Adapter Cable - 25-Pin to 7-Pin - CP370 Transducer to Axiom RVThe Raymarine transducer adapter cable allows you to keep your existing 600w Airmar transducer used with a CP370 sonar module and adapts it to your Axiom RV. The 7-pin side connects direct to your Airmar 600w transducer and the 25-pin to the transducer port on the Axiom RV.Features: Allows your existing Airmar 600w transducer to be used on Axiom 7 RV 7-pin to 25-pin adapter Compatible with 600w , DSM300, CP300 and CP370 sonar transducers Specifications: Type: Adapters Box Dimensions: 1"H x 8"W x 12"L WT: 0.4 lbs UPC: 723193817216

Read more less

Adapter Cable for Axiom Pro with CP370 TransducerUsed to connect a conventional 600W transducer to an Axiom Pro multifunction display. 11-pin to 8-pin adapter cable to attach to an existing 8-pin Airmar CP370 style transducer to Axiom Pro. Specifications: Type: Adapters Box Dimensions: 1"H x 9"W x 12"L WT: 0.35 lbs UPC: 723193817278

Read more less

iTC-5 Instrument Transducer ConverterThe iTC5 Instrument Transducer Converter enables the use of common analog transducer signals with new digital instrument displays like Raymarine's i70 and ST70 Plus. The ultra-compact iTC5 has connections to host the five most common analog transducers; depth, speed/temperature, wind, compass and rudder. The iTC5 instantly converts these 5 analog signals to digital SeaTalkng protocol.In addition to providing analog-to-digital conversion, the iTC5 provides all of the necessary power and communications connections to the transducers. This greatly simplifies the installation of new systems, and also provides a simple and cost-effective means for owners of older analog instrument displays to upgrade to the latest digital display technology. The iTC5 eliminates the need for expensive "smart" transducers or individual instrument pods. Complete control for calibration and alarms is performed through the i70 or ST70 Plus instruments.The iTC5 connects to Raymarine's SeaTalkng network and works with most analog transducers from legacy Raymarine ST30, ST40, ST50, ST60, ST80 and ST290 series instruments. Additionally the iTC5 works with Raymarine fluxgate compass modules as well as rotary and linear rudder feedback transducers to support compass heading and rudder angle instruments.Features: All-in-one analog to digital converter for depth, speed/temperature, wind, compass and rudder transducers Outputs SeaTalkng and NMEA2000 data to digital instruments, MFDs and more Enables easy upgrade of legacy analog instrument displays without replacing transducers SeaTalkng network provides all necessary power and data connections Ideal for use with Raymarine i70 and ST70 Plus digital instrument systems Specifications: Type: Misc Box Dimensions: 2"H x 7"W x 9"L WT: 1.2 lbs UPC: 723193701164 Quick Guide (pdf)

Read more less

Rotary Rudder ReferenceReplacement Rudder Reference Transducer used on Raymarine and Autohelm autopilot systems. Includes 10 meter cable and mounting hardware. Specifications: Type: Parts Box Dimensions: 4"H x 4"W x 14"L WT: 1.4 lbs UPC: 023193811055 Quick Guide (pdf)

Read more less

Suncover for Cruise 9Protective suncover for Cruise 9" displays. Specifications: Type: Covers Box Dimensions: 1"H x 7"W x 12"L WT: 0.35 lbs UPC: 9420064105281

Read more less

Suncover for i70s & Retrofitted i50, i60, i70 & p70Raymarine Grey protective suncover for the i70s and retrofitted i50, i60, i70 and p70. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 5"W x 5"L WT: 0.3 lbs UPC: 723193812365

Read more less

NMEA Starter Kit Network starter kit. Includes 2 terminating resistors (TR-120M-RD, TR-120F-RD), two T-connectors (N2K-T-RD), one 2 ft extension cable (N2KEXT-2RD), and one 15 ft extension cable (N2KEXT-15RD), and a power node (N2K-PWR-RD). For use with all Red network devices. Compatible With: GlobalMap 5200C, GlobalMap 5300C iGPS, GlobalMap 7200C, GlobalMap 7300C HD, GlobalMap 8200C, GlobalMap 8300C HD, GlobalMap 9200C, GlobalMap 9300C HD, HDS-10, HDS-10m, HDS-5, HDS-5m, HDS-5x, HDS-7, HDS-7m, HDS-8, HDS-8m, LCX-112C, LCX-113C HD, LCX-37C, LCX-38C HD, LMS-520C, LMS-522C iGPS, LMS-525C DF Specifications: Data Interface: NMEA 2000 NMEA 2000 Connectors: Starter Kits Box Dimensions: 2"H x 4"W x 9"L WT: 1 lbs UPC: 042194533490

