Self-Locking Twisted Shackle - Diameter 6mm - 1/4"Features: Self-locking twisted shackle forged in grade 316L stainless steel The pin is locked into one of the indentations No risks of loosening due to vibrations Outstanding working and breaking loads Applications: Perfect for application where a  90° angle twist setup is required Often used to attach an unarticulated part (block on a rail) or on purchases Specifications: Materials 316 stainless steel grade Working load (lb) 1320 Breaking load (lb) 3300 Weight (lb) 0.06 Dimensions (see 2nd page): A (inch) 1-3/16" B (inch) 15/32" C (inch) 15/64" D (inch) 15/32" D diameter (inch) 15/64" E (inch) 13/64" F (inch) 1-49/64"

Read more less

Series 40 All Purpose Block - Triple - Swivel HeadFeatures: Exceptionally high working loads Low maintenance, long service life Self-lubricating sheave Slotted pin shackle eliminates fouled lines Two way head post Spare parts - RF41010 Replacement Becket Pin, RF150 Shackle All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing.Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8m (26ft) Materials: U.V. stabilised Acetal sheaves Impact and U.V. resistant, fibre reinforced Nylon cheeks Grade 316 stainless steel bearing race Grade 316 stainless steel load strap and head fitting Sheave: UV stabilised acetal Cheeks: Impact modified, fiber reinforced and UV stabilized nylon

Read more less

Swivel Cleat & BaseSwivel cleat bases permit easy cleating and releasing from any angle.Sheave can be relocated to allow the control line to feed from belowComes complete with a 28mm(1-1/4") ball bearing sheave, small 'T-Cleat and the 'Fast Track' fairlead.Applications:Typically fitted to dinghy and catamaran spars for halyard, cunningham or outhaul control.Material:Fiber reinforced Nylon bodySpecifications:Rope Ø: 2 - 8mm(3/32" - 5/16")M.W.L.: 150kg(330lbs)B. L.: 300kg(660lbs)Weight: 100g(3.5oz)

Read more less

13mm Low Beam Track - 2MThis track is extruded from high-grade 6061-T6 aluminum and hard coat-anodized for a hard, long-lasting surface.Specifications: Weight (g): 429 g Weight (oz): 15.1 oz Mounting Hole Spacing (mm): 50 mm Mounting Hole Spacing (in): 1-31/32 in Fasteners (mm): 4 FH mm Fasteners (in): #8 FH in Minimum Curved Track Radius (m): 1.52 m Minimum Curved Track Radius (ft): 5 ft Length (m): 2 m Length (ft in): 6' 7" ft in Line Shedding Endstop: 2706 Splice Link: 2711

Read more less

13mm High-Load Trolley with 2X M4 Tapped HolesThis trolley features recirculating ball bearings housed in strong, lightweight, corrosion-resistant aluminum for dependable, low-friction linear travel. Use for moving loads and equipment, hoisting, and moving stage equipment, and architectural solutions.Features: High-load trolley with two M4-tapped holes on top Torlon® ball bearings handle high loads, reducing friction so the trolley moves smoothly along the rail Retaining clips keep ball bearings captive when the trolleys are removed for maintenance Specifications: Length (mm): 56 mm Length (in): 2-3/16 in Width (mm): 40 mm Width (in): 1-9/16 in Weight (g): 57 g Maximum Rated Load (kN): 1.4 kN Height (mm): 19 mm Height (in): 3/4 in Weight (oz): 2.01 oz Breaking Load (kN): 6.7 kN

Read more less

25mm Towable Genoa Car 2:1 PurchaseBarton Marine introduces its sleek range of Genoa Cars designed to run on 25mm (1 ”) T-Track. All GT cars are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A black anodized finish is also available. Designed over 18 months to meet the requirements of OEMs, riggers, and sailing enthusiasts who want high performance and longevity captured in contemporary design. The range is a class above the norm and features moulded nylon inserts to fight corrosion prevent damage to the low friction anodise finish and ensure smooth running in all marine environments.Features: Spectro anodized finish or black anodized The stainless steel plunger stops with positive action Moulded nylon slide inserts ensure free running Large, easy-grip plunger knobs Twist and Lock up plunger facility Brochure (pdf)

