Base Valve Gasket for 29090 & 29120 Series ToiletsJabsco Base Valve GasketCompatible Models: 29090 Series Toilets 29120 Series Toilets

Read more less

Blow Out Plug - Plastic - Screws Into Water Inlet Completely clear your water lines with boat and RV blow-out plugs. Screw the plug into the city water inlet, open all drains and faucets, attach and activate the air pump until all lines are clear.

Read more less

Mounting Collar for PRO+ Sensor Aluminum Fuel TanksFeatures: Mopeka Tank Mounting Collar for PRO+ Residential and Bulk Tanks Pre-Applied Adhesive Works with Bulk and Residential Sensors Easy On and Off Lid for Sensor Service

Read more less

MF 840 Vented Loop - 1-1/2"Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids. Specifications: Barb Size: 1-1/2" (38.1mm) Height: 5-1/4" (133.35mm) Width: 7-3/4" (196.85mm) Specifications: Type: Vented Loops Box Dimensions: 2"H x 6"W x 8"L WT: 0.45 lbs UPC: 028026148711

Read more less

Mounting Collar for Pro Check Sensor LPG Aluminum TankCollar set used with non-magnetic and magnetic Pro Sensors, on aluminum DOT cylinders or steel tanks. Includes pre-applied adhesive and prep materials. Note: The collar for LPG cylinders differs from the collar for flat-bottom tanks. The LPG collar is angled where it attaches to the tank to match cylinder curvature. Specifications: Type: Parts Box Dimensions: 1"H x 4"W x 5"L WT: 0.05 lbs

Read more less

Nano Touch Raw Water Fitting KitRaw water fitting compatible with Nano Touch SFT macerating toilets.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Fittings & Hoses Box Dimensions: 1"H x 6"W x 8"L WT: 0.1 lbs

Read more less

Pump Service KitService kit for GROCO SPO Series Pumps made after September 2001.What's Included? Rotor, 8-Slot (SP-99-A) Blades (8) (SP-98) O-ring (2-034) Snap ring (SNAP RING-1) Seal assembly (69089)

Read more less

Blow Out Plug - Brass - Quick-Connect StyleCompletely clear your water lines with RV blow-out plugs. Screw the plug into the city water inlet, open all drains and faucets, attach and activate air pump until all lines are clear.

Read more less

2-Way Waste Manifold 12' Cable 1-1/2" Ports2-way manifold with Whale Intelligent Control built in. The waste manifold can be used with a Whale Gulper pump to create a greywater disposal system. The manifold accepts two waste inputs and senses water through the wall. This relays information to the Gulper IC pump to turn on and pump the wastewater.This Whale WM3884B IC manifold has 12 feet of cable and 1-1/2" ports.Specifications: Height: 115mm (4-1/2") Length Cable: 12' Cable Voltage: 12V - 24V DC Width: 139mm Hose Size Outlet: 25mm (1") & Inlet: 38mm (1-1/2") Model: WM3884B Depth: 102mm (4")

Read more less

Temperature & Pressure Relief Valve1/2" NPT pressure/temperature relief valve for 6 and 11-gallon hot water heaters.Features:  Maximum PSI: 100 Threads: 1/2" NPT

Read more less

Macerator Pump Housing KitJabsco Macerator Pump Housing Kit specifically for 18690.