Read more less

Zeus® S 12 Chartplotter/Fishfinder without TransducerThe Zeus® S has been designed with the cruiser, racer, monohull, and multihull sailor in mind, providing a new intuitive user experience with user modes to easily get the best experience while sailing.The bright, sunlight viewable, touch screen combined with the new C MAP® Reveal X cartography enables new features and each sailing feature has been reimagined to be more capable and more intuitive.All are powered by the latest quad-core microprocessors that allow Instrument, Radar, Sonar and Charting features to all work seamlessly Features: 12V power supply - 4 pins with yellow ignition Latest industrial-spec Quad-core microprocessors NMEA2000 compliant interface (Micro-C) Ethernet, 100mbps, waterproof Dual Wi-Fi (802.11g) for Over The Air software upgrades and B & G App support Waterproof Micro SD card slot IP67 Environmental rating USB Port Zeus s 9 and 12 only Sonar- CHIRP/Single Frequency, StructureScan, ActiveImaging, and Totalscan support Internal GPS with sail-specific filtering and 10Hz position updates. GLONASS, Galileo, Beidou, and QZSS constellation support for highly-accurate positioning worldwide 12" Ultra-bright IPS SolarMax HD display Touch screen for quick and simlple operation. Includes touch-lock feature Compatible with the latest CMAP® Discover TM X and Reveal TM X cartography providing up-to-date charting detail with a clean and modern look.Powerful Chart Overlays For: Radar High-Resolution Bathymetric contours (HRB) Shaded Relief* Satellite Imagery* Chart Features: Chart Safety Alerts Tides and Currents Night Mode Chart Inspector tool Subscription-free Auto-routing        *CMAP Reveal ™X only - Some features require additional system components (e.g. radar). Custom depth-shadingSailing Features:User Experience Simple Home screen with easy-to-find features Sailing modes - Cruise & Race, just the data you want Multihull & Monohull characterization Night mode optimized for low light conditions Configurable to suit your requirements Charting Clear CMAP Reveal X charts Safety Alerts Laylines with wind history Sailing Time to the Cursor position Chart orientations: Wind up; Target up; Start Line up Instruments Sailing dashboards Dashboard editor SailSteer™ gauge Tide Gauge Data Bar - prestart, upwind, reaching, downwind Triton® Edge integration Rotating mast support for wind and radar Racing Quick race entry Race Overview Race timer GPS start timer Start line tools Cruise Mode inhibits race features for a clean display of the right tools at the right time Chart Safety Alerts Sailing Laylines SailingTime & Distance to Cursor Subscription - free auto routing Tides & Currents Chart Inspector Race Mode enables additional features for racing = the right tools at the right time Start lIne Race Timer Quick Route Entry Race Overview Sailing Modes Easily switch between Cruise or Race sailing modes Race mode enables additional features: Quick race route entry Port / Starboard waypoint rounding indicators Race leg(s) overview  Start line chart overlay with: Set the start line Apply GPS offset for bow position Bias indicator tide and wind indicators Race Timer Countdown timer Start/Stop/Sync/Reset Countdown to GPS start time Safety AlertsThe Safety Alerts feature included with Zeus S can constantly monitor your course for dangerous chart objects no matter what your speed, zoom level, or view. Whether it’s a buoy, shallow water, rocks, or land Zeus S can warn you in advance. CMAP® Discover  X and Reveal  X charts provide detailed chart data available at all times to Safety Alert Alerts provide the sailor with awareness of potentially dangerous charted objects above and below the waterline Automatically identify charted objects which are of concern, warning, or critical based on their relative time and distance ‘Harbor’ and ‘Offshore’ modes allow Zeus S to automatically change the time and range sensitivity based on the use  Ideal for use in unfamiliar waters or at night when visibility is reduced to identify dangerous objects. Quick Race Entry Quickly create a race route from the sorted list of waypoints Easily add port and starboard rounding indicators Intuitively add, remove or reorder a race route Use the Race overview tool to brief your race crew with expected wind angles and estimated sailing time for each race leg to aid decision-making and sail selection Start line The powerful Zeus Start Line tool is now chart based to allow navigational awareness during the start procedure Start line view, including laylines, favored end, tide set & rate, and True Wind Direction The chart dynamically orientates and zooms to ensure the boat and start line are in view Calculations are based on the yacht’s Bow Position via an offset distance for the GPS Zeus S Internal GPS (or optional external options) provides precise position 10 times per second Simple setup - set the port and starboard start line end positions via a button press (“ping”), waypoint, or cursor Easily return to view the start line on the chart via an edge marker Zeus S automatically captures your distance to the line when the race timer reaches zero The following start line data is calculated and displayed:  Distance behind the line (boat lengths or meters) Distance to port & starboard ends Start line Bias to True Wind Direction Bias advantage Race TimerRace Timer provides a flexible and integrated tool for starting and monitoring race duration Quickly adjust the race timer start value Set the race timer to countdown to a GPS-based start time. e.g. 1900h The race timer control is available from networked devices Start, Stop, Sync [to nearest minute] and Reset functions Automatically starts a stopwatch when the race timer reaches zero to track race duration Chart OrientationEasily rotate the chart to aid understanding and make better decisions for your route or race course.Single touch rotates between: North up Heading up Course up (Course over Ground) Target up (Waypoint) Wind up (True Wind Direction) Start line up LaylinesB & G pioneered laylines in chart plotters with the original Zeus®. Zeus S laylines provide a powerful decision-aiding tool. Overlay your target sailing angles, upwind or downwind, to your destination on the chart Enable wind history to show a wind shift heat map, which intensifies the colors over time to show the history of true wind direction Mini Inspect (short press) a layline to gain detailed target sailing angles, speed, SailingTime, and distances Full Inspect provides detailed sailing information on current and opposite tacks Apply tidal correction to layline calculations Display laylines using actual data or input targets. Time to CursorHave you ever wanted to know how long it will take to sail to a location on the chart or do you need to tell your race crew how long to go?Simply place the cursor anywhere on the chart to show an estimated sailing time and distance information to the cursor position.Ideal, when you’re navigating to a waypoint and you need to know the sailing time to a secondary position.Tide GaugeNeed to know the state of the tide quickly? Zeus S provides at a glance tidal data Graphically see a tidal histogram including current time indication in the instrument data bar Choose between the automatic selection of the closest tidal station, or selecting a specific station More detailed tidal data is available via the chart icons Wind PlotDedicated wind charts for monitoring wind history and assessing trendsUser configurable options include: Show Trend lines Show tack color (port/starboard) Show Average Min, Max, and current value Time range 1,5,10,30 or 60 minutes B & G Companion App Download the latest B & G App Plan & review your waypoints and routes using the latest C Map® Reveal X charts Seamlessly synchronize waypoints and routes between products Review your sailing data from Triton® Edge Register new products and access support information Complete product software updates Triton Edge IntegrationAdding a Triton® Edge Sailing processor to your system provides advanced wind, calibration, and data recording. Zeus S provides seamless integration with Triton Edge. Display all B & G NMEA2000® performance sailing data Seamlessly access the web interface on Triton ™Edge Control and system setup Perform advanced calibration Control data recording Connect via Ethernet or Wi-FiWhat's In The Box? Zeus S display unit Panel mounting kit Sun Cover Corner clips Power Cable (2.0m) Fuse holder and fuse Installation guide and quick star documentation Mounting U bracket Specifications: Cartography Brand: C-Map Reveal X Screen Size: 12" Touchscreen: Yes Transducer Included: No Box Dimensions: 12"H x 17"W x 19"L WT: 11.25 lbs UPC: 9420064110117 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

