FREE SHIPPING ON ORDERS OVER $100.00 Dollars!

Give Us a Call 305-318-6535

Close
  • CZone DC Interface Combination Output Interface (COI) 80-911-0119-00 CZone DC Interface Combination Output Interface (COI) 80-911-0119-00

    CZone CZone DC Interface Combination Output Interface (COI) 80-911-0119-00

    Part Number# 80-911-0119-00   CZone® Combination OutputInterface (COI)The Combination Output Interface (COI) combines multipleinput and output devices into one (1) module, offering acompact and intelligent replacement for traditional DCfuse boxes and circuit breaker panels with digitalcontrol and monitoring technology.Digital control and monitoring systems just becamemore cost effective and easier to install with the CZoneCombination Output Interface (COI). This one box replacesup to five separate units, with convenient Deutsch connectorsand IPX5 water resistance, providing a complete CZone systemfor smaller applications. The COI’s high continuous power output(150 amps), plus space, installation time and cost savings alsomake it the perfect building block for larger systems.   Mastervolt is a pioneer in digital switching, a proven CANbus technology where a single data cable is used to operate clusters of switches. In large applications, there could be an average of five separate Output Interfaces, each operating dozens of local appliances along with ancillaries such as timers and dimmers. The Combination Output Interface, however, uses just one compact 30-channel unit to provide all the necessary outputs. Easy installation The COI is essentially a complete CZone® system in a single, rugged housing, making it a cost effective solution where space and budgets are limited. By using fewer connection points along with industry-standard ‘plug & play’ Deutsch connectors, the COI is very easy to install. A USB port has been added to improve remote serviceability and allow for easy upgrades, whilst a high power 150-amp unit fields enough energy for modern domestic appliances that may run through the electrical system. Quick access and overview A CZone touchscreen is used to operate the system centrally, and as the ABYC and CE safety authorities require every circuit to have both a fuse and a bypass, this is provided within the COI. Each ATC fuse can be simply withdrawn to isolate a circuit, and pushed into a different position to create a bypass. To aid identification of the individual fuses, an adhesive circuit label is available, which is printed to a customer’s exact requirements. A clear plastic cover protects the fuses, although a large clipping system provides fast access. Red and green LEDs indicate a circuit’s status at a glance. Partnered with either a dedicated CZone display, or with a multi functional display from one of our industry leading integration partners (B&G, Furuno, Garmin, Lowrance, Simrad), the COI heralds a new era in providing simple, intuitive control over the increasingly complex systems found on today’s applications. Multiple protection The Combination Output Interface has multiple layers of protection provided by software, hardware and mechanical means for ultimate reliability. The casing is built to the IPX5 water ingress standard. An optional cable cover is available to hide the cable glands. Other features include high power pump channels to allow manual control, plus ‘pump running’ feedback, from a single channel without the need for additional wiring. In addition, the COI provides six digital switch inputs (wiper, horn, etc.), eight analogue inputs (starter battery, fuel gauge sender, etc.) twelve low current (10 A) outputs (courtesy lights, anchor light, etc.) and four high current (25 A) outputs (bilge and water pumps).       Features• High density 30 channel module minimizes installation,interconnections and footprint, while delivering best valueper circuit• Full mechanical fuse protection plus bypass on all circuits asrequired by ABYC/CE• Industry standard Deutsch connectors provide fast,plug-n-play installation• Optional cable cover offers improved aesthetics and greatermounting flexibility• Proven, rugged CZone design includes IPX5 Water IngressProtection and NMEA 2000 certification• High power bilge pump channels allow manual control plus“pump running” feedback from a single channel – withoutadditional wiring• USB port provides easy system update from USBflash drive   Specifications General specifications Channels 30 Output channels (high) 4 x 25 A Output channels (low) 12 x 10 A (dimmable) Analogue inputs 8 (positive or negative switching, 0-32 V), 0-1000 Ohm resistance, 4-20 mA current Communication protocol NMEA 2000 Circuit current monitoring all 16 output channels Circuit protection configurable electronic fuse + mechanical fuse and bypass Additional monitoring 2 voltage sensors (on main positive stud and NMEA 2000 power) Digital switch inputs 6 digital input switches with backlight via digital breakout Max. continuous current 150 A at 40 °C (derating > 40 °C) NMEA 2000 power consumption 250 mA at 12 V, 180 mA at 12 V standby Connectors Deutsch Power supply M8 (5/16”) stud positive, M6 (1/4”) stud negative Supply voltage 9-32 V (with power available LED and voltage monitoring) Bilge pump circuits 4 high current channels: integrated manual control and 'pump running' detection Protection degree IPx5 (mounted at 0° +/- 90°) Dimensions (incl. optional cable cover), hxwxd 338 x 235 x 62 mm13.3 x 9.3 x 2.4 inch Weight 1.9 kg4.2 lb Compliance CE, ABYC, NMEA    