Read more less

32mm End Stop & Becket Genoa Car TrackBarton Marine's sleek range of Genoa is designed to run on 32mm (1 ¼”) T Track. All are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A black anodized finish is also available. Designed over 18 months to meet the requirements of OEMs, riggers, and sailing enthusiasts who want high performance and longevity captured in contemporary design. The new range is a class above the norm and features molded nylon inserts to prevent damage to the low-friction anodized finish and ensure smooth running in all marine environments. All Genoa Cars in this range are available in a heavy-duty HD version for large craft or for larger load applications.Features: Spectro or Black anodized finish The stainless steel plunger stops with positive action Moulded nylon slide inserts ensure free running Large, easy-grip plunger knobs with twist and lock facility Heavy-duty Genoa car options Brochure (pdf)

Read more less

12mm Eye Nut - Thread M16 x 200mmFeatures: A complete range of single-piece forged products for fastenings applications Outstanding breaking loads Available in different sizes  Applications: Various fastening applications Towing application Waterskiing lines attachment Specifications: Materials: 316L stainless steel grade Breaking load: (lb) 22040 / (kg) 10000 Weight: (lb) 0.364 / (g) 165 Dimensions: A: (mm) M16 x 200 B: (inch) 1 1/16" / (mm) 27 C: (inch) 2 13/64" / (mm) 56  D: (inch) 15/32" / (mm) 12 E: (inch) 1 11/32" / (mm) 34 Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual Quick Guide (pdf)

Read more less

Rubber Spreader Boot - Pair - Large - WhiteFeatures: White Rubber Spreader Boot Large Spreader Insert: 2" - 3" Stay Insert: 3/16" Length: 2-7/8" Height: 7-1/2" Specifications: Type: Spreaders Box Dimensions: 3"H x 5"W x 8"L WT: 0.5 lbs UPC: 725060920012

Read more less

Cam Fairlead - BlackMounts directly to our 70-17 Cam Cleat. Will require (2) #10 RH fasteners.

Read more less

Aluminum Deck Cleat - 5"Length 5" (127 mm), Line Score 1/2" (13 mm), Fasteners (2), #12 FH (6 mm), C/C A 1-1/4" (32 mm), Weght 2 oz. (57 g)

Read more less

Twisted Shackle - 3/16" Pin - 1-3/32"L x 13/32"WFeatures: High strength to weight ratio Grade 316 Stainless Steel bodies and pins Coined shackle pin head

Read more less

Series 25 T-Track - Composite Slide - 102mm(4")For small keel boats and sportsboats T-track jib leads are a great blend of performance and functionality in a simple, efficient package. Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment. LightweightComposite jib lead cars continue the design philosophy of the award winning Ronstan BB and RT Orbit Blocks™, with virtually all metal components now replaced with high-tech polymers and fibre equivalents. The car design has been modelled and optimised using finite element analysis and rapid prototyping techniques to achieve maximum strength-to-weight characteristics. Orbit Block™ models use a Dyneema® Link which is 10 times stronger and lighter than steel, to provide the articulated connection between block and car.Integrated FunctionalityThe clever 2-piece car body is molded from a composite material that delivers low friction on the alloy track without the need for separate inserts. It also provides the required mechanical strength without the weight and corrosion drawbacks of metal parts. An integrated becket at the forward end of the car suits 2:1 sheet systems and the removable threaded pin allows easy fitting of alternate blocks and accessories.Low Profile and CompactSleek styling and the positioning of the attachment pin provide a low lead aft for the lead block. The Dyneema® Link allows full articulation. The plunger stop button has a flush finish and the contoured form of the car eliminates the chance of lines and sails becoming snagged.Precise AdjustmentThe ergonomic plunger stop toggle combined with low friction of the car body allows for easy one-handed adjustment. The toggle is located at the rear of the car for easy access from the cockpit on sports boats and small keel boats. An arrow is located on the side to indicate the position of the stop for repeatable settings. A 'Racing' track has 25mm(63/64") stop hole spacing for even more precise control of the car position and sheeting angle.Features: Low profile and lightweight Removable attachment pin to suit either Dyneema® Link or a shackle Integrated becket for 2:1 headsail sheet systems Applications:Headsail sheet leads on boats up to 8M (26').Materials:Toughened, glass fibre reinforced Nylon slide.DSpecifications:Length: 102mm(4")M.W.L.: 500kg(1,100lbs)B. L.: 1,000kg(2,200lbs)Weight: 107g(3.8oz)