B953 Class B AIS Transceiver - 5W SOTDMA with VHF Antenna Splitter**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**Click here to download form.The B953 is a high transmit power (5W SOTDMA) AIS Class B transceiver that is small, and lightweight, yet delivers the very best AIS receive and transmit performance so you see more AIS information and targets at maximum range – all achieved with the least power consumption.The B953 has an integrated VHF antenna splitter which enables the transceiver to share your existing VHF antenna without any loss of performance. With built-in intelligent connectivity, integrated next-generation GPS receiver & antenna, and a unique FLEXI-FIT bracket system, safe and secure installation is simple.Features: Certified AIS Class B – 5W SOTDMA Integrated VHF antenna splitter Global certification - USCG / FCC / Canada / Europe SRT-AIS™ Transceiver Engine for superlative proven performance FLEXI-FIT™ bracket system for easy, convenient, and secure installation Internal high-performance GPS receiver and antenna (external antenna optional) Water, pressure spray, and damp proof (IPx6, IPx7 certified) Protected from vibration, shock, and extreme temperatures Small and lightweight Ultra-low power consumption – best in class Guaranteed connectivity and interoperability with any chart plotter or PC NMEA 0183 & NMEA 2000 Automated health and performance monitoring Silent mode (transmit-off) function Enhanced RF screening to protect against electromagnetic interference Built-in power surge protection Fail-safe VHF radio operation Physical & Environmental Specifications: Size (H x W x D): 150 x 115 x 45mm Weight: 415kg Operating temperature: -25°C to +55°C Storage temperature: -25°C to +70°C Ingress protection: IPx6 and IPx7 Electrical Specifications: Supply voltage: 12V or 24V DC Supply voltage range: 9.6V - 31.2V DC Average current (at 12V): 245mA Peak current: 2.5A Average power consumption (at 12V): 2.9W Galvanic isolation: NMEA 0183 inputs only, NMEA 2000, VHF antenna port Connectors: VHF antenna: SO-239 GNSS: TNC Power: 12-way circular multipole NMEA 2000: 5-way Micro-C connector USB: USB Micro-B Data Interfaces: NMEA 0183: 2 x bi-directional ports NMEA 2000: NMEA 2000 Ed 3.101, LEN=1 USB: PC virtual com port for NMEA 0183 data Standards Compliance: AIS standards: IEC 62287-2 Ed. 2, ITU-R M.1371.5 Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008 Environmental standards: IEC 60945 Ed. 4 Serial data interface standards: IEC 61162-1 Ed 5.0, IEC 61162-2 Ed 1.0 NMEA 2000: NMEA 2000 Ed 3.101 GNSS performance standards: IEC 61108-1 Ed 2.0, IEC 61108-02 Ed 1.0 GNSS: Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo) Channels: 72 Internal/external antenna: Internal or optional external antenna Time to first fix from the cold start: 26s VHF Transceiver: VDL access scheme: SOTDMA Operating frequency: 156.025MHz - 162.025MHz Channel bandwidth: 25kHz Receivers/transmitters: 2 x receivers, 1 x transmitter AIS receiver sensitivity (20% PER): -111dBm AIS transmitter power: 5W (+37dBm) User Interface:Indicators: Power, transmit timeout, error, silent modeIn the Box: 1 x AIS transceiver 1 x Power and data cable (2M) 1 x VHF radio accessory cable 1 x FLEXI-FIT™ mounting bracket Complete with screws & optional fixing tape This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: AIS Class: B Antenna Included: Yes Display Included: No Function: Receive/Transmit GPS Included: Yes Box Dimensions: 5"H x 7"W x 8"L WT: 1.9 lbs UPC: 672975210564 Quick Guide (pdf)Brochure (pdf)

Read more less

52MM (2-1/16") ViewLine Transmission Oil Pressure 25 Bar/350 PSI - Black Dial & Round BezelVeratron ViewLine offers a comprehensive modular, modern series of instruments for engine monitoring.More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, we offer an innovative comprehensive standard instrumentation platform which is also available for outboard engine use.  ViewLine provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.The ViewLine 52 mm Gauges are available in black or white dial versions, which are always completed with a round bezel in identical color. Interchangeable bezel option.Features: 8 pole Tyco/Hirschmann MQS plug  Red LED Via Plus And Min Warning Light Operating voltage 8–32 V  Input signal: standard Ω values  Optional make-point switch can be connected  Reverse polarity protection  Anti-fog double lens  Front side protection rating IP67  52 mm installation diameter  50 mm installation depth  In the Box: Gauge Connection Cable Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Series: ViewLine Gauge Type: Oil Pressure Gauge Size: 2-1/16" Box Set: No Box Dimensions: 3"H x 3"W x 4"L WT: 0.3 lbs UPC: 7640178722996 Owner's Manual (pdf)