    $2,470.18

  • Czone Touch 7 Display  80-911-0200-00 Czone Touch 7 Display  80-911-0200-00

    CZone Czone Touch 7 Display 80-911-0200-00

    MFG #80-911-0200-00   Introducing the CZone Touch 7. With an excellence 7" IPS LCD panel it can be viewed from any angle. The Touch 7 features all new electronics with the fastest dual core processor ever in a CZone Touch display and built in Wi-Fi connectivity and Ethernet for tablet pairing. Installation is easy with front mount installation and screwless rear access, shallow 35mm mounting depths (including cable) and a wide 8-32V DC voltage range. The Touch 7 also uses the familiar and easy to use CZone 2.0 User Interface, customizable for any OEM. The Touch 7 is primarily designed for RV applications, and any marine application should be reserved for parts of the vessel that remain dry.   Features Easy to use touch interface Glass dash styling 24 bit color for better color accuracy and contrast High resolution 1024 X 600 pixel for sharp and clear images 500 nit brightness dimmable for night time viewing Built in Wi-Fi Connectivity NMEA 2000 Compatible Kit includes mounting bracket, 1M Network drop and power connector

    $1,525.00

  • CZone Touch 5 Screen Kit  80-911-0124-00

    CZone CZone Touch 5 Screen Kit 80-911-0124-00

    MFG #80-911-0124-00 The sleek new Touch 5 adds a compact touch screen option to your CZone installation. While offering many of the same features as it's bigger brother the Touch 10, this new display module adds Wi-Fi connectivity as well as the higher specification IPX7 waterproofing. With a super bright widescreen display and the latest capacitive touchscreen technology, this compact unit is perfect for a flybridge or exposed helm position. It also suits smaller vessels where space is at a premium or on larger vessels as a secondary display in an owner's cabin or engine room. Easy to use touch interface Glass dash styling Super bright widescreen display Low profile flush mounting IPX7 water ingress protection Built-in Wi-Fi connectivity Micro SD Card Slot NMEA 2000 compatible  

    $1,400.00

  • CZone Control 1 Interface 80-911-0122-00 CZone Control 1 Interface 80-911-0122-00

