1" NPT x 1" ID Bronze Pipe to Hose Straight FittingFeatures: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems Specifications: Construction: Bronze Box Dimensions: 2"H x 2"W x 3"L WT: 0.28 lbs UPC: 742985004931

Read more less

1-1/4" NPT x 1-1/2" ID Bronze Full Flow 90° Elbow Pipe to Hose FittingFeatures: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" Full Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems Specifications: Construction: Bronze Box Dimensions: 2"H x 4"W x 5"L WT: 1.1 lbs UPC: 742985002210

Read more less

1/2" NPT x 3/4" Bronze Full Flow Pipe to Hose Straight FittingFeatures: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems Specifications: Construction: Bronze Box Dimensions: 1"H x 1"W x 2"L WT: 0.2 lbs UPC: 742985003613

Read more less

Macerator Pump - 12v w/Barb AdapterMacerator pumps are the key to a number of important chores on a boat! The most important is to work when it is needed. While macerator pumps are generally used to empty holding tanks they can also be used to empty fish boxes. Raritan had two goals in mind when it set out to design a better macerator. The first is the run dry time because as most owners know when you flip the switch to begin emptying the tank you don’t always remember to turn it back off and the number one enemy of any macerator pump is running without liquid going thru it. Nothing destroys a pump faster than running dry.Raritan developed a plastic housing and impeller combination that resists burnout longer than any macerator on the market today. To try and prevent these things from ruining a trip Raritan also designed the Smart Macerator Control which has several key design features. Probably the most relevant is the ability to shut the pump off as soon as it senses it is running dry. An all to common problem with macerators is the fact they sit for extended periods of time so the macerator control is also designed to “jog” the impeller once a week when power is on. This “jog” prevents the impeller from taking a shape and helps to ensure the pump will empty the tank when requested.Features: All stainless steel bolts to avoid corrosion problems Spring loaded Viton shaft seal is used to prevent premature leaks Proprietary rubber impeller compound allows longer dry running time Specifications: Pump: Self priming Flexible rubber impeller with stainless steel wearplate Impeller: Raritan Proprietary Nitrile compound Blade: Stainless steel double cut Seal: Viton Lip with 316 SS spring and case Motor: Permanent magnet type, fully enclosed, stainless steel shaft, thermal protection for overload, Powder coated housing with sealed ball bearing Ports: Inlet: 1-1/2" hose barb & 1-1/2" NPT Male Outlet: 3/4" MNPT Lead wires: 14 GA, Red and black Weight: 5 lbs. Approvals: Ignition protected, ISO 8846 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Type: Waste Pumps Box Dimensions: 7"H x 7"W x 11"L WT: 5.8 lbs UPC: 085462035746 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

AQUA KING™ II Standard Fresh Water Pump - 24 VDC, 3.0 GPMShurflo's 4138 fresh water pump design was created with a unique over-molded single-piece diaphragm and internal by-pass, ensuring long life and top performance in all plumbing systems. The 4138 pump is constructed for smooth flow and no rapid cycling. The 4138 fresh water automatic demand pump is quiet, thermally protected, and can run dry without damage.Features: 3901 replacement Sealed switch Sealed motor Corrosion-resistant electro-coated motor 4 independent chambers Built-in check valve Co-molded diaphragm Adjustable switch Self-priming up to 6 Feet Dry run capability Thermally protected Ignition-protected, CE Specifications: Voltage: 24 VDC Flow Rate: 3.0 GPM (11.35 LPM) Amps: 3.8 Shut-Off Pressure: 55 PSI (3.8 BAR) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gallons Per Minute: 3 GPM Max PSI: 55 Volts: 24v Box Dimensions: 5"H x 6"W x 11"L WT: 5 lbs UPC: 752324012398 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Perko 1-1/2" Thru-Hull Fitting for Hose Plastic Molded White Plastic Broad FlangeTechnical Information: Hose Size Inches: 1-1/2 Mounting Hole Diameter Inches: 1-7/8 Maximum Hull Thickness Inches: 1-7/8 O.D. Flange Inches: 3 MADE IN THE USA Specifications: Hose Size: 1-1/2" Material: Plastic Box Dimensions: 2"H x 2"W x 6"L WT: 0.3 lbs UPC: 085226768705

