Stainless Steel 15° Rod & Cup Holder - Drain - Round TopFeatures 316 Stainless with Round Top 15º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 15 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 6"H x 7"W x 15"L WT: 3.55 lbs UPC: 857515002070

Read more less

344 Round Flush Deck MountSealed base for watertight applications (such as kayak decks) with splash cover.For all Scotty post mount rod holders.Dimensions: 3 3/4" diameterBolting Dimensions 2 3/16" x 2 3/16"WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Rod Holder - Medium - 0° - Stainless SteelThe choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9 " Mounting Style: Surface Box Dimensions: 1"H x 6"W x 15"L WT: 1.75 lbs UPC: 096811530027

Read more less

Stainless Steel Clamp-On Rod HolderStainless SteelType 316PolishedFeatures and Benefits Adjustable clamp to fit multiple pipe and tube sizes For use on vertical and horizontal pipe/tube Rotate and lock in fishing angle Rotates and locks every 18° Form-fitted PVC White Liner Specifications:Clamp Fits (Outside Diameter):7/8" & 1" O.D. (Tube)Location:Bow RailsRod Holder Inside Diameter: 1-5/8"This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Mounting Style: Clamp Box Dimensions: 3"H x 8"W x 12"L WT: 2.95 lbs UPC: 630838022136

Read more less

Stainless Steel Clamp-On Rod HolderStainless SteelType 316PolishedFeatures and Benefits Adjustable clamp to fit multiple pipe and tube sizes For use on vertical and horizontal pipe/tube Rotate and lock in fishing angle Rotates and locks every 18° Form-fitted PVC White Liner Specifications:Clamp Fits (Outside Diameter):1-1/16" & 1-5/16" O.D. (Pipe), 1-1/4" O.D. (Tube)Location:T-Top Ring, Leaning Posts, Poling PlatformsRod Holder Inside Diameter: 1-5/8"This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Mounting Style: Clamp Box Dimensions: 3"H x 8"W x 12"L WT: 3.2 lbs UPC: 630838028534

Read more less

Swivel Base Rod HolderRH577VVertical 0°Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 12" Mounting Style: Flush Box Dimensions: 4"H x 6"W x 13"L WT: 3.2 lbs UPC: 096811517707

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-530SS/XS Large 30°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 2.7 lbs UPC: 096811513013

Read more less

Outrigger Rod Holder with Liner & Strap - AluminumFeatures: Strong, Stylish and Functional Includes Liner and Strap Aluminum Specifications: Mounting Style: Gunwale Length (Inches): 16" Finish: Polished Construction: Aluminum Box Dimensions: 3"H x 13"W x 24"L WT: 3.65 lbs UPC: 768296010348

Read more less

No. 355 Rodmaster IIFibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pinFits 3/4" and 1" Scotty downrigger booms. Bolts through the boom

Read more less

Power LockScotty's most popular value-priced, positive-locking, open style rod holder. Fibre reinforced engineering nylon, offers strength, resilience and reliability.No. 231Power Lock Rod Holder with No. 244 Flush Deck MountWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Construction: Plastic Box Dimensions: 3"H x 7"W x 11"L WT: 1.3 lbs UPC: 062017002316

Read more less

253Gimbal MountAllows the use of Scotty rod holders with factory installed flush mounted rod holders.Fits 9" x 1-1/2" flush mountsWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Triple Threat Three Pole Rod Holder - BlackThe Triple Threat™ Three Pole Rod Holder is made in the USA with recycled materials. Features the ability to hold bait, cast, and fly-fishing rods/reels. This three-pole, side-mount rod holders come equipped with a built-in knife and plier storage with holders that can accommodate up to 16 different fishing lures. Constructed of one-piece injection molded, UV stabilized, polypropylene construction. No assembly is required. This is a fisherman’s dream and is a must-have for any boat, kayak, or dock!Features: Accessory Track Mounting System™ Scent bottle storage Four leashes and two bungee cord attachment points Built-in knife and plier holder Can accommodate up to 16 different fishing lures Accommodates rods up to 1-3/4 inch in diameter Installs with four #8 fasteners (included in display-packed product) Specifications: Color: Black Length (inch): 13-1/2” Height (inch): 10-3/4” Distance Between Screw Holes Horizontally (inch): 7” Distance Between Screw Holes Vertically (inch): 4-1/2” WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Polypropylene Diameter (Inches): 1-3/4" Finish: Black Length (Inches): 13-1/2" Box Dimensions: 3"H x 11"W x 14"L WT: 0.9 lbs UPC: 035514329972 Brochure (pdf)

