WindTrak AV Antenna Mount Wind VaneWindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system.WindTrak AV installs onto most whip antennas, including Metz and Shakespeare brands, with a whip diameter less than 1/8" (3 mm). Combine two installations into one to reduce masthead clutter, weight, and windage aloft. Rides on low-friction Teflon® bearings. Complete with 15" (38 cm) vane, reflective tacking arms, hardware, and instructions for easy installation. Antenna not included. Specifications: Instrument Function: Wind Type: Wind Indicator Box Dimensions: 3"H x 6"W x 18"L WT: 0.5 lbs UPC: 011698316007

Read more less

Series 40 Ball Bearing Block - Triple - Swivel HeadFeatures: Low friction Acetal or Torlon® bearing system Lightweight Cheek cut-outs for easy bearing maintenance Features a swivel shackle head for full 360° rotation Sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. The 2-stage ball bearing system provides consistent performance over the full load range.Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8m (26ft) Materials: Acetal ball bearings UV stabilised Acetal sheave Grade 316 stainless steel load strap and head fitting Impact and UV resistant, fiber reinforced Nylon cheeks

Read more less

Midrange Single BlockMidrange blocks’ robust construction makes them ideal to handle the high loads found on medium and large offshore boats. Sheave runs exclusively on a ball bearing system for fast trim and release under any load. Features:  Sheave: 76mm/3" Maximum Line: 14mm/9/16" Max Working Load: 1270kg/2800lbs

Read more less

12mm Bolt-Down Fairlead - SingleHarken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear.Specifications: Length (mm): 48 mm Length (in): 1-7/8 in Width (mm): 18 mm Width (in): 11/16 in Weight (g): 28 g Weight (oz): 0.99 oz Maximum line Ø (mm): 10 mm Maximum line Ø (in): 3/8 in Fasteners (mm): 6 SH mm Fasteners (in): 1/4 SH in Maximum working load (kg): 908 kg Maximum working load (lb): 2000 lb Breaking load (kg): 1816 kg Breaking load (lb): 4000 lb Height (mm): 28.2 mm Height (in): 1-1/8 in A (mm): 32 mm Center hole Ø (mm): 12 mm Center hole Ø (in): 15/32 in

Read more less

5/16 Stainless Steel Sail Snap +Features: Grade 316L stainless steel forged sail snaps Easy to install (single-handed operation) Efficient use: no jamming of the system Specifications: Materials: 316L stainless steel grade Length (mm): 110 Working load (kg): 960 Breaking load (kg): 1300 Weight (g): 244 A (mm): 24 B (mm): 15 Applications:Perfect to hoist a storm jib or a staysail

Read more less

FRX25 Friction Ring - 25mm (63/64")Features: Efficient and light FRX Wichard thimbles are efficient, light, and reliable Very strong and can be used for heavy loads and semi-static lines FRX thimbles are designed to make your lines run smoothly with minimum wear They are hard anodized (50 microns) for a longer lifespan Applications:Mast-foot block, barber-hauler, inhauler, loop, thimble, lazy jack, running backstay, tackle, and moreSpecifications: Materials: Anodized aluminium Working load: (lb) 11020 / (kg) 5000 Weight: (lb) 0.126 / (g) 57 A: (inch) 43/64" / (mm) 17 B: (inch) 63/64" / (mm) 25 C: (inch) 63/64" / (mm) 25 D diameter: (inch) 2 23/64" / (mm) 60 Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 Quick Guide (pdf)

Read more less

Releasable Elastic Tether with 2 HooksFeatures: OSR tether with overload indicator (following OSR - WORLD SAILING recommendations) 1 fluorescent double action safety hook and 1 quick opening snap shackle Elastic line from 1 to 2 m Overload indicator Applications: Safety onboard Compliant with OSR specifications (ISAF) Specifications: Materials Double safety snap hook in 316L stainless steel grade/Polyamide webbing Weight (lb) 0.767

Read more less

1/4 Eye Nut - 1/2" DiameterFeatures: A complete range of single piece forged products for fastenings applications Outstanding breaking loads Available in different sizes Applications: Various fastening applications Towing application Waterskiing lines attachment Specifications: 1/2" Diameter 1/4 Eye Nut

Read more less

Self-Locking D Shackle - Diameter 4mm - 5/32"Features: Self-locking D shackle forged in grade 316L stainless steel The pin is locked into one of the indentations No risks of loosening due to vibrations Outstanding working and breaking loads WLL: only for industrial applications (lifting i.e…) CE marking and batch number Applications: Standard applications of the shackle Attachment applications: blocks, head Specifications: Materials 316 stainless steel grade Working load (lb) 700 WLL (lb) 300 Breaking load (lb) 1540 Weight (lb) 0.015 Dimensions (see 2nd image) A (inch) 33/64" B (inch) 5/16" C (inch) 5/32" D (inch) 5/16" D diameter (inch) 5/32" E (inch) 1/8" F (inch) 29/32" G (inch) 25/32"

Read more less

Narrow Slotted Pin Shackle - 3/16" Pin - 13/32"L x 5/16"WFeatures: Slotted shackle pins are low profile to prevent snagging on ropes etc... Grade 316 Stainless Steel bodies and pins

Read more less

Wide Dee Shackle - 1/4" Pin - 1-17/32"L x 1-7/32"WFeatures: 1/4" pin diameter High strength to weight ratio

