C-Cleat Cam Cleat - Medium - Black w/Black Base3-12mm(1/8" - 1/2") Rope DiameterIntensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.Features: Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance Cam profile and multi-coil spring minimise line entry and release effort Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads Applications:Range of cleats for all requirements including control lines, jib sheet and mainsheet cleatingMaterials: Carbon fiber composite cams Long strand glass fiber reinforced polymer base PTFE impregnated Acetal slotted bearing Stainless steel multi-coil spring Specifications: Color: Black Box Dimensions: 1"H x 2"W x 3"L WT: 0.1 lbs UPC: 9316800450787

Read more less

Split Cotter Ring - 25mm(1") IDSuits clevis pins RF267 - RF278Grade 316 Stainless Steel

Read more less

Bunk NetThe Blue Performance Bunk Net is perfect for preventing a person from rolling out of bed or storing equipment in rough weather.Features: Ripstop nylon reinforced with nylon webbing and polyester borders Two mesh everyday bags, perhaps for glasses and a watch 37cm straps on the bottom edge For the strongest support, straps can be tucked in under the mattress and bolted/screwed into place Specifications (L x H):P600: (inch) 66.9 x 20.9 + 14.6" straps / (mm) 1700 x 530 + 370mm straps*Sold as an Individual

Read more less

Halyard Bag - SmallThis handy Blue Performance bag is perfect for storing your halyards at the mast.Features: Storage for up to three mast-head halyards Velcro mast straps Self-draining Waterproof, mildew, and UV-resistant Ripstop Three hanging rope clips inside the bag to separate halyards Heavy duty zip front with Velcro flap The open collar at the top for halyard entry Specifications (L x W):Small: (inch) 5.9 x 17.7 x 4.3 / (mm) 150 x 450 x 110*Sold as an Individual Specifications: Type: Bags Box Dimensions: 5"H x 7"W x 18"L WT: 1.7 lbs UPC: 8717933051048

Read more less

57mm Single Carbo Ratchet Cheek BlockCarbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Features: Sheave Ø (mm): 57 mm Sheave Ø (in): 2-1/4 in Maximum line Ø (mm): 10 mm Maximum line Ø (in): 3/8 in Maximum working load (kg): 227 kg Maximum working load (lb): 500 lb

Read more less

Sta-Plug Emergency PlugSta-Plug™ is Forespar’s new form fitting emergency plug.  A soft cone shaped design allows it to easily fill the irregular shapes of hull impact breaches, as well as any round hole leak from a hose or through-hull.  Unique edge gripping riblets help hold the plug in a hole, keeping water out.  The riblets help Sta-Plug™ conform to the shape of the hole, sealing a leak near the edge where a tight fit is crucial, and holding the plug more securely in place. Different by design, Sta-Plug’s™ shape includes a series of concentrically larger riblets stepped along the length of the cone.  These riblets offer two big advantages over traditional straight edged emergency plugs: They help Sta-Plug™ conform to the hole near the edge where a tight fit is most crucial They help hold it more securely in place Twist and compress by hand to insert into hole Expands after insertion to hold in place Intended for temporary emergency use with continuous monitoring only, it gives the skipper greater peace-of-mind to allow them to focus on getting the boat to safety.Made from high density foam, Sta-Plug™ will remain soft and ready to go for years and will not mold or swell up like conventional wood plugs. Can be cut with a knife to use in irregular shaped holes, or torn by hand near the riblets to make smaller diameter plugs for smaller holes   Tearing at the 8th riblet creates a plug with a 2” diameter base Made from high density foam that is not susceptible to mold or swelling Bright orange color allows it to be quickly located in an emergency Dimensions: 9” High x 5” Diameter at base Made right here in the USA Not for Fuel Leaks

Read more less

Winch Handle Bag - SmallStore your winch handle in this handy winch handle bag.Features: Plastic reinforcement holds the shape Stores up to three winch handle in size large Self-draining Waterproof, mildew, and UV-resistant material Reinforced lining Specifications (L x W):Small: (inch) 9.4 x 3.5 x 2.8 / (mm) 240 x 90 x 70*Sold as an Individual Specifications: Type: Bags Box Dimensions: 3"H x 7"W x 13"L WT: 0.7 lbs UPC: 8717933038360