Read more less

Compass Eco Toilet - High, White - 12VThe narrow footprint and smart back of the Compass toilet give maximum space and maximum flexibility wherever it is installed on board. It can go straight to a wall or even further towards the hull thanks to the cutaway. The Compass is not limited by a vertical back. This way, the visual installation remains perfect with whatever installation space you have. The small footprint and the hose design facilitate a very easy installation. The discharge pipes can easily be connected either below the step or surface-mounted in all directions. By having both a high and a short profile, the Compass range offers maximum flexibility on board.The performance of the macerator pump meets all quality standards, while the technology inside the toilet has been further developed to keep the sound emission to the lowest level possible, while limiting the water and electrical consumption to minimal levels. The installation, plumbing, and wiring are easy and fast, with virtually no maintenance.Both the Compass High and Short versions are equipped with an innovative soft closing system. A gentle finger touch to the lid activates the soft-close damper mechanism, which controls the closing speed of the cover. In addition to user convenience, a slow-closing lid keeps noise to a minimum and prevents potential damage to the toilet seat.The soft-close damper mechanism is a design original to Tecma.Features: Italian ceramic Wide range of control panels (sold separately) Silent flush Low consumption Technical Specifications: Weight - 47.4 lbs Water Usage - 0.5-2L/0.1-0.5 gal per flush Color - White Seat and Cover - Thermosetting with soft closing Outlet Pump - MAC 4 12/24V Inlet Device - Solenoid This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: White Inlet Size: 1/2" Operation Method: Electric Outlet Size: 1/4" Rinse Water: Fresh Size: Compact Size Suction Lift (ft.): 13' Type: Toilet Volts: 12v Box Dimensions: 19"H x 25"W x 25"L WT: 53.1 lbs UPC: 028985983057

Read more less

Pressure Reducing City Water Entry - Wall Mount - Gel WhiteThis combination pressure reducing city water entry and check valve diaphragm design prevents high-pressure damage often caused by city water systems. This high performance water entry limits water pressure safely to 50 PSI while meeting or surpassing all check valve code requirements. This in-line pressure reducing water entry includes a check valve. 3/4" GSH Female swivel inlet. 1/2" NPSM - Male Outlet.Features: Quick, Permanent Wall Mount Continuous protection from high pressure surges Fits standard hose fittings Built-in check valve 65 PSI This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Polished Stainless Steel Oval Sink - 13.25" x 10.5"This oval basin is 10 x 13 in. and is mirror-finished with a large (1 in.) flange.Specifications: Material: 18/8 stainless steel Flange Profile: A Flange Width: 1 in. Depth: 5 in. Drain Opening: 1-11/16 in. Shipping Weight: 5 lbs.

Read more less

Mixing Bridge with Acrylic Knobs - 3/8"The mixing bridge has an attachment for a shower hose. The hose attachment threads swivel to any angle to make horizontal or vertical mounting easy. The brass bodies are quality chrome-plated with durable ABS knobs.Features: Mounts vertically or horizontally Mixer with clear acrylic knobs Specifications: Water Connection: 3/8 in. BSP threaded shafts with 1/2 in. (NPS-M nylon adapters included) Shower Hose Connection: 3/8" Material: Chrome-plated brass body with acrylic knobs Mounting Holes: (2) 5/8 in. Shipping Weight: 4 lbs. *The "P" within the part number indicates retail packaging

Read more less

Brushed Stainless Steel Oval Sink - 13.25" x 10.5"This oval basin is 10 x 13 in. and is brushed-finished with a large (1 in.) flange.Specifications: Material: 18/8 stainless steel  Flange Profile: A Flange Width: 1 in. Depth: 5 in. Drain Opening: 1-11/16 in. Shipping Weight: 5 lbs.

Read more less

Black & Stainless Steel Recessed Transom Shower Handle/Hose - Vertical/Horizontal Mount - 6' HoseThis recessed shower cap with composite cup mounts vertically or horizontally. Ideal as a deck or transom shower.Features: Push-Button sprayer ABS handle with an attached lanyard for easy pull-out Mounting hardware is included Black with 6 ft. black nylon hose Specifications: Water Connection: 3/8 in. BSP-F threaded fitting on the hose  Mounting Hole: 2-3/4 in. diameter Shipping Weight: 4 lbs. *The "P" within the part number indicates retail packaging

Read more less

Impeller Removal Tool1-9/16" to 2-9/16" (40mm - 65mm)Features: Simple to use Fits ALL makes of impeller Avoids damage to pump All Stainless Steel WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)