Read more less

GPS160 TriNav Sensor with SeaTalk Interface BundleThe GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.TriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etcThe GPS160 is available with a NMEA 0183 output (4800, 38400 and 115200 baud programmable) and a USB variant for PC, MAC and Linux. For NMEA 2000 systems, a bundle is available with iKonvert allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables.The GPS160 also support an external MOB switch or device. When activated, it creates a “synthesized” AIS SART MOB message on the NMEA output which can be interfaced with a local plotter for MOB identification.The GPS160 supports GPS, Glonass and Galileo positioning. Our TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability.Galileo is the global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.Features: 72 channel GPS, Glonass and Galileo GNSS positioning receiver Typically sub 1m accuracy thanks to TriNav technology –combines all satellite data for optimum accuracy Can be configured as dedicated GPS, Glonass or Galileo only device Sophisticated anti-spoofing algorithm for robust positioning performance and interference rejection Available in NMEA 0183, NMEA 2000 (with iKonvert interface)and wireless (with WLN10SM) variants GPS160USB also available with USB connection for PC/MAC User/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches Multiple formats of NMEA data output including datum information –user configurable through internal DIP switches Up to 18Hz update rate (user selectable) Ultra low (<20mA) power consumption at 12V DC Input for MOB switch/system –when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter Professional system (ECDIS) support with datum sentence structure (DTM/GBS/GNS/GRS/GSA/GST) Puck installation or fits 3rd party industry standard 1” x 14TPI threaded mount Brochure (pdf)

Read more less

FCV600 CHIRP Fish FinderThe 5.7” FCV600 is capable of driving either a CHIRP or dual-frequency CW (continuous wave) transducer, allowing users to configure the fish finder to suit almost any need. With a sleek, piano-black presentation, comfortable rubber keys, and a robust rotary knob controller, the FCV600 gives users the freedom to choose from a wide variety of transducers. The soft-touch keys are inclined at the top and bottom, making them comfortable to press while creating an easy-to-operate and intuitive system.Sunlight and yellow color palettes offer greatly improved visibility in daylight and for those who deal with color blindness. The Color Range Expansion feature broadens the range of discrete signal intensities that can be detected and paints them in different colors. With color range expansion, the range of identifiable echoes is expanded, so you can intuitively identify bottom fish from the seabed.Furuno’s RezBoost™ signal processing technology produces a picture that is up to 8 times clearer, breathing life into the standard CW transducer users may already have installed. A second FCV600 display can be installed to show the echoes and nav data from the FCV600 via the built-in wireless network. This simple yet powerful solution allows for continuous monitoring of the underwater situation from the stern or bow while fishing with a simplified installation.Features: 5.6” (FCV600) TruEcho CHIRP/CW Fish Finder Drives either a CHIRP or CW transducer Color palettes offer unbeatable daylight visibility Color Range Expansion displays returns from more discreet signal frequencies for unbeatable target separation RezBoost™ signal processing produces a picture up to 8 times clearer Wireless 2nd display capability Heave correction with the satellite compass This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Screen Size: 5.7 Transducer Included: No Box Dimensions: 9"H x 11"W x 12"L WT: 5.6 lbs UPC: 611679401649

Read more less

MDA-5H Hi-Power 5W SOTDMA Class B AIS Transceiver with Built-In Antenna Splitter (without Wi-Fi)**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**Click here to download form.MDA-5 Hi-Power 5W SOTDMA Class B AIS Transceiver w/Built-In Antenna Splitter (Without WiFi)Features: The MDA-5 is the world's most sophisticated fully certified 5-Watt SOTDMA Class B AIS Mobile on the market 5-Watt transmitter power, Higher Output power means your vessel will be seen at longer ranges by other vessels and via AIS websites SOTDMA Class A Priorities means that your vessel will always transmit and be seen in very congested Commercial Harbors and Ports where traditional Class B units don't have network priority. Integrated zero loss VHF antenna splitter - no second antenna needed NMEA-0183 data port, NMEA-2000 & USB intelligent connectivity to all bridge systems Built-In GPS & GLONASS satellite navigation receiver Water Proof certified to IPX7 Dual Receivers decodes all DSC & AIS messages, including MOB & SART Ultra-power efficient IEC-62287-2, FCC, and USCG certified 2 Year Warranty Package Includes: Commercial Grade External GPS Antenna with Coax Cable Mounting hardware Power & Data Interface cable VHF Radio Connection cable Product Information DVD, with ProAis2 Software for Programming & Troubleshooting User Manual & Quick Start Guide Specifications: Transmitter Output Power: 5 Watts VHF Antenna Connector SO-239 UHF GPS Antenna Connector TNC Frequency Range: 156.025-162.025 Mhz Input Voltage: 9.6-31.2 VDC Current Draw: 220mA average power consumption Operating Temperature Range: -25C to +55xC Ingress Protection: IP67 Dimensions (transceiver): 6.8" W x 5.0" H x 2.0" D Weight 0.8 lbs. Specifications: AIS Class: B Antenna Included: No Display Included: No Function: Receive/Transmit GPS Included: Yes Box Dimensions: 5"H x 9"W x 14"L WT: 3.25 lbs UPC: 010407510712

Read more less

Transom Mount Multi-Beam TransducerThe 165T-TM54 is a multi-beam transducer for the DFF3D that affords a 120 degree port-starboard view of the underwater world. A built-in motion sensor stabilizes the display to give clear and stable images.Features: Transom mount with stainless steel kick-up bracket DFF3D operating frequency: 165 kHz 2 x 10M Cables Bare ended cable for DFF3D sonar 7 pin connector for the motion Built-in motion sensor Built in temp sensor WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

NMEA 2000 Single Device Starter KitAncor's NMEA 2000 Starter Kits include all components needed to create a single device NMEA 2000 network. 1 meter power cable with tee, item# 270000 Male and female terminators (1 each) item# 270105 and 270106 One single tee connector, item# 270101 One 2 meter drop cable, item# 270302 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Data Interface: NMEA 2000 NMEA 2000 Connectors: Starter Kits Box Dimensions: 3"H x 5"W x 8"L WT: 0.8 lbs UPC: 091887982381 Brochure (pdf)