    CZone CZone Control 1 Interface 80-911-0122-00

    80-911-0122-00 - (connectors not included) COI Deutsch Connector Kit  80-911-0131-00   CZone Control 1 Interface - Charcoal The Control 1 combines multiple input and output devices in to a single module, minimizing installation, interconnections and footprint. The Control 1 incorporates many of the core features and benefits of the fully featured Combination Output Interface (COI), but has been re-engineered to offer improved cost-per-channel value. The Control 1 features the same rugged design as the fully featured COI with IPX5 water ingress protection and complete mechanical fuse and bypass on all circuits as required by ABYC/CE. Industry standard Deutsch connectors provide "plug and play" installation. Features: Complete CZone Control and Monitoring system in a single box Modular design provides system options for wide range of vessels & RV’s Compatible with marine multi-function and black box chartplotter/fishfinders Equipped with advanced core CZone feature set ABYC compliant ATC fusing and mechanical bypass for redundancy PWM light dimming capability & smooth start Monitor tank levels, battery volts, temperature and pressure using industry standard sensors Bilge Pump Run Detection allows pump control and monitoring from a single wire Status LED’s for all outputs, DC supply & NMEA2000 Additional volt monitoring on main DC connection In-built load shedding allows non-necessary loads to be turned off to preserve battery life USB port allows full system firmware & config updates (no PC or adapters required) Applications With the rapid adoption of digital switching systems into smaller vessels and the recreational vehicle market, CZone is committed to developing a portfolio that includes affordable digital control and monitoring solutions. Control 1 Interface’s increased affordability ensures a wider range of OEM customers can deliver the benefits of digital control and monitoring to their customers, offering greater value, functionality and differentiation.   User and Installation Manual

    $1,394.00 $1,035.00

  • Czone Motor Output Interface (MOI) With Connector & Protective Boot  80-911-0007-00

    CZone Czone Motor Output Interface (MOI) With Connector & Protective Boot 80-911-0007-00

    Motor Output Interface (MOI) with Connector & Protective Boot 80-911-0007-00  The Motor Output Interface has an output pair for controlling DC motors which require a reversal of polarity to change the direction of their mechanical operation. For example, a DC motor for an electric window mechanism will move the window up or down depending on the polarity of the feed to the motor. The Motor Output Interface also incorporates two standard output channels as found on the Output Interface. Single motor control and two normal channels per unit, 20 A per output Built-in circuit protection Note: High and low alarm levels can be set for all inputs.

    $936.00

  • Czone Contact 6 Plus Interface 80-911-0160-00 Czone Contact 6 Plus Interface 80-911-0160-00

    CZone Czone Contact 6 Plus Interface 80-911-0160-00

    This unit has been discontinued and replaced by CZone Output Interface With Connection Boot 80-911-0009-00 Replacement product links CZone Contact 6 Plus 80-911-0160-00 Utilising proven CZone digital switching technology the Contact 6 Plus is a robust and affordable digital switching solution. Featuring 6x 15A solid state ignition protected fused outputs with circuit bypass for system redundancy. The Contact 6 Plus can be networked into an existing CZone system or installed stand-alone with the CZone Waterproof Keypads or compatible multi-function displays. The Contact 6 Plus integrates with all major marine chart plotter and multi-function display manufacturers for direct control of electrical systems from your display, including fault warning notifications and circuit status indication. Features Circuit dimming & smooth start capability. Status LED’s for all outputs. Ultra low current draw. Built-in timer functions for circuits like live bait tanks. Voltage monitoring on the NMEA 2000 network. Built-in Load Shedding allows non-essential loads to be turned off to preserve battery life. Built-in default configurations selectable via dip switch. Affordable add-on module to larger CZone systems. Blown fuse detection and warning. CZone Contact 6 Plus Datasheet CZone Contact 6 Plus System Combine Contact 6 Plus with the Waterpoof Keypad and Smart Harness to achieve a very affordable digital switching system, that reduces installation time, network component cost and delivers a robust electrical system with fewer connection points than a conventional installation. The CZone Contact 6 Plus System provides an ultra-low current draw state to reduce demand on small electrical systems yet still delivers features such as timer functions and Load Shedding to preserve critical battery life by turning off non-essential loads as voltage drops.  Low cost digital switching system. Simple installation. Greater reliability with fewer connections. CZone Contact 6 Plus System Datasheet System examples STANDALONE The Contact 6 Plus and Waterproof Keypad can be networked using the Smart Harness without the need for a full NMEA 2000 network backbone. The Smart Harness is available in 2 and 3 module versions which are perfect for a Contact 6 Plus Module and one or two Waterproof Keypads providing six or twelve switch positions. No NMEA 2000 network backbone required. Cost effective and simple installation. More reliable with less connection points.