Read more less

Boom Hanger - 80mm(3-1/8") Internal Width125mm(5") long x 80mm(3-1/8") wideMaterial Diameter: 7.9mm(5/16"). Fixing Holes Diameter: 2 x 8.1mm(5/16")Applications:Typically used on dinghies, catamarans and small keelboatsMaterials:Grade 316 stainless steel Specifications: Color: Stainless Box Dimensions: 1"H x 4"W x 5"L WT: 0.3 lbs UPC: 9316800104260

Read more less

Sticky Race Gloves - 3-Finger - Black - XSFeatures: Synthetic leather for maximum durability, minimum stretch and shrinkage Double aramid stitched in high wear areas Double thickness palm and fingers for protection and grip Hook-and-loop wrist closure/adjustment Low cut wrist band for free movement and ClearStart™ watch visibility and operation Mesh panels for flexibility and comfort Mesh panels for flexibility, comfort and quick drying - now available in Grey Sticky gloves reduce fatigue by minimising the physical effort required to hold rope Applications:Used for hand protection and gripMaterials: 'Amara’ synthetic leather Double Aramid stitching Brochure (pdf)

Read more less

12 ST FS Self-Tailing Manual Single Speed Winch - Full StainlessPower Rib™ANDERSEN Winches feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What’s more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.Power RatioPower Ratio is the mechanical advantage of the winch and is calculated as follows:length of handle x gear ratio           radius of drumThe pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows: pull of handle (kg x Power Ratio = pull of winch (kg).This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.Specifications: Drum Ø D: 2-3/4" Base Ø B: 4-1/2" Height H: 5" Line Entry L: 1-3/4" Line Size: 5/16-9/16" Weight: 5.7lb Gear ratio 1st speed: 1.3 : 1 Power ratio 1st speed: 9.5 :1 Quick Guide (pdf)

Read more less

V-Cleat Open - Small - 3-6mm(1/8" - 1/4") Rope DiameterV-Cleats are a simple solution to cleating lines under moderate loads.Features: Lightweight and corrosion proof Greater abrasion resistance than traditional plastic cleats Low, snag free profile Base profile suits mounting on flat and curved surfaces Applications:Control lines on dinghies and catamaransMaterial:PTFE impregnated, glass and carbon fiber composite cleats Specifications: Color: Black Box Dimensions: 1"H x 2"W x 4"L WT: 0.1 lbs UPC: 9316800212972

Read more less

Series 75 Core Block™ - SingleCore Blocks™ are a true all round solution. A tuned 2-stage bearing system provides excellent performance across the full working load range with an integrated thrust bearing feature and the resilience to handle high dynamic or static loads. Acetal sheave, alloy cheeks and stainless fixings complete the durable package. For reliability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing.Universal BearingDynamic and high static load performanceThe Ronstan Universal Bearing incorporates our proven 2-stage bearing systemStage 1 - Under moderate loads, Acetal ball bearings ensure minimum friction.Stage 2 - Under heavy loads, where deformation of ball bearings alone would result in increased friction, a sliding Acetal bearing on a polished stainless steel race takes over, maintaining low friction performance.Additionally the ball bearings are configured to act as a thrust bearing between the sheave and cheeks, preventing the sheave from rubbing on the cheeks and causing friction when the line lead in and out of the block isn't perfect. Particularly important for cheek blocks.Alloy Cheek PlatesBlock cheeks are manufactured from the highest quality alloy for maximum strength. Material optimisation and the cut-away design minimises weight and allows easy fresh water rinsing of salt and debris from the bearings. Cheek design has been further styled with flaring at the block throat and reduced gap between the cheek and sheave, minimising rope wear.Universal headThe head assembly incorporates a brass bearing washer to provide smooth 360™ rotation of the post and shackle. A set screw arrangement allows the head to be locked at 0™ or 90™.Shackles are high quality forged grade 316 stainless steel.Features: Class leading performance and sleek, contemporary styling Excellent dynamic and high static load performance Less than half the friction of the nearest competitor Universal head with full 3-axis articulation Head posts can be locked at 0 or 90 degrees, by using a 2.5mm Hex/Allen Key Central hub hole can be used as a becket take-off or tie-up point Applications: Ideal for mainsheet, halyard and spinnaker sheet applications on boats to 14M (46') Various control line applications on larger yachts Materials: Sheave: U.V. stabilized Acetal Cheek body: Aluminium Alloy Ball Bearings: High compression strength carbon black Acetal Shackle, head post & hub: Grade 316 stainless steel Specifications:Sheave Ø: 75mm(3")Max. Rope Ø: 14mm(9/16")Pin Ø: 8mm(5/16")M.W.L.: 1,500kg(3,300lbs)B. L.: 3,000kg(6,600lbs)Weight: 354g(12.5oz)

Read more less

Snap Shackle - Large Swivel Bail - 73mm(2-7/8") LengthHeavy duty plunger springs and precision components ensure dependable service. Body and hasp profiles are designed for easy clearance of lines and fittings when released. High strength to weight ratio. Split ring on plunger pin is spot welded for security. A lanyard can be attached to the plunger pin for easy opening.Materials: Grade 15-5PH investment cast stainless steel body and hasp Grade 316 stainless steel plunger pin and spring

Read more less

8mm High Resistance "D" ShackleForged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter. High-Resistance (HR) shackles are forged in 17-4PH stainless steel to handle high loads. They have an "HR" imprint for easy identification.Specifications: Shackle pin: 8mm / 5/16in Weight: 56.5g / 2oz Maximum working load: 2330kg / 5130lb Breaking load: 4650kg / 10260lb

