Raymarine p70s Autopilot Control Model: E70328 UPC: 723193812303 3.5 in super bright oversized LCD for maximum visibility All weather, low power, optically bonded display technology delivers brighter colours, sharper contrast, and a wide viewing angle Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer Display the pilot information in different formats with automatic 3-step setup for leisure, cruising and performance Simple system and group dimming / illumination Easy to use Lighthouse user interface with sculpted rubber keypad for precise operation in all conditions SeaTalkng networking for seamless connectivity to Raymarine systems and NMEA2000* networks New glass bridge industrial design compliments Raymarine eS and gS Series multifunction displays Supplied with both black (eS Series style) & (e Series style) gunmetal bezels and protective suncover SpecificationsDisplay size3.5 in Display type Sunlight readable optically bonded LCD Display resolution 320 x 240 Colors 16 bit LCD Brightness 1200 nit Connections SeaTalk & SeaTalkng compliant with NMEA2000 marine networks Waterproofing IPX6 Input Voltage 9 to 16v DC Input Draw 1.6 watts

Read more less

Wind transducer compatible with: ST70* ST60+ ST290 Standard length 26 in. Includes 100 ft cable. *Using with ST70 requires purchase of ST70 Wind Pod, sold separately

Read more less

Invented by Autohelm in 1973, tiller pilots have consistently been the world's most popular pilot ever since, setting the standard for performance, reliability and ease of use. Advanced features are standard. AutoTack lets you handle the sheets, while the pilot tacks the boat and AutoSeastate intelligently keeps the boat on course while conserving power. Whether used as a stand-alone pilot or with a SeaTalk/NMEA GPS, the clear backlit LCD and 6-button keypad make these pilots safe and easy to use. Specifications Powerful and efficient drive unit housed in a waterproof case Easy-to-use controls Backlit LCD confirms current and locked heading, plus wind and navigational data when connected to a system Autotack Efficient, intelligent steering for optimum power conservation Manual and autoseastate, autotrim User adjustable settings and alarms Optional remote control and external compass Backlit LCD display of heading, locked course and navigational information User calibration for optimum performance WindTrim control in WindTrim mode Automatic compass deviation correction Northerly/Southerly heading compensation Automatic heading deadband - seastate control Automatic tack Waypoint advance feature Integral fluxgate compass Drive mechanism re-circulating ball drive Drive unit thrust torque 77 kg (170 lb) Helm speed (lock to lock) 4.5 seconds Interfaces SeaTalk and NMEA 0183 Input Maximum boat 4,500 kg (10,000 lb) Operating temperature 0øC to +70øC (32øF to 158øF) Power Consumption Standby: 40 mA (90 mA with full lighting) Auto: 0.5 A to 1.5 A depending on boat trim,helm load and sailing conditions Power supply 10 V to 15 V DC

Read more less

CAM300 Mini Day & Night Eyeball IP CameraThe CAM300 mini day/night IP camera is a wide field-of-view visible camera designed for Raymarine Axiom chartplotters. Equipped with an HD video sensor, the CAM300 transforms Axiom into a powerful onboard video observation system. Use the CAM300 to monitor blind spots, check in on the crew, or watch and record all fishing action from the helm. Combine the CAM300 with the Raymarine AR200 sensor and make smarter navigation decisions using ClearCruise augmented reality to overlay AIS targets, waypoints, and chart objects on the Axiom video display.Features: Crystal clear HD video imagery using a 3MP CMOS sensor View up to 4 CAM300 video streams simultaneously on singleAxiom display Built-in infrared emitters for excellent near-field low-light visibility up to 33 ft (10 meters) Image flip and invert functions for ball-up/ball-down installation and reverse video. Flexible mounting solutions as the entire camera ball rotates in the housing Easy to install with either a direct 12-volt connection or single cable Power over Ethernet (POE) Rugged IP66 enclosure for below and above-deck marine installations Navigate smarter with ClearCruise™ augmented reality and the optional AR200 sensor

Read more less

AR200 IP Camera Stabilization ModuleThe AR200 is an Augmented Reality Sensor consisting of a Global Navigation Satellite Systems (GNSS) Receiver and an Attitude and Heading Reference System (AHRS) sensor. The AR200 provides position, heading, pitch and roll data to compatible Axiom MFDs. When combined with a compatible IP camera the AR200 enables use of the ClearCruise™ Augmented Reality features available on your Axiom MFD.”Features: 9-axis AHRS (attitude and heading reference system) sensor 28-channel GPS receiver Fast 10Hz position updates Satellite differential GPS-compatible. Space-Based Augmentation System (SBAS) enabled with WASS, EGNOS, MSAS and GAGAN support When combined with a compatible IP camera the AR200 enables the use of ClearCruise Augmented reality features available on Axiom multifunction displays NMEA 2000 compliant IPX6 / IPX7 waterproof rating In the Box: Mounting trim (top) Small sealing ring AR200 x3 large bulkhead bracket fixings (pan head pozi DIN7981-ST 3.9x22 C Z A4 Stainless steel) Mounting tray (bottom) x4 small surface mount fixings (pan head pozi DIN7981-ST 2.9x13 C Z A4 Stainless steel) Bulkhead (wall) bracket Large sealing ring Documentation 6m (19.7ft) SeaTalkNG white cable

Read more less

Standard Forward Wind TransducerCompatible with: ST70* ST60+ ST290 i70 Standard Length: 14 1/2"Includes 100ft. Cable.*Using with ST70 requires purchase of ST70 Wind Pod, sold seperately. Specifications: Instrument Function: Wind Box Dimensions: 4"H x 11"W x 20"L WT: 5 lbs UPC: 723193220788

Read more less

Raymarine Element 9S Lighthouse, No ChartModel: E70533 Category-leading quad-core processor delivers fast chart redraw and responsive performance Fast and accurate 10hz GPS/GNSS sensor Rugged design and backed by Raymarine's three-year warranty (product registration required) Support for Raymarine LightHouseTM charts, Navionics, and C-MAP Safely navigate busy waterways with an optional QuantumTM wireless radar and AIS receiver Built-in High CHIRP sonar for depth and bottom contour imaging Map uncharted areas with Raymarine RealBathyTM personal sonar mapping Connect with NMEA2000 compatible AIS, autopilot, sailing instruments, engines, tanks, and VHF From sailing to power cruising to fi shing, the LightHouse Sport OS is easy to customize to your type of boating An oversized waypoint key for quick and easy marking of your favorite locations Three user-programmable quick keys to access your favorite pages with one button push Live menus let you customize charts while seeing the navigation display change in real time The Element S series of navigation displays gives you the freedom to enjoy the open waters. Select your destination and let Element's fast and accurate 10Hz GPS/GNSS lead the way. Engineered for simplicity and aff ordable performance, Element S will quickly become your trusted cruising companion. A quad-core processor offers responsive performance and Element's all-weather, sunlight viewable displays deliver chart and navigation data in beautiful color. Element's simple and straightforward LightHouse Sport operating system lets you navigate with confidence. Once underway, Element S will keep you on course with a smart list of user-friendly features, such as AIS target overlays, autopilot integration, and sailing instruments displays.SpecificationsDisplay Size9.0 Optically Bonded LCD Display Resolution 800 x 480 WVGA Display Type Non-Touch Brightness 1

Read more less

i70s Multifunction Instrument DisplayMaximum Visibility and Maximum VersatilityThe i70s multifunction gives you the flexibility to display instrument and navigation data that is most important to you. Equipped with a bold and bright 4.1_ display, the i70s is easy-to-customize with digital, analogue and graphical displays of depth, speed, wind and more. Add the i70s to your existing Raymarine instrument system or create a network of i70s displays and sensors, the choice is yours.Features: 4.1" super bright oversized LCD for maximum visibility All weather optically bonded display technology delivers brighter colors, sharper contrast, and a wide viewing angle Glass bridge industrial design compliments Raymarine eS and gS Series multifunction displays Simple user interface with sculpted rubber keypad for precise operation in all conditions Customizable data displays of depth, speed, wind and more SeaTalkng networking for seamless connectivity to Raymarine systems and NMEA2000* networks NMEA2000 connectivity* for engine, environment fuel and navigation data Convenient AIS repeater mode allows you to visually track nearby AIS targets Combine the i70s with the ITC-5 instrument transducer convertor and connect to analog depth, speed, and wind sensors Network the i70s with Airmar DST800 transducers and the new in-hull P70s smart transducer Supplied with both black (eS Series style) & (e Series style) gunmetal bezels and protective suncover *NMEA2000 certification pending. A DeviceNet to SeaTalknj adatop is required for connecting the i70s to NMEA2000 backbone.Intuitive LightHouse User InterfaceThe i70s places frequently used navigation functions right at your fingertips. The LightHouse instrument interface is consistent with Raymarine LightHouse multifunction displays, so Raymarine MFD users will feel right at home with the i70s.NetworkingRaymarine i70s allows for connectivity to the following on board networks: First generation SeaTalk networks using a SeaTalk to SeaTalkng adapter cable Current generation SeaTalkng networks NMEA2000 networks using a SeaTalkng to DeviceNet adaptor In addition to flexible networking capability the i70s features user-selectable data sources, for integration with multi-sensor networks. AIS RepeaterDisplay AIS targets from NMEA 2000 AIS receivers. View the closest 25 AIS-equipped vessels and select individual targets to obtain vessel information.Transducer ConnectivityPair i70s instruments with the innovative iTC-5 instrument transducer converter for seamless integration with analogue depth, wind, speed, compass and rudder transducer. Alternatively, you can network the i70s to DST800 and p79s Airmar smart tranducers.CustomizationThe Raymarine i70s instrument is easily customised to suit your personal boating requirements. From traditional analogue dials to engine information and tank levels, i70s has the capabilities to show it all. Specifications: Screen Size: 4.1" Shape: Square Instrument Function: Multifunction Box Dimensions: 3"H x 6"W x 9"L WT: 1.6 lbs UPC: 723193812297 Owner's Manual (pdf)

