Impeller Kit - 8 Blade - Nitrile - 2-9/16" Diameter - Spline DriveMaterial: NitrileDrive Type: Single Flat DriveNumber of Blades: 8Dimensions:Diameter: 2-9/16"Shaft Width: 5/8"Shaft Diameter: 2"Insert Material: BrassJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

1-1/2" x 50' Coil - Premium Marine Sanitation Hose - White with Green StripeTrident Premium Sanitation Hose resistant to odor permeation. Simply the BEST solution for marine environments, built with EPDM rubber to ensure the overall performance and resistance to odor permeation that you would expect in a sanitation hose. Features: Resistance to Odor Permeation and winterizing with antifreeze  With wire helix between 2 ply reinforcement this hose has excellent bend radius, flexibility, and fitting acceptance and retention This makes for easy installations with no heatgun or lubricant necessary 10 Year Warranty Application: Premium Sanitation Hose for all head & holding tank connections NOT for potable water Construction: Tube & Cover: EDPM/SBR Rubber Color: White with Green Stripe Reinforcement: Polyester reinforcement + spring steel wire helix Temperature Range: -20F-220°F (-29°C-104°C) Length: 50’ (15m) Specifications: Inner Diameter: (inch) 1-1/2" / (mm) 38.1 Outer Diameter: (inch) 2 / (mm) 50.8 Working Pressure: (Psi) 60 / (bar) 4.1 Weight: (Lb./50ft.) 44 / (Kg/m) 19.9 Bend Radius: (inch) 3" / (mm) 76.2 *Burst Pressure is 4 x Working Pressure Specifications: Length (Feet): 50' ID Diameter (inches): 1-1/2" Box Dimensions: 5"H x 26"W x 26"L WT: 37.7 lbs UPC: 704917015514 Quick Guide (pdf)

Read more less

Replacement Strainer BaseReplacement Strainer Base f/Rule Mate Bilge Pumps Fits Pre-2009 Rule Mate Models RM500, RM750 & RM1100WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Strainers Box Dimensions: 3"H x 5"W x 6"L WT: 0.1 lbs UPC: 042237085658

Read more less

2-1/2" Bronze Thru-Hull Fitting with NutHigher flow rates are possible with this 2-1/2" GROCO thru-hull fitting than conventional thru-hulls.Features: NPSM / NPT combination thread C83600 Bronze UL listed 647B Includes nut  BSPP and stainless steel models are available Specifications:Thread NPS: 2-1/2" Specifications: Hose Size: 2-1/2" Material: Bronze Box Dimensions: 5"H x 5"W x 5"L WT: 3.2 lbs UPC: 742985064157

Read more less

1-1/4" Bronze High Speed Thru-Hull Fitting w/Nut Features: Designed for increased flow compared to standard Thru Hulls and with less drag NPSM / NPT combination thread C83600 Bronze Specifications: Hose Size: 1-1/4" Material: Bronze Box Dimensions: 3"H x 3"W x 4"L WT: 1.05 lbs UPC: 742985143128

Read more less

Intake Filter - Round - PlasicFeatures: Two-piece filter, easily installs by placing the mounting base under the aerator thru hull nut and then tightening the nut Twist off to remove for easy cleaning Round Plastic Intake Filter

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (1-3/4" – 2-1/4") Clamping Range - 10-Pack - SAE Size 28Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 28 Hose Inner Diameter: (inch) 1-1/2" - 1-5/8"  Clamping Range: (inch) 1-3/4"– 2-1/4" / (mm) 44-56 Recommended Torque Inch lbs: 45-60 Quick Guide (pdf)

Read more less

Ultimate 757 12V 2-Speed 7" Fan - Direct Wire - WhiteDirect wire only. FingerSafe blade allows for maximum airflow. Two-speed options.The 757 Ultimate 12V DC fan has long been a favorite among Caribbean sailors where good boat ventilation is a must. The two-speed motor and FingerSafe blade move large masses of air throughout the boat from the V-berth to the galley. This is the fan that will let boaters enjoy their boating investment.Features: Two speeds Direct wire Comes with a permanent mounting option Long life, low power drawing motor Adjustable base and tilting head Benefits: Maximum airflow Easy to clean Easy to install Quiet, dependable operation Direct air in any direction Match any boat interior The fan stays in place in rough seas Owner's Manual (pdf)Brochure (pdf)

