VE. Direct to USB InterfaceThe VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example, a computer. With this cable, it is also possible to connect more than two VE.Direct products to a single CCGX. Measures 70.5" in length; 5' 10".WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

MEGA-Fuse 250A/58V for 48V Products (Package of 1)Victron Energy's MEGA fuses are frequently used in Victron Energy DC distribution systems. This particular package contains ONE Victron MEGA 250 amp fuse that’s designed for 48V products.Specifications: Max Current Rating: 250 amps Max Voltage Rating: 58 volts Approximate Voltage Drop: 80 mV Cold Resistance: 0.2 mΩ Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Amperage: 250a Fuse Type: MEGA/AMG Type: Fuses Box Dimensions: 0"H x 4"W x 7"L WT: 0.05 lbs UPC: 8719076016700 Quick Guide (pdf)Brochure (pdf)

Read more less

MEGA-Fuse 200A/58V for 48V Products (Package of 1)Victron Energy's MEGA fuses are frequently used in Victron Energy DC distribution systems. This particular package contains ONE Victron MEGA 200 amp fuse that’s designed for 48V products.Specifications: Max Current Rating: 200 amps Max Voltage Rating: 58 volts Approximate Voltage Drop: 80 mV Cold Resistance: 0.25 mΩ Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Amperage: 200a Fuse Type: MEGA/AMG Type: Fuses Box Dimensions: 0"H x 4"W x 7"L WT: 0.05 lbs UPC: 8719076016694 Quick Guide (pdf)Brochure (pdf)

Read more less

Outdoor Antenna for GX LTE 4G-AThis antenna is optimized for 4G frequency bands and, as such, will have slightly better reception on the 4G network. It can be used with the GX LTE 4G for 2G, 3G, and 4G bands.If the 2G/3G variant does not provide sufficient signal quality in an installation, the solution is to contact a local GSM antenna provider. All the necessary information, including a link to the cellular modem (Simcom) used, can be found in this manual.Specifications: Mounting Option: Screw mount Cable Type: RG-316 Cable Length: 3.0 m Connector: SMA male straight Frequencies: 800/900/1800/1900/2100 MHz Signal Gain: 3 dBi Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Active GPS Antenna for GX LTE ModemThis antenna is for the GX LTE Modem.Specifications: Mounting Option: Magnet Cable Type: RG-74 Cable Length: 3.0 m Connector: SMA male straight Frequencies: 1575.42 MHz Signal Gain: 50 Ω Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Replacement 500A PCB for Shunt on BMV 702 & 712 MonitorsReplacement PCB only for 500 Amp shunt on BMV 702 & 712 MonitorsWarranty InfoPlease contact your dealer for any returns, repairs or support issues related to this product.

Read more less

CCGX Wi-Fi Module Simple (Nano USB)Use to connect a Victron Color Control GX to a wireless network.  Enter the wireless ID and Passwords using the Color Control GX.Features: USB 2.0 interface Data rate 802.11n, 802.11g, 802.11b Frequency band 2.4 GHz Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

Ekrano GX Wall MountThis Victron wall mount will be especially useful if users like to keep the smart charger handy - perhaps above the workshop bench. Now users can use the charger without even moving it!Features:Wall mount for Victron Ekrano GXPlease contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Brochure (pdf)

Read more less

VE Direct Cable - 10MThe VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model.  Quick Guide (pdf)

Read more less

VE. Direct - 10M Cable (1 Side Right Angle Connector)Features: Cable Length: 10M 1 Side Right Angle Connector Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

MPPT WireBox-S 75-10/15The MPPT WireBox provides an extra level of safety and is particularly useful if your MPPT Solar Charger is installed in a general access area. It covers all DC terminals, preventing accidental or inquisitive contact with terminal screws.