Read more less

Autopilot Control Unit (ACU) The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type.Drive Current OutputMaximum continuous 7 Amps at supply voltageDrive Clutch OutputNo clutch connectionConnections Rudder reference sensor Power Drive motor Ground Nominal supply voltage12 VOperating voltage range10.8V to 15.6V dcPower Consumption (standby) - Main Power Supply300 mA (12V)Power Consumption (standby) - SeaTalkng Power Supply No power supply to SeaTalkngSeaTalkng LEN (Load Equivalency Number)1SeaTalkng Power OutNo power supply to SeaTalkngData ConnectionsSeaTalkngInstallation Environment Operating Temperature: -20°C to +55°C (-4°F to +131°F) Storage Temperature: -30°C to +70°C (-22°F to +158°F) Relative Humidity: MAX 93% Waterproof rating Connector Panel: IPX2 Drive Electronics: IPX6 Dimensions (W x H x D)180mm x 140mm x 52mm (7.1 in x 5.5 in x 2.0 in)Weight0.6 kg (1.32lbs)Conformance Europe: 2004/108/EC Australia and New Zealand: C-Tick, Compliance Level 2 Specifications: Type: Parts Box Dimensions: 4"H x 8"W x 12"L WT: 2 lbs UPC: 723193768907

Read more less

Raymarine CAM300 Video CameraModel: E70660 View up to 4 CAM300 video streams simultaneously on single Axiom display 3MP CMOS sensor delivers up to 1080p resolution Ultra-compact size blends seamlessly with your vessel Built-in infrared emitters for excellent near-field low light visibility up to 33 ft (10 meters) Image flip and invert functions for ball-up/ball-down installation and reverse video system applications Easy to install with either direct 12-volt connection or single cable Power over Ethernet (POE Rugged IP66 enclosure for below and above deck marine installations The CAM300 mini day/night IP camera is a wide field-of-view visible camera designed for Raymarine Axiom chartplotters. Equipped with an HD video sensor, the CAM300 transforms Axiom into a powerful onboard video observation system. Use the CAM300 to monitor blind spots, check in on the crew, or watch and record all fishing action from the helm. Combine the CAM300 with the Raymarine AR200 sensor and make smarter navigation decisions using ClearCruise augmented reality to overlay AIS targets, waypoints and chart objects on the Axiom video display.SpecificationsNominal supply voltage12 V DC Operating voltage range 10.8 V DC to 15.6 V DC Power consumption 1 W Nominal @ 12 V DC / 1.8 W Maximum (LEDs ON) Power connection C power cable or POE (Power over Ethernet) ENVIRONMENTAL SPECIFICATION Operating temperature -30C to +60C (-22 degF to 140 degF) Waterproof rating IP66 PHYSICAL SPECIFICATION Dimensions Base diameter: 59.5 mm (2.34 in), Height: 52.9 mm (2.08 in) Weight 0.420 kg (0.926 lbs) VIDEO Video Processing H.264 Codec / Dual Stream Illumination 6 x 850nm Infrared - 10 meter range Frame Rate 25 fps Resolutions 2304 x 1296 (3MP) Max ONVIF Conformance Profile S Sensor / DSP 1/4 in CMOS Sensor Field of View 1.8mm Standard (160 deg HFOV x 130 deg VFOV) COMPATIBILITY Axiom display compatibilty Units running LightHouse 4.2 or later What's in the Box: CAM300 - includes an approximate 670 mm (2.2 ft) fitted cable, featuring an RJ45 (male) and power connector Mounting screws (3 x) Documentation Hex wrench (Allen key) Waterproof gasket

Read more less

Raymarine RVM-100 All-In-One Transom Mount TransducerModel: A80703 Transom Mount RealVision 3D 8-Meter Cable Raymarine's RVM-100 all-in-one transom mount transducer is designed for Raymarine RealVision MAX compatible sonar modules, and RealVision MAX equipped chartplotters. The RVM-100 lets you easily identify structures and locate fish with the life-like clarity of RealVision MAX technology. The RVM-100 is a 4-channel, Wide Spectrum CHIRP transducer with DownVisionTM, SideVisionTM, high-frequency CHIRP fish targeting, and 3D sonar inside. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes 3D sonar imagery, automatically compensating for vessel motion. You'll enjoy an accurate and life-like model of the underwater environment that filters out distortions caused by waves, swells, or vessel maneuvering. The RVM-100 also has a built-in fast-response water temperature sensor for quick, accurate readings.Raymarine's RVM-100 all-in-one transom mount transducer is designed for Raymarine RealVision MAX compatible sonar modules, and RealVision MAX equipped chartplotters. The RVM-100 lets you easily identify structures and locate fish with the life-like clarity of RealVision MAX technology. The RVM-100 is a 4-channel, Wide Spectrum CHIRP transducer with DownVisionTM, SideVisionTM, high-frequency CHIRP fish targeting, and 3D sonar inside. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes 3D sonar imagery, automatically compensating for vessel motion. You'll enjoy an accurate and life-like model of the underwater environment that filters out distortions caused by waves, swells, or vessel maneuvering. The RVM-100 also has a built-in fast-response water temperature sensor for quick, accurate readings.Raymarine's RVM-100 all-in-one transom mount transducer is designed for Raymarine RealVision MAX compatible sonar modules, and RealVision MAX equipped chartplotters. The RVM-100 lets you easily identify structures and locate fish with the life-like clarity of RealVision MAX technology. The RVM-100 is a 4-channel, Wide Spectrum CHIRP transducer with DownVisionTM, SideVisionTM, high-frequency CHIRP fish targeting, and 3D sonar inside. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes 3D sonar imagery, automatically compensating for vessel motion. You'll enjoy an accurate and life-like model of the underwater environment that filters out distortions caused by waves, swells, or vessel maneuvering. The RVM-100 also has a built-in fast-response water temperature sensor for quick, accurate readings.What's in the Box: Escutcheon plate Cable clips x5 9 x Self tapper screw (3.9x13) (4 x for escutcheon and 5 x for cable clips) 3 x Self tapper screw (4.2x18) (for transducer mounting bracket installation) Transducer mounting bracket Cable connector kit, consisting of: O Ring, Split ring x 2 (1 x spare), Locking collar, Split ring fitting tool Documentation M10 x 65 serrated bolt M10 serrated nylock nut Transducer (including 8 m / 26.2 ft cable)

Read more less

Wind transducer compatible with: ST70* ST60+ ST290 Standard length 14 1/2 in. Includes 100 ft cable. *Using with ST70 requires purchase of ST70 Wind Pod, sold separately.

Read more less

Raymarine CP100 CHIRP DownVisionTM Sonar Module Raymarine's new CP100 CHIRP DownVisionTM Sonar Module brings powerful sonar imaging capability to Raymarine's full line of networkable multifunction displays. Two sonars in one, the CP100 features Raymarine's CHIRP fish targeting as well as the photo-like CHIRP DownVisionTM sonar. The CP100 interfaces to the RayNet (Ethernet) network enabling the CP100 to be accessed from any Raymarine network display. Unlike conventional imaging sonars that transmit on a single frequency with each pulse, the CP100's DownVisionTM sonar uses CHIRP technology to transmit across a wide spectrum of sonar frequencies with each pulse ? the result is much higher-resolution, life-like sonar images. CP100's fish targeting channel features amazing resolution enabling it to easily separate individual baitfish in a school, and distinguish the bait from predator species. Best of all, the CHIRP fish targeting can be viewed simultaneously with CHIRP DownVisionTM for the ultimate view of what is underneath the water. The ultra-compact CP100 CHIRP DownVision Sonar Module is compatible with all Raymarine a-Series, c-Series, e-Series and gS-Series multifunction displays. The CP100 is available bundled with the CPT-100 transom mount transducer. The CP100 Sonar module only (no transducer included) can be paired with optional plastic or bronze thru hull transducers. Key CP100 Features: Photo-like imagery of bottom structure using CHIRP DownVisionTM. CHIRP powered dual channel sonar; view high resolution DownVision structure imagery and target fish with CHIRP sonar simultaneously. Perfectly matched transom mount and through hull CHIRP transducers available. Fast response temperature sensor built into the transducer. Maximum depth 600 feet for both channels. Simple RayNet Ethernet connection to Raymarine models for 2013 a, c, e and gS Series MFDs. Optional RayNet network cable required to complete installation: 2 meter Raynet cable part number A62361 5 meter RayNet cable, part number A80005 Raymarine CP100 Model Lineup: Description E70204 CP100 DownVision Module (no transducer included) E70205 CP100 DownVision Module with CPT-100 Transom Mount Transducer A80270 CPT-100 Transom Mount Transducer A80277 CPT-110 Plastic Through Hull Transducer A80271 CPT-120 Bronze Through Hull Transducer

