Large Wincher PairThe Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch.  This tried and tested design has been a firm favorite with Sailors for many years.The Wincher works by gripping the rope when the drum is fully loaded and under tension, peeling off the line from the underside of the Wincher as you winch to give a true self-tailing motion.Cleating is achieved by locking the sheet into the Wincher’s ribbed central groove.Technical Specifications: Fits Drum Diameter - 3" to 3.5" (76.2 to 88.9 mm) Maximum Rope Diameter - .47" to .55" (12 to 14 mm) Weight - 9.8 oz (278 g)  *Sold as a Pair Brochure (pdf)

Read more less

Extra Large Wincher PairThe Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch.  This tried and tested design has been a firm favorite with Sailors for many years.The Wincher works by gripping the rope when the drum is fully loaded and under tension, peeling off the line from the underside of the Wincher as you winch to give a true self-tailing motion.Cleating is achieved by locking the sheet into the Wincher’s ribbed central groove.Technical Specifications: Fits Drum Diameter - 3.5" to 4" (90 to 100 mm) Maximum Rope Diameter - .47" to .63" (12 to 16 mm) Weight - 13.65 oz (387 g)  *Sold as a Pair Brochure (pdf)

Read more less

Drain Plug - Black 15mm (19/32")This screw-type black drain bung is still among the best available. Supplied with rubber `O' ring for a watertight seal.Specifications: Length: 15mm (19/32") weight: 7gm(.23oz)

Read more less

Transom PintleManufactured from stainless steel with tough nylon surrounds. A wide range of rudder fitting widths are available.Features: Pintle Diameter: 9.5mm Fastenings Diameter: 5mm Weight: 70g

Read more less

40ST EVO® Self Tailing Winch Alloy - ChromeAn evolution of the renowned Lewmar Ocean winch, the EVO® Self-Tailing Winch draws on a wealth of design and manufacturing experience to produce a state-of-the-art winch. Features: Easy Servicing – no tools required User-friendly direction arrows Convertible to electric Technical Specifications: Drum Diameter - 2.91" Base Diameter -  5.83" Height - 6.24" Line entry - 3.11" Line size: - .32" - .5" Gear Ratio 1st Gear - 1.9:1 Gear Ratio 2nd Gear - 5.8:1 Power Ratio 1st Gear  - 13.2:1 Power Ratio 2nd Gear - 40:2:1 SWL - 1753lbs Weight - 10.7lbs In the Box: Winch Instruction manual *Sold as an Individual Owner's Manual (pdf)

Read more less

40mm Carbo Block 90° Fixed HeadLow-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Features: Sheave Ø (mm): 40 mm Sheave Ø (in): 1-9/16 in Maximum line Ø (mm): 10 mm Maximum line Ø (in): 3/8 in Maximum working load (kg): 220 kg Maximum working load (lb): 485 lb

Read more less

Micro Carbo-Cam Base with BullseyeMicro Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base.Specifications: Height: 22mm / 7/8in. Weight: 50g / 1.75oz Minimum line: 3mm / 1/8in Maximum line: 6mm / 1/4in Fastener spacing: 27mm / 1-1/16in Fasteners: 4 FH mm / #8 FH in Maximum working load: 68kg/ 150lb

Read more less

Series 40 High Load Exit Box for Single Rope or WirePlain bearing sheaves are ideal for halyards and other applications where high static loads are likely to be encounteredApplications:Ideal applications where lines (rope or wire) need to be led through decks, bulkheads or spars minimizing friction and chafingMaterials: Nylatron&regl sheave Grade 316 Stainless Steel cheeks Specifications:Sheave Ø: 40.0mm(1-9/16")Max. Rope Ø:10.0mm(3/8")Max. Cable Ø: 5.0mm(3/16")B.L.: 1,000kg(2,200lbs) Specifications: Color: Stainless Box Dimensions: 2"H x 3"W x 4"L WT: 0.2 lbs UPC: 9316800335121