Read more less

LCD Wireless Display for Pro Check, Universal, PRO200, Pro PlusThe Mopeka® LCD Display is the first and only remote LCD designed to seamlessly pair with up to two sensors, including the Pro Check, Universal, Pro200, and Pro Plus models. This compact display is both easy to use and highly portable, featuring a mounting bracket and built-in magnets, ensuring your sensors are always accessible when and where you need them. With a simple, rugged design, the Mopeka LCD Display delivers the precision and accuracy our customers expect.Boasting a battery life of up to 5 years and easily replaceable batteries, the Mopeka LCD Display allows you to control and configure your connected Mopeka sensors. You can switch between various commodities—such as water, oil, propane, diesel—and adjust screen time and brightness to suit your needs. The system also supports sensor configurations for both vertical and horizontal tanks, with preset options for tanks up to 1,000 gallons or an “Arbitrary” mode that lets you input custom tank dimensions, orientation, and volume.With the Mopeka LCD Display, you’ll always stay informed and in control.The display comes with 4 x CR2032 batteries that are pre-installed. To replace the batteries, remove the screws on the back of display and take off the backing cover. Place batteries double stacked, negative side down, on either side of the display. Ensure the batteries are secured in place. Replace the backing cover and screws.NOTE - The tank settings will default to 20 lb vertical propane tanks on start-up. Specifications: Type: Parts Box Dimensions: 2"H x 4"W x 4"L WT: 0.24 lbs

Read more less

Joker/Check Valve KitFor use with 37010, 37045, 37075, 37085, 37245, 37275 Series Marine Toilets, and 37055, and 37255 Series Electric Conversion Kits.Fits inside the discharge elbow and the connection of the pump cylinder.

Read more less

Check Valve for 800/1100 Bilge 1" Straight PortsReplacement Check valves for the "new" Rule-Mate Bilge pumps. Helps prevent backflow of water into the bilge.Specifications:3/4" (19mm)

Read more less

Joker Valve KitFits Models 29090/29120/29200/58040/58060/58080/58260/58240/58280/58500

Read more less

Service Kit f/Quiet Flush 37045/37245 SeriesWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 1"H x 4"W x 5"L WT: 0.05 lbs UPC: 671880520959

Read more less

Nordic Folding Stainless Steel J-Spout TapThis j-spout cold water tap is made of durable, low-maintenance Passivated 304 stainless steel This light-weight cold water tap is perfect for installation on the flybridge, bar, or aft cockpit locations.Specifications: Widest Point of the J-Spout: 6-1/4" Water Connection: 1/2 in. NPS-M Material: Passivated 304 stainless steel, brush finish Mounting Hole: 7/8 in. Shipping Weight: 5 Lbs.

Read more less

MF 845 Vented Loop - 1/2"Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids. Specifications: Barb Size: 1/2" (12.7mm) Height: 5-1/4" (133.35mm) Width: 4-1/4" (107.95mm) Specifications: Type: Vented Loops Box Dimensions: 2"H x 5"W x 5"L WT: 0.2 lbs UPC: 028026148797

Read more less

Multifunction Flush PanelThe Multifunction Flush Panel is a toilet flush control providing momentary flush functions for normal flushing, adding water to a bowl, or emptying water from the bowl. This panel is designed to be used with Raritan's Atlantes Freedom Vortex Vac, Marine Elegance, and SeaEra QC models. This panel may also be used with other electric toilets, whereas the discharge pump and rinse water can be operated independently and do not exceed the following voltage and amperage limits: 12VDC - 20 amps or 24VDC - 15 amps The panel can be mounted in either a vertical or horizontal orientation.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Part Number   9108732762 EnviroComfort ECD6K-HV AC Retrofit Kit - 115V - 6,000 BTU  The Dometic Marine Air 6,000 BTU EnviroComfort Air Conditioning Retrofit Kit provides reverse-cycle cooling and heating capability so you stay comfortable onboard year-round.  This 6,000 BTU unit replaces an older self-contained air conditioner of comparable capacity in the 5,000 to 7,000 BTU range. All units have high-velocity blowers with internal motors for a more compact installation footprint.  The blower can be rotated to a horizontal or vertical position for greater installation flexibility.  Units are built on an easy-to-plumb stainless-steel drain pan, and the pre-installed return-air filter is removable for cleaning. ECD kits are ideal for replacing an existing air conditioning system or for a new air conditioning installation.  The Retrofit Kit includes the ECD self-contained air conditioning unit and digital control with bezel and is intended to replace an older self-contained air conditioner of comparable capacity. Legacy Part Number - 207500306 Features: High-velocity, rotatable blower for horizontal or vertical installation Environmentally friendly R-410A refrigerant Easy to use Dometic Passport I/O digital control and display (P/N 9600005997) Plastic remote electrical box for convenience in mounting Stainless-steel drain pan Pre-installed return-air filter, easily removable and cleanable Small, compact, space-saving design Specifications: Input voltage - 115 V Starting amps - 36 A Fuse Max. / Min. - 20 A/12 A Input frequency 50/60 Hz Refrigerant type - R410A Colling capacity - 6,000 BTU Min. supply duct size - 4" Seawater inlet connection - .625" Dimensions - Height 11.25" x Width 16" x Depth 9"  In the Box: Self-contained AC unit Digital control w/bezel and 15' cable Instruction manual Can only be shipped LTL Truck Freight. Additional Shipping fees will apply. *Sold as an Individual  WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.   Quick Guide Owners Manual Installation Guide