Read more less

Raymarine i70s Multifunction Instrument DisplayModel: E70327 4.1 inch super bright oversized LCD for maximum visibility All weather optically bonded display technology delivers brighter colors, sharper contrast, and a wide viewing angle New glass bridge industrial design compliments Raymarine eS and gS Series multifunction displays Simple user interface with sculpted rubber keypad for precise operation in all conditions Customizable data displays of depth, speed, wind and more SeaTalkng networking for seamless connectivity to Raymarine systems and NMEA2000* networks NMEA2000 connectivity* for engine, environment fuel and navigation data Convenient AIS repeater mode allows you to visually track nearby AIS targets Combine the i70s with the ITC-5 instrument transducer convertor and connect to analog depth, speed, and wind sensors Network the i70s with Airmar DST800 transducers and the new in-hull P70s smart transducer The i70s multifunction gives you the flexibility to display instrument and navigation data that is most important to you. Equipped with a bold and bright 4.1 inch display the i70s is easy-to-customize with digital, analog and graphical displays of depth, speed, wind and more. Add the i70s to your existing Raymarine instrument system or create a network of i70s displays and sensors, the choice is yours.The i70s places frequently used navigation functions right at your fingertips. The LightHouse instrument interface is consistent with Raymarine LightHouse multifunction displays, so Raymarine MFD users will feel right at home with the i70s.Display AIS targets from NMEA 2000 AIS receivers. View the closest 25 AIS-equipped vessels and select individual targets to obtain vessel information.Pair i70s instruments with the innovative iTC-5 instrument transducer converter for seamless integration with analog depth, wind, speed, compass and rudder transducer. Alternatively, you can network the i70s to DST800 and p79s Airmar smart tranducers.The Raymarine i70s instrument is easily customized to suit your personal boating requirements. From traditional analog dials to engine information and tank levels, i70s has the capabilities to show it allRaymarine i70s allows for connectivity to the following on board networks: First generation SeaTalk networks using a SeaTalk to SeaTalkng adapter cable Current generation SeaTalkng networks NMEA2000 networks using a SeaTalkng to DeviceNet adaptor In addition to flexible networking capability the i70s features user-selectable data sources, for integration with multi-sensor networks.SpecificationsVoltage9 to 16 V dc Power consumption 1.7 Watts Mounting method Surface LCD brightness 1,200cd/m2 Display 4.1 TFT LCD 16 bit color

Read more less

Ray63 Dual Station VHF Radio with GPSRaymarine’s Ray63 radio comes with oversized controls and a big screen for easy operation offshore.  Ray63 is a full-function VHF marine radio with Class D Digital Selective Calling (DSC) and a built-in GPS receiver.  Simply program your boat’s MMSI number into the Ray63 and immediately benefit from the enhanced calling and safety features of DSC.  The Ray63 supports both NMEA2000 and legacy NMEA0183 networking which enables it to connect with other onboard electronics.  Ray63 also supports the connection of an optional remote speaker (A80542) to provide audio at a second location.Ray63 also supports dual control stations with the addition of the optional RayMic second station kit.  With an oversized LCD and simple controls, the RayMic is a compact all-in-one handset that fits easily on any secondary helm, tower or navigation station. Use RayMic for station-to-station intercom capability too. Ray63 was designed to comply with the latest international regulations and includes a connection point for an optional GPS/GNSS antenna.  The optional antenna improves the GPS reception when the radio is mounted below deck, in an enclosed pilothouse, or inside a metal enclosure.Ray63 features an attractive industrial design that complements Raymarine’s Axiom family multifunction displays.  The radio includes both a standard trunnion mounting kit as well as surface mounting hardware.Features: Full-sized marine VHF with Digital Selective Calling Optional RayMic second station kit for full remote control Built-in GPS/GNSS receiver with an optional external antenna connection Surface and trunnion mount kits included Compliments the style and design of Axiom multifunction displays Specifications: AIS: No Built-In GPS: Yes NMEA 2000: Yes Remote Mic Capable: Yes Scrambler Capable: No Box Dimensions: 7"H x 9"W x 11"L WT: 6.1 lbs UPC: 723193826478 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

i60 SeaTalkng Instruments - WindThe all-new i60 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i60 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. i60 Analog Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match with our instruments and multifunction displays.For the ultimate in flexibility the i60 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed and wind transducers directly to respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of i60 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately.i60 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i60 Instruments are waterproof to IPX6 standards. The i60 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase.i60 Wind Instrument Full featured wind display for cruising and racing sailboats. The i60 Wind features an easy-to-read analog dial, nighttime red backlighting and high-contrast text and graphics. Compatible with Raymarine's masthead transducer (recommend for sailboats) or the Rotavecta transducer (recommended for powerboats) Displays wind speed, direction, Beaufort, max wind speed, VMG, and tack Alarms for high and low apparent wind angle, low true wind speed, and maximum true wind speed. Apparent wind display and True wind when integrated with a compass or autopilot, and speed instrument i60 Key Features Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems. Large, crisp LCD displays with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70 and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy Specifications: Shape: Square Instrument Function: Wind Box Dimensions: 4"H x 7"W x 10"L WT: 1.8 lbs UPC: 723193762851 Owner's Manual (pdf)

Read more less

i50 SeaTalkng Instruments - Tridata The i50 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i50 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. i50 Digital Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match with our instruments and multifunction displays.For the ultimate in flexibility the i50 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed and wind transducers directly to respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of i50 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately.i50 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i50 Instruments are waterproof to IPX6 standards. The i50 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase.i50 Tridata Instrument The i50 Tridata is a convenient 3-line instrument that combines the functions of the Speed and Depth Instruments into one display. This makes the i50 Tridata ideal for installations on helms where space is a premium, or as a depth and speed repeater solution for other locations on the boat. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 connectivity for maximum flexibility Use a primary display or as repeater of i50 depth and speed instruments Built-in depth and speed transducer connections The i50 Tridata's 3-line LCD display can show current depth, current speed, distance log, trip log and water temperature. Additional display modes include maximum speed, average speed, and VMG to windward. For racers, Tridats has a count-up timer, and 2 race start timers. Tridata's robust alarm functions include a shallow depth alarm, deep depth alarm, shallow anchor alarm and deep anchor alarm. i50 Key Features Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems. Large, crisp LCD displays with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70 and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy Specifications: Shape: Square Instrument Function: Multifunction Digital/Analog: Digital Box Dimensions: 4"H x 7"W x 10"L WT: 2 lbs UPC: 723193730737 Owner's Manual (pdf)

Read more less

Raymarine i50 Speed Pack with ST900/P120 Retractable Thru-HullModel: T70583 Oversized digits for easy viewing by day or night Red backlighting enhances night visibility SeaTalk NG, NMEA2000 and SeaTalk network compatible Built-in speed/temperature transducer interface Compact footprint Low power consumption Surface mount or optional trunnion mount kit The i50 Speed instrument display is designed for easy viewing of your boat's speed through the water or speed over ground. The i50 Speed instrument can also display trip and log data as well as water temperature. Ideal for use on RIBs, powerboats, and small yachts, the compact yet surprisingly powerful SeaTalk i40 Depth instrument display can be easily seen, even when the lighting conditions are low thanks to its oversized digits and extra-sharp LCDs.All i50 instruments are designed to fully integrate with Raymarine's autopilots and other navigation equipment. Each i50 instrument can be configured as a Master display, hosting its own transducer, or as a Repeater display, showing information from another source on the network. I50 instruments are SeaTalkng network-ready and can be easily adapted to connect to NMEA2000 or older SeaTalk networks.SpecificationsDimensionsWidth: 110 mm (4.22 in), Height: 115 mm (4.52 in), Depth: 44 mm (1.7 in) Connections 2 x SeaTalkng connections (compliant with SeaTalk), Transducer connections ENVIRONMENTAL Relative humidity Max. 93% Waterproof rating IPx6 Storage temperature -30 degC to +70 degC (-22 degF to 158 degF) Operating temperature -20 degC to +55 degC (-13 degF to 131 degF) POWER Current (typical / max) 45-65 mA (display only) / 200 mA maximum (transducer connected)c Nominal supply voltage 12 V dc Operating voltage range 10 V dc to 16 V dc Power consumption < 1 W typical (display only), 2.4 W maximum (transducer connected) LEN (NMEA 2000 Load Equivalency Number) 4 What's in the Box: i50 Instrument display Suncover (to match i70s, p70s, p70Rs, eS Series) Front bezel (to match i70s, p70s, p70Rs, eS Series) Gasket Suncover (to match a, c, e Series) Front bezel (to match a, c, e Series) 400mm (15.7 in) SeaTalkng spur cable SeaTalkng blanking plug Fixing screws x4 Documentation ST900/P120 Speed/Temp transducer