Read more less

Bulkhead Sheet Bag - MediumStore your drinks, sun cream, etc, in this handy storage bag.Features: Integrated Raincover Attach and remove using Blue Performance screw-in hooks (not included) One compartment Mesh side panels Waterproof, mildew, and, UV-resistant material Ripstop lining An integrated pocket in the base contains a waterproof cover manufactured from UV-resistant Ripstop Specifications (L x W):Medium: (inch) 13.8 x 9.8 x 2.8 / (mm) 350 x 250 x 70*Sold as an Individual Specifications: Type: Bags Box Dimensions: 2"H x 12"W x 16"L WT: 1.8 lbs UPC: 8717933038278

Read more less

Bulkhead Sheet Bag - LargeStore your drinks, sun cream, etc, in this handy storage bag.Features: Integrated Raincover Attach and remove using Blue Performance screw-in hooks (not included) One compartment Mesh side panels Waterproof, mildew, and, UV-resistant material Ripstop lining An integrated pocket in the base contains a waterproof cover manufactured from UV-resistant Ripstop Specifications (L x W):Large: (inch) 15.7 x 11.8 x 2.8 / (mm) 400 x 300 x 70*Sold as an Individual Specifications: Type: Bags Box Dimensions: 2"H x 14"W x 18"L WT: 2.2 lbs UPC: 8717933038285

Read more less

Winch Handle Bag - SmallStore your winch handle in this handy winch handle bag.Features: Plastic reinforcement holds the shape Stores up to three winch handle in size large Self-draining Waterproof, mildew, and UV-resistant material Reinforced lining Specifications (L x W):Large: (inch) 9.4 x 4.7 x 3.9 / (mm) 240 x 120 x 100*Sold as an Individual Specifications: Type: Bags Box Dimensions: 3"H x 7"W x 13"L WT: 0.8 lbs UPC: 8717933038377

Read more less

Cockpit Combination BagThis Blue Performance handy storage bag, lets you store your winch handle, drinks, sun cream, etc.Features: Attach and remove using Blue Performance screw-in hooks (not included) Flap with Velcro closure External front pocket with mesh Two external winch handle bags/bottle holders Two inner pockets Waterproof, mildew, and UV-resistant material Ripstop lining Specifications (L x W):Combination Bag (inch) 18.5 x 11.8 x 2.8 / 470 x 300 x 70*Sold as an Individual Specifications: Type: Bags Box Dimensions: 4"H x 15"W x 20"L WT: 3.4 lbs UPC: 8717933038254

Read more less

C-Cleat Cam Cleat - Medium - Grey w/Grey Base3-12mm(1/8" - 1/2") Rope DiameterIntensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.Features: Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance Cam profile and multi-coil spring minimise line entry and release effort Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads Applications:Range of cleats for all requirements including control lines, jib sheet and mainsheet cleatingMaterials: Carbon fiber composite cams Long strand glass fiber reinforced polymer base PTFE impregnated Acetal slotted bearing Stainless steel multi-coil spring Specifications: Color: Grey Box Dimensions: 1"H x 2"W x 3"L WT: 0.12 lbs UPC: 9316800191604

Read more less

4 Leg Dinghy SlingThe Wichard 4 Leg Dinghy Sling is made of forged stainless steel hardware, that is joined with 1-3/4" military spec. parachute harness webbing. This combination provides strong and reliable support, for an easily operated Dinghy lifting sling. Features: Type: 4 Leg & Safe Working Load of 2500 lb 1-3/4" x 8' Legs that are adjustable  Applications:The 4 Leg Dinghy Sling is intended to be used on Dinghies up to 12ft*Note: The new style of Dinghy slings are blue, not yellow