Read more less

Part Number   9108844174 EnviroComfort ECD6KZ-HV AC Retrofit Kit - 6,000 BTU - 230V The Dometic Marine Air 6,000 BTU EnviroComfort Air Conditioning Retrofit Kit provides reverse-cycle cooling and heating capability so you stay comfortable onboard year-round.  This 6,000 BTU unit replaces an older self-contained air conditioner of comparable capacity in the 5,000 to 7,000 BTU range. All units have high-velocity blowers with internal motors for a more compact installation footprint.  The blower can be rotated to a horizontal or vertical position for greater installation flexibility.  Units are built on an easy-to-plumb stainless-steel drain pan, and the pre-installed return-air filter is removable for cleaning. ECD kits are ideal for replacing an existing air conditioning system or for a new air conditioning installation.  The Retrofit Kit includes the ECD self-contained air conditioning unit and digital control with bezel and is intended to replace an older self-contained air conditioner of comparable capacity. Legacy Part Number - 207500307 Features: High-velocity, rotatable blower for horizontal or vertical installation Environmentally friendly R-410A refrigerant Easy to use Dometic Passport I/O digital control and display (P/N 9600005997) Plastic remote electrical box for convenience in mounting Stainless-steel drain pan Pre-installed return-air filter, easily removable and cleanable Small, compact, space-saving design Specifications: Input voltage - 230 V Starting amps - 34 A Fuse Max. / Min. - 20 A/12 A Input frequency 50/60 Hz Refrigerant type - R410A Colling capacity - 6,000 BTU Min. supply duct size - 4" Seawater inlet connection - .625" Dimensions - Height 11.25" x Width 16" x Depth 9"  In the Box: Self-contained AC unit Digital control w/bezel and 15' cable Instruction manual Can only be shipped LTL Truck Freight. Additional Shipping fees will apply. *Sold as an Individual  WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.   Quick Guide Owners Manual Installation Guide