Read more less

HR Quick Release Snap Shackle With Large Bail - 80mm Length - 3-5/32"Features: HR forged (17.4 PH) quick-release snap shackle with large bail The opening is made by pulling the lanyard Perfect to attach several lines (spinnaker sheets...) Outstanding working and breaking loads Free rotation of the snap shackle thanks to the swivel Applications: For spinnaker operations Perfect to attach several lines: spinnaker sheets... Specifications: Materials: HR 17.4 PH stainless steel grade Working load: (lb) 1940 / (kg) 880  Breaking load: (lb) 2860 / (kg) 1300  Weight: (lb) 0.119 / (g) 54  Dimensions: A: (inch) 35/64" / (mm) 14  B: (inch) 3/4" / (mm) 19  Length: (inch) 3 5/32" / (mm) 80  Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 High Resistance (HR) *Sold as an Individual Quick Guide (pdf)

Read more less

Eye strap - 10mm Diameter - 25/64" - 78mm Spacing - 3-5/64"Features: Complete range of drop-forged saddles with high-quality stainless steel (316L) Outstanding strength The round shape reduces the wear of the components connected to them (straps, ropes...) Applications: Fastening applications  Attachment of straps & cordage Specifications: Materials: 316L stainless steel grade Breaking load: (lb) 15430 / (kg) 7000  Weight: (lb) 0.165 / (g) 75  Dimensions: A: (inch) 25/32" / (mm) 20  B: (inch) 1 1/32" / (mm) 26  D diameter: (inch) 25/64" / (mm) 10  E: (inch) 3 5/64" / (mm) 78  Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual Quick Guide (pdf)

Read more less

MXLEvo 16 - Soft Block - 16mm Rope Size - 11/16"Features:  MXLEvo: A soft block solution designed for all yachtsmen, amateur or pro. Designed for heavy-load applications, this system is available in three sizes Economical and easy to use: Delivered complete with a Dyneema SK78 loop, you don't need any specific technical knowledge to use the MXLEvo. It can be installed quickly and easily on any type of anchoring (chain plate, head ropes, etc.). The rope housing keeps the ropes inside the block when there is no load on the system  The MXLEvo offers excellent value for money. It is one of the cheapest soft blocks on the market Heavy load applications: The MXLEvo is designed to be used with heavier loads (low rope movement speed). As such, it is the perfect solution for use as a mast foot block, halyard tackle, barber hauler, block and tackle, sheet return, large sail, foot, etc. Lightweight, robust, and highly compact, the MXLEvo provides exceptional resistance for its weight. In comparison with a standard competitor's block, The MXLEvo 16 is: twice as robust, half the weight, a 35% lighter rope with a stronger breaking load A reliable solution with no need for maintenance: As it does not contain any moving parts (such as a sheave), the MXLEvo is highly reliable and requires no maintenance Adaptable to your deck plan: The loop on the MXLEvo can be positioned in one of two ways, making it easily flexible to your deck and to whatever anchoring point or chain plate alignment you choose Applications: Mast foot block Halyard block Barber hauler Purchase Tackle Sheet return Mainsail outhaul Snatch block (in that case it is recommended to use an 8 mm rope size) Specifications:  Materials: Duplex stainless steel grade S78 Dyneema Rope size: (inch) 11/16" / (mm) 16 Dimensions: Length: (inch) 1 27/32" / (mm) 47  Width: (inch) 2 23/64" / (mm) 60  Thickness: (inch) 1 39/64" / (mm) 41  Loop diameter: (inch) 15/64" / (mm) 6  Loop length: (inch) 10 5/8" / (mm) 270  Working load: (lb) 5510 / (kg) 2500  Breaking load: (lb) 11020 / (kg) 5000  Weight: (lb) 0.309 / (g) 140  Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual Quick Guide (pdf)

Read more less

Self-Locking Bow Shackle - Diameter 10mm - 13/32"Features: Self-locking bow shackle forged in grade 316L stainless steel The pin is locked into one of the indentations No risks of loosening due to vibrations Outstanding working and breaking loads WLL: only for industrial applications (lifting i.e…) CE marking and batch number Applications: To be used when ample room is required Possibility to attach several lines or cables Specifications: Materials 316 stainless steel grade Working load (lb) 3350 WLL (lb) 1890 Breaking load (lb) 9470 Weight (lb) 0.302 Dimensions: A (inch) 1-27/32" B (inch) 25/32" C (inch) 25/64" D (inch) 25/32" D diameter (inch) 25/64" E (inch) 23/64" M (inch) 2-3/64"