Read more less

JCU3 Compact Joystick for M100/200 - Raymarine RayNet NetworkFLIR’s JCU-3 Joystick Controller works with select Thermal Camera Systems to allow full access to the camera’s pan, tilt, zoom and menu settings.  The JCU-3 features 9 buttons plus a rotary controller and joystick trackpad in a compact housing the fits just about anywhere.  The JCU-3 can be mounted either horizontally or vertically using either of the 2 supplied key faces.The JCU-3 is rugged and waterproof for mounting in the pilothouse or on-deck.  It can be surface or flush mounted to your helm, console or bulkhead.  Multiple JCU-3 controllers can be installed to allow control of a single camera from several different locations onboard.The JCU-3’s keypad and rotary knob are backlit for easy viewing at night.  The JCU-3 can bepowered over Ethernet from the vessel’s onboard network, or connected directly to a 12V DC power source and interfaced to the camera with an Ethernet connection.    The JCU-3 is compatible with FLIR M100, M200 (M132, M232) M300, (M300, M332, M354, M364c, M364C LR.

Read more less

Suncover for Cruise 5Protective suncover for Cruise 5" displays. Specifications: Type: Covers Box Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbs UPC: 9420064105267

Read more less

ST60+ Sun CoverFits standard surface mounted ST60+ instruments

Read more less

Protective Cover for STRIKER™/Vivid 9" UnitsUse our cover to protect your compatible STRIKER™ from the harsh marine environment when not in use. Specifications: Type: Covers Box Dimensions: 2"H x 7"W x 14"L WT: 0.55 lbs UPC: 753759275624

Read more less

NMEA 2000 Dual Device Starter KitAncor's NMEA 2000 Starter Kits include all components needed to create a dual device NMEA 2000 network. 1 meter power cable with tee, item# 270000 Male and female terminators (1 each), item# 270105 and 270106 One dual tee connector, item# 270103 Two 2 meter drop cables, item# 270302 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Data Interface: NMEA 2000 NMEA 2000 Connectors: Starter Kits Box Dimensions: 3"H x 5"W x 8"L WT: 1 lbs UPC: 091887982398 Brochure (pdf)

Read more less

White Replacement Bottom Housing Section for NightwaveReplacement bottom housing section (Housing Only). Available in multiple colors, including white, black, and grey. This is a SIONYX official accessory.

Read more less

Honda 5, 8, 9.9. 15 (1980-2000)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Mercury 15, 20 Remote Shift/Throttle & Tiller (2011-Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Spacer Kit for Type T System - 0.51"Features: 13mm (0.51") Spacer Kit Use with 90° bezel Specifically for Type T System Specifications: Type: Parts Box Dimensions: 1"H x 5"W x 5"L WT: 1 lbs UPC: 628309133788

Read more less

Chesapeake White SS 4" Tachometer with Hourmeter (4000 RPM) (Diesel) Mech. Takeoff & Var. Ratio AltPerimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12vDC, Ground and one of the signal sources listed above.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.4" - Hole size: 3.375" (85mm)Specifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life 12 VDC negative ground Can be adapted for 24 VDC systems Scale - 0 to 10000 Hours Factory P/N TD9108*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer - Diesel Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Set: No Series: Chesapeake White Box Dimensions: 5"H x 5"W x 6"L WT: 0.7 lbs UPC: 759266338340

Read more less

4.1" High Bright Color Display - BlackMaretron’s DSM410 is a 4.1” high-resolution sunlight viewable color display that interprets and displays NMEA 2000® instrument, navigation, and vessel monitoring data. The DSM410 is a user friendly dedicated marine display with custom screen configurations and an easy-to-use five-key illuminated keypad. In addition to the monitoring and display capabilities, the DSM410 features an alert/alarm package and electrical switching capability.Unlike traditional single-display units, DSM410 users can choose numeric, gauge, bar or graph formats in single or multiple displays, with cycling options possible for a wide range of favorite data. These multiple display options conserve mounting space and reduce overall system cost.The DSM410 will directly connect with any NMEA 2000® network and with the exception of AIS data will display any or all information captured throughout the vessel. Various audio and visual alarms are also programmable.The DSM410 displays a multitude of information including AC power, anchor status, battery, depth, electrical distribution, engine, environment, fuel management, GPS, heading, navigation, pressure/vacuum, rudder, speed, status indicators, tanks, temperature, time, transmission, water makers, weather, wind and more.The DSM410 includes a comprehensive, flexible alert capability. Configure audio and visual alerts on virtually any data that the DSM410 is capable of monitoring. Available alert types include: High alert Low alert Data unavailable alert On alert Off alert Circuit breaker tripped alert Course alert GPS quality alert Outside radius alert Inside radius alert Direction alert Timer alert The DSM410 is capable of sharing alert information with other DSM410 units as well as any DSM150, DSM250 and N2KView® installations on the network. An alert defined on any device can be acknowledged on any other device on the network.Maretron's DSM410 is engineered and manufactured to the highest standards (IEC 60945 Maritime Navigation and Radiocommunication Equipment). Its compact waterproof housing will provide years of reliable performance.Examples of data that the DSM410 can display are: AC power (Average Frequency, Voltage and Current, Phase-Neutral Frequency, Voltage and Current, Phase-Phase Frequency, Voltage and Current Anchor Watch Battery / DC (Voltage, Current, Battery Temperature, Battery State of Charge, Battery Time Remaining, Ripple Voltage, Power) Depth (Water Depth, Depth below Transducer) Electrical (Resistance) Electrical Distribution (Switch/Breaker, Breaker Current, On/Off/Error Counters, On/Off/Error Timers) Engine Monitor (Boost Pressure, Hours, Coolant Pressure, Coolant Temperature, Exhaust Gas Temperature, Fuel Pressure, Fuel Rate, Oil Pressure, Oil Temperature, Tachometer, Tilt/Trim, Voltage, Fuel Econmony, Fuel Consumption, Percent Load, Percent Torque, Trip Fuel Used, Warning Indicators) Environment (Barometer, Heat Index, Humidity, Temperatures, Wind Chill) Fluid Flow (Flow Rate, Trip Volume) Fuel management (Distance to Empty, Time to Empty, Total Fuel Capacity, Total Fuel Level, Total Fuel Consumption, Total Trip Fuel Used, Total Fuel Economy, Total Fuel Remaining) GPS (COG, Lat/Lon, SOG, Satellites, Time, Accuracy) Heading (Heading, Rate of Turn, Variation) Humidity (Inside, Outside, User Defined Indicators (Status, , On/Off/Error Counters, On/Off/Error Timers) Mechanical (dB, Force, Strain) Motion (Acceleration, Angle, Angular Velocity, Angular Acceleration, Distance, Rotation Rate, Velocity) Navigation (BOD, BTW, COG, XTE, DTW, ETA, Lat/Long, Rolling Road, Set/Drift, SOG, TTG, VWG, Waypoint Number and Name) Pressure / Vacuum Rudder SMS (Status, Signal Strength) Speed (Through Water, Over Ground, Total Log, Trip Log) Tanks (Capacity, Level, Remaining) Time (Local, UTC, Moon Phase, Sunrise, Sunset, Twilight) Transmission (Gear, Oil Pressure, Oil Temperature, Warning Indicators) Vessel (Heave, Pitch, Roll, Trim Tabs, Keel) Watermaker (Sea Recovery Status display) Wind (Apparent direction and speed, True direction and speed, Groud direction and speed) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Instrument Function: Multifunction Box Dimensions: 4"H x 5"W x 7"L WT: 1.28 lbs UPC: 873804003757 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