Read more less

Solenoid/Anti-Syphon Valve - 24VSolenoid valve for use with Quiet Flush fresh water toilets. Inline, normally closed solenoid valve.Features: Supplied with 1/2" (15mm) JG Speed fit connections, 1/2" (15mm) hose barb inlet, 3/4" (19mm) Hose barb outlet Double-check valve to protect against contamination of potable water Internal inlet filter Mountable in any orientation, above or below the toilet. Mounting bracket included Compatible with the Jabsco toilet series 37045, 37055, 37075, 58XX0 Specifications:Voltage: 24V DC

Read more less

25' Blue Coiled Hose with Adjustable NozzleFeatures: 25' Blue Coiled Hose with Nozzle Male fitting: 3/4" Female Fitting: 3/4" Material: Polyrethane Hose Specifications: Type: Tools & Accessories Box Dimensions: 4"H x 12"W x 14"L WT: 1.9 lbs UPC: 725060044138

Read more less

Pump Cover - Shower SumpClear Cover for Shower Sump Pump Specifications: Type: Misc Box Dimensions: 1"H x 8"W x 8"L WT: 0.4 lbs UPC: 729321031042

Read more less

Impeller Removal Tool2-9/16" to 4-5/8" (65mm - 118mm)Features: Simple to use Fits ALL makes of impeller Avoids damage to pump All Stainless Steel WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)

Read more less

Run-Dry Macerator Waste PumpWASTE EVACUATIONThe Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operationIt is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage.FISH BOX AND LIVEWELL TANK EVACUATIONThe Jabsco Macerator Pump is the ideal pump for the emptying of Fish box and livewell receptacles. Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank. If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties.Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline. Again the Jabsco Macerator pump has the characteristics that lend themselves to this application. The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed buy the Jabsco Macerator Pump, and the self priming capabilities are perfect for fish box installations common to many of today's sports fishing boats. Triple sealed motor to prevent both internal and external motor corrosion New Four-bladed chopper reduces clogging Detects the absence of fluid then shuts-off pump before impeller is damaged Sensor provides adequate run-dry period to allow initial priming of the pump Interrupting power supply to the macerator resets the Run-Dry Device Flow rate to 12 gpm Self-priming to 4ft Fitting:Inlet Port: 1-1/2" Hose Barb plus 1-1/2 NPTDischarge Port: 1" Hose BarbWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 12 GPM Inlet Size: 1-1/2" Suction Lift (ft.): 4' Volts: 24v Type: Waste Pumps Box Dimensions: 4"H x 5"W x 13"L WT: 5.25 lbs UPC: 671880564380 Owner's Manual (pdf)

Read more less

3700 GPH General Purpose End Suction Centrifugal Pump - 24VThe Rule General Pupose Pump is designed 1-1/2" (38mm) inlet and 1-1/2" (38mm) discharge outlet. The Rule General Purpose Pump must be mounted below the waterline. It does not deliver high pressure, nor is it self priming. It delivers lots of water but at low pressure. 24 volts DC. Features: 3700-GPH 24-Volt White/Red 3-Year Warranty WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Impeller KitMaterial:NitrileDrive Type:Single Flat DriveNumber of Blades:6Dimensions: Diameter:2" Shaft Width:5/16" Shaft Diameter:7/8" Insert Material:PlasticJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is =possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

1-1/4"" NPT x 1-1/4" ID Stainless Steel Pipe to Hose Straight Fitting Features: Male NPT x Hose connection #316 Stainless Steel Sizes from 1/2" to 3" Standard Flow NSF-61 compliant Suitable for use in potable water systems Specifications: Construction: Stainless Steel Box Dimensions: 3"H x 3"W x 5"L WT: 0.6 lbs UPC: 742985143388