Read more less

RF4055 ClearStart™ 50mm Sailing Watch - Blue/GreyInnovative Race Functions with Bold StylingRonstan has taken the popular 50 mm (2") size and features you love and added more durability, comfort, and ease of use to our design. Ronstan’s ClearStart™ race timer and watches combine contemporary styling with true sailing functionality. They feature large buttons, easy to read displays and advanced intuitive programming designed specifically with the racing sailor in mind. Developed with input from some of the world’s top sailors, ClearStart™ watches and timers are sure to set the standard for years to come. If you’re looking for a simple competitive edge, the difference is ClearStart™.Features: Acrylic lens replaced by mineral crystal lens for improved clarity and durability Lens recessed in the case to improve impact resistance Glass-reinforced polycarbonate case now more durable A more flexible injection molded silicone band, which is more comfortable and more durable Lower profile and textured "easy-find" buttons Bold styling helps the 50mm ClearStart™ range stand out from the crowd Time, hours/minutes/seconds – 12 or 24 hour format Month/day or day/month format Daily alarm Chronograph - including hours and time of the day Luminescent backlight Battery saving mode – light can be turned off Shock resistant Specifications: Time, hours/minutes/seconds – 12 or 24 hour format Month/day or day/month format Daily alarm Chronograph - including hours and time of the day Luminescent backlight Battery saving mode – light can be turned off Shock resistant Race Mode: Multiple start sequence options – World Sailing 5,4,1,0, match racing, user set SYNChronization function – resynchronize if you start the countdown late Multi-line display – start sequence + time Loud intuitive countdown and start sound signals Countdown repeat, or count down and up (for elapsed race time) Separate fast access race and time mode scrolling Water resistant to 5 ATM (50m/150ft) The RF4055 models will have the popular ClearStart™ race sequence functions, as well as daily-life functionality.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Watches Box Dimensions: 3"H x 3"W x 5"L WT: 0.2 lbs UPC: 9316800574612 Quick Guide (pdf)

Read more less

Waxed Whipping Twine - 0.8mm x 40M - BlueExcellent for whipping line ends, this twine is pre-waxed with a round construction and will not open because of the flat, strong seam. The special wax formula makes this whipping twine particularly easy to use with the high quality of the twisted PES (polyester) twine.Technical Specifications: Color - Blue Material - Polyester (PES) Thickness -  .03" (.8mm) Length -  131' (40 M) *Sold as an Individual Brochure (pdf)

Read more less

Folding Pad Eye - Diameter 5/16"Features: Perfect solution for fastening applications (stay, blocks, jib tack point, lifeline, tether, etc...) Fully drop-forged product with outstanding working and breaking loads regardless of the angle of the load Modern and optimized design to suit the aesthetics of modern boats They can be folded down to minimize the risk of injuries The silicon pad eliminates noise and unpleasant vibrations Modern design Applications:For any fastening/attachment application: shroud, stay, blocks, lifeline, jib tack point, etc…)Specifications: Materials 17.4 pH stainless steel/316L stainless steel grade Working load (lb) 5290 Breaking load (lb) 11020 Weight (lb) 0.364 A (inch) 2 1/4" B (inch) 1 3/8" C (inch) 45/64" D (inch) 2 21/64" d diameter (inch) 5/16" D diameter (inch) 5/16" E (inch) 2 1/64" F (inch) 1 3/8"

Read more less

Series 20 Ball Bearing Block- Single, Stand-Up Loop TopFeatures: Low friction High static and dynamic load capacity Lightweight Precision molded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high performance & low friction.Applications: Dinghy control lines Dinghy vangs Cunninghams Traveler controls Materials: Stainless steel ball bearings UV stabilized Acetal sheave Grade 316 stainless steel load strap and head fitting Impact and UV resistant, fiber reinforced Nylon cheeks

Read more less

Series 40 All Purpose Block - Single - Stand UpAll purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing. Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required.Features: Exceptionally high working loads Low maintenance, long service life Self-lubricating sheave Captive Lock™ universal head Mount with 2 x 5mm (3/16") fasteners (not supplied) Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26') Materials: U.V. stabilized Acetal sheaves Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel bearing race Grade 316 stainless steel load strap and head fitting Specifications:Sheave Ø: 40mm(1-9/16")Max. Rope Ø: 10mm(7/16")M.W.L.: 400kg(880lbs)B. L.: 800kg(1,760lbs)Weight: 72g(2.5oz)