Read more less

Size 2 Snatch Block with Stainless Snap Shackle - 35mm SheaveUnique to Barton, these are probably the smallest block of this type available.Important Note - Snatch BlocksWhen using small and medium snatch blocks on a toe rail, a bungee line should be attached to the becket to prevent the block from 'tumbling' and causing damage by snagging.Features: Extremely compact and strong  A multitude of uses on cruising or racing yachts where a large unit is not required Specifications: Sheave: 35mm (1.38") Sheave Width:17mm (0.67") Rope: 12mm (0.47") Break Load: 800kg (1,763.7lbs) SWL: 400kg (881.8lbs) Length: 110mm (4.33") Weight: 170g (0.37lbs)

Read more less

7mm Dyneema Loop with High Load Eye - 22mm BoreThe Barton high-load eye with loop is available in three sizes and can be used in various applications on board, including barber hauler, preventers, mast base block tidies, emergency blocks, occasional blocks, and toe rail blocks etc.The high-load eye, combined with the Dyneema loop, gives you a fast, efficient, simple, and extremely strong solution for changing the direction of any line. The hard anodised aluminium eye is designed to have very good wear-resistant properties with low friction, which, combined with the high-strength Dyneema loop, gives you an exceptional low weight to very high performance and load ratio.Features: High load eye compared to a standard plain bearing block on average across the range Friction increases by only 15% Strength increased by 272% Weight reduced by 51% Data based on using a 4mm D12 SK75 Dyneema core

Read more less

32mm HD Pin Genoa Car Heavy Duty with Plunger Stop - BlackBarton Marine's sleek range of Genoa is designed to run on a 32mm (1-1/4”) T Track. All are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A black anodized finish is also available. Designed over 18 months to meet the requirements of OEMs, riggers, and sailing enthusiasts who want high performance and longevity captured in contemporary design. The new range is a class above the norm and features molded nylon inserts to prevent damage to the low-friction anodized finish and ensure smooth running in all marine environments. All Genoa Cars in this range are available in a heavy-duty HD version for large craft or for larger load applications.Features: Spectro or Black anodized finish The stainless steel plunger stops with positive action Moulded nylon slide inserts ensure free running Large, easy-grip plunger knobs with twist and lock facility Heavy-duty Genoa car options Brochure (pdf)

Read more less

32mm Towable Genoa Car 2:1 Purchase - Heavy DutyBarton Marine introduces its new sleek range of Genoa designed to run on 32mm (1 ¼”) T Track. All are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A black anodized finish is also available. Designed over 18 months to meet the requirements of OEMs, riggers, and sailing enthusiasts who want high performance and longevity captured in contemporary design. The new range is a class above the norm and features molded nylon inserts to prevent damage to the low-friction anodized finish and ensure smooth running in all marine environments. All Genoa Cars in this range are available in a heavy-duty HD version for large craft or for larger load applications.Features: Spectro or Black anodized finish The stainless steel plunger stops with positive action Moulded nylon slide inserts ensure free running Large, easy-grip plunger knobs with twist and lock facility Heavy-duty Genoa car options Brochure (pdf)

Read more less

32mm HD Pin Genoa Car Heavy Duty with Plunger StopBarton Marine introduces its new sleek range of Genoa designed to run on 32mm (1 ¼”) T Track. All are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A black anodized finish is also available. Designed over 18 months to meet the requirements of OEMs, riggers, and sailing enthusiasts who want high performance and longevity captured in contemporary design. The new range is a class above the norm and features molded nylon inserts to prevent damage to the low-friction anodized finish and ensure smooth running in all marine environments. All Genoa Cars in this range are available in a heavy-duty HD version for large craft or for larger load applications.Features: Spectro or Black anodized finish The stainless steel plunger stops with positive action Moulded nylon slide inserts ensure free running Large, easy-grip plunger knobs with twist and lock facility Heavy-duty Genoa car options Brochure (pdf)

Read more less

Jaw/Jaw Tubular Turnbuckle T-Style 5/16-24 ThreadFor those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our integral toggle jaw, provides positive locking and ease of adjustment.Forged silicon bronze bodies with 316 stainless ends offer a great non-galling combination. Integral toggle jaw eliminates the need for a separate rigging toggle. Specifications: Jaw with "T" Toggle Construction Machine swage Bronze body/ 316 stainless ends Wire size: 3/16" Breaking strength: 4,000 pounds Safe working load: 1,600 pounds Thread size: 5/16-24 Pin to pin length: 9" (closed) 12-3/4" (open) Body length: 5-1/8" Pin diameter: 5/16"  Weight: 8 ounces

Read more less

Double Threaded Interlocking Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.