Read more less

EnviroComfort ECD10KZ-HV AC Retrofit Kit - 10,000 BTU - 230V   Part Number 9108850337 The Dometic Marine Air 10,000 BTU EnviroComfort Air Conditioning Retrofit Kit provides reverse-cycle cooling and heating capability so you stay comfortable onboard year-round.  This 10,000 BTU unit replaces an older self-contained air conditioner of comparable capacity in the 8,000 to 11,000 BTU range. All units have high-velocity blowers with internal motors for a more compact installation footprint.  The blower can be rotated to a horizontal or vertical position for greater installation flexibility.  Units are built on an easy-to-plumb stainless-steel drain pan, and the pre-installed return-air filter is removable for cleaning. ECD kits are ideal for replacing an existing air conditioning system or for a new air conditioning installation.  The Retrofit Kit includes the ECD self-contained air conditioning unit and digital control with bezel and is intended to replace an older self-contained air conditioner of comparable capacity. Legacy Part Number - 207500010 Features: High-velocity, rotatable blower for horizontal or vertical installation Environmentally friendly R-410A refrigerant Easy to use Dometic Passport I/O digital control and display (P/N 9600005997) Plastic remote electrical box for convenience in mounting Stainless-steel drain pan Pre-installed return-air filter, easily removable and cleanable Small, compact, space-saving design Specifications: Input voltage - 230 V Starting amps - 34 A Fuse Max. / Min. - 20 A/12 A Input frequency 50/60 Hz Refrigerant type - R410A Colling capacity - 10,000 BTU Min. supply duct size - 6" Seawater inlet connection - .625" Dimensions - Height 13.25" x Width 20" x Depth 9.63" In the Box: Self-contained AC unit Digital control w/bezel and 15' cable Instruction manual Can only be shipped LTL Truck Freight. Additional Shipping fees will apply. *Sold as an Individual WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide Owners Manual Installation Guide

Read more less

EnviroComfort ECD16KZ-HV AC Retrofit Kit - 230 V - 16,000 BTU   Part Number  9108821279 The Dometic Marine Air 16,000 BTU EnviroComfort Air Conditioning Retrofit Kit provides reverse-cycle cooling and heating capability so you stay comfortable onboard year-round. This 16,000 BTU unit replaces an older self-contained air conditioner of comparable capacity in the 12,000 to 16,000 BTU range. All units have high-velocity blowers with internal motors for a more compact installation footprint.  The blower can be rotated to a horizontal or vertical position for greater installation flexibility.  Units are built on an easy-to-plumb stainless-steel drain pan, and the pre-installed return-air filter is removable for cleaning. ECD kits are ideal for replacing an existing air conditioning system or for a new air conditioning installation.  The Retrofit Kit includes the ECD self-contained air conditioning unit and digital control with bezel and is intended to replace an older self-contained air conditioner of comparable capacity. Legacy Part Number - 207500017 Features: High-velocity, rotatable blower for horizontal or vertical installation Environmentally friendly R-410A refrigerant Easy to use Dometic Passport I/O digital control and display (P/N 9600005997) Plastic remote electrical box for convenience in mounting Stainless-steel drain pan Pre-installed return-air filter, easily removable and cleanable Small, compact, space-saving design Specifications: Input voltage - 230 V Starting amps - 34 A Fuse Max./Min. - 20 A/12 A Input frequency 50/60 Hz Refrigerant type - R410A Colling capacity - 16,000 BTU Min. supply duct size - 6" Seawater inlet connection - .625" Dimensions - Height 13.5" x Width 20" x Depth 11.25" In the Box: Self-contained AC unit Digital control with bezel and 15' cable Instruction manual Can only be shipped LTL Truck Freight. Additional Shipping fees will apply. *Sold as an Individual WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.     Quick Guide Owners Manual Installation Guide

Read more less

Pumphead Kit for 4248/4258 Series Pro Blaster II Deluxe 4.0/5.0 Washdown Pumps & 4258 Series High Flow SystemThis Shurflo Pumphead kit is for the 4248/4258 Series Pro Blaster II Deluxe 4.0/5.0 Washdown Pumps and the 4258 Series high flow system listed below: Shurflo Pro Blaster II Deluxe 4.0 (4248-153-A09 [4248-153-E09]) Shurflo Pro Blaster II Deluxe 4.0 24 VDC (4248-163-A09 [4248-163-E09]) Shurflo Pro Blaster II Ultimate 5.0 (4258-153-A09 [4258-153-E09]) Shurflo Pro Blaster II Ultimate 5.0 24 VDC (4258-163-A09 [4258-163-E09]) Shurflo High Flow System (4258-153-A09 [4258-153-E09*]) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Twist n' Lock Pump AssemblyThe intuitive simple to use Twist Lock handle works by locking the redesigned piston assembly into place helping to prevent back flow of any waste water into the bowl. Base valve gasket is included.Compatible Devices: 29090 Series 29120 Series WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Service Kit for 50880 Series PumpsFeatures: Contains - 2 Joker Valves, Diaphragm, and Ports For the 50880 Series Includes Service Instructions Actual Weight: 0.13 kg (Approximately 0.33 kg packed)