    $779.00

  • CZone OI Output Interface With Connection Boot 80-911-0009-00 CZone OI Output Interface With Connection Boot 80-911-0009-00

    CZone CZone OI Output Interface With Connection Boot 80-911-0009-00

    The Output Interface (OI) provides an intelligent replacement for traditional circuit breaker and fuse panels. It has 6x high power, robust output channels which provide the power supply, control and fusing for a circuit as well as integrating many other built in features such as timers and dimmers. Connection to the unit is simple: a large 6 way plug allows connections to cables of up to 16 mm2 (6AWG) in size, or multiple smaller conductors. No need for specialized crimp terminals and expensive crimp tools to be carried for terminations to CZone, just a blade screwdriver. A protective flexible boot offers protection to the connections from harsh environment conditions. 4 levels of backup fusing including manual override (as required by ABYC) Multiple channels can be bridged together to offer higher current switching Power consumption 12V: 85 mA (standby 60 mA) Small, non metallic, easy to install case 6 x 20 amps circuits IPX5 water ingress protection Programmable software fuse sizes CZone Output Interface Datahseet

    $1,154.00 $779.00

  • Czone Meter Interface (MI) With Seal & Plug  80-911-0005-00 Czone Meter Interface (MI) With Seal & Plug  80-911-0005-00

    CZone Czone Meter Interface (MI) With Seal & Plug 80-911-0005-00

    Meter Interface (MI) with Seal & Plug 80-911-0005-00  The Meter Interface accepts inputs from external AC and DC power metering sensors such as: AC and DC voltage and amps, AC kWatts, and DC battery capacity in amp hours and % remaining. All feature high and low alarms that can be set by the user. AC 3 x AC voltage inputs (multi voltage) 2 x AC current inputs Calculates true RMS power DC 3 x DC voltage inputs (multi voltage) 2 x DC current inputs Calculates battery capacity as ampere hours and percentage charge remaining Resolution for current metering down to 0.1 A General Outputs standard NMEA 2000 power monitoring sentences Note: High and low alarm levels can be set for all inputs.

    $670.00

  • CZone Signal Interface (SI) with Seals & Connector 80-911-0013-00

    CZone CZone Signal Interface (SI) with Seals & Connector 80-911-0013-00

    Description   CZone Signal Interface (SI) with Seals & Connector   The Signal Interface (SI) connects the CZone system to your external sensors, alarms and switching devices. The SI allows intelligent, automated operation of circuits depending on the state of the input. Bullet points:• Accepts inputs from switches to trigger alarm i.e. high water float switch• Accepts inputs from industry standard tank senders (0-5V, 10-180 Ohm, 240-33 Ohm)• Accepts inputs from general voltaic or resistive signals can be used for controlling outputs or to display a physical position i.e. show a hatch is partially open• LED status indicators for each input• Dimensions, WxHxD: 6-3/32″x3-29/32″x1-5/8″ 156x100x42 mm• IPX5 water ingress protection  

    $556.00

  • Czone Switch Control Interface (SCI) With Seal  80-911-0011-00

    CZone Czone Switch Control Interface (SCI) With Seal 80-911-0011-00

    Switch Control Interface (SCI) with Seal 80-911-0011-00  The Switch Control Interface provides an interface between the CZone network and the traditional mechanical switches with which manufacturers and users are familiar. The Switch Control Interface simplifies your wiring, supports your existing choice of switches, protects against failures and allows for more installation options. Single switch position can control multiple Output Interface channels. Attaches to switch panels via custom Switch Control Interface cable. Multiple Switch Control Interface switches can control single Output Interface channel. Output for backlighting of switch labels (dimmable). Outputs systems on and function/fault codes to systems on LED of switches (dimmable). Programmable switch types. 8 inputs per module (16 individual controls). Sequential button press functionality.