Read more less

5/8" x 50' Clear Reinforced PVC Hose Tubing Red & Blue TracerNylon reinforced. FDA compounded PVC for pressurized drinking water systems, etc. No taste or odor. #162=175 PSI (1.21Mpa). Operating temperatures +20° to +150° F (-7° to +66°C). NOT RECOMMENDED FOR BELOW-WATERLINE THRU-HULL CONNECTIONS. CA Prop 65 Compliant.Specifications: Sizes: 3/8" to 1", 9.5 mm & 25.4 mm Colors: #164 - White with Blue Tracer, #162 - Clear with Blue & Red Tracer Packing: 250’ (76m) Coil, 50’ (15m) Boxed, 25’ (7.6m) Boxed Specifications: ID Diameter (inches): 5/8" Length (Feet): 50 Box Dimensions: 6"H x 19"W x 19"L WT: 8.75 lbs UPC: 704917006871

Read more less

1-1/8" x 50' Box Bilge & Live Well Hose Clear with Black HelixHeavy-duty bilge, drain, and live well hose. Clear vinyl (FDA) corrugated with black hard PVC helix and smooth tube. Provides exceptional flexibility and bend radius. *NOT RECOMMENDED FOR BELOW-WATERLINE THRU-HULL CONNECTIONS. No cuffs required. Operating temperatures +10° to +140° F (-12° to +60°C). CA Prop 65 Compliant.Specifications: Sizes: 5/8" to 1-1/2", 16mm to 38mm Colors: Clear with Black Helix Packaging: 100' (30.5m) Coil, 50' (15m) Boxed Specifications: ID Diameter (inches): 1-1/8" Length (Feet): 50 Box Dimensions: 5"H x 22"W x 23"L WT: 10.1 lbs UPC: 704917006031

Read more less

1-1/4" x 50' Box VAC XHD Bilge & Live Well Hose Black - Soft Plasticizer Wall149-Black ”Extra Flexible”. Smooth extra heavy wall vinyl hose. Excellent durability, flexibility & bend radius for XHD bilge, live well, drain, scupper lines, etc. No cuffs required. Operating temperatures +10° to +140° F (-12° to +60°C). CA Prop 65 Compliant.Specifications: Sizes: 5/8" to 1-1/2", 16mm to 38mm Colors: Clear with Black Helix Packaging: 100’ (30.5m) Coil, 50’ (15m) Boxed Specifications: ID Diameter (inches): 1-1/4" Length (Feet): 50 Box Dimensions: 8"H x 22"W x 23"L WT: 18.4 lbs UPC: 704917010458 Quick Guide (pdf)

Read more less

1-1/8" x 50' Box White Bilge HoseExtremely flexible corrugated polyethylene hose for bilge intake and discharge. Cuffed every foot for clamping. Resists oily bilge and seawater. *NOT RECOMMENDED FOR BELOW-WATERLINE THRU-HULL CONNECTIONS. Operating temperatures -40° to +200° F (-40° to +93°C).Specifications: Sizes: 5/8" to 1-1/2", 16mm to 38mm Colors: White Packaging: Bulk Box: 1000' (305m) to 150' (46m), Boxed: 100' (30.5m) & 50' (15m) Specifications: ID Diameter (inches): 1-1/8" Length (Feet): 50 Box Dimensions: 8"H x 22"W x 23"L WT: 5.85 lbs UPC: 704917005232

Read more less

1" x 50' Box VAC XHD Sanitation Hose - Hard PVC Helix - WhiteTrident Ply Extra heavy-duty sanitation hose of smooth white vinyl. Specially compounded to provide excellent resistance to odor permeation and (FDA) potable water fill. Also for the critical bilge, drain scuppers, live wells, etc. Self-draining installations are recommended for the longest odor-free service.Features: A hard PVC helix gives good flexibility and bend radius No cuffs are required Application: Specially compounded to provide resistance to odor permeation and (FDA) potable water fill Also for critical bilge, drain scupper, live well, etc Specifications: Tube & Cover: Hard PVC helix Color: White Reinforcement: PVC Helix Temperature Range: 10°F-120°F (-12°C-48°C)  Boxed: 50ft. / (15.2m) Inner Diameter: (inch) 1" / (mm) 25.4 Outer Diameter: (inch) 1.262" / (mm) 32.1 Working Pressure: (Psi Vac In./Hg) 28 Weight: (Lb./ 50 ft.) 15 / (Kg/m) 0.52  Bend Radius: (inch) 3" / (mm) 76.2 *Don't use with alcohol, anti-freeze, petrochemicals, or solvents*Burst Pressure is 4 x Working Pressure Specifications: Length (Feet): 50' ID Diameter (inches): 1" Box Dimensions: 5"H x 22"W x 22"L WT: 15.75 lbs UPC: 704917006291 Quick Guide (pdf)