Read more less

Sea Rail Cover - 2 MetersFeatures: The outer cover of UV-resistant polyester with Velcro closure over the full length Mid-layer of durable foam The inner core of clear flexible plastic tube, spiral cut, to protect the foam mid-layer Easy to use:  Thread the wire of the rail through the inner core and foam mid-layer Fit the Ripstop cover over the foam mid-layer Fasten each end of the cover with a drawstring to prevent sliding Specifications (L):Large: (ft) 6.6 / (m) 2*Sold as an Individual Specifications: Type: Covers Box Dimensions: 2"H x 2"W x 72"L WT: 1.7 lbs UPC: 8715738008670

Read more less

40mm Carbo Block Single with Swivel & BracketLow-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Features: Sheave Ø (mm): 40 mm Sheave Ø (in): 1-9/16 in Maximum line Ø (mm): 10 mm Maximum line Ø (in): 3/8 in Maximum working load (kg): 220 kg Maximum working load (lb): 485 lb

Read more less

25mm Wire Block with ShackleLightweight, low-friction wire blocks carry wire halyards and high-strength control lines on boats of all sizes.Specifications: Sheave: 25mm / 1in. Weight: 28g / 1oz. Shackle pin: 5mm / 3/16in, Maximum wire: 2mm / 3/32in. Maximum line: 4mm / 5/32in. Maximum working load: 454kg / 1000lb Breaking load: 907kg/ 2000 lb

Read more less

22mm Double Micro Block with BecketLow-friction Micro blocks are compact and lightweight. Specifications: Sheave: 22mm / 7/8in. Length: 64mm / 2.5in. Weight: 43g / 1.5oz. Maximum line: 6mm / 1/4in. Maximum working load: 159kg / 350lb Breaking load: 544kg/ 1200 lb

Read more less

40mm Carbo Air Double Swivel BlockLow-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Specifications: Sheave Ø (mm)40 mm Sheave Ø (in)1 9/16 in Maximum line Ø (mm)10 mm Maximum line Ø (in)3/8 in Maximum working load (kg)440 kg Maximum working load (lb)970 lb Quick Guide (pdf)

Read more less

Wire Block - Tubular Rivet Head w/Removable Nylatron® Sheave - 45mm(1-3/4") Sheave DiameterWire blocks have purpose designed narrow sheaves and grooves.Removal sheave for easy fitting and without cutting the wire terminationFeatures: Flared cheeks to minimise chafing Removable sheavesApplications:Wire blocks suit halyards, vang and backstay applicationsMaterials: Grade 316 stainless steel cheeks Nylatron® sheave Specifications:Sheave Ø: 45mm(1-3/4")Max. Cable Ø: 6mm(1/4")M.W.L:850kg(1,870lbs)B.L.: 1,700kg(3,740lbs)Weight: 88kg(3.1oz)

Read more less

Series 40 All Purpose Block - Single CheekFeatures: Exceptionally high working loads Low maintenance, long service life Self-lubricating sheave All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing.Can be mounted on masts and booms using the curved surface adapter. Can be stacked to create a double version, but no more than 60% of the rated working load should be applied to the upper sheave. Stackable with Ronstan Series 40 deck organizers.Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8m (26ft) Materials: U.V. stabilised Acetal sheaves Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel bearing race Alloy cheek plates

Read more less

Wire Block - Tubular Rivet Head w/Nylatron® Sheave - 25mm Sheave DiameterWire blocks have purpose designed narrow sheaves and grooves.Applications:Wire blocks suit halyards, vang and backstay applicationsMaterials: Grade 316 stainless steel cheeks Nylatron® sheave Specifications:Sheave Ø: 25mm(1")Max. Cable Ø: 3mm(1/8")M.W.L:450kg(990lbs)B.L.: 900kg(1,980lbs)Weight: 40kg(1.4oz)

Read more less

Bow Shackle- Slotted PinFeatures:High strength to weight ratioMaterials:Grade 316 stainless steel bodies and pins

Read more less

Parrel Bead - 32mm(1-1/4") OD - Green - (Single)Max. Rope Ø: 6mm(1/4")Convenient way to terminate control lines while also providing a textured grip for pulling. Recess in one side to contain the stop knot.Impact resistant, U.V. stabilized Nylon

