Flush Mount Rod Holder Bar PinAll Stainless SteelRH-525SS/XS Medium 30°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 14"L WT: 1.9 lbs UPC: 096811512511

Read more less

Flush Mount Rod HolderRH-534HS Large 15° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 2.6 lbs UPC: 096811513402

Read more less

Flush Mount Rod HolderRH-527VS Medium 0° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 14"L WT: 1.9 lbs UPC: 096811502703

Read more less

15 Degree Fixed Standard Rod HolderThis Rupp standard rod holder is made of 316L stainless steel and is the perfect combination of form and function. This rod holder has an exclusive forged end cap that gives unbreakable rod support while providing a finished look polished to a mirror-like finish.Features:Forged end cap that gives an unbreakable rod supportSpecifications: Angle: 15-degrees Material: Stainless steel Liner: White Specifications: Angle: 15 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 13"L WT: 2.6 lbs UPC: 784703001716

Read more less

FLUSH MOUNTStainless Steel Rod HoldersTough enough for heavy tackleMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place.Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8". ANGLE: 0° LENGTH: 9" I.D.: 1-5/8" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 1-5/8" Length (Inches): 9" Mounting Style: Flush Angle: 0 Degrees Finish: Polished Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 14"L WT: 2.1 lbs UPC: 768296005207

Read more less

Fully Adjustable rod holder with over 9" of composite construction, accomodating all rods. Attaches to any Scotty Downrigger Boom.Main features: Unique Side or Deck Mounting Bracket Tilts up and down, including upright for rod storage when travelling Less missed strike opportunities Swivels 360 degrees Mount Dimensions 4" x 2" x 2"Bolting Dimensions 1 5/16" x 3 3/16"

Read more less

Stainless Steel Side Mount Rod Holder Side Mount Rod Holders and mounting brackets are constructed of formed 316 stainless steel with plastic end cap. Accommodates rods up to 1-5/8” in diameter. Installs with four #8 RH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 9" Mounting Style: Surface Box Dimensions: 5"H x 6"W x 12"L WT: 1.15 lbs UPC: 035514325103

Read more less

NEW - Innovative Trolling System Puts You In ControlNo matter how you fish - or what your fish for - you can customize our new trolling system to fit your style. Our new rod holders feature a pistol grip design for one-handed adjustment of the rod angle and a ratcheting system for easy rod removal. Made of High-strength aluminum to withstand the punishment of big water use and can be changed out in a snap with our unique track system.Adjustable Rod HolderDual AxisExperience 360° of rotation at the push of a button with this 10" holder. It features six up and down locking positions, a pistol grip release for quick, one-handed angle changes and a ratcheting adjustment system that allows you to quickly position the holder vertically. Includes a UV-resistant end cap to protect rod and reelWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Finish: Polished Box Dimensions: 4"H x 5"W x 16"L WT: 3 lbs UPC: 029402032129 Owner's Manual (pdf)

Read more less

NEW - Innovative Trolling System Puts You In ControlNo matter how you fish - or what your fish for - you can customize our new trolling system to fit your style. Our new rod holders feature a pistol grip design for one-handed adjustment of the rod angle and a ratcheting system for easy rod removal. Made of High-strength aluminum to withstand the punishment of big water use and can be changed out in a snap with our unique track system.Adjustable Rod HolderSingle AxisThis 10" holder utilizes 6 up and down locking positions, and delivers 90° of side-to-side rotation. A pistol grip release allows for quick, one-handed angle changes, and the innovative ratcheting adjustment system allows you to quickly pull the holder to a vertical position. Includes a UV-resistant end cap to protect rod and reel.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Finish: Polished Box Dimensions: 4"H x 5"W x 16"L WT: 2.65 lbs UPC: 029402032112 Owner's Manual (pdf)

Read more less

Weld On Aluminum Flared Rod Holder without Blade 10" Specifications: Length: 10" ID: 1-7/8" WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Flush Mount Rod Holder - 30 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl LinerThese larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place.Features: 316L stainless steel 1/2 in. threaded drain Specifications: Angle: 30-degrees Length: 9 in. Inner Diameter: 1-5/8 in. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 4"H x 5"W x 11"L WT: 2.2 lbs UPC: 768296005542

Read more less

Adjustable Mid Mount Rod Holder - 1.66" or 1-1/2" OD - White Powder Coat Aluminum with Sleeve & Hex KeyC.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Adjustable Mid Mount Fits rails with 1.66" or 1-1/2" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10" Finish: Powder Coat Diameter (Inches): 1-1/2" Construction: Powder Coated Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010669