Read more less

Raymarine Evolution ACU Specifications Model ACU-100 ACU-200 ACU-300 ACU-400 E70098 E70099 E70139 E70100 Drive Current Output Maximum continuous 7 A at supply voltage Maximum continuous 15 A at supply voltage Maximum continuous 5 A at supply voltage Maximum continuous 30 A at supply voltage Drive Clutch Output No clutch connection Up to 2.0 A continuous, selectable between 12 /24 V No clutch connection Up to 4 A continuous at 12 V on 12 V systems, Up to 4 A continuous at 24 V on 24 V systems, Up to 4 A continuous at 12 V on 24 V systems Connections Rudder reference sensor Power Drive motor Ground Rudder reference sensor Sleep switch Power Drive motor Drive clutch Ground Rudder reference sensor Sleep switch Power Solenoid drive out / return Ground Rudder reference sensor Sleep switch Power Drive motor Drive clutch 723193767962 Ground Digital Input / Output (DIO) Nominal supply voltage 12 V 12 V or 24 V Operating voltage range 10.8 V to 15.6 V dc 10.8 V to 31.2 V dc Power consumption (standby) - main power supply 300 mA (12V) 300 mA (12/24 V) Power consumption (standby) - SeaTalkng power supply No power supply to SeaTalkng&nbs p; 20 mA (12V) SeaTalkng LEN (Load Equivalency Number) 1 SeaTalkng Power out No power supply to SeaTalkng 3 A at 12 V (fuse protected at 3 A) Data connections SeaTalkng Installation environment Operating temperature: -20 degC to +55 degC (-4 degF to +131 degF) Storage temperature: -30 degC to +70 degC (-22 degF to +158 degF) Relative humidity: max 93% Waterproof rating Connector panel: IPX2 Drive electronics: IPX6 Drip resistant Dimensions (W x H x D) 180 mm x 140 mm x 52 mm (7.1 in x 5.5 in x 2.0 in) 285 mm x 211.5 mm x 64.5 mm (11.2 in x 8.3 in x 2.5 in) Weight 0.6 kg (1.32 lbs) 2.2kg (4.84 lbs) Conformance Europe: 2004/108/EC Australia and New Zealand: C-Tick, Compliance Level 2

Read more less

ST1000 Plus Tiller PilotST1000 Plus tiller autopilot for tiller steered sailing vessels up to 6,600 lbs (3,000 kg)*Note: Always take the fully laden displacement weight of the vessel into account; this is often 20% above the designed displacement.Includes: Instruction Manual Plus Tiller Pilot 12V Socket Tiller Pin  Mounting Socket  Specifications: Steering Type: Tiller Box Dimensions: 5"H x 7"W x 21"L WT: 5 lbs UPC: 023193100098 Quick Guide (pdf)

Read more less

Raymarine AR200 StabilizationModule for Augmented RealityModel: E70537 9-axis AHRS (attitude and heading reference system) sensor 28-channel GPS receiver Fast 10Hz position updates Satellite differential GPS-compatible. Space-Based Augmentation System (SBAS) enabled with WASS, EGNOS, MSAS and GAGAN support When combined with a compatible IP camera the AR200 enables the use of ClearCruise Augmented reality features available on Axiom multifunction displays NMEA 2000 compliant IPX6 / IPX7 waterproof rating The AR200 is an Augmented Reality Sensor consisting of a Global Navigation Satellite Systems (GNSS) Receiver and an Attitude and Heading Reference System (AHRS) sensor. The AR200 provides position, heading, pitch and roll data to compatible Axiom MFDs. When combined with a compatible IP camera the AR200 enables use of the ClearCruiseTM Augmented Reality features available on your Axiom MFD.SpecificationsNominal supply voltage12 V dc (Supplied by the SeaTalkng(R) network.) Operating voltage range 9 V dc to 16 V dc (protected up to 32 V dc) Power consumption 30 mA Max. LEN (Load Equivalency Rating) 1 ENVIRONMENTAL Operating temperature range -25 oC to +55 oC (-13 oF to 131 oF) Storage temperature range -25 oC to +70 oC (-13 oF to 158 oF) Relative humidity 93% Water Ingress Protection IPx6 and IPx7 CONFORMANCE EMC Directive 2014/30/EU Australia and New Zealand C-Tick compliance Level 2 RoHS Directive 2011/65/EU WEEE Directive 2012/19/EU GNSS RECEIVER Signal acquisition Automatic Channels Simultaneously track up to 28 satellites. Operating frequency 1574 MHz to 1605 MHz Update rate 10Hz Sensitivity Cold start = -147 dBm Re-acquisition = -160 dBm Tracking = -164 dBm GNSS compatibility GPS GLONASS Galileo ready Beidou ready Satellite Differential Type (SBAS) WAAS (United States) EGNOS (Europe) MSAS (Japan) GAGAN (India) QZSS ready (Japan) Differential acquisition Automatic Position accuracy without SBAS (95%) < 15m Position accuracy with SBAS (95%) <5m Speed accuracy (95%) <0.3m Time to first fix from cold start <2 minutes (<60 seconds typical) Time to first fix from hot start <45 seconds Geodetic Datum WGS-84 Antenna Internal AHRS AHRS 3-Axis digital accelerometer 3-Axis digital compass 3-Axis MEMS Gyro digital angular rate sensor Magnetic compass accuracy Static = ?1 deg RMS Dynamic = ?3 deg RMS Pitch, Roll and Yaw accuracy ?1 deg Heading, Pitch, Roll and Rate of Turn update rate 10Hz What's in the Box: Mounting trim (top) Small sealing ring AR200 x3 large bulkhead bracket fixings (pan head pozi DIN7981-ST 3.9x22 C Z A4 Stainless steel) Mounting tray (bottom) x4 small surface mount fixings (pan head pozi DIN7981-ST 2.9x13 C Z A4 Stainless steel) Bulkhead (wall) bracket Large sealing ring Documentation 6m (19.7ft) SeaTalkNG white cable

Read more less

Longer stem for hulls with steep deadrise or thicker cored hulls. Compatible with the following sounder modules: DSM30 DSM300 Compatible hull material: wood and fiberglass Max Power: 600 watts Frequency: 200/50 kHz Cable: 30ft (10m) cable with connector Hole diameter for installation: 2 in Other: Self-sealing removable paddle wheel insert. High speed fairing block is included.

Read more less

Ray90 Wired Second Station Kit with Passive Speaker, RayMic Wired Handset & RayMic Extension Cable - 10MModular Dual-Station VHF Radio SystemRaymarine’s fixed mount Ray90 modular VHF radio brings multi-station communications to a whole new level of power, performance, and flexibility. The Ray90 is a black-box design with a transceiver that hides out of sight while the ergonomic RayMic handset and remote speaker provide full control of the radio with crystal clear audio. Features: Black box, multi-station capable VHF radio Expandable to 2 handsets Built-in loudhailer and fog signal generator Optional external GPS Simple NMEA2000 and NMEA0183 Networking Ray90 is equipped with a powerful 25-watt transmitter and commercial grade electronics for long life and superior performance. Channel scanning, dual-watch, tri-watch and weather alert are standard. Class D Digital Selective Calling radio and integrated GPS makes setting up the advanced safety and calling features easy. Simply input your vessel’s MMSI number during setup and you’re ready to go. For GPS operation the optional GA150 passive GPS antenna is required.Position TrackingUse Ray90’s position tracking feature to keep tabs on up to 5 nearby DSC equipped vessels. Their positions are automatically shared with your Raymarine MFD. Keep an eye on other boats in your cruising party, monitor vessels of interest, or manage your local fleet. In Europe the Ray90 supports the ATIS system on navigable inland waterways.LoudhailerRay90’s built-in loudhailer will make you heard on-deck and across the harbour. Connect an optional hailing horn and make your presence known with 30-watts of audio output, plus 2-way talkback. When things get foggy, the loudhailer can also be set to automatically sound required fog signals for power and sailing vessels underway and at anchor.Waterproof & RuggedizedRay90’s transceiver unit is cast in solid aluminum for shock and vibration resistance and maximum heat dissipation. RayMic handsets feature super-bright backlighting for easy viewing in all conditions and oversized keys provide a sure grip with easy access to commonly used functions.Expand Your SystemThe Ray90 system includes 1 RayMic wired handset and a passive speaker kit. Expand your system with an additional RayMic handset and remote speaker. For noisy environments choose the optional active remote speaker. No matter how small or how large your vessel is, the Ray90 all the power and performance you need for essential communications on the water. Specifications: Type: Microphones Box Dimensions: 7"H x 13"W x 19"L WT: 5.5 lbs UPC: 723193826751