Read more less

Series 40 All Purpose Block - Single Upright LeadLead blocks are a low profile solution for leading halyards or other rig sail controls back to cleats or jammers. Ideal for high load applications. Wear resistant sheave material, in lightweight, self lubricating polymer, is suitable for use with rope or wire.Applications:Typically used for halyards at the mast base.Materials: UV stabilised acetal sheave Grade 316 stainless steel load housing

Read more less

Captive Pin Twisted Shackle - Diameter 5mm - 3/16"Features: Captive pin twisted shackle forged in grade 316L stainless steel The pin is connected to the body at all times even when opened The pin is locked into one of the indentations No risks of loosening due to vibrations Outstanding working and breaking loads Single-handed operation for more safety Part # 1422 is not suitable for lifting applications Applications: Perfect for application where a 90° angle twist setup is required Often used to attach an unarticulated part (block on a rail) or on purchases Specifications: Materials 316 stainless steel grade Working load (lb) 1050 Breaking load (lb) 3300 Weight (lb) 0.051 Dimensions (see 2nd image): A (inch) 1-29/64" B (inch) 25/64" C (inch) 15/64" D (inch) 7/16" D diameter (inch) 13/64" E (inch) 13/64" F (inch) 1-31/32" G (inch) 1-1/16"

Read more less

4mm Dyneema Loop with High Load Eye - 12mm BoreThe Barton high-load eye with loop is available in three sizes and can be used in various applications on board, including barber hauler, preventers, mast base block tidies, emergency blocks, occasional blocks, and toe rail blocks etc.The high-load eye, combined with the Dyneema loop, gives you a fast, efficient, simple, and extremely strong solution for changing the direction of any line. The hard anodised aluminium eye is designed to have very good wear-resistant properties with low friction, which, combined with the high-strength Dyneema loop, gives you an exceptional low weight to very high performance and load ratio.Features: High load eye compared to a standard plain bearing block on average across the range Friction increases by only 15% Strength increased by 272% Weight reduced by 51% Data based on using a 4mm D12 SK75 Dyneema core

Read more less

Size 0 20mm Plain Bearing Pulley Block CheekThe Barton Size 0 Plain bearing block has 20mm (3/4″) sheaves and is also available in ball bearing sheaves. They are designed for high strength and performance but lightweight with the range starting at only 13gms (0.5oz).Suitable for up to 6mm (1/4″) rope Ideal for use on dinghies, day boats, and smaller craft or lead blocks, flag pennants, etc. on larger yachts. Quick Guide (pdf)

Read more less

Spinnaker Pole Slide Car (32mm)Features a heavy-duty stainless steel ring welded to an attachment plate, which is through-bolted to the slide. Generous ring opening to accept most pole ends.Plain bearing genoa cars, sliders, and spinnaker pole slides, plus stand-up blocks.A popular range of Genoa cars and sliders designed to run on 32mm (1-1/4”) T track. All are manufactured from high-quality marine-grade aluminium with our unique grey anodised finish for added protection.All cars and sliders featured on these pages have moulded nylon inserts to ensure free, smooth running under load and prevent damage to the finish or potential corrosion.All Genoa cars in this range are available in a heavy-duty version for larger craft or for larger load applications.Features: Grey anodized finish. Stainless steel plunger stops with positive action. Molded nylon slide inserts ensure free running. Large, easy grip plunger knobs. Heavy-duty Genoa car options. Cars and sliders are compatible with most makes of ‘T’ track. Modified slider inserts are available for obscure sizes.

Read more less

Size 3 45mm Plain Bearing Pulley Block Double Upright BlockThe size 3 Barton plain bearing blocks have 45mm (1 3/4" sheave size 3 block range incorporates modern design with stainless steel frames and the latest advanced materials, using 30% fibre glass filled nylon and Acetal sheaves to maximise their strength whilst keeping weight to a minimum. Suitable for use as mainsheet, vangs, lead blocks, or wherever a powerful and compact purchase system is required on dinghies, dayboats, and lightweight cruisers.Suitable for up to 10mm (3/8") rope.

Read more less

Genoa Slide Car (25mm)Designed with a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will accept most Barton blocks.Plain bearing genoa cars, sliders, and spinnaker pole slides.A popular range of Genoa cars and sliders designed to run on 25mm (1”) T track. All are manufactured from high-quality marine-grade aluminium with our silver anodised finish for added protection.Features: Silver anodized finish Stainless plunger stops with positive action Molded nylon slide inserts ensure free running Large, easy grip plunger knobs. Cars and sliders are compatible with most makes of T-track.