Read more less

Round Sail Track StopsRound 0.50" dia. x 0.875" (13 x 22mm)When it's time to lower your sail you can rely on Davis' Round Sail Track Stop to hold your sail and its slides in place on the mast and boom. Large knurled wheels are released with ease. Made of heavy-duty, black anodized aluminum and marine garde nickel plated brass. Quick Guide (pdf)

Read more less

Mid-Rail Chock/Cleat Stainless Steel - 1-1/4"Chock cleats will fit Schaefer T-Track measuring 1-1/4" wide, 7/16" overall height, 3/16" "T" thickness and a base width of 11/16". They will not fit earlier versions of T-Track or some competitors models. Specifications: Length 7-1/2" (190 mm) ID 1-3/4" (45 mm) Line Size 5/8" (16 mm) Track 1-1/4" x 3/16" (31 mm x 4.6 mm) Pin. Size .355 SWL 4500 lbs. (2045 kg) Weight 1.5 lbs. (.68 kg) Specifications: Color: Stainless Box Dimensions: 2"H x 3"W x 9"L WT: 1.6 lbs UPC: 740507024139

Read more less

Traction UV Open Finger Gloves - White & Black - LargeLightweight polyester and spandex knit with UV-treated yarns shield hands from the sun. Extended fabric on the index fingers guards against blisters and cuts, while AX Suede G-Series overlays protect the palms. Silicon grip tabs make pulling them on and off a breeze.Features: Palm overlays offer high grip, abrasion resistance, and perforation for venting A longer index finger reduces blisters and cuts Extended wrist coverage with pairing snaps for storage Pull tabs with silicon grip for easy donning and doffing Specifications: Ideal For: Fishing, boating, paddling Fit: Regular Material: Polyester Weight: (lbs) 0.17 Fit: Size: Large Hand Length: (inch) 7.75" / (cm) 19.7 Hand Circumference: (+/- .25-inches): (inch) 9.25" / (cm) 23.5 Specifications: Type: Gloves Box Dimensions: 2"H x 7"W x 13"L WT: 0.2 lbs UPC: 062533005327

Read more less

Single Fixed EyePlain Bearing BlocksBarton plain bearing blocks have a precision molded acetal sheave running on a large diameter brass bearing, ensuring free running under the highest of loads.Specifications Sheave size: 20mm x 8mm Max rope diameter: 5mm Safe working load: 275kg / 606lbs Breaking load: 550kg / 1210lbs Length: 39.1mm Weight: 13g

Read more less

Line Tamer - Grey PairA line storage device designed to keep cockpits free from unused lines and halyards.  A smooth profile ensures no snagging as crew members brush past. Features:Suitable for rope coils of up to 7.87" (20) cm diameter*Sold as a Pair Specifications: Type: Cleats Box Dimensions: 1"H x 4"W x 7"L WT: 0.1 lbs UPC: 5035088520008 Brochure (pdf)

Read more less

10 Classic Winch - Size 10 - Single SpeedWhether you have a smaller yacht, or are just looking for that traditional look, Andersen Classic Winches provide hallmark quality and performance in a simple non self-tailing configuration.Single and two speed models, suiting conventional top mounted handles are available in sizes 10 to 46 providing a perfect economical solution for trailerable yachts and small keel boats where constant trimming is required.Traditionally styled, low profile Classic Winches are single speed and available with included base-mounted or below-deck handle configurations. They are standard equipment on many popular classic sailboats of up to 2 ton displacement, including Dragons, H-boats and Folkboats where their beautifully polished finish complements that of the craft.The single speed operation of the traditionally styled models is also ideally suited to “pumping” operation which is often required in confined cockpits. They are available in nominal maximum deck thickness models, but can also be made to order to suit custom deck thicknesses.All Andersen Classic Winches feature the Andersen Power Rib™ for safe, reliable grip and controlled release.Features: Single Speed Ideal for "pumping" operation in confined cockpits Specifications: Weight (lb): 1.6 Gear ratio 1st speed: 1.0 : 1 Power ratio 1st speed: 8.77 : 1 Drum "D" Ø (in): 2-1/4 Height "H" (in): 3-1/2 Line Entry "L" (in): 1-1/8 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Size 2 4:1 Vang System, Swivel HeadUpgrade your existing Vang system or use it as a boom preventer. Snap shackle fixings allow for quick and easy deployment. Professionally spliced and assembled. These can be used as Handy Billies.Features:For Boats up to 6.1m (20ft) Quick Guide (pdf)