Read more less

Cat Hawk Wind Indicator for Non-Spin Catamarans up to 8MThe Cat Hawk is designed for non-spinnaker Catamarans up to 8m. It has been developed to mount onto the front of the Forestay Bridle where it is ideally situated for maximum visibility both upwind and downwind. The Cat Hawk uses the same Vane Arm as the Hawk with all the benefits of Balance, "V" Jewel bearing, weight and UV Protection that it brings. The reference arms can be set for either upwind or downwind angles. The Support Rod is aluminum and has the Hawk quick mount clip for quick rigging and de-rigging. Specifications: Vane Arm length 25cm (9.8") Weight 30 grams Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 2"H x 4"W x 13"L WT: 0.25 lbs UPC: 652773100304

Read more less

32mm Pin Genoa Car Track Pin Stop Standard Duty - BlackBarton Marine introduces its new sleek range of Genoa designed to run on 32mm (1 ¼”) T Track. All are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A black anodized finish is also available. Designed over 18 months to meet the requirements of OEMs, riggers, and sailing enthusiasts who want high performance and longevity captured in contemporary design. The new range is a class above the norm and features molded nylon inserts to prevent damage to the low-friction anodized finish and ensure smooth running in all marine environments. All Genoa Cars in this range are available in a heavy-duty HD version for large craft or for larger load applications.Features: Spectro or Black anodized finish The stainless steel plunger stops with positive action Moulded nylon slide inserts ensure free running Large, easy-grip plunger knobs with twist and lock facility Heavy-duty Genoa car options Brochure (pdf)

Read more less

32mm Pin Genoa Car Track Pin Stop Standard DutyBarton Marine introduces its new sleek range of Genoa designed to run on 32mm (1 ¼”) T Track. All are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A black anodized finish is also available. Designed over 18 months to meet the requirements of OEMs, riggers, and sailing enthusiasts who want high performance and longevity captured in contemporary design. The new range is a class above the norm and features molded nylon inserts to prevent damage to the low-friction anodized finish and ensure smooth running in all marine environments. All Genoa Cars in this range are available in a heavy-duty HD version for large craft or for larger load applications.Features: Spectro or Black anodized finish The stainless steel plunger stops with positive action Moulded nylon slide inserts ensure free running Large, easy-grip plunger knobs with twist and lock facility Heavy-duty genoa car options Brochure (pdf)

Read more less

18 ST FS Self-Tailing Manual Single Speed Winch - Full StainlessPower Rib™ANDERSEN Winches feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What’s more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.Power RatioPower Ratio is the mechanical advantage of the winch and is calculated as follows:length of handle x gear ratio           radius of drumThe pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows: pull of handle (kg x Power Ratio = pull of winch (kg).This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.Specifications: Drum Ø D: 2-3/4" Base Ø B: 4-3/4" Height H: 5-1/4" Line Entry L: 1-15/16" Line Size: 1/8-11/16" Weight: 7.0lb Gear ratio 1st speed: 2.6 : 1 Power ratio 1st speed: 18.8 :1 Quick Guide (pdf)

Read more less

40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless SteelIf you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look.From top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper & lower trim rings are manufactured in highest quality and beautifully polished grade 316 stainless steel. The dramatic result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say, “Full Stainless – Beyond Good Looks.”As with all ANDERSEN Winches™, our Full Stainless Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This model also uses our exclusive self-tailing device that automatically accommodates a wide range of different line sizes.MaterialsAndersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacture to further increase strength and hardness as it takes its final form. The resulting construction is lightweight, yet stiff and unyielding. Drive shafts are in grade 329 duplex stainless steel. Pawls are cut from a cold pressed profile in grade 316 stainless steel and are virtually unbreakable. The upper center stems are manufactured from aluminum bronze for ultimate durability. The combination of materials and design contribute to a lightweight, rigid final assembly that enhances. the mechanical efficiency of the winch. Andersen winces are of similar weight to winches with aluminum drums, but are far more durable. Power Rib™ANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.Power RatioPower Ratio is the mechanical advantage of the winch and is calculated as follows:length of handle x gear ratio        radius of drumThe pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg).This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.FeaturesAnderson winch drums incorporate the distinctive Power Rib which ensures a controlled grip on the line at all times, whether trimming or easing. The highly polished stainless steel surface minimizes vertical friction and allows the loaded rope turns to slide easily upward as the drum rotates, without the shuddering and excessive rope wear seen on winches that rely on a rough surface finish for grip. Stainless steel roller bearings and ball bearings carry the highest drum loads to the center stem of the winch, minimizing efficiency losses due to friction. The self tailing arm can be rotated through 360 degrees for optimum positioning (40ST and larger). Stainless steel self-tailing jaws adjust automatically to suit various rope sizes. Andersen winches are designed for simple, straightforward installation and maintenance. Servicing is only required every two years or so, under normal use. Specifications:Drum Ø:75mm(2-15/16")Base Ø:152mm(6")Height:174mm(6-7/8")Line Entry:71mm(2-13/16")Line Size:8-14mm(1/8 - 11/16")Weight;4.9kg(10.8lbs)Gear ratio 1st speed1.3 : 1Gear ratio 2nd speed:6.0 : 1Power ratio 1st speed:8.9 : 1Power ratio 2nd speed:40.0 : 1 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