Read more less

In-Line Check Valve 1"-1 1/2" Stepped ConnectionAll Whale bilge switches, non-return valves, strainers and pipework fittings are designed and manufacturers with highest quality at heart. Combine these accessories with your whale bilge pump for a robust bilge system tailored to your vessel.LV1215 In-line Check Valve 25mm / 38mm (1"/ 1 1/2") Stepped ConnectionWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

EvoFlex Drinking Water Hose - 35'Camco’s EvoFlex 35-Foot Drinking Water Hose with a 5/8-inch ID is ideal for RV and marine use. Its extra flexible construction holds no memory, making it easier to position and store. Features nickel-plated machined fittings. Drinking water safe with a lead-free, BPA-free, and phthalate-free formulation. The hose leaves no strong plastic taste in your water. UV stabilized for a long life. Made in the USA.Features: Extra Flexible Design: Holds no memory, making it easier to position and store The Perfect Size Hose: 35-foot hose with 5/8-inch diameter Drinking Water Safe: Contains a BPA-free, lead-free, and phthalate-free formulation Provides Great Tasting Water: The hose won't leave a strong plastic taste in your water Durable Construction: Features nickel-plated machined fittings; UV Stabilized: For a long life Made in the USA: The product is proudly made in the USA

Read more less

Piston Rod Assembly with O-RingRaritan's Piston Rod Assembly includes the O-Ring and is made specifically for Raritan's PHII and PHEII.Raritan manufactures equipment for pleasure boats throughout the world. Products include marine toilets, waste treatment systems, icemakers and water heaters. Committed to the environment and preserving sea life, Raritan designs products to help maintain an environmental balance and ensure the quality of marine waters.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 4"W x 7"L WT: 0.47 lbs UPC: 085462000423

Read more less

Crown Head™ CD Series Repair KitThe Deep Draft Crown Head was last made in 1990 but some still exist out in the field today. While many of the parts are similar to today’s Crown Head there are some that are no longer available. For this reason we now include the macerator retro-fit for the old Deep Draft units to make the Centrifugal Discharge series.This repair kit will update the older style Deep Draft toilets to the new CD series. For those not wishing to tear apart units Raritan still offers a Crown Head Exchange program that allows users to swap their old base for a new one at a reduced cost over buying new.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 3"H x 4"W x 6"L WT: 0.4 lbs UPC: 085462007033

Read more less

Valve Kit EPDMThe Jabsco's Valve Kit EPDM is a check valve kit, EPDM for a Jabsco diaphragm pump.

Read more less

EvoFlex Drinking Water Hose - 10'Camco’s Evo Flex 10-Foot Drinking Water Hose with 5/8-inch ID is ideal for RV and marine use. Its extra flexible construction holds no memory, making it easier to position and store. Features nickel-plated machined fittings. Drinking water safe with a lead-free, BPA-free and phthalate-free formulation. The hose leaves no strong plastic taste in your water. UV-stabilized for a long life. Made in the USA.Features: Extra Flexible Design: Holds no memory, making it easier to position and store The Perfect Size Hose: 10-foot hose with 5/8-inch ID Drinking Water Safe: Contains a BPA-free, lead-free and phthalate-free formulation Provides Great Tasting Water: The hose won't leave a strong plastic taste in your water Durable Construction: Features nickel-plated machined fittings; UV-Stabilized: For a long life Made in the USA: Product is proudly made in the USA