Read more less

F25 Splicing Needle w/Puller - Large 6mm-8mm(1/4"-5/16") LineA range of specialised rope splicing needles for sailors and riggers.They are specifically designed for use with modern synthetic fibres and ropeconstructions, in particular small line sizes where conventional fids/needles don't work.Features: "Pull-through" operation Unique double needle clamps the line making it easy to pull through Ideal for making "soft shackles" Ideal for pulling cover plaits into the core for making tapered sheets Sizes available for lines from 2mm (1/16") diam. to 8mm (5/16") diameter Fixed handle with wire running around full length for maximum strength

Read more less

WindTrak 10 Sport Wind VaneWith the introduction of the WindTrak 10 Sport, WindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia van, and easy-to-read, fully adjustable tacking tab system.Reflector tape on the vane and tacking tabs make WindTrak 10 Sport easy to see day and night. WindTrak vanes are sturdy and when installed properly, offer many years of use. They have been wind tunnel tested to wind speeds of 80 knots! WindTrak 10 Sport has a 10" (25 cm) vane. Includes glass reinforced polycarbonate J-Base for side, top or front of mast mounting on most dinghies, smaller boats and sport boats. Stands just 9.25" (23.5 cm) tall and weighs 1.2 ounces (31 g). Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 2"H x 3"W x 12"L WT: 0.2 lbs UPC: 011698001934

Read more less

Rigging Toggle - 3/8" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too short. Ultimate strength exceeds the corresponding clevis pin. All sizes include pins. Please see the attached chart for the exact dimensions.

Read more less

Handy Lock Turnbuckle Jaw/JawThe 01 Series Handy Lock turnbuckle is one of our oldest products and still stands the test of time. Neat and compact and positively locked without cotter pins or check nuts, the Handy Lock has all the features needed for easy adjustment in a compact package. There are no sharp points to catch lines or tear sails, just flip the lever up to adjust and down to lock. Use the Handy Lock anywhere an easily adjusted turnbuckle is needed.Specifications: Approximate breaking strength = 2,500lbs Safe Working Load = 1,000lbs Thread Size = 1/4-28

Read more less

Quick Release Lever - 1/4" PinThe Johnson Hyfield-type lever has several very practical features that have been developed after extensive testing on both high-performance multi-hulls and monohulls. The fitting is rugged, having an ultimate strength of 2500 lbs. A positive stop is provided to prevent jamming fingers between the fitting and wire when thrown open under load and the large surface area of the push pad makes it easier to close the lever under load. Lever take-up is 2-1/8″ to an over-center position and comes with a quick-release pin for positive locking. The extender arm may be had in either 1/4″ or 5/16″ pin size. This is an essential piece of hardware on Catamaran shrouds to allow the crew to right the boat after a capsize. Without it, another boat or extraordinary effort is required. Trailer-able boats up to 26 feet find that a lever on the forestay greatly facilitates stepping and unstepping the mast.Specifications: Approximate breaking strength = 2,500lbs Safe working load = 1000lbs Extender number of holes = 3

Read more less

Quick Release Shroud Adjuster - 1/4" PinDeveloped for dry-sailed one-design dinghies. When the quick-release pin is pulled, easy adjustment can be obtained. 1/4″ pin.Specifications: Pin-to-pin adjustment: 1-3/4″ to 3-5/8″ Safe working load: 400 lbs.

Read more less

"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" & 5/16" Chain with 12' of 1/2" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely All T-316 stainless. Version with 3-strand nylon line includes professional eye splice.Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.

Read more less

Splice Line Gate Kit - Midship for One SideC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits. Specifications: 1 x LS-3100 Over Center Gate Hook w/ Splice Eye 1 x LS-3200 Splice Eye to Splice Eye Fitting 1 x LS-3300 Gate Eye to Splice Eye Fitting 1 x LS-3400 Adjuster w/ Splice Eye 6' Dyneema

Read more less

Splice Eye with Threaded Stud: 5/16"-24 x 2-1/2" LH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.

Read more less

Pulpit Anchor for 1" RailThis fitting can be used on the stern rail and bow pulpit to terminate jaw fittings for lower or upper life lines. (1/2" hole). The hole will not accept cast gate hooks. 

