Scupper Flapper Repair KitThe flapper scupper repair kit should take care of any flapper replacement job.  The traditional flapper scuppers use molded rubber flappers that curl and deform over time, requiring replacement to prevent leaking.  Our flappers are not rubber, but are molded of a thermoplastic elastomer that is resistant to UV and the elements, so they do not curl like the rubber flappers.Repairs most scuppers with flappers, regardless of manufacturer.Kit Contains: All parts needed to repair 2 scuppers of a given size.  Each kit contains 2 each of: 1-5/8" flappers, 1-7/8" flappers, and all necessary keepers and fasteners.

Read more less

316 Stainless Steel T-Bolt Clamp 3/4" Band - Range 8.25" to 8.69" *10-CountVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4″ (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation. These clamps can be used on any hose connection with peace of mind that they will last you a very long time. These clamps are sold in 2 configurations; part numbers ending in “L” signify that a long T-Bolt is being used and is for our Rubber Hose products. The part number without the “L” is for our Silicone and PVC products. 3-Year Warranty. Quick Guide (pdf)

Read more less

Mfg #  9610007632 Model # 21328521 GT6 6,000 BTU Marine Air Conditioner with Digital Control Display - 115V GT combines proven engineering with value-oriented positioning. Every unit includes an integrated digital display for temperature control and system monitoring. Available in 6,000, 10,000, and 16,000 BTU/h capacities with reverse cycle heating, GT delivers reliable climate performance in a complete package. Designed as a drop-in replacement for older A/C systems, GT features rotatable blower positioning, R454B low GWP refrigerant, and compact dimensions for flexible installation. Multiple voltage configurations (115V/230V, 50/60Hz) provide compatibility across applications. Features: R454B low GWP refrigerant Operates at 50 or 60Hz; lower voltage units will run 100-120 volts 50/60Hz and higher voltage units will run 208-240 volts 50/60Hz Special coating on the evaporator coil helps shed water more quickly, which minimizes corrosion Channels in drain pan guide water directly to multiple drain locations, regardless of boat’s heeling angle Rotate the blower up to 270° to find the perfect ducting angle using a single adjustment screw Critical components are easily accessible for simplified servicing Added VMD display Quiet Operation Multiple cushioned vibration mounts and specially designed mounting clips isolate unit vibration from the mounting surface, minimizing operating noise. Composite molded drain pan construction further reduces sound transmission. Optional compressor sound shield available for ultra-quiet operation. Rapid Drainage Rust-free composite drain pan features three drain locations for rapid condensate removal. Integrated channels guide water directly to drain ports regardless of vessel heeling angle, ensuring reliable drainage in all conditions. Compact Size GT delivers high BTU output in a compact footprint optimized for space-constrained installations. Low-profile design with no blower-motor overhang and integrated drain pan provides flexibility in mounting locations and clearances. Technical Specifications: Capacity (BTU/h) - 6,000 Voltage (VAC) - 115 Cycle (Hz) /Phase (Ph) - 60/1 Full Load Amps (FLA) Cool (A) - 4.4 Full Load Amps (FLA) Heat (A) - 5.8 Full Load Amps (FLA) Blower (A) - 0.8 Locked Rotor Amps (LRA) - 25.5 Max. Circuit Breaker (A) - 15 Min Circuit Ampacity (A) - 10 CO2 Equivalent - 0.11 Refrigerant Type - R454B Max Height (in/cm) - 11.4/29.0 Max Width - 17.8/45.2 Max Depth - 10.7/27.2 Min. Duct Size Dia. (in/cm) - 4/10.16 Min. Supply Air Grille (sq in/cm) - 32/206 Min Return Air Grille (sq in/cm) - 64/413 Net Weight (lbs/ kg) - 38.0/17.2 Gross Weight (lbs/ kg) - 44.0/20.0

Read more less

1200W Heating Element for B3 & Sigmar Heaters - 110VFeatures: Made of Incoloy 11" Long 1-5/8" Diameter British threads 7-3/4" Long standard electrical anode rod Specifications: Type: Parts Box Dimensions: 2"H x 2"W x 12"L WT: 0.9 lbs UPC: 8057090079593