Read more less

1-1/8" x 50' VAC XHD Bilge & Live Well Hose - Hard PVC Helix - BlackTrident VAC XHD Bilge and Live Well Hose. Helical PVC reinforcement provides excellent flexibility and bend radius for live well and heavy-duty bilge applications. It has a smooth outer surface to allow for easy clamping. The excellent bend radius of this product gives you the flexibility of a rubber hose, making installations a breeze.Features:149 series of hoses is extra flexible Application:Bilge and live well hoseSpecifications: Tube & Cover: Hard PVC helix Color: Black Reinforcement: PVC Helix Temperature Range: 10°F-120°F (-12°C-48°C)  Boxed: 50ft. / (15.2m) Inner Diameter: (inch) 1-1/8" / (mm) 28.6 Outer Diameter: (inch) 1.433" / (mm) 36.4 Working Pressure: (Psi Vac In./Hg) 28 / (Bar) 1.93 Weight: (Lb./ 50 ft.) 15 / (Kg/m) 6.80  Bend Radius: (inch) 3" / (mm) 76.2 *Burst Pressure is 4 x Working Pressure Specifications: Length (Feet): 50' ID Diameter (inches): 1-1/8" Box Dimensions: 8"H x 23"W x 23"L WT: 15 lbs UPC: 704917010434 Quick Guide (pdf)

Read more less

1" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the FootTrident Flex wet exhaust hose for longer bent connections. In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.Features:  Sold by the foot Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius  Resists heat, ozone, exhaust, sani chemicals, panting, and collapse Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Specifications: Inner Diameter: (inch) 1" / (mm) 25.4 Outer Diameter: (inch) 1.57" / (mm) 25 Working Pressure: (Psi) 80 / (bar) 5.5 Bend Radius: (inch) 1.3" / (mm) 33 Weight: (Lb./50ft.) 30 / (Kg/m) 13.5 *Burst Pressure is 4 x Working PressureThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 1" Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 6"L WT: 0.49 lbs Quick Guide (pdf)

Read more less

Sensor Max II 5 GPM Variable Speed Freshwater Pump - 12V, 40 PSIExceptional performance and life for total peace of mind with your onboard water system. The Sensor-Max II is the most sophisticated freshwater delivery pump featuring variable speed technology. The Sensor-Max II incorporates a high-performance five-chamber design with an advanced pressure sensor and variable speed programming that automatically adjusts the motor speed to deliver the right flow and pressure the water system requires. The result is an extremely quiet pump operating smoothly in the background for a truly exceptional onboard experience for total peace of mind while at sea. Features: Quiet operation with no water hammer Consistent pressure and smooth, steady flow Eliminates the need for an accumulator tank High flow capacity, supplies up to five outlets Conserves power by adjusting motor speed as needed Robust co-molded diaphragm and cast aluminum lower housing for long life Quick Guide (pdf)

Read more less

AquaT Marine Manual ToiletThe fine finish and well thought-through design of these toilets is remarkable. Made from white vitreous porcelain, and with corrosion resistant parts throughout, the Johnson Pump AquaT marine toilet, is quiet, robust and easy to clean.The AquaT toilet will give you years of trouble free operation. The manual version incorporates an ergonomically designed, hand-powered piston pump that can be mounted for either left-hand or right-hand use. When spare parts such as a new seat or valve are needed, you'll find Johnson Pump's global network of distributors at your service.It's probably fair to think of most toilets as commonplace products, but look at the features and you're sure to see that the AquaT is far from ordinary. Quiet, hygienic and reliable, the Johnson Pump AquaT marine toilet is perfect for almost any marine toilet room.CE-approvedFeatures Whisper quiet operation Self-priming pump Clean lines - pleasing to the eye Hygienic, easy-to-clean vitreous china bowl and exterior surfaces Robust wooden seat with durable baked enamel finish Low water consumption (2-2.5 l/flush) makes the most of holding tank capacity Versatile plumbing connection options Automatic back-flow prevention Available in comfort or compact bowl sizes Designed for virtually any onboard mounting position May be installed above or below the waterline Suitable for OEM or replacement installation Corrosion resistant materials throughout Long service life Ergonomic pump handle for ease of use Pump can be mounted left or right of the toilet bowl Innovative brake bushing prevents annoying leakage at the handle Specifications: Color: White Inlet Size: 3/4" Operation Method: Manual Outlet Size: 1-1/2" or 1" Volts: 12v Type: Toilet Box Dimensions: 16"H x 17"W x 19"L WT: 27.5 lbs UPC: 7330717009779 Owner's Manual (pdf)