Read more less

Regular Toilet Seat with Soft Close LidFeatures: For regular-size bowl toilets from 2018 only (flat edge at the back and Jabsco logo)  Composite plastic seat Lid dimensions - 423mm x 365mm/155mm between fitting holes Hinges included Packaged Dimensions: L:50.00 x H:40.00 x W:40.00cm Actual Weight: 2.88kg  (Approx. 3.38kg packed)

Read more less

Garboard Replacement Plug - Machined BronzeThe replacement plug has a square top for use with a socket wrench. Constructed of machined bronze. Installs with three #10 FH fasteners (not included).Specifications: Weight: .04 oz Replacement plug for 520040 Specifications: Type: Parts Box Dimensions: 6"H x 7"W x 9"L WT: 4 lbs UPC: 035514520720

Read more less

Shaft SealRaritan's Shaft Seal is made specifically for Raritan's PH and PHII.Raritan manufactures equipment for pleasure boats throughout the world. Products include marine toilets, waste treatment systems, icemakers and water heaters. Committed to the environment and preserving sea life, Raritan designs products to help maintain an environmental balance and ensure the quality of marine waters.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 085462000485

Read more less

Heavy-Duty Brass Tap - Chrome PlatedThis basin tap has a heavy-duty chrome-plated brass body.Specifications: Exposes Tap Part Height: 2-1/2" Water Connection: 1/2 in. NPS-M Material: Chrome-plated brass body with chrome-plated ABS plastic knobs Mounting Hole: 7/8 in. Shipping Weight: 3 lbs. *The "P" within the part number indicates retail packaging

Read more less

Recessed Shower with 6' White Hose - Euro Trigger SprayerThis part is part of the fifth generation of Scandvik recessed showers. Also, this recessed shower has an easy-to-use Euro trigger sprayer handle.Features: White handle, white cup & cap with 6’ white nylon hose Improved UV protection and a better water seal when the cap is closed Built-in grab ring for easy deployment Mounts vertically or horizontally Mounting hardware is included Specifications: Water connection: 3/8 in. BSP-F threaded fitting Material: ABS and chrome-plated brass (push-button) Mounting Hole: 2-3/4 in. Shipping Weight: 4 lbs. *The "P" within the part number indicates retail packaging

Read more less

18916-0040 Replacement Pressure Switch - 40 PSICompatible Series: 31595-Series 31600-Series 31620-Series 31630-Series WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Marine Elegance Discharge Pump Assembly - 12VRaritan's Marine Elegance Discharge Pump Assembly is available in 12V.In the Box: M23A             #10 Lockwasher SS (5) 1108A            10-32 SS Nut 161123           Macerator Blade 31-102           Motor Shaft Seal 221110           Discharge Pump Seal Plate 221105           O-Ring 161115            Impeller 221115            Discharge Pump Macerator Housing 31-114             Lock Nut 10-32 W/Nylon(3) 221012            Discharge Motor 12 V or 221024 Discharge Motor 24V 221141W         Discharge Hose 221135W         Joker Valve (2) (Also includes #24) 221145            Discharge Adapter Fitting 221146            Joker Valve Insert 221160            Discharge Hose Clamp (small) 221165            Discharge Hose Clamp (large) VLVE               Vent Valve Assembly FC001             Vent Valve Hose Clamp WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Viton Valve Kit Chamber Sub-AssemblyFKM check valve kit for the Triplex (triangle head)

Read more less

ARG-1 Strainer Service KitARG Series raw water strainer service kit.Compatible with the Groco ARG 500, 750 and 755 series strainers.In the Box: (1) - 2-153 - Sight Glass O-Ring (1) - 2-135 - Cap O-Ring (1) - 2-228 - Cap O-Ring (4) - PFW-2 Set - Sight Glass Bolt Washer (1) - 2-011 - Drain Plug O-ring Before 08/01/01 (1) - 2-111 - Drain Plug O-ring After 08/01/01 *Sold as an Individual Specifications: Type: Service Kits Box Dimensions: 0"H x 4"W x 6"L WT: 0.04 lbs UPC: 742985010413 Owner's Manual (pdf)