Read more less

Mini Gate Hook with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.

Read more less

Snap Gate Hook - Body Only - 5/16" - 24 Left HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook. Specifications:5-16"-24 LH

Read more less

Interlocking Swivel Gate Eye for 3/16" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.

Read more less

Wrap Pins Hook & Loop Pin Locking Devices for Open Body Turnbuckles 7/16" & 1/2" - 2-PackWrap Pins are neat hook and loop locking devices used to secure turnbuckles without messing with unruly cotter pins. Just make your adjustment, push the pin attached to the hook and loop through the hole and wrap the hook and loop strip around the turnbuckle body. Works on open body turnbuckles and Johnson's positive locking, slotted tubular turnbuckles. This size works for 1/8" diameter for 7/16", 1/2", and 5/8" threads.

Read more less

Toe Rail Folding CleatThe toe rail folding cleat makes a perfect movable, mid-ship cleat for spring lines, fenders, and more! This cleat is mountable on all aluminum toe rails. The rail is protected by a silicon rubber pad for rattle free installation. The cleat folds out of the way when not in use, the husky 3/8" diameter cleat assures strength. The complete unit is T-316 stainless. Fits most symmetric and asymmetric aluminum toe rails.Safe working load: 2,000 lbs

Read more less

Hinged Pad Eye- 1/4"C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free. Specifications: T-316 Stainless Steel construction Supplied with backing plate Specifications: Color: Stainless Box Dimensions: 1"H x 4"W x 7"L WT: 0.25 lbs UPC: 762799485801

Read more less

Rigging Tape - White - 1" x 15'C. Sherman Johnson has brought back the self-amalgamating rigging tape that started the craze in the 70's. This tape works well at covering up those exposed cotter pins or any sharp objects that may harm sails, lines, or people. When used as directed, the tape actually bonds to itself and makes one solid piece. It can also be used on hot objects for an emergency repair or radiator hoses, etc. Rigging tape is sold in black or white and packaged in a reusable, retail clamshell pack with color header and instructions.  Specifications: Color: White Box Dimensions: 2"H x 5"W x 7"L WT: 0.25 lbs UPC: 762799501150

Read more less

Safe Lock Gate Hook T-316Features: Stainless, safe, inexpensive design Practical Sailor called a "well-engineered hunk of metal"  Adjusts in place with knurled nut Stamped metal construction 3/4 in. long from end of body to inside bearing point of hook Specifications: 3/16" wire 1/4"-28 L.H. 1-1/4" adj.

Read more less

Diamond Pad Eye - Round - 98mm Length (3-55/64") - M8 ScrewFeatures: Mechanical resistance versus corrosion resistance ratio Optimized dimensions For M8 screw Applications: Mast foot blocks  Reefing blocks Various fastenings Specifications: Materials: Duplex stainless steel grade Working Load: (lb) 9259.4 / (kg) 4200 Breaking Load: (lb) 24691.7 / (kg) 11200 Weight: (lb) 0.551 / (g) 250 W.L 1 (90 degrees): (lb) 9259.4 / (kg) 4200  W.L 2 (45 degrees): (lb) 9259.4 / (kg) 4200  W.L 3 (0 degrees): (lb) 9038.9 / (kg) 4100  B.L 1 (90 degrees): (lb) 24691.7 / (kg) 11200  B.L 2 (45 degrees): (lb) 24691.7 / (kg) 11200  B.L 3 (0 degrees): (lb) 24250.8 / (kg) 11000  Dimensions: A: (inch) 3 55/64" / (mm) 98 B: (inch) 2 7/8" / (mm) 73 C: (inch) 2 21/64" / (mm) 59 D: (inch) 1 3/8" / (mm) 35 E: (inch) 55/64" / (mm) 22 F: (inch) 1 1/16" / (mm) 27 Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual Quick Guide (pdf)

Read more less

MPPT WireBox-S 75-10/15The MPPT WireBox provides an extra level of safety and is particularly useful if your MPPT Solar Charger is installed in a general access area. It covers all DC terminals, preventing accidental or inquisitive contact with terminal screws.

Read more less

MPPT WireBox-XL Tr 150-85/100 & 250-85/100The MPPT WireBox provides an extra level of safety and is particularly useful if your MPPT Solar Charger is installed in a general access area. It covers all DC terminals, preventing accidental or inquisitive contact with terminal screws.Please contact your dealer for any returns, repairs or support issues related to this product.