Read more less

0591 Vented Fill f/1-1/2" Hose - Straight Neck - ChromeChrome Plated Bronze Cap Black Polymer Body Straight Neck & Heavy Duty Stainless Steel Bead Chain Integral Tank Vent with Flame Arrestor and Anti Surge Valve (on diesel only) Deck Plate Key Not Required *Note: Consider using the Mounting Ring (Fig. 0540DPRBLK) for all installations. DP package includes mounting ring. Technical Information For Hose Size: 1-1/2" For Vent Hose: 5/8" Mounting Hole Dia.: 2-1/8" O.D. Flange: 3-3/8" Neck Length: 2-7/16" Screw Size: #8

Read more less

Flush Pro Valve Kit - 1"Finally! Fresh flushing of your inboard is as simple as connecting a garden hose.Features: Polymer Stainless Steel Spring Flush your boat engine safely and easily Transparent body allows for visual inspection of water flow Durable check valve system activated by water pressure from a garden hose Check valve automatically shuts off hull intake when water pressure is applied Adapter supplied with Flush Pro make winterizing your boat easy Can be used with on board generators Available for Standard 1" Hose Sizes Kit Includes:Water Inlet Fitting (Part #0499) Owner's Manual (pdf)

Read more less

Perko 1" Pipe to Hose Adapter Straight BronzeCast bronzeCast hex for easier installationPrecision machined hose barbTechnical Information: Pipe Size Inches: 1 Hose Size Inches: 1 Length Overall Inches: 1-3/4 Model Number: 0076DP6PLB Ship Weight: 1.9/7.9 lbs. MADE IN THE USA Specifications: Construction: Bronze Box Dimensions: 2"H x 2"W x 3"L WT: 0.2 lbs UPC: 085226035081

Read more less

Perko 1-1/2" Pipe to Hose Adapter Straight BronzeCast bronzeCast hex for easier installationPrecision machined hose barbTechnical Information: Pipe Size Inches: 1-1/2 Hose Size Inches: 1-1/2 Length Overall Inches: 2-1/2 Model Number: 0076DP8PLB Ship Weight: 3.9/18.6 lbs. MADE IN THE USA Specifications: Construction: Bronze Box Dimensions: 2"H x 2"W x 5"L WT: 0.75 lbs UPC: 085226035111

Read more less

ADC Bacteriostatic Everpure® FilterGreat tasting, healthy, clean water! Nothing spoils fun like the taste of contaminated water or the discomfort of an intestinal illness. When used as directed with the super-chlorination process, this water treatment system provides a high level of protection for the family from viruses, bacteria, and waterborne cysts such as Cryptosporidium and Giardia lambia. The Everpure water treatment system uses a process called super chlorination/dechlorination. Ordinary household bleach is added to the storage tank, which kills bacterial or viral contaminants. Then the water is fine-filtered down to 1/2 micron to reduce the taste and odor of chlorine, as well as off-taste and odors.This Everpure filter includes exclusive technology that reduces 99.9% of all particles 0.5 micron in size.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Brochure (pdf)

Read more less

Rule 2000Non-Automatic 12v, UL listed w/ 6' wire leadsEngineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet.FEATURES Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 2000 GPH Operation: Non-Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 5"H x 5"W x 6"L WT: 3.15 lbs UPC: 042237085160 Owner's Manual (pdf)

Read more less

Ceramic Family Tap with Folding Spout - Chrome FinishFolding cold water tap with a high-reach swivel and folding spout. This particular part has a chrome finish.Specifications: Water Connection (inch): 3/8" BSP-M threaded shaft (1/2" NPS-M adapters included) Material: Solid brass with a chrome finish Mounting Hole (inch): 5/8" Shipping Weight: 3 lbs. *The "P" within the part number indicates retail packaging

Read more less

Elbow Sprayer - Handle Pull Out - White with 6' Hose  This standard elbow sprayer is as reliable as it is functional.Features: White sprayer with a 6 ft. white nylon hose The included counter-top holder leaves the sprayer in a ready-for-action position The sprayer handle features a trigger sprayer for on/off control or a flip-up lock for continuous water flow Specifications: Water Connection: 3/8 in. BSP-F fitting Material: Glass reinforced plastic sprayer with nylon or chrome plated brass hose Mounting Hole: 1-1/16 in. Shipping Weight: 4 lbs. *The "P" within the part number indicates retail packaging