52MM (2-1/16") OceanLink Coolant Temperature Gauge (250°F) - Black Dial & BezelOceanLink 52 mm Vessel Status Gauges are connected directly to any OceanLink Master unit using the patented EasyLink serial bus connection.  Up to 16 EasyLink gauges for each Tachometer or GPS Speedometer can be daisy-chained together.  Interchangeable bezel option. Features: AMP Superseal Easylink 270° pointer deflection angle Reverse polarity protection Anti-fog double lens Front & rear protection rating IPX5 Operating temperature range -20 °C / +70 °C Nominal voltage - 12/24V Hole diameter - 52MM In the Box: Gauge Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Water Temperature Voltage - Input Range (Volts): 12/24 V Gauge Size: 2-1/16" Box Set: No Series: OceanLink Box Dimensions: 4"H x 5"W x 6"L WT: 0.35 lbs UPC: 7640178721081

Read more less

RNS-8 Network Switch - 8 Port Raynet Network SwitchThe RNS-8 network switch is a premium network switch for integrated Raymarine chartplotter systems. Use the RNS-8 to integrate Axiom displays with radars, sonar modules, and FLIR thermal cameras. The RNS-8 features 4 dedicated Power-Over-Ethernet (POE) ports for integrating and powering POE-compatible devices like CAM300 marine IP cameras and RMK-10 remote keypads. The RNS-8 also supports networking with Raymarine YachtSense digital control systems and the YachtSense Link marine mobile router. Multiple RNS-8 switches can be daisy-chained together for larger systems. The RNS-8 is simple to install and requires no complicated setup.Features: 8 RayNet Ethernet gigabit ports for fast and reliable connectivity 4 dedicated Power-Over-Ethernet (POE) ports for powering cameras and remotes Rugged IPX6/IPX7 construction Reliable, waterproof RayNet connector Ethernet cable ports Designed for simple bulkhead mounting LED power and network port status indicators Unmanaged- simply plug and play with Raymarine devices. Remote diagnostics and performance monitoring via web browser For extended networks, up to 8 RNS-8 switches can be daisy-chained together

Read more less

Wind Vane & CupsCompatible Devices: Raymarine ST60 ST60+ i60 ST290 Egg-Shape Masthead Transducers

Read more less

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. Specifications: Data Interface: NMEA 2000 Cable Length (Meters): 400mm Box Dimensions: 1"H x 6"W x 8"L WT: 0.05 lbs UPC: 723193060339

Read more less

SeaTalk Interconnect Cable, 3ft. (1m)SeaTalk Interconnect cable for linking SeaTalk devicesSeaTalk interconnect cable for linking SeaTalk devices. Flat style, 3-pin molded connectors on each end.

Read more less

52MM OceanLink Bezel - Round - BlackThe Oceanlink modular bezel concept offers true design flexibility in the layout of instrument panels.  The three attractive designs in Black, White or Chrome are suitable for every machinery instrument panel or special vehicle cockpit. Each of the bezel designs is compatible with 52MM OceanLink products.Features: Color - Black Bezel Profile - Round Size - 52mm Interchangeable Clip System *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Black Diameter (mm): 52 Box Dimensions: 1"H x 4"W x 7"L WT: 0.05 lbs UPC: 7640178721517