Read more less

Aluminum Horizontal Clamp-On Rod Holder OD - White Powder Coated with SleeveC.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Horizontal Fits rails with 1.66" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10" Finish: Powder Coat Diameter (Inches): 1-5/16" Construction: Powder Coated Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010621

Read more less

70 Series Standard Flush Mount Rod Holder - 15 Degree - Stainless Steel - Gimbal Bar Bottom - Black LinerThese flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. A built-in gimbal bar on the open bottom allows water to drain and prevents the rod from spinning.Features: 316L stainless steel Fits 2-3/16 in. hole diameter No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 15 degrees Bottom Style: Bar Liner Color: Black Inner Diameter: 1-5/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in. Gimbal Bar: ¼ in. wide x ½ in. tall Specifications: Angle: 15 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 14"L WT: 1.9 lbs UPC: 768296011307 Quick Guide (pdf)

Read more less

30 Degree Fixed Standard Rod HolderThis Rupp standard rod holder is made of 316L stainless steel and is the perfect combination of form and function. This rod holder has an exclusive forged end cap that gives unbreakable rod support while providing a finished look polished to a mirror-like finish.Features:Forged end cap that gives an unbreakable rod supportSpecifications: Angle: 30-degrees Material: Stainless steel Liner: White Specifications: Angle: 30 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 13"L WT: 2.5 lbs UPC: 784703001297

Read more less

Weld On Aluminum Flared Rod Holder without Blade Mill Finished 10" Specifications: Length: 10" ID: 1-7/8" WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Aluminum Clamp-On Rod Holder - Vertical - 2.375" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Diameter (Inches): 2-3/8" Finish: Polished Length (Inches): 10" Mounting Style: Clamp Box Dimensions: 3"H x 10"W x 13"L WT: 1.7 lbs UPC: 768296009786

Read more less

FLUSH MOUNTStainless Steel Rod HoldersTough enough for heavy tackleMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place.Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8". ANGLE: 30° LENGTH: 9" I.D.: 1-5/8" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Flush Angle: 30 Degrees Box Dimensions: 4"H x 5"W x 14"L WT: 2.1 lbs UPC: 768296005245

Read more less

Stainless SteelFlush MountSwivel Rod Holders80 Series15°10-1/2" Length1-7/8" ID Swivel base ideal for bent butt rod fishing Swivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fish Cast 1-piece stainless steel swivel cup Super smooth turning precision-machined 1/2" pivot with fine threads WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 1-7/8" Finish: Polished Length (Inches): 10-1/2" Mounting Style: Flush Box Dimensions: 5"H x 5"W x 16"L WT: 3 lbs UPC: 768296006037

Read more less

Stainless Steel Rod & Cup Holder Backing Plate for Round Rod/Cup Only for 3-3/4" HolesThreaded Backing Plates for replacing existing ø3-3/4 cup holders with round SST plastic combination rod and cup holders. For use with round top SST plastic only in a ø3-3/4 existing hole.Features:Screws are included

Read more less

Stainless Steel 15° Rod & Cup Holder - Drain - Round TopFeatures 316 Stainless with Round Top 15º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 15 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 6"H x 7"W x 15"L WT: 3.55 lbs UPC: 857515002070

Read more less

344 Round Flush Deck MountSealed base for watertight applications (such as kayak decks) with splash cover.For all Scotty post mount rod holders.Dimensions: 3 3/4" diameterBolting Dimensions 2 3/16" x 2 3/16"WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Rod Holder - Medium - 0° - Stainless SteelThe choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9 " Mounting Style: Surface Box Dimensions: 1"H x 6"W x 15"L WT: 1.75 lbs UPC: 096811530027

Read more less

Swivel Base Rod HoldersRH570Stainless Steel Side Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 12" Mounting Style: Bulkhead Box Dimensions: 5"H x 6"W x 13"L WT: 3.3 lbs UPC: 096811517004

Read more less

Stainless Steel Clamp-On Rod HolderStainless SteelType 316PolishedFeatures and Benefits Adjustable clamp to fit multiple pipe and tube sizes For use on vertical and horizontal pipe/tube Rotate and lock in fishing angle Rotates and locks every 18° Form-fitted PVC White Liner Specifications:Clamp Fits (Outside Diameter):7/8" & 1" O.D. (Tube)Location:Bow RailsRod Holder Inside Diameter: 1-5/8"This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Mounting Style: Clamp Box Dimensions: 3"H x 8"W x 12"L WT: 2.95 lbs UPC: 630838022136