30QT Orbit Winch with Quick TrimRonstan’s Orbit Winches™ are the new benchmark in high performance alloy winches. With a combination of fresh design thinking and proven manufacturing expertise, Orbit Winches™ weigh significantly less and offer lower line entry heights than any other winch in their class. Remarkably easy to service, they require no tools for disassembly or maintenance. The machined aluminium drums feature the same Power Ribs™ that many sailors will recognize from Andersen Stainless Steel Winches®, well-known for their impressive line grip, smooth control, and minimal rope wear.Power Ribs™The exceptional grip provided by the Power Ribs™ offers a multitude of benefits: requiring fewer wraps around the drum, reducing the load held in the self-tailer, and encouraging the line to slide easily upward on the drum to avoid riding turns. The non-abrasive drum surface extends the service life of running rigging and allows smooth and controlled easing, even under high loads.No Tools RequiredFull disassembly and reassembly can conveniently be performed without the need for any tools. To remove the drum, pull back the spring-loaded release latch, and a slight anti-clockwise rotation will allow the self-tailing arm to be lifted from the winch. From there, the drum can be removed from the winch's center stem. When completing reassembly in reverse order, an audible click confirms positive engagement between the self-tailing arm and bayonet notches on the center stem. These notches allow the self-tailing arm to be locked in one of eight positions at rotational increments of 45 degrees.Orbit Winches™ sizes 30QT and 40QT are equipped with the unique, patented QuickTrim™ self-tailer. What is QuickTrim™?QuickTrim™ allows sailors to conveniently and safely ease the line without removing the winch handle or taking the line out of the self-tailer.A small anti-clockwise rotation of the self-tailing cover allows the self-tailer to turn beneath it like a sheave as the rope is eased, with confident grip and control assured by the drum’s smooth surface and Power Ribs™.Letting the top cover spring back into place locks the self-tailer again to resume normal use.Features: Lightweight machined aluminum drum Distinctive Power Ribs™ ensures a controlled grip at all times, whether tensioning or easing Proven Andersen winch gearing configuration No tools are required for configuration and servicing Sprung self-tailing jaws to accept 6-10mm line QuickTrim™ patented self-tailing feature for rapid sail trim and smooth adjustment (30QT & 40QT only) Materials: Hard anodized aluminum drum and center stem, aluminum self-tailing arm Grade 316 stainless steel shaft and pawls Grade 2205 stainless steel axle pins Aluminum bronze gears Glass-filled nylon self tailer Self-lubricating acetal bearings Specifications: Weight (kilogram): 3.1kg Power Ratio: 30.2:1 Base Diameter (millimeters): 136mm Maximum Pulling Load (kilogram): 700kg Drum Diameter (millimeters): 86mm Base Diameter (millimeters): 136mm Height (millimeters): 166mm Line Entry L (millimeters): 57mm Line Size (millimeters): 7-12mm Gear Ratio 1st Speed: 1.4:1 Gear Ratio 2nd Speed: 5.2:1 Power Ratio 1st Speed: 8.3:1 Power Ratio 2nd Speed: 30.2:1 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

20ST Orbit Winch 1 SpeedRonstan’s Orbit Winches™ are the new benchmark in high performance alloy winches. With a combination of fresh design thinking and proven manufacturing expertise, Orbit Winches™ weigh significantly less and offer lower line entry heights than any other winch in their class. Remarkably easy to service, they require no tools for disassembly or maintenance. The machined aluminium drums feature the same Power Ribs™ that many sailors will recognize from Andersen Stainless Steel Winches®, well-known for their impressive line grip, smooth control, and minimal rope wear.Power Ribs™The exceptional grip provided by the Power Ribs™ offers a multitude of benefits: requiring fewer wraps around the drum, reducing the load held in the self-tailer, and encouraging the line to slide easily upward on the drum to avoid riding turns. The non-abrasive drum surface extends the service life of running rigging and allows smooth and controlled easing, even under high loads.No Tools RequiredFull disassembly and reassembly can conveniently be performed without the need for any tools. To remove the drum, pull back the spring-loaded release latch, and a slight anti-clockwise rotation will allow the self-tailing arm to be lifted from the winch. From there, the drum can be removed from the winch's center stem. When completing reassembly in reverse order, an audible click confirms positive engagement between the self-tailing arm and bayonet notches on the center stem. These notches allow the self-tailing arm to be locked in one of eight positions at rotational increments of 45 degrees.Features: Lightweight machined aluminum drum Distinctive Power Ribs™ ensures a controlled grip at all times, whether tensioning or easing Proven Andersen winch gearing configuration No tools are required for configuration and servicing Sprung self-tailing jaws to accept 6-10mm line Materials: Hard anodized aluminum drum and center stem, aluminum self-tailing arm Grade 316 stainless steel shaft and pawls Grade 2205 stainless steel axle pins Aluminum bronze gears Glass-filled nylon self tailer Self-lubricating acetal bearings Specifications: Weight (kilogram): 1.7kg Power Ratio: 18.3:1 Base Diameter (millimeters): 120mm Maximum Pulling Load (kilogram): 550kg Drum Diameter (millimeters): 75mm Base Diameter (millimeters): 120mm Height (millimeters): 124mm Line Entry L (millimeters): 42mm Line Size (millimeters): 6-10mm Gear Ratio 1st Speed: 2.7:1 Power Ratio 1st Speed: 18.3:1 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