Read more less

Toilet Standard Electric EVO Compact - 12VStandard electric compact toilet with a combined electrical 12V macerator and pump for waste disposal and flushing in one single operation.Including one touch electrical control panel. Easy to clean white ceramic bowl and white wooden seat. Stable base for robust installation. Port conections inlet 19mm (3/4″), outlet 25mm or 38mm (1″ or 1,5″).Plug & play/ interchangeable with Jabsco 37010-0090, Johnson Pump 80-47435-01 and other single operated electrical toilet models.Specifications: Weight: 9 kg/24 lbs Dimensions: 420/16.5L x 390/15.35H x 335/13.2W mm/in  Type: Single Operation Electric *Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Size: Compact Size Color: White Inlet Size: 3/4" Operation Method: Electric Outlet Size: 1" or 1-1/2" Rinse Water: RAW Volts: 12v Type: Toilet Box Dimensions: 16"H x 18"W x 19"L WT: 27.35 lbs UPC: 7340176601490

Read more less

Automatic Bilge Pump 750 GPH - 24VFully automatic bilge pump 12V, automatic activation with a built in electrical level switch. Pump capacity 50 L/min (750 GPH) and 42 L/min (660 GPH) at 1m head. Stainless steel shaft, compact and easy to install.Tough thermoplastic ABS housing and removable base plate with strainer integrated. Easy maintenance and low power consumption. A three wire design allows for automatic, manual or override mode.Features: Automatic Submersible Includes 19 mm (3/4″) straight and elbow detachable discharge ports For pleasure boats from 6m (18 Ft) to 8m (25 Ft) length Specifications: Weight: 0.45 kg/1 lb Dimensions: 151/6L x 95/3.75H x 78/3W mm/in  Fuse: 2,7A *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Type: Electric Gallons Per Hour: 750 GPH Gallons Per Minute: 12 GPM Operation: Automatic Outlet Size: 1-1/4" or 1-1/2" Volts: 24v Box Dimensions: 4"H x 5"W x 7"L WT: 1.3 lbs UPC: 7340176600165

Read more less

1700 Series Water Heater120v12 GallonW/O Engine Heat ExchangerThe "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P ( temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank.Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently.Raritan's water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are 3/4" male NPT (National Pipe Thread). Heat exchanger connections are 3/4" female NPT.Benefits: Simple installation - retrofits to most on-board pressure systems Proven long-life design Withstands the rigors of the marine environment Glass-lined steel tank is more durable than stainless steel Attractive polymer jacket resists corrosion from dampness Ignition-protected, adjustable thermostat Round tanks are designed to withstand more pressure than square tanks Glass-lined steel tank for long life and high efficiency Environmentally friendly CFC-free foam insulation Replaceable magnesium anode to protect tank and neutralize acids in the water The tank is covered by a five-year Limited Warranty Each unit is assembled by hand, individually tested and backed by Raritan's two-year Limited Warranty and legendary technical support team WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 12 Heat Exchanger: No Volts: 120v Box Dimensions: 21"H x 23"W x 23"L WT: 50 lbs UPC: 085462001536 Owner's Manual (pdf)Brochure (pdf)

Read more less

Crown Head™ Front Cover with O-RingRaritan's Crown Head™ Front Cover includes the O-Ring.Raritan manufactures equipment for pleasure boats throughout the world. Products include marine toilets, waste treatment systems, icemakers and water heaters. Committed to the environment and preserving sea life, Raritan designs products to help maintain an environmental balance and ensure the quality of marine waters.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 3"H x 4"W x 4"L WT: 0.1 lbs UPC: 085462006050

Read more less

EvoFlex Drinking Water Hose - 50'Camco’s Evo Flex 50-Foot Drinking Water Hose with 5/8-inch ID is ideal for RV and marine use. Its extra flexible construction holds no memory, making it easier to position and store. Features nickel-plated machined fittings. Drinking water safe with a lead-free, BPA-free and phthalate-free formulation. The hose leaves no strong plastic taste in your water. UV-stabilized for a long life. Made in the USA.Features: Extra Flexible Design: Holds no memory, making it easier to position and store The Perfect Size Hose: 50-foot hose with 5/8-inch diameter Drinking Water Safe: Contains a BPA-free, lead-free and phthalate-free formulation Provides Great Tasting Water: The hose won't leave a strong plastic taste in your water Durable Construction: Features nickel-plated machined fittings; UV-Stabilized: For a long life Made in the USA: Product is proudly made in the USA

Read more less

PUREWATER+All-In-One Water Filtration System 0.5 Micron Replacement Filters - 2-PackFeatures: Simple filter change by twisting off faucet head simply dropping filter into cartridge without crawling under sink On-demand ultra-clean tasting water from your tank Elegantly styled Simple to install Compact filter housing maximizes under sink storage

Read more less

2" Stainless Steel Extra Long Thru-Hull Fitting w/Nut Features: Extra long NPSM / NPT combination thread #316 Stainless Steel Specifications: Hose Size: 2" Material: Stainless Steel Box Dimensions: 5"H x 6"W x 7"L WT: 2.6 lbs UPC: 742985175198