Read more less

RJ12 UTP Cable - 10MA cable to connect the BMV shunt to the BMV head unit. An RJ12 cable ships standard with a BMV battery monitor, but if this cable is too long or too short it can be replaced by one of these cables, lengths available from 0.3 up to 30 meters.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

GX Touch 50 Adapter for CCGX Cut-OutThis adapter is designed to easily replace the CCGX display with the newer GX Touch. Contents of the packaging are the metal bracket, the plastic bezel, and four mounting screws.There are two methods of mounting: “Install including screen” - most secure mounting of the GX Touch display “Install excluding screen” – GX Touch display is easier to remove, and the adapter can be mounted before completing the wiring Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

Wall Surface Mount for BMV or MPPT ControlsWall mount enclosure for BMV or MPPT Control.Warranty InfoPlease contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Brochure (pdf)

Read more less

VE.Direct CableThe VE.Direct cable is available in different lengths.Features:Length: 5MPlease contact your dealer for any returns, repairs or support issues related to this product.

Read more less

Phoenix Inverter Control f/ VE.Direct InvertersThis panel is intended for all VE.DIRECT Phoenix Inverters.The panel connects to the inverter's remote on/off (H/L) port via two wires, not provided.*Sold as an IndividualPlease contact your dealer for any returns, repairs or support issues related to this product. Specifications: Color: Grey Type: Switches Box Dimensions: 2"H x 4"W x 5"L WT: 1 lbs UPC: 8719076041344 Quick Guide (pdf)Brochure (pdf)

Read more less

Replacement Shunt for BMV Monitors - *PCB is NOT Included*Replacement 500A/50MV shunt for BMV Monitors*BMV PCB is NOT included and must be purchased separately*Warranty InfoPlease contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

VE. Direct - 5M Cable (1 Side Right Angle Connector)Features: Cable Length: 5M 1 Side Right Angle Connector Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

VE-Can to CAN-bus BMS Type B Cable - 1.8M (5.9')Use this cable to connect a CAN bus-enabled battery, not from Victron, to a Victron system. There are two types, A and B. See the manual for details on which cable to use for which brand of batteries.Please contact your dealer for any returns, repairs or support issues related to this product.

Read more less

Busbar 150A 4P & Cover 4X 1/4" TerminalsBusbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.We offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protective cover. Quick Guide (pdf)

Read more less

Busbar 150A 2P with 10 Screws & CoverBusbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.We offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protective cover. Quick Guide (pdf)

Read more less

GX Touch 70 Wall MountThe GX Touch wall mount accessory allows easy mounting of the GX Touch on a solid wall. No drilling or cut-out is required, other than the three screws that fix the wall mount onto the wall.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

Temperature Sensor for Quattro, MultiPlus & GX DevicesA temperature sensor for MultiPlus or Quattro Inverter Charger and also GX Devices.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Brochure (pdf)

Read more less

VE.Direct Cable - 3M The Victron VE.Direct Cable is used to link Victron Energy devices that are VE.Direct equipped. The connection between the devices is essential for the communication of information. This particular cable is 3 meters in length and has two straight ends for connecting purposes. Quick Guide (pdf)

Read more less

VE. Direct - 3M Cable (1 Side Right Angle Connector)Features: Cable Length: 3M 1 Side Right Angle Connector Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

VE.Direct Non-Inverting Remote On-Off Cable Non-Inverting for BlueSolar & SmartSolar MPPTThis cable is intended for on/off control of BlueSolar or Smart Solar MPPT solar chargers with a VE.Direct interface. For example, installing MPPTs in combination with a VE.Bus BMS. The MPPT will be switched on when the source signal on the cable turns high. It will be switched off when the source signal turns low or becomes free-floating. Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

Indicator Eyelet (M8 Eyelet/30AMP ATO Fuse) for Blue Smart IP65 ChargersThe Battery Indicator Eyelet M8 is an accessory for the Blue Smart IP65 Chargers. 0.3m cable length 12 awg 20A max current Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Type: Ring Terminals Box Dimensions: 1"H x 5"W x 7"L WT: 0.25 lbs UPC: 8719076043065 Quick Guide (pdf)Brochure (pdf)