40QT Orbit Winch with Quick TrimRonstan’s Orbit Winches™ are the new benchmark in high performance alloy winches. With a combination of fresh design thinking and proven manufacturing expertise, Orbit Winches™ weigh significantly less and offer lower line entry heights than any other winch in their class. Remarkably easy to service, they require no tools for disassembly or maintenance. The machined aluminium drums feature the same Power Ribs™ that many sailors will recognize from Andersen Stainless Steel Winches®, well-known for their impressive line grip, smooth control, and minimal rope wear.Power Ribs™The exceptional grip provided by the Power Ribs™ offers a multitude of benefits: requiring fewer wraps around the drum, reducing the load held in the self-tailer, and encouraging the line to slide easily upward on the drum to avoid riding turns. The non-abrasive drum surface extends the service life of running rigging and allows smooth and controlled easing, even under high loads.No Tools RequiredFull disassembly and reassembly can conveniently be performed without the need for any tools. To remove the drum, pull back the spring-loaded release latch, and a slight anti-clockwise rotation will allow the self-tailing arm to be lifted from the winch. From there, the drum can be removed from the winch's center stem. When completing reassembly in reverse order, an audible click confirms positive engagement between the self-tailing arm and bayonet notches on the center stem. These notches allow the self-tailing arm to be locked in one of eight positions at rotational increments of 45 degrees.Orbit Winches™ sizes 30QT and 40QT are equipped with the unique, patented QuickTrim™ self-tailer. What is QuickTrim™?QuickTrim™ allows sailors to conveniently and safely ease the line without removing the winch handle or taking the line out of the self-tailer.A small anti-clockwise rotation of the self-tailing cover allows the self-tailer to turn beneath it like a sheave as the rope is eased, with confident grip and control assured by the drum’s smooth surface and Power Ribs™.Letting the top cover spring back into place locks the self-tailer again to resume normal use.Features: Lightweight machined aluminum drum Distinctive Power Ribs™ ensures a controlled grip at all times, whether tensioning or easing Proven Andersen winch gearing configuration No tools are required for configuration and servicing Sprung self-tailing jaws to accept 6-10mm line QuickTrim™ patented self-tailing feature for rapid sail trim and smooth adjustment (30QT & 40QT only) Materials: Hard anodized aluminum drum and center stem, aluminum self-tailing arm Grade 316 stainless steel shaft and pawls Grade 2205 stainless steel axle pins Aluminum bronze gears Glass-filled nylon self tailer Self-lubricating acetal bearings Specifications: Weight (kilogram): 3.1kg Power Ratio: 39.5:1 Base Diameter (millimeters): 151mm Maximum Pulling Load (kilogram): 850kg Drum Diameter (millimeters): 86mm Base Diameter (millimeters): 151mm Height (millimeters): 166mm Line Entry L (millimeters): 57mm Line Size (millimeters): 7-12mm Gear Ratio 1st Speed: 1.4:1 Gear Ratio 2nd Speed: 6.8:1 Power Ratio 1st Speed: 8.3:1 Power Ratio 2nd Speed: 39.5:1 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless SteelIf you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look.From top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper & lower trim rings are manufactured in highest quality and beautifully polished grade 316 stainless steel. The dramatic result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say, “Full Stainless – Beyond Good Looks.”As with all ANDERSEN Winches™, our Full Stainless Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This model also uses our exclusive self-tailing device that automatically accommodates a wide range of different line sizes.MaterialsAndersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacture to further increase strength and hardness as it takes its final form. The resulting construction is lightweight, yet stiff and unyielding. Drive shafts are in grade 329 duplex stainless steel. Pawls are cut from a cold pressed profile in grade 316 stainless steel and are virtually unbreakable. The upper center stems are manufactured from aluminum bronze for ultimate durability. The combination of materials and design contribute to a lightweight, rigid final assembly that enhances. the mechanical efficiency of the winch. Andersen winces are of similar weight to winches with aluminum drums, but are far more durable. Power Rib™ANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.Power RatioPower Ratio is the mechanical advantage of the winch and is calculated as follows:length of handle x gear ratio        radius of drumThe pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg).This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.FeaturesAnderson winch drums incorporate the distinctive Power Rib which ensures a controlled grip on the line at all times, whether trimming or easing. The highly polished stainless steel surface minimizes vertical friction and allows the loaded rope turns to slide easily upward as the drum rotates, without the shuddering and excessive rope wear seen on winches that rely on a rough surface finish for grip. Stainless steel roller bearings and ball bearings carry the highest drum loads to the center stem of the winch, minimizing efficiency losses due to friction. The self tailing arm can be rotated through 360 degrees for optimum positioning (40ST and larger). Stainless steel self-tailing jaws adjust automatically to suit various rope sizes. Andersen winches are designed for simple, straightforward installation and maintenance. Servicing is only required every two years or so, under normal use. Specifications:Drum Ø:75mm(3-1/2")Base Ø:152mm(7-1/16")Height:174mm(8-1/4")Line Entry:71mm(3-9/16")Line Size:8-14mm(1/8 - 11/16")Weight;4.9kg(17.2lbs)Gear ratio 1st speed2.8 : 1Gear ratio 2nd speed:8.4 : 1Power ratio 1st speed:15.7 : 1Power ratio 2nd speed:47.1 : 1 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