Read more less

Raymarine RAY63 VHF RadioModel: E70516 Full-sized marine VHF with Digital Selective Calling Wired or wireless expansion with optional RayMic handset stations Built-in GPS/GNSS receiver with connection point for optional external antenna NMEA2000 and NMEA0183 networking for integration with onboard systems Audio output connection for optional passive remote speaker (A80542) Surface and trunnion mount kits included Styled to compliment the Axiom family of multifunction displays Raymarine's Ray63 radio comes with oversized controls and a big screen for easy operation offshore. Ray63 is a full-function VHF marine radio with Class D Digital Selective Calling (DSC) and a built-in GPS receiver. The Ray63 also supports 1 wired or 2 wireless RayMic controllers for true multi-station control and intercom capability.SpecificationsOperating Temperature-20oC (-4oF) to +60oC (140oF) Storage Temperature -25oC (-13oF) to +70oC (158oF) Relative Humidity 95% Water Proofing IPx6 & IPx7 Connections 1x NMEA 0183, 1x SeaTalkng (R) / NMEA 2000 , 1x Front Fistmic connection , 1x Rear connection for 2nd station , 1x Audio (RCA) , 1x GNSS (GPS) antenna (TNC), 1x VHF Asntenna (SO-239) Channels All available US, International and Canadian VHF marine bands Power Nominal Supply Voltage 12 V dc (Reverse polarity and over voltage protection) Operating Voltage Range 9 Vdc to 16 Vdc Current Consumption Less than 6 A at high power (13.6 V) Standby: 600 mA Receive: 2 A Transmitter Channels All available US, International and Canadian VHF marine bands Frequency Range 156.000 MHz to 157.425 MHz / 155.500 MHz to 161.425 MHz (Private channels) Frequency Stability +/- 1.5 ppm Channel Spacing 12.5 kHz Power Output Low power setting - 1 W - High power setting - 25 W Antenna Impedance 50 Ohms (typical) Receiver Receiver Type Double conversion super heterodyne Channels All available US, International and Canadian VHF marine bands Sensitivity Better than 1 microvolt EMF @20dB SINAD Squelch Sensitivity Less than -2 dBμ EMF Hum and Noise Better than -40 dB Audio Distortion Less than 10% Speaker Base Station Speaker Power Output 2.5W (8 Ohms) Fistmic Speaker Power 1W (16 Ohms) External Speaker Power 5W (8 Ohms) Handset Speaker Power Output 1W (16 Ohms) GNSS (GPS) Channels 72 Cold Start < 2 minutes Receiver IC Sensitivity -167 dBm (Tracking) / -148 dBm (Acquisition) SBAS Compatibility WAAS, EGNOS, MSAS Special Features Active Jamming and Interference Reduction Signal Acquisition Automatic Almanac Update Automatic Geodetic Datum WGS-84 (alternatives available through Raymarine MFD) Refresh Rate 10 Hz (10 times per second Concurrent GNSS) Position Accuracy Without SBAS: <= 15 metres 95% of the time, With SBAS: <= 5 metres 95% of the time What's in the Box: Ray63 VHF DSC Radio Sun cover Panel mount gasket Fistmic Mounting bracket (Trunnion) Mounting bracket knobs Fistmic hook plate Documentation Protective antenna boot SeaTalkng (R) blanking plug SeaTalkng (R) 400 mm (15.7 in.) spur cable 4x M4 nuts, spring washers and M4x25 machine screws (For Panel mounting) 4x M4x25 screws (For Bracket (Trunnion) mounting) 2x M4x12 screws (For Fistmic hook plate mounting).

Read more less

Raymarine i60 Instrument Displays Stylish displays for sailboaters! The new i60 instruments are designed to complement the all new Raymarine cSeries and eSeries multifunctional displays. Designed specifically for sailboaters, these stylish, dedicated-function instruments cover wind and close-hauled wind options in analogue and digital formats. Excellent viewing angles for both day and night conditions and simple, push-button controls make i60 instruments extremely easy to see and use. They are also simple to install thanks to the front-mount design. Features Large analogue dials Red backlighting for improved visibility SeaTalk and SeaTalkng interfaces NMEA2000 (compatible) interface Built-in transducer interface 110mm x 115mm footprint identical to older Raymarine ST60+ instrumentation Large controls for ease of use at sea Low power consumption Multiple data source support eliminates potential data conflicts Front mounted design for simple installation Raymarine i60 Instrument Displays Raymarine i60 Wind Instrument Display Analogue and digital data Calculates apparent (relative) and true wind speed/angle (true wind requires SeaTalk speed through water data) Raymarine i60 Close Hauled Wind Instrument Display Magnified 20 deg - 60 deg display The perfect instrument when a single degree can make all the difference i60 Wind i60 Close Haul Wind E70061 E70062 12V DC Operating Voltage Range 10 - 16V DC Power Consumption typically <1W (display only) and 2.4W maximum with transducer connected Current Consumption 45 to 65mA (display only) and 200mA maximum with transducer connected Operating Temperature Range -20 degC to +55 degC Storage Temperature -30 degC to +70 degC Relative Humidity up to 93% Waterproofing Standard IPX6 Connections 2 x SeaTalkng and transducers Conformance Europe 2004/108/EC

Read more less

Invented by Autohelm in 1973, tiller pilots have consistently been the world's most popular pilot ever since, setting the standard for performance, reliability and ease of use. Advanced features are standard. AutoTack lets you handle the sheets, while the pilot tacks the boat and AutoSeastate intelligently keeps the boat on course while conserving power. Whether used as a stand-alone pilot or with a SeaTalk/NMEA GPS, the clear backlit LCD and 6-button keypad make these pilots safe and easy to use. Specifications Powerful and efficient drive unit housed in a waterproof case Easy-to-use controls Backlit LCD confirms current and locked heading, plus wind and navigational data when connected to a system Autotack Efficient, intelligent steering for optimum power conservation Manual and autoseastate, autotrim User adjustable settings and alarms Optional remote control and external compass Backlit LCD display of heading, locked course and navigational information User calibration for optimum performance WindTrim control in WindTrim mode Automatic compass deviation correction Northerly/Southerly heading compensation Automatic heading deadband - seastate control Automatic tack Waypoint advance feature Integral fluxgate compass Drive mechanism lead-screw and nut drive Drive unit thrust torque 57 kg (125 lb) Helm speed (lock to lock) 8 seconds Interfaces SeaTalk and NMEA 0183 Input Maximum boat 3 000 kg (6 600 lb) Operating temperature 0øC to +70øC (32øF to 158øF) Power Consumption Standby: 40 mA (90 mA with full lighting) Auto: 0.5 A to 1.5 A depending on boat trim, helm load and sailing conditions Power supply 10 V to 15 V DC

Read more less

i50 SeaTalkng Instruments - Depth w/Nylon Thru-Hull TransducerThe all-new i50 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i50 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. i50 Digital Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match with our instruments and multifunction displays.For the ultimate in flexibility the i50 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed and wind transducers directly to respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of i50 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately.i50 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i50 Instruments are waterproof to IPX6 standards. The i50 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase.i50 Depth Instrument The i50 Depth Instrument offers accurate and reliable displays of depth, max depth and minimum depth. Shallow and deep depth alarms will keep you alert, along with a shallow and deep anchor alarms. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 connectivity for maximum flexibility Connect additional i50 depth displays Built-in depth transducer connection i50 Key Features Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems. Large, crisp LCD displays with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70 and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy Specifications: Transducer Type: Thru-Hull Shape: Square Instrument Function: Depth Box Dimensions: 4"H x 10"W x 14"L WT: 4.75 lbs UPC: 723193854259 Owner's Manual (pdf)

Read more less

i50 SeaTalkng Instruments - DepthThe all-new i50 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i50 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. i50 Digital Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match with our instruments and multifunction displays.For the ultimate in flexibility the i50 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed and wind transducers directly to respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of i50 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately.i50 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i50 Instruments are waterproof to IPX6 standards. The i50 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase.i50 Depth Instrument The i50 Depth Instrument offers accurate and reliable displays of depth, max depth and minimum depth. Shallow and deep depth alarms will keep you alert, along with a shallow and deep anchor alarms. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 connectivity for maximum flexibility Connect additional i50 depth displays Built-in depth transducer connection i50 Key Features Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems. Large, crisp LCD displays with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70 and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy Specifications: Shape: Square Transducer Type: Not Included Instrument Function: Depth Box Dimensions: 4"H x 7"W x 10"L WT: 2.15 lbs UPC: 723193730720 Owner's Manual (pdf)

Read more less

Raymarine T106 Micronet RemoteDisplay Starter SystemModel: T106You need instant access to accurate data and displays that are absolutely reliable. Raymarine Wireless instruments display all the data you'll need and there are no wires running through your hull or down your mast.Besides giving you versatility, Raymarine Wireless displays are unique. They are wireless, solar powered and use Micronet technology.A typical installation can be done in just a few hours, with your rig in place and your boat still in the water. And there's no need for holes in the bulkhead or wires down the mast.Raymarine Wireless displays are solar powered with integrated lithium batteries that power the unit for life. Power consumption is so efficient that units can run autonomously for up to 300 hours.The elimination of wires in the mast not only reduces spar weight but also lowers the boat's centre of gravity, giving significant and immediate performance advantage.Using clip-in cradles, your display can be placed anywhere on your boat, allowing you to view the information where and when you need it.All Raymarine Wireless products are sealed for life and completely waterproof (submersible to 10m). This also means no condensation.SpecificationsIncludes parts:T113 Multifunctional wireless remote display