Read more less

Stainless Steel Clamp-On Rod HolderStainless SteelType 316PolishedFeatures and Benefits Adjustable clamp to fit multiple pipe and tube sizes For use on vertical and horizontal pipe/tube Rotate and lock in fishing angle Rotates and locks every 18° Form-fitted PVC White Liner Specifications:Clamp Fits (Outside Diameter):1-1/16" & 1-5/16" O.D. (Pipe), 1-1/4" O.D. (Tube)Location:T-Top Ring, Leaning Posts, Poling PlatformsRod Holder Inside Diameter: 1-5/8"This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Mounting Style: Clamp Box Dimensions: 3"H x 8"W x 12"L WT: 3.2 lbs UPC: 630838028534

Read more less

Swivel Base Rod HolderRH577VVertical 0°Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 12" Mounting Style: Flush Box Dimensions: 4"H x 6"W x 13"L WT: 3.2 lbs UPC: 096811517707

Read more less

Swivel Base Rod HolderRH577XLVertical 0° Extra Long TubeWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 16" Mounting Style: Flush Box Dimensions: 5"H x 7"W x 17"L WT: 4.2 lbs UPC: 096811517714

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-530SS/XS Large 30°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 2.7 lbs UPC: 096811513013

Read more less

Outrigger Rod Holder with Liner & Strap - AluminumFeatures: Strong, Stylish and Functional Includes Liner and Strap Aluminum Specifications: Mounting Style: Gunwale Length (Inches): 16" Finish: Polished Construction: Aluminum Box Dimensions: 3"H x 13"W x 24"L WT: 3.65 lbs UPC: 768296010348

Read more less

241 Combination Side or Deck MountCan be mounted on top or side of gunnel. For all Scotty post mount rod holders.Dimensions: 4" x 2" x 2"Bolting Dimensions: 1 5/16" x 3 3/16"

Read more less

No. 355 Rodmaster IIFibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pinFits 3/4" and 1" Scotty downrigger booms. Bolts through the boom

Read more less

Power LockScotty's most popular value-priced, positive-locking, open style rod holder. Fibre reinforced engineering nylon, offers strength, resilience and reliability.No. 231Power Lock Rod Holder with No. 244 Flush Deck MountWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Construction: Plastic Box Dimensions: 3"H x 7"W x 11"L WT: 1.3 lbs UPC: 062017002316

Read more less

253Gimbal MountAllows the use of Scotty rod holders with factory installed flush mounted rod holders.Fits 9" x 1-1/2" flush mountsWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Triple Threat Three Pole Rod Holder - BlackThe Triple Threat™ Three Pole Rod Holder is made in the USA with recycled materials. Features the ability to hold bait, cast, and fly-fishing rods/reels. This three-pole, side-mount rod holders come equipped with a built-in knife and plier storage with holders that can accommodate up to 16 different fishing lures. Constructed of one-piece injection molded, UV stabilized, polypropylene construction. No assembly is required. This is a fisherman’s dream and is a must-have for any boat, kayak, or dock!Features: Accessory Track Mounting System™ Scent bottle storage Four leashes and two bungee cord attachment points Built-in knife and plier holder Can accommodate up to 16 different fishing lures Accommodates rods up to 1-3/4 inch in diameter Installs with four #8 fasteners (included in display-packed product) Specifications: Color: Black Length (inch): 13-1/2” Height (inch): 10-3/4” Distance Between Screw Holes Horizontally (inch): 7” Distance Between Screw Holes Vertically (inch): 4-1/2” WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Polypropylene Diameter (Inches): 1-3/4" Finish: Black Length (Inches): 13-1/2" Box Dimensions: 3"H x 11"W x 14"L WT: 0.9 lbs UPC: 035514329972 Brochure (pdf)

Read more less

Triple Threat Three Pole Rod Holder - WhiteThe Triple Threat™ Three Pole Rod Holder is made in the USA with recycled materials. Features the ability to hold bait, cast, and fly-fishing rods/reels. This three-pole, side-mount rod holders come equipped with a built-in knife and plier storage with holders that can accommodate up to 16 different fishing lures. Constructed of one-piece injection molded, UV stabilized, polypropylene construction. No assembly is required. This is a fisherman’s dream and is a must-have for any boat, kayak, or dock!Features: Accessory Track Mounting System™ Scent bottle storage Four leashes and two bungee cord attachment points Built-in knife and plier holder Can accommodate up to 16 different fishing lures Accommodates rods up to 1-3/4 inch in diameter Installs with four #8 fasteners (included in the display-packed product) Specifications: Color: White Length (inch): 13-1/2” Height (inch): 10-3/4” Distance Between Screw Holes Horizontally (inch): 7” Distance Between Screw Holes Vertically (inch): 4-1/2” WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Polypropylene Diameter (Inches): 1-3/4" Finish: White Length (Inches): 13-1/2" Box Dimensions: 3"H x 11"W x 14"L WT: 0.9 lbs UPC: 035514329910 Brochure (pdf)