28 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless SteelIf you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look.From top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper & lower trim rings are manufactured in highest quality and beautifully polished grade 316 stainless steel. The dramatic result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say, “Full Stainless – Beyond Good Looks.”As with all ANDERSEN Winches™, our Full Stainless Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This model also uses our exclusive self-tailing device that automatically accommodates a wide range of different line sizes.MaterialsAndersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacture to further increase strength and hardness as it takes its final form. The resulting construction is lightweight, yet stiff and unyielding. Drive shafts are in grade 329 duplex stainless steel. Pawls are cut from a cold pressed profile in grade 316 stainless steel and are virtually unbreakable. The upper center stems are manufactured from aluminum bronze for ultimate durability. The combination of materials and design contribute to a lightweight, rigid final assembly that enhances. the mechanical efficiency of the winch. Andersen winces are of similar weight to winches with aluminum drums, but are far more durable. Power Rib™ANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.Power RatioPower Ratio is the mechanical advantage of the winch and is calculated as follows:length of handle x gear ratio        radius of drumThe pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg).This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.FeaturesAnderson winch drums incorporate the distinctive Power Rib which ensures a controlled grip on the line at all times, whether trimming or easing. The highly polished stainless steel surface minimizes vertical friction and allows the loaded rope turns to slide easily upward as the drum rotates, without the shuddering and excessive rope wear seen on winches that rely on a rough surface finish for grip. Stainless steel roller bearings and ball bearings carry the highest drum loads to the center stem of the winch, minimizing efficiency losses due to friction. The self tailing arm can be rotated through 360 degrees for optimum positioning (40ST and larger). Stainless steel self-tailing jaws adjust automatically to suit various rope sizes. Andersen winches are designed for simple, straightforward installation and maintenance. Servicing is only required every two years or so, under normal use. Specifications:Drum Ø:70mm(2-3/4")Base Ø:125mm(4-15/16")Height:151mm(5-15/16")Line Entry:65mm(2-9/16")Line Size:8-14mm(1/8 - 11/16")Weight;3.9kg(8.6lbs)Gear ratio 1st speed1.3 : 1Gear ratio 2nd speed:4.0 : 1Power ratio 1st speed:9.5 : 1Power ratio 2nd speed:28.6 : 1 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Self-Locking Long D Shackle - Diameter 5mm - 3/16"Features: Self-locking long shackle forged in grade 316L stainless steel The pin is locked into one of the indentations No risks of loosening due to vibrations Outstanding working and breaking loads WLL: only for industrial applications CE Marking and batch number Applications: Standard applications of shackle requiring more length Attachment applications: blocks, head... Specifications: Materials 316 stainless steel grade Working load (lb) 880 WLL (lb) 440 Breaking load (lb) 2200 Weight (lb) 0.037 Dimensions (see 2nd image): A (inch) 1-9/64" B (inch) 25/64" C (inch) 13/64" D (inch) 25/64" D diameter (inch) 13/64" E (inch) 5/32" F (inch) 1-39/64" G (inch) 1-1/32"

Read more less

Size 2 Single Upright BlockPlain Bearing BlocksBarton plain bearing blocks have a precision molded acetal sheave running on a large diameter brass bearing, ensuring free running under the highest of loads.Specifications Sheave size: 35mm x 12mm Max rope diameter: 8mm Safe working load: 370kg / 815lbs Breaking load: 740kg / 1630lbs Length: 80mm Weight: 73g

Read more less

8mm Snap Close Shackle - 5 Pack Simply push the shackle together, but once it's snapped shut, it won't come undone again.Specifications: Material: Nylon Package Size: 5 included 

Read more less

Can Holder with HooksStore your drinks in this handy Blue Performance holder. Features: Attach and remove using Blue Performance screw-in hooks (not included) Holds for two cups, cans, or bottles Stylish reinforcement around the opening ensures durability Self-draining Waterproof, mildew, and UV-resistant material Specifications (L x W):PC3661: (inch) 8.5 x 5.1 x 3.5 / (mm) 215 x 130 x 90*Sold as an Individual Specifications: Type: Drink Holders Box Dimensions: 5"H x 6"W x 9"L WT: 0.85 lbs UPC: 8717933038414

Read more less

60mm Triple Aluminum Element Block with SwivelElement blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven journal bearing. So size for size, Element is priced significantly lower, than our previously least expensive blocks.Sideplates are hardcoat-anodized to resist corrosion. A tough composite bearing sheave resists corrosion for a long service life.Features: Sheave Ø (mm): 60 mm Sheave Ø (in): 2-3/8 in Maximum line Ø (mm): 14 mm Maximum line Ø (in): 9/16 in Maximum working load (kg): 1650 kg Maximum working load (lb): 3638 lb

Read more less

60mm Triple Aluminum Element Block with Swivel & BecketElement blocks introduce sideplates that combine forged aluminum and compound curves for strength. They are simultaneously contemporary and very robust. Element’s design pairs the minimum amount of metal required to protect the sheave with a proven journal bearing. So size for size, Element is priced significantly lower, than our previously least expensive blocks.Sideplates are hardcoat-anodized to resist corrosion. A tough composite bearing sheave resists corrosion for a long service life.Features: Sheave Ø (mm): 60 mm Sheave Ø (in): 2-3/8 in Maximum line Ø (mm): 14 mm Maximum line Ø (in): 9/16 in Maximum working load (kg): 1650 kg Maximum working load (lb): 3638 lb

Read more less

5mm Long ShackleForged stainless steel shackles are polished to a high luster and are stamped with the screw pin diameter.Long shackles have a similar shape to "D" shackles but are proportionally longer for their width.Specifications: Shackle pin: 5mm / 3/16in Weight: 22g / 0.78oz Maximum working load: 540kg / 1190lb Breaking load: 1080kg / 2380lb