Read more less

MPPT WireBox-L Tr 150-60/70 & 250-60/70The MPPT WireBox provides an extra level of safety and is particularly useful if your MPPT Solar Charger is installed in a general access area. It covers all DC terminals, preventing accidental or inquisitive contact with terminal screws.

Read more less

Series 40 Ratchet Orbit Block™ - Single - Auto - Swivel Shackle HeadAutomatic RatchetWith automatic models, the ratchet mechanism engages when load is applied, but switches off when it's released. This lets the sheet run out smoothly and freely-great for rapid easing of the sheet and for gybing asymmetric spinnakers.Awesome Ratchet Block Holding PowerQuite simply, Ronstan Ratchet Orbit Blocks™ have the highest holding power available. The sophisticated NC-machined sheave features Generation 2 of our sheave cross-hole geometry. The Series 40 delivers up to 14:1 holding power, almost double that of our nearest competititor.The unique sheave design has 8 gripping faces which directly resist loaded line movement. Traditional designs have an angled resistance to line movement. Our Generation 2 design has straight resistance faces which both distribute the load and minimise rope wear. These faces are offset from the radial line, to draw the rope down into the gripping area when under load.Simple and Secure AttachmentThe Dyneema® Link is easily fitted and is retained securely by a moulded retainer clip. The flexible link can be left with one end attached to the block when fitting - no more lost shackle pins.The system is compatible with Dyneema®/Spectra® strops, webbing and carbon connection points - much more so than steel loop tops or shackles.Smooth Easing of SheetsWith auto models the sheet runs out smoothly and freely as soon as the ratchet mechanism disengages. Low Profile Stand-Up Kit Allows 0™ or 90™ AlignmentStand-up kits feature a clatter-free rubber boot. You can attach the Dyneema® link so that the block is aligned with the stand-up base or across it. It's a neat low-profile solution which allows full articulation.Features: Up to 14:1 holding power - highest available! Smooth easing of sheets Fully Automatic load sensing ratchet engagemen Swivel shackle head for unlmited block rotation Stainless steel shackle head for ultimate durability and compatibility with harsh fixing points Applications: Dinghy mainsheet systems Mainsheet fine tune systems on sportsboats & small keel boats Mainsheet systems on sportsboats using RF7 mainsheet swivel cleat unit Spinnaker and job sheets on dinghies - especially modern asymmetric classes Control line applications on larger yachts Materials: Sheave: Hard anodised Aluminium Ball Bearings: High compression strength carbon black Acetal Frame/Cheeks: Toughened, glass fiber reinforced Nylon Rope Link: UV stabilized, multi-strand impregnated SK75 Dyneema® Specifications:Sheave Ø: 40mm(1-9/16")Max. Rope Ø: 9mm(5/16")M.W.L.: 175kg(385lbs)B. L.: 500kg(1,100lbs)Weight: 44g(1.5oz)

Read more less

Single Articulated Fairlead for 25mm & 28mm Diameter StanchionFeatures:Stainless steel Applications:The perfect solution to deviate furling line of manual furlers or flying sail furlers with drumSpecifications: Max line diameter: (inch) 25/32" / (mm) 20  Materials: 316L stainless steel grade Weight: (lb) 0.243 / (g) 110 Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual Quick Guide (pdf)

Read more less

Halyard Bag - SmallThis handy Blue Performance bag is perfect for storing your halyards at the mast.Features: Storage for up to three mast-head halyards Velcro mast straps Self-draining Waterproof, mildew, and UV-resistant Ripstop Three hanging rope clips inside the bag to separate halyards Heavy duty zip front with Velcro flap The open collar at the top for halyard entry Specifications (L x W):Small: (inch) 5.9 x 17.7 x 4.3 / (mm) 150 x 450 x 110*Sold as an Individual Specifications: Type: Bags Box Dimensions: 5"H x 7"W x 18"L WT: 1.7 lbs UPC: 8715738005501