Read more less

Raymarine i50 Depth DisplayModel: E70059 Oversized digits for easy viewing by day or night Red backlighting enhances night visibility SeaTalkng, NMEA2000 and SeaTalk network compatible Built-in depth transducer interface Compact footprint Low power consumption Surface mount or optional trunnion mount kit The i50 Depth displays minimum and maximum depth with audible shallow, anchor and deep water alarms. Extra large digits and a simple keypad control make the i50 easy and quick to use.The i50 Depth instrument display reveals real-time water depth along with audible and visible alerts for shallow water. It also tracks maximum and minimum depth as well as the depth trend. With large digits and audible alarms for deep, anchor, and shallow water, this display works perfectly for sail boats, power boats, yachts, and RIBs. The i50 Depth instrument is engineered for easy viewing. Its high-contrast LCD, oversized digits, and red backlighting combine to deliver superior visibility under all conditions. i50 instruments also support local and group dimming control. This makes it easy to adjust the brightness of multiple Raymarine products all at once. Simple push button controls provide easy access to all its data displays. I50 series instruments are the perfect combination of powerful performance, easy operation and rugged reliability.SpecificationsDimensionsWidth: 110 mm (4.22 in), Height: 115 mm (4.52 in), Depth: 44 mm (1.7 in) Connections 2 x SeaTalkng connections (compliant with SeaTalk), Transducer connections Environmental Relative humidity Max. 93% Waterproof rating IPx6 Storage temperature -30 degC to +70 degC (-22 degF to 158 degF) Operating temperature -20 degC to +55 degC (-13 degF to 131 degF) Conformance Standards Europe 2004/108/EC Power Current (typical / max) 45-65 mA (display only) / 200 mA maximum (transducer connected) Nominal supply voltage 12 V dc Operating voltage range 10 V dc to 16 V dc Power consumption 1 W typical (display only), 2.4 W maximum (transducer connected) LEN (NMEA 2000 Load Equivalency Number) 4 What's in the Box: i50 Instrument display Suncover (to match i70s, p70s, p70Rs, eS Series) Front bezel (to match i70s, p70s, p70Rs, eS Series) Gasket Suncover (to match a, c, e Series) Front bezel (to match a, c, e Series) 400mm (15.7 in) SeaTalk spur cable SeaTalk blanking plug Fixing screws x4 Documentation

Read more less

Raymarine i50 Depth System With Thru Hull TransducerModel: E70148 Oversized digits for easy viewing by day or night Red backlighting enhances night visibility SeaTalk, NMEA2000 and SeaTalk network compatible Built-in depth transducer interface Compact footprint Low power consumption Surface mount or optional trunnion mount kit The i50 Depth displays minimum and maximum depth with audible shallow, anchor and deep water alarms. Extra large digits and a simple keypad control make the i50 easy and quick to use.The i50 Depth instrument display reveals real-time water depth along with audible and visible alerts for shallow water. It also tracks maximum and minimum depth as well as the depth trend. With large digits and audible alarms for deep, anchor, and shallow water, this display works perfectly for sail boats, power boats, yachts, and RIBs. The i50 Depth instrument is engineered for easy viewing. Its high-contrast LCD, oversized digits, and red backlighting combine to deliver superior visibility under all conditions. i50 instruments also support local and group dimming control. This makes it easy to adjust the brightness of multiple Raymarine products all at once. Simple push button controls provide easy access to all its data displays. I50 series instruments are the perfect combination of powerful performance, easy operation and rugged reliability.SpecificationsDimensionsWidth: 110 mm (4.22 in), Height: 115 mm (4.52 in), Depth: 44 mm (1.7 in) Connections 2 x SeaTalk connections (compliant with SeaTalk), Transducer connections Environmental Relative humidity Max. 93% Waterproof rating IPx6 Storage temperature -30 degC to +70 degC (-22 degF to 158 degF) Operating temperature -20 degC to +55 degC (-13 degF to 131 degF) Conformance Standards Europe 2004/108/EC Power Current (typical / max) 45-65 mA (display only) / 200 mA maximum (transducer connected) Nominal supply voltage 12 V dc Operating voltage range 10 V dc to 16 V dc Power consumption 1 W typical (display only), 2.4 W maximum (transducer connected) LEN (NMEA 2000 Load Equivalency Number) 4 What's in the Box: i50 Instrument display P319 Depth through hull transducer Suncover (to match i70s, p70s, p70Rs, eS Series) Front bezel (to match i70s, p70s, p70Rs, eS Series) Gasket Suncover (to match a, c, e Series) Front bezel (to match a, c, e Series) 400mm (15.7 in) SeaTalk spur cable SeaTalk blanking plug Fixing screws x4 Documentation

Read more less

Verado Hydraulic Hose KitThe Verado Hydraulic Hose Kit is a kit specifically designed for installing a SmartPilot Autopilot System on Mercury Verado Engines.

Read more less

SR200 InfoLINK SiriusXM Receiver for MFDsThe Raymarine SR200 InfoLINK receiver brings subscription-based SiriusXM Marine weather and satellite radio to your Raymarine LightHouse 3 multifunction displays. SiriusXM Marine is graphical weather and fishing information for boaters.  Essential information like weather radar, NEXRAD storm cell tracking, tropical storm tracks, and localized forecasts are all easily viewable inside the LightHouse 3 chart application.  Fishermen can enjoy expanded information including high-resolution coastal and offshore sea surface temperature overlays, also displayed on the live navigation chart. The SR200 InfoLINK receiver can also provide access to over 150 channels of SiriusXM Satellite Radio programming including commercial-free music, sports, talk, entertainment, politics, comedy, religion, news, and much more.  The SR200 features an analog line output connection that you can easily connect to the auxiliary input on most marine stereo systems.  SiriusXM channel selection presets and controls are accessed from Raymarine’s LightHouse 3 SiriusXM app.Super-compact and simple to install, the SR200 connects to the RayNet high-speed Ethernet network and seamlessly delivers content to all your multifunction displays.  A low-profile Shakespeare SRA-50 SiriusXM Marine antenna kit is included.  The antenna can be mounted on any horizontal surface with a clear view of the sky or pole mounted with the included threaded adapter. SiriusXM Marine service is available in the continental United States, southern Canada, and coastal waters.  The SR200 InfoLINK receiver requires a valid activation and subscription to SiriusXM Marine Weather and/or SiriusXM Satellite radio, sold separately.  Please visit www.siriusxm.com/marine for full details on features, packages, pricing, and the most up-to-date satellite coverage map.Features: Delivers SiriusXM weather and audio content to Raymarine LightHouse 3 Multifunction Display Systems Receive up-to-the-minute weather forecasts, alerts, weather radar, sea surface temperature charts, and more Access 150+ channels of SiriusXM Satellite Radio Compatible With: Axiom Axiom Pro Axiom XL **Requires LightHouse 3.9 or newer software** Weather Subscription Options:SiriusXM Marine Weather - Marine Offshore and Coastal PackagesAudio Subscription Options:SiriusXM Channel Line-UpWhat’s in the Box? SR200 InfoLINK SiriusXM Receiver Shakespeare SRA-50 SiriusXM Antenna with pole and surface mounting kits SRA-50 interconnect cable (25 feet) SR200 InfoLINK to RayNet Interface cable (2 meters) Analog stereo (L/R) line output cable (2 meters) Power Cable (2 meters) Mounting hardware Installation guide and documentation kit

Read more less

12v solenoid valve.

Read more less

Ray53 Compact VHF Radio with GPSRaymarine’s Ray53 radio is small in size but big on features and performance. Ray53 is a full-function VHF marine radio with Class D Digital Selective Calling (DSC) and a built-in GPS receiver. Simply program your boat’s MMSI number into the Ray53 and immediately benefit from the enhanced calling and safety features of DSC. The Ray53 supports both NMEA2000 and legacy NMEA0183 networking which enables it to connect with other onboard electronics. Ray53 also supports the connection of an optional remote speaker (A80542) to provide audio at a second location.Ray53 was designed to comply with the latest international regulations and includes a connection point for an optional GPS/GNSS antenna.  The optional antenna improves the GPS reception when the radio is mounted below deck, in an enclosed pilothouse, or inside a metal enclosure.Ray53 features an attractive industrial design that complements Raymarine’s Axiom family multifunction displays.  The radio includes both a standard trunnion mounting kit as well as surface mounting hardware.  Features: Compact marine VHF with Digital Selective Calling Built-in GPS/GNSS receiver with the optionalexternal antenna connection Surface and trunnion mount kits included Compliments the style and design of Axiom multifunction displays Specifications: AIS: No Built-In GPS: Yes Hailer: No NMEA 2000: Yes Remote Mic Capable: No Scrambler Capable: No Box Dimensions: 4"H x 9"W x 12"L WT: 5 lbs UPC: 723193826928 Owner's Manual (pdf)