Read more less

Kite Fishing 3-Rod ClusterOne of the most useful fishing tools you can have when kite fishing is the TACO Marine Kite Fishing Rod Cluster, which allows you the freedom to place your kite fishing outfits in the perfect boat location. This three-rod cluster keeps everything close, tidy and easy to handle when the bite turns on.Features: 15° bent shaft for clearance Fits all standard gunnel mount rod holders Fish with multiple rods from one holder Includes form-fitted, anti-fungal PVC white liner Gimbal design for secure locking placement Sold individually Bag included 3-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Elite Screwless Stainless Steel 15° Rod & Cup Holder - Drain - Round Top*Must have access to underneath side of gunwale for installation*Features 316 Stainless with Round Top 15º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 15 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 6"H x 7"W x 15"L WT: 3.7 lbs UPC: 857515002179 Quick Guide (pdf)

Read more less

Stainless Steel 30° Rod & Cup Holder - Open - Oval TopFeatures 316 Stainless with Oval Top 30º Rod Angle Open at Bottom Specifications: Angle: 30 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.35 lbs UPC: 857515002032 Quick Guide (pdf)

Read more less

241 Combination Side or Deck MountCan be mounted on top or side of gunnel. For all Scotty post mount rod holders.Dimensions: 4" x 2" x 2"Bolting Dimensions: 1 5/16" x 3 3/16"

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-527VS/XS Medium 0°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 14"L WT: 1.9 lbs UPC: 096811512719

Read more less

Sure-Grip Stainless Steel Rod Holder - 4" & 5-Degree AngleAttwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle.Specifications: Angle: 5-degrees Stem Length: 4 inches with wing nut Use for: Horizontal rod position Includes: 5071 mounting base Specifications: Construction: Stainless Steel Length (Inches): 4" Box Dimensions: 2"H x 7"W x 10"L WT: 0.7 lbs UPC: 022697506030 Quick Guide (pdf)

Read more less

30 Degree Large HD Swivel Rod HolderThis Rupp large rod holder is made of 316L stainless steel. Durable forged components give heavy-duty performance and are polished to a jewelry-like finish for the finest cockpits.Rupp swivel rod holders are the combination of a top-quality rod holder with a special compression-bearing socket that allows rods to swivel a full 360°, keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.Features: A precision-engineered compression bearing socket gives it a performance edge Fully adjustable with Delrin bearing surfaces to provide precise control of the swivel action Specifications: Angle: 30-degrees Material: Stainless steel Liner: White Size: large Specifications: Angle: 30 Degrees Construction: Stainless Steel Box Dimensions: 6"H x 6"W x 17"L WT: 3.75 lbs UPC: 784703001280

Read more less

Rod/Cup Holder - 304 Stainless Steel - 15°Threaded body includes locking nut for easy installation. No backing plate needed. Open bottom with threaded insert for pipe/hose barb installation. Includes pin for locking rod in place. Features: 304 S.S. 15° Rod/Cup Holder Material: 304 Stainless Steel Rod Holder Degree: 15° Cupholder O.D.: 4-3/4" Depth: 2-1/2" Cut-Out: 4"

Read more less

Rod/Cup Holder - 304 Stainless Steel - 0°Threaded body includes locking nut for easy installation. No backing plate needed. Open bottom with threaded insert for pipe/hose barb installation. Includes pin for locking rod in place. Features: 304 S.S. 0° Rod/Cup Holder Material: 304 Stainless Steel Rod Holder Degree: 0° Cupholder O.D.: 4-3/4" Depth: 2-1/2" Cut-Out: 4"

Read more less

Aluminum Clamp-on Rod HoldersModel:  RA5201GLColor:   GoldFits:      1.050" O.D. PipeMount:  HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Anodized Aluminum Diameter (Inches): 2.14" Finish: Gold Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.7 lbs UPC: 096811520127

Read more less

Stainless Steel Rod HoldersWith 1/2" Pipe Threaded Drain HoleThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place ANGLE: 15° LENGTH: 10-1/2" I.D.: 1-7/8" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 15 Degrees Mounting Style: Flush Box Dimensions: 5"H x 6"W x 16"L WT: 3.1 lbs UPC: 768296005566

Read more less

9" 30-Degree Rod Holder - Screwless - Stainless SteelFeatures: 316 Stainless Steel 2-1/8" Cut Out Requires Installation Wrench

Read more less

9" 15-Degree Rod Holder - Screwless - Stainless SteelFeatures: 316 Stainless Steel 2-1/8" Cut Out Requires Installation Wrench