Read more less

Deck Organizer Size 1 - 3 SheaveDesigned for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminum construction with a grey or black anodized finish. Sheaves are from molded Acetal with hollow stainless rivets to allow easy and tidy fitting.Specifications:Dimensions: 115mm x 28mm x 25mm (4.53" x 1.1" x 0.98")

Read more less

4mm Rope Stoppers - Black - PairRope Stoppers can also be referred to as parrel beads, tie balls, halyard stoppers, or stopper balls, and are primarily used in rope management.At the end of a line, Rope Stoppers serves as an easy-to-grab end knob, can be more reliable and effective than a stopper knot, and prevent the line from pulling through the sheave, fairlead, ferrule, or cleat.As part of overall rope management, Rope Stoppers serve to protect the eye splice and whipping twine used to terminate the line.Rope Stoppers will help the longevity and life of the line. Manufactured from Polypropylene plastic for durability and UV stability.Features: Perfect to put at the end of a piece of a line for increased grip. Prevents line from running through, jamming, or getting hung up on a variety of hardware. Helps in protecting all lines of all materials from damage. Color coded to help identify line usage.

Read more less

Deck Eye - Stainless Steel - 14mmStainless steel deck eyes with generous eye capacity.Specifications: Stainless Steel Deck Eye Single 14mm Height x 14mm Width x 5mm Fastenings

Read more less

Jaw/Jaw Open Body Turnbuckle - 1/2-20 ThreadFor those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our integral toggle jaw, provides positive locking and ease of adjustment.Forged silicon bronze bodies with 316 stainless ends offer a great non-galling combination. Integral toggle jaw eliminates the need for a separate rigging toggle. Specifications: Machine swage Bronze body/ 316 stainless ends Wire size: 5/16" Breaking strength: 10,500 pounds Safe working load: 4,200 pounds Thread size: 1/2-20 Pin to pin length: 11-1/2" (closed) 15-1/2" (open) Body length: 6-1/2" Pin diameter: 1/2"  Weight: 1 pound

Read more less

Stainless Steel Split Rings - 10mm - 10-PackFeatures: Easy-fit stainless steel split rings for use with our clevis pins Supplied in packs of 10 Specifications: Weight: 3g Dimensions: 30mm x 30mm x 4mm

Read more less

Compact Winch Handle MountThis low-profile, anti-snag mount gives you a handy yet unobtrusive place to store your winch handle.Compact Winch Handle Mount 21055. This low-profile, anti-snag mount gives you a handy yet unobtrusive place to store your winch handle.Features: Low profile For all locking winch handles

Read more less

Size 4 58mm Plain Bearing Pulley Cheek BlockThe Size 4 Barton range of blocks has a 58mm (2 5/16″) sheave. They are of a rugged construction featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-bearing components and interior frame are from marine grade 316 stainless steel and both plain and ball-bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball-bearing mainsheet traveler system.The 54mm sheave Size 4 range is of rugged construction, featuring high-grade molded side plates that are through-bolted and riveted for added strength and security. All load-carrying components and interior frame are from marine grade 316 stainless steel and both plain and ball bearing sheaves are available. This sleek and versatile range is engineered for use on larger cruising and racing yachts and is compatible with our ball bearing mainsheet traveller system.Suitable for up 12mm (7/16″) rope. Quick Guide (pdf)

Read more less

Series 7 Stand Up Ball Bearing Swivel Block - 2-3/8" 60mmSingle stand up ball bearing block. Stand up spring keeps block upright when not in use. Stainless steel base spreads load out and may be used with 97-49 backing plate. (sold separately) Delrin(tm) ball bearing sheave provides a low-friction high strength sheave. Sheave Dia. 2-2/8" (60 mm), Max Line 1/2" (13 mm), Dia. includes urethane base 3-3/8" (86 mm), Height 4-25/32" (120 mm), H2 2-15/32" (63 mm), Fastener Size (4),1/4" RH (6 mm), C/C 1-11/16" (43 mm), SWL 1700 lbs (771kg), Weight Alum. 11.7 oz (332 g).

Read more less

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications: 3/16" Wire 1/4" Pin 1" adj.

Read more less

Single Threaded Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.

Read more less

Spreader Flag Halyard KitIncludes 40ft. of polyester line, block with bail and shroud cleat.

Read more less