Read more less

2-Way Waste Manifold - 12' Cable - 3/4" PortsThis manifold manages waste from multiple drains with intelligent control built in. A compact automatic system handles waste drainage from the two outlets. Must be used with Gulper® IC.The two-way manifold IC is connected to a Gulper® IC. When the manifold senses water, it sends an electrical signal to the Gulper® IC, which evacuates the system. As the water level decreases, the electrical signal transmitted by the manifold will cease, and the Gulper® IC will continue to operate for a further 15 seconds before turning off. IC – Intelligent Control TechnologyAt the heart of every Whale IC product lies innovative electronic control circuitry built in. This enables the IC sensor accessories to communicate directly with the IC pumps to control the performance. These accessories send signals to built-in intelligent software, which then controls the pumps to react as required.Specifications: Cable Length: 4m (12ft) Inlet Hose Connections: 3/4" (19mm) Outlet Hose Connections: 3/4" (19mm) Control Voltage: 5V dc via Gulper® IC Current Draw: Low power 0.01 Amps supply Connectors: Deutsch® Connectors: Quick Connect Series 7 ways (directly onto Gulper® IC) Specifications: Inlet Size: 3/4" Operation Method: Electric Outlet Size: 3/4" Box Dimensions: 6"H x 6"W x 6"L WT: 1.4 lbs UPC: 766478944931

Read more less

MK5 Handle AssemblyStainless steel handle assembly with lanyard for MK5 pumpsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Self-priming plunger valve Special polyvinyl grey body and shaft Removable foot valve for cleaning Self-priming Solvent welded construction Will withstand temperature to 120 degrees F (49 degrees C) Length: 36" Diameter: 1-3/4" Strokes/Gal: 4 Capacity: 13GPM Hose Length: 72" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 780 GPH Gallons Per Minute: 13 GPM Type: Manual Box Dimensions: 2"H x 6"W x 37"L WT: 2 lbs UPC: 021083000145

Read more less

1/2" NPT 90° Bronze Fuel ValveFeatures: Compact design 90° flow path 1/2" NPT male and female ports Use FV-590 (Brass) for fiberglass tanks Use FV-590-S (316SS) with aluminum or stainless steel tanks Specifications: Construction: Bronze Box Dimensions: 2"H x 3"W x 3"L WT: 0.54 lbs UPC: 742985144293

Read more less

ARG-2 Strainer Service KitARG Series raw water strainer service kit. Compatible with the Groco ARG 1000, 1210 and 1250 series strainers.In the Box: (1) - 2-157 - Sight Glass O-Ring (1) - 2-232 - Cap O-Ring (1) - 2-229 - Cap O-Ring (4) - PFW-2 Set - Sight Glass Bolt Washer (1) - 2-011 - Drain Plug O-ring Before 08/01/01 (1) - 2-111 - Drain Plug O-ring After 08/01/01 *Sold as an Individual Specifications: Type: Service Kits Box Dimensions: 1"H x 7"W x 7"L WT: 0.05 lbs UPC: 742985010505 Owner's Manual (pdf)

Read more less

ARG-3 Strainer Service KitARG Series raw water strainer service kit. Compatible with the Groco ARG 1500, 2015, 2520, 2500, 3015, 3020, 3025 and 3000 series strainers.In the Box: (1) - 2-256 - Sight Glass O-Ring (1) - 2-238 - Cap O-Ring (1) - 2-234 - Cap O-Ring (4) - PFW-2 Set - Sight Glass Bolt Washer (1) - 2-011 - Drain Plug O-ring Before 08/01/01 (1) - 2-111 - Drain Plug O-ring After 08/01/01 *Sold as an Individual  Specifications: Type: Service Kits Box Dimensions: 1"H x 7"W x 7"L WT: 0.05 lbs UPC: 742985065062 Owner's Manual (pdf)

Read more less

BS-1 Stainless Steel Basket - 1.9" x 5.2"GROCO's 304 Stainless Steel filter baskets for the raw water strainers. The baskets have an improved handle design. Specifications: Material: Stainless Steel Box Dimensions: 2"H x 2"W x 8"L WT: 0.1 lbs UPC: 742985175549

Read more less

1/2" NPT #316 Stainless Steel In-Line Ball ValveFeatures: 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Handle has square hole to accept standard ratchet (helps you to reach hard-to-reach valves and eases actuation of hard to operate valves) Thumb-release locking mechanism assures the valve remains in the position selected 1000 WOG rated #316 SS body #304 SS handle and trim Bonding attachment PTFE seats and seals UL listed for fuel or water Full flow Fits IBVF-S for Seacock Application Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 3"W x 6"L WT: 0.7 lbs UPC: 742985139930

Read more less

1-1/2" NPT x 1-1/2" ID Bronze Pipe to Hose Straight FittingFeatures: Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems Specifications: Construction: Bronze Box Dimensions: 2"H x 2"W x 3"L WT: 0.59 lbs UPC: 742985004955

Read more less

1/4" NPT Bronze Inline Fuel ValveFeatures: Selectable handle rotation Full flow Mount foot included C83600 bronze construction Stainless steel handle and hardware 400 WOG PTFE seats and seals UL listed for fuel or water Specifications: Construction: Bronze Box Dimensions: 2"H x 3"W x 5"L WT: 0.55 lbs UPC: 742985142176

Read more less

ARG-2003 Sight Glass Fits ARG-2000Sight glass fits the ARG-2000.