Read more less

Zeus® S 15" 3015UW Ultrawide Combo - No TransducerElevate your instincts with the ultrawide display. Zeus® S Ultrawide delivers the most streamlined and immersive sailing experience yet. See the award-winning sailing features as they were meant to be seen – uninterrupted by bezels or dead space. And explore C-MAP® DISCOVER® X and REVEAL® X charts like never before. Intuitive and easy-to-use ChartplotterZeus® S is the most intuitive chartplotter for sailing yet. It comes with unique Sailing Modes with preset dashboards and data for your situation, along with many enhanced sailing features for a simpler sailing experience. All of this is backed up by clear and accurate C-MAP® charting options for the safest and easiest navigation.Next-Gen ChartsC-MAP® X-Gen charts deliver the cutting-edge of navigation. Explore the stunning DISCOVER® X charts, zooming in and out in an instant. Discover new spots with incredible local detail. And explore after dark with a dedicated night mode. An upgrade to the stunning REVEAL® X adds incredible shaded relief and satellite imagery to your arsenal.Revolutionary Safety FeaturesThe X-Gen charts also unlock a host of ground-breaking features, such as the revolutionary C-MAP® Safety Alerts – built to automatically alert boaters to hazards up ahead, from shallow waters to buoys.Ground-breaking Chart ManagementIn an industry first – the X-Chart Manager lets users manage C-MAP® chart updates and upgrades directly from the device, with the ability to choose custom areas for a near-instant download. And there are plenty of updates because X-Gen charts are always evolving, adding new details and features all the time.Superior IntegrationOur latest OS has integration at its core, with seamless networking across the entire boat. Connect to HALO® radars for superior safety and situational awareness. Unlock next-level performance with our Triton® Edge and Hercules sailing processors. And bring the very best data to the helm with our famous wind sensors, which feed into our range of Triton and Nemesis® instruments.Features: High-definition SolarMAX™ IPS Ultrawide touchscreen, viewable from all angles, even with polarised glasses  Separate modes for Cruising, Racing and Anchoring Award-winning sailing features like SailSteer™, LayLines, Race Routes, and StartLine  Compatible with C-MAP® DISCOVER® X and REVEAL® X charts  C-MAP®-powered Safety Alerts Full integration with HALO® radars, B & G® Sailing Processors, Autopilots, Triton® 2, Nemesis® instruments, wind sensors and more... B & G® App integration with 12 months premium subscription when registering a C-MAP® X Chart. Wi-Fi, Ethernet & NMEA 2000® networking IP video camera support Set up Wizard to get you up and running quickly Specifications: Cartography Brand: C-Map Reveal X Screen Size: 15" Touchscreen: Yes Transducer Included: No Box Dimensions: 7"H x 14"W x 22"L WT: 9.9 lbs UPC: 9420064136551 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Zeus® S 12" 3012UW Ultrawide Combo - No TransducerElevate your instincts with the ultrawide display. Zeus® S Ultrawide delivers the most streamlined and immersive sailing experience yet. See the award-winning sailing features as they were meant to be seen – uninterrupted by bezels or dead space. And explore C-MAP® DISCOVER® X and REVEAL® X charts like never before. Intuitive and easy-to-use ChartplotterZeus® S is the most intuitive chartplotter for sailing yet. It comes with unique Sailing Modes with preset dashboards and data for your situation, along with many enhanced sailing features for a simpler sailing experience. All of this is backed up by clear and accurate C-MAP® charting options for the safest and easiest navigation.Next-Gen ChartsC-MAP® X-Gen charts deliver the cutting-edge of navigation. Explore the stunning DISCOVER® X charts, zooming in and out in an instant. Discover new spots with incredible local detail. And explore after dark with a dedicated night mode. An upgrade to the stunning REVEAL® X adds incredible shaded relief and satellite imagery to your arsenal.Revolutionary Safety FeaturesThe X-Gen charts also unlock a host of ground-breaking features, such as the revolutionary C-MAP® Safety Alerts – built to automatically alert boaters to hazards up ahead, from shallow waters to buoys.Ground-breaking Chart ManagementIn an industry first – the X-Chart Manager lets users manage C-MAP® chart updates and upgrades directly from the device, with the ability to choose custom areas for a near-instant download. And there are plenty of updates because X-Gen charts are always evolving, adding new details and features all the time.Superior IntegrationOur latest OS has integration at its core, with seamless networking across the entire boat. Connect to HALO® radars for superior safety and situational awareness. Unlock next-level performance with our Triton® Edge and Hercules sailing processors. And bring the very best data to the helm with our famous wind sensors, which feed into our range of Triton and Nemesis® instruments.Features: High-definition SolarMAX™ IPS Ultrawide touchscreen, viewable from all angles, even with polarised glasses  Separate modes for Cruising, Racing and Anchoring Award-winning sailing features like SailSteer™, LayLines, Race Routes, and StartLine  Compatible with C-MAP® DISCOVER® X and REVEAL® X charts  C-MAP®-powered Safety Alerts Full integration with HALO® radars, B & G® Sailing Processors, Autopilots, Triton® 2, Nemesis® instruments, wind sensors and more... B & G ® App integration with 12 months premium subscription when registering a C-MAP® X Chart. Wi-Fi, Ethernet & NMEA 2000® networking IP video camera support Set up Wizard to get you up and running quickly Specifications: Cartography Brand: C-Map Reveal X Screen Size: 12" Touchscreen: Yes Transducer Included: No Box Dimensions: 7"H x 12"W x 16"L WT: 7.45 lbs UPC: 9420064136537 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

WindTrak AV Antenna Mount Wind VaneWindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system.WindTrak AV installs onto most whip antennas, including Metz and Shakespeare brands, with a whip diameter less than 1/8" (3 mm). Combine two installations into one to reduce masthead clutter, weight, and windage aloft. Rides on low-friction Teflon® bearings. Complete with 15" (38 cm) vane, reflective tacking arms, hardware, and instructions for easy installation. Antenna not included. Specifications: Instrument Function: Wind Type: Wind Indicator Box Dimensions: 2"H x 6"W x 18"L WT: 0.57 lbs UPC: 011698316007

Read more less

CPT-S High CHIRP Plastic Thru-Hull Flush Mount Transducer - 20° AngleThe CPT-S High CHIRP transducer provides high resolution sonar imagery in a small and inexpensive package.  With a simple design, the CPT-S is easy to install, while still offering excellent performance at speed. This CPT-S is a low profile, flush-mounted plastic Thru Hull High CHIRP transducer  compatible with Raymarine's CP100 sonar module and embedded CHIRP MFD's. This single element conical CHIRP transducer provides a 25 degree fish targeting beam with a maximum depth of 900 feet. This model CPT-S accommodates hulls with a deadrise between 15-25 degrees.Also connects to Axiom Pro S series Units with optional adapter cable A80490.Features: High Chirp Sonar Max Depth: 900' 20 Degree Deadrise