Read more less

RJ45 Splitter 1X Male - 2X Female - 15cm CableFeatures: 1X Male 2X Female Cable Length: 15cm Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

RJ45 UTP - 10M CableA cable to connect Phoenix Inverter Control, VE Interface MK3-USB, and VE.Bus connections between multiple VE.Bus devices and GX devices.Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

Ve.Direct Cable - 0.9MVictron Energy VE Direct to USB interface cable. For use with BMV700 and BMV702 Energy meters, most MPPT solar charge controllers, and the Color Control GX. Available in a variety of lengths, this cable connects the Color GX to its energy meters and solar charge controllers. The Color Control GX has two ports that take this cable.Please contact your dealer for any returns, repairs or support issues related to this product.

Read more less

VE.Direct Cable - 1.8MThe Victron VE.Direct Cable is used to link Victron Energy devices that are VE.Direct equipped. The connection between the devices is essential for the communication of information. This particular cable is 1.8 meters in length and has two straight ends for connecting purposes. Quick Guide (pdf)

Read more less

VE Direct Cable - 0.3MThe VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model. Quick Guide (pdf)

Read more less

VE. Direct - 0.9M Cable (1 Side Right Angle Connector)Features: Cable Length: 0.9M 1 Side Right Angle Connector Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

VE. Direct - 0.3M Cable (1 Side Right Angle Connector)Features: Cable Length: 0.3M 1 Side Right Angle Connector Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

Solar Splitter Pair MC4-Y (1x M-2F / 1x F-2M)This Victron solar splitter pair was designed to split one solar connector (MC4) into two separate MC4 connectors. This enables the parallel connection of two solar panels.Features:Constructed to last even after exposure to various types of weather conditionsPlease contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

GX Touch 70 Protection CoverThe GX Touch 70 protection cover prevents damage from UV light during prolonged exposure to the sun. Specification:Model (inch): 7"Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Type: Covers Box Dimensions: 1"H x 5"W x 7"L WT: 0.2 lbs UPC: 8719076060109 Quick Guide (pdf)

Read more less

GX Touch 50 Protection CoverThe GX Touch 50 protection cover prevents damage from UV light during prolonged exposure to the sun. Specification:Model (inch): 5"Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Type: Covers Box Dimensions: 1"H x 4"W x 6"L WT: 0.1 lbs UPC: 8719076060093 Quick Guide (pdf)

Read more less

Cable for Smart BMS CL 12-100 to MultiPlus This cable will allow the MultiPlus 500VA – 1600VA, MultiPlus Compact 800VA – 2kVA and MultiPlus-II models to be used with BMS products that have no VE.Bus interface, such as the Smart BMS CL 12-100 and the small BMS. These MultiPlus models can be controlled from the Load/Charge Disconnect outputs and Load/Charger outputs respectively. The cable must be wired to the remote on/off connector of the MultiPlus models:  When used with the MultiPlus 500VA-1200VA models connect the black wire to the ON terminal and the red wire to the (+) terminal.  When used with the MultiPlus Compact 800VA-2kVA models connect the black wire to the middle terminal and the red wire to the right (IN) terminal.  When used with the MultiPlus-II models connect the black wire to the lower (-) terminal and the red wire to the upper (+) remote on-off terminal.  Both the Load/Charge Disconnect outputs of Smart BMS CL 12-100 and Load/Charger outputs of the small BMS must be in ‘High’ state in order for the MultiPlus to operate. After shutdown due to low battery voltage, run the alternator or use a battery charger on the primary side of the BMS to reset the system. The MultiPlus will then switch on and start charging (if connected to an AC power source).Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

RJ45 UTP - 5M CableA cable to connect Phoenix Inverter Control, VE Interface MK3-USB, and VE.Bus connections between multiple VE.Bus devices and GX devices.Warranty InfoWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less

MIDI-Fuse 50A/58V-M6 (Package of 5)Victron Energy's MIDI fuses are essentially a smaller version of the MEGA fuses, which are known for their low voltage drop and cold resistance. This particular pack of Victron MIDI fuses contains five 100-amp fuses.Specifications: Max Current Rating: 50 amps Max Voltage Rating: 58 volts Approximate Voltage Drop: 65 mV Cold Resistance: 2 mΩ Please contact your dealer for any returns, repairs or support issues related to this product.