Read more less

1-1/4" Polished SS Adjustable Clamp-On Rod Holder Choose the angle you need while providing the versatility of mounting either horizontally or vertically Clamp-on rod holders are sized IPS pipe Includes a heavy white vinyl liner Rod holder ID 1-5/8" Quick Guide (pdf)

Read more less

Stainless Steel 30° Rod & Cup Holder - Drain - Round TopFeatures 316 Stainless with Round Top 30º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 30 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.55 lbs UPC: 857515002018

Read more less

Single Aluminum 5° Transom Mount Rod HolderThe perfect way to add rod holders to the transom area. Designed with outboard engine wells in mind. An ideal way to add rod holders to a seating station. These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tallgimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected. Mount vertically or with some outward angle for a wider fishing spread. Tube leans 5° away from the 3" tall x 2-3/4" wide mounting base. 10" overall height. Includes white vinyl liner. Specifications: Construction: Aluminum Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 10" Mounting Style: Transom Box Dimensions: 5"H x 10"W x 13"L WT: 2.5 lbs UPC: 768296009793

Read more less

FLUSH MOUNTStainless Steel Rod HoldersTough enough for heavy tackleMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place.Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8". ANGLE: 15° LENGTH: 9" I.D.: 1-5/8" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Flush Angle: 15 Degrees Finish: Polished Box Dimensions: 4"H x 4"W x 14"L WT: 2.2 lbs UPC: 768296005221

Read more less

Clamp-On Rod Holder - White Aluminum - Vertical Mount - Fits 1.900 O.D. PipeColor:BlackPipe Size:#4Fits:1.900" O.D. PipeMount:VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.85 lbs UPC: 096811500433 Quick Guide (pdf)

Read more less

Stainless Steel 15° Rod & Cup Holder - Open - Round TopFeatures 316 Stainless with Round Top 15º Rod Angle Open at Bottom Specifications: Angle: 15 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 6"H x 7"W x 15"L WT: 3.35 lbs UPC: 857515002087 Quick Guide (pdf)

Read more less

Large Stainless Steel Bolt-less Swivel Rod Holder - 30°2020 IBEX Innovation Award Winner.  This patent-pending SWIVEL rod holder is a game changer!   Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required.  This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing, as well as our patent-pending locking swivel feature that allows the rod holder to be used in either a fixed or 360° swivel configuration. Closed-end with threaded drain hole.  This is the last rod holder you will need on your boat...ever!Revolvers are the combination of Rupp’s top-quality rod holder with a special Compression Bearing Socket that allows rods to swivel a full 360° - keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides. These larger diameter rod holders are available at 0° 15° & 30° angles. To be used with the Large Stainless Steel Backing Plates 10-1476-40WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

EVO-FX Fixed Rod Holder with 8.5" at 15 DegreesCrafted with the highest quality materials to ensure a secure and reliable fishing experience. Its sturdy design and easy installation make it the top choice for professional anglers. Upgrade your fishing gear and trust in its durability and stability for a successful fishing trip.Features: Rod Sleeve: Rolled and polished, seamless 316 stainless steel. Bearings: Injection molded ultra-high molecular weight polyethylene for ultra-high wear, chemical, compression, and shear resistance. Base Plate: Precision cast, stamped, machined, and polished 316 stainless steel. Top Cover: Precision cast, machined, and polished 316 stainless steel. Isolation Gasket: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. Locking lever: Precision cast, machined, and polished 316 stainless steel. Locking lever cover: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. M x 7.5mm 316 stainless steel Phillips drive, countersunk screw, nut, and washer. Sleeve Guide: Resilient rubber blend, designed specifically to be very tough and wear-resistant. Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 9"W x 13"L WT: 3.1 lbs UPC: 835719003697

Read more less

Elite Screwless Stainless Steel 0° Rod & Cup Holder - Drain - Round Top*Must have access to underneath side of gunwale for installation*Features 316 Stainless with Round Top 0º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 0 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 6"H x 7"W x 15"L WT: 3.6 lbs UPC: 857515002186 Quick Guide (pdf)

Read more less

254MMINI Rod HOlder Height ExtenderThe "Mini Extender" allows you to lift your Scotty Rod Holder off the deck, allowing full movement and versatility. The "Mini Extender" works perfectly to eliminate the possibility of your rod interfering with an inconvenient rail position or other obstruction. For use with all Scotty Post mount rod holders. Extends the height of a rod holder by 4-1/4"