Read more less

FRX6 Friction Ring - 7mm (9/32")Features: Efficient and light FRX Wichard thimbles are efficient, light, and reliable Very strong and can be used for heavy loads and semi-static lines FRX thimbles are designed to make your lines run smoothly with minimum wear They are hard anodized (50 microns) for a longer lifespan Applications:Mast-foot block, barber-hauler, inhauler, loop, thimble, lazy jack, running backstay, tackle, and moreSpecifications: Materials: Anodized aluminium Working load: (lb) 880 / (kg) 400 Weight: (lb) 0.004 / (g) 2 A: (inch) 7/32" / (mm) 5.5 B: (inch) 9/32" / (mm) 7 C: (inch) 23/64" / (mm) 9 D diameter: (inch) 45/64" / (mm) 18 Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual Quick Guide (pdf)

Read more less

Captive Pin D Shackle - Diameter 5mm - 3/16"Features: Captive pin "D" shackle forged in grade 316L stainless steel The pin is connected to the body at all times even when opened The pin is locked into one of the indentations No risks of loosening due to vibrations Outstanding working and breaking loads Applications: Standard applications of shackle Attachment applications: blocks, head... Specifications: Materials 316 stainless steel grade Working load (lb) 1050 WLL (lb) 660 Breaking load (lb) 3300 Weight (lb) 0.035 Dimensions (see 2nd image): A (inch) 5/8" B (inch) 25/64" C (inch) 15/64" D (inch) 7/16" D diameter (inch) 13/64" E (inch) 13/64" F (inch) 7/16" G (inch) 1-3/16" H (inch) 1-1/16"

Read more less

Captive Pin Twisted Shackle - Diameter 6mm - 1/4"Features: Captive pin twisted shackle forged in grade 316L stainless steel The pin is connected to the body at all times even when opened The pin is locked into one of the indentations No risks of loosening due to vibrations Outstanding working and breaking loads Single-handed operation for more safety Applications: Perfect for application where a 90° angle twist setup is required Often used to attach an unarticulated part (block on a rail) or on purchases Specifications: Materials 316 stainless steel grade Working load (lb) 1320 Breaking load (lb) 4620 Weight (lb) 0.086 Dimensions (see 2nd image): A (inch) 1-47/64" B (inch) 15/32" C (inch) 9/32" D (inch) 35/64" D diameter (inch) 15/64" E (inch) 15/64" F (inch) 2-23/64" G (inch) 1-7/32"

Read more less

Dinghy Control Line - 6mm (15/64") - Yellow - 328' Spool - DC-6YDinghy Control is an all-around high-tech control line that comes in various colors and diameters. This line excels due to the colored Dyneema® SK78 core which allows you to stay on top of things even in case of complex handling systems.Specifications: Core: Dyneema® SK78 Cover: Polyester 16 Field of use: Crossover Dyneema® Control Line

Read more less

Lyf'Safe Jackline Kit - 8.5M/27'Either sailing solo or fully crewed, operating on the foredeck in most conditions requires extra attention and safety precautions. Lyf'Safe by Wichard is a complete jackline kit allowing safer operations and offering added value to the crew.Why Choose Lyf'Safe?Adaptable and universal: Lyf'Safe can be tailored to the length of the boat (using the adjuster) and can be fitted onto most deck fastenings (pad eyes, pullpit, pushpit, cleats...).Features: Ready-to-use: easy to install, Lyf'Safe does not require additional fastening components such as shackles. Reflective: thanks to its reflective stripe and photoluminescent casings, Lyf'Safe can be easily identified when sailing at night. The locking system of the webbing: the adjuster casing prevents any accidental adjustment or release of the webbing. Resistant: the anti-abrasion edges to the webbing prevent early wear and fraying. Aesthetic: Lyf'Safe is an elegant solution suiting most modern deck designs. Anti-chafing: the soft elastomer casing isolates the deck, eliminating noise and unpleasant vibrations. Lyf'Safe Includes: 2 webbings (material: polyester) with 1 end with a loop and 1 free end 2 forged adjusters 2 casings Technical Specifications: For boats less than 9.30 m (30') Webbing length: 8.5 m (27') Webbing width: 25 mm Sewing resistance: 3 tons Applications:Safety on board

Read more less

Quick Release Pin - 1/4" x 2" GripQuick Release Pin, 1/4" x 2.0" Grip. 316 Stainless Steel. Safe Working Load 3000 lbs.