Read more less

Bronze Round Hull Strainer with Access Door for Up To 2" Thru-Hull Features: Patented access door design allows easy access to Thru Hulls. C84400 bronze body and door. Cast filter holes. Designed for systems where forced flow is not needed or wanted. Specifications: Max T-Hull: 2" Perf Dia.: Cast Holes Specifications: Construction: Bronze Box Dimensions: 1"H x 6"W x 6"L WT: 1.6 lbs UPC: 742985073739

Read more less

1" NPT #316 Stainless Steel In-Line Ball ValveFeatures: 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Handle has square hole to accept standard ratchet (helps you to reach hard-to-reach valves and eases actuation of hard to operate valves) Thumb-release locking mechanism assures the valve remains in the position selected 1000 WOG rated #316 SS body #304 SS handle and trim Bonding attachment PTFE seats and seals UL listed for fuel or water Full flow Fits IBVF-S for Seacock Application Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 5"W x 7"L WT: 1.6 lbs UPC: 742985139800

Read more less

3/4" NPT x 3/4" ID Stainless Steel Pipe to Hose Straight Fitting Features: Male NPT x Hose connection #316 Stainless Steel Sizes from 1/2" to 3" Standard Flow NSF-61 compliant Suitable for use in potable water systems Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 2"W x 4"L WT: 0.29 lbs UPC: 742985143371

Read more less

ARG-1250 Series 1-1/4" Raw Water Strainer with Non-Metallic Plastic BasketFeatures: Mounting System Allows Removal Without Tools Bonding Connection Both Sides O-Ring Seal All Joining Surfaces Filter Basket Options: #304 SS (Standard), Monel & Non-Metallic One-Piece Molded Sight Glass Eliminates Tie Rods and Gaskets Improved Drain Plug Non-Metallic Cap Magnifies Internal Viewing NPT or BSPP Threaded Ports Improved Basket Design C84400 bronze head casting UL Listed 255-D  Specifications: Material: Plastic Box Dimensions: 6"H x 7"W x 12"L WT: 6.45 lbs UPC: 742985106895

Read more less

Stainless Hold-Down BracketStainless hold-down bracket for low-profile bilge water pickups. BRACKETS ARE NOT INCLUDED WITH BILGE-B-DRY ORDERS. If needed, use the stainless hold-down bracket to help secure your low-profile bilge water pickup.Specifications: Dimensions (inches): Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L Dimensions (mm): Rectangular Pickup: 50 H x 60 W x 100 L This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Cartridge Bilge Pump 750GPH - 12VSubmersible bilge pump 12V with pump capacity 50 L/min (750 GPH) and 42 L/min (660 GPH) at 0,9m (3ft) head. Stainless steel shaft, compact and easy to install.Features: Tough thermoplastic ABS housing with detachable universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation  Replaceable cartridge motor  Easy maintenance and low power consumption Specifications: Including 19 mm (3/4″) straight and elbow detachable discharge ports  Amperage: 2,7 A  Fuse Size: 5A  For pleasure boats from 6m (18 Ft) to 8m (25 Ft) length Specifications: Gallons Per Hour: 750 GPH Gallons Per Minute: 12 GPM Type: Electric Volts: 12v Operation: Non-Automatic Outlet Size: 3/4" Box Dimensions: 4"H x 4"W x 5"L WT: 0.85 lbs UPC: 7340176600028

Read more less

Gulper Grouper Mk3 Fishbox/Waste Pump w/90° Ports - 24VNon clog electric Waste pumps without filters, built on more than a decade of market leading valve technology.Proven Diaphragm TechnologyWhale Gulper waste products have been at the forefront of marketing leading waste technology for over 2 decades. Rather than impeller motors, Gulper pumps contain reciprocating heavy duty diaphragms and specialized non-choke valves to handle grey, bilge, black and fishbox waste on board.Ideal Macerator Replacement in Fishbox InstallationsThe Gulper Grouper Mk 3 builds on the decades of proven pump technology and now features 90° inlet and outlet ports with integrated non-choke valves. The improved design allows the pump to be used as a direct replacementfor macerator impeller pumps. Compared to typical macerators, the Gulper Grouper Mk 3 is quieter and lightweight. With diaphragm technology, the pump does not clog or suffer from motor burn out meaning a longer system life and less unwanted maintenance jobs! With a low power consumption and run dry capability the Gulper Grouper Mk 3 really is the pump of choice for fishbox evacuation.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Waste Pumps Inlet Style: Angled Box Dimensions: 6"H x 7"W x 14"L WT: 5 lbs UPC: 766478950307 Brochure (pdf)