    $474.00

  • CZone Combined Output Interface Digital Switch Breakout DSB 80-911-0134-00 CZone Combined Output Interface Digital Switch Breakout DSB 80-911-0134-00

    CZone CZone Combined Output Interface Digital Switch Breakout DSB 80-911-0134-00

    The COI Digital Switch Breakout (DSB) is the interface between the COI and up to 6 CZone digital switches (push button or rocker). The digital switches include dimmable LED backlighting, systems on, fault codes and a plug and play harness simplifying installation. Connect up to 6 digital switches to the COI Support for single or double throw switches (up to 12 programmable switch points) Uses existing SCI switch cables with options for Rocker or Push button plugs at various lengths Digital switches include dimmable backlighting, systems on and fault codes IPX5 Water Ingress Rating

    $387.00

  • Czone Contact 6 with Seals & Plug  80-911-0140-00 Czone Contact 6 with Seals & Plug  80-911-0140-00

    CZone Czone Contact 6 with Seals & Plug 80-911-0140-00

    CZone Contact 6 Interface 80-911-0140-00 - with seals & plugs The CZone Contact 6 is an entry level digital switching module. It offers six independent channels of positively or negatively switched output channels and is ideal to standalone on smaller marine or recreational vehicle applications, or as part of a larger network. The Contact 6 can be networked via NMEA 2000 and controlled using a CZone Touch display, wirelessly using a CZone Wireless Interface, networked Multifunction Display or digital push or toggle switch.CZone’s Contact 6 offers six 7.5 A outputs allowing system designers to locate modules nearer load groups, reducing harnessing and wire labour and costs. Hardware innovation sees the introduction of PTC auto-resettable fuses and retains system redundancy with CZone’s manual circuit bypass. Entry level digital switching module for 12 V marine and RV applications. Stand alone or networked with other CZone products. Compatible with CZone integrated Multifunction Displays (MFD’s). Six independent dry contact relays allow positive, negative and reversing motor control. Uses proven CZone technology. Internal auto-resetting fuses. Electronic relay bypass switch. Status LEDs/fault codes for all channels. IPx5 ingress protection. Conform NMEA 2000.

    $367.11

  • CZONE AC Voltage Transducer For DIG & AC-VSEN-4 | AC-VSEN-4

    CZone CZONE AC Voltage Transducer For DIG & AC-VSEN-4 | AC-VSEN-4

    C Transducer AC-VSEN-4 Includes 3 voltage transformers for up to 3 voltage inputs. Transformer, Current, Heavy Duty   Brand: CZone Connector: SeaTalk® Exterior Color: Charcoal Comm Method: NMEA 2000®

    $122.49

  • Czone Control 1 Deutsch Connector Kit   80-911-0131-00 Czone Control 1 Deutsch Connector Kit   80-911-0131-00

    CZone Czone Control 1 Deutsch Connector Kit 80-911-0131-00

    Deutsch Connector Kit contains Deutch Connectors, Locking Wedges and Contact Pins necessary to connect bare wires to Control1/Combination Output Interface High Outputs (DTP 4-Way), Low Outputs (DT 12-Way) and monitoring Inputs (DT 8-Way). 1 x DTP06-4S - Plug 1 x DT06-12SA - Plug 1 x DT06-08SA - Plug 1 x WP-4S - Locking Wedge 1 x W12S - Locking Wedge 1 x W8S - Locking Wedge 4 x 0462-203-12141 - Size 12 Contact (14-12AWG, 2.0-4mm²) 4 x 0462-209-16141 - Size 16 Contact (14AWG, 2.0-2.5mm²) 4 x 1062-12-0222 – Size 12 Contact (10AWG, 4-6mm²) 20 x 0462-201-16141 - Size 16 Contact (20-16AWG, 0.5-1.5mm²)  

    $98.76

Czone
Footer image

© 2025 REBELLION MARINE, Powered by Shopify

    Login

    Forgot your password?

    Don't have an account yet?
    Create account