Read more less

P79S Smart™ Sensor with SeaTalkNG Adapter with A80373 & A06045The P79S brings depth intelligence to your boat. Featuring Airmar’s Smart™ Sensor technology, the P79S delivers processed depth data right to the onboard network for multiple displays to use.The P79S includes a plastic mounting base that is aligned to the centerline and secured inside the hull. Then it is filled with non-toxic antifreeze. The transducer is inserted into the base and adjusted for the proper deadrise offset, ensuring the beam will be shooting straight down for maximum echo returns. The antifreeze provides the best medium to transmit through solid fiberglass and into the surrounding water. The major benefit of an in-hull transducer is no protruding features on the exterior of the hull, making it the perfect choice for trailered or lifted boats. Designed for smaller boats up to 8 m (25') with a solid fiberglass hull.Airmar's Smart Sensors have embedded microelectronics—the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth data is a single cable into a compatible network or display. Available as an analog sensor or a digital Smart Sensor that can output in the NMEA 0183 or NMEA 2000® format.Features: Depth only 60 W 235 kHz frequency prevents mutual interference with other echo sounders on the vessel 7° beamwidth Depth range: NMEA 0183 model has a maximum depth of 100 m (330') NMEA 2000 model has a maximum depth of 150 m (500') Installed with a hand-adjustable base. No cutting is needed. NMEA 2000 certified cable assembly No holes to drill In-hull installation can be done while the boat is in the water Urethane transducer with adjustable, plastic, mounting base Available in NMEA 0183 or NMEA 2000 standard NMEA 2000 certified or NMEA 0183 cable Installed with a hand-adjustable base No cutting is needed

Read more less

Compatible with the following instruments: ST70* ST60+ ST290 Compatible hull material: wood and fiberglass Frequency: 200 kHz Cable: 45ft cable Hole diameter for installation: 2 in Other: Self-sealing removable paddle wheel insert. Note: E66023 Fairing block sold separately. *Using with ST70 requires purchase of ST70 Speed Pod and ST70 Depth Pod, sold separately.

Read more less

RMK-10 System Remote Control - Portrait & Landscape KeypadRaymarine's RMK-10 Remote Keypad is an ultra-compact wired keypad accessory that provides full control of aSeries, cSeries, eSeries, eS Series and gS Series Multifunction Displays (MFDs) from any mounting location. The fully backlit RMK-10 includes dedicated keys for home, menu, zoom in/out, window control, waypoint management, power/brightness, as well as Evolution autopilot control.RMK-10 also features the same multifunction rotary controller with the integrated cursor pad found on eS Series multifunction displaysThe RMK-10 can be surface-mounted or flush-mounted, and is available with key mats for horizontal or vertical installation. This gives you the flexibility to install the RMK-10 just about anywhere.RMK-10 Mounting OptionsThe RMK-10 is the perfect solution for controlling MFD’s mounted beyond arm’s reach, or in overhead electronics boxes. Instead of reaching for the MFD, the RMK-10 brings the system’s controls to you.For the ultimate in convenience, mount the RMK-10 in the arm of your favorite helm chair. Now it’s easy to sit back, relax and enjoy the ride on autopilot, while still being able to interact with your navigation system.RMK-10 is also great for bringing remote system control to secondary monitors and onboard LCD TV sets connected to the VGA or HDMI output of select e-Series, eS-Series and gS-Series displays. Now you can see and control your Raymarine navigation system from a below-deck navigation table, salon or stateroom.Networking & ControlUtilizing Raymarine’s RayNet high speed networking, the RMK-10 can be setup to control a single multifunction display, or multiple displays mounted at the same location. When controlling multiple displays on the same helm, the RMK-10 provides seamless control across all of the displays.When used with aSeries or gS Series Multitouch displays, the RMK-10 brings full HybridTouch™ control capability to these products. The RMK-10 integrates seamlessly with the LightHouse II user interface and allows the navigation system to be operated solely by touch, by keypad, or any variation between.

Read more less

Raymarine HV-300TH HyperVisionThru-Hull TransducerModel: A80604

Read more less

i40 Bidata Display w/Thru-Hull TransducersCompact and feature-packed instruments, the i40 series instruments are smart choice for boaters looking high performance and great value.The i40 series is simple to operate thanks to the use of just three control buttons, i40 has extra-large digits and razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. These SeaTalk® compatible instruments offer full integration with Raymarine autopilots and navigation equipment. The ultra-sleek design of i40 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. All i40 Instruments come with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately.i40 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 0.4 watts for superior run-time and excellent green credentials. The i40 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase. i40 Bidata Instrument The Raymarine i40 Bidata offers all of the functionality of the Depth and Speed instruments combined in a single space-saving display. Like the other i40 Instruments, the Bidata is available as a complete system with depth and speed transducers or as a display-only solution for remote readout of depth and speed at another location.The i40 Bidata's depth capabilities include easy-to-read displays of current speed, maximum speed, average speed, distance log, trip log as well as water temperature. Bidata also offers depth-related alarms and adjustments including shallow depth alarm, deep depth alarm, shallow anchor alarm, and deep anchor alarm, and depth offset controls. Its speed capabilities include displays of current speed, maximum speed, average speed, distance log, trip log as well as water temperature.i40 Key Features Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems. High contrast LCD displays with large digits for excellent visibility. Red backlighting for outstanding night-time visibility. Simple SeaTalk networking with other Raymarine instruments, autopilots and MFDs. Built-in transducer connections simplify installation. Small form factor saves space at the helm without sacrificing features. Supplied with:i40 Bidata displayE26009 Low profile thru-hull depth transducerE26008 Low profile thru-hull speed and temp transduceri40 Suncover Specifications: Shape: Rectangular Screen Size: 3.7" Instrument Function: Multifunction Box Dimensions: 4"H x 6"W x 27"L WT: 5.55 lbs UPC: 723193854273 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Raymarine RMK10 Remote Keypad - Portait and Landscape FaceplateModel: T70293The new Raymarine RMK-10 Remote Keypad is an ultra-compact wired keypad accessory that provides full control of aSeries, cSeries, eSeries, eS Series and gS Series Multifunction Displays (MFDs) from any mounting location.The fully backlit RMK-10 includes dedicated keys for home, menu, zoom in/out, window control, waypoint management, power/brightness, as well as Evolution autopilot control.RMK-10 also features the same multifunction rotary controller with the integrated cursor pad found on eS Series multifunction displaysThe RMK-10 can be surface-mounted or flush-mounted.The RMK-10 is the perfect solution for controlling MFD's mounted beyond arm's reach, or in overhead electronics boxes. Instead of reaching for the MFD, the RMK-10 brings the system's controls to you.For the ultimate in convenience, mount the RMK-10 in the arm of your favorite helm chair. Now it's easy to sit back, relax and enjoy the ride on autopilot, while still being able to interact with your navigation system.RMK-10 is also great for bringing remote system control to secondary monitors and onboard LCD TV sets connected to the VGA or HDMI output of select e-Series, eS-Series and gS-Series displays. Now you can see and control your Raymarine navigation system from a below-deck navigation table, salon or stateroom.Utilizing Raymarine's RayNet high speed networking, the RMK-10 can be setup to control a single multifunction display, or multiple displays mounted at the same location. When controlling multiple displays on the same helm, the RMK-10 provides seamless control across all of the displays.When used with aSeries or gS Series Multitouch displays, the RMK-10 brings full HybridTouchTM control capability to these products. The RMK-10 integrates seamlessly with the LightHouse II user interface and allows the navigation system to be operated solely by touch, by keypad, or any variation between.SpecificationsPoE classClass 1 Nominal supply voltage 12 / 24 V dc Operating voltage range 10.8V dc to 31.2V dc Power consumption 3.84W Waterproof rating IPX6 Network / power 1 x RayNet connector, (gS Series - 1000 Mb/s plus PoE), (aSeries , cSeries, eSeries - 100 Mb/s) What's in the Box: Keypad RayNet network cable 2m (6.6ft) Right angled power cable 2m (6.6ft) Mounting gasket 4 x mounting fixings Documentation pack Portrait Faceplate Lanscape Faceplate