Read more less

MIDI-Fuse 30A/58V-M6 (Package of 5)Victron Energy's MIDI fuses are essentially a smaller version of the MEGA fuses, which are known for their low voltage drop and cold resistance. This particular pack of Victron MIDI fuses contains five 100-amp fuses.Specifications: Max Current Rating: 30 amps Max Voltage Rating: 58 volts Approximate Voltage Drop: 65 mV Cold Resistance: 2 mΩ

Read more less

MIDI-Fuse 40A/58V-M6 (Package of 5)Victron Energy's MIDI fuses are essentially a smaller version of the MEGA fuses and are known to have low voltage drop and cold resistance. This particular pack of Victron MIDI fuses contains five 100-amp fuses.Specifications: Max Current Rating: 40 amps Max Voltage Rating: 58 volts Approximate Voltage Drop: 65 mV Cold Resistance: 1,4 mΩ Please contact your dealer for any returns, repairs or support issues related to this product.

Read more less

MIDI-Fuse 60A/58V-M6 (Package of 5)Victron Energy's MIDI fuses are essentially a smaller version of the MEGA fuses and are known to have low voltage drop and cold resistance. This particular pack of Victron MIDI fuses contains five 100-amp fuses.Specifications: Max Current Rating: 60 amps Max Voltage Rating: 58 volts Approximate Voltage Drop: 70 mV Cold Resistance: 0,9 mΩ Please contact your dealer for any returns, repairs or support issues related to this product.

Read more less

Orion-Tr 24/12-5 (60W) DC-DCFeatures: High efficiency - Using synchronous rectification, full load efficiency exceeds 95% IP43 protection - When installed with the screw terminals oriented downwards Screw terminals - No special tools are needed for the installation Please contact your dealer for any returns, repairs or support issues related to this product. Owner's Manual (pdf)

Read more less

MEGA-Fuse 500A/32V (Package of 5 Pieces)Victron Energy's MEGA fuses are frequently used in Victron Energy DC distribution systems. This particular pack of Victron MEGA fuses contains five 500 amp fuses.Specifications: Max Current Rating: 500 amps Max Voltage Rating: 32 volts Approximate Voltage Drop: 80 mV Cold Resistance: 0.22 mΩ Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Amperage: 500a Fuse Type: MEGA/AMG Type: Fuses Box Dimensions: 0"H x 4"W x 7"L WT: 0.15 lbs UPC: 8719076016670 Quick Guide (pdf)Brochure (pdf)

Read more less

Non-Inverting Remote On-Off CableUse this cable to connect the following products to the VE.Bus BMS: Skylla-TG all models Battery Protect models BP40i, BP60i, and BP200i (all discontinued). The cable translates the remote on/off driver logic from the VE.Bus BMS (normally high, and open circuit in case of alarm) to the logic needed by above products: active pull down to switch off. Quick Guide (pdf)Brochure (pdf)

Read more less

Inverter Remote On-Off CableUse this cable to connect the (discontinued) Phoenix Inverter 12/180, 24/180, 12/350, or 24/350 to a VE.Bus BMS or a BlueSolar MPPT Charger that features a load output:  VE.Bus BMS: the Inverter will be switched off when the batteries are empty BlueSolar MPPT Charger: connecting an inverter directly to the load output of a BlueSolar MPPT Charger is not possible; the inverter needs to be connected to the battery. Then use this cable to switch the inverter on and off with the load output. Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)Brochure (pdf)

Read more less

GX Touch 50 Wall MountThe GX Touch wall mount accessory allows easy mounting of the GX Touch on a solid wall. No drilling or cut-out is required, other than the three screws that fix the wall mount onto the wall.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

Read more less