Read more less

1-1/2" Bronze Combo Scoop Thru-Hull w/Nut Features: Designed for increased flow compared to standard Thru Hulls NPSM / NPT combination thread C83600 Bronze Specifications:Thread NPS: 1-1/2" Specifications: Hose Size: 1-1/2" Material: Bronze Box Dimensions: 5"H x 6"W x 7"L WT: 2.2 lbs UPC: 742985063921

Read more less

2" NPT Bronze In-Line Ball ValveFeatures: Female NPT Threads 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Selectable handle rotation Handle has square hole to accept standard ratchet to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves 400 WOG rated Full flow C83600 bronze construction Stainless steel handle and hardware Chrome plated solid brass ball (not a hollow ball) PTFE seats and seals Bonding attachment UL listed for fuel or water Fits IBVF for Seacock Application Specifications: Construction: Bronze Box Dimensions: 4"H x 6"W x 10"L WT: 6 lbs UPC: 742985141889

Read more less

Slow Close Seat & Cover - WhiteThis newly designed seat and cover includes some exciting new features, provided you get excited over a toilet seat.Raritan developed their own seat and covers to make the slow close option more economical and standard on every toilet. In addition to the slow close feature we added a slight ridge to the stops on the underside of the seat. These stops help to eliminate or reduce the possibility of the seat sliding side to side in heavy seas.Our slow close seat is available on all size bowls from the compact marine size bowl to the elongated Atlantes bowl.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 3"H x 14"W x 16"L WT: 6.7 lbs UPC: 085462039713

Read more less

Smart Macerator Control - 12vMonitors motor and pump to prevent dry run and overload.Features: If pump doesn't prime in 7 seconds or runs dry for 5 seconds, control will shut down pump SMC control can be reset by turning off and on switch - power need not be turned off If power is not turned off to the control, control will job macerator pump for a few milliseconds every seven days to prevent binding of impeller If pump draws more than 20 amps, control will shut down pump WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Type: Misc Box Dimensions: 2"H x 6"W x 8"L WT: 0.5 lbs UPC: 085462035616 Brochure (pdf)

Read more less

Brass Snap Handle Drain Plug - 1-1/4" Snap-handle drain plugs feature cam action for easy installation and a leak proof seal. Simply turn the handle clockwise to tighten the plug then snap down the handle to lock. Durable stamped brass and nitrile rubber construction. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

1-1/4" 90 Degree Hose Thru-Hull Fitting Features: 90 Degree Barb #316 Stainless Steel Thru Hull with Bronze Hose Connection UL Listed 647B Specifications: Hose Size: 1-1/4" Material: Stainless Steel Box Dimensions: 5"H x 6"W x 6"L WT: 1.15 lbs UPC: 742985139305

Read more less

Non-Metallic Strainer Cap Fits ARG-1000 & ARG-1250Features: Non-Metallic Strainer Cap  Fits ARG-1000 & ARG-1250

Read more less

Perko 1" Intake Strainer BronzeCast bronzeMachined SlotsTechnical Information: Maximum Pipe Size Inches: 1 Maximum Hull Thickness Inches: 2-1/2 Dimensions Strainer Inches: 3 x 4 Model Number: 0065DP6PLB Ship Weight: 6.4/12.4 Screw Size: #8 Spare Flanged Nut: 0075 Specifications: Material: Bronze Hose Size: 1" Box Dimensions: 3"H x 5"W x 5"L WT: 1.45 lbs UPC: 085226342264

Read more less

500W Heating Element for Nautic B3 Heaters - 110V Made of Incoloy 11" Long 1-5/8" Diameter British threads 7-3/4" Long standard electrical anode rod Specifications: Type: Parts Box Dimensions: 2"H x 2"W x 12"L WT: 0.9 lbs UPC: 8057090079555