Read more less

Raymarine SR200 SiriusXM InfoLINK Weather Receiver Raymarine SR200 SiriusXM InfoLINK Weather ReceiverModel: E70499 NEXRad Doppler Weather Radar Satellite Sea Surface Temperature (SST) Storm Tracking for Tropical Storms, Hurricanes and Typhoons Watchbox Alerts: Your Weather Guardian Angel Nearshore, Offshore and City Forecasts Surface Observation Stations and Offshore Buoy Reports SIRIUSXM Audio SiriusXM Marine is graphical weather and fishing information for boaters. Essential information like weather radar, NEXRAD storm cell tracking, tropical storm tracks and localized forecasts are all easily viewable inside the LightHouse 3 chart application. Fisherman can enjoy expanded information including high-resolution coastal and offshore sea surface temperature overlays, also displayed right on the live navigation chart.The Raymarine SR200 InfoLINK receiver brings subscription-based SiriusXM Marine weather and satellite radio to your Raymarine LightHouse 3 multifunction displays.The SR200 InfoLINK receiver can also provide access to over 150 channels of SiriusXM Satellite Radio programming including commercial-free music, sports, talk, entertainment, politics, comedy, religion, news and much more. The SR200 features an analog line output connection that you can easily connect to the auxiliary input on most marine stereo systems. SiriusXM channel selection, presets and controls are accessed from Raymarine's LightHouse 3 SiriusXM app.Super-compact and simple to install, the SR200 connects to the RayNet high speed Ethernet network and seamlessly delivers content to all your multifunction displays. A low-profile Shakespeare SRA-50 SiriusXM Marine antenna kit is included. The antenna can be surface mounted on any horizontal surface with a clear view of the sky, or pole mounted with the included threaded adapter.SiriusXM Marine service is available in the continental United States, southern Canada and coastal waters. The SR200 InfoLINK receiver requires a valid activation and subscription to SiriusXM Marine Weather and/or SiriusXM Satellite radio, sold separately. Please visit www.siriusxm.com/marine for full details on features, packages, pricing and for the most up-to-date satellite coverage map.SpecificationsProductSR200 InfoLINK SiriusXM Receiver Compatible Displays Axiom, Axiom Pro, Axiom XL (Requires LightHouse 3.9 or newer software) Weather Subscription Options SiriusXM Marine Weather Marine Offshore and Coastal Packages Audio Subscription Options SiriusXM Channel Line-up Dimensions 180mm(W) x 90.4(D) x 42mm(H) 7.1in(W) x 3.56in(D) x 1.65in(H) Product Weight TBD Water Ingress Protection IPX6/7 Operating Temperature Range -20oC to 70oC (-4oF to 158oF) Storage temperature range -40oC to 85oC -40oF to 185oF Nominal Voltage 12 or 24 V dc Operating Voltage Range +9 to 32 V dc Current TBD SeaTalkHS 1 Port SeaTalkNG No Connection SIRIUS Audio Out (line level) 4-pin audio output to 3.5mm stereo male SIRIUS Antenna Input 1 connection (SMA) Antenna SMA - SMB adaptor - 20mm Provided 1 connection (SMA) Antenna SMA - SMB adaptor - 20mm Provided R70621 - SR200 Raynet to infoLINK - 2M R70622 - SR200 Power Cable - 2M R70623 - SR200 Audio Cable A80368 - SRA50 Antenna + 25ft Cable Mounting Hardware Installation Guide and Documentation Kit What's in the Box: SR200 InfoLINK SiriusXM Receiver Shakespeare SRA-50 SiriusXM Antenna with pole and surface mounting kits SRA-50 interconnect cable (25-feet) SR200 InfoLINK to RayNet Interface cable (2 meters) Analog stereo (L/R) line output cable (2 meters) Power Cable (2 meters) Mounting hardware Installation guide and documentation kit

Read more less

Hose kit for installing SmartPilot autopilot system on Mercury Verado Engines.

Read more less

Raymarine RAY53 Compact VHF With GPSModel: E70524 Compact marine VHF with Digital Selective Calling Built-in GPS/GNSS receiver with a connection point for an optional external antenna NMEA2000 and NMEA0183 networking for integration with onboard systems Audio output connection for optional passive remote speaker (A80542) Surface and trunnion mount kits included Styled to compliment the Axiom family of multifunction displays Raymarine's Ray53 radio is small in size but big on features and performance. Ray53 is a full-function VHF marine radio with Class D Digital Selective Calling (DSC) and a built-in GPS receiver. Simply program your boat's MMSI number into the Ray53 and immediately benefit from the enhanced calling and safety features of DSC.SpecificationsOperating Temperature-20oC (-4oF) to +60oC (140oF) Storage Temperature -25oC (-13oF) to +70oC (158oF) Relative Humidity 95% Water Proofing IPx6 & IPx7 Connections 1x NMEA 01831x SeaTalkng (R) / NMEA 2000 1x Audio (RCA) 1x GNSS (GPS) antenna (TNC) Power Nominal Supply Voltage 12 V dc (Reverse polarity and over voltage protection) Operating Voltage Range 9 Vdc to 16 Vdc Current Consumption Less than 6 A at high power (13.6 V)Standby: 600 mAReceive: 2 A Transmitter Channels All available US, International and Canadian VHF marine bands Frequency Range 156.000 MHz to 157.425 MHz / 155.500 MHz to 161.425 MHz (Private channels) Frequency Stability +/- 1.5 ppm Channel Spacing 12.5 kHz Power Output Low power setting - 1 W High power setting - 25 W Spurious missions Better than -36 dBm at 25 W (Less than 0.25 μW) Maximum Deviation +/- 5 kHz Antenna Impedance 50 Ohms (typical) Receiver Receiver Type Double conversion super heterodyne Channels All available US, International and Canadian VHF marine bands Frequency Range 156.050 MHz to 163.275 MHz / 155.500 MHz to 161.425 MHz (Private channels) Sensitivity Better than 1 microvolt EMF @20dB SINAD Squelch Sensitivity Less than - 2 dBμ EMF Hum and Noise Better than -40 dB Audio Distortion Less than 10% Receiver Sensitivity Distance - 119dBm (0.25uV) @ 12dB SINAD (typical)Local - 110dBm (0.7uV) @12dB SINAD (typical) Adjacent Channel Selectivity More than 70 dB Spurious Response Rejection More than 70 dB Inter Modulation Rejection More than 70 dB GPS Channels 72 Cold Start <2 minutes Receiver IC Sensitivity -167 dBm (Tracking) / -148 dBm (Acquisition) GNSS Compatibility GPS GLONASS *Beidou SBAS Compatibility WAAS EGNOS MSAS Special Features Active Jamming and Interference Reduction Operating Frequency GPS L1 C/A GLONASS L10F Beidou B1 Signal Acquisition Automatic Almanac Update Automatic Geodetic Datum WGS-84 (alternatives available through Raymarine MFD) Refresh Rate 10 Hz (10 times per second Concurrent GNSS) Antenna Internal - Ceramic chip mounted near top of unitExternal - Passive antenna connection via TNC connector Position Accuracy Without SBAS: <= 15 metres 95% of the time - With SBAS: <= 5 metres 95% of the time What's in the Box: Ray53 VHF DSC Radio Sun cover Panel mount gasket Mounting bracket (Trunnion) Mounting bracket knobs Fistmic hook plate 4 x M4x25 screws (For Bracket (Trunnion) mounting) Documentation 4 x M4 nuts, spring washers and M4x25 machine screws (For Panel mounting) Protective antenna boot 2 x M4x12 screws (For Fistmic hook plate mounting) SeaTalkng (R) blanking plug SeaTalkng (R) 400 mm (15.7 in.) spur cable

Read more less

Raymarine B150M 300 Watt 20Deg Tilt Wide Beam CHIRP Thru HullModel: A80805 Depth and fast-response water-temperature sensing 300 W of power with a maximum depth of 183 m (600 feet) Medium frequency: 95 to 155 kHz - 26 deg x 17 deg beamwidth put more energy on targets for great target separation 60 kHz of total bandwidth from one transducer ideal for inshore or coastal fishing Low-profile, thru-hull housing provides good display resolution at speed when installed properly Recommended for stepped, planing, or displacement hull Bronze housing for use in a fiberglass or wood hull Also available as a transom mount (TM150M) Patented Xducer ID(R) technology Fixed 20 deg tilted version for 16 to 24 deg hull deadrise angles Airmar's B150M delivers a great combination of shallow and mid-depth performance. Operating at a frequency range of 95 to 155 kHz, this transducer reveals fish in shallow waters and deeper depths down to 183 m (600 feet) with ultra-clear target resolution. Narrow beam angles are perfect for detecting fish holding close to structures and suspended fish-ideal for freshwater, inshore, or coastal fishing in shallow to medium depth.Tilted ElementTM transducers have the ceramic element fixed at a 20 deg, 12 deg, or 0 deg angle within the housing. When the transducer is installed almost flush to the hull, the tilt of the element corrects for the hull deadrise, orienting the beam directly down. This ensures maximum echo returns to the transducer for more accurate depth readings.SpecificationsPower Rating300 W Max Deadrise Angle 24 deg Housing Bronze Functions Depth, Temperature Hull Material Fiberglass or wood Max Vessel LOA Up to 8 m (26 feet) Hole Size 51 mm (2) Usable Shaft Length 66.5 mm (2.62 in) Mounting Style Tilted Element Thru-Hull Acoustic Window Urethane Common Use Leisure/Yachting

Read more less

Raymarine CPT-120 Bronze Thru Hull Transducer with High Speed Fairing Block Model: A80350 UPC: 723193799239 SpecificationsInstallation TypeThrough-hull Material Bronze Maximum Depth DV=600, FF=900 Beam Width 25 deg/60 deg Cable Length 33ft/10m Deadrise 0-25 deg What's in the Box: CPT-120 Transducer with 33 feet cable Fairing block

Read more less

RNS-5 5 Port RayNet Gigabit SwitchThe RNS-5 network Gigabit switch is designed for expanding Raymarine integrated chartplotter systems using RayNet high-speed Ethernet cabling. Use the RNS-5 to integrate Axiom displays with radars, sonar modules, IP cameras, and Teledyne FLIR thermal cameras. The RNS-5 also supports networking with Raymarine YachtSense digital control systems and the YachtSense Link marine mobile router. Two RNS-5 switches can be daisy-chained together for larger systems. The RNS-5 is simple to install and requires no complicated setup.Features: 5 RayNet Ethernet gigabit ports for fast and reliable connectivity Rugged IPX6 and IPX7 construction Reliable, waterproof RayNet connector Ethernet cable ports Designed for simple bulkhead mounting LED power and network port status indicators Unmanaged- simply plug and play with Raymarine devices No complicated setup or configuration Quick Guide (pdf)

Read more less