Read more less

Single DO 550 Rope Clutch Cruising Racing Max 12mm LineFor cruising and racing yachts, offering a holding power of up to 550 kgs. Modern, high-performance materials. Manufactured from modern lightweight materials, the DO 550 moulded parts are made from high-grade plastics which are strong, light, and impact resistant. Cams and bases are from marine-grade aluminium, anodised for long life in the harsh marine environment.

Read more less

Stainless Steel Large Split Rings - 14mm - 10-PackFeatures: Easy-fit stainless steel split rings for use with our clevis pins Supplied in packs of 10

Read more less

Tubular Cleat - 6mmThese handy cleats have many uses where light loads are expected.Specifications: Weight: 5g Dimensions: 55mm x 13mm x 14mm Size: 55mm Fastenings: 4mm

Read more less

Deck Plate with Fixing & Eye with Blanking Plug - M12 EyeTurned from solid bar 316 stainless steel with a highly polished finish, the deck plates have a centre anchoring hole in three standard metric thread sizes – M8, M10, and M12, each supplied with a stainless steel blanking plug. Designed to be mounted flush with the deck using three fixing bolts, the sealed internal thread prevents water ingress. The design prevents trip hazards on board when not in use. The range allows for a multitude of uses, including: temporary fixing eyes, boat tie downs, deck mounted boarding ladders, stand up blocks, davit mounts, life raft holders, dive tanks & other endless uses.

Read more less

Large Snatch Block for Yachts Up to 40' (12.2M) - Stainless Steel SnapBarton Snatch Blocks give the crew the option to locate the block anywhere on deck using the stainless steel snap shackle, then locate a rope into the sheave without the need to reeve the line through. The side plate unclips to allow easy access.Manufactured using 316 stainless steel, they come with a snap shackle, snap hook, and glass-filled nylon side plates. You can also choose a stainless steel ‘D’ Shackle for ultimate strength. These are used to divert sheet lines already in use, typically the Spinnaker or Genoa, where a change of sheeting angle is required.*Important note: Snatch Blocks: When using Snatch Blocks on a toe rail, a bungee line should be attached to the becket to prevent the block 'tumbling' and causing damage by snagging.

Read more less

Size 2 Single Cheek BlockPlain Bearing BlocksBarton plain bearing blocks have a precision molded acetal sheave running on a large diameter brass bearing, ensuring free running under the highest of loads.Specifications Sheave size: 35mm x 12mm Max rope diameter: 8mm Safe working load: 370kg / 815lbs Breaking load: 740kg / 1630lbs Length: 80mm Weight: 73g

Read more less

Size 2 Single Swivel BlockA strong, lightweight range of blocks for use on dinghies and dayboats or as lead blocks on larger craft. Size 2 - Single Swivel Block.

Read more less

Line Tamer - White PairA line storage device designed to keep cockpits free from unused lines and halyards.  A smooth profile ensures no snagging as crew members brush past. Features:Suitable for rope coils of up to 7.87" (20) cm diameter*Sold as a Pair Specifications: Type: Cleats Box Dimensions: 1"H x 4"W x 8"L WT: 0.1 lbs UPC: 5035088520015 Brochure (pdf)

Read more less

Transom PintleManufactured from stainless steel with tough nylon surrounds. A wide range of rudder fitting widths are available.Features: Pintle Diameter: 9.5mm Fastenings Diameter: 5mm Weight: 70g

Read more less

60mm Element Stand Up BlockStand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.Element blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven journal bearing. So size for size, Element is priced significantly lower, than our previously least expensive blocks.Sideplates are hardcoat-anodized to resist corrosion. A tough composite bearing sheave resists corrosion for a long service life. Specifications: Sheave: 60mm (2-3/8") Max Line: 14mm (9/16") Max Working Load: 1100kg (2425lbs)