Read more less

Flared Weld-On Rod Holder 9-3/4"L x 1-3/4"ID - White Liner Polished Finish - 3/8" Coped BladeTaco Marine weld-on Aluminum rod holder is Brite Dip anodized for lasting protection and superior luster. Specially formulated, fungal-resistant PVC liners are tapered to fit snugly with flared rod holder design. Taco Marine Rod Holders with flared design allow for easy rod placement. Welded I-Beam pin construction seats rod butt securely in place and is proven to be 2-1/2 times stronger than competitive rod holders.Features: Brite Anodized Aluminum Ideal for welding to towers, t-tops, radar arches, railings, and leaning posts Flared style with 3/8" Coped Blade Welded I-Beam securely seats rod butt Includes form-fitted PVC anti-fungal white liner Three year limited warranty Made in USA This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Aluminum Finish: Silver Box Dimensions: 3"H x 4"W x 10"L WT: 1.2 lbs UPC: 630838028855

Read more less

Stainless Cast Steel Flush Mount Rod Holder with Cap - 30° The unique design of the cast stainless mounting flange allows the use of a gasket to reduce leakage that is common on other cast rod holders. This Flush Mount Rod Holder with Cap is constructed of corrosion resistant investment cast 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 1-1/2" Finish: Polished Length (Inches): 3-5/9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 12"L WT: 1.45 lbs UPC: 035514325042

Read more less

Power LockScotty's most popular value-priced, positive-locking, open style rod holder. Fibre reinforced engineering nylon, offers strength, resilience and reliability.No. 230Includes No. 241 combination deck or side mount Specifications: Construction: Plastic Box Dimensions: 3"H x 7"W x 11"L WT: 1.35 lbs UPC: 062017012308

Read more less

StrikerDesigned for Muskie, Halibut, Sturgeon and other big game fish. Stainless steel reinforced post, larger opening with easy lock / unlock ring. The inner support rotates with the rod to instantly remove and "strike" simultaneously. Complete with No. 241 combination deck / side mount.240Striker Rod Holder with No. 241 combination deck or side mountWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel 30° Rod & Cup Holder - Open - Round TopFeatures 316 Stainless with Round Top 30º Rod Angle Open at Bottom Specifications: Angle: 30 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 5"H x 7"W x 15"L WT: 3.2 lbs UPC: 857515002001 Quick Guide (pdf)

Read more less

Stainless Steel 30° Rod & Cup Holder - Drain - Oval TopFeatures 316 Stainless with Oval Top 30º Rod Angle 3/8" NPT Drain Fitting Specifications: Angle: 30 Degrees Construction: Stainless Steel Mounting Style: Gunwale Box Dimensions: 6"H x 7"W x 15"L WT: 3.6 lbs UPC: 857515002025 Quick Guide (pdf)

Read more less

Stainless Steel Rod HoldersWith 1/2" Pipe Threaded Drain HoleThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place ANGLE: 0° LENGTH: 10-1/2" I.D.: 1-7/8" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Mounting Style: Flush Box Dimensions: 5"H x 5"W x 16"L WT: 3.1 lbs UPC: 768296005559

Read more less

Side Mount Rod Holder - Black Constructed of injection molded polypropylene. These Side Mount Rod Holders have an integral, molded-in standoff located on the back of the rod holder, allowing direct mounting to any flat surface. Accommodates rods up to 1-3/4” in diameter. Installs with two #10 RH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Plastic Diameter (Inches): 1-3/4" Finish: Black Length (Inches): 11-11/16" Mounting Style: Surface Box Dimensions: 5"H x 6"W x 16"L WT: 0.25 lbs UPC: 035514325158

Read more less

9" 0-Degree Rod Holder - Screwless - Stainless SteelFeatures: 316 Stainless Steel 2-1/8" Cut Out Requires Installation Wrench

Read more less

Narrow Gunnel Flush Mount Rod Holder - Black These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle and designed for narrow gunnel applications while accommodating rods up to 1-5/8”. Installs with three #10 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Construction: Plastic Diameter (Inches): 1-5/8" Finish: Black Length (Inches): 10" Mounting Style: Flush Box Dimensions: 3"H x 6"W x 13"L WT: 0.25 lbs UPC: 035514326674

Read more less

Flush Mount Rod Holder - 0 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl LinerThese larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place.Features: 316L stainless steel 1/2 in. threaded drain Specifications: Angle: 0-degrees Length: 9 in. Inner Diameter: 1-5/8 in. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 4"H x 5"W x 14"L WT: 2.15 lbs UPC: 768296005528

Read more less

Aluminum Horizontal Clamp-On Rod Holder 1-5/16" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10" Finish: Powder Coat Diameter (Inches): 1-5/16" Construction: Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010607

Read more less

Aluminum Clamp-On Rod Holder - Horizontal - 1.90" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 10" Mounting Style: Clamp Box Dimensions: 3"H x 10"W x 13"L WT: 1.6 lbs UPC: 768296009755

Read more less