Read more less

Cockpit Combination BagThis Blue Performance handy storage bag, lets you store your winch handle, drinks, sun cream, etc.Features: Attach and remove using Blue Performance screw-in hooks (not included) Flap with Velcro closure External front pocket with mesh Two external winch handle bags/bottle holders Two inner pockets Waterproof, mildew, and UV-resistant material Ripstop lining Specifications (L x W):Combination Bag (inch) 18.5 x 11.8 x 2.8 / 470 x 300 x 70*Sold as an Individual Specifications: Type: Bags Box Dimensions: 4"H x 15"W x 20"L WT: 3.4 lbs UPC: 8717933038254

Read more less

Halyard Bag - LargeThis handy Blue Performance bag is perfect for storing your halyards at the mast.Features: Storage for up to three mast-head halyards Velcro mast straps Self-draining Waterproof, mildew, and UV-resistant Ripstop Three hanging rope clips inside the bag to separate halyards Heavy duty zip front with Velcro flap The open collar at the top for halyard entry Specifications (L x W):Large: (inch) 8.3 x 27.6 x 5.9 / (mm) 210 x 700 x 150*Sold as an Individual Specifications: Type: Bags Box Dimensions: 7"H x 9"W x 29"L WT: 2.3 lbs UPC: 8715738005600

Read more less

Carbo OneTouch Locking Winch HandleLightweight and fast-acting, the Carbo OneTouch ball bearing locking winch handle makes grinding winches easy! Racers will maneuver faster and cruisers will have confidence in a reliable and easy-to-use winch handle. The Carbo OneTouch locks in and out of the winch using its patented locking mechanism and ergonomically designed grab bar. It only takes one hand to set or release the handle—squeeze anywhere along the grab bar with your palm to unlock; release the bar for a secure lock. Harken added SpeedGrip handle technology to the OneTouch for fast and efficient winching. Its independent swivel between the ball bearing knob and hand-grip allows fast trimming using the palm for low-loads, and powerful two-handed grinding when loads are high. At just 590 g (20.8 oz), the Harken Carbo OneTouch is built to be strong but lightweight. The grab bar and main handle are made of the same tough material as our Carbo block line: high-strength, fiber-reinforced composite, UV-stabilized for excellent protection against long-term exposure to saltwater and sun. The handle and grab bar are cross-ribbed and braced for enhanced stiffness. An aluminum grip rod mates seamlessly to a forged aluminum handle insert to manage bending stresses. The black hard-coat-anodized octagonal drive gear is also integrated into the molding process, resulting in an extremely strong, one-piece structure. Its locking pins are tough 316 marine-grade stainless steel. OneTouch is a registered trademark of Donald J. Steiner.Features: Molded urethane knob for comfortable feel and better grip when palming the handle. Handles feature an independent swivel between the knob and handle to keep the wrist straight and arms in the best power position while grinding. The patented locking mechanism features two stainless steel pins that automatically retract when the handle’s full-length grab bar is squeezed, and extend when it is released for a solid, secure lock. Handles feature a ball bearing grip that efficiently transmits power into the winch. Owner's Manual (pdf)

Read more less

22mm Fiddle Micro Block with V-JamLow-friction Micro blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes.Specifications: Sheave: 22mm / 7/8in. Length: 89mm / 3-1/2in. Weight: 57g / 2oz. Shackle pin: 5mm/ 3/16in Maximum line: 6mm / 1/4in. Maximum working load: 159kg / 350lb Breaking load: 544kg/ 1200 lb

Read more less

Fast Entry Cam Cleat - LargeFast Entry Cam Cleat. Features Die Cast Aluminum Cams, Delrin™ Ball Bearings, Computer Designed High Flare allows for easy entry at various angles. Safe Working Load 500 lbs (227kg) Line 1/4" - 5/8" (6mm - 16mm), Requires (2) 1/4" Flat Head Fasteners. 2-1/16" (52mm) Centers.

Read more less

Standard Cam-Matic® Aluminum CleatAluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Specifications: Height: 30 mm / 1-3/16 in Length: 65 mm / 2-9/16 in Width: 32 mm / 1-1/4 in Weight: 71 g / 2.5 oz Minimum line: 3 mm / 1/8 in Maximum line:12 mm / 1/2 in Fastener spacing: 38 mm / 1-1/2 in Fasteners: 5 FH mm / 10 FH in Maximum working load: 136 kg / 300 lb Breaking load: 340 kg / 750 lb Pawls: Aluminum

Read more less