Read more less

HYDRA™ Cartridge Bilge Pump - 1100 GPH - 12VThe HYDRA™ Cartridge Bilge Pump is engineered for dependable marine water removal with a service-friendly cartridge design that allows rapid motor replacement without removing the pump housing. Backed by 4,000 hours of testing, HYDRA delivers consistent performance through an advanced anti-airlock design that ensures reliable restarts—even when air is present in the line.Built for long-term durability in harsh marine environments, the HYDRA Cartridge Bilge Pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge system allows quick, tool-free motor removal for fast servicing on the water or at the dock.Designed with OEM-friendly installation in mind, the positive-lock strainer base matches most standard mounting patterns, and the pump includes straight and 90° outlets, a backflow restrictor, and a flat seal for flexible plumbing configurations. Available in 600 GPH, 800 GPH, and 1100 GPH options and meeting ABYC, ISO, and U.S. Coast Guard standards, the HYDRA Cartridge Bilge Pump delivers reliable performance boaters can trust.Features: AMP DRAW: Approx. 5A FUSE SIZE: 7.5 AMPFLOW RATE: 1100 GPH ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line. 316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability. PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise. REMOVABLE NOZZLE: Allows quick service without disconnecting the hose. STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance. POSITIVE-LOCK STRAINER BASE: Mounting pattern matches most manufacturers. DUAL LOCK CARTRIDGE: Designed for quick removal and fast service. INCLUDES: Straight & 90º Outlet, Backflow Restrictor, and Flat Seal. Specifications: Gallons Per Hour: 1100 GPH Gallons Per Minute: 18 Type: Pumps/Drives Volts: 12 Box Dimensions: 6"H x 6"W x 9"L WT: 1.4 lbs UPC: 733572258332

Read more less

HYDRA™ Livewell Pump - 1100 GPH - 12V - Short NozzleThe T-H Marine HYDRA™ Livewell Pump is engineered for consistent livewell circulation with simplified service and dual-function capability for serious anglers. Backed by 4,000 hours of testing, HYDRA delivers dependable performance through an anti-airlock design that ensures reliable restarts—even when air is present in the line.Designed for durability in harsh marine environments, the pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion over time. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge design allows fast motor removal and service without disconnecting hoses or plumbing.Built with versatility in mind, the HYDRA Livewell Pump includes a secondary outlet for wash-down applications, an integrated sealant channel to prevent leaks, and both short and long threaded intake options for flexible installations. Available in 600, 800, and 1100 GPH configurations and meeting ABYC, ISO, and U.S. Coast Guard standards, HYDRA is the premium solution for reliable livewell performance.Features: SHORT: 1.5" (3/4"-14) Threaded intake tube (Hole installation size: 1-1/16" FLOW RATE: 1100 GPH AMP DRAW: Approx. 5A FUSE SIZE: 6 AMP INSTALL HOLE: 1-1/16" ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line. 316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability. PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise. REMOVABLE NOZZLE: Allows quick service without disconnecting the hose. STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance. DUAL-LOCK CARTRIDGE: Designed for quick removal and fast service. SECONDARY OUTLET: Dedicated outlet for wash-down pump. SEALANT CHANNEL: Integrated to prevent leaks. Specifications: Gallons Per Hour: 1100 GPH Gallons Per Minute: 18 Type: Pumps/Drives Volts: 12 Box Dimensions: 6"H x 6"W x 9"L WT: 1.4 lbs UPC: 733572258318

Read more less

HYDRA™ Livewell Pump - 1100 GPH - 12V - Long NozzleThe T-H Marine HYDRA™ Livewell Pump is engineered for consistent livewell circulation with simplified service and dual-function capability for serious anglers. Backed by 4,000 hours of testing, HYDRA delivers dependable performance through an anti-airlock design that ensures reliable restarts—even when air is present in the line.Designed for durability in harsh marine environments, the pump features a precision-balanced motor and a 316 stainless steel motor shaft to reduce vibration, noise, and corrosion over time. Stator vane technology optimizes flow efficiency, while the dual-lock cartridge design allows fast motor removal and service without disconnecting hoses or plumbing.Built with versatility in mind, the HYDRA Livewell Pump includes a secondary outlet for wash-down applications, an integrated sealant channel to prevent leaks, and both short and long threaded intake options for flexible installations. Available in 600, 800, and 1100 GPH configurations and meeting ABYC, ISO, and U.S. Coast Guard standards, HYDRA is the premium solution for reliable livewell performance.Features: LONG: 3.5" (3/4"-14) Threaded intake tube (Hole installation size: 1-1/16") FLOW RATE: 1100 GPH AMP DRAW: Approx. 5A FUSE SIZE: 6 AMP INSTALL HOLE: 1-1/16" ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line. 316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability. PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise. REMOVABLE NOZZLE: Allows quick service without disconnecting the hose. STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance. DUAL-LOCK CARTRIDGE: Designed for quick removal and fast service. SECONDARY OUTLET: Dedicated outlet for wash-down pump. SEALANT CHANNEL: Integrated to prevent leaks. Specifications: Gallons Per Hour: 1100 GPH Gallons Per Minute: 18 Type: Pumps/Drives Volts: 12 Box Dimensions: 6"H x 6"W x 9"L WT: 1.45 lbs UPC: 733572258325