Read more less

Floor Flange Seal & Hardware KitThis is a replacement part designed for Dometic™ VacuFlush toilets. This durable gasket ensures a secure seal between the toilet base and the floor, preventing leaks and maintaining proper system functionality. Easy to install, it’s an essential component for keeping your RV or marine sanitation system in top condition.Complete Floor Flange Seal and Hardware Kit for Dometic™/Sealand VacuFlush and Traveler marine toilets. Everything needed for a full flange service in one convenient kit.The floor flange seal sits at the critical junction between your toilet’s base and the floor flange or funnel, maintaining the air-tight barrier. Over time, heat cycling, hull movement, vibration, and the natural aging of the sponge material cause the seal to compress and lose its effectiveness.Kit Includes: 1x Sponge-seal gasket (600341549) 4x Brass T-bolts 4x Stainless steel washers 4x Stainless steel nuts Compatible with the following Dometic™/Sealand VacuFlush & Traveler Toilet Models:106, 111, 506+, 509+, 510+, 511+, 606, 706, 709, 711, 806, 906, 908, 910, 911, 980, 1006, 1048, 1106, 1606, 1609, 2010, 2011, 5006, 5009, and 5706

Read more less

EnviroComfort Dual Duct Kit for 10 & 16,000 EDC Retrofit KitThis additional kit for the Dometic™ marine climate systems can be used to cool or heat two cabins simultaneously. The flexible design adapts easily to the individual installation situation.Dual CoolThe Dometic™ Air Distribution Kit is a neat solution for ensuring comfortable temperatures in two cabins. It conveniently allows two cabins to be cooled or warmed simultaneously. The kit, which includes an air duct, closable supply air grille, and y-piece, is designed flexibly to ensure easy fitting regardless of existing mounting conditions. Legacy #226600092Features: A single unit can cool or warm two cabins simultaneously Flexible to ensure easy fitting regardless of existing mounting conditions WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Hold Down Bracket Kit for 964 Portable ToiletsStainless Steel hold down Brackets for 964 series portable toilets.In the Box:  Hold Down Brackets Mounting Hardware Legacy # 385310018 *Sold as an IndividualWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 5"W x 6"L WT: 0.21 lbs UPC: 087735102537

Read more less

Seat Lid & Seat for 960 Series Portable Toilet - PlatinumReplacement seat and lid for 960 Series toilets.Features:Color - Platinum*Sold as an IndividualWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Parts Box Dimensions: 1"H x 15"W x 15"L WT: 1 lbs UPC: 713814067649

Read more less

Toilet Vacuum Breaker Kit - 385316906The Vacuum Breaker is a anti-siphon check valve, ensuring no back flow of dirty water into your water lines. Replaces Vacuum Breaker On SeaLand, Traveler, VacuFlush.  For Use On Toilets Without Hand Sprayer Option.*Sold as an IndividualLegacy # 385316906WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Fittings & Hoses Box Dimensions: 2"H x 6"W x 6"L WT: 0.15 lbs UPC: 087735102407

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (7/8" – 1-1/4") Clamping Range - 10-Pack - SAE Size 12Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 12 Hose Inner Diameter: (inch) 5/8" – 1-1/8" Clamping Range: (inch) 7/8" – 1-1/4" / (mm) 22-32 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - (3/4" – 1-1/8") Clamping Range - 10-Pack - SAE Size 10Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 10 Hose Inner Diameter: (inch) 1/2" – 5/8" Clamping Range: (inch) 3/4" – 1 1/8"  / (mm) 19-28 Recommended Torque Inch lbs: 25-35 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (1-1/2" - 2") Clamping Range - 10-Pack - SAE Size 24Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 24 Hose Inner Diameter: (inch) 1-5/16" - 1-3/8" Clamping Range: (inch) 1-1/2" - 2" / (mm) 38-50 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 8.62"-9.19"  RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Inner Diameter (inch): 8" Hose Outer Diameter (inch): 8.62" to 9.19" Quick Guide (pdf)

Read more less

Through Deck Kit for Manual Bilge PumpsFeatures:Actual Weight: 0.16 Kg  (Approx. 0.36 Kg packed)

Read more less

Thru-Hull Connector - 3/4" - 90° - White90 Degree Thru-Hull Connector - When looks are important, these are the 90 degree fittings to use. The outside nut is secured to the threaded shaft with a deck plate key. There no threaded section protruding through the head or in need of sawing so its always a neat, finished installation. Features: Outside nut is secured to the threaded shaft with a deck plate key No threaded section protruding through the head or need for saws Makes for a neat, finished installation Built with Johnson Pump quality