Read more less

29mm Single Bullet BlockLow-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control line applications. Features: Sheave: 29mm (1-1/8") Maximum Line: 8mm (5/16") Maximum Working Load: 136kg (300lb)

Read more less

20mm Lead RingLead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6 aluminum for a smooth, slippery surface, and with no moving parts, wear is minimal.Features: Center Hole: 20mm (9/16") Outer groove width: 14mm (9/16")

Read more less

40mm Carbo Air Block with Cam CleatLow-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications: Sheave Ø (mm)40 mm Sheave Ø (in)1 9/16 in Maximum line Ø (mm)6 mm Maximum line Ø (in)1/4 in Maximum working load (kg)68 kg Maximum working load (lb)150 lb

Read more less

57mm Carbo Air Block with SwivelLow-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming.Specifications: Sheave: 57mm / 2-1/4in Length: 110mm / 4-5/16in Weight: 87g / 3.1oz Shackle pin: 5mm / 3/16in Maximum line: 10mm / 3/8in Maximum working load: 359kg / 792lb Breaking load: 1079kg / 2380lb

Read more less

16mm BlockThe 16 mm is Harken’s® smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load. The 404 uses an O-ring to keep the line in the sheave during intermittent loading.Specifications: Sheave: 16mm / 5/8in. Length: 29mm / 1-1/8in. Weight: 10g / .33oz Maximum line: 5mm / 7/32in Maximum working load: 113kg/ 250lb Breaking load: 544kg / 1200lb

Read more less

Micro Carbo-Cam CleatHarken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams® for racing where weight is critical, or where adjustments are less frequent.Specifications: Height: 22mm / 7/8in. Length: 48mm / 1-7/8in. Width: 24mm / 15/16in. Weight: 19g / .67oz Minimum line: 3mm / 1/8in Maximum line: 6mm / 1/4in. Fastener spacing: 27mm / 1-1/16in. Fasteners: 4 RH mm / #8 RH in. Maximum working load: 68kg/ 150lb Breaking load: 136kg / 300lb Pawls: Plastic carbon-matrix

Read more less

22mm Triple Micro BlockLow-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes.Specifications: Sheave: 22mm / 7/8in. Length: 51mm / 2in. Weight: 57g / 2oz. Maximum line: 6mm / 1/4in. Maximum working load: 227kg / 550lb Breaking load: 544kg/ 1200 lb

Read more less

4mm Shallow Bow ShackleForged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter.Bow shackles are best for multidirectional loads. Shallow bow shackles are proportionally wider for their length than regular bow shackles.Specifications: Shackle pin: 4mm / 5/32in Weight: 8.5g / 0.3oz Maximum working load: 367kg / 810lb Breaking load: 735kg / 1620lb

Read more less

Safety Snap Hook - 50mmFeatures: Grade 316L forged snap hook Various applications onboard Outstanding working and breaking loads Modern design Applications:Various uses on board: fastening applications

