themselves consider the most important information to see on their displaysFeatures Automatic display of prioritized dynamic data types. (RPM, fuel flow, economy, speed etc Bright, full color 240 x 360 LED screen makes it easier to see menus and screen detail in both full sunlight and night operation Menu button doubles as backlight control Simple menu navigation using menu, arrow and enter buttons Easily swap between pages using arrow keys Page cycle with configurable times Surface mount, or flush/rear mount option Pre configured data pages Motoring Engine Monitoring Fuel Economy Depth History Motor Steer Device will automatically detect available sensors on the network and display the most relevant information on the corresponding pages User Interface The IS35 is running on the NOS (Navico Operating System) platform. Anyone that is familiar with Navico products will quickly and easily understand the user interface of the IS35. Power Control The unit automatically starts up when N2K bus is powered. The IS35 can't be powered off but can be put into standby. Refueling You can quickly set the fuel to full, or add a fuel amount directly from pressing menu on the fuel page, or by the settings menu and going to `Fuel'. Auto scroll The IS35 can be set to automatically scroll through the pages ranging from 1 to 10 seconds.Key Selling Features Easy to install Fits standard gauge hole Display NMEA2000 engine information affordably Automatically displays information relevant to which sensors are installed Easily display fuel management information Glass dash low profile display Rear mount option for flush mount glass dash installs Automatic page scrolling with configurable adjustable delay time Simple user interface Dedicated engine display Display following information on non-NMEA2000 engines by installing sensors: Fuel flow Fuel used Fuel remaining Water pressure Specifications: Display Resolution: 320 x 240 (H x W) Display Type: LED-backlit TFT-LCD Display: Backlighting Color [text]: Day (white) / Night (red) Display Size: 88.9mm / 3.5" Environmental Rating: IPX7 Operating Temperature: -15°C to 55°C (5°F to 131°F) Product Width: 102mm (4.0") Product Depth: 122mm (4.8") Product Height: 99.7mm (3.9") Product Weight: 0.28kg (0.60lb) Power Consumption: 130mA @ 13.5V Specifications: Instrument Function: Multifunction Box Dimensions: 6"H x 7"W x 9"L WT: 1.4 lbs UPC: 9420024155578

Read more less

ForwardScan® Transducer Kit with Sleeve & PlugKnow what lies ahead, with ForwardScan. This forward-looking sonar provides a clear two-dimensional image of the bottom in front of your vessel, allowing you to navigate shallow or poorly-charted waters with confidence. With real-time updates and a forward-looking view of up to eight times your current depth, ForwardScan lets you relax and enjoy a safer day on the water.The ForwardScan transducer is compatible with Simrad NSS evo2 and NSO evo2 MFD systems, and can be easily installed on almost any craft.Features: Easy to use Forward-looking 2D sonar imaging Bottom Color Tracking for a simplified bottom view Heading Line View combines ForwardScan depth data into heading line on charts Shallow depth alarm Maximum forward view of 8X current depth, nominally 4-5X current depthOperates at 180kHz, reducing interference from traditional 200kHz echosounders Built-in temperature sensor 50.8mm (2") stainless steel through-hull fitting Connects directly to Simrad NSS evo2, or NSO evo2 via SonarHub sounder module Specifications: Temperature: Yes Mounting Style: Thru-Hull Box Dimensions: 5"H x 8"W x 12"L WT: 4.8 lbs UPC: 9420024133194 Owner's Manual (pdf)

Read more less

OP12 Autopilot ControllerThe OP12 wired remote seamlessly integrates with Simrad autopilot systems to provide intuitive mode control, course adjustments, and power steering. Designed to complement the low-profile design of Simrad glass bridge instruments and displays, this remote can be combined with the IS42 Colour Instrument Display to create a standalone autopilot controller, or used as a dedicated autopilot keypad for GO, NSS and NSO evo2 multifunction displays.Features: Intuitive operation Easy installation Combine with an IS42 display for full autopilot control Compatible with Simrad AC12, AC42, NAC-2 and NAC-3 autopilot computers Use alongside NSS & NSO evo2 MFD's as an additional Autopilot Controller Low-profile glass helm design Low power consumption Certified NMEA 2000® connectivity Specifications: Dimensions: 60 x 115 x 32mm (2.4" x 4.5" x 1.3") Weight: 0.12kg (0.3lbs) Power Consumption: 1.4 Watts Network Load: 3 LEN Color: Black Environmental Protection, Waterproof: Waterproof rating: IPx7 Environmental Protection, Humidity: Up to 95% RH Compass Safe Distance: 300mm (1.0") Temperature Operating: -15 to +55°C (5°F to +131°F) Temperature Storage: -30 to +70 °C (-22 to +158 °F) Specifications: Type: Parts Box Dimensions: 5"H x 6"W x 9"L WT: 0.8 lbs UPC: 9420024155127 Owner's Manual (pdf)

Read more less

Suncover for HDS-12 LIVE Display Protective Suncover for HDS LIVE 12-inch displays. Specifications: Type: Covers Box Dimensions: 1"H x 9"W x 15"L WT: 0.7 lbs UPC: 9420024174760

Read more less