Read more less

Motor Shaft Seal ReplacementRaritan's Motor Shaft Seal is a replacement toilet part.Raritan manufactures equipment for pleasure boats throughout the world. Products include marine toilets, waste treatment systems, icemakers and water heaters. Committed to the environment and preserving sea life, Raritan designs products to help maintain an environmental balance and ensure the quality of marine waters.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 3"W x 4"L WT: 0.05 lbs UPC: 085462001727

Read more less

Inlet ValveRaritan's Inlet Valve includes O-Rings and is made specifically for Raritan's PHII and PHEII.Raritan manufactures equipment for pleasure boats throughout the world. Products include marine toilets, waste treatment systems, icemakers and water heaters. Committed to the environment and preserving sea life, Raritan designs products to help maintain an environmental balance and ensure the quality of marine waters.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 3"W x 4"L WT: 0.1 lbs UPC: 085462000317

Read more less

Service Kit for S500 & S800 Bilge PumpsSpecifications: Outlet Diameter: 3/4" (19mm) & 1" (25mm) Compatible with Tsunami Bilge Mk2 Kit Includes (1 each): 90-degree outlet Straight outlet Washer Non-return/check valve WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Black Cap & Container for Scandvik Recessed ShowerThis part is a replacement cup and cap for horizontally mounted recessed showers.Features: These caps have a shower symbol on top Black cap and cup Specifications:Mounting Hole: 2-1/4 in.*The "P" within the part number indicates retail packaging

Read more less

4 Gallon Salt Feed Tank with 12V PumpThe Four Gallon Salt Feed System with Pump is designed for boats that operate in fresh or brackish water and can only be used with the Lectra/San® MC™ or electro-scan™ Type I MSDs. The unit’s Control Panel monitors salinity and salt solution will automatically be added to the MSD when needed. Pressurized freshwater is required—a minimum of 15 psi (103 kPa) working pressure.The simple and basic operation of the system is as follows: the system needs salt water to operate properly and salt can be added when not in full seawater conditions. When the system is activated the electrical charge applied to the patented plates generates the disinfectant to kill viruses and bacteria. As that disinfectant is generated the high-speed macerator breaks apart the waste allowing greater contact between waste and disinfectant.  If your toilet uses freshwater we recommend considering the Purasan. Specifications: Type: Holding Tanks Box Dimensions: 11"H x 11"W x 18"L WT: 6.3 lbs UPC: 085462044687

Read more less

Service Kit F6B-9Impeller is the same as size as 09-812B 12 Blade , width: 1.9" (49.2mm) Diameter: 2-1/4" (57.1mm)

Read more less

Heating Element w/Gasket - Bolt-On Type - 120vThe WH1A-S is a screw in heating element that is 1250w at 120a designed to quickly and efficiently heat the water via electricity in a Raritan water heater.These elements must be installed, and the tank filled prior to applying any power or they will burn out. Raritan does offer an element that can last a bit longer if power is applied without water in the tank.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 4"H x 7"W x 8"L WT: 0.6 lbs UPC: 085462011252

Read more less

Replacement White Cup & Cap for Recessed ShowerThis recessed cap and cup design is made with Dupont™ Zytel® Nylon Resin for greater strength and UV exposure resistance. A rubber gasket under the cap will keep water out when the cap is closed. Features: Requires a 2-3/4 in. mounting hole.    Single white cap and cup NOTE: If you currently have a Scandvik recessed shower with a rubber cap, this latest design version will NOT fit your hole size. You will need to enlarge your current 2 1/4-in. hole to a larger 2 3/4-in.*The "P" within the part number indicates retail packaging

Read more less

Brass Snap Handle Drain Plug - 1" Snap-handle drain plugs feature cam action for easy installation and a leak proof seal. Simply turn the handle clockwise to tighten the plug then snap down the handle to lock. Durable stamped brass and nitrile rubber construction. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