Read more less

Series 55 Ratchet Orbit Block™ - Single - Swivel Head - Auto & ManualAutomatic Ratchet BlockNow you can enjoy the flexibility of setting up your ratchet blocks to suit yourself. Ronstan is the only company that offers a ratchet block with both auto and manual engagement modes. In the auto mode of the ratchet mechanism engages when load is applied, but switches off when it's released. This lets the sheet run out smoothly and freely-great for rapid easing of the sheet and for gybing asymmetric spinnakers. In manual mode, the ratchet mechanism can be switched on or off as required. This is the preferred mainsheet set-up for may top sailors. Try the block in both modes and see which you prefer - you really can't go wrong. Awesome Ratchet Block Holding PowerQuite simply, Ronstan Ratchet Orbit Blocks™ have the highest holding power available. The sophisticated NC-machined sheave features Generation 2 of our sheave cross-hole geometry. Its holding power is up to 21:1, almost double that of our nearest competitior. The unique sheave design has 12 gripping faces which directly resist loaded line movement. Traditional designes have only 8 faces with an angled resistance to line movement. Our Generation 2 design has straight resistance faces which both distribute the load and minimise rope wear. These faces are offset from the radial line, to draw the rope down into the gripping area when under load. Features: Up to 20:1 holding power Smooth easing of sheets High performance cleating Swivel shackle head for unlimited block rotation. Stainless steel shackle head for ultimate durability and compatibility with harsh fixing points. Automatic & manual ratchet block Applications: Mainsheet systems and spinnaker sheets on dinghies, sportsboats and small keel boats to 8M(26') Halyard, vang and backstay applications on boats to 8M(26') Spinnaker sheets on sportsboats and small keel boats (lateral lead blocks) Materials: Sheave: Hard anodised Aluminium Ball Bearings: High compression strength carbon black Aceetal Frame/Cheeks: Toughened, glass fiber reinforced Nylon Rope Link: UV stabilized, multi-strand impregnated SK75 Dyneema® Head fitting: grade 316 stainless steel Specifications:Sheave Ø: 55mm(2")Max. Rope Ø: 10mm(1/2")M.W.L.: 250kg(550lbs)B. L.: 650kg(1,430lbs)Weight: 82g(2.9oz)

Read more less

Symmetric Carbin Hook Without Eye - Length 120mm - 15/32"Features: Grade 316L stainless steel carbine hooks Symmetrical shape without eye                                           Applications:For fastening applicationsSpecifications: Materials 316L stainless steel grade Length (inch) 4-23/32" Working load (lb) 2990 WLL (lb) 1670 Breaking load (lb) 8370 Weight (lb) 0.441 Dimensions (see 2nd image): A (inch) 53/64" B (inch) 5/8" D diameter (inch) 15/32"

Read more less

Double Jaw Rigging Toggle - 1/4" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins. Please see the attached charts for the exact dimensions.Specifications:Safe working load = 1000 lbs.

Read more less

Quick Release Lever - 1/4" PinThe Johnson Hyfield-type lever has several very practical features that have been developed after extensive testing on both high-performance multi-hulls and monohulls. The fitting is rugged, having an ultimate strength of 2500 lbs. A positive stop is provided to prevent jamming fingers between the fitting and wire when thrown open under load and the large surface area of the push pad makes it easier to close the lever under load. Lever take-up is 2-1/8″ to an over-center position and comes with a quick-release pin for positive locking. The extender arm may be had in either 1/4″ or 5/16″ pin size. This is an essential piece of hardware on Catamaran shrouds to allow the crew to right the boat after a capsize. Without it, another boat or extraordinary effort is required. Trailer-able boats up to 26 feet find that a lever on the forestay greatly facilitates stepping and unstepping the mast.Specifications: Approximate breaking strength = 2,500lbs Safe working load = 1000lbs Extender number of holes = 3

Read more less

Snap Gate Hook - Body Only - 5/16" - 24 Right HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook. Specifications:5-16"-24 RH

Read more less

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

Read more less

Snap Gate Hook - Body Only - 5/16" - 24 Left HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook. Specifications:5-16"-24 LH

Read more less

Pulpit Anchor for 1" RailThis fitting can be used on the stern rail and bow pulpit to terminate jaw fittings for lower or upper life lines. (1/2" hole). The hole will not accept cast gate hooks. 

Read more less

Jaw/Jaw Tubular Turnbuckle T ToggleFor those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our integral toggle jaw, provides positive locking and ease of adjustment.Forged silicon bronze bodies with 316 stainless ends offer a great non-galling combination. Integral toggle jaw eliminates the need for a separate rigging toggle. Specifications: Jaw with "T" Toggle Construction Machine swage Bronze body/ 316 stainless ends Wire size: 5/32" Breaking strength: 2,500 pounds Safe working load: 1,000 pounds Thread size: 1/4-28 Pin to pin length: 8" (closed) 11" (open) Body length: 4-1/2" Pin diameter: 1/4"  Weight: 5 ounces

Read more less