Read more less

ST-Ng to DeviceNet MaleSeaTalkng backbone cable to DeviceNet (Male) - 400mm

Read more less

B175H-W 1KW Bronze Thru Hull 20° Tilted ElementInstallation: Thru HullMaterial: UrethanePower (RMS): 1kWMax Depth(ft): 800Frequency (KHz): 150-250Records: Depth and TemperatureApproved Hull Material: Fiberglass / WoodCable Length (ft/M): 6ft/2mSupported deadrise: 16-24° DeadriseADDITIONAL NOTES: All wide beam products come with a 2M pigtail off the transducer. Requires a Transducer Extension cable for a Complete Transducer Installation. 10m Extension Cable part number A80327 and A80328 Single B75/B175 operation cable.  Specifications: Temperature: Yes Speed Included: No Mounting Style: Thru-Hull Imaging: Standard Chirp: High Wide Cable Length (Feet): 6' Box Dimensions: 9"H x 11"W x 12"L WT: 9.8 lbs UPC: 723193796276

Read more less

BlueNet™ 30 Gateway The Garmin BlueNet 30 gateway is required for Garmin BlueNet™ network compatible devices to network with legacy Garmin marine devices. Through this gateway, you can connect a Garmin BlueNet network to a legacy Garmin Marine Network for a premium control experience.In the Box: Garmin BlueNet 30 Gateway Power cable Mounting hardware Garmin BlueNet™ network cable (2 meters) Documentation

Read more less

Autopilot Hydraulic Steering Installation Kit w/Hoses & FittingsHydraulic Hose & Fittings Kit Includes: (2) - 30" Flexible High Pressure Hyd. Hose's (1) - 30" Flexible Low Pressure Hyd. Hose O.R.B Helm fitting kit NPT Helm fitting kit Specifications: Type: Fittings & Hoses Box Dimensions: 2"H x 10"W x 14"L WT: 1.8 lbs UPC: 010407611105

Read more less

Temperature Probe for SST-110 Thru-HullBronze thru-hull temperature sensor for retrofit, 30' cable for 5 pin plugs. Specifications: Cable Length (Feet): 30' Temperature: Yes Speed Included: No Mounting Style: Thru-Hull Chirp: No Box Dimensions: 4"H x 6"W x 7"L WT: 1.04 lbs UPC: 010407330679

Read more less

PumpsetFeatures: 18CU 12V Specifications: Type: Pumps/Drives Box Dimensions: 4"H x 5"W x 12"L WT: 8.26 lbs UPC: 010407610238

Read more less

ST-Ng to DeviceNet FemaleSeaTalkng backbone cable to DeviceNet (Female) - 400mm

Read more less

E120 Classic To Axiom Pro 12 Adapter PlatePowder coated black to match the Axiom, this adapter plate is designed to enable a simple and stylish installation of Axiom Pro 12" multifunction displays in place of a E120 Classic Display. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 13"W x 17"L WT: 1.05 lbs UPC: 723193824962

Read more less

SeaTalk 1 to SeaTalkng Converter KitThe SeaTalk 1 to Seatalkng converter allows select SeaTalk 1 devices to interface and communicate on the Raymarine SeaTalkng data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag Wireless Man Overboard Systems. The SeaTalk to SeaTalkng Converter kit is a compact solution that connects in-line with the SeaTalkng instrument network. The converter kit includes all of the necessary components to interface to SeaTalk 1 devices, and establish basic SeaTalkng connectivity on the vessel including: SeaTalk 1 to SeaTalkng converter SeaTalkng Terminators (x2) SeaTalkng Blanking Plugs (x2) 400mm (15") SeaTalk 1 to SeaTalkng converter cable SeaTalkng power cable 1m (3.3') SeaTalkng spur cable Features: Easy plug-and-play connectivity with SeaTalkng networks. Works with select SeaTalk 1 instruments, GPS sensors and LifeTag. Included SeaTalkng components establish basic backbone connectivity. Easily expanded using Raymairne SeaTalkng network components. Owner's Manual (pdf)

Read more less

Type 1 Pump 12voltReversing hydraulic pump for use with steering systems equipped with 4.914 cubic inch (80cc 230cc) hydraulic steering rams. The Type 1 hydraulic drive is compatible with both S1/S1G and S2/S2G corepacks. Use the table below to determine the Type 1 hydraulic drive's capacity when used with each corepackCorepack Used S1 or S1GRam Capacity 4.9in - 10.5in (80CC-172CC)Maximum Stall Pressure at 12V 750psi (50bar) (no load) 67in/min (1000cc/min)Corepack Used S2 or S2GRam Capacity 4.9in - 14in (80cc - 230cc)Maximum StallPressure at 12V 750psi (50bar)Peak Flow Rate(no load) 67in/min (1000CC/min) Specifications: Type: Pumps/Drives Box Dimensions: 4"H x 5"W x 10"L WT: 5.6 lbs UPC: 023193811208 Owner's Manual (pdf)

Read more less

Bail Mount with Knobs Use our replacement bail mount with knobs to surface mount your GPSMAP® device.Compatible Devices:GPSMAP® 720GPSMAP® 720sGPSMAP® 740GPSMAP® 740sWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 5"W x 9"L WT: 0.33 lbs UPC: 753759102456

Read more less

20M Power & Ethernet Cable for HALO 2000 & 3000 SeriesSimrad's power and ethernet 20-meter cable specifically for the HALO 2000 and 3000 series. Specifications: Type: Power Cords Box Dimensions: 4"H x 12"W x 14"L WT: 3 lbs UPC: 9420064118212

Read more less