In-Line Check Valve - 1/2" BarbsThis check valve allows water to flow in only one direction helping to safeguard against back surge pressure up to 100 PSI.Features: Allows flow in one direction only Safeguards against backsurge up to 100 PSI Small size, easy installation This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Service Kit f/Electric Toilet 37010 SeriesIncludes: Joker Valve O-Ring Washer, Fiber Gasket Flexible Impeller Seal & Retainer WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 2"H x 7"W x 7"L WT: 0.4 lbs UPC: 671880032827

Read more less

Thermostatic Mixing Valve Kit for Nautic Boiler B3A thermostatic mixing valve is a valve that blends hot water with cold water to ensure constant, safe shower and bath outlet temperatures, preventing scalding. The Quick thermostatic mixing valve is suited perfectly for the Quick and Sigmar brands of water heaters. This kit is sold complete with the valve, hose, and fittings.For use with Quick Nautic Boiler B3.

Read more less

Marine Elegance Discharge Pump Assembly - 24VRaritan's Marine Elegance Discharge Pump Assembly, 24V.In the Box: M23A             #10 Lockwasher SS (5) 1108A            10-32 SS Nut 161123           Macerator Blade 31-102           Motor Shaft Seal 221110           Discharge Pump Seal Plate 221105           O-Ring 161115            Impeller 221115            Discharge Pump Macerator Housing 31-114             Lock Nut 10-32 W/Nylon(3) 221012            Discharge Motor 12 V or 221024 Discharge Motor 24V 221141W         Discharge Hose 221135W         Joker Valve (2) (Also includes #24) 221145            Discharge Adapter Fitting 221146            Joker Valve Insert 221160            Discharge Hose Clamp (small) 221165            Discharge Hose Clamp (large) VLVE               Vent Valve Assembly FC001             Vent Valve Hose Clamp WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Discharge Pump Repair Kit for Marine Elegance & Atlantes Freedom Vortex Vac ToiletsKit Includes: 1 Motor Shaft Seal 31-102P 1 O-ring 221105 1 ME: Joker Valve 221135 1 ME: Joker Valve Insert 221146 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 085462025242

Read more less

Flapper Valve AssemblyRaritan's Flapper Valve Assembly is made specifically for Raritan's PHII and PHEII.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 4"W x 6"L WT: 0.25 lbs UPC: 085462000652

Read more less

Crown Head™ Pump Assembly - Post January 1988Raritan's Pump Assembly is made specifically for Raritan's Crown Head™ post January 1988.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 3"H x 3"W x 5"L WT: 0.7 lbs UPC: 085462005824

Read more less

Minimalistic Compact Single Level Mixer - Deck Mount - 3/8" & 1/2" FittingsThis part is a minimalistic compact mixer with an above-counter hose connection. Supplied with fittings for 3/8 in. BSP-M or 1/2 in. NPS-M hose attachment.Features: Ideal when used in combination with one of the shower rail systems.  Will not require a bulkhead elbow to route plumbing behind the bulkhead Specifications: Water Connection: Flexible supply lines with 1/2 in. NPS-F fittings Material: Chrome-plated brass Mounting Hole: 1-1/4"= in. Height: 3-3/4 in. Shipping Weight: 4 lbs.

Read more less

U-Lube Cartridge - 3oz. *2-PackU-lube is a long lasting waterproof grease specially formulated to lubricate and protect internal ball valve components, and to discourage nuisance marine growth.  U-lube's tacky texture keeps it where it is applied, and helps provide maximum protection against wear, rust, and water washout in non-ball valve applications such as bushings and bearings exposed to wet conditions and a wide range of temperatures.For ball valve applications a zerk fitting replaces the drain plug, enabling U-lube to be injected into the cavity between the valve body and the ball while the valve is in the OPEN position. The approximate volume of grease required to fill GROCO ball valves and the grease volume for other valve brands will be similar.Features: Size: 3 oz. 2-Pack

Read more less

TastePURE Drinking Water Freshener - 16oz BottleCamco TastePURE Drinking Water Freshener helps to eliminate algae and slime from your drinking water tank. Just 1 ounce for every 20 gallons of water helps remove bad smells and tastes. Features: Prevents algae and slime buildup from RV drinking water tanks Just 1 oz. helps remove bad smells and taste from 20 gallons of water Keeps stored fresh water tasting and odor free 16 oz. bottle Easy to use