Read more less

Smart Toilet Control Circuit BoardSmart Toilet Control (STC) is a controller for flushing toilets to optimize water use without compromising the quality of flush.Control consists of a controller, panel, and 7’ of cable. STC is designed to automatically start a flushing cycle if normal or water-saver buttons are pressed.The water-only button brings inlet water to the bowl when pressed and the empty-only button evacuates the bowl. Both water-only and empty buttons have a time limit of eight seconds.Flush timing of initial fill, discharge, and final fill are fully programmable from the panel. If wired, the panel also shows the holding tank's full status. When holding the tank full the LED is lit, and normal and water saver buttons are disabled. Water only and the empty button continues to function. Control is reverse polarity protected. In the case of reverse polarity motors and solenoids will activate as soon as power is connected. After reverse polarity is corrected (within 10 minutes), the unit will work as normal.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Straight Handle Pull Out Sprayer - White with 6' HoseThis straight-handled sprayer is as reliable as it is functional.Features: White sprayer with 6 ft. white nylon hose Included counter-top holder leaves the sprayer in a ready-for-action position Sprayer handle features a trigger sprayer for on/off control or a flip-up lock for continuous water flow Specifications: Water Connection: 3/8 in. BSP-F fitting Material: Glass reinforced plastic sprayer with nylon or chrome plated brass hose Mounting Hole: 1-1/16 in. Shipping Weight: 4 lbs. *The "P" within the part number indicates retail packaging

Read more less

White Vertical Cup & Cap for Scandvik Part Number 1075This is a white replacement cap and cup for the vertically mounted recessed showers. This part is a kit (one #10030 cap and one #10031 cup).Features: These showers are typically mounted on the side of a center console or any vertical surface You can distinguish the vertically mounted unit by the Scandvik logo on the cap Specifications:Mounting Hole: 2-1/4 in.*The "P" within the part number indicates retail packaging

Read more less

Recessed Shower with 6' White Hose - Push-ButtonThis part is part of the fifth generation of Scandvik recessed showers. Also, this recessed shower has an easy-to-use push-button.Features: White handle, cup, and cap with a 6 ft. white hose Improved UV protection and a better water seal when the cap is closed Built-in grab ring for easy deployment Mounts vertically or horizontally Mounting hardware is included Specifications: Water connection: 3/8 in. BSP-F threaded fitting Material: ABS and chrome-plated brass (push-button) Mounting Hole: 2-3/4 in. Shipping Weight: 4 lbs. *The "P" within the part number indicates retail packaging

Read more less

PUREWATER+All-In-One Water Filtration System 5 Micron Replacement FilterFeatures: Simple filter change by twisting off faucet head simply dropping filter into cartridge without crawling under sink On-demand ultra-clean tasting water from your tank Elegantly styled Simple to install Compact filter housing maximizes under sink storage

Read more less

Raw Water System Eco Kit with Rocker Switch, Wire Harness & Fitting12V Raw Water Flush Kit is specifically designed for EasyFit, Nano, and Compass Eco Toilet models. This kit is essential for vessels that already have a pressurized raw water system onboard, providing an efficient raw water flushing solution without the need for a pump (if a pump is needed, refer to Thetford part number T-PF.P27 for 12V applications and T-PF.P28 for 24V applications). It's a perfect choice for those who wish to conserve fresh water on their boat.Features: Compatible with EasyFit, Nano, and Compass eco toilets Includes wall-mounted flush control switch Included 12' wire harness This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

4-Blade Chopper Kit with Lock Nut for 18590 Series Macerator PumpsThe Jabsco 4-Blade Chopper Kit replaces a worn, broken, or malfunctioning macerator chopper in the 18590 Series. The chopper is designed with 4 heads, each with its own blade to break up large debris before it enters the pump and other fluid lines. Includes a lock nut to secure it in place.

Read more less