Read more less

Clevis Pin - 9.5mm(3/8") x 31.9mm(1-1/4")Grade 316 Stainless SteelPack of 1

Read more less

Series 55 Ball Bearing Orbit Block™ - Single - Becket - Swivel HeadLightweightKilogram for kilogram of working load, BB and RT Orbit Blocks™ are the world's lightest. The unique orbital design allows the bearing to only be in the active areas of the floating sheave. This minimises the mass of the inactive return race and hub.Weight and bulk are further reduced in the different block configurations. The ball bearing single and becket block has a through-sheave becket arrangement. The result? The lowest weight possible.Multi-sheave blocks have only single intermediate cheeks and an ultra-light and efficient head arrangement. This gives a 30% weight saving advantage over the nearest competitor. Other brands just link together their single blocks. This results in unnecessary double cheeks between each sheave, held together by a heavy steel channel across the top of the block. Highest Working Load In Its ClassThe orbital ball-bearing arrangement gives the largest possible bearing race diameter. This maximises load performance. The proven Ronstan 2-stage bearing system features high compression grade acetal ball bearings and a secondary full-contact bearing. This gives minimum friction across the full working load range. The floating sheave and bearing system is supported by a fiber-reinforced load frame. The design was computer modelled to be stress optimised. The Dyneema® Link is produced from FSE Robline SK75 fiber, which is 10 times stronger and lighter than steel, and provides the final connection from the block to the load point.Features: Ultra Lightweight Low friction 2-stage Orbital ball bearing system Highest working load in its class Low profile and compact High performance cleating Swivel shackle head for unlimited block rotation Stainless steel shackle head for ultimate durability and compatibility with harsh fixing points Ultra low profile integrated becket Applications: Mainsheet systems on dinghies, sportsboats and small keelboats to 9M(30') Spinnaker sheets on dinghies, sportsboats and small keel boats to 9M(30') Halyard, Vang and Backstay application on boats to 8M(26') Control line applications on larger yachts Ideal use for mainsheet systems and spinnaker sheets on dinghies, sportsboats and small keel boats to 9M(30') Also ideal with halyard, vang and backstay applications on boats to 8M(26') Spinnaker sheets on sportsboats and small keel boats (lateral lead blocks) Control line applications on larger yachts Materials: Ball bearings - High compression strength carbon black Acetal Stage 2 bearing - Carbon fiber reinforced, PTFE impregnated Nylon Frame/Cheeks - Toughened, glass fiber reinforced Nylon Rope Link: UV stabilized, multi-strand impregmented SK75 Dyneema® Sheave: Carbon fiber reinforced, PTFE impregnated Nylon Head fitting: Grade 316 stainless steel. Specifications:Sheave Ø: 55mm(2-5/32")Max. Rope Ø: 10mm(3/8")M.W.L.: 500kg(1,100lbs)B. L.: 1,000kg(2,200lbs)Weight: 88g(3.1oz)

Read more less

25mm T-Track Genoa Car - BlackBarton Marine introduces its sleek range of Genoa Cars designed to run on 25mm (1 ”) T-Track. All GT cars are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A black anodized finish is also available. Designed over 18 months to meet the requirements of OEMs, riggers, and sailing enthusiasts who want high performance and longevity captured in contemporary design. The range is a class above the norm and features moulded nylon inserts to fight corrosion prevent damage to the low friction anodise finish and ensure smooth running in all marine environments.Features: Spectro anodized finish or black anodized The stainless steel plunger stops with positive action Moulded nylon slide inserts ensure free running Large, easy-grip plunger knobs Twist and Lock up plunger facility Brochure (pdf)

Read more less

Tufnol Snatch Block for Wire & Fibreoptic CablesThe Barton wire snatch block has been developed specifically as a low maintenance static free block. The Tufnol sheave means that static cannot build up in the block and cause electrical discharge. Tufnol is a bearing-grade material so it gives a low-friction surface for the wire to run on and minimizes the number of moving components, giving it reliability and durability. The cheeks are made from marine grade 316 stainless steel as is the pin and retaining nuts. This block is ideal for commercial applications in the toughest of environments.Specifications: Safe Working Load: 350kg (770lbs) Break Load: 1500kg (3300lbs) Max Rope/Wire size: 10mm (3/8”) Weight: 78grms (2.8oz) Length: 190nn (7 ½”) Width: 115mm (4 ½”) Thickness (Maximum): 53mm (2 1/16”) Fibreoptic & Wire BendingFibreoptic cables and wire ropes require a minimum bend radius to stop failures. This block is suitable for both fibreoptics and wires up to 10mm in diameter. The large sheave means that the bend radius of the wire is not compromised and provides an additional engineered safety factor to prologue the life of wire if continual movement around the same section of wire is required. Brochure (pdf)

Read more less

25mm T-Track Genoa CarBarton Marine introduces its sleek range of Genoa Cars designed to run on 25mm (1 ”) T-Track. All GT cars are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A black anodized finish is also available. Designed over 18 months to meet the requirements of OEMs, riggers, and sailing enthusiasts who want high performance and longevity captured in contemporary design. The range is a class above the norm and features moulded nylon inserts to fight corrosion prevent damage to the low friction anodise finish and ensure smooth running in all marine environments.Features: Spectro anodized finish or black anodized The stainless steel plunger stops with positive action Moulded nylon slide inserts ensure free running Large, easy-grip plunger knobs Twist and Lock up plunger facility Brochure (pdf)

Read more less

Symmetric Carbine Hook - Length 60mm - 1/4"Features: Grade 316L stainless steel carbine hooks Symmetrical shape With eye to attach a webbing or a splicing Applications:For fastening applications Specifications: Materials 316L stainless steel grade Length (inch) 2-23/64" Working load (lb) 790 WLL (lb) 260 Breaking load (lb) 1320 Weight (lb) 0.066 Dimensions (see 2nd image): A (inch) 25/64" B (inch) 9/32" D diameter (inch) 15/64"

Read more less

US Sailing Offshore Single Tether - 6'Features: Tether with 1 double action safety hook and 1 stainless steel snap hook - Elastic webbing - 2m Automatic closing and opening mechanism The Proline generation has been designed to offer you the highest level of safety at sea Double safety hook Wide opening: 26 mm V-Nose feature (patented): easy hooking and unhooking High-quality elastic webbing: Retro-reflective and visible at night Compact and light Exclusive feature: SmartLoop The product can adapt to suit all needs and users. SmartLoop lets you turn a single webbing tether into a double webbing tether, turn a double webbing tether into two single webbing tethers Material: Anodized aluminum hook offering lightweight and mechanical and corrosion resistance. Regulations:  Compliance with ISO 12401:2009 and WORLD SAILING regulations (OSR) Overload indicator on all models Applications:Safety on board

Read more less