Read more less

Service Kit f/18590 Macerator PumpsFor older pumps with brass studs, washers and acorn nuts**Stainless Steel Bolt Kit - (17288-1000) sku-56848 - must be purchased**WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 3"H x 5"W x 5"L WT: 0.5 lbs UPC: 671880015349 Brochure (pdf)

Read more less

Pumphead Kit for 4148 Series Aqua King™ II Premium 4.0 PumpsThis Shurflo pump head replacement is for 4148 Series Aqua King™ II Premium 4.0 pumps listed below: Aqua King™ II Premium 4.0 (4148-153-A75 [4148-153-E75]) Aqua King™ II Premium 4.0 24 VDC (4148-163-A75 [4148-163-E75]) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

KlickTite 2 x 90 - 3/4" HoseAllows draining of the system quickly and effortlessly. 

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 1.28"-1.59" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Inner Diameter (inch): 1" Hose Outer Diameter (inch): 1.28" to 1.59" Quick Guide (pdf)

Read more less

Cartridge Motor - 500GPH - 24VUpgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. Heavy-duty motor with stainless steel shaft for 500 GPH pumps, 24V. Featrues: 24V, 500GPH replacement/spare motor cartridge for Johnson bilge pumps Upgrade the output of the bilge pump in a few minutes by simply replacing the cartridge Cleaning debris from the impeller has never been simpler or easier

Read more less

Bilge Enclosed Pump Float SwitchEnsure your boat's safety and efficiency with the T-H Marine Bilge Pump Float Switch, designed for automatic activation of your bilge pump. Built for durability in harsh conditions, this reliable float switch integrates easily into your existing system. Specifications: Type: Switches Box Dimensions: 3"H x 3"W x 6"L WT: 0.4 lbs

Read more less

Drain Plug with O-Ring for ARG Strainers 2008 & OlderDrain Plug before 080101 for ARG Strainers 2008 & Older

Read more less

MF 847 Vented Loop - 1-1/8"Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids. Specifications: Barb Size: 1-1/8" (28.57mm) Height: 7" (177.8mm) Width: 9" (228.6mm) Specifications: Type: Vented Loops Box Dimensions: 2"H x 6"W x 8"L WT: 0.5 lbs UPC: 028028192231

Read more less

MF 839 Vented Loop - 1-1/4"Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids. Specifications: Barb Size: 1-1/4" (28.57mm) Height: 7" (177.8mm) Width: 9" (228.6mm) Specifications: Type: Vented Loops Box Dimensions: 2"H x 7"W x 9"L WT: 1 lbs UPC: 028026190703

Read more less

Pressure Reducing City Water Entry - In-Line - CreamThis combination pressure reducing city water entry and check valve diaphragm design prevents high-pressure damage often caused by city water systems. This high performance water entry limits water pressure safely to 50 PSI while meeting or surpassing all check valve code requirements. This in-line pressure reducing water entry includes a check valve. 3/4" GSH Female swivel inlet. 1/2" NPSM - Male Outlet.Features: Small size, easy installation Continuous protection from high pressure surges Hose mounting eliminates need for permanent installation Fits standard 3/4" hose fittings Built-in check valve 50 PSI This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Heating Element with GasketThe WH1A-S is a screw in heating element that is 1250w at 120v designed to quickly and efficiently heat the water via electricity in a Raritan water heater. These elements must be installed, and the tank filled prior to applying any power or they will burn out. Raritan does offer an element that can last a bit longer if power is applied without water in the tank.Features: Includes Gasket Screw-In Type 120v WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 7"W x 8"L WT: 0.5 lbs UPC: 085462011269

Read more less

Fresh Water Filter Strainer Cover with O-Ring AssemblyFeatures: Strainer Cover For filters used with freshwater pumps

Read more less

Premium Drinking Water HosesHeavy Duty reinforced 5/8" ID drinking water hoses are 20% thicker than our standard hoses. Rated for 300 PSI and NSF listed. BPA free. Anti-kink design features machined fittings and strain-relief ends for added durability. Drinking water safe.

Read more less

Service Kit for Quiet Flush E2 ToiletsContains base cover screw (key 9a), waste pump housing o-rings (keys 13, 14a), joker valve (key 15), motor adaptor o-ring (key 19), washer seals (key 22), shaft seal (key 25), slinger (key 26).For the 38045 & 38245 Series Quiet Flush E2 toilets.

Read more less