Read more less

Recessed Flapper Scupper Drains - WhiteThese innovative push-together scuppers easily snap together to adjust to varying hull thicknesses. The mating ribs lock the pieces together for a secure installation. The male portion can be cut off to accommodate thinner hulls. Available in two different female lengths to accommodate hulls from 1 1/2" to 3 5/8". Installs in a 1-7/8" hole. Flange O.D. is 2 15/16".Features: Low-profile design enhances aesthetic appeal while ensuring functionality Flexible thermo-plastic flappers resist curling, rotting, and loss of sealing

Read more less

HYDRA™ Automatic Bilge Pump - 1100 GPH - 12VThe T-H Marine HYDRA™ Automatic Bilge Pump is engineered for reliable, high-performance water removal with long-term durability built in. Backed by 4,000 hours of testing, HYDRA delivers dependable operation through its advanced anti-airlock design, ensuring reliable restarts even when air is present in the line. A precision-balanced motor with a 316 stainless steel motor shaft reduces vibration, noise, and corrosion for smooth, long-lasting performance in harsh marine environments.Designed for simplified service and OEM-friendly installation, HYDRA features a removable nozzle for quick maintenance without disconnecting hoses and a positive-lock strainer base that matches most standard mounting patterns. The integrated Sure-Start™ float switch and programmed start delay prevent false starts and extend pump life, while the external test knob allows fast manual operation checks. Available in 800 GPH and 1100 GPH models and meeting all major ABYC, ISO, and U.S. Coast Guard standards, HYDRA is built for confidence on every outing.Features: FLOW RATE: 1100 GPH AMP DRAW: Approx. 5A FUSE SIZE: 7.5 AMP ANTI-AIRLOCK DESIGN: Engineered to restart reliably, even with air in the line. 316 STAINLESS STEEL MOTOR SHAFT: Corrosion-resistant for long-term durability. PRECISION BALANCED MOTOR: Runs smoother with reduced vibration and noise. REMOVABLE NOZZLE: Allows quick service without disconnecting the hose. STATOR VANE TECHNOLOGY: Optimizes flow efficiency and performance. POSITIVE-LOCK STRAINER BASE: Mounting pattern matches most manufacturers. SURE-START FLOAT SWITCH: Corrosion-proof design for a reliable start every time. EXTERNAL TEST KNOB: Allows for quick manual testing. INCLUDES: Straight & 90º Outlet, Backflow Restrictor, and Flat Seal. Specifications: Gallons Per Hour: 1100 GPH Gallons Per Minute: 18 Operation: Automatic Type: Pumps/Drives Volts: 12 Box Dimensions: 6"H x 6"W x 9"L WT: 1.75 lbs UPC: 733572258349

Read more less

Slinger Kit *3-PackJabsco toilet slinger.

Read more less

Ultimate 757 24V 2-Speed 7" Fan - Direct Wire - WhiteDirect wire only. FingerSafe blade allows for maximum airflow. Two-speed options.The 757 Ultimate 24V DC fan has long been a favorite among Caribbean sailors where good boat ventilation is a must. The two-speed motor and FingerSafe blade move large masses of air throughout the boat from the V-berth to the galley. This is the fan that will let boaters enjoy their boating investment.Features: Two speeds Direct wire Comes with a permanent mounting option Long life, low power drawing motor Adjustable base and tilting head Benefits: Maximum airflow Easy to clean Easy to install Quiet, dependable operation Direct air in any direction Match any boat interior The fan stays in place in rough seas Owner's Manual (pdf)Brochure (pdf)

Read more less

BP-6 Poly Basket - 3.1 x 10.1"Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches in length, and from 1.9 to 3.1 inches in diameter.Fits: ARG-1500 VD-1500 Specifications: Material: Plastic Box Dimensions: 3"H x 3"W x 10"L WT: 0.25 lbs UPC: 742985175006

Read more less

ARG-1503 Sight Glass Fits ARG-1500Sight glass fits the ARG-1500.

Read more less