Read more less

Stand-Off Mount Rod HolderFeatures: White UV-Stabilized Polyethylene Front Access Hole & Integrated Stand-Offs for Easy Mounting Stainless Hardware Not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

King Fish Rod Holder - BlackBolt-on king fish rod holder. They are designed to be mounted under the hardtops, for King Fish. It's also great for Stripper Bass and running Mojos. Black to match some hardtops. Mount with four 1/4" bolts, hardware not included. Please measure your hardtop before ordering.

Read more less

Kite Fishing 3-Rod ClusterOne of the most useful fishing tools you can have when kite fishing is the TACO Marine Kite Fishing Rod Cluster, which allows you the freedom to place your kite fishing outfits in the perfect boat location. This three-rod cluster keeps everything close, tidy and easy to handle when the bite turns on.Features: 15° bent shaft for clearance Fits all standard gunnel mount rod holders Fish with multiple rods from one holder Includes form-fitted, anti-fungal PVC white liner Gimbal design for secure locking placement Sold individually Bag included 3-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Elite Screwless Stainless Steel 15° Rod & Cup Holder - Drain - Round Top*Must have access to underneath side of gunwale for installation*Features 316 Stainless with Round Top 15º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 15 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 6"H x 7"W x 15"L WT: 3.7 lbs UPC: 857515002179 Quick Guide (pdf)

Read more less

Stainless Steel 30° Rod & Cup Holder - Open - Oval TopFeatures 316 Stainless with Oval Top 30º Rod Angle Open at Bottom Specifications: Angle: 30 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.35 lbs UPC: 857515002032 Quick Guide (pdf)

Read more less

241 Combination Side or Deck MountCan be mounted on top or side of gunnel. For all Scotty post mount rod holders.Dimensions: 4" x 2" x 2"Bolting Dimensions: 1 5/16" x 3 3/16"

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-527VS/XS Medium 0°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 14"L WT: 1.9 lbs UPC: 096811512719

Read more less

Sure-Grip Stainless Steel Rod Holder - 4" & 5-Degree AngleAttwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle.Specifications: Angle: 5-degrees Stem Length: 4 inches with wing nut Use for: Horizontal rod position Includes: 5071 mounting base Specifications: Construction: Stainless Steel Length (Inches): 4" Box Dimensions: 2"H x 7"W x 10"L WT: 0.7 lbs UPC: 022697506030 Quick Guide (pdf)

Read more less

30 Degree Large HD Swivel Rod HolderThis Rupp large rod holder is made of 316L stainless steel. Durable forged components give heavy-duty performance and are polished to a jewelry-like finish for the finest cockpits.Rupp swivel rod holders are the combination of a top-quality rod holder with a special compression-bearing socket that allows rods to swivel a full 360°, keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.Features: A precision-engineered compression bearing socket gives it a performance edge Fully adjustable with Delrin bearing surfaces to provide precise control of the swivel action Specifications: Angle: 30-degrees Material: Stainless steel Liner: White Size: large Specifications: Angle: 30 Degrees Construction: Stainless Steel Box Dimensions: 6"H x 6"W x 17"L WT: 3.75 lbs UPC: 784703001280

Read more less

Rod/Cup Holder - 304 Stainless Steel - 15°Threaded body includes locking nut for easy installation. No backing plate needed. Open bottom with threaded insert for pipe/hose barb installation. Includes pin for locking rod in place. Features: 304 S.S. 15° Rod/Cup Holder Material: 304 Stainless Steel Rod Holder Degree: 15° Cupholder O.D.: 4-3/4" Depth: 2-1/2" Cut-Out: 4"

Read more less

Rod/Cup Holder - 304 Stainless Steel - 0°Threaded body includes locking nut for easy installation. No backing plate needed. Open bottom with threaded insert for pipe/hose barb installation. Includes pin for locking rod in place. Features: 304 S.S. 0° Rod/Cup Holder Material: 304 Stainless Steel Rod Holder Degree: 0° Cupholder O.D.: 4-3/4" Depth: 2-1/2" Cut-Out: 4"

Read more less

Aluminum Clamp-on Rod HoldersModel:  RA5201GLColor:   GoldFits:      1.050" O.D. PipeMount:  HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Anodized Aluminum Diameter (Inches): 2.14" Finish: Gold Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.7 lbs UPC: 096811520127

Read more less