Read more less

Strainer Cover Replacement for 1720, 1740, 46200 & 46400Features: Replacement strainer cover for pump inlet strainers For models 1720, 1740, 46200, and 46400

Read more less

Impeller Kit - 8 Blade - Nitrile - 2-9/16" Diameter - Ding DriveMaterial: NitrileDrive Type: Ding Drive - KeywayNumber of Blades: 8Dimensions:Diameter: 2-9/16"Shaft Width: 5/8"Shaft Diameter: 2"Insert Material: BrassJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Sta-Plug® Mini Emergency PlugThe Sta-Plug® Mini™, Forespar's form-fitting emergency plug. A soft cone-shaped design allows it to easily fill the irregular shapes of hull impact breaches, as well as any round hole leak from a hose or through-hull. Unique edge gripping riblets help hold the plug in a hole, keeping water out.Features: The Emergency Plug that Grips 4" High x 2" Diameter Convenient sized version of the popular Sta-Plug Emergency Plug Made from strong elastomer composites  Not susceptible to mold or swelling Bright color allows it to be quickly located Meets US Sailing Special Equipment Requirements Equipped with a lanyard hole Dimensions: 4" (10cm) high, 2" (5cm) diameter at base Made right here in the USA NOT INTENDED FOR FUEL LEAKS

Read more less

Marelon Full-Flow Seacock & 3/4" Mushroom Through-HullThis integrated 2-part system comes complete with a Marelon® valve and properly matched mushroom head thru-hull with super strong “buttress” type threading. This new package is designed to eliminate valve and thru-hull thread style mismatches and associated cross-threading for after market installations common when customers select individual parts from bins.Features: System Includes Full Flow Seacock With Integrated Hose Connector and Mushroom Thru Hull Exceeds ABYC. H-27 Standards - UL Approved For Use Above or Below Waterline Never Corrodes - Exclusive Polymer Formulation Includes Emergency Handle Cap Thru-Hull Plug

Read more less

Marelon Full-Flow Seacock & 1/2" Mushroom Through-HullThis integrated 2-part system comes complete with a Marelon® valve and properly matched mushroom head thru-hull with super strong “buttress” type threading. This new package is designed to eliminate valve and thru-hull thread style mismatches and associated cross-threading for after market installations common when customers select individual parts from bins.Features: System Includes Full Flow Seacock With Integrated Hose Connector and Mushroom Thru Hull Exceeds ABYC. H-27 Standards - UL Approved For Use Above or Below Waterline Never Corrodes - Exclusive Polymer Formulation Includes Emergency Handle Cap Thru-Hull Plug

Read more less

MK5 Manual Black Waste Sanitation PumpWhale has led the way in manual diaphragm pumps for the marine world for decades.The Mk 5 sanitation is a reliable fully housed black waste pump - reliability when you need it mostFeatures and Benefits Can be mounted in various orientations/positions Tough plastic housing keeps in nasty smells Large virtually unblockable valves Easy to clean (no tools required) High performance- 56 ltrs (14.8 US gals) per minute Wide hose connections for maximum performance - 38 mm (1+") Lightweight design for easy operation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 14.8 GPM Operation: Non-Automatic Outlet Size: 1-1/2" Type: Manual Box Dimensions: 8"H x 9"W x 12"L WT: 3.4 lbs UPC: 766478052704

Read more less

Perko 2" IPS Intake Strainer BronzePERKO Intake Strainer are designed for easy installation and cleaning.Features include mounting lugs cast into both sides to assure universalmounting, four outside tie rods and a 316 stainless steel strainer basket tominimize electrolysis. Screen hole diameter .077 inches, 46% open area.Hinged lugs for the cast bronze cover permit easy removal and cleaning ofthe strainer basket. A drain plug in the bottom casting is provided for easily removing sediment and draining for winterizing.Cast bronze.Please note: Spare parts for this item are NOT interchangeable withthe Perko 0593 Flushing Strainer.Technical Information: Pipe Size Inches: 2 Height Overall Inches: 16 Width Overall Inches: 7-1/2 Model Number: 0493009PLB Dimensions Cylinder Inches: 6 x 12 Dimensions Basket Inches: 3-5/16 x 12-1/4 Open Area to Pipe Size Ratio: 13.1 Ship Weight: 18.0 Spare Gasket Kit: 0493DP999M (or) 99R Made in the USA

Read more less